Merge branch 'next/board' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc

* 'next/board' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc:
  ARM: S3C64XX: Configure backup battery charger on Cragganmore
  ARM: S3C64XX: Fix WM8915 IRQ polarity on Cragganmore
  ARM: S3C64XX: Configure supplies for all Cragganmore regulators
  ARM: S3C64XX: Refresh Cragganmore support
  ARM: S3C64XX: Initial support for Wolfson/Simtec Cragganmore/Banff
  OMAP4: Keyboard: Mux changes in the board file
  omap: blaze: add mmc5/wl1283 device support
  omap: 4430SDP: Register the card detect GPIO properly
  arm: omap3: cm-t35: add support for cm-t3730
  OMAP3: beagle: add support for beagleboard xM revision C
  OMAP3: rx-51: Add full regulator definitions
  omap: rx51: Platform support for lp5523 led chip
This commit is contained in:
Linus Torvalds 2011-07-26 17:13:04 -07:00
commit 2d86a3f04e
12 changed files with 1204 additions and 47 deletions

View File

@ -266,9 +266,10 @@ config MACH_OMAP_ZOOM3
select REGULATOR_FIXED_VOLTAGE
config MACH_CM_T35
bool "CompuLab CM-T35 module"
bool "CompuLab CM-T35/CM-T3730 modules"
depends on ARCH_OMAP3
default y
select MACH_CM_T3730
select OMAP_PACKAGE_CUS
config MACH_CM_T3517
@ -277,6 +278,9 @@ config MACH_CM_T3517
default y
select OMAP_PACKAGE_CBB
config MACH_CM_T3730
bool
config MACH_IGEP0020
bool "IGEP v2 board"
depends on ARCH_OMAP3

View File

@ -22,6 +22,7 @@
#include <linux/i2c/twl.h>
#include <linux/gpio_keys.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/fixed.h>
#include <linux/leds.h>
#include <linux/leds_pwm.h>
@ -37,6 +38,7 @@
#include <plat/mmc.h>
#include <plat/omap4-keypad.h>
#include <video/omapdss.h>
#include <linux/wl12xx.h>
#include "mux.h"
#include "hsmmc.h"
@ -51,6 +53,9 @@
#define HDMI_GPIO_HPD 60 /* Hot plug pin for HDMI */
#define HDMI_GPIO_LS_OE 41 /* Level shifter for HDMI */
#define GPIO_WIFI_PMENA 54
#define GPIO_WIFI_IRQ 53
static const int sdp4430_keymap[] = {
KEY(0, 0, KEY_E),
KEY(0, 1, KEY_R),
@ -124,6 +129,64 @@ static const int sdp4430_keymap[] = {
KEY(7, 6, KEY_OK),
KEY(7, 7, KEY_DOWN),
};
static struct omap_device_pad keypad_pads[] __initdata = {
{ .name = "kpd_col1.kpd_col1",
.enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1,
},
{ .name = "kpd_col1.kpd_col1",
.enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1,
},
{ .name = "kpd_col2.kpd_col2",
.enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1,
},
{ .name = "kpd_col3.kpd_col3",
.enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1,
},
{ .name = "kpd_col4.kpd_col4",
.enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1,
},
{ .name = "kpd_col5.kpd_col5",
.enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1,
},
{ .name = "gpmc_a23.kpd_col7",
.enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1,
},
{ .name = "gpmc_a22.kpd_col6",
.enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1,
},
{ .name = "kpd_row0.kpd_row0",
.enable = OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN |
OMAP_MUX_MODE1 | OMAP_INPUT_EN,
},
{ .name = "kpd_row1.kpd_row1",
.enable = OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN |
OMAP_MUX_MODE1 | OMAP_INPUT_EN,
},
{ .name = "kpd_row2.kpd_row2",
.enable = OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN |
OMAP_MUX_MODE1 | OMAP_INPUT_EN,
},
{ .name = "kpd_row3.kpd_row3",
.enable = OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN |
OMAP_MUX_MODE1 | OMAP_INPUT_EN,
},
{ .name = "kpd_row4.kpd_row4",
.enable = OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN |
OMAP_MUX_MODE1 | OMAP_INPUT_EN,
},
{ .name = "kpd_row5.kpd_row5",
.enable = OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN |
OMAP_MUX_MODE1 | OMAP_INPUT_EN,
},
{ .name = "gpmc_a18.kpd_row6",
.enable = OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN |
OMAP_MUX_MODE1 | OMAP_INPUT_EN,
},
{ .name = "gpmc_a19.kpd_row7",
.enable = OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN |
OMAP_MUX_MODE1 | OMAP_INPUT_EN,
},
};
static struct matrix_keymap_data sdp4430_keymap_data = {
.keymap = sdp4430_keymap,
@ -135,6 +198,13 @@ static struct omap4_keypad_platform_data sdp4430_keypad_data = {
.rows = 8,
.cols = 8,
};
static struct omap_board_data keypad_data = {
.id = 1,
.pads = keypad_pads,
.pads_cnt = ARRAY_SIZE(keypad_pads),
};
static struct gpio_led sdp4430_gpio_leds[] = {
{
.name = "omap4:green:debug0",
@ -315,8 +385,17 @@ static struct omap2_hsmmc_info mmc[] = {
{
.mmc = 1,
.caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
.gpio_cd = -EINVAL,
.gpio_wp = -EINVAL,
},
{
.mmc = 5,
.caps = MMC_CAP_4_BIT_DATA | MMC_CAP_POWER_OFF_CARD,
.gpio_cd = -EINVAL,
.gpio_wp = -EINVAL,
.ocr_mask = MMC_VDD_165_195,
.nonremovable = true,
},
{} /* Terminator */
};
@ -324,6 +403,37 @@ static struct regulator_consumer_supply sdp4430_vaux_supply[] = {
REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"),
};
static struct regulator_consumer_supply omap4_sdp4430_vmmc5_supply = {
.supply = "vmmc",
.dev_name = "omap_hsmmc.4",
};
static struct regulator_init_data sdp4430_vmmc5 = {
.constraints = {
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = 1,
.consumer_supplies = &omap4_sdp4430_vmmc5_supply,
};
static struct fixed_voltage_config sdp4430_vwlan = {
.supply_name = "vwl1271",
.microvolts = 1800000, /* 1.8V */
.gpio = GPIO_WIFI_PMENA,
.startup_delay = 70000, /* 70msec */
.enable_high = 1,
.enabled_at_boot = 0,
.init_data = &sdp4430_vmmc5,
};
static struct platform_device omap_vwlan_device = {
.name = "reg-fixed-voltage",
.id = 1,
.dev = {
.platform_data = &sdp4430_vwlan,
},
};
static int omap4_twl6030_hsmmc_late_init(struct device *dev)
{
int ret = 0;
@ -593,6 +703,41 @@ static inline void board_serial_init(void)
}
#endif
static void omap4_sdp4430_wifi_mux_init(void)
{
omap_mux_init_gpio(GPIO_WIFI_IRQ, OMAP_PIN_INPUT |
OMAP_PIN_OFF_WAKEUPENABLE);
omap_mux_init_gpio(GPIO_WIFI_PMENA, OMAP_PIN_OUTPUT);
omap_mux_init_signal("sdmmc5_cmd.sdmmc5_cmd",
OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP);
omap_mux_init_signal("sdmmc5_clk.sdmmc5_clk",
OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP);
omap_mux_init_signal("sdmmc5_dat0.sdmmc5_dat0",
OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP);
omap_mux_init_signal("sdmmc5_dat1.sdmmc5_dat1",
OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP);
omap_mux_init_signal("sdmmc5_dat2.sdmmc5_dat2",
OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP);
omap_mux_init_signal("sdmmc5_dat3.sdmmc5_dat3",
OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP);
}
static struct wl12xx_platform_data omap4_sdp4430_wlan_data __initdata = {
.irq = OMAP_GPIO_IRQ(GPIO_WIFI_IRQ),
.board_ref_clock = WL12XX_REFCLOCK_26,
.board_tcxo_clock = WL12XX_TCXOCLOCK_26,
};
static void omap4_sdp4430_wifi_init(void)
{
omap4_sdp4430_wifi_mux_init();
if (wl12xx_set_platform_data(&omap4_sdp4430_wlan_data))
pr_err("Error setting wl12xx data\n");
platform_device_register(&omap_vwlan_device);
}
static void __init omap_4430sdp_init(void)
{
int status;
@ -609,6 +754,7 @@ static void __init omap_4430sdp_init(void)
omap_sfh7741prox_init();
platform_add_devices(sdp4430_devices, ARRAY_SIZE(sdp4430_devices));
board_serial_init();
omap4_sdp4430_wifi_init();
omap4_twl6030_hsmmc_init(mmc);
usb_musb_init(&musb_board_data);
@ -622,7 +768,7 @@ static void __init omap_4430sdp_init(void)
ARRAY_SIZE(sdp4430_spi_board_info));
}
status = omap4_keyboard_init(&sdp4430_keypad_data);
status = omap4_keyboard_init(&sdp4430_keypad_data, &keypad_data);
if (status)
pr_err("Keypad initialization failed: %d\n", status);

