ARM: vexpress: Start using new Versatile Express infrastructure

This patch starts using all the configuration infrastructure.

- generic GPIO library is forced now

- sysreg GPIOs are used as MMC CD and WP information sources;
  thanks to this MMCI auxiliary data is not longer necessary

- DVI muxer and mode control is removed from non-DT V2P-CA9 code
  as this is now handled by the vexpress-dvi driver

- clock generators control is removed as is being handled by the
  common clock driver now

- the sysreg and sysctl control is now delegated to the
  appropriate drivers and all related code was removed

- NOR Flash set_vpp function has been removed as the control
  bit used does _not_ control its VPP line, but the #WP signal
  instead (which is de facto unusable in case of Linux MTD
  drivers); this also allowed the remove its DT auxiliary
  data

The non-DT code defines only minimal required number of
the config devices. Device Trees are updated to make use
of all new features.

Signed-off-by: Pawel Moll <pawel.moll@arm.com>
This commit is contained in:
Pawel Moll 2012-10-09 12:56:36 +01:00
parent 842839a37a
commit 38669e045d
8 changed files with 110 additions and 370 deletions

View File

@ -50,12 +50,6 @@
#define SCPCELLID2 0xFF8
#define SCPCELLID3 0xFFC
#define SCCTRL_TIMEREN0SEL_REFCLK (0 << 15)
#define SCCTRL_TIMEREN0SEL_TIMCLK (1 << 15)
#define SCCTRL_TIMEREN1SEL_REFCLK (0 << 17)
#define SCCTRL_TIMEREN1SEL_TIMCLK (1 << 17)
#define SCCTRL_TIMERENnSEL_SHIFT(n) (15 + ((n) * 2))
static inline void sysctl_soft_reset(void __iomem *base)

View File

@ -1,11 +1,12 @@
config ARCH_VEXPRESS
bool "ARM Ltd. Versatile Express family" if ARCH_MULTI_V7
select ARCH_WANT_OPTIONAL_GPIOLIB
select ARCH_REQUIRE_GPIOLIB
select ARM_AMBA
select ARM_GIC
select ARM_TIMER_SP804
select CLKDEV_LOOKUP
select COMMON_CLK
select COMMON_CLK_VERSATILE
select CPU_V7
select GENERIC_CLOCKEVENTS
select HAVE_CLK
@ -17,6 +18,7 @@ config ARCH_VEXPRESS
select PLAT_VERSATILE
select PLAT_VERSATILE_CLCD
select REGULATOR_FIXED_VOLTAGE if REGULATOR
select VEXPRESS_CONFIG
help
This option enables support for systems using Cortex processor based
ARM core and logic (FPGA) tiles on the Versatile Express motherboard,

View File

@ -4,7 +4,7 @@
ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include \
-I$(srctree)/arch/arm/plat-versatile/include
obj-y := v2m.o
obj-y := v2m.o reset.o
obj-$(CONFIG_ARCH_VEXPRESS_CA9X4) += ct-ca9x4.o
obj-$(CONFIG_SMP) += platsmp.o
obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o

