iio: distance: add dt binding for devantech-srf04
This patch adds dt binding for devantech ultrasonic ranger srf04. The vendor "devantech" was already added to the vendor list with "[PATCH v4 1/3] iio: distance: srf08: add trivial DT binding" Signed-off-by: Andreas Klinger <ak@it-klinger.de> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
This commit is contained in:
parent
6144f61af6
commit
2fb5904d92
|
@ -0,0 +1,28 @@
|
|||
* Devantech SRF04 ultrasonic range finder
|
||||
Bit-banging driver using two GPIOs
|
||||
|
||||
Required properties:
|
||||
- compatible: Should be "devantech,srf04"
|
||||
|
||||
- trig-gpios: Definition of the GPIO for the triggering (output)
|
||||
This GPIO is set for about 10 us by the driver to tell the
|
||||
device it should initiate the measurement cycle.
|
||||
|
||||
- echo-gpios: Definition of the GPIO for the echo (input)
|
||||
This GPIO is set by the device as soon as an ultrasonic
|
||||
burst is sent out and reset when the first echo is
|
||||
received.
|
||||
Thus this GPIO is set while the ultrasonic waves are doing
|
||||
one round trip.
|
||||
It needs to be an GPIO which is able to deliver an
|
||||
interrupt because the time between two interrupts is
|
||||
measured in the driver.
|
||||
See Documentation/devicetree/bindings/gpio/gpio.txt for
|
||||
information on how to specify a consumer gpio.
|
||||
|
||||
Example:
|
||||
srf04@0 {
|
||||
compatible = "devantech,srf04";
|
||||
trig-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
|
||||
echo-gpios = <&gpio2 6 GPIO_ACTIVE_HIGH>;
|
||||
};
|
Loading…
Reference in New Issue