From 2c756feb18d9ec258dbb3a3d11c47e28820690d7 Mon Sep 17 00:00:00 2001 From: "Christopher S. Hall" Date: Mon, 22 Feb 2016 03:15:23 -0800 Subject: [PATCH] time: Add history to cross timestamp interface supporting slower devices Another representative use case of time sync and the correlated clocksource (in addition to PTP noted above) is PTP synchronized audio. In a streaming application, as an example, samples will be sent and/or received by multiple devices with a presentation time that is in terms of the PTP master clock. Synchronizing the audio output on these devices requires correlating the audio clock with the PTP master clock. The more precise this correlation is, the better the audio quality (i.e. out of sync audio sounds bad). From an application standpoint, to correlate the PTP master clock with the audio device clock, the system clock is used as a intermediate timebase. The transforms such an application would perform are: System Clock <-> Audio clock System Clock <-> Network Device Clock [<-> PTP Master Clock] Modern Intel platforms can perform a more accurate cross timestamp in hardware (ART,audio device clock). The audio driver requires ART->system time transforms -- the same as required for the network driver. These platforms offload audio processing (including cross-timestamps) to a DSP which to ensure uninterrupted audio processing, communicates and response to the host only once every millsecond. As a result is takes up to a millisecond for the DSP to receive a request, the request is processed by the DSP, the audio output hardware is polled for completion, the result is copied into shared memory, and the host is notified. All of these operation occur on a millisecond cadence. This transaction requires about 2 ms, but under heavier workloads it may take up to 4 ms. Adding a history allows these slow devices the option of providing an ART value outside of the current interval. In this case, the callback provided is an accessor function for the previously obtained counter value. If get_system_device_crosststamp() receives a counter value previous to cycle_last, it consults the history provided as an argument in history_ref and interpolates the realtime and monotonic raw system time using the provided counter value. If there are any clock discontinuities, e.g. from calling settimeofday(), the monotonic raw time is interpolated in the usual way, but the realtime clock time is adjusted by scaling the monotonic raw adjustment. When an accessor function is used a history argument *must* be provided. The history is initialized using ktime_get_snapshot() and must be called before the counter values are read. Cc: Prarit Bhargava Cc: Richard Cochran Cc: Thomas Gleixner Cc: Ingo Molnar Cc: Andy Lutomirski Cc: kevin.b.stanton@intel.com Cc: kevin.j.clarke@intel.com Cc: hpa@zytor.com Cc: jeffrey.t.kirsher@intel.com Cc: netdev@vger.kernel.org Reviewed-by: Thomas Gleixner Signed-off-by: Christopher S. Hall [jstultz: Fixed up cycles_t/cycle_t type confusion] Signed-off-by: John Stultz --- include/linux/timekeeper_internal.h | 2 + include/linux/timekeeping.h | 5 + kernel/time/timekeeping.c | 171 +++++++++++++++++++++++++++- 3 files changed, 177 insertions(+), 1 deletion(-) diff --git a/include/linux/timekeeper_internal.h b/include/linux/timekeeper_internal.h index 25247220b4b7..e88005459035 100644 --- a/include/linux/timekeeper_internal.h +++ b/include/linux/timekeeper_internal.h @@ -50,6 +50,7 @@ struct tk_read_base { * @offs_tai: Offset clock monotonic -> clock tai * @tai_offset: The current UTC to TAI offset in seconds * @clock_was_set_seq: The sequence number of clock was set events + * @cs_was_changed_seq: The sequence number of clocksource change events * @next_leap_ktime: CLOCK_MONOTONIC time value of a pending leap-second * @raw_time: Monotonic raw base time in timespec64 format * @cycle_interval: Number of clock cycles in one NTP interval @@ -91,6 +92,7 @@ struct timekeeper { ktime_t offs_tai; s32 tai_offset; unsigned int clock_was_set_seq; + u8 cs_was_changed_seq; ktime_t next_leap_ktime; struct timespec64 raw_time; diff --git a/include/linux/timekeeping.h