View File

@ -9,6 +9,7 @@
#include <linux/amba/bus.h>
#include <linux/amba/clcd.h>
#include <linux/clkdev.h>
#include <linux/vexpress.h>
#include <asm/hardware/arm_timer.h>
#include <asm/hardware/cache-l2x0.h>
@ -64,19 +65,6 @@ static void __init ct_ca9x4_init_irq(void)
ca9x4_twd_init();
}
static void ct_ca9x4_clcd_enable(struct clcd_fb *fb)
{
u32 site = v2m_get_master_site();
/*
* Old firmware was using the "site" component of the command
* to control the DVI muxer (while it should be always 0 ie. MB).
* Newer firmware uses the data register. Keep both for compatibility.
*/
v2m_cfg_write(SYS_CFG_MUXFPGA | SYS_CFG_SITE(site), site);
v2m_cfg_write(SYS_CFG_DVIMODE | SYS_CFG_SITE(SYS_CFG_SITE_MB), 2);
}
static int ct_ca9x4_clcd_setup(struct clcd_fb *fb)
{
unsigned long framesize = 1024 * 768 * 2;
@ -93,7 +81,6 @@ static struct clcd_board ct_ca9x4_clcd_data = {
.caps = CLCD_CAP_5551 | CLCD_CAP_565,
.check = clcdfb_check,
.decode = clcdfb_decode,
.enable = ct_ca9x4_clcd_enable,
.setup = ct_ca9x4_clcd_setup,
.mmap = versatile_clcd_mmap_dma,
.remove = versatile_clcd_remove_dma,
@ -111,14 +98,6 @@ static struct amba_device *ct_ca9x4_amba_devs[] __initdata = {
&gpio_device,
};
static struct v2m_osc ct_osc1 = {
.osc = 1,
.rate_min = 10000000,
.rate_max = 80000000,
.rate_default = 23750000,
};
static struct resource pmu_resources[] = {
[0] = {
.start = IRQ_CT_CA9X4_PMU_CPU0,
@ -149,10 +128,18 @@ static struct platform_device pmu_device = {
.resource = pmu_resources,
};
static struct platform_device osc1_device = {
.name = "vexpress-osc",
.id = 1,
.num_resources = 1,
.resource = (struct resource []) {
VEXPRESS_RES_FUNC(0xf, 1),
},
};
static void __init ct_ca9x4_init(void)
{
int i;
struct clk *clk;
#ifdef CONFIG_CACHE_L2X0
void __iomem *l2x0_base = ioremap(CT_CA9X4_L2CC, SZ_4K);
@ -164,14 +151,14 @@ static void __init ct_ca9x4_init(void)
l2x0_init(l2x0_base, 0x00400000, 0xfe0fffff);
#endif
ct_osc1.site = v2m_get_master_site();
clk = v2m_osc_register("ct:osc1", &ct_osc1);
clk_register_clkdev(clk, NULL, "ct:clcd");
for (i = 0; i < ARRAY_SIZE(ct_ca9x4_amba_devs); i++)
amba_device_register(ct_ca9x4_amba_devs[i], &iomem_resource);
platform_device_register(&pmu_device);
platform_device_register(&osc1_device);
WARN_ON(clk_register_clkdev(vexpress_osc_setup(&osc1_device.dev),
NULL, "ct:clcd"));
}
#ifdef CONFIG_SMP

View File

