ARM: at91: remove at91sam9261/at91sam9g10 legacy board support
Remove legacy support for at91sam9261/at91sam9g10 boards. This include board files removal plus all legacy code for non DT boards support. Use the Device Tree for running this board with newer kernels. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
This commit is contained in:
Nicolas Ferre
parent
9373090d9f
commit
2e591e7b3a
|
|
@ -1,147 +0,0 @@
|
|||
# CONFIG_LOCALVERSION_AUTO is not set
|
||||
CONFIG_KERNEL_LZMA=y
|
||||
# CONFIG_SWAP is not set
|
||||
CONFIG_SYSVIPC=y
|
||||
CONFIG_IKCONFIG=y
|
||||
CONFIG_IKCONFIG_PROC=y
|
||||
CONFIG_LOG_BUF_SHIFT=14
|
||||
CONFIG_NAMESPACES=y
|
||||
CONFIG_EMBEDDED=y
|
||||
CONFIG_SLAB=y
|
||||
CONFIG_MODULES=y
|
||||
CONFIG_MODULE_UNLOAD=y
|
||||
# CONFIG_BLK_DEV_BSG is not set
|
||||
# CONFIG_IOSCHED_DEADLINE is not set
|
||||
# CONFIG_IOSCHED_CFQ is not set
|
||||
CONFIG_ARCH_AT91=y
|
||||
CONFIG_ARCH_AT91SAM9261=y
|
||||
CONFIG_MACH_AT91SAM9261EK=y
|
||||
CONFIG_MACH_AT91SAM9G10EK=y
|
||||
# CONFIG_ARM_THUMB is not set
|
||||
CONFIG_AEABI=y
|
||||
CONFIG_ZBOOT_ROM_TEXT=0x0
|
||||
CONFIG_ZBOOT_ROM_BSS=0x0
|
||||
CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
|
||||
CONFIG_AUTO_ZRELADDR=y
|
||||
CONFIG_VFP=y
|
||||
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
|
||||
CONFIG_NET=y
|
||||
CONFIG_PACKET=y
|
||||
CONFIG_UNIX=y
|
||||
CONFIG_INET=y
|
||||
CONFIG_IP_MULTICAST=y
|
||||
CONFIG_IP_PNP=y
|
||||
CONFIG_IP_PNP_DHCP=y
|
||||
CONFIG_IP_PNP_BOOTP=y
|
||||
# CONFIG_INET_LRO is not set
|
||||
# CONFIG_IPV6 is not set
|
||||
CONFIG_CFG80211=y
|
||||
CONFIG_MAC80211=y
|
||||
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
|
||||
CONFIG_DEVTMPFS=y
|
||||
CONFIG_DEVTMPFS_MOUNT=y
|
||||
CONFIG_MTD=y
|
||||
CONFIG_MTD_CMDLINE_PARTS=y
|
||||
CONFIG_MTD_BLOCK=y
|
||||
CONFIG_MTD_NAND=y
|
||||
CONFIG_MTD_NAND_ATMEL=y
|
||||
CONFIG_MTD_UBI=y
|
||||
CONFIG_MTD_UBI_GLUEBI=y
|
||||
CONFIG_BLK_DEV_RAM=y
|
||||
CONFIG_BLK_DEV_RAM_SIZE=8192
|
||||
CONFIG_ATMEL_TCLIB=y
|
||||
CONFIG_ATMEL_SSC=y
|
||||
CONFIG_SCSI=y
|
||||
CONFIG_BLK_DEV_SD=y
|
||||
CONFIG_NETDEVICES=y
|
||||
CONFIG_DM9000=y
|
||||
CONFIG_USB_ZD1201=m
|
||||
CONFIG_RTL8187=m
|
||||
CONFIG_LIBERTAS=m
|
||||
CONFIG_LIBERTAS_USB=m
|
||||
CONFIG_LIBERTAS_SDIO=m
|
||||
CONFIG_LIBERTAS_SPI=m
|
||||
CONFIG_RT2X00=m
|
||||
CONFIG_RT2500USB=m
|
||||
CONFIG_RT73USB=m
|
||||
CONFIG_ZD1211RW=m
|
||||
CONFIG_INPUT_POLLDEV=m
|
||||
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
|
||||
CONFIG_INPUT_MOUSEDEV_SCREEN_X=240
|
||||
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=320
|
||||
CONFIG_INPUT_EVDEV=y
|
||||
# CONFIG_KEYBOARD_ATKBD is not set
|
||||
CONFIG_KEYBOARD_GPIO=y
|
||||
# CONFIG_INPUT_MOUSE is not set
|
||||
CONFIG_INPUT_TOUCHSCREEN=y
|
||||
CONFIG_TOUCHSCREEN_ADS7846=y
|
||||
CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
|
||||
CONFIG_SERIAL_ATMEL=y
|
||||
CONFIG_SERIAL_ATMEL_CONSOLE=y
|
||||
CONFIG_HW_RANDOM=y
|
||||
CONFIG_I2C=y
|
||||
CONFIG_I2C_CHARDEV=y
|
||||
CONFIG_I2C_GPIO=y
|
||||
CONFIG_SPI=y
|
||||
CONFIG_SPI_ATMEL=y
|
||||
CONFIG_POWER_SUPPLY=y
|
||||
CONFIG_POWER_RESET=y
|
||||
# CONFIG_HWMON is not set
|
||||
CONFIG_WATCHDOG=y
|
||||
CONFIG_WATCHDOG_NOWAYOUT=y
|
||||
CONFIG_AT91SAM9X_WATCHDOG=y
|
||||
CONFIG_FB=y
|
||||
CONFIG_FB_ATMEL=y
|
||||
CONFIG_BACKLIGHT_LCD_SUPPORT=y
|
||||
# CONFIG_LCD_CLASS_DEVICE is not set
|
||||
CONFIG_BACKLIGHT_CLASS_DEVICE=y
|
||||
CONFIG_BACKLIGHT_ATMEL_LCDC=y
|
||||
# CONFIG_BACKLIGHT_GENERIC is not set
|
||||
CONFIG_FRAMEBUFFER_CONSOLE=y
|
||||
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
|
||||
CONFIG_LOGO=y
|
||||
CONFIG_SOUND=y
|
||||
CONFIG_SND=y
|
||||
CONFIG_SND_SEQUENCER=y
|
||||
CONFIG_SND_MIXER_OSS=y
|
||||
CONFIG_SND_PCM_OSS=y
|
||||
# CONFIG_SND_SUPPORT_OLD_API is not set
|
||||
# CONFIG_SND_VERBOSE_PROCFS is not set
|
||||
# CONFIG_SND_DRIVERS is not set
|
||||
# CONFIG_SND_ARM is not set
|
||||
CONFIG_SND_AT73C213=y
|
||||
CONFIG_SND_USB_AUDIO=m
|
||||
# CONFIG_USB_HID is not set
|
||||
CONFIG_USB=y
|
||||
CONFIG_USB_OHCI_HCD=y
|
||||
CONFIG_USB_STORAGE=y
|