View File

@ -1,5 +1,5 @@
/*
* board-cm-t35.c (CompuLab CM-T35 module)
* CompuLab CM-T35/CM-T3730 modules support
*
* Copyright (C) 2009-2011 CompuLab, Ltd.
* Authors: Mike Rapoport <mike@compulab.co.il>
@ -535,17 +535,11 @@ static struct omap_board_mux board_mux[] __initdata = {
OMAP3_MUX(UART1_TX, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(UART1_RX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
/* DSS */
/* common DSS */
OMAP3_MUX(DSS_PCLK, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_HSYNC, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_VSYNC, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_ACBIAS, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_DATA0, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_DATA1, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_DATA2, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_DATA3, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_DATA4, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_DATA5, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_DATA6, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_DATA7, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_DATA8, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
@ -558,12 +552,6 @@ static struct omap_board_mux board_mux[] __initdata = {
OMAP3_MUX(DSS_DATA15, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_DATA16, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_DATA17, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_DATA18, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_DATA19, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_DATA20, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_DATA21, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_DATA22, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
OMAP3_MUX(DSS_DATA23, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
/* display controls */
OMAP3_MUX(MCBSP1_FSR, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
@ -576,19 +564,53 @@ static struct omap_board_mux board_mux[] __initdata = {
{ .reg_offset = OMAP_MUX_TERMINATOR },
};
static void __init cm_t3x_common_dss_mux_init(int mux_mode)
{
omap_mux_init_signal("dss_data18", mux_mode);
omap_mux_init_signal("dss_data19", mux_mode);
omap_mux_init_signal("dss_data20", mux_mode);
omap_mux_init_signal("dss_data21", mux_mode);
omap_mux_init_signal("dss_data22", mux_mode);
omap_mux_init_signal("dss_data23", mux_mode);
}
static void __init cm_t35_init_mux(void)
{
omap_mux_init_signal("gpio_70", OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT);
omap_mux_init_signal("gpio_71", OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT);
omap_mux_init_signal("gpio_72", OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT);
omap_mux_init_signal("gpio_73", OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT);
omap_mux_init_signal("gpio_74", OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT);
omap_mux_init_signal("gpio_75", OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT);
cm_t3x_common_dss_mux_init(OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT);
}
static void __init cm_t3730_init_mux(void)
{
omap_mux_init_signal("sys_boot0", OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT);
omap_mux_init_signal("sys_boot1", OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT);
omap_mux_init_signal("sys_boot3", OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT);
omap_mux_init_signal("sys_boot4", OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT);
omap_mux_init_signal("sys_boot5", OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT);
omap_mux_init_signal("sys_boot6", OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT);
cm_t3x_common_dss_mux_init(OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT);
}
#else
static inline void cm_t35_init_mux(void) {}
static inline void cm_t3730_init_mux(void) {}
#endif
static struct omap_board_config_kernel cm_t35_config[] __initdata = {
};
static void __init cm_t35_init(void)
static void __init cm_t3x_common_init(void)
{
omap_board_config = cm_t35_config;
omap_board_config_size = ARRAY_SIZE(cm_t35_config);
omap3_mux_init(board_mux, OMAP_PACKAGE_CUS);
omap_serial_init();
cm_t35_init_i2c();
cm_t35_init_nand();
omap_ads7846_init(1, CM_T35_GPIO_PENDOWN, 0, NULL);
cm_t35_init_ethernet();
cm_t35_init_led();
@ -598,6 +620,19 @@ static void __init cm_t35_init(void)
usbhs_init(&usbhs_bdata);
}
static void __init cm_t35_init(void)
{
cm_t3x_common_init();
cm_t35_init_mux();
cm_t35_init_nand();
}
static void __init cm_t3730_init(void)
{
cm_t3x_common_init();
cm_t3730_init_mux();
}
MACHINE_START(CM_T35, "Compulab CM-T35")
.boot_params = 0x80000100,
.reserve = omap_reserve,
@ -607,3 +642,13 @@ MACHINE_START(CM_T35, "Compulab CM-T35")
.init_machine = cm_t35_init,
.timer = &omap3_timer,
MACHINE_END
MACHINE_START(CM_T3730, "Compulab CM-T3730")
.boot_params = 0x80000100,
.reserve = omap_reserve,
.map_io = omap3_map_io,
.init_early = cm_t35_init_early,
.init_irq = omap3_init_irq,
.init_machine = cm_t3730_init,
.timer = &omap3_timer,
MACHINE_END

