powerpc/fsl: Frame Manager Device Tree binding document
The Frame Manager (FMan) combines the Ethernet network interfaces with packet distribution logic to provide intelligent distribution and queuing decisions for incoming traffic at line rate. This binding document describes Freescale's Frame Manager hardware attributes that are used by the Frame Manager driver for its basic initialization and configuration. Signed-off-by: Igal Liberman <Igal.Liberman@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
This commit is contained in:
Igal Liberman
Scott Wood
parent
f3f6743d1b
commit
297d35fd2a
|
|
@ -0,0 +1,529 @@
|
|||
=============================================================================
|
||||
Freescale Frame Manager Device Bindings
|
||||
|
||||
CONTENTS
|
||||
- FMan Node
|
||||
- FMan Port Node
|
||||
- FMan MURAM Node
|
||||
- FMan dTSEC/XGEC/mEMAC Node
|
||||
- FMan IEEE 1588 Node
|
||||
- Example
|
||||
|
||||
=============================================================================
|
||||
FMan Node
|
||||
|
||||
DESCRIPTION
|
||||
|
||||
Due to the fact that the FMan is an aggregation of sub-engines (ports, MACs,
|
||||
etc.) the FMan node will have child nodes for each of them.
|
||||
|
||||
PROPERTIES
|
||||
|
||||
- compatible
|
||||
Usage: required
|
||||
Value type: <stringlist>
|
||||
Definition: Must include "fsl,fman"
|
||||
FMan version can be determined via FM_IP_REV_1 register in the
|
||||
FMan block. The offset is 0xc4 from the beginning of the
|
||||
Frame Processing Manager memory map (0xc3000 from the
|
||||
beginning of the FMan node).
|
||||
|
||||
- cell-index
|
||||
Usage: required
|
||||
Value type: <u32>
|
||||
Definition: Specifies the index of the FMan unit.
|
||||
|
||||
The cell-index value may be used by the SoC, to identify the
|
||||
FMan unit in the SoC memory map. In the table bellow,
|
||||
there's a description of the cell-index use in each SoC:
|
||||
|
||||
- P1023:
|
||||
register[bit] FMan unit cell-index
|
||||
============================================================
|
||||
DEVDISR[1] 1 0
|
||||
|
||||
- P2041, P3041, P4080 P5020, P5040:
|
||||
register[bit] FMan unit cell-index
|
||||
============================================================
|
||||
DCFG_DEVDISR2[6] 1 0
|
||||
DCFG_DEVDISR2[14] 2 1
|
||||
(Second FM available only in P4080 and P5040)
|
||||
|
||||
- B4860, T1040, T2080, T4240:
|
||||
register[bit] FMan unit cell-index
|
||||
============================================================
|
||||
DCFG_CCSR_DEVDISR2[24] 1 0
|
||||
DCFG_CCSR_DEVDISR2[25] 2 1
|
||||
(Second FM available only in T4240)
|
||||
|
||||
DEVDISR, DCFG_DEVDISR2 and DCFG_CCSR_DEVDISR2 are located in
|
||||
the specific SoC "Device Configuration/Pin Control" Memory
|
||||
Map.
|
||||
|
||||
- reg
|
||||
Usage: required
|
||||
Value type: <prop-encoded-array>
|
||||
Definition: A standard property. Specifies the offset of the
|
||||
following configuration registers:
|
||||
- BMI configuration registers.
|
||||
- QMI configuration registers.
|
||||
- DMA configuration registers.
|
||||
- FPM configuration registers.
|
||||
- FMan controller configuration registers.
|
||||
|
||||
- ranges
|
||||
Usage: required
|
||||
Value type: <prop-encoded-array>
|
||||
Definition: A standard property.
|
||||
|
||||
- clocks
|
||||
Usage: required
|
||||
Value type: <prop-encoded-array>
|
||||
Definition: phandle for fman clock.
|
||||
|
||||
- clock-names
|
||||
usage: optional
|
||||
Value type: <stringlist>
|
||||
Definition: A standard property
|
||||
|
||||
- interrupts
|
||||
Usage: required
|
||||
Value type: <prop-encoded-array>
|
||||
Definition: A pair of IRQs are specified in this property.
|
||||
The first element is associated with the event interrupts and
|
||||
the second element is associated with the error interrupts.
