Merge git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/avr32-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/avr32-2.6:
  avr32: Make atstk1006_nand_data definition static
  avr32: Reduce DataFlash bus speed to 8 MHz on ATNGW100
  avr32: Update defconfigs
  avr32: Clean up HMATRIX code
  avr32: Add MMIO address definitions for certain controllers
  avr32: Introduce <mach/chip.h>
  avr32: Remove include/asm-avr32/arch-at32ap
This commit is contained in:
Linus Torvalds 2008-08-09 10:53:42 -07:00
commit 28efb9e1a7
29 changed files with 1809 additions and 932 deletions

View File

@ -39,20 +39,6 @@ core-y += arch/avr32/mm/
drivers-$(CONFIG_OPROFILE) += arch/avr32/oprofile/ drivers-$(CONFIG_OPROFILE) += arch/avr32/oprofile/
libs-y += arch/avr32/lib/ libs-y += arch/avr32/lib/
archincdir-$(CONFIG_PLATFORM_AT32AP) := arch-at32ap
include/asm-avr32/.arch: $(wildcard include/config/platform/*.h) include/config/auto.conf
@echo ' SYMLINK include/asm-avr32/arch -> include/asm-avr32/$(archincdir-y)'
ifneq ($(KBUILD_SRC),)
$(Q)mkdir -p include/asm-avr32
$(Q)ln -fsn $(srctree)/include/asm-avr32/$(archincdir-y) include/asm-avr32/arch
else
$(Q)ln -fsn $(archincdir-y) include/asm-avr32/arch
endif
@touch $@
archprepare: include/asm-avr32/.arch
CLEAN_FILES += include/asm-avr32/.arch include/asm-avr32/arch CLEAN_FILES += include/asm-avr32/.arch include/asm-avr32/arch
BOOT_TARGETS := vmlinux.elf vmlinux.bin uImage uImage.srec BOOT_TARGETS := vmlinux.elf vmlinux.bin uImage uImage.srec

View File

@ -47,7 +47,7 @@ static struct eth_platform_data __initdata eth_data[2];
static struct spi_board_info spi0_board_info[] __initdata = { static struct spi_board_info spi0_board_info[] __initdata = {
{ {
.modalias = "mtd_dataflash", .modalias = "mtd_dataflash",
.max_speed_hz = 10000000, .max_speed_hz = 8000000,
.chip_select = 0, .chip_select = 0,
}, },
}; };

View File

@ -96,7 +96,7 @@ static struct mtd_partition *nand_part_info(int size, int *num_partitions)
return nand_partitions; return nand_partitions;
} }
struct atmel_nand_data atstk1006_nand_data __initdata = { static struct atmel_nand_data atstk1006_nand_data __initdata = {
.cle = 21, .cle = 21,
.ale = 22, .ale = 22,
.rdy_pin = GPIO_PIN_PB(30), .rdy_pin = GPIO_PIN_PB(30),

View File

@ -1,7 +1,7 @@
# #
# Automatically generated make config: don't edit # Automatically generated make config: don't edit
# Linux kernel version: 2.6.26-rc3 # Linux kernel version: 2.6.27-rc1
# Mon May 26 13:30:59 2008 # Tue Aug 5 16:00:47 2008
# #
CONFIG_AVR32=y CONFIG_AVR32=y
CONFIG_GENERIC_GPIO=y CONFIG_GENERIC_GPIO=y
@ -78,10 +78,16 @@ CONFIG_PROFILING=y
CONFIG_OPROFILE=m CONFIG_OPROFILE=m
CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y CONFIG_KPROBES=y
# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
# CONFIG_HAVE_IOREMAP_PROT is not set
CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KPROBES=y
# CONFIG_HAVE_KRETPROBES is not set # CONFIG_HAVE_KRETPROBES is not set
# CONFIG_HAVE_ARCH_TRACEHOOK is not set
# CONFIG_HAVE_DMA_ATTRS is not set # CONFIG_HAVE_DMA_ATTRS is not set
# CONFIG_USE_GENERIC_SMP_HELPERS is not set
CONFIG_HAVE_CLK=y
CONFIG_PROC_PAGE_MONITOR=y CONFIG_PROC_PAGE_MONITOR=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set # CONFIG_TINY_SHMEM is not set
@ -98,6 +104,7 @@ CONFIG_BLOCK=y
# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set # CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# #
# IO Schedulers # IO Schedulers
@ -142,6 +149,7 @@ CONFIG_PHYS_OFFSET=0x10000000
CONFIG_PREEMPT_NONE=y CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set # CONFIG_PREEMPT is not set
CONFIG_QUICKLIST=y
# CONFIG_HAVE_ARCH_BOOTMEM_NODE is not set # CONFIG_HAVE_ARCH_BOOTMEM_NODE is not set
# CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set # CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set
# CONFIG_NEED_NODE_MEMMAP_SIZE is not set # CONFIG_NEED_NODE_MEMMAP_SIZE is not set
@ -160,6 +168,7 @@ CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set # CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0 CONFIG_ZONE_DMA_FLAG=0
CONFIG_NR_QUICK=2
CONFIG_VIRT_TO_BUS=y CONFIG_VIRT_TO_BUS=y
# CONFIG_OWNERSHIP_TRACE is not set # CONFIG_OWNERSHIP_TRACE is not set
CONFIG_NMI_DEBUGGING=y CONFIG_NMI_DEBUGGING=y
@ -174,6 +183,12 @@ CONFIG_CMDLINE=""
# #
# Power management options # Power management options
# #
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
CONFIG_PM_SLEEP=y
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# #
# CPU Frequency scaling # CPU Frequency scaling
@ -205,10 +220,6 @@ CONFIG_CPU_FREQ_AT32AP=y
# #
CONFIG_BINFMT_ELF=y CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set # CONFIG_BINFMT_MISC is not set
#
# Networking
#
CONFIG_NET=y CONFIG_NET=y
# #
@ -222,6 +233,7 @@ CONFIG_XFRM_USER=y
# CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set # CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set # CONFIG_XFRM_STATISTICS is not set
CONFIG_XFRM_IPCOMP=y
CONFIG_NET_KEY=y CONFIG_NET_KEY=y
# CONFIG_NET_KEY_MIGRATE is not set # CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y CONFIG_INET=y
@ -339,8 +351,10 @@ CONFIG_IP6_NF_MANGLE=m
# CONFIG_IP_SCTP is not set # CONFIG_IP_SCTP is not set
# CONFIG_TIPC is not set # CONFIG_TIPC is not set
# CONFIG_ATM is not set # CONFIG_ATM is not set
CONFIG_STP=m
CONFIG_BRIDGE=m CONFIG_BRIDGE=m
CONFIG_VLAN_8021Q=m CONFIG_VLAN_8021Q=m