||||
CONFIG_USB_GADGET=y
|
||||
CONFIG_USB_AT91=y
|
||||
CONFIG_USB_G_SERIAL=y
|
||||
CONFIG_MMC=y
|
||||
CONFIG_MMC_ATMELMCI=m
|
||||
CONFIG_NEW_LEDS=y
|
||||
CONFIG_LEDS_CLASS=y
|
||||
CONFIG_LEDS_GPIO=y
|
||||
CONFIG_LEDS_TRIGGERS=y
|
||||
CONFIG_LEDS_TRIGGER_TIMER=y
|
||||
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
|
||||
CONFIG_LEDS_TRIGGER_GPIO=y
|
||||
CONFIG_RTC_CLASS=y
|
||||
CONFIG_RTC_DRV_AT91SAM9=y
|
||||
CONFIG_MSDOS_FS=y
|
||||
CONFIG_VFAT_FS=y
|
||||
CONFIG_TMPFS=y
|
||||
CONFIG_UBIFS_FS=y
|
||||
CONFIG_UBIFS_FS_ADVANCED_COMPR=y
|
||||
CONFIG_SQUASHFS=y
|
||||
CONFIG_SQUASHFS_LZO=y
|
||||
CONFIG_SQUASHFS_XZ=y
|
||||
CONFIG_NFS_FS=y
|
||||
CONFIG_ROOT_NFS=y
|
||||
CONFIG_NLS_CODEPAGE_437=y
|
||||
CONFIG_NLS_CODEPAGE_850=y
|
||||
CONFIG_NLS_ISO8859_1=y
|
||||
CONFIG_NLS_ISO8859_15=y
|
||||
CONFIG_NLS_UTF8=y
|
||||
CONFIG_CRC_CCITT=m
|
||||
|
|
@ -15,18 +15,8 @@ config ARCH_AT91RM9200
|
|||
select AT91_USE_OLD_CLK
|
||||
select OLD_IRQ_AT91
|
||||
|
||||
config ARCH_AT91SAM9261
|
||||
bool "AT91SAM9261 or AT91SAM9G10"
|
||||
select SOC_AT91SAM9261
|
||||
select AT91_USE_OLD_CLK
|
||||
select OLD_IRQ_AT91
|
||||
|
||||
endchoice
|
||||
|
||||
config ARCH_AT91SAM9G10
|
||||
bool
|
||||
select ARCH_AT91SAM9261
|
||||
|
||||
# ----------------------------------------------------------
|
||||
|
||||
if ARCH_AT91RM9200
|
||||
|
|
@ -113,30 +103,6 @@ endif
|
|||
|
||||
# ----------------------------------------------------------
|
||||
|
||||
if ARCH_AT91SAM9261
|
||||
|
||||
comment "AT91SAM9261 Board Type"
|
||||
|
||||
config MACH_AT91SAM9261EK
|
||||
bool "Atmel AT91SAM9261-EK Evaluation Kit"
|
||||
select HAVE_AT91_DATAFLASH_CARD
|
||||
help
|
||||
Select this if you are using Atmel's AT91SAM9261-EK Evaluation Kit.
|
||||
<http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3820>
|
||||
|
||||
comment "AT91SAM9G10 Board Type"
|
||||
|
||||
config MACH_AT91SAM9G10EK
|
||||
bool "Atmel AT91SAM9G10-EK Evaluation Kit"
|
||||
select HAVE_AT91_DATAFLASH_CARD
|
||||
help
|
||||
Select this if you are using Atmel's AT91SAM9G10-EK Evaluation Kit.
|
||||
<http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4588>
|
||||
|
||||
endif
|
||||
|
||||
# ----------------------------------------------------------
|
||||
|
||||
comment "AT91 Board Options"
|
||||
|
||||
config MTD_AT91_DATAFLASH_CARD
|
||||
|
|
|
|||
|
|
@ -21,7 +21,6 @@ obj-$(CONFIG_SOC_SAMA5D3) += sama5d3.o
|
|||
obj-$(CONFIG_SOC_SAMA5D4) += sama5d4.o
|
||||
|
||||
obj-$(CONFIG_ARCH_AT91RM9200) += at91rm9200_devices.o
|
||||
obj-$(CONFIG_ARCH_AT91SAM9261) += at91sam9261_devices.o
|
||||
|
||||
# AT91RM9200 board-specific support
|
||||
obj-$(CONFIG_MACH_ONEARM) += board-1arm.o
|
||||
|
|
@ -38,10 +37,6 @@ obj-$(CONFIG_MACH_YL9200) += board-yl-9200.o
|
|||
obj-$(CONFIG_MACH_CPUAT91) += board-cpuat91.o
|
||||
obj-$(CONFIG_MACH_ECO920) += board-eco920.o
|
||||
|
||||
# AT91SAM9261 board-specific support
|
||||
obj-$(CONFIG_MACH_AT91SAM9261EK) += board-sam9261ek.o
|
||||
obj-$(CONFIG_MACH_AT91SAM9G10EK) += board-sam9261ek.o
|
||||
|
||||
# AT91SAM board with device-tree
|
||||
obj-$(CONFIG_MACH_AT91RM9200_DT) += board-dt-rm9200.o
|
||||
obj-$(CONFIG_MACH_AT91SAM9_DT) += board-dt-sam9.o
|
||||
|
|
|
|||
|
|
@ -10,282 +10,12 @@
|
|||
*
|
||||
*/
|
||||
|
||||
#include <linux/module.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/clk/at91_pmc.h>
|
||||
|
||||
#include <asm/proc-fns.h>
|
||||
#include <asm/irq.h>
|
||||
#include <asm/mach/arch.h>
|
||||
#include <asm/mach/map.h>
|
||||
#include <asm/system_misc.h>
|
||||
#include <mach/cpu.h>
|
||||
#include <mach/at91sam9261.h>
|
||||
#include <mach/hardware.h>
|
||||
|
||||
#include "at91_aic.h"
|
||||
#include "soc.h"
|
||||
#include "generic.h"
|
||||
#include "sam9_smc.h"
|
||||
#include "pm.h"
|
||||
|
||||
#if defined(CONFIG_OLD_CLK_AT91)
|
||||
#include "clock.h"
|
||||
|
||||
/* --------------------------------------------------------------------
|
||||
* Clocks
|
||||
* -------------------------------------------------------------------- */
|
||||
|
||||
/*
|
||||
* The peripheral clocks.