@ -1,8 +1,6 @@
#ifndef __MACH_MOTHERBOARD_H
#define __MACH_MOTHERBOARD_H
#include <linux/clk-provider.h>
/*
* Physical addresses, offset from V2M_PA_CS0-3
*/
@ -41,31 +39,6 @@
#define V2M_CF (V2M_PA_CS7 + 0x0001a000)
#define V2M_CLCD (V2M_PA_CS7 + 0x0001f000)
/*
* Offsets from SYSREGS base
*/
#define V2M_SYS_ID 0x000
#define V2M_SYS_SW 0x004
#define V2M_SYS_LED 0x008
#define V2M_SYS_100HZ 0x024
#define V2M_SYS_FLAGS 0x030
#define V2M_SYS_FLAGSSET 0x030
#define V2M_SYS_FLAGSCLR 0x034
#define V2M_SYS_NVFLAGS 0x038
#define V2M_SYS_NVFLAGSSET 0x038
#define V2M_SYS_NVFLAGSCLR 0x03c
#define V2M_SYS_MCI 0x048
#define V2M_SYS_FLASH 0x03c
#define V2M_SYS_CFGSW 0x058
#define V2M_SYS_24MHZ 0x05c
#define V2M_SYS_MISC 0x060
#define V2M_SYS_DMA 0x064
#define V2M_SYS_PROCID0 0x084
#define V2M_SYS_PROCID1 0x088
#define V2M_SYS_CFGDATA 0x0a0
#define V2M_SYS_CFGCTRL 0x0a4
#define V2M_SYS_CFGSTAT 0x0a8
/*
* Interrupts. Those in {} are for AMBA devices
@ -90,43 +63,6 @@
#define IRQ_V2M_PCIE (32 + 17)
/*
* Configuration
*/
#define SYS_CFG_START (1 << 31)
#define SYS_CFG_WRITE (1 << 30)
#define SYS_CFG_OSC (1 << 20)
#define SYS_CFG_VOLT (2 << 20)
#define SYS_CFG_AMP (3 << 20)
#define SYS_CFG_TEMP (4 << 20)
#define SYS_CFG_RESET (5 << 20)
#define SYS_CFG_SCC (6 << 20)
#define SYS_CFG_MUXFPGA (7 << 20)
#define SYS_CFG_SHUTDOWN (8 << 20)
#define SYS_CFG_REBOOT (9 << 20)
#define SYS_CFG_DVIMODE (11 << 20)
#define SYS_CFG_POWER (12 << 20)
#define SYS_CFG_SITE(n) ((n) << 16)
#define SYS_CFG_SITE_MB 0
#define SYS_CFG_SITE_DB1 1
#define SYS_CFG_SITE_DB2 2
#define SYS_CFG_STACK(n) ((n) << 12)
#define SYS_CFG_ERR (1 << 1)
#define SYS_CFG_COMPLETE (1 << 0)
int v2m_cfg_write(u32 devfn, u32 data);
int v2m_cfg_read(u32 devfn, u32 *data);
void v2m_flags_set(u32 data);
/*
* Miscellaneous
*/
#define SYS_MISC_MASTERSITE (1 << 14)
#define SYS_PROCIDx_HBI_MASK 0xfff
int v2m_get_master_site(void);
/*
* Core tile IDs
*/
@ -149,21 +85,4 @@ struct ct_desc {
extern struct ct_desc *ct_desc;
/*
* OSC clock provider
*/
struct v2m_osc {
struct clk_hw hw;
u8 site; /* 0 = motherboard, 1 = site 1, 2 = site 2 */
u8 stack; /* board stack position */
u16 osc;
unsigned long rate_min;
unsigned long rate_max;
unsigned long rate_default;
};
#define to_v2m_osc(osc) container_of(osc, struct v2m_osc, hw)
struct clk *v2m_osc_register(const char *name, struct v2m_osc *osc);
#endif