# CONFIG_VLAN_8021Q_GVRP is not set
# CONFIG_DECNET is not set # CONFIG_DECNET is not set
CONFIG_LLC=m CONFIG_LLC=m
# CONFIG_LLC2 is not set # CONFIG_LLC2 is not set
@ -499,7 +513,6 @@ CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
# CONFIG_ATA is not set # CONFIG_ATA is not set
# CONFIG_MD is not set # CONFIG_MD is not set
CONFIG_NETDEVICES=y CONFIG_NETDEVICES=y
# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_DUMMY is not set # CONFIG_DUMMY is not set
# CONFIG_BONDING is not set # CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set # CONFIG_MACVLAN is not set
@ -607,21 +620,35 @@ CONFIG_I2C_ALGOBIT=m
# #
# I2C Hardware Bus support # I2C Hardware Bus support
# #
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
CONFIG_I2C_GPIO=m CONFIG_I2C_GPIO=m
# CONFIG_I2C_OCORES is not set # CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_SIMTEC is not set # CONFIG_I2C_SIMTEC is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set # CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_STUB is not set
#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set # CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
# #
# Miscellaneous I2C Chip support # Miscellaneous I2C Chip support
# #
# CONFIG_DS1682 is not set # CONFIG_DS1682 is not set
CONFIG_AT24=m
# CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set # CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_PCF8591 is not set
# CONFIG_TPS65010 is not set # CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_MAX6875 is not set
@ -646,27 +673,32 @@ CONFIG_SPI_ATMEL=y
# CONFIG_SPI_AT25 is not set # CONFIG_SPI_AT25 is not set
CONFIG_SPI_SPIDEV=m CONFIG_SPI_SPIDEV=m
# CONFIG_SPI_TLE62X0 is not set # CONFIG_SPI_TLE62X0 is not set
CONFIG_HAVE_GPIO_LIB=y CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_GPIOLIB=y
#
# GPIO Support
#
# CONFIG_DEBUG_GPIO is not set # CONFIG_DEBUG_GPIO is not set
CONFIG_GPIO_SYSFS=y
# #
# I2C GPIO expanders: # I2C GPIO expanders:
# #
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCA953X is not set # CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCF857X is not set # CONFIG_GPIO_PCF857X is not set
#
# PCI GPIO expanders:
#
# #
# SPI GPIO expanders: # SPI GPIO expanders:
# #
# CONFIG_GPIO_MAX7301 is not set
# CONFIG_GPIO_MCP23S08 is not set # CONFIG_GPIO_MCP23S08 is not set
# CONFIG_W1 is not set # CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set # CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set # CONFIG_HWMON is not set
# CONFIG_THERMAL is not set # CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set # CONFIG_WATCHDOG_NOWAYOUT is not set
@ -685,6 +717,7 @@ CONFIG_SSB_POSSIBLE=y
# #
# Multifunction device drivers # Multifunction device drivers
# #
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set # CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set # CONFIG_HTC_PASIC3 is not set
@ -716,10 +749,6 @@ CONFIG_SSB_POSSIBLE=y
# Display device support # Display device support
# #
# CONFIG_DISPLAY_SUPPORT is not set # CONFIG_DISPLAY_SUPPORT is not set
#
# Sound
#
# CONFIG_SOUND is not set # CONFIG_SOUND is not set
CONFIG_USB_SUPPORT=y CONFIG_USB_SUPPORT=y
# CONFIG_USB_ARCH_HAS_HCD is not set # CONFIG_USB_ARCH_HAS_HCD is not set
@ -740,7 +769,7 @@ CONFIG_USB_GADGET_ATMEL_USBA=y
CONFIG_USB_ATMEL_USBA=y CONFIG_USB_ATMEL_USBA=y
# CONFIG_USB_GADGET_FSL_USB2 is not set # CONFIG_USB_GADGET_FSL_USB2 is not set
# CONFIG_USB_GADGET_NET2280 is not set # CONFIG_USB_GADGET_NET2280 is not set
# CONFIG_USB_GADGET_PXA2XX is not set # CONFIG_USB_GADGET_PXA25X is not set
# CONFIG_USB_GADGET_M66592 is not set # CONFIG_USB_GADGET_M66592 is not set
# CONFIG_USB_GADGET_PXA27X is not set # CONFIG_USB_GADGET_PXA27X is not set
# CONFIG_USB_GADGET_GOKU is not set # CONFIG_USB_GADGET_GOKU is not set
@ -759,21 +788,24 @@ CONFIG_USB_FILE_STORAGE=m
CONFIG_USB_G_SERIAL=m CONFIG_USB_G_SERIAL=m
# CONFIG_USB_MIDI_GADGET is not set # CONFIG_USB_MIDI_GADGET is not set
# CONFIG_USB_G_PRINTER is not set # CONFIG_USB_G_PRINTER is not set
CONFIG_MMC=m CONFIG_USB_CDC_COMPOSITE=m
CONFIG_MMC=y
# CONFIG_MMC_DEBUG is not set # CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not set # CONFIG_MMC_UNSAFE_RESUME is not set
# #
# MMC/SD Card Drivers # MMC/SD Card Drivers
# #
CONFIG_MMC_BLOCK=m CONFIG_MMC_BLOCK=y
CONFIG_MMC_BLOCK_BOUNCE=y CONFIG_MMC_BLOCK_BOUNCE=y
# CONFIG_SDIO_UART is not set # CONFIG_SDIO_UART is not set
# CONFIG_MMC_TEST is not set CONFIG_MMC_TEST=m
# #
# MMC/SD Host Controller Drivers # MMC/SD Host Controller Drivers
# #
# CONFIG_MMC_SDHCI is not set
CONFIG_MMC_ATMELMCI=y
CONFIG_MMC_SPI=m CONFIG_MMC_SPI=m
# CONFIG_MEMSTICK is not set # CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y CONFIG_NEW_LEDS=y
@ -783,6 +815,7 @@ CONFIG_LEDS_CLASS=y
# LED drivers # LED drivers
# #
CONFIG_LEDS_GPIO=y CONFIG_LEDS_GPIO=y
# CONFIG_LEDS_PCA955X is not set
# #
# LED Triggers # LED Triggers
@ -821,10 +854,13 @@ CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set # CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# #
# SPI RTC drivers # SPI RTC drivers
# #
# CONFIG_RTC_DRV_M41T94 is not set
# CONFIG_RTC_DRV_DS1305 is not set
# CONFIG_RTC_DRV_MAX6902 is not set # CONFIG_RTC_DRV_MAX6902 is not set
# CONFIG_RTC_DRV_R9701 is not set # CONFIG_RTC_DRV_R9701 is not set
# CONFIG_RTC_DRV_RS5C348 is not set # CONFIG_RTC_DRV_RS5C348 is not set
@ -844,6 +880,19 @@ CONFIG_RTC_INTF_DEV=y
# on-CPU RTC drivers # on-CPU RTC drivers
# #
CONFIG_RTC_DRV_AT32AP700X=y CONFIG_RTC_DRV_AT32AP700X=y
