hpsa: use scsi host_no as hpsa controller number
Rather than numbering the hpsa controllers with an incrementing 0..n value (e.g., that shows up in /proc/interrupts), use the scsi midlayer host_no (e.g. matching /sys/class/scsi_host/hostNN). Reviewed-by: Scott Teel <scott.teel@pmcs.com> Reviewed-by: Kevin Barnett <kevin.barnett@pmcs.com> Reviewed-by: Tomas Henzl <thenzl@redhat.com> Reviewed-by: Hannes Reinecke <hare@Suse.de> Signed-off-by: Robert Elliott <elliott@hp.com> Signed-off-by: Don Brace <don.brace@pmcs.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
This commit is contained in:
parent
73153fe533
commit
2946e82bdd
|
@ -324,32 +324,35 @@ static int check_for_unit_attention(struct ctlr_info *h,
|
|||
switch (asc) {
|
||||
case STATE_CHANGED:
|
||||
dev_warn(&h->pdev->dev,
|
||||
HPSA "%d: a state change detected, command retried\n",
|
||||
h->ctlr);
|
||||
"%s: a state change detected, command retried\n",
|
||||
h->devname);
|
||||
break;
|
||||
case LUN_FAILED:
|
||||
dev_warn(&h->pdev->dev,
|
||||
HPSA "%d: LUN failure detected\n", h->ctlr);
|
||||
"%s: LUN failure detected\n", h->devname);
|
||||
break;
|
||||
case REPORT_LUNS_CHANGED:
|
||||
dev_warn(&h->pdev->dev,
|
||||
HPSA "%d: report LUN data changed\n", h->ctlr);
|
||||
"%s: report LUN data changed\n", h->devname);
|
||||
/*
|
||||
* Note: this REPORT_LUNS_CHANGED condition only occurs on the external
|
||||
* target (array) devices.
|
||||
*/
|
||||
break;
|
||||
case POWER_OR_RESET:
|
||||
dev_warn(&h->pdev->dev, HPSA "%d: a power on "
|
||||
"or device reset detected\n", h->ctlr);
|
||||
dev_warn(&h->pdev->dev,
|
||||
"%s: a power on or device reset detected\n",
|
||||
h->devname);
|
||||
break;
|
||||
case UNIT_ATTENTION_CLEARED:
|
||||
dev_warn(&h->pdev->dev, HPSA "%d: unit attention "
|
||||
"cleared by another initiator\n", h->ctlr);
|
||||
dev_warn(&h->pdev->dev,
|
||||
"%s: unit attention cleared by another initiator\n",
|
||||
h->devname);
|
||||
break;
|
||||
default:
|
||||
dev_warn(&h->pdev->dev, HPSA "%d: unknown "
|
||||
"unit attention detected\n", h->ctlr);
|
||||
dev_warn(&h->pdev->dev,
|
||||
"%s: unknown unit attention detected\n",
|
||||
h->devname);
|
||||
break;
|
||||
}
|
||||
return 1;
|
||||
|
@ -4764,22 +4767,16 @@ static int hpsa_scan_finished(struct Scsi_Host *sh,
|
|||
return finished;
|
||||
}
|
||||
|
||||
static void hpsa_unregister_scsi(struct ctlr_info *h)
|
||||
{
|
||||
/* we are being forcibly unloaded, and may not refuse. */
|
||||
scsi_remove_host(h->scsi_host);
|
||||
scsi_host_put(h->scsi_host);
|
||||
h->scsi_host = NULL;
|
||||
}
|
||||
|
||||
static int hpsa_register_scsi(struct ctlr_info *h)
