dsa: add support for the Marvell 88E6060 switch chip
Add support for the Marvell 88E6060 switch chip. This chip only supports the Header and Trailer tagging formats, and we use it in Trailer mode since that mode is slightly easier to handle than Header mode. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Tested-by: Byron Bradley <byron.bbradley@gmail.com> Tested-by: Tim Ellis <tim.ellis@mac.com> Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Lennert Buytenhek
David S. Miller
parent
396138f03f
commit
2e16a77e1e
|
|
@ -28,6 +28,13 @@ config NET_DSA_MV88E6XXX
|
|||
bool
|
||||
default n
|
||||
|
||||
config NET_DSA_MV88E6060
|
||||
bool "Marvell 88E6060 ethernet switch chip support"
|
||||
select NET_DSA_TAG_TRAILER
|
||||
---help---
|
||||
This enables support for the Marvell 88E6060 ethernet switch
|
||||
chip.
|
||||
|
||||
config NET_DSA_MV88E6XXX_NEED_PPU
|
||||
bool
|
||||
default n
|
||||
|
|
|
|||
|
|
@ -5,6 +5,7 @@ obj-$(CONFIG_NET_DSA_TAG_TRAILER) += tag_trailer.o
|
|||
|
||||
# switch drivers
|
||||
obj-$(CONFIG_NET_DSA_MV88E6XXX) += mv88e6xxx.o
|
||||
obj-$(CONFIG_NET_DSA_MV88E6060) += mv88e6060.o
|
||||
obj-$(CONFIG_NET_DSA_MV88E6123_61_65) += mv88e6123_61_65.o
|
||||
obj-$(CONFIG_NET_DSA_MV88E6131) += mv88e6131.o
|
||||
|
||||
|
|
|
|||
|
|
@ -0,0 +1,287 @@
|
|||
/*
|
||||
* net/dsa/mv88e6060.c - Driver for Marvell 88e6060 switch chips
|
||||
* Copyright (c) 2008 Marvell Semiconductor
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*/
|
||||
|
||||
#include <linux/list.h>
|
||||
#include <linux/netdevice.h>
|
||||
#include <linux/phy.h>
|
||||
#include "dsa_priv.h"
|
||||
|
||||
#define REG_PORT(p) (8 + (p))
|
||||
#define REG_GLOBAL 0x0f
|
||||
|
||||
static int reg_read(struct dsa_switch *ds, int addr, int reg)
|
||||
{
|
||||
return mdiobus_read(ds->master_mii_bus, addr, reg);
|
||||
}
|
||||
|
||||
#define REG_READ(addr, reg) \
|
||||
({ \
|
||||
int __ret; \
|
||||
\
|
||||
__ret = reg_read(ds, addr, reg); \
|
||||
if (__ret < 0) \
|
||||
return __ret; \
|
||||
__ret; \
|
||||
})
|
||||
|
||||
|
||||
static int reg_write(struct dsa_switch *ds, int addr, int reg, u16 val)
|
||||
{
|
||||
return mdiobus_write(ds->master_mii_bus, addr, reg, val);
|
||||
}
|
||||
|
||||
#define REG_WRITE(addr, reg, val) \
|
||||
({ \
|
||||
int __ret; \
|
||||
\
|
||||
__ret = reg_write(ds, addr, reg, val); \
|
||||
if (__ret < 0) \
|
||||
return __ret; \
|
||||
})
|
||||
|
||||
static char *mv88e6060_probe(struct mii_bus *bus, int sw_addr)
|
||||
{
|
||||
int ret;
|
||||
|
||||
ret = mdiobus_read(bus, REG_PORT(0), 0x03);
|
||||
if (ret >= 0) {
|
||||
ret &= 0xfff0;
|
||||
if (ret == 0x0600)
|
||||
return "Marvell 88E6060";
|
||||
}
|
||||
|
||||
return NULL;
|
||||
}
|
||||
|
||||
static int mv88e6060_switch_reset(struct dsa_switch *ds)
|
||||
{
|
||||
int i;
|
||||
int ret;
|
||||
|
||||
/*
|
||||
* Set all ports to the disabled state.