View File

@ -60,7 +60,8 @@
* AXBX = GPIO173, GPIO172, GPIO171: 1 1 1
* C1_3 = GPIO173, GPIO172, GPIO171: 1 1 0
* C4 = GPIO173, GPIO172, GPIO171: 1 0 1
* XM = GPIO173, GPIO172, GPIO171: 0 0 0
* XMA/XMB = GPIO173, GPIO172, GPIO171: 0 0 0
* XMC = GPIO173, GPIO172, GPIO171: 0 1 0
*/
enum {
OMAP3BEAGLE_BOARD_UNKN = 0,
@ -68,14 +69,26 @@ enum {
OMAP3BEAGLE_BOARD_C1_3,
OMAP3BEAGLE_BOARD_C4,
OMAP3BEAGLE_BOARD_XM,
OMAP3BEAGLE_BOARD_XMC,
};
static u8 omap3_beagle_version;
static u8 omap3_beagle_get_rev(void)
{
return omap3_beagle_version;
}
/*
* Board-specific configuration
* Defaults to BeagleBoard-xMC
*/
static struct {
int mmc1_gpio_wp;
int usb_pwr_level;
int reset_gpio;
int usr_button_gpio;
} beagle_config = {
.mmc1_gpio_wp = -EINVAL,
.usb_pwr_level = GPIOF_OUT_INIT_LOW,
.reset_gpio = 129,
.usr_button_gpio = 4,
};
static struct gpio omap3_beagle_rev_gpios[] __initdata = {
{ 171, GPIOF_IN, "rev_id_0" },
@ -110,18 +123,32 @@ static void __init omap3_beagle_init_rev(void)
case 7:
printk(KERN_INFO "OMAP3 Beagle Rev: Ax/Bx\n");
omap3_beagle_version = OMAP3BEAGLE_BOARD_AXBX;
beagle_config.mmc1_gpio_wp = 29;
beagle_config.reset_gpio = 170;
beagle_config.usr_button_gpio = 7;
break;
case 6:
printk(KERN_INFO "OMAP3 Beagle Rev: C1/C2/C3\n");
omap3_beagle_version = OMAP3BEAGLE_BOARD_C1_3;
beagle_config.mmc1_gpio_wp = 23;
beagle_config.reset_gpio = 170;
beagle_config.usr_button_gpio = 7;
break;
case 5:
printk(KERN_INFO "OMAP3 Beagle Rev: C4\n");
omap3_beagle_version = OMAP3BEAGLE_BOARD_C4;
beagle_config.mmc1_gpio_wp = 23;
beagle_config.reset_gpio = 170;
beagle_config.usr_button_gpio = 7;
break;
case 0:
printk(KERN_INFO "OMAP3 Beagle Rev: xM\n");
printk(KERN_INFO "OMAP3 Beagle Rev: xM Ax/Bx\n");
omap3_beagle_version = OMAP3BEAGLE_BOARD_XM;
beagle_config.usb_pwr_level = GPIOF_OUT_INIT_HIGH;
break;
case 2:
printk(KERN_INFO "OMAP3 Beagle Rev: xM C\n");
omap3_beagle_version = OMAP3BEAGLE_BOARD_XMC;
break;
default:
printk(KERN_INFO "OMAP3 Beagle Rev: unknown %hd\n", beagle_rev);
@ -225,7 +252,7 @@ static struct omap2_hsmmc_info mmc[] = {
{
.mmc = 1,
.caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
.gpio_wp = 29,
.gpio_wp = -EINVAL,
},
{} /* Terminator */
};
@ -243,17 +270,11 @@ static struct gpio_led gpio_leds[];
static int beagle_twl_gpio_setup(struct device *dev,
unsigned gpio, unsigned ngpio)
{
int r, usb_pwr_level;
int r;
if (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XM) {
mmc[0].gpio_wp = -EINVAL;
} else if ((omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_C1_3) ||
(omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_C4)) {
omap_mux_init_gpio(23, OMAP_PIN_INPUT);
mmc[0].gpio_wp = 23;
} else {
omap_mux_init_gpio(29, OMAP_PIN_INPUT);
}
if (beagle_config.mmc1_gpio_wp != -EINVAL)
omap_mux_init_gpio(beagle_config.mmc1_gpio_wp, OMAP_PIN_INPUT);
mmc[0].gpio_wp = beagle_config.mmc1_gpio_wp;
/* gpio + 0 is "mmc0_cd" (input/IRQ) */
mmc[0].gpio_cd = gpio + 0;
omap2_hsmmc_init(mmc);
@ -263,9 +284,8 @@ static int beagle_twl_gpio_setup(struct device *dev,
* high / others active low)
* DVI reset GPIO is different between beagle revisions
*/
if (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XM) {
usb_pwr_level = GPIOF_OUT_INIT_HIGH;
beagle_dvi_device.reset_gpio = 129;
/* Valid for all -xM revisions */
if (cpu_is_omap3630()) {
/*
* gpio + 1 on Xm controls the TFP410's enable line (active low)
* gpio + 2 control varies depending on the board rev as below:
@ -283,8 +303,6 @@ static int beagle_twl_gpio_setup(struct device *dev,
pr_err("%s: unable to configure DVI_LDO_EN\n",
__func__);
} else {
usb_pwr_level = GPIOF_OUT_INIT_LOW;
beagle_dvi_device.reset_gpio = 170;
/*
* REVISIT: need ehci-omap hooks for external VBUS
* power switch and overcurrent detect
@ -292,8 +310,10 @@ static int beagle_twl_gpio_setup(struct device *dev,
if (gpio_request_one(gpio + 1, GPIOF_IN, "EHCI_nOC"))
pr_err("%s: unable to configure EHCI_nOC\n", __func__);
}
beagle_dvi_device.reset_gpio = beagle_config.reset_gpio;
gpio_request_one(gpio + TWL4030_GPIO_MAX, usb_pwr_level, "nEN_USB_PWR");
gpio_request_one(gpio + TWL4030_GPIO_MAX, beagle_config.usb_pwr_level,
"nEN_USB_PWR");
/* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */
gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
@ -404,7 +424,8 @@ static struct platform_device leds_gpio = {
static struct gpio_keys_button gpio_buttons[] = {
{
.code = BTN_EXTRA,
.gpio = 7,
/* Dynamically assigned depending on board */
.gpio = -EINVAL,
.desc = "user",
.wakeup = 1,
},
@ -468,8 +489,8 @@ static void __init beagle_opp_init(void)
return;
}
/* Custom OPP enabled for XM */
if (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XM) {
/* Custom OPP enabled for all xM versions */
if (cpu_is_omap3630()) {
struct omap_hwmod *mh = omap_hwmod_lookup("mpu");
struct omap_hwmod *dh = omap_hwmod_lookup("iva");
struct device *dev;
@ -509,6 +530,9 @@ static void __init omap3_beagle_init(void)
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
omap3_beagle_init_rev();
omap3_beagle_i2c_init();
gpio_buttons[0].gpio = beagle_config.usr_button_gpio;
platform_add_devices(omap3_beagle_devices,
ARRAY_SIZE(omap3_beagle_devices));
omap_display_init(&beagle_dss_data);

