hollalinux
/
linux-sg2042
mirror of https://github.com/sophgo/linux-riscv.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

tty/serial/8250: make UART_MCR register access consistent 

Introduce serial8250_out_MCR() and serial8250_in_MCR() routines, that
replace following calls:

serial_out(port, UART_MCR, val)
serial_port_out(up, UART_MCR, val)
serial_in(port, UART_MCR)

This patch is needed in order to integrate reading/writing of MCR
signals via SERIAL_MCTRL_GPIO infrastructure later.

Reviewed-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
Yegor Yefremov 2016-05-31 10:59:15 +02:00 committed by Greg Kroah-Hartman
parent 692aa19056
commit 36fd95b17e
3 changed files with 35 additions and 26 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

10
drivers/tty/serial/8250/8250.h
View File

@ -129,6 +129,16 @@ void serial8250_rpm_put(struct uart_8250_port *p);
int serial8250_em485_init(struct uart_8250_port *p); int serial8250_em485_init(struct uart_8250_port *p);
void serial8250_em485_destroy(struct uart_8250_port *p); void serial8250_em485_destroy(struct uart_8250_port *p);
static inline void serial8250_out_MCR(struct uart_8250_port *up, int value)
{
serial_out(up, UART_MCR, value);
}
static inline int serial8250_in_MCR(struct uart_8250_port *up)
{
return serial_in(up, UART_MCR);
}
#if defined(__alpha__) && !defined(CONFIG_PCI) #if defined(__alpha__) && !defined(CONFIG_PCI)
/* /*
* Digital did something really horribly wrong with the OUT1 and OUT2 * Digital did something really horribly wrong with the OUT1 and OUT2

4
drivers/tty/serial/8250/8250_omap.c
View File

@ -280,7 +280,7 @@ static void omap8250_restore_regs(struct uart_8250_port *up)
serial_out(up, UART_EFR, UART_EFR_ECB); serial_out(up, UART_EFR, UART_EFR_ECB);
serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A); serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A);
serial_out(up, UART_MCR, UART_MCR_TCRTLR); serial8250_out_MCR(up, UART_MCR_TCRTLR);
serial_out(up, UART_FCR, up->fcr); serial_out(up, UART_FCR, up->fcr);
omap8250_update_scr(up, priv); omap8250_update_scr(up, priv);
@ -296,7 +296,7 @@ static void omap8250_restore_regs(struct uart_8250_port *up)
serial_out(up, UART_LCR, 0); serial_out(up, UART_LCR, 0);
/* drop TCR + TLR access, we setup XON/XOFF later */ /* drop TCR + TLR access, we setup XON/XOFF later */
serial_out(up, UART_MCR, up->mcr); serial8250_out_MCR(up, up->mcr);
serial_out(up, UART_IER, up->ier); serial_out(up, UART_IER, up->ier);
serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);

