IB: Use central enum for speed instead of hard-coded values

The kernel IB stack uses one enumeration for IB speed, which wasn't
explicitly specified in the verbs header file.  Add that enum, and use
it all over the code.

The IB speed/width notation is also used by iWARP and IBoE HW drivers,
which use the convention of rate = speed * width to advertise their
port link rate.

Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
This commit is contained in:
Or Gerlitz 2012-02-28 18:49:50 +02:00 committed by Roland Dreier
parent e9319b0cb0
commit 2e96691c31
8 changed files with 25 additions and 17 deletions

View File

@ -187,27 +187,26 @@ static ssize_t rate_show(struct ib_port *p, struct port_attribute *unused,
return ret;
switch (attr.active_speed) {
case 1:
/* SDR */
case IB_SPEED_SDR:
rate = 25;
break;
case 2:
case IB_SPEED_DDR:
speed = " DDR";
rate = 50;
break;
case 4:
case IB_SPEED_QDR:
speed = " QDR";
rate = 100;
break;
case 8:
case IB_SPEED_FDR10:
speed = " FDR10";
rate = 100;
break;
case 16:
case IB_SPEED_FDR:
speed = " FDR";
rate = 140;
break;
case 32:
case IB_SPEED_EDR:
speed = " EDR";
rate = 250;
break;

View File

@ -94,7 +94,7 @@ static int c2_query_port(struct ib_device *ibdev,
props->pkey_tbl_len = 1;
props->qkey_viol_cntr = 0;
props->active_width = 1;
props->active_speed = 1;
props->active_speed = IB_SPEED_SDR;
return 0;
}

View File

@ -1227,7 +1227,7 @@ static int iwch_query_port(struct ib_device *ibdev,
props->gid_tbl_len = 1;
props->pkey_tbl_len = 1;
props->active_width = 2;
props->active_speed = 2;
props->active_speed = IB_SPEED_DDR;
props->max_msg_sz = -1;
return 0;

View File

@ -329,7 +329,7 @@ static int c4iw_query_port(struct ib_device *ibdev, u8 port,
props->gid_tbl_len = 1;
props->pkey_tbl_len = 1;
props->active_width = 2;
props->active_speed = 2;
props->active_speed = IB_SPEED_DDR;
props->max_msg_sz = -1;
return 0;

View File

@ -233,7 +233,7 @@ int ehca_query_port(struct ib_device *ibdev,
props->phys_state = 5;
props->state = rblock->state;
props->active_width = IB_WIDTH_12X;
props->active_speed = 0x1;
props->active_speed = IB_SPEED_SDR;
}
query_port1:

View File

@ -215,16 +215,16 @@ static int ib_link_query_port(struct ib_device *ibdev, u8 port,
switch (ext_active_speed) {
case 1:
props->active_speed = 16; /* FDR */
props->active_speed = IB_SPEED_FDR;
break;
case 2:
props->active_speed = 32; /* EDR */
props->active_speed = IB_SPEED_EDR;
break;
}
}
/* If reported active speed is QDR, check if is FDR-10 */
if (props->active_speed == 4) {
if (props->active_speed == IB_SPEED_QDR) {
if (to_mdev(ibdev)->dev->caps.ext_port_cap[port] &
MLX_EXT_PORT_CAP_FLAG_EXTENDED_PORT_INFO) {
init_query_mad(in_mad);
@ -238,7 +238,7 @@ static int ib_link_query_port(struct ib_device *ibdev, u8 port,
/* Checking LinkSpeedActive for FDR-10 */
if (out_mad->data[15] & 0x1)
props->active_speed = 8;
props->active_speed = IB_SPEED_FDR10;
}
}
@ -259,7 +259,7 @@ static int eth_link_query_port(struct ib_device *ibdev, u8 port,
enum ib_mtu tmp;
props->active_width = IB_WIDTH_1X;
props->active_speed = 4;
props->active_speed = IB_SPEED_QDR;
props->port_cap_flags = IB_PORT_CM_SUP;
props->gid_tbl_len = to_mdev(ibdev)->dev->caps.gid_table_len[port];
props->max_msg_sz = to_mdev(ibdev)->dev->caps.max_msg_sz;

View File

@ -597,7 +597,7 @@ static int nes_query_port(struct ib_device *ibdev, u8 port, struct ib_port_attr
props->pkey_tbl_len = 1;
props->qkey_viol_cntr = 0;
props->active_width = IB_WIDTH_4X;
props->active_speed = 1;
props->active_speed = IB_SPEED_SDR;
props->max_msg_sz = 0x80000000;
return 0;

View File

@ -239,6 +239,15 @@ static inline int ib_width_enum_to_int(enum ib_port_width width)
}
}
enum ib_port_speed {
IB_SPEED_SDR = 1,
IB_SPEED_DDR = 2,
IB_SPEED_QDR = 4,
IB_SPEED_FDR10 = 8,
IB_SPEED_FDR = 16,
IB_SPEED_EDR = 32
};
struct ib_protocol_stats {
/* TBD... */
};