View File

@ -39,6 +39,7 @@
#include <sound/tpa6130a2-plat.h>
#include <media/radio-si4713.h>
#include <media/si4713.h>
#include <linux/leds-lp5523.h>
#include <../drivers/staging/iio/light/tsl2563.h>
@ -53,6 +54,7 @@
#define RX51_WL1251_IRQ_GPIO 42
#define RX51_FMTX_RESET_GPIO 163
#define RX51_FMTX_IRQ 53
#define RX51_LP5523_CHIP_EN_GPIO 41
#define RX51_USB_TRANSCEIVER_RST_GPIO 67
@ -71,6 +73,64 @@ static struct tsl2563_platform_data rx51_tsl2563_platform_data = {
};
#endif
#if defined(CONFIG_LEDS_LP5523) || defined(CONFIG_LEDS_LP5523_MODULE)
static struct lp5523_led_config rx51_lp5523_led_config[] = {
{
.chan_nr = 0,
.led_current = 50,
}, {
.chan_nr = 1,
.led_current = 50,
}, {
.chan_nr = 2,
.led_current = 50,
}, {
.chan_nr = 3,
.led_current = 50,
}, {
.chan_nr = 4,
.led_current = 50,
}, {
.chan_nr = 5,
.led_current = 50,
}, {
.chan_nr = 6,
.led_current = 50,
}, {
.chan_nr = 7,
.led_current = 50,
}, {
.chan_nr = 8,
.led_current = 50,
}
};
static int rx51_lp5523_setup(void)
{
return gpio_request_one(RX51_LP5523_CHIP_EN_GPIO, GPIOF_DIR_OUT,
"lp5523_enable");
}
static void rx51_lp5523_release(void)
{
gpio_free(RX51_LP5523_CHIP_EN_GPIO);
}
static void rx51_lp5523_enable(bool state)
{
gpio_set_value(RX51_LP5523_CHIP_EN_GPIO, !!state);
}
static struct lp5523_platform_data rx51_lp5523_platform_data = {
.led_config = rx51_lp5523_led_config,
.num_channels = ARRAY_SIZE(rx51_lp5523_led_config),
.clock_mode = LP5523_CLOCK_AUTO,
.setup_resources = rx51_lp5523_setup,
.release_resources = rx51_lp5523_release,
.enable = rx51_lp5523_enable,
};
#endif
static struct omap2_mcspi_device_config wl1251_mcspi_config = {
.turbo_mode = 0,
.single_channel = 1,
@ -495,6 +555,32 @@ static struct regulator_init_data rx51_vmmc2 = {
.consumer_supplies = rx51_vmmc2_supplies,
};
static struct regulator_init_data rx51_vpll1 = {
.constraints = {
.name = "VPLL",
.min_uV = 1800000,
.max_uV = 1800000,
.apply_uV = true,
.always_on = true,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_MODE,
},
};
static struct regulator_init_data rx51_vpll2 = {
.constraints = {
.name = "VSDI_CSI",
.min_uV = 1800000,
.max_uV = 1800000,
.apply_uV = true,
.always_on = true,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_MODE,
},
};
static struct regulator_init_data rx51_vsim = {
.constraints = {
.name = "VMMC2_IO_18",
@ -524,6 +610,43 @@ static struct regulator_init_data rx51_vio = {
.consumer_supplies = rx51_vio_supplies,
};
static struct regulator_init_data rx51_vintana1 = {
.constraints = {
.name = "VINTANA1",
.min_uV = 1500000,
.max_uV = 1500000,
.always_on = true,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_MODE,
},
};
static struct regulator_init_data rx51_vintana2 = {
.constraints = {
.name = "VINTANA2",
.min_uV = 2750000,
.max_uV = 2750000,
.apply_uV = true,
.always_on = true,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_MODE,
},
};
static struct regulator_init_data rx51_vintdig = {
.constraints = {
.name = "VINTDIG",
.min_uV = 1500000,
.max_uV = 1500000,
.always_on = true,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_MODE,
},
};
static struct si4713_platform_data rx51_si4713_i2c_data __initdata_or_module = {
.gpio_reset = RX51_FMTX_RESET_GPIO,
};
@ -761,7 +884,12 @@ static struct twl4030_platform_data rx51_twldata __initdata = {
.vaux2 = &rx51_vaux2,
.vaux4 = &rx51_vaux4,
.vmmc1 = &rx51_vmmc1,
.vpll1 = &rx51_vpll1,
.vpll2 = &rx51_vpll2,
.vsim = &rx51_vsim,
.vintana1 = &rx51_vintana1,
.vintana2 = &rx51_vintana2,
.vintdig = &rx51_vintdig,
.vio = &rx51_vio,
};
@ -799,6 +927,12 @@ static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_2[] = {
I2C_BOARD_INFO("tsl2563", 0x29),
.platform_data = &rx51_tsl2563_platform_data,
},
#endif
#if defined(CONFIG_LEDS_LP5523) || defined(CONFIG_LEDS_LP5523_MODULE)
{
I2C_BOARD_INFO("lp5523", 0x32),
.platform_data = &rx51_lp5523_platform_data,
},
#endif
{
I2C_BOARD_INFO("tpa6130a2", 0x60),
@ -950,6 +1084,7 @@ error:
void __init rx51_peripherals_init(void)
{
rx51_i2c_init();
regulator_has_full_constraints();
gpmc_onenand_init(board_onenand_data);
board_smc91x_init();
rx51_add_gpio_keys();

View File

@ -230,7 +230,7 @@ struct omap_device_pm_latency omap_keyboard_latency[] = {
};
int __init omap4_keyboard_init(struct omap4_keypad_platform_data
*sdp4430_keypad_data)
*sdp4430_keypad_data, struct omap_board_data *bdata)
{
struct omap_device *od;
struct omap_hwmod *oh;
@ -257,6 +257,7 @@ int __init omap4_keyboard_init(struct omap4_keypad_platform_data
name, oh->name);
return PTR_ERR(od);
}
oh->mux = omap_hwmod_mux_init(bdata->pads, bdata->pads_cnt);
return 0;
}

View File

@ -267,3 +267,26 @@ config MACH_SMARTQ7
select MACH_SMARTQ
help
Machine support for the SmartQ 7
config MACH_WLF_CRAGG_6410
bool "Wolfson Cragganmore 6410"
select CPU_S3C6410
select S3C64XX_SETUP_SDHCI
select S3C64XX_SETUP_I2C1
select S3C64XX_SETUP_IDE
select S3C64XX_SETUP_FB_24BPP
select S3C64XX_SETUP_KEYPAD
select SAMSUNG_DEV_ADC
select SAMSUNG_DEV_KEYPAD
select S3C_DEV_USB_HOST
select S3C_DEV_USB_HSOTG
select S3C_DEV_HSMMC
select S3C_DEV_HSMMC1
select S3C_DEV_HSMMC2
select S3C_DEV_I2C1
select S3C_DEV_WDT
select S3C_DEV_RTC
select S3C64XX_DEV_SPI
select S3C24XX_GPIO_EXTRA128
help
Machine support for the Wolfson Cragganmore S3C6410 variant.