|
||||
*/
|
||||
static struct clk pioA_clk = {
|
||||
.name = "pioA_clk",
|
||||
.pmc_mask = 1 << AT91SAM9261_ID_PIOA,
|
||||
.type = CLK_TYPE_PERIPHERAL,
|
||||
};
|
||||
static struct clk pioB_clk = {
|
||||
.name = "pioB_clk",
|
||||
.pmc_mask = 1 << AT91SAM9261_ID_PIOB,
|
||||
.type = CLK_TYPE_PERIPHERAL,
|
||||
};
|
||||
static struct clk pioC_clk = {
|
||||
.name = "pioC_clk",
|
||||
.pmc_mask = 1 << AT91SAM9261_ID_PIOC,
|
||||
.type = CLK_TYPE_PERIPHERAL,
|
||||
};
|
||||
static struct clk usart0_clk = {
|
||||
.name = "usart0_clk",
|
||||
.pmc_mask = 1 << AT91SAM9261_ID_US0,
|
||||
.type = CLK_TYPE_PERIPHERAL,
|
||||
};
|
||||
static struct clk usart1_clk = {
|
||||
.name = "usart1_clk",
|
||||
.pmc_mask = 1 << AT91SAM9261_ID_US1,
|
||||
.type = CLK_TYPE_PERIPHERAL,
|
||||
};
|
||||
static struct clk usart2_clk = {
|
||||
.name = "usart2_clk",
|
||||
.pmc_mask = 1 << AT91SAM9261_ID_US2,
|
||||
.type = CLK_TYPE_PERIPHERAL,
|
||||
};
|
||||
static struct clk mmc_clk = {
|
||||
.name = "mci_clk",
|
||||
.pmc_mask = 1 << AT91SAM9261_ID_MCI,
|
||||
.type = CLK_TYPE_PERIPHERAL,
|
||||
};
|
||||
static struct clk udc_clk = {
|
||||
.name = "udc_clk",
|
||||
.pmc_mask = 1 << AT91SAM9261_ID_UDP,
|
||||
.type = CLK_TYPE_PERIPHERAL,
|
||||
};
|
||||
static struct clk twi_clk = {
|
||||
.name = "twi_clk",
|
||||
.pmc_mask = 1 << AT91SAM9261_ID_TWI,
|
||||
.type = CLK_TYPE_PERIPHERAL,
|
||||
};
|
||||
static struct clk spi0_clk = {
|
||||
.name = "spi0_clk",
|
||||
.pmc_mask = 1 << AT91SAM9261_ID_SPI0,
|
||||
.type = CLK_TYPE_PERIPHERAL,
|
||||
};
|
||||
static struct clk spi1_clk = {
|
||||
.name = "spi1_clk",
|
||||
.pmc_mask = 1 << AT91SAM9261_ID_SPI1,
|
||||
.type = CLK_TYPE_PERIPHERAL,
|
||||
};
|
||||
static struct clk ssc0_clk = {
|
||||
.name = "ssc0_clk",
|
||||
.pmc_mask = 1 << AT91SAM9261_ID_SSC0,
|
||||
.type = CLK_TYPE_PERIPHERAL,
|
||||
};
|
||||
static struct clk ssc1_clk = {
|
||||
.name = "ssc1_clk",
|
||||
.pmc_mask = 1 << AT91SAM9261_ID_SSC1,
|
||||
.type = CLK_TYPE_PERIPHERAL,
|
||||
};
|
||||
static struct clk ssc2_clk = {
|
||||
.name = "ssc2_clk",
|
||||
.pmc_mask = 1 << AT91SAM9261_ID_SSC2,
|
||||
.type = CLK_TYPE_PERIPHERAL,
|
||||
};
|
||||
static struct clk tc0_clk = {
|
||||
.name = "tc0_clk",
|
||||
.pmc_mask = 1 << AT91SAM9261_ID_TC0,
|
||||
.type = CLK_TYPE_PERIPHERAL,
|
||||
};
|
||||
static struct clk tc1_clk = {
|
||||
.name = "tc1_clk",
|
||||
.pmc_mask = 1 << AT91SAM9261_ID_TC1,
|
||||
.type = CLK_TYPE_PERIPHERAL,
|
||||
};
|
||||
static struct clk tc2_clk = {
|
||||
.name = "tc2_clk",
|
||||
.pmc_mask = 1 << AT91SAM9261_ID_TC2,
|
||||
.type = CLK_TYPE_PERIPHERAL,
|
||||
};
|
||||
static struct clk ohci_clk = {
|
||||
.name = "ohci_clk",
|
||||
.pmc_mask = 1 << AT91SAM9261_ID_UHP,
|
||||
.type = CLK_TYPE_PERIPHERAL,
|
||||
};
|
||||
static struct clk lcdc_clk = {
|
||||
.name = "lcdc_clk",
|
||||
.pmc_mask = 1 << AT91SAM9261_ID_LCDC,
|
||||
.type = CLK_TYPE_PERIPHERAL,
|
||||
};
|
||||
|
||||
/* HClocks */
|
||||
static struct clk hck0 = {
|
||||
.name = "hck0",
|
||||
.pmc_mask = AT91_PMC_HCK0,
|
||||
.type = CLK_TYPE_SYSTEM,
|
||||
.id = 0,
|
||||
};
|
||||
static struct clk hck1 = {
|
||||
.name = "hck1",
|
||||
.pmc_mask = AT91_PMC_HCK1,
|
||||
.type = CLK_TYPE_SYSTEM,
|
||||
.id = 1,
|
||||
};
|
||||
|
||||
static struct clk *periph_clocks[] __initdata = {
|
||||
&pioA_clk,
|
||||
&pioB_clk,
|
||||
&pioC_clk,
|
||||
&usart0_clk,
|
||||
&usart1_clk,
|
||||
&usart2_clk,
|
||||
&mmc_clk,
|
||||
&udc_clk,
|
||||
&twi_clk,
|
||||
&spi0_clk,
|
||||
&spi1_clk,
|
||||
&ssc0_clk,
|
||||
&ssc1_clk,
|
||||
&ssc2_clk,
|
||||
&tc0_clk,
|
||||
&tc1_clk,
|
||||
&tc2_clk,
|
||||
&ohci_clk,
|
||||
&lcdc_clk,
|
||||
// irq0 .. irq2
|
||||
};
|
||||
|
||||
static struct clk_lookup periph_clocks_lookups[] = {
|
||||
CLKDEV_CON_DEV_ID("hclk", "at91sam9261-lcdfb.0", &hck1),
|
||||
CLKDEV_CON_DEV_ID("hclk", "at91sam9g10-lcdfb.0", &hck1),
|
||||
CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk),
|
||||
CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk),
|
||||
CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tc0_clk),
|
||||
CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.0", &tc1_clk),
|
||||
CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.0", &tc2_clk),
|
||||
CLKDEV_CON_DEV_ID("pclk", "at91rm9200_ssc.0", &ssc0_clk),
|
||||
CLKDEV_CON_DEV_ID("pclk", "at91rm9200_ssc.1", &ssc1_clk),
|
||||
CLKDEV_CON_DEV_ID("pclk", "at91rm9200_ssc.2", &ssc2_clk),
|
||||
CLKDEV_CON_DEV_ID("pclk", "fffbc000.ssc", &ssc0_clk),
|
||||
CLKDEV_CON_DEV_ID("pclk", "fffc0000.ssc", &ssc1_clk),
|
||||
CLKDEV_CON_DEV_ID("pclk", "fffc4000.ssc", &ssc2_clk),
|
||||
CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &hck0),
|
||||
CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9261.0", &twi_clk),
|
||||
CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9g10.0", &twi_clk),
|
||||
CLKDEV_CON_ID("pioA", &pioA_clk),
|
||||
CLKDEV_CON_ID("pioB", &pioB_clk),
|
||||
CLKDEV_CON_ID("pioC", &pioC_clk),
|
||||
/* more lookup table for DT entries */
|
||||
CLKDEV_CON_DEV_ID("usart", "fffff200.serial", &mck),
|
||||
CLKDEV_CON_DEV_ID("usart", "fffb0000.serial", &usart0_clk),
|
||||
CLKDEV_CON_DEV_ID("usart", "ffffb400.serial", &usart1_clk),
|
||||
CLKDEV_CON_DEV_ID("usart", "fff94000.serial", &usart2_clk),
|
||||
CLKDEV_CON_DEV_ID("t0_clk", "fffa0000.timer", &tc0_clk),
|
||||
CLKDEV_CON_DEV_ID("t1_clk", "fffa0000.timer", &tc1_clk),
|
||||
CLKDEV_CON_DEV_ID("t2_clk", "fffa0000.timer", &tc2_clk),
|
||||
CLKDEV_CON_DEV_ID("hclk", "500000.ohci", &hck0),
|
||||
CLKDEV_CON_DEV_ID("hclk", "600000.fb", &hck1),
|
||||
CLKDEV_CON_DEV_ID("spi_clk", "fffc8000.spi", &spi0_clk),
|
||||
CLKDEV_CON_DEV_ID("spi_clk", "fffcc000.spi", &spi1_clk),
|
||||
CLKDEV_CON_DEV_ID("mci_clk", "fffa8000.mmc", &mmc_clk),
|
||||
CLKDEV_CON_DEV_ID(NULL, "fffac000.i2c", &twi_clk),
|
||||
CLKDEV_CON_DEV_ID(NULL, "fffff400.gpio", &pioA_clk),
|
||||
CLKDEV_CON_DEV_ID(NULL, "fffff600.gpio", &pioB_clk),
|
||||
CLKDEV_CON_DEV_ID(NULL, "fffff800.gpio", &pioC_clk),
|
||||
};
|
||||
|
||||
static struct clk_lookup usart_clocks_lookups[] = {
|
||||
CLKDEV_CON_DEV_ID("usart", "atmel_usart.0", &mck),
|
||||
CLKDEV_CON_DEV_ID("usart", "atmel_usart.1", &usart0_clk),
|
||||
CLKDEV_CON_DEV_ID("usart", "atmel_usart.2", &usart1_clk),
|
||||
CLKDEV_CON_DEV_ID("usart", "atmel_usart.3", &usart2_clk),
|
||||
};
|
||||
|
||||
/*
|
||||
* The four programmable clocks.
