ixgbe: Implement HAVE_SET_RX_MODE

Implement HAVE_SET_RX_MODE in the driver for MC and UC lists.

Signed-off-by: Christopher Leech <christopher.leech@intel.com>
Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
This commit is contained in:
Christopher Leech 2008-08-26 04:27:02 -07:00 committed by Jeff Garzik
parent 9da09bb1b8
commit 2c5645cf65
5 changed files with 169 additions and 50 deletions

View File

@ -36,6 +36,8 @@
#define IXGBE_82598_MAX_TX_QUEUES 32
#define IXGBE_82598_MAX_RX_QUEUES 64
#define IXGBE_82598_RAR_ENTRIES 16
#define IXGBE_82598_MC_TBL_SIZE 128
#define IXGBE_82598_VFT_TBL_SIZE 128
static s32 ixgbe_get_invariants_82598(struct ixgbe_hw *hw);
static s32 ixgbe_get_link_settings_82598(struct ixgbe_hw *hw, u32 *speed,
@ -60,7 +62,9 @@ static s32 ixgbe_get_invariants_82598(struct ixgbe_hw *hw)
{
hw->mac.num_rx_queues = IXGBE_82598_MAX_RX_QUEUES;
hw->mac.num_tx_queues = IXGBE_82598_MAX_TX_QUEUES;
hw->mac.num_rx_addrs = IXGBE_82598_RAR_ENTRIES;
hw->mac.mcft_size = IXGBE_82598_MC_TBL_SIZE;
hw->mac.vft_size = IXGBE_82598_VFT_TBL_SIZE;
hw->mac.num_rar_entries = IXGBE_82598_RAR_ENTRIES;
/* PHY ops are filled in by default properly for Fiber only */
if (hw->mac.ops.get_media_type(hw) == ixgbe_media_type_copper) {