View File

@ -55,6 +55,7 @@ obj-$(CONFIG_MACH_HMT) += mach-hmt.o
obj-$(CONFIG_MACH_SMARTQ) += mach-smartq.o
obj-$(CONFIG_MACH_SMARTQ5) += mach-smartq5.o
obj-$(CONFIG_MACH_SMARTQ7) += mach-smartq7.o
obj-$(CONFIG_MACH_WLF_CRAGG_6410) += mach-crag6410.o
# device support

View File

@ -198,7 +198,9 @@
* interrupt controllers). */
#define IRQ_BOARD_START (IRQ_EINT_GROUP9_BASE + IRQ_EINT_GROUP9_NR + 1)
#ifdef CONFIG_SMDK6410_WM1190_EV1
#ifdef CONFIG_MACH_WLF_CRAGG_6410
#define IRQ_BOARD_NR 128
#elif defined(CONFIG_SMDK6410_WM1190_EV1)
#define IRQ_BOARD_NR 64
#elif defined(CONFIG_SMDK6410_WM1192_EV1)
#define IRQ_BOARD_NR 64

View File

@ -0,0 +1,774 @@
/* linux/arch/arm/mach-s3c64xx/mach-crag6410.c
*
* Copyright 2011 Wolfson Microelectronics plc
* Mark Brown <broonie@opensource.wolfsonmicro.com>
*
* Copyright 2011 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/list.h>
#include <linux/serial_core.h>
#include <linux/platform_device.h>
#include <linux/fb.h>
#include <linux/io.h>
#include <linux/init.h>
#include <linux/gpio.h>
#include <linux/delay.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/fixed.h>
#include <linux/pwm_backlight.h>
#include <linux/dm9000.h>
#include <linux/gpio_keys.h>
#include <linux/basic_mmio_gpio.h>
#include <linux/spi/spi.h>
#include <linux/i2c/pca953x.h>
#include <video/platform_lcd.h>
#include <linux/mfd/wm831x/core.h>
#include <linux/mfd/wm831x/pdata.h>
#include <linux/mfd/wm831x/irq.h>
#include <linux/mfd/wm831x/gpio.h>
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
#include <mach/hardware.h>
#include <mach/map.h>
#include <mach/s3c6410.h>
#include <mach/regs-sys.h>
#include <mach/regs-gpio.h>
#include <mach/regs-modem.h>
#include <mach/regs-gpio-memport.h>
#include <plat/regs-serial.h>
#include <plat/regs-fb-v4.h>
#include <plat/fb.h>
#include <plat/sdhci.h>
#include <plat/gpio-cfg.h>
#include <plat/s3c64xx-spi.h>
#include <plat/keypad.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/adc.h>
#include <plat/iic.h>
#include <plat/pm.h>
#include <sound/wm8915.h>
#include <sound/wm8962.h>
#include <sound/wm9081.h>
#define BANFF_PMIC_IRQ_BASE IRQ_BOARD_START
#define GLENFARCLAS_PMIC_IRQ_BASE (IRQ_BOARD_START + 64)
#define PCA935X_GPIO_BASE GPIO_BOARD_START
#define CODEC_GPIO_BASE (GPIO_BOARD_START + 8)
#define GLENFARCLAS_PMIC_GPIO_BASE (GPIO_BOARD_START + 16)
/* serial port setup */
#define UCON (S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK)
#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB)
#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
static struct s3c2410_uartcfg crag6410_uartcfgs[] __initdata = {
[0] = {
.hwport = 0,
.flags = 0,
.ucon = UCON,
.ulcon = ULCON,
.ufcon = UFCON,
},
[1] = {
.hwport = 1,
.flags = 0,
.ucon = UCON,
.ulcon = ULCON,
.ufcon = UFCON,
},
[2] = {
.hwport = 2,
.flags = 0,
.ucon = UCON,
.ulcon = ULCON,
.ufcon = UFCON,
},
[3] = {
.hwport = 3,
.flags = 0,
.ucon = UCON,
.ulcon = ULCON,
.ufcon = UFCON,
},
};
static struct platform_pwm_backlight_data crag6410_backlight_data = {
.pwm_id = 0,
.max_brightness = 1000,
.dft_brightness = 600,
.pwm_period_ns = 100000, /* about 1kHz */
};
static struct platform_device crag6410_backlight_device = {
.name = "pwm-backlight",
.id = -1,
.dev = {
.parent = &s3c_device_timer[0].dev,
.platform_data = &crag6410_backlight_data,
},
};
static void crag6410_lcd_power_set(struct plat_lcd_data *pd, unsigned int power)
{
pr_debug("%s: setting power %d\n", __func__, power);
if (power) {
gpio_set_value(S3C64XX_GPB(0), 1);
msleep(1);
s3c_gpio_cfgpin(S3C64XX_GPF(14), S3C_GPIO_SFN(2));
} else {
gpio_direction_output(S3C64XX_GPF(14), 0);
gpio_set_value(S3C64XX_GPB(0), 0);
}
}
static struct platform_device crag6410_lcd_powerdev = {
.name = "platform-lcd",
.id = -1,
.dev.parent = &s3c_device_fb.dev,
.dev.platform_data = &(struct plat_lcd_data) {
.set_power = crag6410_lcd_power_set,
},
};
/* 640x480 URT */
static struct s3c_fb_pd_win crag6410_fb_win0 = {
/* this is to ensure we use win0 */
.win_mode = {
.left_margin = 150,
.right_margin = 80,
.upper_margin = 40,
.lower_margin = 5,
.hsync_len = 40,
.vsync_len = 5,
.xres = 640,
.yres = 480,
},
.max_bpp = 32,
.default_bpp = 16,
.virtual_y = 480 * 2,
.virtual_x = 640,
};
/* 405566 clocks per frame => 60Hz refresh requires 24333960Hz clock */
static struct s3c_fb_platdata crag6410_lcd_pdata __initdata = {
.setup_gpio = s3c64xx_fb_gpio_setup_24bpp,
.win[0] = &crag6410_fb_win0,
.vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
.vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
};
/* 2x6 keypad */
static uint32_t crag6410_keymap[] __initdata = {
/* KEY(row, col, keycode) */
KEY(0, 0, KEY_VOLUMEUP),
KEY(0, 1, KEY_HOME),