|
||||
* You must configure pin multiplexing to bring these signals out.
|
||||
*/
|
||||
static struct clk pck0 = {
|
||||
.name = "pck0",
|
||||
.pmc_mask = AT91_PMC_PCK0,
|
||||
.type = CLK_TYPE_PROGRAMMABLE,
|
||||
.id = 0,
|
||||
};
|
||||
static struct clk pck1 = {
|
||||
.name = "pck1",
|
||||
.pmc_mask = AT91_PMC_PCK1,
|
||||
.type = CLK_TYPE_PROGRAMMABLE,
|
||||
.id = 1,
|
||||
};
|
||||
static struct clk pck2 = {
|
||||
.name = "pck2",
|
||||
.pmc_mask = AT91_PMC_PCK2,
|
||||
.type = CLK_TYPE_PROGRAMMABLE,
|
||||
.id = 2,
|
||||
};
|
||||
static struct clk pck3 = {
|
||||
.name = "pck3",
|
||||
.pmc_mask = AT91_PMC_PCK3,
|
||||
.type = CLK_TYPE_PROGRAMMABLE,
|
||||
.id = 3,
|
||||
};
|
||||
|
||||
static void __init at91sam9261_register_clocks(void)
|
||||
{
|
||||
int i;
|
||||
|
||||
for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
|
||||
clk_register(periph_clocks[i]);
|
||||
|
||||
clkdev_add_table(periph_clocks_lookups,
|
||||
ARRAY_SIZE(periph_clocks_lookups));
|
||||
clkdev_add_table(usart_clocks_lookups,
|
||||
ARRAY_SIZE(usart_clocks_lookups));
|
||||
|
||||
clk_register(&pck0);
|
||||
clk_register(&pck1);
|
||||
clk_register(&pck2);
|
||||
clk_register(&pck3);
|
||||
|
||||
clk_register(&hck0);
|
||||
clk_register(&hck1);
|
||||
}
|
||||
#else
|
||||
#define at91sam9261_register_clocks NULL
|
||||
#endif
|
||||
/* --------------------------------------------------------------------
|
||||
* GPIO
|
||||
* -------------------------------------------------------------------- */
|
||||
|
||||
static struct at91_gpio_bank at91sam9261_gpio[] __initdata = {
|
||||
{
|
||||
.id = AT91SAM9261_ID_PIOA,
|
||||
.regbase = AT91SAM9261_BASE_PIOA,
|
||||
}, {
|
||||
.id = AT91SAM9261_ID_PIOB,
|
||||
.regbase = AT91SAM9261_BASE_PIOB,
|
||||
}, {
|
||||
.id = AT91SAM9261_ID_PIOC,
|
||||
.regbase = AT91SAM9261_BASE_PIOC,
|
||||
}
|
||||
};
|
||||
|
||||
/* --------------------------------------------------------------------
|
||||
* AT91SAM9261 processor initialization
|
||||
|
|
@ -299,119 +29,14 @@ static void __init at91sam9261_map_io(void)
|
|||
at91_init_sram(0, AT91SAM9261_SRAM_BASE, AT91SAM9261_SRAM_SIZE);
|
||||
}
|
||||
|
||||
static void __init at91sam9261_ioremap_registers(void)
|
||||
{
|
||||
at91_ioremap_ramc(0, AT91SAM9261_BASE_SDRAMC, 512);
|
||||
at91sam926x_ioremap_pit(AT91SAM9261_BASE_PIT);
|
||||
at91sam9_ioremap_smc(0, AT91SAM9261_BASE_SMC);
|
||||
at91_ioremap_matrix(AT91SAM9261_BASE_MATRIX);
|
||||
at91_pm_set_standby(at91sam9_sdram_standby);
|
||||
}
|
||||
|
||||
static void __init at91sam9261_initialize(void)
|
||||
{
|
||||
arm_pm_idle = at91sam9_idle;
|
||||
|
||||
at91_sysirq_mask_rtt(AT91SAM9261_BASE_RTT);
|
||||
|
||||
/* Register GPIO subsystem */
|
||||
at91_gpio_init(at91sam9261_gpio, 3);
|
||||
}
|
||||
|
||||
static struct resource rstc_resources[] = {
|
||||
[0] = {
|
||||
.start = AT91SAM9261_BASE_RSTC,
|
||||
.end = AT91SAM9261_BASE_RSTC + SZ_16 - 1,
|
||||
.flags = IORESOURCE_MEM,
|
||||
},
|
||||
[1] = {
|
||||
.start = AT91SAM9261_BASE_SDRAMC,
|
||||
.end = AT91SAM9261_BASE_SDRAMC + SZ_512 - 1,
|
||||
.flags = IORESOURCE_MEM,
|
||||
},
|
||||
};
|
||||
|
||||
static struct platform_device rstc_device = {
|
||||
.name = "at91-sam9260-reset",
|
||||
.resource = rstc_resources,
|
||||
.num_resources = ARRAY_SIZE(rstc_resources),
|
||||
};
|
||||
|
||||
static struct resource shdwc_resources[] = {
|
||||
[0] = {
|
||||
.start = AT91SAM9261_BASE_SHDWC,
|
||||
.end = AT91SAM9261_BASE_SHDWC + SZ_16 - 1,
|
||||
.flags = IORESOURCE_MEM,
|
||||
},
|
||||
};
|
||||
|
||||
static struct platform_device shdwc_device = {
|
||||
.name = "at91-poweroff",
|
||||
.resource = shdwc_resources,
|
||||
.num_resources = ARRAY_SIZE(shdwc_resources),
|
||||
};
|
||||
|
||||
static void __init at91sam9261_register_devices(void)
|
||||
{
|
||||
platform_device_register(&rstc_device);
|
||||
platform_device_register(&shdwc_device);
|
||||
}
|
||||
|
||||
/* --------------------------------------------------------------------
|
||||
* Interrupt initialization
|
||||
* -------------------------------------------------------------------- */
|
||||
|
||||
/*
|
||||
* The default interrupt priority levels (0 = lowest, 7 = highest).
