pcmcia: dev_node removal (write-only drivers)

dev_node_t was only used to transport some minor/major numbers
from the PCMCIA device drivers to deprecated userspace helpers.
However, only a few drivers made use of it, and the userspace
helpers are deprecated anyways. Therefore, get rid of dev_node_t .

As a first step, remove any usage of dev_node_t from drivers which
only wrote to this typedef/struct, but did not make use of it.

CC: linux-bluetooth@vger.kernel.org
CC: Harald Welte <laforge@gnumonks.org>
CC: linux-mtd@lists.infradead.org
CC: linux-wireless@vger.kernel.org
CC: netdev@vger.kernel.org
CC: linux-serial@vger.kernel.org
CC: alsa-devel@alsa-project.org
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
This commit is contained in:
Dominik Brodowski 2010-03-20 19:26:51 +01:00
parent b1577190e7
commit 317b6d6300
21 changed files with 2 additions and 111 deletions

View File

@ -65,7 +65,6 @@ MODULE_LICENSE("GPL");
typedef struct bluecard_info_t {
struct pcmcia_device *p_dev;
dev_node_t node;
struct hci_dev *hdev;
@ -916,9 +915,6 @@ static int bluecard_config(struct pcmcia_device *link)
if (bluecard_open(info) != 0)
goto failed;
strcpy(info->node.dev_name, info->hdev->name);
link->dev_node = &info->node;
return 0;
failed:

View File

@ -72,7 +72,6 @@ MODULE_FIRMWARE("BT3CPCC.bin");
typedef struct bt3c_info_t {
struct pcmcia_device *p_dev;
dev_node_t node;
struct hci_dev *hdev;
@ -751,9 +750,6 @@ found_port:
if (bt3c_open(info) != 0)
goto failed;
strcpy(info->node.dev_name, info->hdev->name);
link->dev_node = &info->node;
return 0;
failed:

View File

@ -67,7 +67,6 @@ MODULE_LICENSE("GPL");
typedef struct btuart_info_t {
struct pcmcia_device *p_dev;
dev_node_t node;
struct hci_dev *hdev;
@ -680,9 +679,6 @@ found_port:
if (btuart_open(info) != 0)
goto failed;
strcpy(info->node.dev_name, info->hdev->name);
link->dev_node = &info->node;
return 0;
failed:

View File

@ -67,7 +67,6 @@ MODULE_LICENSE("GPL");
typedef struct dtl1_info_t {
struct pcmcia_device *p_dev;
dev_node_t node;
struct hci_dev *hdev;
@ -629,9 +628,6 @@ static int dtl1_config(struct pcmcia_device *link)
if (dtl1_open(info) != 0)
goto failed;
strcpy(info->node.dev_name, info->hdev->name);
link->dev_node = &info->node;
return 0;
failed:

View File

@ -72,7 +72,6 @@ static struct class *cmx_class;
struct reader_dev {
struct pcmcia_device *p_dev;
dev_node_t node;
wait_queue_head_t devq;
wait_queue_head_t poll_wait;
wait_queue_head_t read_wait;
@ -568,10 +567,6 @@ static int reader_config(struct pcmcia_device *link, int devno)
}
dev = link->priv;
sprintf(dev->node.dev_name, DEVICE_NAME "%d", devno);
dev->node.major = major;
dev->node.minor = devno;
dev->node.next = &dev->node;
DEBUGP(2, dev, "device " DEVICE_NAME "%d at 0x%.4x-0x%.4x\n", devno,
link->io.BasePort1, link->io.BasePort1+link->io.NumPorts1);

View File

@ -52,7 +52,6 @@ static const int debug = 0;
struct pcmciamtd_dev {
struct pcmcia_device *p_dev;
dev_node_t node; /* device node */
caddr_t win_base; /* ioremapped address of PCMCIA window */
unsigned int win_size; /* size of window */
unsigned int offset; /* offset into card the window currently points at */
@ -647,9 +646,7 @@ static int pcmciamtd_config(struct pcmcia_device *link)
pcmciamtd_release(link);
return -ENODEV;
}
snprintf(dev->node.dev_name, sizeof(dev->node.dev_name), "mtd%d", mtd->index);
info("mtd%d: %s", mtd->index, mtd->name);
link->dev_node = &dev->node;
return 0;
failed:

