ARM: dts: am335x-bone*: add DT for BeagleBone Black
The BeagleBone Black is basically a regular BeagleBone with eMMC and HDMI added, so create a common dtsi both can use. IMPORTANT: booting the existing am335x-bone.dts will blow up the HDMI transceiver after a dozen boots with an uSD card inserted because LDO will be at 3.3V instead of 1.8. MMC support for AM335x still isn't in, so only the LDO change has been added. Signed-off-by: Koen Kooi <koen@dominion.thruhere.net> Tested-by: Tom Rini <trini@ti.com> Tested-by: Matt Porter <matt.porter@linaro.org> Acked-by: Kevin Hilman <khilman@linaro.org> Tested-by: Kevin Hilman <khilman@linaro.org> Tested-by: Joel Fernandes <joelf@ti.com> Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
This commit is contained in:
Koen Kooi
Benoit Cousson
parent
b11247637f
commit
2ba3549352
|
|
@ -183,6 +183,7 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \
|
|||
am335x-evm.dtb \
|
||||
am335x-evmsk.dtb \
|
||||
am335x-bone.dtb \
|
||||
am335x-boneblack.dtb \
|
||||
am3517-evm.dtb \
|
||||
am3517_mt_ventoux.dtb \
|
||||
am43x-epos-evm.dtb
|
||||
|
|
|
|||
|
|
@ -0,0 +1,262 @@
|
|||
/*
|
||||
* Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
/ {
|
||||
model = "TI AM335x BeagleBone";
|
||||
compatible = "ti,am335x-bone", "ti,am33xx";
|
||||
|
||||
cpus {
|
||||
cpu@0 {
|
||||
cpu0-supply = <&dcdc2_reg>;
|
||||
};
|
||||
};
|
||||
|
||||
memory {
|
||||
device_type = "memory";
|
||||
reg = <0x80000000 0x10000000>; /* 256 MB */
|
||||
};
|
||||
|
||||
am33xx_pinmux: pinmux@44e10800 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&clkout2_pin>;
|
||||
|
||||
user_leds_s0: user_leds_s0 {
|
||||
pinctrl-single,pins = <
|
||||
0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a5.gpio1_21 */
|
||||
0x58 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a6.gpio1_22 */
|
||||
0x5c (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a7.gpio1_23 */
|
||||
0x60 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a8.gpio1_24 */
|
||||
>;
|
||||
};
|
||||
|
||||
i2c0_pins: pinmux_i2c0_pins {
|
||||
pinctrl-single,pins = <
|
||||
0x188 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */
|
||||
0x18c (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */
|
||||
>;
|
||||
};
|
||||
|
||||
uart0_pins: pinmux_uart0_pins {
|
||||
pinctrl-single,pins = <
|
||||
0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */
|
||||
0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */
|
||||
>;
|
||||
};
|
||||
|
||||
clkout2_pin: pinmux_clkout2_pin {
|
||||
pinctrl-single,pins = <
|
||||
0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr1.clkout2 */
|
||||
>;
|
||||
};
|
||||
|
||||
cpsw_default: cpsw_default {
|
||||
pinctrl-single,pins = <
|
||||
/* Slave 1 */
|
||||
0x110 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxerr.mii1_rxerr */
|
||||
0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txen.mii1_txen */
|
||||
0x118 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxdv.mii1_rxdv */
|
||||
0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd3.mii1_txd3 */
|
||||
0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd2.mii1_txd2 */
|
||||
0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd1.mii1_txd1 */
|
||||
0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd0.mii1_txd0 */
|
||||
0x12c (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_txclk.mii1_txclk */
|
||||
0x130 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxclk.mii1_rxclk */
|
||||
0x134 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd3.mii1_rxd3 */
|
||||
0x138 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd2.mii1_rxd2 */
|
||||
0x13c (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd1.mii1_rxd1 */
|
||||
0x140 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd0.mii1_rxd0 */
|
||||
>;
|
||||
};
|
||||
|
||||
cpsw_sleep: cpsw_sleep {
|
||||
pinctrl-single,pins = <
|
||||
/* Slave 1 reset value */
|
||||
0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7)
|
||||
0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
|
||||
0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
|
||||
0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7)
|
||||
0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7)
|
||||
0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
|
||||
0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
|
||||
0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7)
|
||||
0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7)
|
||||
0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7)
|
||||
0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7)
|
||||
0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
|
||||
0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
|
||||
>;
|
||||
};
|
||||
|
||||
davinci_mdio_default: davinci_mdio_default {
|
||||
pinctrl-single,pins = <
|
||||
/* MDIO */
|
||||
0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */
|
||||
0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */
|
||||
>;
|
||||
};
|
||||
|
||||
davinci_mdio_sleep: davinci_mdio_sleep {
|
||||
pinctrl-single,pins = <
|
||||
/* MDIO reset value */
|
||||
0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
|
||||
0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
ocp {
|
||||
uart0: serial@44e09000 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart0_pins>;
