V4L/DVB (9028): saa7134: add support for the triple Asus Tiger 3in1
after looking it up, all rants about the 80 columns restriction seem to be in vain. After changing the card's name it are now "only" seven new lines in the tiny DVB-T/DVB-S switch function. saa7130/34: v4l2 driver version 0.2.14 loaded saa7133[0]: found at 0000:02:08.0, rev: 209, irq: 18, latency: 32, mmio: 0xfdef7000 saa7133[0]: subsystem: 1043:4878, board: Asus Tiger 3in1 [card=147,autodetected] saa7133[0]: board init: gpio is 200000 tuner' 2-004b: chip found @ 0x96 (saa7133[0]) saa7133[0]: i2c eeprom 00: 43 10 78 48 54 20 1c 00 43 43 a9 1c 55 d2 b2 92 saa7133[0]: i2c eeprom 10: ff ff ff 0f ff 20 ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 20: 01 40 01 02 03 01 01 03 08 ff 00 d7 ff ff ff ff saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 40: ff 28 00 c2 96 16 03 02 c0 1c ff ff ff ff ff ff saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c scan: found device @ 0x10 [???] saa7133[0]: i2c scan: found device @ 0x16 [???] saa7133[0]: i2c scan: found device @ 0x1c [???] saa7133[0]: i2c scan: found device @ 0x96 [???] saa7133[0]: i2c scan: found device @ 0xa0 [eeprom] tda829x 2-004b: setting tuner address to 61 tda829x 2-004b: type set to tda8290+75a saa7133[0]: registered device video0 [v4l2] saa7133[0]: registered device vbi0 saa7133[0]: registered device radio0 DVB: registering new adapter (saa7133[0]) DVB: registering frontend 0 (Philips TDA10086 DVB-S)... The board init gpio is 0x0, 0x200000 is from previously unloading with antenna_switch = 1. It needs firmware for the tda10046 and analog sound needs saa7134-alsa. I have support for one more board and need to fix the first revision of the Asus Tiger DVB-T hybrid. DVB-T currently hangs on the male radio antenna input, also some small other stuff. Please report any issues with this patch, the next are depending on this one. saa7134: add support for the triple Asus Tiger 3in1 Signed-off-by: Hermann Pitton <hermann-pitton@arcor.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
This commit is contained in:
hermann pitton
Mauro Carvalho Chehab
parent
e4aab64cb7
commit
301e9d64e0
|
|
@ -68,6 +68,7 @@
|
|||
67 -> Kworld PlusTV HD PCI 120 (ATSC 120) [17de:08c1]
|
||||
68 -> Hauppauge WinTV-HVR4000 DVB-S/S2/T/Hybrid [0070:6900,0070:6904,0070:6902]
|
||||
69 -> Hauppauge WinTV-HVR4000(Lite) DVB-S/S2 [0070:6905,0070:6906]
|
||||
70 -> TeVii S460 DVB-S/S2 [D460:9022]
|
||||
70 -> TeVii S460 DVB-S/S2 [d460:9022]
|
||||
71 -> Omicom SS4 DVB-S/S2 PCI [A044:2011]
|
||||
72 -> TBS 8920 DVB-S/S2 [8920:8888]
|
||||
73 -> TeVii S420 DVB-S [d420:9022]
|
||||
|
|
|
|||
|
|
@ -145,3 +145,4 @@
|
|||
144 -> Beholder BeholdTV M6 Extra [5ace:6193]
|
||||
145 -> AVerMedia MiniPCI DVB-T Hybrid M103 [1461:f636]
|
||||
146 -> ASUSTeK P7131 Analog
|
||||
147 -> Asus Tiger 3in1 [1043:4878]
|
||||
|
|
|
|||
|
|
@ -4409,6 +4409,36 @@ struct saa7134_board saa7134_boards[] = {
|
|||
/* no DVB support for now */
|
||||
/* .mpeg = SAA7134_MPEG_DVB, */
|
||||
},
|
||||
[SAA7134_BOARD_ASUSTeK_TIGER_3IN1] = {
|
||||
.name = "Asus Tiger 3in1",
|
||||
.audio_clock = 0x00187de7,
|
||||
.tuner_type = TUNER_PHILIPS_TDA8290,
|
||||
.radio_type = UNSET,
|
||||
.tuner_addr = ADDR_UNSET,
|
||||
.radio_addr = ADDR_UNSET,
|
||||
.tuner_config = 2,
|
||||
.gpiomask = 1 << 21,
|
||||
.mpeg = SAA7134_MPEG_DVB,
|
||||
.inputs = {{
|
||||
.name = name_tv,
|
||||
.vmux = 1,
|
||||
.amux = TV,
|
||||
.tv = 1,
|
||||
}, {
|
||||
.name = name_comp,
|
||||
.vmux = 0,
|
||||
.amux = LINE2,
|
||||
}, {
|
||||