|
||||
static int hpsa_scsi_host_alloc(struct ctlr_info *h)
|
||||
{
|
||||
struct Scsi_Host *sh;
|
||||
int error;
|
||||
|
||||
sh = scsi_host_alloc(&hpsa_driver_template, sizeof(h));
|
||||
if (sh == NULL)
|
||||
goto fail;
|
||||
if (sh == NULL) {
|
||||
dev_err(&h->pdev->dev, "scsi_host_alloc failed\n");
|
||||
return -ENOMEM;
|
||||
}
|
||||
|
||||
sh->io_port = 0;
|
||||
sh->n_io_port = 0;
|
||||
|
@ -4791,7 +4788,6 @@ static int hpsa_register_scsi(struct ctlr_info *h)
|
|||
sh->can_queue = h->nr_cmds - HPSA_NRESERVED_CMDS;
|
||||
sh->cmd_per_lun = sh->can_queue;
|
||||
sh->sg_tablesize = h->maxsgentries;
|
||||
h->scsi_host = sh;
|
||||
sh->hostdata[0] = (unsigned long) h;
|
||||
sh->irq = h->intr[h->intr_mode];
|
||||
sh->unique_id = sh->irq;
|
||||
|
@ -4800,24 +4796,24 @@ static int hpsa_register_scsi(struct ctlr_info *h)
|
|||
dev_err(&h->pdev->dev,
|
||||
"%s: scsi_init_shared_tag_map failed for controller %d\n",
|
||||
__func__, h->ctlr);
|
||||
goto fail_host_put;
|
||||
scsi_host_put(sh);
|
||||
return error;
|
||||
}
|
||||
error = scsi_add_host(sh, &h->pdev->dev);
|
||||
if (error) {
|
||||
dev_err(&h->pdev->dev, "%s: scsi_add_host failed for controller %d\n",
|
||||
__func__, h->ctlr);
|
||||
goto fail_host_put;
|
||||
}
|
||||
scsi_scan_host(sh);
|
||||
h->scsi_host = sh;
|
||||
return 0;
|
||||
}
|
||||
|
||||
fail_host_put:
|
||||
scsi_host_put(sh);
|
||||
return error;
|
||||
fail:
|
||||
dev_err(&h->pdev->dev, "%s: scsi_host_alloc"
|
||||
" failed for controller %d\n", __func__, h->ctlr);
|
||||
return -ENOMEM;
|
||||
static int hpsa_scsi_add_host(struct ctlr_info *h)
|
||||
{
|
||||
int rv;
|
||||
|
||||
rv = scsi_add_host(h->scsi_host, &h->pdev->dev);
|
||||
if (rv) {
|
||||
dev_err(&h->pdev->dev, "scsi_add_host failed\n");
|
||||
return rv;
|
||||
}
|
||||
scsi_scan_host(h->scsi_host);
|
||||
return 0;
|
||||
}
|
||||
|
||||
/*
|
||||
|
@ -7483,7 +7479,9 @@ static void hpsa_undo_allocations_after_kdump_soft_reset(struct ctlr_info *h)
|
|||
hpsa_free_sg_chain_blocks(h); /* init_one 6 */
|
||||
hpsa_free_cmd_pool(h); /* init_one 5 */
|
||||
hpsa_free_irqs(h); /* init_one 4 */
|
||||
hpsa_free_pci_init(h); /* init_one 3 */
|
||||
scsi_host_put(h->scsi_host); /* init_one 3 */
|
||||
h->scsi_host = NULL; /* init_one 3 */
|
||||
hpsa_free_pci_init(h); /* init_one 2_5 */
|
||||
free_percpu(h->lockup_detected); /* init_one 2 */
|
||||
h->lockup_detected = NULL; /* init_one 2 */
|
||||
if (h->resubmit_wq) {
|
||||
|
@ -7793,9 +7791,15 @@ reinit_after_soft_reset:
|
|||
|
||||
rc = hpsa_pci_init(h);
|
||||
if (rc)
|
||||
goto clean2; /* lockup, aer/h */