b/include/linux/timekeeping.h index 4a2ca65fc778..96f37bee3bc1 100644 --- a/include/linux/timekeeping.h +++ b/include/linux/timekeeping.h @@ -272,11 +272,15 @@ extern void ktime_get_raw_and_real_ts64(struct timespec64 *ts_raw, * @cycles: Clocksource counter value to produce the system times * @real: Realtime system time * @raw: Monotonic raw system time + * @clock_was_set_seq: The sequence number of clock was set events + * @cs_was_changed_seq: The sequence number of clocksource change events */ struct system_time_snapshot { cycle_t cycles; ktime_t real; ktime_t raw; + unsigned int clock_was_set_seq; + u8 cs_was_changed_seq; }; /* @@ -312,6 +316,7 @@ extern int get_device_system_crosststamp( struct system_counterval_t *system_counterval, void *ctx), void *ctx, + struct system_time_snapshot *history, struct system_device_crosststamp *xtstamp); /* diff --git a/kernel/time/timekeeping.c b/kernel/time/timekeeping.c index dba595cdb200..931b0b1a71e9 100644 --- a/kernel/time/timekeeping.c +++ b/kernel/time/timekeeping.c @@ -233,6 +233,7 @@ static void tk_setup_internals(struct timekeeper *tk, struct clocksource *clock) u64 tmp, ntpinterval; struct clocksource *old_clock; + ++tk->cs_was_changed_seq; old_clock = tk->tkr_mono.clock; tk->tkr_mono.clock = clock; tk->tkr_mono.read = clock->read; @@ -894,6 +895,8 @@ void ktime_get_snapshot(struct system_time_snapshot *systime_snapshot) seq = read_seqcount_begin(&tk_core.seq); now = tk->tkr_mono.read(tk->tkr_mono.clock); + systime_snapshot->cs_was_changed_seq = tk->cs_was_changed_seq; + systime_snapshot->clock_was_set_seq = tk->clock_was_set_seq; base_real = ktime_add(tk->tkr_mono.base, tk_core.timekeeper.offs_real); base_raw = tk->tkr_raw.base; @@ -907,10 +910,123 @@ void ktime_get_snapshot(struct system_time_snapshot *systime_snapshot) } EXPORT_SYMBOL_GPL(ktime_get_snapshot); +/* Scale base by mult/div checking for overflow */ +static int scale64_check_overflow(u64 mult, u64 div, u64 *base) +{ + u64 tmp, rem; + + tmp = div64_u64_rem(*base, div, &rem); + + if (((int)sizeof(u64)*8 - fls64(mult) < fls64(tmp)) || + ((int)sizeof(u64)*8 - fls64(mult) < fls64(rem))) + return -EOVERFLOW; + tmp *= mult; + rem *= mult; + + do_div(rem, div); + *base = tmp + rem; + return 0; +} + +/** + * adjust_historical_crosststamp - adjust crosstimestamp previous to current interval + * @history: Snapshot representing start of history + * @partial_history_cycles: Cycle offset into history (fractional part) + * @total_history_cycles: Total history length in cycles + * @discontinuity: True indicates clock was set on history period + * @ts: Cross timestamp that should be adjusted using + * partial/total ratio + * + * Helper function used by get_device_system_crosststamp() to correct the + * crosstimestamp corresponding to the start of the current interval to the + * system counter value (timestamp point) provided by the driver. The + * total_history_* quantities are the total history starting at the provided + * reference point and ending at the start of the current interval. The cycle + * count between the driver timestamp point and the start of the current + * interval is partial_history_cycles. + */ +static int adjust_historical_crosststamp(struct system_time_snapshot *history, + cycle_t partial_history_cycles, + cycle_t total_history_cycles, + bool discontinuity, + struct system_device_crosststamp *ts) +{ + struct timekeeper *tk = &tk_core.timekeeper; + u64 corr_raw, corr_real; + bool interp_forward; + int ret; + + if (total_history_cycles == 0 || partial_history_cycles == 0) + return 0; + + /* Interpolate shortest distance from beginning or end of history */ + interp_forward = partial_history_cycles > total_history_cycles/2 ? + true : false; + partial_history_cycles = interp_forward ? + total_history_cycles - partial_history_cycles : + partial_history_cycles; + + /* + * Scale the monotonic raw time delta by: + * partial_history_cycles / total_history_cycles + */ + corr_raw = (u64)ktime_to_ns( + ktime_sub(ts->sys_monoraw, history->raw)); + ret = scale64_check_overflow(partial_history_cycles, + total_history_cycles, &corr_raw); + if (ret) + return ret; + + /* + * If