hollalinux
/
linux-sg2042
mirror of https://github.com/sophgo/linux-riscv.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

atl1: header file cleanup 

Remove unused structure members, improve comments, break long comment lines,
rename a constant to be consistent with others in the file.

Signed-off-by: Jay Cliburn <jacliburn@bellsouth.net>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
This commit is contained in:
Jay Cliburn 2007-07-15 11:03:26 -05:00 committed by Jeff Garzik
parent 70d9d4b247
commit 2b116145bb
2 changed files with 90 additions and 85 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

155
drivers/net/atl1/atl1.h
View File

@ -43,6 +43,7 @@ extern const struct ethtool_ops atl1_ethtool_ops;
struct atl1_adapter;
#define ATL1_MAX_INTR 3
#define ATL1_MAX_TX_BUF_LEN 0x3000 /* 12288 bytes */
#define ATL1_DEFAULT_TPD 256
#define ATL1_MAX_TPD 1024
@ -57,29 +58,45 @@ struct atl1_adapter;
#define ATL1_RRD_DESC(R, i) ATL1_GET_DESC(R, i, struct rx_return_desc)
/*
* This detached comment is preserved for documentation purposes only.
* It was originally attached to some code that got deleted, but seems
* important enough to keep around...
*
* <begin detached comment>
* Some workarounds require millisecond delays and are run during interrupt
* context. Most notably, when establishing link, the phy may need tweaking
* but cannot process phy register reads/writes faster than millisecond
* intervals...and we establish link due to a "link status change" interrupt.
* <end detached comment>
*/
/*
* wrapper around a pointer to a socket buffer,
* so a DMA handle can be stored along with the buffer
* atl1_ring_header represents a single, contiguous block of DMA space
* mapped for the three descriptor rings (tpd, rfd, rrd) and the two
* message blocks (cmb, smb) described below
*/
struct atl1_ring_header {
void *desc; /* virtual address */
dma_addr_t dma; /* physical address*/
unsigned int size; /* length in bytes */
};
/*
* atl1_buffer is wrapper around a pointer to a socket buffer
* so a DMA handle can be stored along with the skb
*/
struct atl1_buffer {
struct sk_buff *skb;
u16 length;
u16 alloced;
struct sk_buff *skb; /* socket buffer */
u16 length; /* rx buffer length */
u16 alloced; /* 1 if skb allocated */
dma_addr_t dma;
};
#define MAX_TX_BUF_LEN 0x3000 /* 12KB */
/* transmit packet descriptor (tpd) ring */
struct atl1_tpd_ring {
void *desc; /* pointer to the descriptor ring memory */
dma_addr_t dma; /* physical adress of the descriptor ring */
u16 size; /* length of descriptor ring in bytes */
void *desc; /* descriptor ring virtual address */
dma_addr_t dma; /* descriptor ring physical address */
u16 size; /* descriptor ring length in bytes */
u16 count; /* number of descriptors in the ring */
u16 hw_idx; /* hardware index */
atomic_t next_to_clean;
@ -87,36 +104,34 @@ struct atl1_tpd_ring {
struct atl1_buffer *buffer_info;
};
/* receive free descriptor (rfd) ring */
struct atl1_rfd_ring {
void *desc;
dma_addr_t dma;
u16 size;
u16 count;
void *desc; /* descriptor ring virtual address */
dma_addr_t dma; /* descriptor ring physical address */
u16 size; /* descriptor ring length in bytes */
u16 count; /* number of descriptors in the ring */
atomic_t next_to_use;
u16 next_to_clean;
struct atl1_buffer *buffer_info;
};
/* receive return descriptor (rrd) ring */
struct atl1_rrd_ring {
void *desc;
dma_addr_t dma;
unsigned int size;
u16 count;
void *desc; /* descriptor ring virtual address */
dma_addr_t dma; /* descriptor ring physical address */
unsigned int size; /* descriptor ring length in bytes */
u16 count; /* number of descriptors in the ring */
u16 next_to_use;
atomic_t next_to_clean;
};
struct atl1_ring_header {
void *desc; /* pointer to the descriptor ring memory */
dma_addr_t dma; /* physical adress of the descriptor ring */
unsigned int size; /* length of descriptor ring in bytes */
};
/* coalescing message block (cmb) */
struct atl1_cmb {
struct coals_msg_block *cmb;
dma_addr_t dma;
};
/* statistics message block (smb) */
struct atl1_smb {
struct stats_msg_block *smb;
dma_addr_t dma;
@ -141,24 +156,26 @@ struct atl1_sft_stats {
u64 tx_aborted_errors;
u64 tx_window_errors;
u64 tx_carrier_errors;
u64 tx_pause; /* num Pause packet transmitted. */
u64 excecol; /* num tx packets aborted due to excessive collisions. */
u64 deffer; /* num deferred tx packets */
u64 scc; /* num packets subsequently transmitted successfully w/ single prior collision. */
u64 mcc; /* num packets subsequently transmitted successfully w/ multiple prior collisions. */
u64 tx_pause; /* num pause packets transmitted. */
u64 excecol; /* num tx packets w/ excessive collisions. */
u64 deffer; /* num tx packets deferred */
u64 scc; /* num packets subsequently transmitted
* successfully w/ single prior collision. */
u64 mcc; /* num packets subsequently transmitted
* successfully w/ multiple prior collisions. */
