drm/i915: add port power domains

Parts that poke port specific HW blocks like the encoder HW state
readout or connector hotplug detect code need a way to check whether
required power domains are on or enable/disable these. For this purpose
add a set of power domains that refer to the port HW blocks. Get the
proper port power domains during modeset.

For now when requesting the power domain for a DDI port get it for a 4
lane configuration. This can be optimized later to request only the 2
lane power domain, when proper support is added on the VLV PHY side for
this. Atm, the PHY setup code assumes a 4 lane config in all cases.

Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drivers/gpu/drm/i915/i915_debugfs.c

@@ -2048,6 +2048,28 @@ static const char *power_domain_str(enum intel_display_power_domain domain)
 		return "TRANSCODER_C";
 	case POWER_DOMAIN_TRANSCODER_EDP:
 		return "TRANSCODER_EDP";
+	case POWER_DOMAIN_PORT_DDI_A_2_LANES:
+		return "PORT_DDI_A_2_LANES";
+	case POWER_DOMAIN_PORT_DDI_A_4_LANES:
+		return "PORT_DDI_A_4_LANES";
+	case POWER_DOMAIN_PORT_DDI_B_2_LANES:
+		return "PORT_DDI_B_2_LANES";
+	case POWER_DOMAIN_PORT_DDI_B_4_LANES:
+		return "PORT_DDI_B_4_LANES";
+	case POWER_DOMAIN_PORT_DDI_C_2_LANES:
+		return "PORT_DDI_C_2_LANES";
+	case POWER_DOMAIN_PORT_DDI_C_4_LANES:
+		return "PORT_DDI_C_4_LANES";
+	case POWER_DOMAIN_PORT_DDI_D_2_LANES:
+		return "PORT_DDI_D_2_LANES";
+	case POWER_DOMAIN_PORT_DDI_D_4_LANES:
+		return "PORT_DDI_D_4_LANES";
+	case POWER_DOMAIN_PORT_DSI:
+		return "PORT_DSI";
+	case POWER_DOMAIN_PORT_CRT:
+		return "PORT_CRT";
+	case POWER_DOMAIN_PORT_OTHER:
+		return "PORT_OTHER";
 	case POWER_DOMAIN_VGA:
 		return "VGA";
 	case POWER_DOMAIN_AUDIO:

drivers/gpu/drm/i915/i915_drv.h

@@ -114,6 +114,17 @@ enum intel_display_power_domain {
 	POWER_DOMAIN_TRANSCODER_B,
 	POWER_DOMAIN_TRANSCODER_C,
 	POWER_DOMAIN_TRANSCODER_EDP,
+	POWER_DOMAIN_PORT_DDI_A_2_LANES,
+	POWER_DOMAIN_PORT_DDI_A_4_LANES,
+	POWER_DOMAIN_PORT_DDI_B_2_LANES,
+	POWER_DOMAIN_PORT_DDI_B_4_LANES,
+	POWER_DOMAIN_PORT_DDI_C_2_LANES,
+	POWER_DOMAIN_PORT_DDI_C_4_LANES,
+	POWER_DOMAIN_PORT_DDI_D_2_LANES,
+	POWER_DOMAIN_PORT_DDI_D_4_LANES,
+	POWER_DOMAIN_PORT_DSI,
+	POWER_DOMAIN_PORT_CRT,
+	POWER_DOMAIN_PORT_OTHER,
 	POWER_DOMAIN_VGA,
 	POWER_DOMAIN_AUDIO,
 	POWER_DOMAIN_INIT,

drivers/gpu/drm/i915/intel_display.c

@@ -3962,9 +3962,49 @@ static void i9xx_pfit_enable(struct intel_crtc *crtc)
 	for ((domain) = 0; (domain) < POWER_DOMAIN_NUM; (domain)++)	\
 		if ((1 << (domain)) & (mask))
 
