tty/serial: at91: fix bad offset for UART timeout register

With SAMA5D2, the UART has hw timeout but the offset of the register to
define this value is not the same as the one for USART.
When using the new UART, the value of this register was 0 so we never
get timeout irqs. It involves that when using DMA, we were stuck until
the execution of the dma callback which happens when a buffer is full
(so after receiving 2048 bytes).

Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
Ludovic Desroches 2016-02-22 15:18:55 +01:00 committed by Greg Kroah-Hartman
parent f4a8ab04dd
commit 2958ccee36
2 changed files with 15 additions and 7 deletions

View File

@ -159,6 +159,7 @@ struct atmel_uart_port {
u32 rts_high; u32 rts_high;
u32 rts_low; u32 rts_low;
bool ms_irq_enabled; bool ms_irq_enabled;
u32 rtor; /* address of receiver timeout register if it exists */
bool has_hw_timer; bool has_hw_timer;
struct timer_list uart_timer; struct timer_list uart_timer;
@ -1718,12 +1719,16 @@ static void atmel_get_ip_name(struct uart_port *port)
atmel_port->has_hw_timer = false; atmel_port->has_hw_timer = false;
if (name == usart || name == new_uart) { if (name == new_uart) {
dev_dbg(port->dev, "Usart or uart with hw timer\n"); dev_dbg(port->dev, "Uart with hw timer");
atmel_port->has_hw_timer = true; atmel_port->has_hw_timer = true;
atmel_port->rtor = ATMEL_UA_RTOR;
} else if (name == usart) {
dev_dbg(port->dev, "Usart\n");
atmel_port->has_hw_timer = true;
atmel_port->rtor = ATMEL_US_RTOR;
} else if (name == dbgu_uart) { } else if (name == dbgu_uart) {
dev_dbg(port->dev, "Dbgu or uart without hw timer\n"); dev_dbg(port->dev, "Dbgu or uart without hw timer\n");
atmel_port->has_hw_timer = false;
} else { } else {
/* fallback for older SoCs: use version field */ /* fallback for older SoCs: use version field */
version = atmel_uart_readl(port, ATMEL_US_VERSION); version = atmel_uart_readl(port, ATMEL_US_VERSION);
@ -1732,11 +1737,11 @@ static void atmel_get_ip_name(struct uart_port *port)
case 0x10213: case 0x10213:
dev_dbg(port->dev, "This version is usart\n"); dev_dbg(port->dev, "This version is usart\n");
atmel_port->has_hw_timer = true; atmel_port->has_hw_timer = true;
atmel_port->rtor = ATMEL_US_RTOR;
break; break;
case 0x203: case 0x203:
case 0x10202: case 0x10202:
dev_dbg(port->dev, "This version is uart\n"); dev_dbg(port->dev, "This version is uart\n");
atmel_port->has_hw_timer = false;
break; break;
default: default:
dev_err(port->dev, "Not supported ip name nor version, set to uart\n"); dev_err(port->dev, "Not supported ip name nor version, set to uart\n");
@ -1841,7 +1846,8 @@ static int atmel_startup(struct uart_port *port)
jiffies + uart_poll_timeout(port)); jiffies + uart_poll_timeout(port));
/* set USART timeout */ /* set USART timeout */
} else { } else {
atmel_uart_writel(port, ATMEL_US_RTOR, PDC_RX_TIMEOUT); atmel_uart_writel(port, atmel_port->rtor,
PDC_RX_TIMEOUT);
atmel_uart_writel(port, ATMEL_US_CR, ATMEL_US_STTTO); atmel_uart_writel(port, ATMEL_US_CR, ATMEL_US_STTTO);
atmel_uart_writel(port, ATMEL_US_IER, atmel_uart_writel(port, ATMEL_US_IER,
@ -1856,7 +1862,8 @@ static int atmel_startup(struct uart_port *port)
jiffies + uart_poll_timeout(port)); jiffies + uart_poll_timeout(port));
/* set USART timeout */ /* set USART timeout */
} else { } else {
atmel_uart_writel(port, ATMEL_US_RTOR, PDC_RX_TIMEOUT); atmel_uart_writel(port, atmel_port->rtor,
PDC_RX_TIMEOUT);
atmel_uart_writel(port, ATMEL_US_CR, ATMEL_US_STTTO); atmel_uart_writel(port, ATMEL_US_CR, ATMEL_US_STTTO);
atmel_uart_writel(port, ATMEL_US_IER, atmel_uart_writel(port, ATMEL_US_IER,

View File

@ -119,7 +119,8 @@
#define ATMEL_US_BRGR 0x20 /* Baud Rate Generator Register */ #define ATMEL_US_BRGR 0x20 /* Baud Rate Generator Register */
#define ATMEL_US_CD GENMASK(15, 0) /* Clock Divider */ #define ATMEL_US_CD GENMASK(15, 0) /* Clock Divider */
#define ATMEL_US_RTOR 0x24 /* Receiver Time-out Register */ #define ATMEL_US_RTOR 0x24 /* Receiver Time-out Register for USART */
#define ATMEL_UA_RTOR 0x28 /* Receiver Time-out Register for UART */
#define ATMEL_US_TO GENMASK(15, 0) /* Time-out Value */ #define ATMEL_US_TO GENMASK(15, 0) /* Time-out Value */
#define ATMEL_US_TTGR 0x28 /* Transmitter Timeguard Register */ #define ATMEL_US_TTGR 0x28 /* Transmitter Timeguard Register */