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
musb: usb@47400000 {
|
||||
status = "okay";
|
||||
|
||||
control@44e10000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
usb-phy@47401300 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
usb-phy@47401b00 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
usb@47401000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
usb@47401800 {
|
||||
status = "okay";
|
||||
dr_mode = "host";
|
||||
};
|
||||
|
||||
dma-controller@07402000 {
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
i2c0: i2c@44e0b000 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c0_pins>;
|
||||
|
||||
status = "okay";
|
||||
clock-frequency = <400000>;
|
||||
|
||||
tps: tps@24 {
|
||||
reg = <0x24>;
|
||||
};
|
||||
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&user_leds_s0>;
|
||||
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led@2 {
|
||||
label = "beaglebone:green:heartbeat";
|
||||
gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "heartbeat";
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
led@3 {
|
||||
label = "beaglebone:green:mmc0";
|
||||
gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "mmc0";
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
led@4 {
|
||||
label = "beaglebone:green:usr2";
|
||||
gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
led@5 {
|
||||
label = "beaglebone:green:usr3";
|
||||
gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
|
||||
default-state = "off";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
/include/ "tps65217.dtsi"
|
||||
|
||||
&tps {
|
||||
regulators {
|
||||
dcdc1_reg: regulator@0 {
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
dcdc2_reg: regulator@1 {
|
||||
/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
|
||||
regulator-name = "vdd_mpu";
|
||||
regulator-min-microvolt = <925000>;
|
||||
regulator-max-microvolt = <1325000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
dcdc3_reg: regulator@2 {
|
||||
/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
|
||||
regulator-name = "vdd_core";
|
||||
regulator-min-microvolt = <925000>;
|
||||
regulator-max-microvolt = <1150000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
ldo1_reg: regulator@3 {
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
ldo2_reg: regulator@4 {
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
ldo3_reg: regulator@5 {
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
ldo4_reg: regulator@6 {
|
||||
regulator-always-on;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&cpsw_emac0 {
|
||||
phy_id = <&davinci_mdio>, <0>;
|
||||
phy-mode = "mii";
|
||||
};
|
||||
|
||||
&cpsw_emac1 {
|
||||
phy_id = <&davinci_mdio>, <1>;
|
||||
phy-mode = "mii";
|
||||
};
|
||||
|
||||
&mac {
|
||||
pinctrl-names = "default", "sleep";
|
||||
pinctrl-0 = <&cpsw_default>;
|
||||
pinctrl-1 = <&cpsw_sleep>;
|
||||
|
||||
};
|
||||
|
||||
&davinci_mdio {
|
||||
pinctrl-names = "default", "sleep";
|
||||
pinctrl-0 = <&davinci_mdio_default>;
|
||||
pinctrl-1 = <&davinci_mdio_sleep>;
|
||||
};
|
||||
|
|
@ -8,258 +8,4 @@
|
|||
/dts-v1/;
|
||||
|
||||
#include "am33xx.dtsi"
|
||||
|
||||
/ {
|
||||
model = "TI AM335x BeagleBone";
|
||||
compatible = "ti,am335x-bone", "ti,am33xx";
|
||||
|
||||
cpus {
|
||||
cpu@0 {
|
||||
cpu0-supply = <&dcdc2_reg>;
|
||||
};
|
||||
};
|
||||
|
||||
memory {
|
||||
device_type = "memory";
|
||||
reg = <0x80000000 0x10000000>; /* 256 MB */
|
||||
};
|
||||
|
||||
am33xx_pinmux: pinmux@44e10800 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&clkout2_pin>;
|
||||
|
||||
user_leds_s0: user_leds_s0 {
|
||||
pinctrl-single,pins = <
|
||||
0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a5.gpio1_21 */
|
||||
0x58 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a6.gpio1_22 */
|
||||
0x5c (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a7.gpio1_23 */
|
||||
0x60 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a8.gpio1_24 */
|
||||
>;
|
||||
};
|
||||
|
||||
i2c0_pins: pinmux_i2c0_pins {
|
||||
pinctrl-single,pins = <
|
||||
0x188 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */
|
||||
0x18c (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */
|
||||
>;
|
||||
};
|
||||
|
||||
uart0_pins: pinmux_uart0_pins {
|
||||
pinctrl-single,pins = <
|
||||
0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */
|
||||
0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */
|
||||
>;
|
||||
};
|
||||
|
||||
clkout2_pin: pinmux_clkout2_pin {
|
||||
pinctrl-single,pins = <
|
||||
0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr1.clkout2 */
|
||||
>;
|
||||
};
|
||||
|
||||
cpsw_default: cpsw_default {
|
||||
pinctrl-single,pins = <
|
||||
/* Slave 1 */
|
||||
0x110 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxerr.mii1_rxerr */
|
||||
0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txen.mii1_txen */
|
||||
0x118 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxdv.mii1_rxdv */
|
||||
0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd3.mii1_txd3 */
|
||||
0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd2.mii1_txd2 */
|
||||
0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd1.mii1_txd1 */
|
||||
0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd0.mii1_txd0 */
|
||||
0x12c (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_txclk.mii1_txclk */
|
||||