View File

@ -13,6 +13,7 @@
#include <linux/smp.h>
#include <linux/io.h>
#include <linux/of_fdt.h>
#include <linux/vexpress.h>
#include <asm/smp_scu.h>
#include <asm/hardware/gic.h>
@ -193,7 +194,7 @@ static void __init vexpress_smp_prepare_cpus(unsigned int max_cpus)
* until it receives a soft interrupt, and then the
* secondary CPU branches to this address.
*/
v2m_flags_set(virt_to_phys(versatile_secondary_startup));
vexpress_flags_set(virt_to_phys(versatile_secondary_startup));
}
struct smp_operations __initdata vexpress_smp_ops = {

View File

@ -16,11 +16,10 @@
#include <linux/smsc911x.h>
#include <linux/spinlock.h>
#include <linux/usb/isp1760.h>
#include <linux/clkdev.h>
#include <linux/clk-provider.h>
#include <linux/mtd/physmap.h>
#include <linux/regulator/fixed.h>
#include <linux/regulator/machine.h>
#include <linux/vexpress.h>
#include <asm/arch_timer.h>
#include <asm/mach-types.h>
@ -33,7 +32,6 @@
#include <asm/hardware/cache-l2x0.h>
#include <asm/hardware/gic.h>
#include <asm/hardware/timer-sp.h>
#include <asm/hardware/sp810.h>
#include <mach/ct-ca9x4.h>
#include <mach/motherboard.h>
@ -58,22 +56,6 @@ static struct map_desc v2m_io_desc[] __initdata = {
},
};
static void __iomem *v2m_sysreg_base;
static void __init v2m_sysctl_init(void __iomem *base)
{
u32 scctrl;
if (WARN_ON(!base))
return;
/* Select 1MHz TIMCLK as the reference clock for SP804 timers */
scctrl = readl(base + SCCTRL);
scctrl |= SCCTRL_TIMEREN0SEL_TIMCLK;
scctrl |= SCCTRL_TIMEREN1SEL_TIMCLK;
writel(scctrl, base + SCCTRL);
}
static void __init v2m_sp804_init(void __iomem *base, unsigned int irq)
{
if (WARN_ON(!base || irq == NO_IRQ))
@ -87,69 +69,6 @@ static void __init v2m_sp804_init(void __iomem *base, unsigned int irq)
}
static DEFINE_SPINLOCK(v2m_cfg_lock);
int v2m_cfg_write(u32 devfn, u32 data)
{
/* Configuration interface broken? */
u32 val;
printk("%s: writing %08x to %08x\n", __func__, data, devfn);
devfn |= SYS_CFG_START | SYS_CFG_WRITE;
spin_lock(&v2m_cfg_lock);
val = readl(v2m_sysreg_base + V2M_SYS_CFGSTAT);
writel(val & ~SYS_CFG_COMPLETE, v2m_sysreg_base + V2M_SYS_CFGSTAT);
writel(data, v2m_sysreg_base + V2M_SYS_CFGDATA);
writel(devfn, v2m_sysreg_base + V2M_SYS_CFGCTRL);
do {
val = readl(v2m_sysreg_base + V2M_SYS_CFGSTAT);
} while (val == 0);
spin_unlock(&v2m_cfg_lock);
return !!(val & SYS_CFG_ERR);
}
int v2m_cfg_read(u32 devfn, u32 *data)
{
u32 val;
devfn |= SYS_CFG_START;
spin_lock(&v2m_cfg_lock);
writel(0, v2m_sysreg_base + V2M_SYS_CFGSTAT);
writel(devfn, v2m_sysreg_base + V2M_SYS_CFGCTRL);
mb();
do {
cpu_relax();
val = readl(v2m_sysreg_base + V2M_SYS_CFGSTAT);
} while (val == 0);
*data = readl(v2m_sysreg_base + V2M_SYS_CFGDATA);
spin_unlock(&v2m_cfg_lock);
return !!(val & SYS_CFG_ERR);
}
void __init v2m_flags_set(u32 data)
{
writel(~0, v2m_sysreg_base + V2M_SYS_FLAGSCLR);
writel(data, v2m_sysreg_base + V2M_SYS_FLAGSSET);
}
int v2m_get_master_site(void)
{
u32 misc = readl(v2m_sysreg_base + V2M_SYS_MISC);
return misc & SYS_MISC_MASTERSITE ? SYS_CFG_SITE_DB2 : SYS_CFG_SITE_DB1;
}
static struct resource v2m_pcie_i2c_resource = {
.start = V2M_SERIAL_BUS_PCI,
.end = V2M_SERIAL_BUS_PCI + SZ_4K - 1,
@ -237,14 +156,8 @@ static struct platform_device v2m_usb_device = {
.dev.platform_data = &v2m_usb_config,
};
static void v2m_flash_set_vpp(struct platform_device *pdev, int on)
{
writel(on != 0, v2m_sysreg_base + V2M_SYS_FLASH);
}
static struct physmap_flash_data v2m_flash_data = {