KEY(0, 2, KEY_VOLUMEDOWN),
KEY(0, 3, KEY_HELP),
KEY(0, 4, KEY_MENU),
KEY(0, 5, KEY_MEDIA),
KEY(1, 0, 232),
KEY(1, 1, KEY_DOWN),
KEY(1, 2, KEY_LEFT),
KEY(1, 3, KEY_UP),
KEY(1, 4, KEY_RIGHT),
KEY(1, 5, KEY_CAMERA),
};
static struct matrix_keymap_data crag6410_keymap_data __initdata = {
.keymap = crag6410_keymap,
.keymap_size = ARRAY_SIZE(crag6410_keymap),
};
static struct samsung_keypad_platdata crag6410_keypad_data __initdata = {
.keymap_data = &crag6410_keymap_data,
.rows = 2,
.cols = 6,
};
static struct gpio_keys_button crag6410_gpio_keys[] = {
[0] = {
.code = KEY_SUSPEND,
.gpio = S3C64XX_GPL(10), /* EINT 18 */
.type = EV_KEY,
.wakeup = 1,
.active_low = 1,
},
[1] = {
.code = SW_FRONT_PROXIMITY,
.gpio = S3C64XX_GPN(11), /* EINT 11 */
.type = EV_SW,
},
};
static struct gpio_keys_platform_data crag6410_gpio_keydata = {
.buttons = crag6410_gpio_keys,
.nbuttons = ARRAY_SIZE(crag6410_gpio_keys),
};
static struct platform_device crag6410_gpio_keydev = {
.name = "gpio-keys",
.id = 0,
.dev.platform_data = &crag6410_gpio_keydata,
};
static struct resource crag6410_dm9k_resource[] = {
[0] = {
.start = S3C64XX_PA_XM0CSN5,
.end = S3C64XX_PA_XM0CSN5 + 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = S3C64XX_PA_XM0CSN5 + (1 << 8),
.end = S3C64XX_PA_XM0CSN5 + (1 << 8) + 1,
.flags = IORESOURCE_MEM,
},
[2] = {
.start = S3C_EINT(17),
.end = S3C_EINT(17),
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
},
};
static struct dm9000_plat_data mini6410_dm9k_pdata = {
.flags = DM9000_PLATF_16BITONLY,
};
static struct platform_device crag6410_dm9k_device = {
.name = "dm9000",
.id = -1,
.num_resources = ARRAY_SIZE(crag6410_dm9k_resource),
.resource = crag6410_dm9k_resource,
.dev.platform_data = &mini6410_dm9k_pdata,
};
static struct resource crag6410_mmgpio_resource[] = {
[0] = {
.start = S3C64XX_PA_XM0CSN4 + 1,
.end = S3C64XX_PA_XM0CSN4 + 1,
.flags = IORESOURCE_MEM,
},
};
static struct platform_device crag6410_mmgpio = {
.name = "basic-mmio-gpio",
.id = -1,
.resource = crag6410_mmgpio_resource,
.num_resources = ARRAY_SIZE(crag6410_mmgpio_resource),
.dev.platform_data = &(struct bgpio_pdata) {
.base = -1,
},
};
static struct platform_device speyside_device = {
.name = "speyside",
.id = -1,
};
static struct platform_device speyside_wm8962_device = {
.name = "speyside-wm8962",
.id = -1,
};
static struct regulator_consumer_supply wallvdd_consumers[] = {
REGULATOR_SUPPLY("SPKVDD1", "1-001a"),
REGULATOR_SUPPLY("SPKVDD2", "1-001a"),
};
static struct regulator_init_data wallvdd_data = {
.constraints = {
.always_on = 1,
},
.num_consumer_supplies = ARRAY_SIZE(wallvdd_consumers),
.consumer_supplies = wallvdd_consumers,
};
static struct fixed_voltage_config wallvdd_pdata = {
.supply_name = "WALLVDD",
.microvolts = 5000000,
.init_data = &wallvdd_data,
.gpio = -EINVAL,
};
static struct platform_device wallvdd_device = {
.name = "reg-fixed-voltage",
.id = -1,
.dev = {
.platform_data = &wallvdd_pdata,
},
};
static struct platform_device *crag6410_devices[] __initdata = {
&s3c_device_hsmmc0,
&s3c_device_hsmmc1,
&s3c_device_hsmmc2,
&s3c_device_i2c0,
&s3c_device_i2c1,
&s3c_device_fb,
&s3c_device_ohci,
&s3c_device_usb_hsotg,
&s3c_device_adc,
&s3c_device_rtc,
&s3c_device_ts,
&s3c_device_timer[0],
&s3c64xx_device_iis0,
&s3c64xx_device_iis1,
&samsung_asoc_dma,
&samsung_device_keypad,
&crag6410_gpio_keydev,
&crag6410_dm9k_device,
&s3c64xx_device_spi0,
&crag6410_mmgpio,
&crag6410_lcd_powerdev,
&crag6410_backlight_device,
&speyside_device,
&speyside_wm8962_device,
&wallvdd_device,
};
static struct pca953x_platform_data crag6410_pca_data = {
.gpio_base = PCA935X_GPIO_BASE,
.irq_base = 0,
};
static struct regulator_consumer_supply vddarm_consumers[] __initdata = {
REGULATOR_SUPPLY("vddarm", NULL),
};
static struct regulator_init_data vddarm __initdata = {
.constraints = {
.name = "VDDARM",
.min_uV = 1000000,
.max_uV = 1300000,
.always_on = 1,
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
},
.num_consumer_supplies = ARRAY_SIZE(vddarm_consumers),
.consumer_supplies = vddarm_consumers,
.supply_regulator = "WALLVDD",
};
static struct regulator_init_data vddint __initdata = {
.constraints = {
.name = "VDDINT",
.min_uV = 1000000,
.max_uV = 1200000,
.always_on = 1,
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
},
};
static struct regulator_init_data vddmem __initdata = {
.constraints = {
.name = "VDDMEM",
.always_on = 1,
},
};
static struct regulator_init_data vddsys __initdata = {
.constraints = {
.name = "VDDSYS,VDDEXT,VDDPCM,VDDSS",
.always_on = 1,
},
};
static struct regulator_consumer_supply vddmmc_consumers[] __initdata = {
REGULATOR_SUPPLY("vmmc", "s3c-sdhci.0"),
REGULATOR_SUPPLY("vmmc", "s3c-sdhci.1"),