47
drivers/tty/serial/8250/8250_port.c
View File

@ -527,13 +527,13 @@ static void serial8250_clear_fifos(struct uart_8250_port *p)
static inline void serial8250_em485_rts_after_send(struct uart_8250_port *p) static inline void serial8250_em485_rts_after_send(struct uart_8250_port *p)
{ {
unsigned char mcr = serial_in(p, UART_MCR); unsigned char mcr = serial8250_in_MCR(p);
if (p->port.rs485.flags & SER_RS485_RTS_AFTER_SEND) if (p->port.rs485.flags & SER_RS485_RTS_AFTER_SEND)
mcr |= UART_MCR_RTS; mcr |= UART_MCR_RTS;
else else
mcr &= ~UART_MCR_RTS; mcr &= ~UART_MCR_RTS;
serial_out(p, UART_MCR, mcr); serial8250_out_MCR(p, mcr);
} }
static void serial8250_em485_handle_start_tx(unsigned long arg); static void serial8250_em485_handle_start_tx(unsigned long arg);
@ -785,10 +785,10 @@ static int size_fifo(struct uart_8250_port *up)
old_lcr = serial_in(up, UART_LCR); old_lcr = serial_in(up, UART_LCR);
serial_out(up, UART_LCR, 0); serial_out(up, UART_LCR, 0);
old_fcr = serial_in(up, UART_FCR); old_fcr = serial_in(up, UART_FCR);
old_mcr = serial_in(up, UART_MCR); old_mcr = serial8250_in_MCR(up);
serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO | serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO |
UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT); UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT);
serial_out(up, UART_MCR, UART_MCR_LOOP); serial8250_out_MCR(up, UART_MCR_LOOP);
serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A); serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A);
old_dl = serial_dl_read(up); old_dl = serial_dl_read(up);
serial_dl_write(up, 0x0001); serial_dl_write(up, 0x0001);
@ -800,7 +800,7 @@ static int size_fifo(struct uart_8250_port *up)
(count < 256); count++) (count < 256); count++)
serial_in(up, UART_RX); serial_in(up, UART_RX);
serial_out(up, UART_FCR, old_fcr); serial_out(up, UART_FCR, old_fcr);
serial_out(up, UART_MCR, old_mcr); serial8250_out_MCR(up, old_mcr);
serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A); serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A);
serial_dl_write(up, old_dl); serial_dl_write(up, old_dl);
serial_out(up, UART_LCR, old_lcr); serial_out(up, UART_LCR, old_lcr);
@ -1040,17 +1040,17 @@ static void autoconfig_16550a(struct uart_8250_port *up)
* it's changed. If so, set baud_base in EXCR2 to 921600. -- dwmw2 * it's changed. If so, set baud_base in EXCR2 to 921600. -- dwmw2
*/ */
serial_out(up, UART_LCR, 0); serial_out(up, UART_LCR, 0);
status1 = serial_in(up, UART_MCR); status1 = serial8250_in_MCR(up);
serial_out(up, UART_LCR, 0xE0); serial_out(up, UART_LCR, 0xE0);
status2 = serial_in(up, 0x02); /* EXCR1 */ status2 = serial_in(up, 0x02); /* EXCR1 */
if (!((status2 ^ status1) & UART_MCR_LOOP)) { if (!((status2 ^ status1) & UART_MCR_LOOP)) {
serial_out(up, UART_LCR, 0); serial_out(up, UART_LCR, 0);
serial_out(up, UART_MCR, status1 ^ UART_MCR_LOOP); serial8250_out_MCR(up, status1 ^ UART_MCR_LOOP);
serial_out(up, UART_LCR, 0xE0); serial_out(up, UART_LCR, 0xE0);
status2 = serial_in(up, 0x02); /* EXCR1 */ status2 = serial_in(up, 0x02); /* EXCR1 */
serial_out(up, UART_LCR, 0); serial_out(up, UART_LCR, 0);
serial_out(up, UART_MCR, status1); serial8250_out_MCR(up, status1);
if ((status2 ^ status1) & UART_MCR_LOOP) { if ((status2 ^ status1) & UART_MCR_LOOP) {
unsigned short quot; unsigned short quot;
@ -1224,7 +1224,7 @@ static void autoconfig(struct uart_8250_port *up)
} }
} }
save_mcr = serial_in(up, UART_MCR); save_mcr = serial8250_in_MCR(up);
save_lcr = serial_in(up, UART_LCR); save_lcr = serial_in(up, UART_LCR);
/* /*
@ -1237,9 +1237,9 @@ static void autoconfig(struct uart_8250_port *up)
* that conflicts with COM 1-4 --- we hope! * that conflicts with COM 1-4 --- we hope!
*/ */
if (!(port->flags & UPF_SKIP_TEST)) { if (!(port->flags & UPF_SKIP_TEST)) {
serial_out(up, UART_MCR, UART_MCR_LOOP | 0x0A); serial8250_out_MCR(up, UART_MCR_LOOP | 0x0A);