CONFIG_DMADEVICES=y
#
# DMA Devices
#
CONFIG_DW_DMAC=y
CONFIG_DMA_ENGINE=y
#
# DMA Clients
#
# CONFIG_NET_DMA is not set
CONFIG_DMATEST=m
# CONFIG_UIO is not set # CONFIG_UIO is not set
# #
@ -921,6 +970,7 @@ CONFIG_JFFS2_RTIME=y
# CONFIG_CRAMFS is not set # CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set # CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set # CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set # CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set # CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set # CONFIG_ROMFS_FS is not set
@ -931,17 +981,16 @@ CONFIG_NFS_FS=y
CONFIG_NFS_V3=y CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set # CONFIG_NFS_V4 is not set
CONFIG_ROOT_NFS=y
CONFIG_NFSD=m CONFIG_NFSD=m
CONFIG_NFSD_V3=y CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set # CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set # CONFIG_NFSD_V4 is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m CONFIG_EXPORTFS=m
CONFIG_NFS_COMMON=y CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y CONFIG_SUNRPC=y
# CONFIG_SUNRPC_BIND34 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m CONFIG_SMB_FS=m
@ -1017,6 +1066,8 @@ CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_KERNEL=y CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set # CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set # CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set # CONFIG_TIMER_STATS is not set
@ -1037,6 +1088,7 @@ CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_WRITECOUNT is not set # CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_SG is not set
CONFIG_FRAME_POINTER=y CONFIG_FRAME_POINTER=y
@ -1101,6 +1153,10 @@ CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not set
CONFIG_CRYPTO_SHA1=y CONFIG_CRYPTO_SHA1=y
# CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set # CONFIG_CRYPTO_SHA512 is not set
@ -1141,12 +1197,14 @@ CONFIG_BITREVERSE=y
# CONFIG_GENERIC_FIND_NEXT_BIT is not set # CONFIG_GENERIC_FIND_NEXT_BIT is not set
CONFIG_CRC_CCITT=m CONFIG_CRC_CCITT=m
# CONFIG_CRC16 is not set # CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
CONFIG_CRC_ITU_T=m CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y CONFIG_CRC32=y
CONFIG_CRC7=m CONFIG_CRC7=m
# CONFIG_LIBCRC32C is not set # CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y CONFIG_ZLIB_DEFLATE=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_PLIST=y CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y CONFIG_HAS_IOPORT=y

View File

@ -1,7 +1,7 @@
# #
# Automatically generated make config: don't edit # Automatically generated make config: don't edit
# Linux kernel version: 2.6.26-rc3 # Linux kernel version: 2.6.27-rc1
# Mon May 26 13:30:20 2008 # Mon Aug 4 16:02:27 2008
# #
CONFIG_AVR32=y CONFIG_AVR32=y
CONFIG_GENERIC_GPIO=y CONFIG_GENERIC_GPIO=y
@ -77,10 +77,16 @@ CONFIG_PROFILING=y
CONFIG_OPROFILE=m CONFIG_OPROFILE=m
CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y CONFIG_KPROBES=y
# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
# CONFIG_HAVE_IOREMAP_PROT is not set
CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KPROBES=y
# CONFIG_HAVE_KRETPROBES is not set # CONFIG_HAVE_KRETPROBES is not set
# CONFIG_HAVE_ARCH_TRACEHOOK is not set
# CONFIG_HAVE_DMA_ATTRS is not set # CONFIG_HAVE_DMA_ATTRS is not set
# CONFIG_USE_GENERIC_SMP_HELPERS is not set
CONFIG_HAVE_CLK=y
CONFIG_PROC_PAGE_MONITOR=y CONFIG_PROC_PAGE_MONITOR=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set # CONFIG_TINY_SHMEM is not set
@ -91,12 +97,13 @@ CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set # CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set # CONFIG_MODULE_SRCVERSION_ALL is not set
# CONFIG_KMOD is not set CONFIG_KMOD=y
CONFIG_BLOCK=y CONFIG_BLOCK=y
# CONFIG_LBD is not set # CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set # CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# #
# IO Schedulers # IO Schedulers
@ -130,6 +137,7 @@ CONFIG_BOARD_ATSTK1000=y
CONFIG_BOARD_ATSTK1002=y CONFIG_BOARD_ATSTK1002=y
# CONFIG_BOARD_ATSTK1003 is not set # CONFIG_BOARD_ATSTK1003 is not set
# CONFIG_BOARD_ATSTK1004 is not set # CONFIG_BOARD_ATSTK1004 is not set
# CONFIG_BOARD_ATSTK1006 is not set
# CONFIG_BOARD_ATSTK100X_CUSTOM is not set # CONFIG_BOARD_ATSTK100X_CUSTOM is not set
# CONFIG_BOARD_ATSTK100X_SPI1 is not set # CONFIG_BOARD_ATSTK100X_SPI1 is not set
# CONFIG_BOARD_ATSTK1000_J2_LED is not set # CONFIG_BOARD_ATSTK1000_J2_LED is not set
@ -150,6 +158,7 @@ CONFIG_PHYS_OFFSET=0x10000000
CONFIG_PREEMPT_NONE=y CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set # CONFIG_PREEMPT is not set
CONFIG_QUICKLIST=y
# CONFIG_HAVE_ARCH_BOOTMEM_NODE is not set # CONFIG_HAVE_ARCH_BOOTMEM_NODE is not set
# CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set # CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set
# CONFIG_NEED_NODE_MEMMAP_SIZE is not set # CONFIG_NEED_NODE_MEMMAP_SIZE is not set
@ -168,6 +177,7 @@ CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set # CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0 CONFIG_ZONE_DMA_FLAG=0
CONFIG_NR_QUICK=2
CONFIG_VIRT_TO_BUS=y CONFIG_VIRT_TO_BUS=y
# CONFIG_OWNERSHIP_TRACE is not set # CONFIG_OWNERSHIP_TRACE is not set
CONFIG_NMI_DEBUGGING=y CONFIG_NMI_DEBUGGING=y
@ -182,6 +192,12 @@ CONFIG_CMDLINE=""