|
||||
*/
|
||||
static unsigned int at91sam9261_default_irq_priority[NR_AIC_IRQS] __initdata = {
|
||||
7, /* Advanced Interrupt Controller */
|
||||
7, /* System Peripherals */
|
||||
1, /* Parallel IO Controller A */
|
||||
1, /* Parallel IO Controller B */
|
||||
1, /* Parallel IO Controller C */
|
||||
0,
|
||||
5, /* USART 0 */
|
||||
5, /* USART 1 */
|
||||
5, /* USART 2 */
|
||||
0, /* Multimedia Card Interface */
|
||||
2, /* USB Device Port */
|
||||
6, /* Two-Wire Interface */
|
||||
5, /* Serial Peripheral Interface 0 */
|
||||
5, /* Serial Peripheral Interface 1 */
|
||||
4, /* Serial Synchronous Controller 0 */
|
||||
4, /* Serial Synchronous Controller 1 */
|
||||
4, /* Serial Synchronous Controller 2 */
|
||||
0, /* Timer Counter 0 */
|
||||
0, /* Timer Counter 1 */
|
||||
0, /* Timer Counter 2 */
|
||||
2, /* USB Host port */
|
||||
3, /* LCD Controller */
|
||||
0,
|
||||
0,
|
||||
0,
|
||||
0,
|
||||
0,
|
||||
0,
|
||||
0,
|
||||
0, /* Advanced Interrupt Controller */
|
||||
0, /* Advanced Interrupt Controller */
|
||||
0, /* Advanced Interrupt Controller */
|
||||
};
|
||||
|
||||
static void __init at91sam9261_init_time(void)
|
||||
{
|
||||
at91sam926x_pit_init(NR_IRQS_LEGACY + AT91_ID_SYS);
|
||||
}
|
||||
|
||||
AT91_SOC_START(at91sam9261)
|
||||
.map_io = at91sam9261_map_io,
|
||||
.default_irq_priority = at91sam9261_default_irq_priority,
|
||||
.extern_irq = (1 << AT91SAM9261_ID_IRQ0) | (1 << AT91SAM9261_ID_IRQ1)
|
||||
| (1 << AT91SAM9261_ID_IRQ2),
|
||||
.ioremap_registers = at91sam9261_ioremap_registers,
|
||||
.register_clocks = at91sam9261_register_clocks,
|
||||
.register_devices = at91sam9261_register_devices,
|
||||
.init = at91sam9261_initialize,
|
||||
.init_time = at91sam9261_init_time,
|
||||
AT91_SOC_END
|
||||
|
|
|
|||
File diff suppressed because it is too large
Load Diff
|
|
@ -1,623 +0,0 @@
|
|||
/*
|
||||
* linux/arch/arm/mach-at91/board-sam9261ek.c
|
||||
*
|
||||
* Copyright (C) 2005 SAN People
|
||||
* Copyright (C) 2006 Atmel
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
||||
*/
|
||||
|
||||
#include <linux/types.h>
|
||||
#include <linux/gpio.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/mm.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/spi/spi.h>
|
||||
#include <linux/spi/ads7846.h>
|
||||
#include <linux/spi/at73c213.h>
|
||||
#include <linux/clk.h>
|
||||
#include <linux/dm9000.h>
|
||||
#include <linux/fb.h>
|
||||
#include <linux/gpio_keys.h>
|
||||
#include <linux/input.h>
|
||||
|
||||
#include <video/atmel_lcdc.h>
|
||||
|
||||
#include <asm/setup.h>
|
||||
#include <asm/mach-types.h>
|
||||
#include <asm/irq.h>
|
||||
|
||||
#include <asm/mach/arch.h>
|
||||
#include <asm/mach/map.h>
|
||||
#include <asm/mach/irq.h>
|
||||
|
||||
#include <mach/hardware.h>
|
||||
#include <mach/at91sam9_smc.h>
|
||||
#include <mach/system_rev.h>
|
||||
|
||||
#include "at91_aic.h"
|
||||
#include "board.h"
|
||||
#include "sam9_smc.h"
|
||||
#include "generic.h"
|
||||
#include "gpio.h"
|
||||
|
||||
|
||||
static void __init ek_init_early(void)
|
||||
{
|
||||
/* Initialize processor: 18.432 MHz crystal */
|
||||
at91_initialize(18432000);
|
||||
}
|
||||
|
||||
/*
|
||||
* DM9000 ethernet device
|
||||
*/
|
||||
#if defined(CONFIG_DM9000)
|
||||
static struct resource dm9000_resource[] = {
|
||||
[0] = {
|
||||
.start = AT91_CHIPSELECT_2,
|
||||
.end = AT91_CHIPSELECT_2 + 3,
|
||||
.flags = IORESOURCE_MEM
|
||||
},
|
||||
[1] = {
|
||||
.start = AT91_CHIPSELECT_2 + 0x44,
|
||||
.end = AT91_CHIPSELECT_2 + 0xFF,
|
||||
.flags = IORESOURCE_MEM
|
||||
},
|
||||
[2] = {
|
||||
.flags = IORESOURCE_IRQ
|
||||
| IORESOURCE_IRQ_LOWEDGE | IORESOURCE_IRQ_HIGHEDGE,
|
||||
}
|
||||
};
|
||||
|
||||
static struct dm9000_plat_data dm9000_platdata = {
|
||||
.flags = DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM,
|
||||
};
|
||||
|
||||
static struct platform_device dm9000_device = {
|
||||
.name = "dm9000",
|
||||
.id = 0,
|
||||
.num_resources = ARRAY_SIZE(dm9000_resource),
|
||||
.resource = dm9000_resource,
|
||||
.dev = {
|
||||
.platform_data = &dm9000_platdata,
|
||||
}
|
||||
};
|
||||
|
||||
/*
|
||||
* SMC timings for the DM9000.
|
||||
* Note: These timings were calculated for MASTER_CLOCK = 100000000 according to the DM9000 timings.