-static unsigned long get_pipe_power_domains(struct drm_device *dev,
-					    enum pipe pipe, bool pfit_enabled)
+enum intel_display_power_domain
+intel_display_port_power_domain(struct intel_encoder *intel_encoder)
 {
+	struct drm_device *dev = intel_encoder->base.dev;
+	struct intel_digital_port *intel_dig_port;
+
+	switch (intel_encoder->type) {
+	case INTEL_OUTPUT_UNKNOWN:
+		/* Only DDI platforms should ever use this output type */
+		WARN_ON_ONCE(!HAS_DDI(dev));
+	case INTEL_OUTPUT_DISPLAYPORT:
+	case INTEL_OUTPUT_HDMI:
+	case INTEL_OUTPUT_EDP:
+		intel_dig_port = enc_to_dig_port(&intel_encoder->base);
+		switch (intel_dig_port->port) {
+		case PORT_A:
+			return POWER_DOMAIN_PORT_DDI_A_4_LANES;
+		case PORT_B:
+			return POWER_DOMAIN_PORT_DDI_B_4_LANES;
+		case PORT_C:
+			return POWER_DOMAIN_PORT_DDI_C_4_LANES;
+		case PORT_D:
+			return POWER_DOMAIN_PORT_DDI_D_4_LANES;
+		default:
+			WARN_ON_ONCE(1);
+			return POWER_DOMAIN_PORT_OTHER;
+		}
+	case INTEL_OUTPUT_ANALOG:
+		return POWER_DOMAIN_PORT_CRT;
+	case INTEL_OUTPUT_DSI:
+		return POWER_DOMAIN_PORT_DSI;
+	default:
+		return POWER_DOMAIN_PORT_OTHER;
+	}
+}
+
+static unsigned long get_crtc_power_domains(struct drm_crtc *crtc)
+{
+	struct drm_device *dev = crtc->dev;
+	struct intel_encoder *intel_encoder;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	enum pipe pipe = intel_crtc->pipe;
+	bool pfit_enabled = intel_crtc->config.pch_pfit.enabled;
 	unsigned long mask;
 	enum transcoder transcoder;
 
@@ -3975,6 +4015,9 @@ static unsigned long get_pipe_power_domains(struct drm_device *dev,
 	if (pfit_enabled)
 		mask |= BIT(POWER_DOMAIN_PIPE_PANEL_FITTER(pipe));
 
+	for_each_encoder_on_crtc(dev, crtc, intel_encoder)
+		mask |= BIT(intel_display_port_power_domain(intel_encoder));
+
 	return mask;
 }
 
@@ -4008,9 +4051,7 @@ static void modeset_update_crtc_power_domains(struct drm_device *dev)
 		if (!crtc->base.enabled)
 			continue;
 
-		pipe_domains[crtc->pipe] = get_pipe_power_domains(dev,
-						crtc->pipe,
-						crtc->config.pch_pfit.enabled);
+		pipe_domains[crtc->pipe] = get_crtc_power_domains(&crtc->base);
 
 		for_each_power_domain(domain, pipe_domains[crtc->pipe])
 			intel_display_power_get(dev_priv, domain);

drivers/gpu/drm/i915/intel_drv.h

@@ -733,6 +733,8 @@ bool intel_crtc_active(struct drm_crtc *crtc);
 void hsw_enable_ips(struct intel_crtc *crtc);
 void hsw_disable_ips(struct intel_crtc *crtc);
 void intel_display_set_init_power(struct drm_i915_private *dev, bool enable);
+enum intel_display_power_domain
+intel_display_port_power_domain(struct intel_encoder *intel_encoder);
 int valleyview_get_vco(struct drm_i915_private *dev_priv);
 void intel_mode_from_pipe_config(struct drm_display_mode *mode,
 				 struct intel_crtc_config *pipe_config);

drivers/gpu/drm/i915/intel_pm.c

@@ -5483,6 +5483,15 @@ EXPORT_SYMBOL_GPL(i915_release_power_well);
 #define HSW_ALWAYS_ON_POWER_DOMAINS (			\
 	BIT(POWER_DOMAIN_PIPE_A) |			\
 	BIT(POWER_DOMAIN_TRANSCODER_EDP) |		\
+	BIT(POWER_DOMAIN_PORT_DDI_A_2_LANES) |		\
+	BIT(POWER_DOMAIN_PORT_DDI_A_4_LANES) |		\
+	BIT(POWER_DOMAIN_PORT_DDI_B_2_LANES) |		\
+	BIT(POWER_DOMAIN_PORT_DDI_B_4_LANES) |		\
+	BIT(POWER_DOMAIN_PORT_DDI_C_2_LANES) |		\
+	BIT(POWER_DOMAIN_PORT_DDI_C_4_LANES) |		\
+	BIT(POWER_DOMAIN_PORT_DDI_D_2_LANES) |		\
+	BIT(POWER_DOMAIN_PORT_DDI_D_4_LANES) |		\
+	BIT(POWER_DOMAIN_PORT_CRT) |			\
 	BIT(POWER_DOMAIN_INIT))
 #define HSW_DISPLAY_POWER_DOMAINS (				\
 	(POWER_DOMAIN_MASK & ~HSW_ALWAYS_ON_POWER_DOMAINS) |	\