# #
# Power management options # Power management options
# #
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
CONFIG_PM_SLEEP=y
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# #
# CPU Frequency scaling # CPU Frequency scaling
@ -213,10 +229,6 @@ CONFIG_CPU_FREQ_AT32AP=y
# #
CONFIG_BINFMT_ELF=y CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set # CONFIG_BINFMT_MISC is not set
#
# Networking
#
CONFIG_NET=y CONFIG_NET=y
# #
@ -230,6 +242,7 @@ CONFIG_XFRM_USER=m
# CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set # CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set # CONFIG_XFRM_STATISTICS is not set
CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=m CONFIG_NET_KEY=m
# CONFIG_NET_KEY_MIGRATE is not set # CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y CONFIG_INET=y
@ -284,6 +297,7 @@ CONFIG_IPV6_TUNNEL=m
# CONFIG_IP_SCTP is not set # CONFIG_IP_SCTP is not set
# CONFIG_TIPC is not set # CONFIG_TIPC is not set
# CONFIG_ATM is not set # CONFIG_ATM is not set
CONFIG_STP=m
CONFIG_BRIDGE=m CONFIG_BRIDGE=m
# CONFIG_VLAN_8021Q is not set # CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set # CONFIG_DECNET is not set
@ -474,6 +488,7 @@ CONFIG_SCSI_WAIT_SCAN=m
# CONFIG_SCSI_SAS_LIBSAS is not set # CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set # CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set # CONFIG_SCSI_LOWLEVEL is not set
# CONFIG_SCSI_DH is not set
CONFIG_ATA=m CONFIG_ATA=m
# CONFIG_ATA_NONSTANDARD is not set # CONFIG_ATA_NONSTANDARD is not set
# CONFIG_SATA_PMP is not set # CONFIG_SATA_PMP is not set
@ -483,7 +498,6 @@ CONFIG_PATA_AT32=m
# CONFIG_PATA_PLATFORM is not set # CONFIG_PATA_PLATFORM is not set
# CONFIG_MD is not set # CONFIG_MD is not set
CONFIG_NETDEVICES=y CONFIG_NETDEVICES=y
# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_DUMMY is not set # CONFIG_DUMMY is not set
# CONFIG_BONDING is not set # CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set # CONFIG_MACVLAN is not set
@ -625,21 +639,35 @@ CONFIG_I2C_ALGOBIT=m
# #
# I2C Hardware Bus support # I2C Hardware Bus support
# #
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
CONFIG_I2C_GPIO=m CONFIG_I2C_GPIO=m
# CONFIG_I2C_OCORES is not set # CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_SIMTEC is not set # CONFIG_I2C_SIMTEC is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set # CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_STUB is not set
#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set # CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
# #
# Miscellaneous I2C Chip support # Miscellaneous I2C Chip support
# #
# CONFIG_DS1682 is not set # CONFIG_DS1682 is not set
CONFIG_AT24=m
# CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set # CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_PCF8591 is not set
# CONFIG_TPS65010 is not set # CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_MAX6875 is not set
@ -664,27 +692,32 @@ CONFIG_SPI_ATMEL=y
# CONFIG_SPI_AT25 is not set # CONFIG_SPI_AT25 is not set
CONFIG_SPI_SPIDEV=m CONFIG_SPI_SPIDEV=m
# CONFIG_SPI_TLE62X0 is not set # CONFIG_SPI_TLE62X0 is not set
CONFIG_HAVE_GPIO_LIB=y CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_GPIOLIB=y
#
# GPIO Support
#
# CONFIG_DEBUG_GPIO is not set # CONFIG_DEBUG_GPIO is not set
CONFIG_GPIO_SYSFS=y
# #
# I2C GPIO expanders: # I2C GPIO expanders:
# #
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCA953X is not set # CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCF857X is not set # CONFIG_GPIO_PCF857X is not set
#
# PCI GPIO expanders:
#
# #
# SPI GPIO expanders: # SPI GPIO expanders:
# #
# CONFIG_GPIO_MAX7301 is not set
# CONFIG_GPIO_MCP23S08 is not set # CONFIG_GPIO_MCP23S08 is not set
# CONFIG_W1 is not set # CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set # CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set # CONFIG_HWMON is not set
# CONFIG_THERMAL is not set # CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set # CONFIG_WATCHDOG_NOWAYOUT is not set
@ -703,6 +736,7 @@ CONFIG_SSB_POSSIBLE=y
# #
# Multifunction device drivers # Multifunction device drivers
# #
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set # CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set # CONFIG_HTC_PASIC3 is not set
@ -754,6 +788,9 @@ CONFIG_FB_ATMEL=y
CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y CONFIG_LCD_CLASS_DEVICE=y
CONFIG_LCD_LTV350QV=y CONFIG_LCD_LTV350QV=y
# CONFIG_LCD_ILI9320 is not set
# CONFIG_LCD_VGG2432A4 is not set
# CONFIG_LCD_PLATFORM is not set
# CONFIG_BACKLIGHT_CLASS_DEVICE is not set # CONFIG_BACKLIGHT_CLASS_DEVICE is not set
# #
@ -761,15 +798,7 @@ CONFIG_LCD_LTV350QV=y
# #
# CONFIG_DISPLAY_SUPPORT is not set # CONFIG_DISPLAY_SUPPORT is not set
# CONFIG_LOGO is not set # CONFIG_LOGO is not set
#
# Sound
#
CONFIG_SOUND=m CONFIG_SOUND=m
#
# Advanced Linux Sound Architecture
#
CONFIG_SND=m CONFIG_SND=m
CONFIG_SND_TIMER=m CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m CONFIG_SND_PCM=m
@ -783,37 +812,11 @@ CONFIG_SND_PCM_OSS_PLUGINS=y
# CONFIG_SND_VERBOSE_PROCFS is not set # CONFIG_SND_VERBOSE_PROCFS is not set
# CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set # CONFIG_SND_DEBUG is not set
# CONFIG_SND_DRIVERS is not set
# CONFIG_SND_SPI=y
# Generic devices
#
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
#
# SPI devices
#
CONFIG_SND_AT73C213=m CONFIG_SND_AT73C213=m
CONFIG_SND_AT73C213_TARGET_BITRATE=48000 CONFIG_SND_AT73C213_TARGET_BITRATE=48000