|
||||
*/
|
||||
static struct sam9_smc_config __initdata dm9000_smc_config = {
|
||||
.ncs_read_setup = 0,
|
||||
.nrd_setup = 2,
|
||||
.ncs_write_setup = 0,
|
||||
.nwe_setup = 2,
|
||||
|
||||
.ncs_read_pulse = 8,
|
||||
.nrd_pulse = 4,
|
||||
.ncs_write_pulse = 8,
|
||||
.nwe_pulse = 4,
|
||||
|
||||
.read_cycle = 16,
|
||||
.write_cycle = 16,
|
||||
|
||||
.mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_BAT_WRITE | AT91_SMC_DBW_16,
|
||||
.tdf_cycles = 1,
|
||||
};
|
||||
|
||||
static void __init ek_add_device_dm9000(void)
|
||||
{
|
||||
struct resource *r = &dm9000_resource[2];
|
||||
|
||||
/* Configure chip-select 2 (DM9000) */
|
||||
sam9_smc_configure(0, 2, &dm9000_smc_config);
|
||||
|
||||
/* Configure Reset signal as output */
|
||||
at91_set_gpio_output(AT91_PIN_PC10, 0);
|
||||
|
||||
/* Configure Interrupt pin as input, no pull-up */
|
||||
at91_set_gpio_input(AT91_PIN_PC11, 0);
|
||||
|
||||
r->start = r->end = gpio_to_irq(AT91_PIN_PC11);
|
||||
platform_device_register(&dm9000_device);
|
||||
}
|
||||
#else
|
||||
static void __init ek_add_device_dm9000(void) {}
|
||||
#endif /* CONFIG_DM9000 */
|
||||
|
||||
|
||||
/*
|
||||
* USB Host Port
|
||||
*/
|
||||
static struct at91_usbh_data __initdata ek_usbh_data = {
|
||||
.ports = 2,
|
||||
.vbus_pin = {-EINVAL, -EINVAL},
|
||||
.overcurrent_pin= {-EINVAL, -EINVAL},
|
||||
};
|
||||
|
||||
|
||||
/*
|
||||
* USB Device Port
|
||||
*/
|
||||
static struct at91_udc_data __initdata ek_udc_data = {
|
||||
.vbus_pin = AT91_PIN_PB29,
|
||||
.pullup_pin = -EINVAL, /* pull-up driven by UDC */
|
||||
};
|
||||
|
||||
|
||||
/*
|
||||
* NAND flash
|
||||
*/
|
||||
static struct mtd_partition __initdata ek_nand_partition[] = {
|
||||
{
|
||||
.name = "Partition 1",
|
||||
.offset = 0,
|
||||
.size = SZ_256K,
|
||||
},
|
||||
{
|
||||
.name = "Partition 2",
|
||||
.offset = MTDPART_OFS_NXTBLK,
|
||||
.size = MTDPART_SIZ_FULL,
|
||||
},
|
||||
};
|
||||
|
||||
static struct atmel_nand_data __initdata ek_nand_data = {
|
||||
.ale = 22,
|
||||
.cle = 21,
|
||||
.det_pin = -EINVAL,
|
||||
.rdy_pin = AT91_PIN_PC15,
|
||||
.enable_pin = AT91_PIN_PC14,
|
||||
.ecc_mode = NAND_ECC_SOFT,
|
||||
.on_flash_bbt = 1,
|
||||
.parts = ek_nand_partition,
|
||||
.num_parts = ARRAY_SIZE(ek_nand_partition),
|
||||
};
|
||||
|
||||
static struct sam9_smc_config __initdata ek_nand_smc_config = {
|
||||
.ncs_read_setup = 0,
|
||||
.nrd_setup = 1,
|
||||
.ncs_write_setup = 0,
|
||||
.nwe_setup = 1,
|
||||
|
||||
.ncs_read_pulse = 3,
|
||||
.nrd_pulse = 3,
|
||||
.ncs_write_pulse = 3,
|
||||
.nwe_pulse = 3,
|
||||
|
||||
.read_cycle = 5,
|
||||
.write_cycle = 5,
|
||||
|
||||
.mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE,
|
||||
.tdf_cycles = 2,
|
||||
};
|
||||
|
||||
static void __init ek_add_device_nand(void)
|
||||
{
|
||||
ek_nand_data.bus_width_16 = board_have_nand_16bit();
|
||||
/* setup bus-width (8 or 16) */
|
||||
if (ek_nand_data.bus_width_16)
|
||||
ek_nand_smc_config.mode |= AT91_SMC_DBW_16;
|
||||
else
|
||||
ek_nand_smc_config.mode |= AT91_SMC_DBW_8;
|
||||
|
||||
/* configure chip-select 3 (NAND) */
|
||||
sam9_smc_configure(0, 3, &ek_nand_smc_config);
|
||||
|
||||
at91_add_device_nand(&ek_nand_data);
|
||||
}
|
||||
|
||||
/*
|
||||
* SPI related devices
|
||||
*/
|
||||
#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
|
||||
|
||||
/*
|
||||
* ADS7846 Touchscreen
|
||||
*/
|
||||
#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
|
||||
|
||||
static int ads7843_pendown_state(void)
|
||||
{
|
||||
return !at91_get_gpio_value(AT91_PIN_PC2); /* Touchscreen PENIRQ */
|
||||
}
|
||||
|
||||
static struct ads7846_platform_data ads_info = {
|
||||
.model = 7843,
|
||||
.x_min = 150,
|
||||
.x_max = 3830,
|
||||
.y_min = 190,
|
||||
.y_max = 3830,
|
||||
.vref_delay_usecs = 100,
|
||||
.x_plate_ohms = 450,
|
||||
.y_plate_ohms = 250,
|
||||
.pressure_max = 15000,
|
||||
.debounce_max = 1,
|
||||
.debounce_rep = 0,
|
||||
.debounce_tol = (~0),
|
||||
.get_pendown_state = ads7843_pendown_state,
|
||||
};
|
||||
|
||||
static void __init ek_add_device_ts(void)
|
||||
{
|
||||
at91_set_B_periph(AT91_PIN_PC2, 1); /* External IRQ0, with pullup */
|
||||
at91_set_gpio_input(AT91_PIN_PA11, 1); /* Touchscreen BUSY signal */
|
||||
}
|
||||
#else
|
||||
static void __init ek_add_device_ts(void) {}
|
||||
#endif
|
||||
|
||||
/*
|
||||
* Audio
|
||||
*/
|
||||
static struct at73c213_board_info at73c213_data = {
|
||||
.ssc_id = 1,
|
||||
.shortname = "AT91SAM9261/9G10-EK external DAC",
|
||||
};
|
||||
|
||||
#if defined(CONFIG_SND_AT73C213) || defined(CONFIG_SND_AT73C213_MODULE)
|
||||
static void __init at73c213_set_clk(struct at73c213_board_info *info)
|
||||
{
|
||||
struct clk *pck2;
|
||||
struct clk *plla;
|
||||
|
||||
pck2 = clk_get(NULL, "pck2");
|
||||
plla = clk_get(NULL, "plla");
|
||||
|
||||
/* AT73C213 MCK Clock */
|
||||
at91_set_B_periph(AT91_PIN_PB31, 0); /* PCK2 */
|
||||
|
||||
clk_set_parent(pck2, plla);
|
||||
clk_put(plla);
|
||||
|
||||