there is a discontinuity in the history, scale monotonic raw + * correction by: + * mult(real)/mult(raw) yielding the realtime correction + * Otherwise, calculate the realtime correction similar to monotonic + * raw calculation + */ + if (discontinuity) { + corr_real = mul_u64_u32_div + (corr_raw, tk->tkr_mono.mult, tk->tkr_raw.mult); + } else { + corr_real = (u64)ktime_to_ns( + ktime_sub(ts->sys_realtime, history->real)); + ret = scale64_check_overflow(partial_history_cycles, + total_history_cycles, &corr_real); + if (ret) + return ret; + } + + /* Fixup monotonic raw and real time time values */ + if (interp_forward) { + ts->sys_monoraw = ktime_add_ns(history->raw, corr_raw); + ts->sys_realtime = ktime_add_ns(history->real, corr_real); + } else { + ts->sys_monoraw = ktime_sub_ns(ts->sys_monoraw, corr_raw); + ts->sys_realtime = ktime_sub_ns(ts->sys_realtime, corr_real); + } + + return 0; +} + +/* + * cycle_between - true if test occurs chronologically between before and after + */ +static bool cycle_between(cycle_t before, cycle_t test, cycle_t after) +{ + if (test > before && test < after) + return true; + if (test < before && before > after) + return true; + return false; +} + /** * get_device_system_crosststamp - Synchronously capture system/device timestamp - * @sync_devicetime: Callback to get simultaneous device time and + * @get_time_fn: Callback to get simultaneous device time and * system counter from the device driver + * @ctx: Context passed to get_time_fn() + * @history_begin: Historical reference point used to interpolate system + * time when counter provided by the driver is before the current interval * @xtstamp: Receives simultaneously captured system and device time * * Reads a timestamp from a device and correlates it to system time @@ -920,13 +1036,18 @@ int get_device_system_crosststamp(int (*get_time_fn) struct system_counterval_t *sys_counterval, void *ctx), void *ctx, + struct system_time_snapshot *history_begin, struct system_device_crosststamp *xtstamp) { struct system_counterval_t system_counterval; struct timekeeper *tk = &tk_core.timekeeper; + cycle_t cycles, now, interval_start; + unsigned int clock_was_set_seq; ktime_t base_real, base_raw; s64 nsec_real, nsec_raw; + u8 cs_was_changed_seq; unsigned long seq; + bool do_interp; int ret; do { @@ -946,6 +1067,22 @@ int get_device_system_crosststamp(int (*get_time_fn) */ if (tk->tkr_mono.clock != system_counterval.cs) return -ENODEV; + cycles = system_counterval.cycles; + + /* + * Check whether the system counter value provided by the + * device driver is on the current timekeeping interval. + */ + now = tk->tkr_mono.read(tk->tkr_mono.clock); + interval_start = tk->tkr_mono.cycle_last; + if (!cycle_between(interval_start, cycles, now)) { + clock_was_set_seq = tk->clock_was_set_seq; + cs_was_changed_seq = tk->cs_was_changed_seq; + cycles = interval_start; + do_interp = true; + } else { + do_interp = false; + } base_real = ktime_add(tk->tkr_mono.base, tk_core.timekeeper.offs_real); @@ -959,6 +1096,38 @@ int get_device_system_crosststamp(int (*get_time_fn) xtstamp->sys_realtime = ktime_add_ns(base_real, nsec_real); xtstamp->sys_monoraw = ktime_add_ns(base_raw, nsec_raw); + + /* + * Interpolate if necessary, adjusting back from the start of the + * current interval + */ + if (do_interp) { + cycle_t partial_history_cycles, total_history_cycles; + bool discontinuity; + + /* + * Check that the counter value occurs after the provided + * history reference and that the history doesn't cross a + * clocksource change + */ + if (!history_begin || + !cycle_between(history_begin->cycles, + system_counterval.cycles, cycles) || + history_begin->cs_was_changed_seq != cs_was_changed_seq) + return -EINVAL; + partial_history_cycles = cycles - system_counterval.cycles; + total_history_cycles = cycles - history_begin->cycles; + discontinuity = + history_begin->clock_was_set_seq != clock_was_set_seq; + + ret = adjust_historical_crosststamp(history_begin, + partial_history_cycles, + total_history_cycles, + discontinuity, xtstamp); + if (ret) + return ret; + } + return 0; } EXPORT_SYMBOL_GPL(get_device_system_crosststamp);