#
# System on Chip audio support
#
# CONFIG_SND_SOC is not set # CONFIG_SND_SOC is not set
#
# ALSA SoC audio for Freescale SOCs
#
#
# SoC Audio for the Texas Instruments OMAP
#
#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set # CONFIG_SOUND_PRIME is not set
# CONFIG_HID_SUPPORT is not set # CONFIG_HID_SUPPORT is not set
CONFIG_USB_SUPPORT=y CONFIG_USB_SUPPORT=y
@ -836,7 +839,7 @@ CONFIG_USB_GADGET_ATMEL_USBA=y
CONFIG_USB_ATMEL_USBA=y CONFIG_USB_ATMEL_USBA=y
# CONFIG_USB_GADGET_FSL_USB2 is not set # CONFIG_USB_GADGET_FSL_USB2 is not set
# CONFIG_USB_GADGET_NET2280 is not set # CONFIG_USB_GADGET_NET2280 is not set
# CONFIG_USB_GADGET_PXA2XX is not set # CONFIG_USB_GADGET_PXA25X is not set
# CONFIG_USB_GADGET_M66592 is not set # CONFIG_USB_GADGET_M66592 is not set
# CONFIG_USB_GADGET_PXA27X is not set # CONFIG_USB_GADGET_PXA27X is not set
# CONFIG_USB_GADGET_GOKU is not set # CONFIG_USB_GADGET_GOKU is not set
@ -855,21 +858,24 @@ CONFIG_USB_FILE_STORAGE=m
CONFIG_USB_G_SERIAL=m CONFIG_USB_G_SERIAL=m
# CONFIG_USB_MIDI_GADGET is not set # CONFIG_USB_MIDI_GADGET is not set
# CONFIG_USB_G_PRINTER is not set # CONFIG_USB_G_PRINTER is not set
CONFIG_MMC=m CONFIG_USB_CDC_COMPOSITE=m
CONFIG_MMC=y
# CONFIG_MMC_DEBUG is not set # CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not set # CONFIG_MMC_UNSAFE_RESUME is not set
# #
# MMC/SD Card Drivers # MMC/SD Card Drivers
# #
CONFIG_MMC_BLOCK=m CONFIG_MMC_BLOCK=y
CONFIG_MMC_BLOCK_BOUNCE=y CONFIG_MMC_BLOCK_BOUNCE=y
# CONFIG_SDIO_UART is not set # CONFIG_SDIO_UART is not set
CONFIG_MMC_TEST=m # CONFIG_MMC_TEST is not set
# #
# MMC/SD Host Controller Drivers # MMC/SD Host Controller Drivers
# #
# CONFIG_MMC_SDHCI is not set
CONFIG_MMC_ATMELMCI=y
CONFIG_MMC_SPI=m CONFIG_MMC_SPI=m
# CONFIG_MEMSTICK is not set # CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y CONFIG_NEW_LEDS=y
@ -879,7 +885,9 @@ CONFIG_LEDS_CLASS=m
# LED drivers # LED drivers
# #
CONFIG_LEDS_ATMEL_PWM=m CONFIG_LEDS_ATMEL_PWM=m
# CONFIG_LEDS_PCA9532 is not set
CONFIG_LEDS_GPIO=m CONFIG_LEDS_GPIO=m
# CONFIG_LEDS_PCA955X is not set
# #
# LED Triggers # LED Triggers
@ -918,10 +926,13 @@ CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set # CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# #
# SPI RTC drivers # SPI RTC drivers
# #
# CONFIG_RTC_DRV_M41T94 is not set
# CONFIG_RTC_DRV_DS1305 is not set
# CONFIG_RTC_DRV_MAX6902 is not set # CONFIG_RTC_DRV_MAX6902 is not set
# CONFIG_RTC_DRV_R9701 is not set # CONFIG_RTC_DRV_R9701 is not set
# CONFIG_RTC_DRV_RS5C348 is not set # CONFIG_RTC_DRV_RS5C348 is not set
@ -941,18 +952,31 @@ CONFIG_RTC_INTF_DEV=y
# on-CPU RTC drivers # on-CPU RTC drivers
# #
CONFIG_RTC_DRV_AT32AP700X=y CONFIG_RTC_DRV_AT32AP700X=y
CONFIG_DMADEVICES=y
#
# DMA Devices
#
CONFIG_DW_DMAC=y
CONFIG_DMA_ENGINE=y
#
# DMA Clients
#
# CONFIG_NET_DMA is not set
CONFIG_DMATEST=m
# CONFIG_UIO is not set # CONFIG_UIO is not set
# #
# File systems # File systems
# #
CONFIG_EXT2_FS=m CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set # CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=m CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set # CONFIG_EXT3_FS_XATTR is not set
# CONFIG_EXT4DEV_FS is not set # CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=m CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set # CONFIG_JBD_DEBUG is not set
# CONFIG_REISERFS_FS is not set # CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set # CONFIG_JFS_FS is not set
@ -1018,6 +1042,7 @@ CONFIG_JFFS2_RTIME=y
# CONFIG_CRAMFS is not set # CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set # CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=m CONFIG_MINIX_FS=m
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set # CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set # CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set # CONFIG_ROMFS_FS is not set
@ -1028,13 +1053,12 @@ CONFIG_NFS_FS=y
CONFIG_NFS_V3=y CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set # CONFIG_NFS_V4 is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y CONFIG_ROOT_NFS=y
# CONFIG_NFSD is not set
CONFIG_LOCKD=y CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y CONFIG_SUNRPC=y
# CONFIG_SUNRPC_BIND34 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set # CONFIG_SMB_FS is not set
@ -1104,6 +1128,8 @@ CONFIG_DEBUG_FS=y
CONFIG_DEBUG_KERNEL=y CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set # CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set # CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set # CONFIG_TIMER_STATS is not set
@ -1124,6 +1150,7 @@ CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_WRITECOUNT is not set # CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_SG is not set
CONFIG_FRAME_POINTER=y CONFIG_FRAME_POINTER=y
@ -1188,6 +1215,10 @@ CONFIG_CRYPTO_HMAC=m
# CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=m CONFIG_CRYPTO_MD5=m
# CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not set
CONFIG_CRYPTO_SHA1=m CONFIG_CRYPTO_SHA1=m
# CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set # CONFIG_CRYPTO_SHA512 is not set
@ -1228,12 +1259,14 @@ CONFIG_BITREVERSE=y
# CONFIG_GENERIC_FIND_NEXT_BIT is not set # CONFIG_GENERIC_FIND_NEXT_BIT is not set
CONFIG_CRC_CCITT=m CONFIG_CRC_CCITT=m
# CONFIG_CRC16 is not set # CONFIG_CRC16 is not set
CONFIG_CRC_T10DIF=m