status1 = serial_in(up, UART_MSR) & 0xF0; status1 = serial_in(up, UART_MSR) & 0xF0;
serial_out(up, UART_MCR, save_mcr); serial8250_out_MCR(up, save_mcr);
if (status1 != 0x90) { if (status1 != 0x90) {
spin_unlock_irqrestore(&port->lock, flags); spin_unlock_irqrestore(&port->lock, flags);
DEBUG_AUTOCONF("LOOP test failed (%02x) ", DEBUG_AUTOCONF("LOOP test failed (%02x) ",
@ -1305,7 +1305,7 @@ static void autoconfig(struct uart_8250_port *up)
if (port->type == PORT_RSA) if (port->type == PORT_RSA)
serial_out(up, UART_RSA_FRR, 0); serial_out(up, UART_RSA_FRR, 0);
#endif #endif
serial_out(up, UART_MCR, save_mcr); serial8250_out_MCR(up, save_mcr);
serial8250_clear_fifos(up); serial8250_clear_fifos(up);
serial_in(up, UART_RX); serial_in(up, UART_RX);
if (up->capabilities & UART_CAP_UUE) if (up->capabilities & UART_CAP_UUE)
@ -1353,19 +1353,18 @@ static void autoconfig_irq(struct uart_8250_port *up)
/* forget possible initially masked and pending IRQ */ /* forget possible initially masked and pending IRQ */
probe_irq_off(probe_irq_on()); probe_irq_off(probe_irq_on());
save_mcr = serial_in(up, UART_MCR); save_mcr = serial8250_in_MCR(up);
save_ier = serial_in(up, UART_IER); save_ier = serial_in(up, UART_IER);
serial_out(up, UART_MCR, UART_MCR_OUT1 | UART_MCR_OUT2); serial8250_out_MCR(up, UART_MCR_OUT1 | UART_MCR_OUT2);
irqs = probe_irq_on(); irqs = probe_irq_on();
serial_out(up, UART_MCR, 0); serial8250_out_MCR(up, 0);
udelay(10); udelay(10);
if (port->flags & UPF_FOURPORT) { if (port->flags & UPF_FOURPORT) {
serial_out(up, UART_MCR, serial8250_out_MCR(up, UART_MCR_DTR | UART_MCR_RTS);
UART_MCR_DTR | UART_MCR_RTS);
} else { } else {
serial_out(up, UART_MCR, serial8250_out_MCR(up,
UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2); UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2);
} }
serial_out(up, UART_IER, 0x0f); /* enable all intrs */ serial_out(up, UART_IER, 0x0f); /* enable all intrs */
serial_in(up, UART_LSR); serial_in(up, UART_LSR);
@ -1376,7 +1375,7 @@ static void autoconfig_irq(struct uart_8250_port *up)
udelay(20); udelay(20);
irq = probe_irq_off(irqs); irq = probe_irq_off(irqs);
serial_out(up, UART_MCR, save_mcr); serial8250_out_MCR(up, save_mcr);
serial_out(up, UART_IER, save_ier); serial_out(up, UART_IER, save_ier);
if (port->flags & UPF_FOURPORT) if (port->flags & UPF_FOURPORT)
@ -1549,14 +1548,14 @@ static inline void start_tx_rs485(struct uart_port *port)
del_timer(&em485->stop_tx_timer); del_timer(&em485->stop_tx_timer);
em485->active_timer = NULL; em485->active_timer = NULL;
mcr = serial_in(up, UART_MCR); mcr = serial8250_in_MCR(up);
if (!!(up->port.rs485.flags & SER_RS485_RTS_ON_SEND) != if (!!(up->port.rs485.flags & SER_RS485_RTS_ON_SEND) !=
!!(mcr & UART_MCR_RTS)) { !!(mcr & UART_MCR_RTS)) {
if (up->port.rs485.flags & SER_RS485_RTS_ON_SEND) if (up->port.rs485.flags & SER_RS485_RTS_ON_SEND)
mcr |= UART_MCR_RTS; mcr |= UART_MCR_RTS;
else else
mcr &= ~UART_MCR_RTS; mcr &= ~UART_MCR_RTS;
serial_out(up, UART_MCR, mcr); serial8250_out_MCR(up, mcr);
if (up->port.rs485.delay_rts_before_send > 0) { if (up->port.rs485.delay_rts_before_send > 0) {
em485->active_timer = &em485->start_tx_timer; em485->active_timer = &em485->start_tx_timer;
@ -1943,7 +1942,7 @@ void serial8250_do_set_mctrl(struct uart_port *port, unsigned int mctrl)
mcr = (mcr & up->mcr_mask) | up->mcr_force | up->mcr; mcr = (mcr & up->mcr_mask) | up->mcr_force | up->mcr;
serial_port_out(port, UART_MCR, mcr); serial8250_out_MCR(up, mcr);
} }
EXPORT_SYMBOL_GPL(serial8250_do_set_mctrl); EXPORT_SYMBOL_GPL(serial8250_do_set_mctrl);
@ -3090,7 +3089,7 @@ static void serial8250_console_restore(struct uart_8250_port *up)
serial8250_set_divisor(port, baud, quot, frac); serial8250_set_divisor(port, baud, quot, frac);
serial_port_out(port, UART_LCR, up->lcr); serial_port_out(port, UART_LCR, up->lcr);
serial_port_out(port, UART_MCR, UART_MCR_DTR | UART_MCR_RTS); serial8250_out_MCR(up, UART_MCR_DTR | UART_MCR_RTS);
} }
/* /*