.width = 4,
.set_vpp = v2m_flash_set_vpp,
};
static struct resource v2m_flash_resources[] = {
@ -291,14 +204,61 @@ static struct platform_device v2m_cf_device = {
.dev.platform_data = &v2m_pata_data,
};
static unsigned int v2m_mmci_status(struct device *dev)
{
return readl(v2m_sysreg_base + V2M_SYS_MCI) & (1 << 0);
}
static struct mmci_platform_data v2m_mmci_data = {
.ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
.status = v2m_mmci_status,
.gpio_wp = VEXPRESS_GPIO_MMC_WPROT,
.gpio_cd = VEXPRESS_GPIO_MMC_CARDIN,
};
static struct resource v2m_sysreg_resources[] = {
{
.start = V2M_SYSREGS,
.end = V2M_SYSREGS + 0xfff,
.flags = IORESOURCE_MEM,
},
};
static struct platform_device v2m_sysreg_device = {
.name = "vexpress-sysreg",
.id = -1,
.resource = v2m_sysreg_resources,
.num_resources = ARRAY_SIZE(v2m_sysreg_resources),
};
static struct platform_device v2m_muxfpga_device = {
.name = "vexpress-muxfpga",
.id = 0,
.num_resources = 1,
.resource = (struct resource []) {
VEXPRESS_RES_FUNC(0, 7),
}
};
static struct platform_device v2m_shutdown_device = {
.name = "vexpress-shutdown",
.id = 0,
.num_resources = 1,
.resource = (struct resource []) {
VEXPRESS_RES_FUNC(0, 8),
}
};
static struct platform_device v2m_reboot_device = {
.name = "vexpress-reboot",
.id = 0,
.num_resources = 1,
.resource = (struct resource []) {
VEXPRESS_RES_FUNC(0, 9),
}
};
static struct platform_device v2m_dvimode_device = {
.name = "vexpress-dvimode",
.id = 0,
.num_resources = 1,
.resource = (struct resource []) {
VEXPRESS_RES_FUNC(0, 11),
}
};
static AMBA_APB_DEVICE(aaci, "mb:aaci", 0, V2M_AACI, IRQ_V2M_AACI, NULL);
@ -325,123 +285,9 @@ static struct amba_device *v2m_amba_devs[] __initdata = {
&rtc_device,
};
static unsigned long v2m_osc_recalc_rate(struct clk_hw *hw,
unsigned long parent_rate)
{
struct v2m_osc *osc = to_v2m_osc(hw);
return !parent_rate ? osc->rate_default : parent_rate;
}
static long v2m_osc_round_rate(struct clk_hw *hw, unsigned long rate,
unsigned long *parent_rate)
{
struct v2m_osc *osc = to_v2m_osc(hw);
if (WARN_ON(rate < osc->rate_min))
rate = osc->rate_min;
if (WARN_ON(rate > osc->rate_max))
rate = osc->rate_max;
return rate;
}
static int v2m_osc_set_rate(struct clk_hw *hw, unsigned long rate,
unsigned long parent_rate)
{
struct v2m_osc *osc = to_v2m_osc(hw);
v2m_cfg_write(SYS_CFG_OSC | SYS_CFG_SITE(osc->site) |
SYS_CFG_STACK(osc->stack) | osc->osc, rate);
return 0;
}
static struct clk_ops v2m_osc_ops = {
.recalc_rate = v2m_osc_recalc_rate,
.round_rate = v2m_osc_round_rate,
.set_rate = v2m_osc_set_rate,
};
struct clk * __init v2m_osc_register(const char *name, struct v2m_osc *osc)
{
struct clk_init_data init;
WARN_ON(osc->site > 2);
WARN_ON(osc->stack > 15);
WARN_ON(osc->osc > 4095);
init.name = name;
init.ops = &v2m_osc_ops;
init.flags = CLK_IS_ROOT;
init.num_parents = 0;
osc->hw.init = &init;
return clk_register(NULL, &osc->hw);
}
static struct v2m_osc v2m_mb_osc1 = {
.site = SYS_CFG_SITE_MB,
.osc = 1,
.rate_min = 23750000,
.rate_max = 63500000,
.rate_default = 23750000,
};
static const char *v2m_ref_clk_periphs[] __initconst = {
"mb:wdt", "1000f000.wdt", "1c0f0000.wdt", /* SP805 WDT */
};
static const char *v2m_osc1_periphs[] __initconst = {
"mb:clcd", "1001f000.clcd", "1c1f0000.clcd", /* PL111 CLCD */
};
static const char *v2m_osc2_periphs[] __initconst = {
"mb:mmci", "10005000.mmci", "1c050000.mmci", /* PL180 MMCI */