CONFIG_CRC_ITU_T=m CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y CONFIG_CRC32=y
CONFIG_CRC7=m CONFIG_CRC7=m
# CONFIG_LIBCRC32C is not set # CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y CONFIG_ZLIB_DEFLATE=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_PLIST=y CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y CONFIG_HAS_IOPORT=y

View File

@ -1,7 +1,7 @@
# #
# Automatically generated make config: don't edit # Automatically generated make config: don't edit
# Linux kernel version: 2.6.26-rc3 # Linux kernel version: 2.6.27-rc1
# Mon May 26 13:33:05 2008 # Tue Aug 5 15:34:44 2008
# #
CONFIG_AVR32=y CONFIG_AVR32=y
CONFIG_GENERIC_GPIO=y CONFIG_GENERIC_GPIO=y
@ -80,10 +80,16 @@ CONFIG_PROFILING=y
CONFIG_OPROFILE=m CONFIG_OPROFILE=m
CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y CONFIG_KPROBES=y
# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
# CONFIG_HAVE_IOREMAP_PROT is not set
CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KPROBES=y
# CONFIG_HAVE_KRETPROBES is not set # CONFIG_HAVE_KRETPROBES is not set
# CONFIG_HAVE_ARCH_TRACEHOOK is not set
# CONFIG_HAVE_DMA_ATTRS is not set # CONFIG_HAVE_DMA_ATTRS is not set
# CONFIG_USE_GENERIC_SMP_HELPERS is not set
CONFIG_HAVE_CLK=y
CONFIG_PROC_PAGE_MONITOR=y CONFIG_PROC_PAGE_MONITOR=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_RT_MUTEXES=y CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set # CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=1 CONFIG_BASE_SMALL=1
@ -93,12 +99,13 @@ CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set # CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set # CONFIG_MODULE_SRCVERSION_ALL is not set
# CONFIG_KMOD is not set CONFIG_KMOD=y
CONFIG_BLOCK=y CONFIG_BLOCK=y
# CONFIG_LBD is not set # CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set # CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# #
# IO Schedulers # IO Schedulers
@ -132,6 +139,7 @@ CONFIG_BOARD_ATSTK1000=y
# CONFIG_BOARD_ATSTK1002 is not set # CONFIG_BOARD_ATSTK1002 is not set
CONFIG_BOARD_ATSTK1003=y CONFIG_BOARD_ATSTK1003=y
# CONFIG_BOARD_ATSTK1004 is not set # CONFIG_BOARD_ATSTK1004 is not set
# CONFIG_BOARD_ATSTK1006 is not set
# CONFIG_BOARD_ATSTK100X_CUSTOM is not set # CONFIG_BOARD_ATSTK100X_CUSTOM is not set
# CONFIG_BOARD_ATSTK100X_SPI1 is not set # CONFIG_BOARD_ATSTK100X_SPI1 is not set
# CONFIG_BOARD_ATSTK1000_J2_LED is not set # CONFIG_BOARD_ATSTK1000_J2_LED is not set
@ -152,6 +160,7 @@ CONFIG_PHYS_OFFSET=0x10000000
CONFIG_PREEMPT_NONE=y CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set # CONFIG_PREEMPT is not set
CONFIG_QUICKLIST=y
# CONFIG_HAVE_ARCH_BOOTMEM_NODE is not set # CONFIG_HAVE_ARCH_BOOTMEM_NODE is not set
# CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set # CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set
# CONFIG_NEED_NODE_MEMMAP_SIZE is not set # CONFIG_NEED_NODE_MEMMAP_SIZE is not set
@ -170,6 +179,7 @@ CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set # CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0 CONFIG_ZONE_DMA_FLAG=0
CONFIG_NR_QUICK=2
CONFIG_VIRT_TO_BUS=y CONFIG_VIRT_TO_BUS=y
# CONFIG_OWNERSHIP_TRACE is not set # CONFIG_OWNERSHIP_TRACE is not set
CONFIG_NMI_DEBUGGING=y CONFIG_NMI_DEBUGGING=y
@ -184,6 +194,12 @@ CONFIG_CMDLINE=""
# #
# Power management options # Power management options
# #
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
CONFIG_PM_SLEEP=y
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# #
# CPU Frequency scaling # CPU Frequency scaling
@ -215,10 +231,6 @@ CONFIG_CPU_FREQ_AT32AP=y
# #
CONFIG_BINFMT_ELF=y CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set # CONFIG_BINFMT_MISC is not set
#
# Networking
#
CONFIG_NET=y CONFIG_NET=y
# #
@ -449,6 +461,7 @@ CONFIG_SCSI_WAIT_SCAN=m
CONFIG_SCSI_LOWLEVEL=y CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set # CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_DH is not set
CONFIG_ATA=m CONFIG_ATA=m
# CONFIG_ATA_NONSTANDARD is not set # CONFIG_ATA_NONSTANDARD is not set
# CONFIG_SATA_PMP is not set # CONFIG_SATA_PMP is not set
@ -458,7 +471,6 @@ CONFIG_PATA_AT32=m
# CONFIG_PATA_PLATFORM is not set # CONFIG_PATA_PLATFORM is not set
# CONFIG_MD is not set # CONFIG_MD is not set
CONFIG_NETDEVICES=y CONFIG_NETDEVICES=y
# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_DUMMY is not set # CONFIG_DUMMY is not set
# CONFIG_BONDING is not set # CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set # CONFIG_MACVLAN is not set
@ -575,21 +587,35 @@ CONFIG_I2C_ALGOBIT=m
# #
# I2C Hardware Bus support # I2C Hardware Bus support
# #
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
CONFIG_I2C_GPIO=m CONFIG_I2C_GPIO=m
# CONFIG_I2C_OCORES is not set # CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_SIMTEC is not set # CONFIG_I2C_SIMTEC is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set # CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_STUB is not set
#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set # CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
# #
# Miscellaneous I2C Chip support # Miscellaneous I2C Chip support
# #
# CONFIG_DS1682 is not set # CONFIG_DS1682 is not set
CONFIG_AT24=m
# CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set # CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_PCF8591 is not set
# CONFIG_TPS65010 is not set # CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_MAX6875 is not set
@ -614,27 +640,32 @@ CONFIG_SPI_ATMEL=y