REGULATOR_SUPPLY("vmmc", "s3c-sdhci.2"),
};
static struct regulator_init_data vddmmc __initdata = {
.constraints = {
.name = "VDDMMC,UH",
.always_on = 1,
},
.num_consumer_supplies = ARRAY_SIZE(vddmmc_consumers),
.consumer_supplies = vddmmc_consumers,
.supply_regulator = "WALLVDD",
};
static struct regulator_init_data vddotgi __initdata = {
.constraints = {
.name = "VDDOTGi",
.always_on = 1,
},
.supply_regulator = "WALLVDD",
};
static struct regulator_init_data vddotg __initdata = {
.constraints = {
.name = "VDDOTG",
.always_on = 1,
},
.supply_regulator = "WALLVDD",
};
static struct regulator_init_data vddhi __initdata = {
.constraints = {
.name = "VDDHI",
.always_on = 1,
},
.supply_regulator = "WALLVDD",
};
static struct regulator_init_data vddadc __initdata = {
.constraints = {
.name = "VDDADC,VDDDAC",
.always_on = 1,
},
.supply_regulator = "WALLVDD",
};
static struct regulator_init_data vddmem0 __initdata = {
.constraints = {
.name = "VDDMEM0",
.always_on = 1,
},
.supply_regulator = "WALLVDD",
};
static struct regulator_init_data vddpll __initdata = {
.constraints = {
.name = "VDDPLL",
.always_on = 1,
},
.supply_regulator = "WALLVDD",
};
static struct regulator_init_data vddlcd __initdata = {
.constraints = {
.name = "VDDLCD",
.always_on = 1,
},
.supply_regulator = "WALLVDD",
};
static struct regulator_init_data vddalive __initdata = {
.constraints = {
.name = "VDDALIVE",
.always_on = 1,
},
.supply_regulator = "WALLVDD",
};
static struct wm831x_backup_pdata banff_backup_pdata __initdata = {
.charger_enable = 1,
.vlim = 2500, /* mV */
.ilim = 200, /* uA */
};
static struct wm831x_status_pdata banff_red_led __initdata = {
.name = "banff:red:",
.default_src = WM831X_STATUS_MANUAL,
};
static struct wm831x_status_pdata banff_green_led __initdata = {
.name = "banff:green:",
.default_src = WM831X_STATUS_MANUAL,
};
static struct wm831x_touch_pdata touch_pdata __initdata = {
.data_irq = S3C_EINT(26),
.pd_irq = S3C_EINT(27),
};
static struct wm831x_pdata crag_pmic_pdata __initdata = {
.wm831x_num = 1,
.irq_base = BANFF_PMIC_IRQ_BASE,
.gpio_base = GPIO_BOARD_START + 8,
.backup = &banff_backup_pdata,
.gpio_defaults = {
/* GPIO11: Touchscreen data - CMOS, DBVDD, active high*/
[10] = WM831X_GPN_POL | WM831X_GPN_ENA | 0x6,
/* GPIO12: Touchscreen pen down - CMOS, DBVDD, active high*/
[11] = WM831X_GPN_POL | WM831X_GPN_ENA | 0x7,
},
.dcdc = {
&vddarm, /* DCDC1 */
&vddint, /* DCDC2 */
&vddmem, /* DCDC3 */
},
.ldo = {
&vddsys, /* LDO1 */
&vddmmc, /* LDO2 */
NULL, /* LDO3 */
&vddotgi, /* LDO4 */
&vddotg, /* LDO5 */
&vddhi, /* LDO6 */
&vddadc, /* LDO7 */
&vddmem0, /* LDO8 */
&vddpll, /* LDO9 */
&vddlcd, /* LDO10 */
&vddalive, /* LDO11 */
},
.status = {
&banff_green_led,
&banff_red_led,
},
.touch = &touch_pdata,
};
static struct i2c_board_info i2c_devs0[] __initdata = {
{ I2C_BOARD_INFO("24c08", 0x50), },
{ I2C_BOARD_INFO("tca6408", 0x20),
.platform_data = &crag6410_pca_data,
},
{ I2C_BOARD_INFO("wm8312", 0x34),
.platform_data = &crag_pmic_pdata,
.irq = S3C_EINT(23),
},
};
static struct s3c2410_platform_i2c i2c0_pdata = {
.frequency = 400000,
};
static struct regulator_init_data pvdd_1v2 __initdata = {
.constraints = {
.name = "PVDD_1V2",
.always_on = 1,
},
};
static struct regulator_consumer_supply pvdd_1v8_consumers[] __initdata = {
REGULATOR_SUPPLY("PLLVDD", "1-001a"),
REGULATOR_SUPPLY("DBVDD", "1-001a"),
REGULATOR_SUPPLY("CPVDD", "1-001a"),
REGULATOR_SUPPLY("AVDD2", "1-001a"),
REGULATOR_SUPPLY("DCVDD", "1-001a"),
REGULATOR_SUPPLY("AVDD", "1-001a"),
};
static struct regulator_init_data pvdd_1v8 __initdata = {
.constraints = {
.name = "PVDD_1V8",
.always_on = 1,
},
.consumer_supplies = pvdd_1v8_consumers,
.num_consumer_supplies = ARRAY_SIZE(pvdd_1v8_consumers),
};
static struct regulator_consumer_supply pvdd_3v3_consumers[] __initdata = {
REGULATOR_SUPPLY("MICVDD", "1-001a"),
REGULATOR_SUPPLY("AVDD1", "1-001a"),
};
static struct regulator_init_data pvdd_3v3 __initdata = {
.constraints = {
.name = "PVDD_3V3",
.always_on = 1,
},
.consumer_supplies = pvdd_3v3_consumers,
.num_consumer_supplies = ARRAY_SIZE(pvdd_3v3_consumers),
};
static struct wm831x_pdata glenfarclas_pmic_pdata __initdata = {
.wm831x_num = 2,
.irq_base = GLENFARCLAS_PMIC_IRQ_BASE,
.gpio_base = GLENFARCLAS_PMIC_GPIO_BASE,
.gpio_defaults = {
/* GPIO1-3: IRQ inputs, rising edge triggered, CMOS */
[0] = WM831X_GPN_DIR | WM831X_GPN_POL | WM831X_GPN_ENA,
[1] = WM831X_GPN_DIR | WM831X_GPN_POL | WM831X_GPN_ENA,
[2] = WM831X_GPN_DIR | WM831X_GPN_POL | WM831X_GPN_ENA,
},
.dcdc = {
&pvdd_1v2, /* DCDC1 */
&pvdd_1v8, /* DCDC2 */
&pvdd_3v3, /* DCDC3 */
},
.disable_touch = true,
};
static struct wm8915_retune_mobile_config wm8915_retune[] = {