"mb:kmi0", "10006000.kmi", "1c060000.kmi", /* PL050 KMI0 */
"mb:kmi1", "10007000.kmi", "1c070000.kmi", /* PL050 KMI1 */
"mb:uart0", "10009000.uart", "1c090000.uart", /* PL011 UART0 */
"mb:uart1", "1000a000.uart", "1c0a0000.uart", /* PL011 UART1 */
"mb:uart2", "1000b000.uart", "1c0b0000.uart", /* PL011 UART2 */
"mb:uart3", "1000c000.uart", "1c0c0000.uart", /* PL011 UART3 */
};
static void __init v2m_clk_init(void)
{
struct clk *clk;
int i;
clk = clk_register_fixed_rate(NULL, "dummy_apb_pclk", NULL,
CLK_IS_ROOT, 0);
WARN_ON(clk_register_clkdev(clk, "apb_pclk", NULL));
clk = clk_register_fixed_rate(NULL, "mb:ref_clk", NULL,
CLK_IS_ROOT, 32768);
for (i = 0; i < ARRAY_SIZE(v2m_ref_clk_periphs); i++)
WARN_ON(clk_register_clkdev(clk, NULL, v2m_ref_clk_periphs[i]));
clk = clk_register_fixed_rate(NULL, "mb:sp804_clk", NULL,
CLK_IS_ROOT, 1000000);
WARN_ON(clk_register_clkdev(clk, "v2m-timer0", "sp804"));
WARN_ON(clk_register_clkdev(clk, "v2m-timer1", "sp804"));
clk = v2m_osc_register("mb:osc1", &v2m_mb_osc1);
for (i = 0; i < ARRAY_SIZE(v2m_osc1_periphs); i++)
WARN_ON(clk_register_clkdev(clk, NULL, v2m_osc1_periphs[i]));
clk = clk_register_fixed_rate(NULL, "mb:osc2", NULL,
CLK_IS_ROOT, 24000000);
for (i = 0; i < ARRAY_SIZE(v2m_osc2_periphs); i++)
WARN_ON(clk_register_clkdev(clk, NULL, v2m_osc2_periphs[i]));
}
static void __init v2m_timer_init(void)
{
v2m_sysctl_init(ioremap(V2M_SYSCTL, SZ_4K));
v2m_clk_init();
vexpress_clk_init(ioremap(V2M_SYSCTL, SZ_4K));
v2m_sp804_init(ioremap(V2M_TIMER01, SZ_4K), IRQ_V2M_TIMER0);
}
@ -453,19 +299,7 @@ static void __init v2m_init_early(void)
{
if (ct_desc->init_early)
ct_desc->init_early();
versatile_sched_clock_init(v2m_sysreg_base + V2M_SYS_24MHZ, 24000000);
}
static void v2m_power_off(void)
{
if (v2m_cfg_write(SYS_CFG_SHUTDOWN | SYS_CFG_SITE(SYS_CFG_SITE_MB), 0))
printk(KERN_EMERG "Unable to shutdown\n");
}
static void v2m_restart(char str, const char *cmd)
{
if (v2m_cfg_write(SYS_CFG_REBOOT | SYS_CFG_SITE(SYS_CFG_SITE_MB), 0))
printk(KERN_EMERG "Unable to reboot\n");
versatile_sched_clock_init(vexpress_get_24mhz_clock_base(), 24000000);
}
struct ct_desc *ct_desc;
@ -482,7 +316,7 @@ static void __init v2m_populate_ct_desc(void)
u32 current_tile_id;
ct_desc = NULL;
current_tile_id = readl(v2m_sysreg_base + V2M_SYS_PROCID0)
current_tile_id = vexpress_get_procid(VEXPRESS_SITE_MASTER)
& V2M_CT_ID_MASK;
for (i = 0; i < ARRAY_SIZE(ct_descs) && !ct_desc; ++i)
@ -498,7 +332,7 @@ static void __init v2m_populate_ct_desc(void)
static void __init v2m_map_io(void)
{
iotable_init(v2m_io_desc, ARRAY_SIZE(v2m_io_desc));
v2m_sysreg_base = ioremap(V2M_SYSREGS, SZ_4K);
vexpress_sysreg_early_init(ioremap(V2M_SYSREGS, SZ_4K));
v2m_populate_ct_desc();
ct_desc->map_io();
}
@ -515,6 +349,12 @@ static void __init v2m_init(void)
regulator_register_fixed(0, v2m_eth_supplies,
ARRAY_SIZE(v2m_eth_supplies));
platform_device_register(&v2m_muxfpga_device);
platform_device_register(&v2m_shutdown_device);
platform_device_register(&v2m_reboot_device);
platform_device_register(&v2m_dvimode_device);
platform_device_register(&v2m_sysreg_device);
platform_device_register(&v2m_pcie_i2c_device);
platform_device_register(&v2m_ddc_i2c_device);
platform_device_register(&v2m_flash_device);
@ -525,7 +365,7 @@ static void __init v2m_init(void)
for (i = 0; i < ARRAY_SIZE(v2m_amba_devs); i++)
amba_device_register(v2m_amba_devs[i], &iomem_resource);
pm_power_off = v2m_power_off;
pm_power_off = vexpress_power_off;