0x130 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxclk.mii1_rxclk */
|
||||
0x134 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd3.mii1_rxd3 */
|
||||
0x138 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd2.mii1_rxd2 */
|
||||
0x13c (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd1.mii1_rxd1 */
|
||||
0x140 (PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd0.mii1_rxd0 */
|
||||
>;
|
||||
};
|
||||
|
||||
cpsw_sleep: cpsw_sleep {
|
||||
pinctrl-single,pins = <
|
||||
/* Slave 1 reset value */
|
||||
0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7)
|
||||
0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
|
||||
0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
|
||||
0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7)
|
||||
0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7)
|
||||
0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
|
||||
0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
|
||||
0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7)
|
||||
0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7)
|
||||
0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7)
|
||||
0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7)
|
||||
0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
|
||||
0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
|
||||
>;
|
||||
};
|
||||
|
||||
davinci_mdio_default: davinci_mdio_default {
|
||||
pinctrl-single,pins = <
|
||||
/* MDIO */
|
||||
0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */
|
||||
0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */
|
||||
>;
|
||||
};
|
||||
|
||||
davinci_mdio_sleep: davinci_mdio_sleep {
|
||||
pinctrl-single,pins = <
|
||||
/* MDIO reset value */
|
||||
0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
|
||||
0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
ocp {
|
||||
uart0: serial@44e09000 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart0_pins>;
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
musb: usb@47400000 {
|
||||
status = "okay";
|
||||
|
||||
control@44e10000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
usb-phy@47401300 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
usb-phy@47401b00 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
usb@47401000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
usb@47401800 {
|
||||
status = "okay";
|
||||
dr_mode = "host";
|
||||
};
|
||||
|
||||
dma-controller@07402000 {
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
i2c0: i2c@44e0b000 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c0_pins>;
|
||||
|
||||
status = "okay";
|
||||
clock-frequency = <400000>;
|
||||
|
||||
tps: tps@24 {
|
||||
reg = <0x24>;
|
||||
};
|
||||
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&user_leds_s0>;
|
||||
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led@2 {
|
||||
label = "beaglebone:green:heartbeat";
|
||||
gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "heartbeat";
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
led@3 {
|
||||
label = "beaglebone:green:mmc0";
|
||||
gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "mmc0";
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
led@4 {
|
||||
label = "beaglebone:green:usr2";
|
||||
gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
led@5 {
|
||||
label = "beaglebone:green:usr3";
|
||||
gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
|
||||
default-state = "off";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
/include/ "tps65217.dtsi"
|
||||
|
||||
&tps {
|
||||
regulators {
|
||||
dcdc1_reg: regulator@0 {
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
dcdc2_reg: regulator@1 {
|
||||
/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
|
||||
regulator-name = "vdd_mpu";
|
||||
regulator-min-microvolt = <925000>;
|
||||
regulator-max-microvolt = <1325000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
dcdc3_reg: regulator@2 {
|
||||
/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
|
||||
regulator-name = "vdd_core";
|
||||
regulator-min-microvolt = <925000>;
|
||||
regulator-max-microvolt = <1150000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
ldo1_reg: regulator@3 {
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
ldo2_reg: regulator@4 {
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
ldo3_reg: regulator@5 {
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
ldo4_reg: regulator@6 {
|
||||
regulator-always-on;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&cpsw_emac0 {
|
||||
phy_id = <&davinci_mdio>, <0>;
|
||||
phy-mode = "mii";
|
||||
};
|
||||
|
||||
&cpsw_emac1 {
|
||||
phy_id = <&davinci_mdio>, <1>;
|
||||
phy-mode = "mii";
|
||||
};
|
||||
|
||||
&mac {
|
||||
pinctrl-names = "default", "sleep";
|
||||
pinctrl-0 = <&cpsw_default>;
|
||||
pinctrl-1 = <&cpsw_sleep>;
|
||||
|
||||
};
|
||||
|
||||
&davinci_mdio {
|
||||
pinctrl-names = "default", "sleep";
|
||||
pinctrl-0 = <&davinci_mdio_default>;
|
||||
pinctrl-1 = <&davinci_mdio_sleep>;
|
||||
};
|
||||
#include "am335x-bone-common.dtsi"
|
||||
|
|
|
|||
|
|
@ -0,0 +1,17 @@
|
|||
/*
|
||||
* Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*/
|
||||
/dts-v1/;
|
||||
|
||||
#include "am33xx.dtsi"
|
||||
#include "am335x-bone-common.dtsi"
|
||||
|
||||
&ldo3_reg {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
Loading…
Reference in New Issue