View File

@ -85,41 +85,7 @@ static void atmel_release(struct pcmcia_device *link);
static void atmel_detach(struct pcmcia_device *p_dev);
/*
You'll also need to prototype all the functions that will actually
be used to talk to your device. See 'pcmem_cs' for a good example
of a fully self-sufficient driver; the other drivers rely more or
less on other parts of the kernel.
*/
/*
A linked list of "instances" of the atmelnet device. Each actual
PCMCIA card corresponds to one device instance, and is described
by one struct pcmcia_device structure (defined in ds.h).
You may not want to use a linked list for this -- for example, the
memory card driver uses an array of struct pcmcia_device pointers, where minor
device numbers are used to derive the corresponding array index.
*/
/*
A driver needs to provide a dev_node_t structure for each device
on a card. In some cases, there is only one device per card (for
example, ethernet cards, modems). In other cases, there may be
many actual or logical devices (SCSI adapters, memory cards with
multiple partitions). The dev_node_t structures need to be kept
in a linked list starting at the 'dev' field of a struct pcmcia_device
structure. We allocate them in the card's private data structure,
because they generally shouldn't be allocated dynamically.
In this case, we also provide a flag to indicate if a device is
"stopped" due to a power management event, or card ejection. The
device IO routines can use a flag like this to throttle IO to a
card that is not ready to accept it.
*/
typedef struct local_info_t {
dev_node_t node;
struct net_device *eth_dev;
} local_info_t;
@ -297,14 +263,6 @@ static int atmel_config(struct pcmcia_device *link)
goto failed;
/*
At this point, the dev_node_t structure(s) need to be
initialized and arranged in a linked list at link->dev_node.
*/
strcpy(dev->node.dev_name, ((local_info_t*)link->priv)->eth_dev->name );
dev->node.major = dev->node.minor = 0;
link->dev_node = &dev->node;
return 0;
failed:

View File

@ -39,7 +39,6 @@ MODULE_PARM_DESC(ignore_cis_vcc, "Ignore broken CIS VCC entry");
/* struct local_info::hw_priv */
struct hostap_cs_priv {
dev_node_t node;
struct pcmcia_device *link;
int sandisk_connectplus;
};
@ -625,8 +624,6 @@ static int prism2_config(struct pcmcia_device *link)
local = iface->local;
local->hw_priv = hw_priv;
hw_priv->link = link;
strcpy(hw_priv->node.dev_name, dev->name);
link->dev_node = &hw_priv->node;
ret = pcmcia_request_irq(link, prism2_interrupt);
if (ret)
@ -665,11 +662,9 @@ static int prism2_config(struct pcmcia_device *link)
sandisk_enable_wireless(dev);
ret = prism2_hw_config(dev, 1);
if (!ret) {
if (!ret)
ret = hostap_hw_ready(dev);
if (ret == 0 && local->ddev)
strcpy(hw_priv->node.dev_name, local->ddev->name);
}
return ret;
failed:

View File

@ -75,7 +75,6 @@ INT_MODULE_PARM(epp_mode, 1);
typedef struct parport_info_t {
struct pcmcia_device *p_dev;
int ndev;
dev_node_t node;
struct parport *port;
} parport_info_t;
@ -193,11 +192,7 @@ static int parport_config(struct pcmcia_device *link)
if (epp_mode)
p->modes |= PARPORT_MODE_TRISTATE | PARPORT_MODE_EPP;
info->ndev = 1;
info->node.major = LP_MAJOR;
info->node.minor = p->number;
info->port = p;
strcpy(info->node.dev_name, p->name);
link->dev_node = &info->node;
return 0;

View File

@ -80,7 +80,6 @@ MODULE_LICENSE("Dual MPL/GPL");
typedef struct scsi_info_t {
struct pcmcia_device *p_dev;
dev_node_t node;
struct Scsi_Host *host;
} scsi_info_t;
@ -185,8 +184,6 @@ static int aha152x_config_cs(struct pcmcia_device *link)
goto failed;
}
sprintf(info->node.dev_name, "scsi%d", host->host_no);
link->dev_node = &info->node;
info->host = host;
return 0;

View File

@ -63,7 +63,6 @@ MODULE_LICENSE("Dual MPL/GPL");
typedef struct scsi_info_t {
struct pcmcia_device *p_dev;
dev_node_t node;
struct Scsi_Host *host;
} scsi_info_t;
@ -155,8 +154,6 @@ static int fdomain_config(struct pcmcia_device *link)
goto failed;
scsi_scan_host(host);
sprintf(info->node.dev_name, "scsi%d", host->host_no);
link->dev_node = &info->node;
info->host = host;
return 0;

View File

@ -1754,8 +1754,6 @@ static int nsp_cs_config(struct pcmcia_device *link)
scsi_scan_host(host);
snprintf(info->node.dev_name, sizeof(info->node.dev_name), "scsi%d", host->host_no);
link->dev_node = &info->node;
info->host = host;
/* Finally, report what we've done */
@ -1813,7 +1811,6 @@ static void nsp_cs_release(struct pcmcia_device *link)
if (info->host != NULL) {
scsi_remove_host(info->host);
}
link->dev_node = NULL;
if (link->win) {
if (data != NULL) {