{
.name = "Sub LPF",
.rate = 48000,
.regs = {
0x6318, 0x6300, 0x1000, 0x0000, 0x0004, 0x2000, 0xF000,
0x0000, 0x0004, 0x2000, 0xF000, 0x0000, 0x0004, 0x2000,
0xF000, 0x0000, 0x0004, 0x1000, 0x0800, 0x4000
},
},
{
.name = "Sub HPF",
.rate = 48000,
.regs = {
0x000A, 0x6300, 0x1000, 0x0000, 0x0004, 0x2000, 0xF000,
0x0000, 0x0004, 0x2000, 0xF000, 0x0000, 0x0004, 0x2000,
0xF000, 0x0000, 0x0004, 0x1000, 0x0800, 0x4000
},
},
};
static struct wm8915_pdata wm8915_pdata __initdata = {
.ldo_ena = S3C64XX_GPN(7),
.gpio_base = CODEC_GPIO_BASE,
.micdet_def = 1,
.inl_mode = WM8915_DIFFERRENTIAL_1,
.inr_mode = WM8915_DIFFERRENTIAL_1,
.irq_flags = IRQF_TRIGGER_RISING,
.gpio_default = {
0x8001, /* GPIO1 == ADCLRCLK1 */
0x8001, /* GPIO2 == ADCLRCLK2, input due to CPU */
0x0141, /* GPIO3 == HP_SEL */
0x0002, /* GPIO4 == IRQ */
0x020e, /* GPIO5 == CLKOUT */
},
.retune_mobile_cfgs = wm8915_retune,
.num_retune_mobile_cfgs = ARRAY_SIZE(wm8915_retune),
};
static struct wm8962_pdata wm8962_pdata __initdata = {
.gpio_init = {
0,
WM8962_GPIO_FN_OPCLK,
WM8962_GPIO_FN_DMICCLK,
0,
0x8000 | WM8962_GPIO_FN_DMICDAT,
WM8962_GPIO_FN_IRQ, /* Open drain mode */
},
.irq_active_low = true,
};
static struct wm9081_pdata wm9081_pdata __initdata = {
.irq_high = false,
.irq_cmos = false,
};
static struct i2c_board_info i2c_devs1[] __initdata = {
{ I2C_BOARD_INFO("wm8311", 0x34),
.irq = S3C_EINT(0),
.platform_data = &glenfarclas_pmic_pdata },
{ I2C_BOARD_INFO("wm1250-ev1", 0x27) },
{ I2C_BOARD_INFO("wm8915", 0x1a),
.platform_data = &wm8915_pdata,
.irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2,
},
{ I2C_BOARD_INFO("wm9081", 0x6c),
.platform_data = &wm9081_pdata, },
{ I2C_BOARD_INFO("wm8962", 0x1a),
.platform_data = &wm8962_pdata,
.irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2,
},
};
static void __init crag6410_map_io(void)
{
s3c64xx_init_io(NULL, 0);
s3c24xx_init_clocks(12000000);
s3c24xx_init_uarts(crag6410_uartcfgs, ARRAY_SIZE(crag6410_uartcfgs));
/* LCD type and Bypass set by bootloader */
}
static struct s3c_sdhci_platdata crag6410_hsmmc2_pdata = {
.max_width = 4,
.cd_type = S3C_SDHCI_CD_PERMANENT,
};
static struct s3c_sdhci_platdata crag6410_hsmmc1_pdata = {
.max_width = 4,
.cd_type = S3C_SDHCI_CD_GPIO,
.ext_cd_gpio = S3C64XX_GPF(11),
};
static void crag6410_cfg_sdhci0(struct platform_device *dev, int width)
{
/* Set all the necessary GPG pins to special-function 2 */
s3c_gpio_cfgrange_nopull(S3C64XX_GPG(0), 2 + width, S3C_GPIO_SFN(2));
/* force card-detected for prototype 0 */
s3c_gpio_setpull(S3C64XX_GPG(6), S3C_GPIO_PULL_DOWN);
}
static struct s3c_sdhci_platdata crag6410_hsmmc0_pdata = {
.max_width = 4,
.cd_type = S3C_SDHCI_CD_INTERNAL,
.cfg_gpio = crag6410_cfg_sdhci0,
};
static void __init crag6410_machine_init(void)
{
/* Open drain IRQs need pullups */
s3c_gpio_setpull(S3C64XX_GPM(0), S3C_GPIO_PULL_UP);
s3c_gpio_setpull(S3C64XX_GPN(0), S3C_GPIO_PULL_UP);
gpio_request(S3C64XX_GPB(0), "LCD power");
gpio_direction_output(S3C64XX_GPB(0), 0);
gpio_request(S3C64XX_GPF(14), "LCD PWM");
gpio_direction_output(S3C64XX_GPF(14), 0); /* turn off */
gpio_request(S3C64XX_GPB(1), "SD power");
gpio_direction_output(S3C64XX_GPB(1), 0);
gpio_request(S3C64XX_GPF(10), "nRESETSEL");
gpio_direction_output(S3C64XX_GPF(10), 1);
s3c_sdhci0_set_platdata(&crag6410_hsmmc0_pdata);
s3c_sdhci1_set_platdata(&crag6410_hsmmc1_pdata);
s3c_sdhci2_set_platdata(&crag6410_hsmmc2_pdata);
s3c_i2c0_set_platdata(&i2c0_pdata);
s3c_i2c1_set_platdata(NULL);
s3c_fb_set_platdata(&crag6410_lcd_pdata);
i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0));
i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
samsung_keypad_set_platdata(&crag6410_keypad_data);
platform_add_devices(crag6410_devices, ARRAY_SIZE(crag6410_devices));
regulator_has_full_constraints();
s3c_pm_init();
}
MACHINE_START(WLF_CRAGG_6410, "Wolfson Cragganmore 6410")
/* Maintainer: Mark Brown <broonie@opensource.wolfsonmicro.com> */
.boot_params = S3C64XX_PA_SDRAM + 0x100,
.init_irq = s3c6410_init_irq,
.map_io = crag6410_map_io,
.init_machine = crag6410_machine_init,
.timer = &s3c24xx_timer,
MACHINE_END

View File

@ -10,5 +10,6 @@ struct omap4_keypad_platform_data {
u8 cols;
};
extern int omap4_keyboard_init(struct omap4_keypad_platform_data *);
extern int omap4_keyboard_init(struct omap4_keypad_platform_data *,
struct omap_board_data *);
#endif

View File

@ -148,6 +148,7 @@ static inline void __arch_decomp_setup(unsigned long arch_id)
/* omap3 based boards using UART3 */
DEBUG_LL_OMAP3(3, cm_t35);
DEBUG_LL_OMAP3(3, cm_t3517);
DEBUG_LL_OMAP3(3, cm_t3730);
DEBUG_LL_OMAP3(3, craneboard);
DEBUG_LL_OMAP3(3, devkit8000);
DEBUG_LL_OMAP3(3, igep0020);