ALSA: hda - remove controller dependency on i915 power well for Baytrail/Braswell

For Baytrail (Valleyview) and Braswell (Cherryview), only the HDMI codec is
in the display power well while the HD-A controller isn't. So the controller
flag 'need_i915_power' is not set to release the display power after probe,
and the codec flag 'link_power_control" is set to request/release the display
power via bus link_power ops.

Signed-off-by: Mengdong Lin <mengdong.lin@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This commit is contained in:
Mengdong Lin 2015-04-29 17:43:43 +08:00 committed by Takashi Iwai
parent 795614dde4
commit 2bd1f73f42
2 changed files with 13 additions and 2 deletions

View File

@ -1900,8 +1900,10 @@ static int azx_probe_continue(struct azx *chip)
* display codec needs the power and it can be released after probe.
*/
if (chip->driver_caps & AZX_DCAPS_I915_POWERWELL) {
/* Assume the controller needs the power by default */
hda->need_i915_power = 1;
/* Baytral/Braswell controllers don't need this power */
if (pci->device != 0x0f04 && pci->device != 0x2284)
hda->need_i915_power = 1;
#ifdef CONFIG_SND_HDA_I915
err = hda_i915_init(hda);

View File

@ -2335,6 +2335,15 @@ static int patch_generic_hdmi(struct hda_codec *codec)
intel_haswell_fixup_enable_dp12(codec);
}
/* For Valleyview/Cherryview, only the display codec is in the display
* power well and can use link_power ops to request/release the power.
* For Haswell/Broadwell, the controller is also in the power well and
* can cover the codec power request, and so need not set this flag.
* For previous platforms, there is no such power well feature.
*/
if (is_valleyview_plus(codec))
codec->core.link_power_control = 1;
if (is_haswell_plus(codec) || is_valleyview_plus(codec))
codec->depop_delay = 0;