hollalinux
/
linux-sg2042
mirror of https://github.com/sophgo/linux-riscv.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

via-rhine: delete non NAPI code from the driver. 

Compile-tested only.

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
This commit is contained in:
Francois Romieu 2008-07-11 00:30:14 +02:00 committed by Jeff Garzik
parent 4422b00390
commit 32b0f53e5b
2 changed files with 2 additions and 36 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

11
drivers/net/Kconfig
View File

@ -1694,17 +1694,6 @@ config VIA_RHINE_MMIO
If unsure, say Y.
config VIA_RHINE_NAPI
bool "Use Rx Polling (NAPI)"
depends on VIA_RHINE
help
NAPI is a new driver API designed to reduce CPU and interrupt load
when the driver is receiving lots of packets from the card.
If your estimated Rx load is 10kpps or more, or if the card will be
deployed on potentially unfriendly networks (e.g. in a firewall),
then say Y here.
config LAN_SAA9730
bool "Philips SAA9730 Ethernet support"
depends on NET_PCI && PCI && MIPS_ATLAS

27
drivers/net/via-rhine.c
View File

@ -73,12 +73,7 @@ static const int multicast_filter_limit = 32;
There are no ill effects from too-large receive rings. */
#define TX_RING_SIZE 16
#define TX_QUEUE_LEN 10 /* Limit ring entries actually used. */
#ifdef CONFIG_VIA_RHINE_NAPI
#define RX_RING_SIZE 64
#else
#define RX_RING_SIZE 16
#endif
/* Operational parameters that usually are not changed. */
@ -583,7 +578,6 @@ static void rhine_poll(struct net_device *dev)
}
#endif
#ifdef CONFIG_VIA_RHINE_NAPI
static int rhine_napipoll(struct napi_struct *napi, int budget)
{
struct rhine_private *rp = container_of(napi, struct rhine_private, napi);
@ -604,7 +598,6 @@ static int rhine_napipoll(struct napi_struct *napi, int budget)
}
return work_done;
}
#endif
static void __devinit rhine_hw_init(struct net_device *dev, long pioaddr)
{
@ -784,9 +777,8 @@ static int __devinit rhine_init_one(struct pci_dev *pdev,
#ifdef CONFIG_NET_POLL_CONTROLLER
dev->poll_controller = rhine_poll;
#endif
#ifdef CONFIG_VIA_RHINE_NAPI
netif_napi_add(dev, &rp->napi, rhine_napipoll, 64);
#endif
if (rp->quirks & rqRhineI)
dev->features |= NETIF_F_SG|NETIF_F_HW_CSUM;
@ -1056,9 +1048,7 @@ static void init_registers(struct net_device *dev)
rhine_set_rx_mode(dev);
#ifdef CONFIG_VIA_RHINE_NAPI
napi_enable(&rp->napi);
#endif
/* Enable interrupts by setting the interrupt mask. */
iowrite16(IntrRxDone | IntrRxErr | IntrRxEmpty| IntrRxOverflow |
@ -1193,9 +1183,7 @@ static void rhine_tx_timeout(struct net_device *dev)
/* protect against concurrent rx interrupts */
disable_irq(rp->pdev->irq);
#ifdef CONFIG_VIA_RHINE_NAPI
napi_disable(&rp->napi);
#endif
spin_lock(&rp->lock);
@ -1319,16 +1307,12 @@ static irqreturn_t rhine_interrupt(int irq, void *dev_instance)
if (intr_status & (IntrRxDone | IntrRxErr | IntrRxDropped |
IntrRxWakeUp | IntrRxEmpty | IntrRxNoBuf)) {
#ifdef CONFIG_VIA_RHINE_NAPI
iowrite16(IntrTxAborted |
IntrTxDone | IntrTxError | IntrTxUnderrun |
IntrPCIErr | IntrStatsMax | IntrLinkChange,
ioaddr + IntrEnable);
netif_rx_schedule(dev, &rp->napi);
#else
rhine_rx(dev, RX_RING_SIZE);
#endif
}
if (intr_status & (IntrTxErrSummary | IntrTxDone)) {
@ -1520,11 +1504,7 @@ static int rhine_rx(struct net_device *dev, int limit)
PCI_DMA_FROMDEVICE);
}
skb->protocol = eth_type_trans(skb, dev);
#ifdef CONFIG_VIA_RHINE_NAPI
netif_receive_skb(skb);
#else
netif_rx(skb);
#endif
dev->last_rx = jiffies;
rp->stats.rx_bytes += pkt_len;
rp->stats.rx_packets++;
@ -1836,9 +1816,7 @@ static int rhine_close(struct net_device *dev)
spin_lock_irq(&rp->lock);
netif_stop_queue(dev);
#ifdef CONFIG_VIA_RHINE_NAPI
napi_disable(&rp->napi);
#endif
if (debug > 1)
printk(KERN_DEBUG "%s: Shutting down ethercard, "
@ -1937,9 +1915,8 @@ static int rhine_suspend(struct pci_dev *pdev, pm_message_t state)
if (!netif_running(dev))
return 0;
#ifdef CONFIG_VIA_RHINE_NAPI
napi_disable(&rp->napi);
#endif
netif_device_detach(dev);
pci_save_state(pdev);