View File

@ -661,7 +661,7 @@ s32 ixgbe_set_rar(struct ixgbe_hw *hw, u32 index, u8 *addr, u32 vind,
static s32 ixgbe_init_rx_addrs(struct ixgbe_hw *hw)
{
u32 i;
u32 rar_entries = hw->mac.num_rx_addrs;
u32 rar_entries = hw->mac.num_rar_entries;
/*
* If the current mac address is valid, assume it is a software override
@ -705,12 +705,113 @@ static s32 ixgbe_init_rx_addrs(struct ixgbe_hw *hw)
IXGBE_WRITE_REG(hw, IXGBE_MCSTCTRL, hw->mac.mc_filter_type);
hw_dbg(hw, " Clearing MTA\n");
for (i = 0; i < IXGBE_MC_TBL_SIZE; i++)
for (i = 0; i < hw->mac.mcft_size; i++)
IXGBE_WRITE_REG(hw, IXGBE_MTA(i), 0);
return 0;
}
/**
* ixgbe_add_uc_addr - Adds a secondary unicast address.
* @hw: pointer to hardware structure
* @addr: new address
*
* Adds it to unused receive address register or goes into promiscuous mode.
**/
void ixgbe_add_uc_addr(struct ixgbe_hw *hw, u8 *addr)
{
u32 rar_entries = hw->mac.num_rar_entries;
u32 rar;
hw_dbg(hw, " UC Addr = %.2X %.2X %.2X %.2X %.2X %.2X\n",
addr[0], addr[1], addr[2], addr[3], addr[4], addr[5]);
/*
* Place this address in the RAR if there is room,
* else put the controller into promiscuous mode
*/
if (hw->addr_ctrl.rar_used_count < rar_entries) {
rar = hw->addr_ctrl.rar_used_count -
hw->addr_ctrl.mc_addr_in_rar_count;
ixgbe_set_rar(hw, rar, addr, 0, IXGBE_RAH_AV);
hw_dbg(hw, "Added a secondary address to RAR[%d]\n", rar);
hw->addr_ctrl.rar_used_count++;
} else {
hw->addr_ctrl.overflow_promisc++;
}
hw_dbg(hw, "ixgbe_add_uc_addr Complete\n");
}
/**
* ixgbe_update_uc_addr_list - Updates MAC list of secondary addresses
* @hw: pointer to hardware structure
* @addr_list: the list of new addresses
* @addr_count: number of addresses
* @next: iterator function to walk the address list
*
* The given list replaces any existing list. Clears the secondary addrs from
* receive address registers. Uses unused receive address registers for the
* first secondary addresses, and falls back to promiscuous mode as needed.
*
* Drivers using secondary unicast addresses must set user_set_promisc when
* manually putting the device into promiscuous mode.
**/
s32 ixgbe_update_uc_addr_list(struct ixgbe_hw *hw, u8 *addr_list,
u32 addr_count, ixgbe_mc_addr_itr next)
{
u8 *addr;
u32 i;
u32 old_promisc_setting = hw->addr_ctrl.overflow_promisc;
u32 uc_addr_in_use;
u32 fctrl;
u32 vmdq;
/*
* Clear accounting of old secondary address list,
* don't count RAR[0]
*/
uc_addr_in_use = hw->addr_ctrl.rar_used_count -
hw->addr_ctrl.mc_addr_in_rar_count - 1;
hw->addr_ctrl.rar_used_count -= uc_addr_in_use;
hw->addr_ctrl.overflow_promisc = 0;
/* Zero out the other receive addresses */
hw_dbg(hw, "Clearing RAR[1-%d]\n", uc_addr_in_use);
for (i = 1; i <= uc_addr_in_use; i++) {
IXGBE_WRITE_REG(hw, IXGBE_RAL(i), 0);
IXGBE_WRITE_REG(hw, IXGBE_RAH(i), 0);
}
/* Add the new addresses */
for (i = 0; i < addr_count; i++) {
hw_dbg(hw, " Adding the secondary addresses:\n");
addr = next(hw, &addr_list, &vmdq);
ixgbe_add_uc_addr(hw, addr);
}
if (hw->addr_ctrl.overflow_promisc) {