# CONFIG_SPI_AT25 is not set # CONFIG_SPI_AT25 is not set
CONFIG_SPI_SPIDEV=m CONFIG_SPI_SPIDEV=m
# CONFIG_SPI_TLE62X0 is not set # CONFIG_SPI_TLE62X0 is not set
CONFIG_HAVE_GPIO_LIB=y CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_GPIOLIB=y
#
# GPIO Support
#
# CONFIG_DEBUG_GPIO is not set # CONFIG_DEBUG_GPIO is not set
CONFIG_GPIO_SYSFS=y
# #
# I2C GPIO expanders: # I2C GPIO expanders:
# #
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCA953X is not set # CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCF857X is not set # CONFIG_GPIO_PCF857X is not set
#
# PCI GPIO expanders:
#
# #
# SPI GPIO expanders: # SPI GPIO expanders:
# #
# CONFIG_GPIO_MAX7301 is not set
# CONFIG_GPIO_MCP23S08 is not set # CONFIG_GPIO_MCP23S08 is not set
# CONFIG_W1 is not set # CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set # CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set # CONFIG_HWMON is not set
# CONFIG_THERMAL is not set # CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set # CONFIG_WATCHDOG_NOWAYOUT is not set
@ -653,6 +684,7 @@ CONFIG_SSB_POSSIBLE=y
# #
# Multifunction device drivers # Multifunction device drivers
# #
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set # CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set # CONFIG_HTC_PASIC3 is not set
@ -684,15 +716,7 @@ CONFIG_SSB_POSSIBLE=y
# Display device support # Display device support
# #
# CONFIG_DISPLAY_SUPPORT is not set # CONFIG_DISPLAY_SUPPORT is not set
#
# Sound
#
CONFIG_SOUND=m CONFIG_SOUND=m
#
# Advanced Linux Sound Architecture
#
CONFIG_SND=m CONFIG_SND=m
CONFIG_SND_TIMER=m CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m CONFIG_SND_PCM=m
@ -706,37 +730,11 @@ CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set # CONFIG_SND_DEBUG is not set
# CONFIG_SND_DRIVERS is not set
# CONFIG_SND_SPI=y
# Generic devices
#
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
#
# SPI devices
#
CONFIG_SND_AT73C213=m CONFIG_SND_AT73C213=m
CONFIG_SND_AT73C213_TARGET_BITRATE=48000 CONFIG_SND_AT73C213_TARGET_BITRATE=48000
#
# System on Chip audio support
#
# CONFIG_SND_SOC is not set # CONFIG_SND_SOC is not set
#
# ALSA SoC audio for Freescale SOCs
#
#
# SoC Audio for the Texas Instruments OMAP
#
#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set # CONFIG_SOUND_PRIME is not set
# CONFIG_HID_SUPPORT is not set # CONFIG_HID_SUPPORT is not set
CONFIG_USB_SUPPORT=y CONFIG_USB_SUPPORT=y
@ -759,7 +757,7 @@ CONFIG_USB_GADGET_ATMEL_USBA=y
CONFIG_USB_ATMEL_USBA=y CONFIG_USB_ATMEL_USBA=y
# CONFIG_USB_GADGET_FSL_USB2 is not set # CONFIG_USB_GADGET_FSL_USB2 is not set
# CONFIG_USB_GADGET_NET2280 is not set # CONFIG_USB_GADGET_NET2280 is not set
# CONFIG_USB_GADGET_PXA2XX is not set # CONFIG_USB_GADGET_PXA25X is not set
# CONFIG_USB_GADGET_M66592 is not set # CONFIG_USB_GADGET_M66592 is not set
# CONFIG_USB_GADGET_PXA27X is not set # CONFIG_USB_GADGET_PXA27X is not set
# CONFIG_USB_GADGET_GOKU is not set # CONFIG_USB_GADGET_GOKU is not set
@ -778,21 +776,24 @@ CONFIG_USB_FILE_STORAGE=m
CONFIG_USB_G_SERIAL=m CONFIG_USB_G_SERIAL=m
# CONFIG_USB_MIDI_GADGET is not set # CONFIG_USB_MIDI_GADGET is not set
# CONFIG_USB_G_PRINTER is not set # CONFIG_USB_G_PRINTER is not set
CONFIG_MMC=m CONFIG_USB_CDC_COMPOSITE=m
CONFIG_MMC=y
# CONFIG_MMC_DEBUG is not set # CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not set # CONFIG_MMC_UNSAFE_RESUME is not set
# #
# MMC/SD Card Drivers # MMC/SD Card Drivers
# #
CONFIG_MMC_BLOCK=m CONFIG_MMC_BLOCK=y
# CONFIG_MMC_BLOCK_BOUNCE is not set CONFIG_MMC_BLOCK_BOUNCE=y
# CONFIG_SDIO_UART is not set # CONFIG_SDIO_UART is not set
# CONFIG_MMC_TEST is not set CONFIG_MMC_TEST=m
# #
# MMC/SD Host Controller Drivers # MMC/SD Host Controller Drivers
# #
# CONFIG_MMC_SDHCI is not set
CONFIG_MMC_ATMELMCI=y
CONFIG_MMC_SPI=m CONFIG_MMC_SPI=m
# CONFIG_MEMSTICK is not set # CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y CONFIG_NEW_LEDS=y
@ -802,7 +803,9 @@ CONFIG_LEDS_CLASS=y
# LED drivers # LED drivers
# #
CONFIG_LEDS_ATMEL_PWM=m CONFIG_LEDS_ATMEL_PWM=m
# CONFIG_LEDS_PCA9532 is not set
CONFIG_LEDS_GPIO=y CONFIG_LEDS_GPIO=y
# CONFIG_LEDS_PCA955X is not set
# #
# LED Triggers # LED Triggers
@ -841,10 +844,13 @@ CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set # CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# #
# SPI RTC drivers # SPI RTC drivers
# #
# CONFIG_RTC_DRV_M41T94 is not set
# CONFIG_RTC_DRV_DS1305 is not set
# CONFIG_RTC_DRV_MAX6902 is not set # CONFIG_RTC_DRV_MAX6902 is not set
# CONFIG_RTC_DRV_R9701 is not set # CONFIG_RTC_DRV_R9701 is not set
# CONFIG_RTC_DRV_RS5C348 is not set # CONFIG_RTC_DRV_RS5C348 is not set
@ -864,8 +870,20 @@ CONFIG_RTC_INTF_DEV=y
# on-CPU RTC drivers # on-CPU RTC drivers
# #
CONFIG_RTC_DRV_AT32AP700X=y CONFIG_RTC_DRV_AT32AP700X=y
CONFIG_UIO=m CONFIG_DMADEVICES=y
# CONFIG_UIO_SMX is not set
#
# DMA Devices
#
CONFIG_DW_DMAC=y
CONFIG_DMA_ENGINE=y
#
# DMA Clients
#
# CONFIG_NET_DMA is not set
CONFIG_DMATEST=m
# CONFIG_UIO is not set
# #
# File systems # File systems
@ -943,6 +961,7 @@ CONFIG_JFFS2_RTIME=y
# CONFIG_CRAMFS is not set # CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set # CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set # CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set # CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set # CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set # CONFIG_ROMFS_FS is not set
@ -1011,6 +1030,8 @@ CONFIG_DEBUG_FS=y