info->dac_clk = pck2;
|
||||
}
|
||||
#else
|
||||
static void __init at73c213_set_clk(struct at73c213_board_info *info) {}
|
||||
#endif
|
||||
|
||||
/*
|
||||
* SPI devices
|
||||
*/
|
||||
static struct spi_board_info ek_spi_devices[] = {
|
||||
{ /* DataFlash chip */
|
||||
.modalias = "mtd_dataflash",
|
||||
.chip_select = 0,
|
||||
.max_speed_hz = 15 * 1000 * 1000,
|
||||
.bus_num = 0,
|
||||
},
|
||||
#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
|
||||
{
|
||||
.modalias = "ads7846",
|
||||
.chip_select = 2,
|
||||
.max_speed_hz = 125000 * 26, /* (max sample rate @ 3V) * (cmd + data + overhead) */
|
||||
.bus_num = 0,
|
||||
.platform_data = &ads_info,
|
||||
.irq = NR_IRQS_LEGACY + AT91SAM9261_ID_IRQ0,
|
||||
.controller_data = (void *) AT91_PIN_PA28, /* CS pin */
|
||||
},
|
||||
#endif
|
||||
#if defined(CONFIG_MTD_AT91_DATAFLASH_CARD)
|
||||
{ /* DataFlash card - jumper (J12) configurable to CS3 or CS0 */
|
||||
.modalias = "mtd_dataflash",
|
||||
.chip_select = 3,
|
||||
.max_speed_hz = 15 * 1000 * 1000,
|
||||
.bus_num = 0,
|
||||
},
|
||||
#elif defined(CONFIG_SND_AT73C213) || defined(CONFIG_SND_AT73C213_MODULE)
|
||||
{ /* AT73C213 DAC */
|
||||
.modalias = "at73c213",
|
||||
.chip_select = 3,
|
||||
.max_speed_hz = 10 * 1000 * 1000,
|
||||
.bus_num = 0,
|
||||
.mode = SPI_MODE_1,
|
||||
.platform_data = &at73c213_data,
|
||||
.controller_data = (void*) AT91_PIN_PA29, /* default for CS3 is PA6, but it must be PA29 */
|
||||
},
|
||||
#endif
|
||||
};
|
||||
|
||||
#else /* CONFIG_SPI_ATMEL_* */
|
||||
/* spi0 and mmc/sd share the same PIO pins: cannot be used at the same time */
|
||||
|
||||
/*
|
||||
* MCI (SD/MMC)
|
||||
* det_pin, wp_pin and vcc_pin are not connected
|
||||
*/
|
||||
static struct mci_platform_data __initdata mci0_data = {
|
||||
.slot[0] = {
|
||||
.bus_width = 4,
|
||||
.detect_pin = -EINVAL,
|
||||
.wp_pin = -EINVAL,
|
||||
},
|
||||
};
|
||||
|
||||
#endif /* CONFIG_SPI_ATMEL_* */
|
||||
|
||||
|
||||
/*
|
||||
* LCD Controller
|
||||
*/
|
||||
#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
|
||||
|
||||
#if defined(CONFIG_FB_ATMEL_STN)
|
||||
|
||||
/* STN */
|
||||
static struct fb_videomode at91_stn_modes[] = {
|
||||
{
|
||||
.name = "SP06Q002 @ 75",
|
||||
.refresh = 75,
|
||||
.xres = 320, .yres = 240,
|
||||
.pixclock = KHZ2PICOS(1440),
|
||||
|
||||
.left_margin = 1, .right_margin = 1,
|
||||
.upper_margin = 0, .lower_margin = 0,
|
||||
.hsync_len = 1, .vsync_len = 1,
|
||||
|
||||
.sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
|
||||
.vmode = FB_VMODE_NONINTERLACED,
|
||||
},
|
||||
};
|
||||
|
||||
static struct fb_monspecs at91fb_default_stn_monspecs = {
|
||||
.manufacturer = "HIT",
|
||||
.monitor = "SP06Q002",
|
||||
|
||||
.modedb = at91_stn_modes,
|
||||
.modedb_len = ARRAY_SIZE(at91_stn_modes),
|
||||
.hfmin = 15000,
|
||||
.hfmax = 64000,
|
||||
.vfmin = 50,
|
||||
.vfmax = 150,
|
||||
};
|
||||
|
||||
#define AT91SAM9261_DEFAULT_STN_LCDCON2 (ATMEL_LCDC_MEMOR_LITTLE \
|
||||
| ATMEL_LCDC_DISTYPE_STNMONO \
|
||||
| ATMEL_LCDC_CLKMOD_ALWAYSACTIVE \
|
||||
| ATMEL_LCDC_IFWIDTH_4 \
|
||||
| ATMEL_LCDC_SCANMOD_SINGLE)
|
||||
|
||||
static void at91_lcdc_stn_power_control(struct atmel_lcdfb_pdata *pdata, int on)
|
||||
{
|
||||
/* backlight */
|
||||
if (on) { /* power up */
|
||||
at91_set_gpio_value(AT91_PIN_PC14, 0);
|
||||
at91_set_gpio_value(AT91_PIN_PC15, 0);
|
||||
} else { /* power down */
|
||||
at91_set_gpio_value(AT91_PIN_PC14, 1);
|
||||
at91_set_gpio_value(AT91_PIN_PC15, 1);
|
||||
}
|
||||
}
|
||||
|
||||
static struct atmel_lcdfb_pdata __initdata ek_lcdc_data = {
|
||||
.default_bpp = 1,
|
||||
.default_dmacon = ATMEL_LCDC_DMAEN,
|
||||
.default_lcdcon2 = AT91SAM9261_DEFAULT_STN_LCDCON2,
|
||||
.default_monspecs = &at91fb_default_stn_monspecs,
|
||||
.atmel_lcdfb_power_control = at91_lcdc_stn_power_control,
|
||||
.guard_time = 1,
|
||||
};
|
||||
|
||||
#else
|
||||
|
||||
/* TFT */
|
||||
static struct fb_videomode at91_tft_vga_modes[] = {
|
||||
{
|
||||
.name = "TX09D50VM1CCA @ 60",
|
||||
.refresh = 60,
|
||||
.xres = 240, .yres = 320,
|
||||
.pixclock = KHZ2PICOS(4965),
|
||||
|
||||
.left_margin = 1, .right_margin = 33,
|
||||
.upper_margin = 1, .lower_margin = 0,
|
||||
.hsync_len = 5, .vsync_len = 1,
|
||||
|
||||
.sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
|
||||
.vmode = FB_VMODE_NONINTERLACED,
|
||||
},
|
||||
};
|
||||
|
||||
static struct fb_monspecs at91fb_default_tft_monspecs = {
|
||||
.manufacturer = "HIT",
|
||||
.monitor = "TX09D50VM1CCA",
|
||||
|
||||
.modedb = at91_tft_vga_modes,
|
||||
.modedb_len = ARRAY_SIZE(at91_tft_vga_modes),
|
||||
.hfmin = 15000,
|
||||
.hfmax = 64000,
|
||||
.vfmin = 50,
|
||||
.vfmax = 150,
|
||||
};
|
||||
|
||||
#define AT91SAM9261_DEFAULT_TFT_LCDCON2 (ATMEL_LCDC_MEMOR_LITTLE \
|
||||
| ATMEL_LCDC_DISTYPE_TFT \
|
||||
| ATMEL_LCDC_CLKMOD_ALWAYSACTIVE)
|
||||
|
||||
static void at91_lcdc_tft_power_control(struct atmel_lcdfb_pdata *pdata, int on)
|
||||
{
|
||||
if (on)
|
||||