/* enable promisc if not already in overflow or set by user */
if (!old_promisc_setting && !hw->addr_ctrl.user_set_promisc) {
hw_dbg(hw, " Entering address overflow promisc mode\n");
fctrl = IXGBE_READ_REG(hw, IXGBE_FCTRL);
fctrl |= IXGBE_FCTRL_UPE;
IXGBE_WRITE_REG(hw, IXGBE_FCTRL, fctrl);
}
} else {
/* only disable if set by overflow, not by user */
if (old_promisc_setting && !hw->addr_ctrl.user_set_promisc) {
hw_dbg(hw, " Leaving address overflow promisc mode\n");
fctrl = IXGBE_READ_REG(hw, IXGBE_FCTRL);
fctrl &= ~IXGBE_FCTRL_UPE;
IXGBE_WRITE_REG(hw, IXGBE_FCTRL, fctrl);
}
}
hw_dbg(hw, "ixgbe_update_uc_addr_list Complete\n");
return 0;
}
/**
* ixgbe_mta_vector - Determines bit-vector in multicast table to set
* @hw: pointer to hardware structure
@ -794,7 +895,7 @@ static void ixgbe_set_mta(struct ixgbe_hw *hw, u8 *mc_addr)
**/
static void ixgbe_add_mc_addr(struct ixgbe_hw *hw, u8 *mc_addr)
{
u32 rar_entries = hw->mac.num_rx_addrs;
u32 rar_entries = hw->mac.num_rar_entries;
hw_dbg(hw, " MC Addr =%.2X %.2X %.2X %.2X %.2X %.2X\n",
mc_addr[0], mc_addr[1], mc_addr[2],
@ -823,7 +924,7 @@ static void ixgbe_add_mc_addr(struct ixgbe_hw *hw, u8 *mc_addr)
* @hw: pointer to hardware structure
* @mc_addr_list: the list of new multicast addresses
* @mc_addr_count: number of addresses
* @pad: number of bytes between addresses in the list
* @next: iterator function to walk the multicast address list
*
* The given list replaces any existing list. Clears the MC addrs from receive
* address registers and the multicast table. Uses unsed receive address
@ -831,10 +932,11 @@ static void ixgbe_add_mc_addr(struct ixgbe_hw *hw, u8 *mc_addr)
* multicast table.
**/
s32 ixgbe_update_mc_addr_list(struct ixgbe_hw *hw, u8 *mc_addr_list,
u32 mc_addr_count, u32 pad)
u32 mc_addr_count, ixgbe_mc_addr_itr next)
{
u32 i;
u32 rar_entries = hw->mac.num_rx_addrs;
u32 rar_entries = hw->mac.num_rar_entries;
u32 vmdq;
/*
* Set the new number of MC addresses that we are being requested to
@ -854,14 +956,13 @@ s32 ixgbe_update_mc_addr_list(struct ixgbe_hw *hw, u8 *mc_addr_list,
/* Clear the MTA */
hw_dbg(hw, " Clearing MTA\n");
for (i = 0; i < IXGBE_MC_TBL_SIZE; i++)
for (i = 0; i < hw->mac.mcft_size; i++)
IXGBE_WRITE_REG(hw, IXGBE_MTA(i), 0);
/* Add the new addresses */
for (i = 0; i < mc_addr_count; i++) {
hw_dbg(hw, " Adding the multicast addresses:\n");
ixgbe_add_mc_addr(hw, mc_addr_list +
(i * (IXGBE_ETH_LENGTH_OF_ADDRESS + pad)));
ixgbe_add_mc_addr(hw, next(hw, &mc_addr_list, &vmdq));
}
/* Enable mta */
@ -884,11 +985,11 @@ static s32 ixgbe_clear_vfta(struct ixgbe_hw *hw)
u32 offset;
u32 vlanbyte;
for (offset = 0; offset < IXGBE_VLAN_FILTER_TBL_SIZE; offset++)
for (offset = 0; offset < hw->mac.vft_size; offset++)
IXGBE_WRITE_REG(hw, IXGBE_VFTA(offset), 0);
for (vlanbyte = 0; vlanbyte < 4; vlanbyte++)
for (offset = 0; offset < IXGBE_VLAN_FILTER_TBL_SIZE; offset++)
for (offset = 0; offset < hw->mac.vft_size; offset++)
IXGBE_WRITE_REG(hw, IXGBE_VFTAVIND(vlanbyte, offset),
0);