|
||||
|
||||
- fsl,qman-channel-range
|
||||
Usage: required
|
||||
Value type: <prop-encoded-array>
|
||||
Definition: Specifies the range of the available dedicated
|
||||
channels in the FMan. The first cell specifies the beginning
|
||||
of the range and the second cell specifies the number of
|
||||
channels.
|
||||
Further information available at:
|
||||
"Work Queue (WQ) Channel Assignments in the QMan" section
|
||||
in DPAA Reference Manual.
|
||||
|
||||
=============================================================================
|
||||
FMan MURAM Node
|
||||
|
||||
DESCRIPTION
|
||||
|
||||
FMan Internal memory - shared between all the FMan modules.
|
||||
It contains data structures that are common and written to or read by
|
||||
the modules.
|
||||
FMan internal memory is split into the following parts:
|
||||
Packet buffering (Tx/Rx FIFOs)
|
||||
Frames internal context
|
||||
|
||||
PROPERTIES
|
||||
|
||||
- compatible
|
||||
Usage: required
|
||||
Value type: <stringlist>
|
||||
Definition: Must include "fsl,fman-muram"
|
||||
|
||||
- ranges
|
||||
Usage: required
|
||||
Value type: <prop-encoded-array>
|
||||
Definition: A standard property.
|
||||
Specifies the multi-user memory offset and the size within
|
||||
the FMan.
|
||||
|
||||
EXAMPLE
|
||||
|
||||
muram@0 {
|
||||
compatible = "fsl,fman-muram";
|
||||
ranges = <0 0x000000 0x28000>;
|
||||
};
|
||||
|
||||
=============================================================================
|
||||
FMan Port Node
|
||||
|
||||
DESCRIPTION
|
||||
|
||||
The Frame Manager (FMan) supports several types of hardware ports:
|
||||
Ethernet receiver (RX)
|
||||
Ethernet transmitter (TX)
|
||||
Offline/Host command (O/H)
|
||||
|
||||
PROPERTIES
|
||||
|
||||
- compatible
|
||||
Usage: required
|
||||
Value type: <stringlist>
|
||||
Definition: A standard property.
|
||||
Must include one of the following:
|
||||
- "fsl,fman-v2-port-oh" for FManV2 OH ports
|
||||
- "fsl,fman-v2-port-rx" for FManV2 RX ports
|
||||
- "fsl,fman-v2-port-tx" for FManV2 TX ports
|
||||
- "fsl,fman-v3-port-oh" for FManV3 OH ports
|
||||
- "fsl,fman-v3-port-rx" for FManV3 RX ports
|
||||
- "fsl,fman-v3-port-tx" for FManV3 TX ports
|
||||
|
||||
- cell-index
|
||||
Usage: required
|
||||
Value type: <u32>
|
||||
Definition: Specifies the hardware port id.
|
||||
Each hardware port on the FMan has its own hardware PortID.
|
||||
Super set of all hardware Port IDs available at FMan Reference
|
||||
Manual under "FMan Hardware Ports in Freescale Devices" table.
|
||||
|
||||
Each hardware port is assigned a 4KB, port-specific page in
|
||||
the FMan hardware port memory region (which is part of the
|
||||
FMan memory map). The first 4 KB in the FMan hardware ports
|
||||
memory region is used for what are called common registers.
|
||||
The subsequent 63 4KB pages are allocated to the hardware
|
||||
ports.
|
||||
The page of a specific port is determined by the cell-index.
|
||||
|
||||
- reg
|
||||
Usage: required
|
||||
Value type: <prop-encoded-array>
|
||||
Definition: There is one reg region describing the port
|
||||
configuration registers.
|
||||
|
||||
EXAMPLE
|
||||
|
||||
port@a8000 {
|
||||
cell-index = <0x28>;
|
||||
compatible = "fsl,fman-v2-port-tx";
|
||||
reg = <0xa8000 0x1000>;
|
||||
};
|
||||
|
||||
port@88000 {
|
||||
cell-index = <0x8>;
|
||||
compatible = "fsl,fman-v2-port-rx";
|
||||
reg = <0x88000 0x1000>;
|
||||
};
|
||||
|
||||
port@81000 {
|
||||
cell-index = <0x1>;
|
||||
compatible = "fsl,fman-v2-port-oh";
|
||||
reg = <0x81000 0x1000>;
|
||||
};
|
||||
|
||||
=============================================================================
|
||||
FMan dTSEC/XGEC/mEMAC Node
|
||||
|
||||
DESCRIPTION
|
||||
|
||||
mEMAC/dTSEC/XGEC are the Ethernet network interfaces
|
||||
|
||||
PROPERTIES
|
||||
|
||||
- compatible
|
||||
Usage: required
|
||||
Value type: <stringlist>
|
||||
Definition: A standard property.