u64 latecol; /* num tx packets w/ late collisions. */
u64 tx_underun; /* num tx packets aborted due to transmit FIFO underrun, or TRD FIFO underrun */
u64 tx_trunc; /* num tx packets truncated due to size exceeding MTU, regardless whether truncated by Selene or not. (The name doesn't really reflect the meaning in this case.) */
u64 tx_underun; /* num tx packets aborted due to transmit
* FIFO underrun, or TRD FIFO underrun */
u64 tx_trunc; /* num tx packets truncated due to size
* exceeding MTU, regardless whether truncated
* by the chip or not. (The name doesn't really
* reflect the meaning in this case.) */
u64 rx_pause; /* num Pause packets received. */
u64 rx_rrd_ov;
u64 rx_trunc;
};
/* board specific private data structure */
#define ATL1_REGS_LEN 8
/* Structure containing variables used by the shared code */
/* hardware structure */
struct atl1_hw {
u8 __iomem *hw_addr;
struct atl1_adapter *back;
@ -167,24 +184,35 @@ struct atl1_hw {
enum atl1_dma_req_block dmar_block;
enum atl1_dma_req_block dmaw_block;
u8 preamble_len;
u8 max_retry; /* Retransmission maximum, after which the packet will be discarded */
u8 jam_ipg; /* IPG to start JAM for collision based flow control in half-duplex mode. In units of 8-bit time */
u8 ipgt; /* Desired back to back inter-packet gap. The default is 96-bit time */
u8 min_ifg; /* Minimum number of IFG to enforce in between RX frames. Frame gap below such IFP is dropped */
u8 max_retry; /* Retransmission maximum, after which the
* packet will be discarded */
u8 jam_ipg; /* IPG to start JAM for collision based flow
* control in half-duplex mode. In units of
* 8-bit time */
u8 ipgt; /* Desired back to back inter-packet gap.
* The default is 96-bit time */
u8 min_ifg; /* Minimum number of IFG to enforce in between
* receive frames. Frame gap below such IFP
* is dropped */
u8 ipgr1; /* 64bit Carrier-Sense window */
u8 ipgr2; /* 96-bit IPG window */
u8 tpd_burst; /* Number of TPD to prefetch in cache-aligned burst. Each TPD is 16 bytes long */
u8 rfd_burst; /* Number of RFD to prefetch in cache-aligned burst. Each RFD is 12 bytes long */
u8 tpd_burst; /* Number of TPD to prefetch in cache-aligned
* burst. Each TPD is 16 bytes long */
u8 rfd_burst; /* Number of RFD to prefetch in cache-aligned
* burst. Each RFD is 12 bytes long */
u8 rfd_fetch_gap;
u8 rrd_burst; /* Threshold number of RRDs that can be retired in a burst. Each RRD is 16 bytes long */
u8 rrd_burst; /* Threshold number of RRDs that can be retired
* in a burst. Each RRD is 16 bytes long */
u8 tpd_fetch_th;
u8 tpd_fetch_gap;
u16 tx_jumbo_task_th;
u16 txf_burst; /* Number of data bytes to read in a cache-aligned burst. Each SRAM entry is
8 bytes long */
u16 rx_jumbo_th; /* Jumbo packet size for non-VLAN packet. VLAN packets should add 4 bytes */
u16 txf_burst; /* Number of data bytes to read in a cache-
* aligned burst. Each SRAM entry is 8 bytes */
u16 rx_jumbo_th; /* Jumbo packet size for non-VLAN packet. VLAN
* packets should add 4 bytes */
u16 rx_jumbo_lkah;
u16 rrd_ret_timer; /* RRD retirement timer. Decrement by 1 after every 512ns passes. */
u16 rrd_ret_timer; /* RRD retirement timer. Decrement by 1 after
* every 512ns passes. */
u16 lcol; /* Collision Window */
u16 cmb_tpd;
@ -194,20 +222,12 @@ struct atl1_hw {
u32 smb_timer;
u16 media_type;
u16 autoneg_advertised;
u16 pci_cmd_word;
u16 mii_autoneg_adv_reg;
u16 mii_1000t_ctrl_reg;
u32 mem_rang;
u32 txcw;
u32 max_frame_size;
u32 min_frame_size;
u32 mc_filter_type;
u32 num_mc_addrs;
u32 collision_delta;
u32 tx_packet_delta;
u16 phy_spd_default;
u16 dev_rev;
u8 revision_id;
@ -215,21 +235,17 @@ struct atl1_hw {
/* spi flash */
u8 flash_vendor;
u8 dma_fairness;
u8 mac_addr[ETH_ALEN];
u8 perm_mac_addr[ETH_ALEN];
/* bool phy_preamble_sup; */
bool phy_configured;
};
struct atl1_adapter {
/* OS defined structs */
struct net_device *netdev;
struct pci_dev *pdev;
struct net_device_stats net_stats;
struct atl1_sft_stats soft_stats;
struct vlan_group *vlgrp;
u32 rx_buffer_len;
u32 wol;
@ -243,9 +259,7 @@ struct atl1_adapter {
struct timer_list phy_config_timer;
bool phy_timer_pending;
bool mac_disabled;
/* All descriptor rings' memory */
/* all descriptor rings' memory */
struct atl1_ring_header ring_header;
/* TX */
@ -258,25 +272,16 @@ struct atl1_adapter {
u64 hw_csum_err;
u64 hw_csum_good;
u32 gorcl;
u64 gorcl_old;
/* Interrupt Moderator timer ( 2us resolution) */
u16 imt;
/* Interrupt Clear timer (2us resolution) */
u16 ict;
/* MII interface info */
struct mii_if_info mii;
u16 imt; /* interrupt moderator timer (2us resolution */
u16 ict; /* interrupt clear timer (2us resolution */
struct mii_if_info mii; /* MII interface info */
/* structs defined in atl1_hw.h */
u32 bd_number; /* board number */
u32 bd_number; /* board number */
bool pci_using_64;
struct atl1_hw hw;
struct atl1_smb smb;
struct atl1_cmb cmb;
u32 pci_state[16];
};
#endif /* _ATL1_H_ */