View File

@ -47,7 +47,9 @@ s32 ixgbe_validate_eeprom_checksum(struct ixgbe_hw *hw, u16 *checksum_val);
s32 ixgbe_set_rar(struct ixgbe_hw *hw, u32 index, u8 *addr, u32 vind,
u32 enable_addr);
s32 ixgbe_update_mc_addr_list(struct ixgbe_hw *hw, u8 *mc_addr_list,
u32 mc_addr_count, u32 pad);
u32 mc_addr_count, ixgbe_mc_addr_itr next);
s32 ixgbe_update_uc_addr_list(struct ixgbe_hw *hw, u8 *uc_addr_list,
u32 mc_addr_count, ixgbe_mc_addr_itr next);
s32 ixgbe_set_vfta(struct ixgbe_hw *hw, u32 vlan, u32 vind, bool vlan_on);
s32 ixgbe_validate_mac_addr(u8 *mac_addr);

View File

@ -1619,23 +1619,37 @@ static void ixgbe_restore_vlan(struct ixgbe_adapter *adapter)
}
}
static u8 *ixgbe_addr_list_itr(struct ixgbe_hw *hw, u8 **mc_addr_ptr, u32 *vmdq)
{
struct dev_mc_list *mc_ptr;
u8 *addr = *mc_addr_ptr;
*vmdq = 0;
mc_ptr = container_of(addr, struct dev_mc_list, dmi_addr[0]);
if (mc_ptr->next)
*mc_addr_ptr = mc_ptr->next->dmi_addr;
else
*mc_addr_ptr = NULL;
return addr;
}
/**
* ixgbe_set_multi - Multicast and Promiscuous mode set
* ixgbe_set_rx_mode - Unicast, Multicast and Promiscuous mode set
* @netdev: network interface device structure
*
* The set_multi entry point is called whenever the multicast address
* list or the network interface flags are updated. This routine is
* responsible for configuring the hardware for proper multicast,
* promiscuous mode, and all-multi behavior.
* The set_rx_method entry point is called whenever the unicast/multicast
* address list or the network interface flags are updated. This routine is
* responsible for configuring the hardware for proper unicast, multicast and
* promiscuous mode.
**/
static void ixgbe_set_multi(struct net_device *netdev)
static void ixgbe_set_rx_mode(struct net_device *netdev)
{
struct ixgbe_adapter *adapter = netdev_priv(netdev);
struct ixgbe_hw *hw = &adapter->hw;
struct dev_mc_list *mc_ptr;
u8 *mta_list;
u32 fctrl, vlnctrl;
int i;
u8 *addr_list = NULL;
int addr_count = 0;
/* Check for Promiscuous and All Multicast modes */
@ -1643,6 +1657,7 @@ static void ixgbe_set_multi(struct net_device *netdev)
vlnctrl = IXGBE_READ_REG(hw, IXGBE_VLNCTRL);
if (netdev->flags & IFF_PROMISC) {
hw->addr_ctrl.user_set_promisc = 1;
fctrl |= (IXGBE_FCTRL_UPE | IXGBE_FCTRL_MPE);
vlnctrl &= ~IXGBE_VLNCTRL_VFE;
} else {
@ -1653,33 +1668,25 @@ static void ixgbe_set_multi(struct net_device *netdev)
fctrl &= ~(IXGBE_FCTRL_UPE | IXGBE_FCTRL_MPE);
}
vlnctrl |= IXGBE_VLNCTRL_VFE;
hw->addr_ctrl.user_set_promisc = 0;
}
IXGBE_WRITE_REG(hw, IXGBE_FCTRL, fctrl);
IXGBE_WRITE_REG(hw, IXGBE_VLNCTRL, vlnctrl);
if (netdev->mc_count) {
mta_list = kcalloc(netdev->mc_count, ETH_ALEN, GFP_ATOMIC);
if (!mta_list)
return;
/* Shared function expects packed array of only addresses. */
mc_ptr = netdev->mc_list;
for (i = 0; i < netdev->mc_count; i++) {
if (!mc_ptr)
break;
memcpy(mta_list + (i * ETH_ALEN), mc_ptr->dmi_addr,
ETH_ALEN);
mc_ptr = mc_ptr->next;
}
ixgbe_update_mc_addr_list(hw, mta_list, i, 0);
kfree(mta_list);
} else {
ixgbe_update_mc_addr_list(hw, NULL, 0, 0);
}
/* reprogram secondary unicast list */
addr_count = netdev->uc_count;
if (addr_count)
addr_list = netdev->uc_list->dmi_addr;
ixgbe_update_uc_addr_list(hw, addr_list, addr_count,
ixgbe_addr_list_itr);
/* reprogram multicast list */
addr_count = netdev->mc_count;
if (addr_count)
addr_list = netdev->mc_list->dmi_addr;
ixgbe_update_mc_addr_list(hw, addr_list, addr_count,
ixgbe_addr_list_itr);
}
static void ixgbe_napi_enable_all(struct ixgbe_adapter *adapter)
@ -1723,7 +1730,7 @@ static void ixgbe_configure(struct ixgbe_adapter *adapter)
struct net_device *netdev = adapter->netdev;
int i;
ixgbe_set_multi(netdev);
ixgbe_set_rx_mode(netdev);
ixgbe_restore_vlan(adapter);
@ -3508,7 +3515,8 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
netdev->stop = &ixgbe_close;
netdev->hard_start_xmit = &ixgbe_xmit_frame;
netdev->get_stats = &ixgbe_get_stats;
netdev->set_multicast_list = &ixgbe_set_multi;
netdev->set_rx_mode = &ixgbe_set_rx_mode;
netdev->set_multicast_list = &ixgbe_set_rx_mode;
netdev->set_mac_address = &ixgbe_set_mac;
netdev->change_mtu = &ixgbe_change_mtu;
ixgbe_set_ethtool_ops(netdev);

View File

@ -822,10 +822,6 @@
#define IXGBE_RAH_VIND_SHIFT 18
#define IXGBE_RAH_AV 0x80000000
/* Filters */
#define IXGBE_MC_TBL_SIZE 128 /* Multicast Filter Table (4096 bits) */
#define IXGBE_VLAN_FILTER_TBL_SIZE 128 /* VLAN Filter Table (4096 bits) */
/* Header split receive */
#define IXGBE_RFCTL_ISCSI_DIS 0x00000001
#define IXGBE_RFCTL_ISCSI_DWC_MASK 0x0000003E
@ -1167,6 +1163,8 @@ struct ixgbe_addr_filter_info {
u32 rar_used_count;
u32 mc_addr_in_rar_count;
u32 mta_in_use;
u32 overflow_promisc;
bool user_set_promisc;
};
/* Flow control parameters */
@ -1242,6 +1240,10 @@ struct ixgbe_hw_stats {
/* forward declaration */
struct ixgbe_hw;
/* iterator type for walking multicast address lists */
typedef u8* (*ixgbe_mc_addr_itr) (struct ixgbe_hw *hw, u8 **mc_addr_ptr,
u32 *vmdq);
struct ixgbe_mac_operations {
s32 (*reset)(struct ixgbe_hw *);
enum ixgbe_media_type (*get_media_type)(struct ixgbe_hw *);
@ -1263,9 +1265,11 @@ struct ixgbe_mac_info {
u8 addr[IXGBE_ETH_LENGTH_OF_ADDRESS];
u8 perm_addr[IXGBE_ETH_LENGTH_OF_ADDRESS];
s32 mc_filter_type;
u32 mcft_size;
u32 vft_size;
u32 num_rar_entries;
u32 num_rx_queues;
u32 num_tx_queues;
u32 num_rx_addrs;
u32 link_attach_type;
u32 link_mode_select;
bool link_settings_loaded;