ARM/dmaengine: edma: Merge the two drivers under drivers/dma/

Move the code out from arch/arm/common and merge it inside of the dmaengine
driver.
This change is done with as minimal (if eny) functional change to the code
as possible to avoid introducing regression.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
This commit is contained in:
Peter Ujfalusi 2015-10-14 14:42:53 +03:00 committed by Vinod Koul
parent cef5b0da40
commit 2b6b3b7420
8 changed files with 1431 additions and 1587 deletions

View File

@ -736,7 +736,6 @@ config ARCH_DAVINCI
select GENERIC_CLOCKEVENTS select GENERIC_CLOCKEVENTS
select GENERIC_IRQ_CHIP select GENERIC_IRQ_CHIP
select HAVE_IDE select HAVE_IDE
select TI_PRIV_EDMA
select USE_OF select USE_OF
select ZONE_DMA select ZONE_DMA
help help

View File

@ -17,6 +17,3 @@ config SHARP_PARAM
config SHARP_SCOOP config SHARP_SCOOP
bool bool
config TI_PRIV_EDMA
bool

View File

@ -15,6 +15,5 @@ obj-$(CONFIG_MCPM) += mcpm_head.o mcpm_entry.o mcpm_platsmp.o vlock.o
CFLAGS_REMOVE_mcpm_entry.o = -pg CFLAGS_REMOVE_mcpm_entry.o = -pg
AFLAGS_mcpm_head.o := -march=armv7-a AFLAGS_mcpm_head.o := -march=armv7-a
AFLAGS_vlock.o := -march=armv7-a AFLAGS_vlock.o := -march=armv7-a
obj-$(CONFIG_TI_PRIV_EDMA) += edma.o
obj-$(CONFIG_BL_SWITCHER) += bL_switcher.o obj-$(CONFIG_BL_SWITCHER) += bL_switcher.o
obj-$(CONFIG_BL_SWITCHER_DUMMY_IF) += bL_switcher_dummy_if.o obj-$(CONFIG_BL_SWITCHER_DUMMY_IF) += bL_switcher_dummy_if.o

File diff suppressed because it is too large Load Diff

View File

@ -90,7 +90,6 @@ config ARCH_OMAP2PLUS
select OMAP_GPMC select OMAP_GPMC
select PINCTRL select PINCTRL
select SOC_BUS select SOC_BUS
select TI_PRIV_EDMA
select OMAP_IRQCHIP select OMAP_IRQCHIP
help help
Systems based on OMAP2, OMAP3, OMAP4 or OMAP5 Systems based on OMAP2, OMAP3, OMAP4 or OMAP5

View File

@ -486,7 +486,6 @@ config TI_EDMA
depends on ARCH_DAVINCI || ARCH_OMAP || ARCH_KEYSTONE depends on ARCH_DAVINCI || ARCH_OMAP || ARCH_KEYSTONE
select DMA_ENGINE select DMA_ENGINE
select DMA_VIRTUAL_CHANNELS select DMA_VIRTUAL_CHANNELS
select TI_PRIV_EDMA
default n default n
help help
Enable support for the TI EDMA controller. This DMA Enable support for the TI EDMA controller. This DMA

File diff suppressed because it is too large Load Diff

View File

@ -41,37 +41,6 @@
#ifndef EDMA_H_ #ifndef EDMA_H_
#define EDMA_H_ #define EDMA_H_
/* PaRAM slots are laid out like this */
struct edmacc_param {
u32 opt;
u32 src;
u32 a_b_cnt;
u32 dst;
u32 src_dst_bidx;
u32 link_bcntrld;
u32 src_dst_cidx;
u32 ccnt;
} __packed;
/* fields in edmacc_param.opt */
#define SAM BIT(0)
#define DAM BIT(1)
#define SYNCDIM BIT(2)
#define STATIC BIT(3)
#define EDMA_FWID (0x07 << 8)
#define TCCMODE BIT(11)
#define EDMA_TCC(t) ((t) << 12)
#define TCINTEN BIT(20)
#define ITCINTEN BIT(21)
#define TCCHEN BIT(22)
#define ITCCHEN BIT(23)
/*ch_status paramater of callback function possible values*/
#define EDMA_DMA_COMPLETE 1
#define EDMA_DMA_CC_ERROR 2
#define EDMA_DMA_TC1_ERROR 3
#define EDMA_DMA_TC2_ERROR 4
enum dma_event_q { enum dma_event_q {
EVENTQ_0 = 0, EVENTQ_0 = 0,
EVENTQ_1 = 1, EVENTQ_1 = 1,
@ -84,49 +53,6 @@ enum dma_event_q {
#define EDMA_CTLR(i) ((i) >> 16) #define EDMA_CTLR(i) ((i) >> 16)
#define EDMA_CHAN_SLOT(i) ((i) & 0xffff) #define EDMA_CHAN_SLOT(i) ((i) & 0xffff)
#define EDMA_CHANNEL_ANY -1 /* for edma_alloc_channel() */
#define EDMA_SLOT_ANY -1 /* for edma_alloc_slot() */
#define EDMA_CONT_PARAMS_ANY 1001
#define EDMA_CONT_PARAMS_FIXED_EXACT 1002
#define EDMA_CONT_PARAMS_FIXED_NOT_EXACT 1003
#define EDMA_MAX_CC 2
struct edma;
struct edma *edma_get_data(struct device *edma_dev);
/* alloc/free DMA channels and their dedicated parameter RAM slots */
int edma_alloc_channel(struct edma *cc, int channel,
void (*callback)(unsigned channel, u16 ch_status, void *data),
void *data, enum dma_event_q);
void edma_free_channel(struct edma *cc, unsigned channel);
/* alloc/free parameter RAM slots */
int edma_alloc_slot(struct edma *cc, int slot);
void edma_free_slot(struct edma *cc, unsigned slot);
/* calls that operate on part of a parameter RAM slot */
dma_addr_t edma_get_position(struct edma *cc, unsigned slot, bool dst);
void edma_link(struct edma *cc, unsigned from, unsigned to);
/* calls that operate on an entire parameter RAM slot */
void edma_write_slot(struct edma *cc, unsigned slot,
const struct edmacc_param *params);
void edma_read_slot(struct edma *cc, unsigned slot,
struct edmacc_param *params);
/* channel control operations */
int edma_start(struct edma *cc, unsigned channel);
void edma_stop(struct edma *cc, unsigned channel);
void edma_clean_channel(struct edma *cc, unsigned channel);
void edma_pause(struct edma *cc, unsigned channel);
void edma_resume(struct edma *cc, unsigned channel);
int edma_trigger_channel(struct edma *cc, unsigned channel);
void edma_assign_channel_eventq(struct edma *cc, unsigned channel,
enum dma_event_q eventq_no);
struct edma_rsv_info { struct edma_rsv_info {
const s16 (*rsv_chans)[2]; const s16 (*rsv_chans)[2];