|
||||
Must include one of the following:
|
||||
- "fsl,fman-dtsec" for dTSEC MAC
|
||||
- "fsl,fman-xgec" for XGEC MAC
|
||||
- "fsl,fman-memac for mEMAC MAC
|
||||
|
||||
- cell-index
|
||||
Usage: required
|
||||
Value type: <u32>
|
||||
Definition: Specifies the MAC id.
|
||||
|
||||
The cell-index value may be used by the FMan or the SoC, to
|
||||
identify the MAC unit in the FMan (or SoC) memory map.
|
||||
In the tables bellow there's a description of the cell-index
|
||||
use, there are two tables, one describes the use of cell-index
|
||||
by the FMan, the second describes the use by the SoC:
|
||||
|
||||
1. FMan Registers
|
||||
|
||||
FManV2:
|
||||
register[bit] MAC cell-index
|
||||
============================================================
|
||||
FM_EPI[16] XGEC 8
|
||||
FM_EPI[16+n] dTSECn n-1
|
||||
FM_NPI[11+n] dTSECn n-1
|
||||
n = 1,..,5
|
||||
|
||||
FManV3:
|
||||
register[bit] MAC cell-index
|
||||
============================================================
|
||||
FM_EPI[16+n] mEMACn n-1
|
||||
FM_EPI[25] mEMAC10 9
|
||||
|
||||
FM_NPI[11+n] mEMACn n-1
|
||||
FM_NPI[10] mEMAC10 9
|
||||
FM_NPI[11] mEMAC9 8
|
||||
n = 1,..8
|
||||
|
||||
FM_EPI and FM_NPI are located in the FMan memory map.
|
||||
|
||||
2. SoC registers:
|
||||
|
||||
- P2041, P3041, P4080 P5020, P5040:
|
||||
register[bit] FMan MAC cell
|
||||
Unit index
|
||||
============================================================
|
||||
DCFG_DEVDISR2[7] 1 XGEC 8
|
||||
DCFG_DEVDISR2[7+n] 1 dTSECn n-1
|
||||
DCFG_DEVDISR2[15] 2 XGEC 8
|
||||
DCFG_DEVDISR2[15+n] 2 dTSECn n-1
|
||||
n = 1,..5
|
||||
|
||||
- T1040, T2080, T4240, B4860:
|
||||
register[bit] FMan MAC cell
|
||||
Unit index
|
||||
============================================================
|
||||
DCFG_CCSR_DEVDISR2[n-1] 1 mEMACn n-1
|
||||
DCFG_CCSR_DEVDISR2[11+n] 2 mEMACn n-1
|
||||
n = 1,..6,9,10
|
||||
|
||||
EVDISR, DCFG_DEVDISR2 and DCFG_CCSR_DEVDISR2 are located in
|
||||
the specific SoC "Device Configuration/Pin Control" Memory
|
||||
Map.
|
||||
|
||||
- reg
|
||||
Usage: required
|
||||
Value type: <prop-encoded-array>
|
||||
Definition: A standard property.
|
||||
|
||||
- fsl,fman-ports
|
||||
Usage: required
|
||||
Value type: <prop-encoded-array>
|
||||
Definition: An array of two phandles - the first references is
|
||||
the FMan RX port and the second is the TX port used by this
|
||||
MAC.
|
||||
|
||||
- ptp-timer
|
||||
Usage required
|
||||
Value type: <phandle>
|
||||
Definition: A phandle for 1EEE1588 timer.