View File

@ -224,7 +224,6 @@
typedef struct scsi_info_t {
struct pcmcia_device *p_dev;
struct Scsi_Host *host;
dev_node_t node;
int stop;
} scsi_info_t;

View File

@ -82,7 +82,6 @@ static struct scsi_host_template qlogicfas_driver_template = {
typedef struct scsi_info_t {
struct pcmcia_device *p_dev;
dev_node_t node;
struct Scsi_Host *host;
unsigned short manf_id;
} scsi_info_t;
@ -235,8 +234,6 @@ static int qlogic_config(struct pcmcia_device * link)
goto failed;
}
sprintf(info->node.dev_name, "scsi%d", host->host_no);
link->dev_node = &info->node;
info->host = host;
return 0;

View File

@ -191,7 +191,6 @@
struct scsi_info_t {
struct pcmcia_device *p_dev;
dev_node_t node;
struct Scsi_Host *host;
unsigned short manf_id;
};
@ -792,8 +791,6 @@ SYM53C500_config(struct pcmcia_device *link)
*/
data->fast_pio = USE_FAST_PIO;
sprintf(info->node.dev_name, "scsi%d", host->host_no);
link->dev_node = &info->node;
info->host = host;
if (scsi_add_host(host, NULL))

View File

@ -89,7 +89,6 @@ struct serial_info {
int manfid;
int prodid;
int c950ctrl;
dev_node_t node[4];
int line[4];
const struct serial_quirk *quirk;
};
@ -289,8 +288,6 @@ static void serial_remove(struct pcmcia_device *link)
for (i = 0; i < info->ndev; i++)
serial8250_unregister_port(info->line[i]);
info->p_dev->dev_node = NULL;
if (!info->slave)
pcmcia_disable_device(link);
}
@ -410,11 +407,6 @@ static int setup_serial(struct pcmcia_device *handle, struct serial_info * info,
}
info->line[info->ndev] = line;
sprintf(info->node[info->ndev].dev_name, "ttyS%d", line);
info->node[info->ndev].major = TTY_MAJOR;
info->node[info->ndev].minor = 0x40 + line;
if (info->ndev > 0)
info->node[info->ndev - 1].next = &info->node[info->ndev];
info->ndev++;
return 0;
@ -711,7 +703,6 @@ static int serial_config(struct pcmcia_device * link)
if (info->quirk->post(link))
goto failed;
link->dev_node = &info->node[0];
return 0;
failed:

View File

@ -22,7 +22,6 @@
typedef struct ixj_info_t {
int ndev;
dev_node_t node;
struct ixj *port;
} ixj_info_t;
@ -155,8 +154,6 @@ static int ixj_config(struct pcmcia_device * link)
j = ixj_pcmcia_probe(link->io.BasePort1, link->io.BasePort1 + 0x10);
info->ndev = 1;
info->node.major = PHONE_MAJOR;
link->dev_node = &info->node;
ixj_get_serial(link, j);
return 0;

View File

@ -234,7 +234,6 @@ static int pdacf_config(struct pcmcia_device *link)
if (snd_pdacf_assign_resources(pdacf, link->io.BasePort1, link->irq) < 0)
goto failed;
link->dev_node = &pdacf->node;
return 0;
failed:

View File

@ -117,7 +117,6 @@ struct snd_pdacf {
/* pcmcia stuff */
struct pcmcia_device *p_dev;
dev_node_t node;
};
static inline void pdacf_reg_write(struct snd_pdacf *chip, unsigned char reg, unsigned short val)

View File

@ -211,7 +211,6 @@ static int snd_vxpocket_assign_resources(struct vx_core *chip, int port, int irq
static int vxpocket_config(struct pcmcia_device *link)
{
struct vx_core *chip = link->priv;
struct snd_vxpocket *vxp = (struct snd_vxpocket *)chip;
int ret;
snd_printdd(KERN_DEBUG "vxpocket_config called\n");
@ -245,7 +244,6 @@ static int vxpocket_config(struct pcmcia_device *link)
if (snd_vxpocket_assign_resources(chip, link->io.BasePort1, link->irq) < 0)
goto failed;
link->dev_node = &vxp->node;
return 0;
failed:

View File

@ -43,7 +43,6 @@ struct snd_vxpocket {
/* pcmcia stuff */
struct pcmcia_device *p_dev;
dev_node_t node;
};
extern struct snd_vx_ops snd_vxpocket_ops;