at91_set_gpio_value(AT91_PIN_PA12, 0); /* power up */
|
||||
else
|
||||
at91_set_gpio_value(AT91_PIN_PA12, 1); /* power down */
|
||||
}
|
||||
|
||||
static struct atmel_lcdfb_pdata __initdata ek_lcdc_data = {
|
||||
.lcdcon_is_backlight = true,
|
||||
.default_bpp = 16,
|
||||
.default_dmacon = ATMEL_LCDC_DMAEN,
|
||||
.default_lcdcon2 = AT91SAM9261_DEFAULT_TFT_LCDCON2,
|
||||
.default_monspecs = &at91fb_default_tft_monspecs,
|
||||
.atmel_lcdfb_power_control = at91_lcdc_tft_power_control,
|
||||
.guard_time = 1,
|
||||
};
|
||||
#endif
|
||||
|
||||
#else
|
||||
static struct atmel_lcdfb_pdata __initdata ek_lcdc_data;
|
||||
#endif
|
||||
|
||||
|
||||
/*
|
||||
* GPIO Buttons
|
||||
*/
|
||||
#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
|
||||
static struct gpio_keys_button ek_buttons[] = {
|
||||
{
|
||||
.gpio = AT91_PIN_PA27,
|
||||
.code = BTN_0,
|
||||
.desc = "Button 0",
|
||||
.active_low = 1,
|
||||
.wakeup = 1,
|
||||
},
|
||||
{
|
||||
.gpio = AT91_PIN_PA26,
|
||||
.code = BTN_1,
|
||||
.desc = "Button 1",
|
||||
.active_low = 1,
|
||||
.wakeup = 1,
|
||||
},
|
||||
{
|
||||
.gpio = AT91_PIN_PA25,
|
||||
.code = BTN_2,
|
||||
.desc = "Button 2",
|
||||
.active_low = 1,
|
||||
.wakeup = 1,
|
||||
},
|
||||
{
|
||||
.gpio = AT91_PIN_PA24,
|
||||
.code = BTN_3,
|
||||
.desc = "Button 3",
|
||||
.active_low = 1,
|
||||
.wakeup = 1,
|
||||
}
|
||||
};
|
||||
|
||||
static struct gpio_keys_platform_data ek_button_data = {
|
||||
.buttons = ek_buttons,
|
||||
.nbuttons = ARRAY_SIZE(ek_buttons),
|
||||
};
|
||||
|
||||
static struct platform_device ek_button_device = {
|
||||
.name = "gpio-keys",
|
||||
.id = -1,
|
||||
.num_resources = 0,
|
||||
.dev = {
|
||||
.platform_data = &ek_button_data,
|
||||
}
|
||||
};
|
||||
|
||||
static void __init ek_add_device_buttons(void)
|
||||
{
|
||||
at91_set_gpio_input(AT91_PIN_PA27, 1); /* btn0 */
|
||||
at91_set_deglitch(AT91_PIN_PA27, 1);
|
||||
at91_set_gpio_input(AT91_PIN_PA26, 1); /* btn1 */
|
||||
at91_set_deglitch(AT91_PIN_PA26, 1);
|
||||
at91_set_gpio_input(AT91_PIN_PA25, 1); /* btn2 */
|
||||
at91_set_deglitch(AT91_PIN_PA25, 1);
|
||||
at91_set_gpio_input(AT91_PIN_PA24, 1); /* btn3 */
|
||||
at91_set_deglitch(AT91_PIN_PA24, 1);
|
||||
|
||||
platform_device_register(&ek_button_device);
|
||||
}
|
||||
#else
|
||||
static void __init ek_add_device_buttons(void) {}
|
||||
#endif
|
||||
|
||||
/*
|
||||
* LEDs
|
||||
*/
|
||||
static struct gpio_led ek_leds[] = {
|
||||
{ /* "bottom" led, green, userled1 to be defined */
|
||||
.name = "ds7",
|
||||
.gpio = AT91_PIN_PA14,
|
||||
.active_low = 1,
|
||||
.default_trigger = "none",
|
||||
},
|
||||
{ /* "top" led, green, userled2 to be defined */
|
||||
.name = "ds8",
|
||||
.gpio = AT91_PIN_PA13,
|
||||
.active_low = 1,
|
||||
.default_trigger = "none",
|
||||
},
|
||||
{ /* "power" led, yellow */
|
||||
.name = "ds1",
|
||||
.gpio = AT91_PIN_PA23,
|
||||
.default_trigger = "heartbeat",
|
||||
}
|
||||
};
|
||||
|
||||
static void __init ek_board_init(void)
|
||||
{
|
||||
at91_register_devices();
|
||||
|
||||
/* Serial */
|
||||
/* DBGU on ttyS0. (Rx & Tx only) */
|
||||
at91_register_uart(0, 0, 0);
|
||||
at91_add_device_serial();
|
||||
|
||||
if (cpu_is_at91sam9g10())
|
||||
ek_lcdc_data.lcd_wiring_mode = ATMEL_LCDC_WIRING_RGB;
|
||||
|
||||
/* USB Host */
|
||||
at91_add_device_usbh(&ek_usbh_data);
|
||||
/* USB Device */
|
||||
at91_add_device_udc(&ek_udc_data);
|
||||
/* I2C */
|
||||
at91_add_device_i2c(NULL, 0);
|
||||
/* NAND */
|
||||
ek_add_device_nand();
|
||||
/* DM9000 ethernet */
|
||||
ek_add_device_dm9000();
|
||||
|
||||
/* spi0 and mmc/sd share the same PIO pins */
|
||||
#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
|
||||
/* SPI */
|
||||
at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
|
||||
/* Touchscreen */
|
||||
ek_add_device_ts();
|
||||
/* SSC (to AT73C213) */
|
||||
at73c213_set_clk(&at73c213_data);
|
||||
at91_add_device_ssc(AT91SAM9261_ID_SSC1, ATMEL_SSC_TX);
|
||||
#else
|
||||
/* MMC */
|
||||
at91_add_device_mci(0, &mci0_data);
|
||||
#endif
|
||||
/* LCD Controller */
|
||||
at91_add_device_lcdc(&ek_lcdc_data);
|
||||
/* Push Buttons */
|
||||
ek_add_device_buttons();
|
||||
/* LEDs */
|
||||
at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
|
||||
}
|
||||
|
||||
MACHINE_START(AT91SAM9261EK, "Atmel AT91SAM9261-EK")
|
||||
/* Maintainer: Atmel */
|
||||
.init_time = at91_init_time,
|
||||
.map_io = at91_map_io,
|
||||
.handle_irq = at91_aic_handle_irq,
|
||||
.init_early = ek_init_early,
|
||||
.init_irq = at91_init_irq_default,
|
||||
.init_machine = ek_board_init,
|
||||
MACHINE_END
|
||||
|
||||
MACHINE_START(AT91SAM9G10EK, "Atmel AT91SAM9G10-EK")
|
||||
/* Maintainer: Atmel */
|
||||
.init_time = at91_init_time,
|
||||
.map_io = at91_map_io,
|
||||
.handle_irq = at91_aic_handle_irq,
|
||||
.init_early = ek_init_early,
|
||||
.init_irq = at91_init_irq_default,
|
||||
.init_machine = ek_board_init,
|
||||
MACHINE_END
|
||||
Loading…
Reference in New Issue