20
drivers/net/atl1/atl1_main.c
View File

@ -1344,21 +1344,21 @@ static void atl1_tx_map(struct atl1_adapter *adapter,
if (first_buf_len > proto_hdr_len) {
len12 = first_buf_len - proto_hdr_len;
m = (len12 + MAX_TX_BUF_LEN - 1) / MAX_TX_BUF_LEN;
m = (len12 + ATL1_MAX_TX_BUF_LEN - 1) / ATL1_MAX_TX_BUF_LEN;
for (i = 0; i < m; i++) {
buffer_info =
&tpd_ring->buffer_info[tpd_next_to_use];
buffer_info->skb = NULL;
buffer_info->length =
(MAX_TX_BUF_LEN >=
len12) ? MAX_TX_BUF_LEN : len12;
(ATL1_MAX_TX_BUF_LEN >=
len12) ? ATL1_MAX_TX_BUF_LEN : len12;
len12 -= buffer_info->length;
page = virt_to_page(skb->data +
(proto_hdr_len +
i * MAX_TX_BUF_LEN));
i * ATL1_MAX_TX_BUF_LEN));
offset = (unsigned long)(skb->data +
(proto_hdr_len +
i * MAX_TX_BUF_LEN)) &
i * ATL1_MAX_TX_BUF_LEN)) &
~PAGE_MASK;
buffer_info->dma =
pci_map_page(adapter->pdev, page, offset,
@ -1387,18 +1387,18 @@ static void atl1_tx_map(struct atl1_adapter *adapter,
frag = &skb_shinfo(skb)->frags[f];
lenf = frag->size;
m = (lenf + MAX_TX_BUF_LEN - 1) / MAX_TX_BUF_LEN;
m = (lenf + ATL1_MAX_TX_BUF_LEN - 1) / ATL1_MAX_TX_BUF_LEN;
for (i = 0; i < m; i++) {
buffer_info = &tpd_ring->buffer_info[tpd_next_to_use];
if (unlikely(buffer_info->skb))
BUG();
buffer_info->skb = NULL;
buffer_info->length =
(lenf > MAX_TX_BUF_LEN) ? MAX_TX_BUF_LEN : lenf;
(lenf > ATL1_MAX_TX_BUF_LEN) ? ATL1_MAX_TX_BUF_LEN : lenf;
lenf -= buffer_info->length;
buffer_info->dma =
pci_map_page(adapter->pdev, frag->page,
frag->page_offset + i * MAX_TX_BUF_LEN,
frag->page_offset + i * ATL1_MAX_TX_BUF_LEN,
buffer_info->length, PCI_DMA_TODEVICE);
if (++tpd_next_to_use == tpd_ring->count)
@ -1516,7 +1516,7 @@ static int atl1_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
frag_size = skb_shinfo(skb)->frags[f].size;
if (frag_size)
count +=
(frag_size + MAX_TX_BUF_LEN - 1) / MAX_TX_BUF_LEN;
(frag_size + ATL1_MAX_TX_BUF_LEN - 1) / ATL1_MAX_TX_BUF_LEN;
}
/* mss will be nonzero if we're doing segment offload (TSO/GSO) */
@ -1532,7 +1532,7 @@ static int atl1_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
/* need additional TPD ? */
if (proto_hdr_len != len)
count += (len - proto_hdr_len +
MAX_TX_BUF_LEN - 1) / MAX_TX_BUF_LEN;
ATL1_MAX_TX_BUF_LEN - 1) / ATL1_MAX_TX_BUF_LEN;
}
}