OMAP3 clock: introduce DPLL4 Jtype

DPLL4 for 3630 introduces a changed block called j type dpll, requiring
special divisor bits and additional reg fields. To allow for silicons to
use this, this is introduced as a flag and is enabled for 3630 silicon.
OMAP4 also has j type dpll for usb.

Tested with 3630 ZOOM3 and OMAP3430 ZOOM2

Signed-off-by: Richard Woodruff <r-woodruff2@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Vishwanath BS <Vishwanath.bs@ti.com>
[paul@pwsan.com: added some comments; updated copyrights and credits; fixed
 some style issues]
Signed-off-by: Paul Walmsley <paul@pwsan.com>
This commit is contained in:
Richard Woodruff 2010-02-22 22:09:08 -07:00 committed by Paul Walmsley
parent 91808a81fe
commit 358965d7ba
6 changed files with 109 additions and 5 deletions

View File

@ -47,6 +47,10 @@
#define DPLL_LOW_POWER_BYPASS 0x5
#define DPLL_LOCKED 0x7
/* DPLL Type and DCO Selection Flags */
#define DPLL_J_TYPE 0x1
#define DPLL_NO_DCO_SEL 0x2
int omap2_clk_enable(struct clk *clk);
void omap2_clk_disable(struct clk *clk);
long omap2_clk_round_rate(struct clk *clk, unsigned long rate);

View File

@ -38,6 +38,7 @@
/* Maximum DPLL multiplier, divider values for OMAP3 */
#define OMAP3_MAX_DPLL_MULT 2048
#define OMAP3630_MAX_JTYPE_DPLL_MULT 4095
#define OMAP3_MAX_DPLL_DIV 128
/*
@ -529,7 +530,8 @@ static struct clk emu_core_alwon_ck = {
/* DPLL4 */
/* Supplies 96MHz, 54Mhz TV DAC, DSS fclk, CAM sensor clock, emul trace clk */
/* Type: DPLL */
static struct dpll_data dpll4_dd = {
static struct dpll_data dpll4_dd;
static struct dpll_data dpll4_dd_34xx __initdata = {
.mult_div1_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL2),
.mult_mask = OMAP3430_PERIPH_DPLL_MULT_MASK,
.div1_mask = OMAP3430_PERIPH_DPLL_DIV_MASK,
@ -552,6 +554,29 @@ static struct dpll_data dpll4_dd = {
.rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE
};
static struct dpll_data dpll4_dd_3630 __initdata = {
.mult_div1_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL2),
.mult_mask = OMAP3630_PERIPH_DPLL_MULT_MASK,
.div1_mask = OMAP3430_PERIPH_DPLL_DIV_MASK,
.clk_bypass = &sys_ck,
.clk_ref = &sys_ck,
.control_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
.enable_mask = OMAP3430_EN_PERIPH_DPLL_MASK,
.modes = (1 << DPLL_LOW_POWER_STOP) | (1 << DPLL_LOCKED),
.auto_recal_bit = OMAP3430_EN_PERIPH_DPLL_DRIFTGUARD_SHIFT,
.recal_en_bit = OMAP3430_PERIPH_DPLL_RECAL_EN_SHIFT,
.recal_st_bit = OMAP3430_PERIPH_DPLL_ST_SHIFT,
.autoidle_reg = OMAP_CM_REGADDR(PLL_MOD, CM_AUTOIDLE),
.autoidle_mask = OMAP3430_AUTO_PERIPH_DPLL_MASK,
.idlest_reg = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
.idlest_mask = OMAP3430_ST_PERIPH_CLK_MASK,
.max_multiplier = OMAP3630_MAX_JTYPE_DPLL_MULT,
.min_divider = 1,
.max_divider = OMAP3_MAX_DPLL_DIV,
.rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE,
.flags = DPLL_J_TYPE
};
static struct clk dpll4_ck = {
.name = "dpll4_ck",
.ops = &omap3_clkops_noncore_dpll_ops,
@ -3377,6 +3402,11 @@ int __init omap3xxx_clk_init(void)
&clkops_omap36xx_pwrdn_with_hsdiv_wait_restore;
}
if (cpu_is_omap3630())
dpll4_dd = dpll4_dd_3630;
else
dpll4_dd = dpll4_dd_34xx;
clk_init(&omap2_clk_functions);
for (c = omap3xxx_clks; c < omap3xxx_clks + ARRAY_SIZE(omap3xxx_clks); c++)

View File

@ -980,6 +980,7 @@ static struct dpll_data dpll_usb_dd = {
.max_multiplier = OMAP4430_MAX_DPLL_MULT,
.max_divider = OMAP4430_MAX_DPLL_DIV,
.min_divider = 1,
.flags = DPLL_J_TYPE | DPLL_NO_DCO_SEL
};