|
||||
goto clean2; /* lu, aer/h */
|
||||
|
||||
sprintf(h->devname, HPSA "%d", number_of_controllers);
|
||||
/* relies on h-> settings made by hpsa_pci_init, including
|
||||
* interrupt_mode h->intr */
|
||||
rc = hpsa_scsi_host_alloc(h);
|
||||
if (rc)
|
||||
goto clean2_5; /* pci, lu, aer/h */
|
||||
|
||||
sprintf(h->devname, HPSA "%d", h->scsi_host->host_no);
|
||||
h->ctlr = number_of_controllers;
|
||||
number_of_controllers++;
|
||||
|
||||
|
@ -7809,7 +7813,7 @@ reinit_after_soft_reset:
|
|||
dac = 0;
|
||||
} else {
|
||||
dev_err(&pdev->dev, "no suitable DMA available\n");
|
||||
goto clean3; /* pci, lockup, aer/h */
|
||||
goto clean3; /* shost, pci, lu, aer/h */
|
||||
}
|
||||
}
|
||||
|
||||
|
@ -7818,13 +7822,13 @@ reinit_after_soft_reset:
|
|||
|
||||
rc = hpsa_request_irqs(h, do_hpsa_intr_msi, do_hpsa_intr_intx);
|
||||
if (rc)
|
||||
goto clean3; /* pci, lockup, aer/h */
|
||||
goto clean3; /* shost, pci, lu, aer/h */
|
||||
rc = hpsa_alloc_cmd_pool(h);
|
||||
if (rc)
|
||||
goto clean4; /* irq, pci, lockup, aer/h */
|
||||
goto clean4; /* irq, shost, pci, lu, aer/h */
|
||||
rc = hpsa_alloc_sg_chain_blocks(h);
|
||||
if (rc)
|
||||
goto clean5; /* cmd, irq, pci, lockup, aer/h */
|
||||
goto clean5; /* cmd, irq, shost, pci, lu, aer/h */
|
||||
init_waitqueue_head(&h->scan_wait_queue);
|
||||
init_waitqueue_head(&h->abort_cmd_wait_queue);
|
||||
init_waitqueue_head(&h->abort_sync_wait_queue);
|
||||
|
@ -7833,11 +7837,16 @@ reinit_after_soft_reset:
|
|||
pci_set_drvdata(pdev, h);
|
||||
h->ndevices = 0;
|
||||
h->hba_mode_enabled = 0;
|
||||
h->scsi_host = NULL;
|
||||
|
||||
spin_lock_init(&h->devlock);
|
||||
rc = hpsa_put_ctlr_into_performant_mode(h);
|
||||
if (rc)
|
||||
goto clean6; /* sg, cmd, irq, pci, lockup, aer/h */
|
||||
goto clean6; /* sg, cmd, irq, shost, pci, lu, aer/h */
|
||||
|
||||
/* hook into SCSI subsystem */
|
||||
rc = hpsa_scsi_add_host(h);
|
||||
if (rc)
|
||||
goto clean7; /* perf, sg, cmd, irq, shost, pci, lu, aer/h */
|
||||
|
||||
/* create the resubmit workqueue */
|
||||
h->rescan_ctlr_wq = hpsa_create_controller_wq(h, "rescan");
|
||||
|
@ -7892,7 +7901,7 @@ reinit_after_soft_reset:
|
|||
rc = hpsa_kdump_soft_reset(h);
|
||||
if (rc)
|
||||
/* Neither hard nor soft reset worked, we're hosed. */
|
||||
goto clean8;
|
||||
goto clean9;
|
||||
|
||||
dev_info(&h->pdev->dev, "Board READY.\n");
|
||||
dev_info(&h->pdev->dev,
|
||||
|
@ -7927,9 +7936,6 @@ reinit_after_soft_reset:
|
|||
h->access.set_intr_mask(h, HPSA_INTR_ON);
|
||||
|
||||
hpsa_hba_inquiry(h);
|
||||
rc = hpsa_register_scsi(h); /* hook ourselves into SCSI subsystem */