|
||||
|
||||
EXAMPLE
|
||||
|
||||
fman1_tx28: port@a8000 {
|
||||
cell-index = <0x28>;
|
||||
compatible = "fsl,fman-v2-port-tx";
|
||||
reg = <0xa8000 0x1000>;
|
||||
};
|
||||
|
||||
fman1_rx8: port@88000 {
|
||||
cell-index = <0x8>;
|
||||
compatible = "fsl,fman-v2-port-rx";
|
||||
reg = <0x88000 0x1000>;
|
||||
};
|
||||
|
||||
ptp-timer: ptp_timer@fe000 {
|
||||
compatible = "fsl,fman-ptp-timer";
|
||||
reg = <0xfe000 0x1000>;
|
||||
};
|
||||
|
||||
ethernet@e0000 {
|
||||
compatible = "fsl,fman-dtsec";
|
||||
cell-index = <0>;
|
||||
reg = <0xe0000 0x1000>;
|
||||
fsl,fman-ports = <&fman1_rx8 &fman1_tx28>;
|
||||
ptp-timer = <&ptp-timer>;
|
||||
};
|
||||
|
||||
============================================================================
|
||||
FMan IEEE 1588 Node
|
||||
|
||||
DESCRIPTION
|
||||
|
||||
The FMan interface to support IEEE 1588
|
||||
|
||||
|
||||
PROPERTIES
|
||||
|
||||
- compatible
|
||||
Usage: required
|
||||
Value type: <stringlist>
|
||||
Definition: A standard property.
|
||||
Must include "fsl,fman-ptp-timer".
|
||||
|
||||
- reg
|
||||
Usage: required
|
||||
Value type: <prop-encoded-array>
|
||||
Definition: A standard property.
|
||||
|
||||
EXAMPLE
|
||||
|
||||
ptp-timer@fe000 {
|
||||
compatible = "fsl,fman-ptp-timer";
|
||||
reg = <0xfe000 0x1000>;
|
||||
};
|
||||
|
||||
=============================================================================
|
||||
Example
|
||||
|
||||
fman@400000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
cell-index = <1>;
|
||||
compatible = "fsl,fman"
|
||||
ranges = <0 0x400000 0x100000>;
|
||||
reg = <0x400000 0x100000>;
|
||||
clocks = <&fman_clk>;
|
||||
clock-names = "fmanclk";
|
||||
interrupts = <
|
||||
96 2 0 0
|
||||
16 2 1 1>;
|
||||
fsl,qman-channel-range = <0x40 0xc>;
|
||||
|
||||
muram@0 {
|
||||
compatible = "fsl,fman-muram";
|
||||
reg = <0x0 0x28000>;
|
||||
};
|
||||
|
||||
port@81000 {
|
||||
cell-index = <1>;
|
||||
compatible = "fsl,fman-v2-port-oh";
|
||||
reg = <0x81000 0x1000>;
|
||||
};
|
||||
|
||||
port@82000 {
|
||||
cell-index = <2>;
|
||||
compatible = "fsl,fman-v2-port-oh";
|
||||
reg = <0x82000 0x1000>;
|
||||
};
|
||||
|
||||
port@83000 {
|
||||
cell-index = <3>;
|
||||
compatible = "fsl,fman-v2-port-oh";
|
||||
reg = <0x83000 0x1000>;
|
||||
};
|
||||
|
||||
port@84000 {
|
||||
cell-index = <4>;
|
||||
compatible = "fsl,fman-v2-port-oh";
|
||||
reg = <0x84000 0x1000>;
|
||||
};
|
||||
|
||||
port@85000 {
|
||||
cell-index = <5>;
|
||||
compatible = "fsl,fman-v2-port-oh";
|
||||
reg = <0x85000 0x1000>;
|
||||
};
|
||||
|
||||
port@86000 {
|
||||
cell-index = <6>;
|
||||
compatible = "fsl,fman-v2-port-oh";
|
||||
reg = <0x86000 0x1000>;
|
||||
};
|
||||
|
||||
fman1_rx_0x8: port@88000 {
|
||||
cell-index = <0x8>;
|
||||
compatible = "fsl,fman-v2-port-rx";
|
||||
reg = <0x88000 0x1000>;
|
||||
};
|
||||
|
||||
fman1_rx_0x9: port@89000 {
|
||||
cell-index = <0x9>;