|
||||
*/
|
||||
for (i = 0; i < 6; i++) {
|
||||
ret = REG_READ(REG_PORT(i), 0x04);
|
||||
REG_WRITE(REG_PORT(i), 0x04, ret & 0xfffc);
|
||||
}
|
||||
|
||||
/*
|
||||
* Wait for transmit queues to drain.
|
||||
*/
|
||||
msleep(2);
|
||||
|
||||
/*
|
||||
* Reset the switch.
|
||||
*/
|
||||
REG_WRITE(REG_GLOBAL, 0x0A, 0xa130);
|
||||
|
||||
/*
|
||||
* Wait up to one second for reset to complete.
|
||||
*/
|
||||
for (i = 0; i < 1000; i++) {
|
||||
ret = REG_READ(REG_GLOBAL, 0x00);
|
||||
if ((ret & 0x8000) == 0x0000)
|
||||
break;
|
||||
|
||||
msleep(1);
|
||||
}
|
||||
if (i == 1000)
|
||||
return -ETIMEDOUT;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int mv88e6060_setup_global(struct dsa_switch *ds)
|
||||
{
|
||||
/*
|
||||
* Disable discarding of frames with excessive collisions,
|
||||
* set the maximum frame size to 1536 bytes, and mask all
|
||||
* interrupt sources.
|
||||
*/
|
||||
REG_WRITE(REG_GLOBAL, 0x04, 0x0800);
|
||||
|
||||
/*
|
||||
* Enable automatic address learning, set the address
|
||||
* database size to 1024 entries, and set the default aging
|
||||
* time to 5 minutes.
|
||||
*/
|
||||
REG_WRITE(REG_GLOBAL, 0x0a, 0x2130);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int mv88e6060_setup_port(struct dsa_switch *ds, int p)
|
||||
{
|
||||
int addr = REG_PORT(p);
|
||||
|
||||
/*
|
||||
* Do not force flow control, disable Ingress and Egress
|
||||
* Header tagging, disable VLAN tunneling, and set the port
|
||||
* state to Forwarding. Additionally, if this is the CPU
|
||||
* port, enable Ingress and Egress Trailer tagging mode.
|
||||
*/
|
||||
REG_WRITE(addr, 0x04, (p == ds->cpu_port) ? 0x4103 : 0x0003);
|
||||
|
||||
/*
|
||||
* Port based VLAN map: give each port its own address
|
||||
* database, allow the CPU port to talk to each of the 'real'
|
||||
* ports, and allow each of the 'real' ports to only talk to
|
||||
* the CPU port.
|
||||
*/
|
||||
REG_WRITE(addr, 0x06,
|
||||
((p & 0xf) << 12) |
|
||||
((p == ds->cpu_port) ?
|
||||
ds->valid_port_mask :
|
||||
(1 << ds->cpu_port)));
|
||||
|
||||
/*
|
||||
* Port Association Vector: when learning source addresses
|
||||
* of packets, add the address to the address database using
|
||||
* a port bitmap that has only the bit for this port set and
|
||||
* the other bits clear.