View File

@ -531,8 +531,13 @@
/* CM_CLKSEL2_PLL */
#define OMAP3430_PERIPH_DPLL_MULT_SHIFT 8
#define OMAP3430_PERIPH_DPLL_MULT_MASK (0x7ff << 8)
#define OMAP3630_PERIPH_DPLL_MULT_MASK (0xfff << 8)
#define OMAP3430_PERIPH_DPLL_DIV_SHIFT 0
#define OMAP3430_PERIPH_DPLL_DIV_MASK (0x7f << 0)
#define OMAP3630_PERIPH_DPLL_DCO_SEL_SHIFT 21
#define OMAP3630_PERIPH_DPLL_DCO_SEL_MASK (0x7 << 21)
#define OMAP3630_PERIPH_DPLL_SD_DIV_SHIFT 24
#define OMAP3630_PERIPH_DPLL_SD_DIV_MASK (0xff << 24)
/* CM_CLKSEL3_PLL */
#define OMAP3430_DIV_96M_SHIFT 0

View File

@ -1,11 +1,14 @@
/*
* OMAP3/4 - specific DPLL control functions
*
* Copyright (C) 2009 Texas Instruments, Inc.
* Copyright (C) 2009 Nokia Corporation
* Copyright (C) 2009-2010 Texas Instruments, Inc.
* Copyright (C) 2009-2010 Nokia Corporation
*
* Written by Paul Walmsley
* Testing and integration fixes by Jouni gander
* Testing and integration fixes by Jouni Högander
*
* 36xx support added by Vishwanath BS, Richard Woodruff, and Nishanth
* Menon
*
* Parts of this code are based on code written by
* Richard Woodruff, Tony Lindgren, Tuukka Tikkanen, Karthik Dasu
@ -225,6 +228,47 @@ static int _omap3_noncore_dpll_stop(struct clk *clk)
return 0;
}
/**
* lookup_dco_sddiv - Set j-type DPLL4 compensation variables
* @clk: pointer to a DPLL struct clk
* @dco: digital control oscillator selector
* @sd_div: target sigma-delta divider
* @m: DPLL multiplier to set
* @n: DPLL divider to set
*
* See 36xx TRM section 3.5.3.3.3.2 "Type B DPLL (Low-Jitter)"
*
* XXX This code is not needed for 3430/AM35xx; can it be optimized
* out in non-multi-OMAP builds for those chips?
*/
static void lookup_dco_sddiv(struct clk *clk, u8 *dco, u8 *sd_div, u16 m,
u8 n)
{
unsigned long fint, clkinp, sd; /* watch out for overflow */
int mod1, mod2;
clkinp = clk->parent->rate;
fint = (clkinp / n) * m;
if (fint < 1000000000)
*dco = 2;
else
*dco = 4;
/*
* target sigma-delta to near 250MHz
* sd = ceil[(m/(n+1)) * (clkinp_MHz / 250)]
*/
clkinp /= 100000; /* shift from MHz to 10*Hz for 38.4 and 19.2 */
mod1 = (clkinp * m) % (250 * n);
sd = (clkinp * m) / (250 * n);
mod2 = sd % 10;
sd /= 10;
if (mod1 || mod2)
sd++;
*sd_div = sd;
}
/*
* _omap3_noncore_dpll_program - set non-core DPLL M,N values directly
* @clk: struct clk * of DPLL to set
@ -259,6 +303,21 @@ static int omap3_noncore_dpll_program(struct clk *clk, u16 m, u8 n, u16 freqsel)
v &= ~(dd->mult_mask | dd->div1_mask);
v |= m << __ffs(dd->mult_mask);
v |= (n - 1) << __ffs(dd->div1_mask);
/*
* XXX This code is not needed for 3430/AM35XX; can it be optimized
* out in non-multi-OMAP builds for those chips?
*/
if ((dd->flags & DPLL_J_TYPE) && !(dd->flags & DPLL_NO_DCO_SEL)) {
u8 dco, sd_div;
lookup_dco_sddiv(clk, &dco, &sd_div, m, n);
/* XXX This probably will need revision for OMAP4 */
v &= ~(OMAP3630_PERIPH_DPLL_DCO_SEL_MASK
| OMAP3630_PERIPH_DPLL_SD_DIV_MASK);
v |= dco << __ffs(OMAP3630_PERIPH_DPLL_DCO_SEL_MASK);
v |= sd_div << __ffs(OMAP3630_PERIPH_DPLL_SD_DIV_MASK);
}
__raw_writel(v, dd->mult_div1_reg);
/* We let the clock framework set the other output dividers later */
@ -536,7 +595,7 @@ unsigned long omap3_clkoutx2_recalc(struct clk *clk)
v = __raw_readl(dd->control_reg) & dd->enable_mask;
v >>= __ffs(dd->enable_mask);
if (v != OMAP3XXX_EN_DPLL_LOCKED)
if ((v != OMAP3XXX_EN_DPLL_LOCKED) || (dd->flags & DPLL_J_TYPE))
rate = clk->parent->rate;
else
rate = clk->parent->rate * 2;

View File

@ -41,6 +41,10 @@ struct clksel {
const struct clksel_rate *rates;
};
/*
* A new flag called flag has been added which indicates what is the
* type of dpll (like j_type, no_dco_sel)
*/
struct dpll_data {
void __iomem *mult_div1_reg;
u32 mult_mask;
@ -67,6 +71,7 @@ struct dpll_data {
u8 auto_recal_bit;
u8 recal_en_bit;
u8 recal_st_bit;
u8 flags;
# endif
};