|
||||
compatible = "fsl,fman-v2-port-rx";
|
||||
reg = <0x89000 0x1000>;
|
||||
};
|
||||
|
||||
fman1_rx_0xa: port@8a000 {
|
||||
cell-index = <0xa>;
|
||||
compatible = "fsl,fman-v2-port-rx";
|
||||
reg = <0x8a000 0x1000>;
|
||||
};
|
||||
|
||||
fman1_rx_0xb: port@8b000 {
|
||||
cell-index = <0xb>;
|
||||
compatible = "fsl,fman-v2-port-rx";
|
||||
reg = <0x8b000 0x1000>;
|
||||
};
|
||||
|
||||
fman1_rx_0xc: port@8c000 {
|
||||
cell-index = <0xc>;
|
||||
compatible = "fsl,fman-v2-port-rx";
|
||||
reg = <0x8c000 0x1000>;
|
||||
};
|
||||
|
||||
fman1_rx_0x10: port@90000 {
|
||||
cell-index = <0x10>;
|
||||
compatible = "fsl,fman-v2-port-rx";
|
||||
reg = <0x90000 0x1000>;
|
||||
};
|
||||
|
||||
fman1_tx_0x28: port@a8000 {
|
||||
cell-index = <0x28>;
|
||||
compatible = "fsl,fman-v2-port-tx";
|
||||
reg = <0xa8000 0x1000>;
|
||||
};
|
||||
|
||||
fman1_tx_0x29: port@a9000 {
|
||||
cell-index = <0x29>;
|
||||
compatible = "fsl,fman-v2-port-tx";
|
||||
reg = <0xa9000 0x1000>;
|
||||
};
|
||||
|
||||
fman1_tx_0x2a: port@aa000 {
|
||||
cell-index = <0x2a>;
|
||||
compatible = "fsl,fman-v2-port-tx";
|
||||
reg = <0xaa000 0x1000>;
|
||||
};
|
||||
|
||||
fman1_tx_0x2b: port@ab000 {
|
||||
cell-index = <0x2b>;
|
||||
compatible = "fsl,fman-v2-port-tx";
|
||||
reg = <0xab000 0x1000>;
|
||||
};
|
||||
|
||||
fman1_tx_0x2c: port@ac0000 {
|
||||
cell-index = <0x2c>;
|
||||
compatible = "fsl,fman-v2-port-tx";
|
||||
reg = <0xac000 0x1000>;
|
||||
};
|
||||
|
||||
fman1_tx_0x30: port@b0000 {
|
||||
cell-index = <0x30>;
|
||||
compatible = "fsl,fman-v2-port-tx";
|
||||
reg = <0xb0000 0x1000>;
|
||||
};
|
||||
|
||||
ethernet@e0000 {
|
||||
compatible = "fsl,fman-dtsec";
|
||||
cell-index = <0>;
|
||||
reg = <0xe0000 0x1000>;
|
||||
fsl,fman-ports = <&fman1_rx_0x8 &fman1_tx_0x28>;
|
||||
};
|
||||
|
||||
ethernet@e2000 {
|
||||
compatible = "fsl,fman-dtsec";
|
||||
cell-index = <1>;
|
||||
reg = <0xe2000 0x1000>;
|
||||
fsl,fman-ports = <&fman1_rx_0x9 &fman1_tx_0x29>;
|
||||
};
|
||||
|
||||
ethernet@e4000 {
|
||||
compatible = "fsl,fman-dtsec";
|
||||
cell-index = <2>;
|
||||
reg = <0xe4000 0x1000>;
|
||||
fsl,fman-ports = <&fman1_rx_0xa &fman1_tx_0x2a>;
|
||||
};
|
||||
|
||||
ethernet@e6000 {
|
||||
compatible = "fsl,fman-dtsec";
|
||||
cell-index = <3>;
|
||||
reg = <0xe6000 0x1000>;
|
||||
fsl,fman-ports = <&fman1_rx_0xb &fman1_tx_0x2b>;
|
||||
};
|
||||
|
||||
ethernet@e8000 {
|
||||
compatible = "fsl,fman-dtsec";
|
||||
cell-index = <4>;
|
||||
reg = <0xf0000 0x1000>;
|
||||
fsl,fman-ports = <&fman1_rx_0xc &fman1_tx_0x2c>;
|
||||
|
||||
ethernet@f0000 {
|
||||
cell-index = <8>;
|
||||
compatible = "fsl,fman-xgec";
|
||||
reg = <0xf0000 0x1000>;
|
||||
fsl,fman-ports = <&fman1_rx_0x10 &fman1_tx_0x30>;
|
||||
};
|
||||
|
||||
ptp-timer@fe000 {
|
||||
compatible = "fsl,fman-ptp-timer";
|
||||
reg = <0xfe000 0x1000>;
|
||||
};
|
||||
};
|
||||
Loading…
Reference in New Issue