|
||||
*/
|
||||
REG_WRITE(addr, 0x0b, 1 << p);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int mv88e6060_setup(struct dsa_switch *ds)
|
||||
{
|
||||
int i;
|
||||
int ret;
|
||||
|
||||
ret = mv88e6060_switch_reset(ds);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
/* @@@ initialise atu */
|
||||
|
||||
ret = mv88e6060_setup_global(ds);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
for (i = 0; i < 6; i++) {
|
||||
ret = mv88e6060_setup_port(ds, i);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int mv88e6060_set_addr(struct dsa_switch *ds, u8 *addr)
|
||||
{
|
||||
REG_WRITE(REG_GLOBAL, 0x01, (addr[0] << 8) | addr[1]);
|
||||
REG_WRITE(REG_GLOBAL, 0x02, (addr[2] << 8) | addr[3]);
|
||||
REG_WRITE(REG_GLOBAL, 0x03, (addr[4] << 8) | addr[5]);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int mv88e6060_port_to_phy_addr(int port)
|
||||
{
|
||||
if (port >= 0 && port <= 5)
|
||||
return port;
|
||||
return -1;
|
||||
}
|
||||
|
||||
static int mv88e6060_phy_read(struct dsa_switch *ds, int port, int regnum)
|
||||
{
|
||||
int addr;
|
||||
|
||||
addr = mv88e6060_port_to_phy_addr(port);
|
||||
if (addr == -1)
|
||||
return 0xffff;
|
||||
|
||||
return reg_read(ds, addr, regnum);
|
||||
}
|
||||
|
||||
static int
|
||||
mv88e6060_phy_write(struct dsa_switch *ds, int port, int regnum, u16 val)
|
||||
{
|
||||
int addr;
|
||||
|
||||
addr = mv88e6060_port_to_phy_addr(port);
|
||||
if (addr == -1)
|
||||
return 0xffff;
|
||||
|
||||
return reg_write(ds, addr, regnum, val);
|
||||
}
|
||||
|
||||
static void mv88e6060_poll_link(struct dsa_switch *ds)
|
||||
{
|
||||
int i;
|
||||
|
||||
for (i = 0; i < DSA_MAX_PORTS; i++) {
|
||||
struct net_device *dev;
|
||||
int port_status;
|
||||
int link;
|
||||
int speed;
|
||||
int duplex;
|
||||
int fc;
|
||||
|
||||
dev = ds->ports[i];
|
||||
if (dev == NULL)
|
||||
continue;
|
||||
|
||||
link = 0;
|
||||
if (dev->flags & IFF_UP) {
|
||||
port_status = reg_read(ds, REG_PORT(i), 0x00);
|
||||
if (port_status < 0)
|
||||
continue;
|
||||
|
||||
link = !!(port_status & 0x1000);
|
||||
}
|
||||
|
||||
if (!link) {
|
||||
if (netif_carrier_ok(dev)) {
|
||||
printk(KERN_INFO "%s: link down\n", dev->name);
|
||||
netif_carrier_off(dev);
|
||||
}
|
||||
continue;
|
||||
}
|
||||
|
||||
speed = (port_status & 0x0100) ? 100 : 10;
|
||||
duplex = (port_status & 0x0200) ? 1 : 0;
|
||||
fc = ((port_status & 0xc000) == 0xc000) ? 1 : 0;
|
||||
|
||||
if (!netif_carrier_ok(dev)) {
|
||||
printk(KERN_INFO "%s: link up, %d Mb/s, %s duplex, "
|
||||
"flow control %sabled\n", dev->name,
|
||||
speed, duplex ? "full" : "half",
|
||||
fc ? "en" : "dis");
|
||||
netif_carrier_on(dev);
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
static struct dsa_switch_driver mv88e6060_switch_driver = {
|
||||
.tag_protocol = htons(ETH_P_TRAILER),
|
||||
.probe = mv88e6060_probe,
|
||||
.setup = mv88e6060_setup,
|
||||
.set_addr = mv88e6060_set_addr,
|
||||
.phy_read = mv88e6060_phy_read,
|
||||
.phy_write = mv88e6060_phy_write,
|
||||
.poll_link = mv88e6060_poll_link,
|
||||
};
|
||||
|
||||
int __init mv88e6060_init(void)
|
||||
{
|
||||
register_switch_driver(&mv88e6060_switch_driver);
|
||||
return 0;
|
||||
}
|
||||
module_init(mv88e6060_init);
|
||||
|
||||
void __exit mv88e6060_cleanup(void)
|
||||
{
|
||||
unregister_switch_driver(&mv88e6060_switch_driver);
|
||||
}
|
||||
module_exit(mv88e6060_cleanup);
|
||||
Loading…
Reference in New Issue