ct_desc->init_tile();
}
@ -539,7 +379,7 @@ MACHINE_START(VEXPRESS, "ARM-Versatile Express")
.timer = &v2m_timer,
.handle_irq = gic_handle_irq,
.init_machine = v2m_init,
.restart = v2m_restart,
.restart = vexpress_restart,
MACHINE_END
static struct map_desc v2m_rs1_io_desc __initdata = {
@ -580,20 +420,13 @@ void __init v2m_dt_map_io(void)
void __init v2m_dt_init_early(void)
{
struct device_node *node;
u32 dt_hbi;
node = of_find_compatible_node(NULL, NULL, "arm,vexpress-sysreg");
v2m_sysreg_base = of_iomap(node, 0);
if (WARN_ON(!v2m_sysreg_base))
return;
vexpress_sysreg_of_early_init();
/* Confirm board type against DT property, if available */
if (of_property_read_u32(allnodes, "arm,hbi", &dt_hbi) == 0) {
int site = v2m_get_master_site();
u32 id = readl(v2m_sysreg_base + (site == SYS_CFG_SITE_DB2 ?
V2M_SYS_PROCID1 : V2M_SYS_PROCID0));
u32 hbi = id & SYS_PROCIDx_HBI_MASK;
u32 hbi = vexpress_get_hbi(VEXPRESS_SITE_MASTER);
if (WARN_ON(dt_hbi != hbi))
pr_warning("vexpress: DT HBI (%x) is not matching "
@ -617,10 +450,7 @@ static void __init v2m_dt_timer_init(void)
const char *path;
int err;
node = of_find_compatible_node(NULL, NULL, "arm,sp810");
v2m_sysctl_init(of_iomap(node, 0));
v2m_clk_init();
vexpress_clk_of_init();
err = of_property_read_string(of_aliases, "arm,v2m_timer", &path);
if (WARN_ON(err))
@ -631,33 +461,29 @@ static void __init v2m_dt_timer_init(void)
twd_local_timer_of_register();
if (arch_timer_sched_clock_init() != 0)
versatile_sched_clock_init(v2m_sysreg_base + V2M_SYS_24MHZ, 24000000);
versatile_sched_clock_init(vexpress_get_24mhz_clock_base(),
24000000);
}
static struct sys_timer v2m_dt_timer = {
.init = v2m_dt_timer_init,
};
static struct of_dev_auxdata v2m_dt_auxdata_lookup[] __initdata = {
OF_DEV_AUXDATA("arm,vexpress-flash", V2M_NOR0, "physmap-flash",
&v2m_flash_data),
OF_DEV_AUXDATA("arm,primecell", V2M_MMCI, "mb:mmci", &v2m_mmci_data),
/* RS1 memory map */
OF_DEV_AUXDATA("arm,vexpress-flash", 0x08000000, "physmap-flash",
&v2m_flash_data),
OF_DEV_AUXDATA("arm,primecell", 0x1c050000, "mb:mmci", &v2m_mmci_data),
static const struct of_device_id v2m_dt_bus_match[] __initconst = {
{ .compatible = "simple-bus", },
{ .compatible = "arm,amba-bus", },
{ .compatible = "arm,vexpress,config-bus", },
{}
};
static void __init v2m_dt_init(void)
{
l2x0_of_init(0x00400000, 0xfe0fffff);
of_platform_populate(NULL, of_default_bus_match_table,
v2m_dt_auxdata_lookup, NULL);
pm_power_off = v2m_power_off;
of_platform_populate(NULL, v2m_dt_bus_match, NULL, NULL);
pm_power_off = vexpress_power_off;
}
const static char *v2m_dt_match[] __initconst = {
static const char * const v2m_dt_match[] __initconst = {
"arm,vexpress",
"xen,xenvm",
NULL,
@ -672,5 +498,5 @@ DT_MACHINE_START(VEXPRESS_DT, "ARM-Versatile Express")
.timer = &v2m_dt_timer,
.init_machine = v2m_dt_init,
.handle_irq = gic_handle_irq,
.restart = v2m_restart,
.restart = vexpress_restart,
MACHINE_END

View File

@ -107,4 +107,15 @@ unsigned __vexpress_get_site(struct device *dev, struct device_node *node);
void vexpress_sysreg_early_init(void __iomem *base);
void vexpress_sysreg_of_early_init(void);
void vexpress_power_off(void);
void vexpress_restart(char str, const char *cmd);
/* Clocks */
struct clk *vexpress_osc_setup(struct device *dev);
void vexpress_osc_of_setup(struct device_node *node);
void vexpress_clk_init(void __iomem *sp810_base);
void vexpress_clk_of_init(void);
#endif