|
||||
if (rc)
|
||||
goto clean8; /* wq, perf, sg, cmd, irq, pci, lockup, aer/h */
|
||||
|
||||
/* Monitor the controller for firmware lockups */
|
||||
h->heartbeat_sample_interval = HEARTBEAT_SAMPLE_INTERVAL;
|
||||
|
@ -7941,20 +7947,23 @@ reinit_after_soft_reset:
|
|||
h->heartbeat_sample_interval);
|
||||
return 0;
|
||||
|
||||
clean8: /* perf, sg, cmd, irq, pci, lockup, aer/h */
|
||||
clean9: /* wq, sh, perf, sg, cmd, irq, shost, pci, lu, aer/h */
|
||||
kfree(h->hba_inquiry_data);
|
||||
clean7: /* perf, sg, cmd, irq, pci, lockup, aer/h */
|
||||
clean7: /* perf, sg, cmd, irq, shost, pci, lu, aer/h */
|
||||
hpsa_free_performant_mode(h);
|
||||
h->access.set_intr_mask(h, HPSA_INTR_OFF);
|
||||
clean6: /* sg, cmd, irq, pci, lockup, wq/aer/h */
|
||||
hpsa_free_sg_chain_blocks(h);
|
||||
clean5: /* cmd, irq, pci, lockup, aer/h */
|
||||
clean5: /* cmd, irq, shost, pci, lu, aer/h */
|
||||
hpsa_free_cmd_pool(h);
|
||||
clean4: /* irq, pci, lockup, aer/h */
|
||||
clean4: /* irq, shost, pci, lu, aer/h */
|
||||
hpsa_free_irqs(h);
|
||||
clean3: /* pci, lockup, aer/h */
|
||||
clean3: /* shost, pci, lu, aer/h */
|
||||
scsi_host_put(h->scsi_host);
|
||||
h->scsi_host = NULL;
|
||||
clean2_5: /* pci, lu, aer/h */
|
||||
hpsa_free_pci_init(h);
|
||||
clean2: /* lockup, aer/h */
|
||||
clean2: /* lu, aer/h */
|
||||
if (h->lockup_detected) {
|
||||
free_percpu(h->lockup_detected);
|
||||
h->lockup_detected = NULL;
|
||||
|
@ -8053,17 +8062,22 @@ static void hpsa_remove_one(struct pci_dev *pdev)
|
|||
|
||||
hpsa_free_device_info(h); /* scan */
|
||||
|
||||
hpsa_unregister_scsi(h); /* init_one 9 */
|
||||
kfree(h->hba_inquiry_data); /* init_one 9 */
|
||||
h->hba_inquiry_data = NULL; /* init_one 9 */
|
||||
kfree(h->hba_inquiry_data); /* init_one 10 */
|
||||
h->hba_inquiry_data = NULL; /* init_one 10 */
|
||||
if (h->scsi_host)
|
||||
scsi_remove_host(h->scsi_host); /* init_one 8 */
|
||||
hpsa_free_ioaccel2_sg_chain_blocks(h);
|
||||
hpsa_free_performant_mode(h); /* init_one 7 */
|
||||
hpsa_free_sg_chain_blocks(h); /* init_one 6 */
|
||||
hpsa_free_cmd_pool(h); /* init_one 5 */
|
||||
|
||||
/* hpsa_free_irqs already called via hpsa_shutdown init_one 4 */
|
||||
|
||||
scsi_host_put(h->scsi_host); /* init_one 3 */
|
||||
h->scsi_host = NULL; /* init_one 3 */
|
||||
|
||||
/* includes hpsa_disable_interrupt_mode - pci_init 2 */
|
||||
hpsa_free_pci_init(h); /* init_one 3 */
|
||||
hpsa_free_pci_init(h); /* init_one 2.5 */
|
||||
|
||||
free_percpu(h->lockup_detected); /* init_one 2 */
|
||||
h->lockup_detected = NULL; /* init_one 2 */
|
||||
|
|
Loading…
Reference in New Issue