.name = name_svideo,
|
||||
.vmux = 8,
|
||||
.amux = LINE2,
|
||||
} },
|
||||
.radio = {
|
||||
.name = name_radio,
|
||||
.amux = TV,
|
||||
.gpio = 0x0200000,
|
||||
},
|
||||
},
|
||||
};
|
||||
|
||||
const unsigned int saa7134_bcount = ARRAY_SIZE(saa7134_boards);
|
||||
|
|
@ -5431,6 +5461,12 @@ struct pci_device_id saa7134_pci_tbl[] = {
|
|||
.subvendor = 0x1461, /* Avermedia Technologies Inc */
|
||||
.subdevice = 0xf636,
|
||||
.driver_data = SAA7134_BOARD_AVERMEDIA_M103,
|
||||
}, {
|
||||
.vendor = PCI_VENDOR_ID_PHILIPS,
|
||||
.device = PCI_DEVICE_ID_PHILIPS_SAA7133,
|
||||
.subvendor = 0x1043,
|
||||
.subdevice = 0x4878, /* REV:1.02G */
|
||||
.driver_data = SAA7134_BOARD_ASUSTeK_TIGER_3IN1,
|
||||
}, {
|
||||
/* --- boards without eeprom + subsystem ID --- */
|
||||
.vendor = PCI_VENDOR_ID_PHILIPS,
|
||||
|
|
@ -6002,6 +6038,14 @@ int saa7134_board_init2(struct saa7134_dev *dev)
|
|||
i2c_transfer(&dev->i2c_adap, &msg, 1);
|
||||
break;
|
||||
}
|
||||
case SAA7134_BOARD_ASUSTeK_TIGER_3IN1:
|
||||
{
|
||||
u8 data[] = { 0x3c, 0x33, 0x60};
|
||||
struct i2c_msg msg = {.addr = 0x0b, .flags = 0, .buf = data,
|
||||
.len = sizeof(data)};
|
||||
i2c_transfer(&dev->i2c_adap, &msg, 1);
|
||||
break;
|
||||
}
|
||||
case SAA7134_BOARD_FLYDVB_TRIO:
|
||||
{
|
||||
u8 data[] = { 0x3c, 0x33, 0x62};
|
||||
|
|
|
|||
|
|
@ -799,6 +799,20 @@ static struct tda1004x_config twinhan_dtv_dvb_3056_config = {
|
|||
.request_firmware = philips_tda1004x_request_firmware
|
||||
};
|
||||
|
||||
static struct tda1004x_config asus_tiger_3in1_config = {
|
||||
.demod_address = 0x0b,
|
||||
.invert = 1,
|
||||
.invert_oclk = 0,
|
||||
.xtal_freq = TDA10046_XTAL_16M,
|
||||
.agc_config = TDA10046_AGC_TDA827X,
|
||||
.gpio_config = TDA10046_GP11_I,
|
||||
.if_freq = TDA10046_FREQ_045,
|
||||
.i2c_gate = 0x4b,
|
||||
.tuner_address = 0x61,
|
||||
.antenna_switch = 1,
|
||||
.request_firmware = philips_tda1004x_request_firmware
|
||||
};
|
||||
|
||||
/* ------------------------------------------------------------------
|
||||
* special case: this card uses saa713x GPIO22 for the mode switch
|
||||
*/
|
||||
|
|
@ -1300,6 +1314,31 @@ static int dvb_init(struct saa7134_dev *dev)
|
|||
&dev->i2c_adap);
|
||||
attach_xc3028 = 1;
|
||||
break;
|
||||
case SAA7134_BOARD_ASUSTeK_TIGER_3IN1:
|
||||
if (!use_frontend) { /* terrestrial */
|
||||
if (configure_tda827x_fe(dev, &asus_tiger_3in1_config,
|
||||
&tda827x_cfg_2) < 0)
|
||||
goto dettach_frontend;
|
||||
} else { /* satellite */
|
||||
dev->dvb.frontend = dvb_attach(tda10086_attach,
|
||||
&flydvbs, &dev->i2c_adap);
|
||||
if (dev->dvb.frontend) {
|
||||
if (dvb_attach(tda826x_attach,
|
||||
dev->dvb.frontend, 0x60,
|
||||
&dev->i2c_adap, 0) == NULL) {
|
||||
wprintk("%s: Asus Tiger 3in1, no "
|
||||
"tda826x found!\n", __func__);
|
||||
goto dettach_frontend;
|
||||
}
|
||||
if (dvb_attach(lnbp21_attach, dev->dvb.frontend,
|
||||
&dev->i2c_adap, 0, 0) == NULL) {
|
||||
wprintk("%s: Asus Tiger 3in1, no lnbp21"
|
||||
" found!\n", __func__);
|
||||
goto dettach_frontend;
|
||||
}
|
||||
}
|
||||
}
|
||||
break;
|
||||
default:
|
||||
wprintk("Huh? unknown DVB card?\n");
|
||||
break;
|
||||
|
|
|
|||
|
|
@ -269,6 +269,7 @@ struct saa7134_format {
|
|||
#define SAA7134_BOARD_BEHOLD_M6_EXTRA 144
|
||||
#define SAA7134_BOARD_AVERMEDIA_M103 145
|
||||
#define SAA7134_BOARD_ASUSTeK_P7131_ANALOG 146
|
||||
#define SAA7134_BOARD_ASUSTeK_TIGER_3IN1 147
|
||||
|
||||
#define SAA7134_MAXBOARDS 8
|
||||
#define SAA7134_INPUT_MAX 8
|
||||
|
|
|
|||
Loading…
Reference in New Issue