CONFIG_DEBUG_KERNEL=y CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set # CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set # CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set # CONFIG_TIMER_STATS is not set
@ -1029,6 +1050,7 @@ CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_WRITECOUNT is not set # CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_SG is not set
CONFIG_FRAME_POINTER=y CONFIG_FRAME_POINTER=y
@ -1056,6 +1078,7 @@ CONFIG_BITREVERSE=y
# CONFIG_GENERIC_FIND_NEXT_BIT is not set # CONFIG_GENERIC_FIND_NEXT_BIT is not set
CONFIG_CRC_CCITT=m CONFIG_CRC_CCITT=m
# CONFIG_CRC16 is not set # CONFIG_CRC16 is not set
CONFIG_CRC_T10DIF=m
CONFIG_CRC_ITU_T=m CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y CONFIG_CRC32=y
CONFIG_CRC7=m CONFIG_CRC7=m
@ -1063,6 +1086,7 @@ CONFIG_CRC7=m
CONFIG_AUDIT_GENERIC=y CONFIG_AUDIT_GENERIC=y
CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y CONFIG_ZLIB_DEFLATE=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_PLIST=y CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y CONFIG_HAS_IOPORT=y

View File

@ -1,7 +1,7 @@
# #
# Automatically generated make config: don't edit # Automatically generated make config: don't edit
# Linux kernel version: 2.6.26-rc3 # Linux kernel version: 2.6.27-rc1
# Mon May 26 13:34:57 2008 # Tue Aug 5 15:38:56 2008
# #
CONFIG_AVR32=y CONFIG_AVR32=y
CONFIG_GENERIC_GPIO=y CONFIG_GENERIC_GPIO=y
@ -69,10 +69,16 @@ CONFIG_SLOB=y
# CONFIG_PROFILING is not set # CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set # CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_OPROFILE=y
# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
# CONFIG_HAVE_IOREMAP_PROT is not set
CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KPROBES=y
# CONFIG_HAVE_KRETPROBES is not set # CONFIG_HAVE_KRETPROBES is not set
# CONFIG_HAVE_ARCH_TRACEHOOK is not set
# CONFIG_HAVE_DMA_ATTRS is not set # CONFIG_HAVE_DMA_ATTRS is not set
# CONFIG_USE_GENERIC_SMP_HELPERS is not set
CONFIG_HAVE_CLK=y
# CONFIG_PROC_PAGE_MONITOR is not set # CONFIG_PROC_PAGE_MONITOR is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
# CONFIG_TINY_SHMEM is not set # CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=1 CONFIG_BASE_SMALL=1
# CONFIG_MODULES is not set # CONFIG_MODULES is not set
@ -97,6 +103,7 @@ CONFIG_BOARD_ATSTK1000=y
# CONFIG_BOARD_ATSTK1002 is not set # CONFIG_BOARD_ATSTK1002 is not set
# CONFIG_BOARD_ATSTK1003 is not set # CONFIG_BOARD_ATSTK1003 is not set
CONFIG_BOARD_ATSTK1004=y CONFIG_BOARD_ATSTK1004=y
# CONFIG_BOARD_ATSTK1006 is not set
# CONFIG_BOARD_ATSTK100X_CUSTOM is not set # CONFIG_BOARD_ATSTK100X_CUSTOM is not set
# CONFIG_BOARD_ATSTK100X_SPI1 is not set # CONFIG_BOARD_ATSTK100X_SPI1 is not set
# CONFIG_BOARD_ATSTK1000_J2_LED is not set # CONFIG_BOARD_ATSTK1000_J2_LED is not set
@ -115,6 +122,7 @@ CONFIG_PHYS_OFFSET=0x10000000
CONFIG_PREEMPT_NONE=y CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set # CONFIG_PREEMPT is not set
CONFIG_QUICKLIST=y
# CONFIG_HAVE_ARCH_BOOTMEM_NODE is not set # CONFIG_HAVE_ARCH_BOOTMEM_NODE is not set
# CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set # CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set
# CONFIG_NEED_NODE_MEMMAP_SIZE is not set # CONFIG_NEED_NODE_MEMMAP_SIZE is not set
@ -133,6 +141,7 @@ CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set # CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0 CONFIG_ZONE_DMA_FLAG=0
CONFIG_NR_QUICK=2
CONFIG_VIRT_TO_BUS=y CONFIG_VIRT_TO_BUS=y
# CONFIG_OWNERSHIP_TRACE is not set # CONFIG_OWNERSHIP_TRACE is not set
# CONFIG_NMI_DEBUGGING is not set # CONFIG_NMI_DEBUGGING is not set
@ -147,6 +156,8 @@ CONFIG_CMDLINE=""
# #
# Power management options # Power management options
# #
# CONFIG_PM is not set
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# #
# CPU Frequency scaling # CPU Frequency scaling
@ -164,10 +175,6 @@ CONFIG_CMDLINE=""
# #
CONFIG_BINFMT_ELF=y CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set # CONFIG_BINFMT_MISC is not set
#
# Networking
#
CONFIG_NET=y CONFIG_NET=y
# #
@ -390,24 +397,28 @@ CONFIG_SPI_ATMEL=y
# CONFIG_SPI_AT25 is not set # CONFIG_SPI_AT25 is not set
# CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set # CONFIG_SPI_TLE62X0 is not set
CONFIG_HAVE_GPIO_LIB=y CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_GPIOLIB=y
# # CONFIG_GPIO_SYSFS is not set
# GPIO Support
#
# #
# I2C GPIO expanders: # I2C GPIO expanders:
# #
#
# PCI GPIO expanders:
#
# #
# SPI GPIO expanders: # SPI GPIO expanders:
# #
# CONFIG_GPIO_MAX7301 is not set
# CONFIG_GPIO_MCP23S08 is not set # CONFIG_GPIO_MCP23S08 is not set
# CONFIG_W1 is not set # CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set # CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set # CONFIG_HWMON is not set
# CONFIG_THERMAL is not set # CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set # CONFIG_WATCHDOG_NOWAYOUT is not set
@ -426,6 +437,7 @@ CONFIG_SSB_POSSIBLE=y
# #
# Multifunction device drivers # Multifunction device drivers
# #
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set # CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set # CONFIG_HTC_PASIC3 is not set
@ -477,6 +489,9 @@ CONFIG_FB_ATMEL=y
CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y CONFIG_LCD_CLASS_DEVICE=y
CONFIG_LCD_LTV350QV=y CONFIG_LCD_LTV350QV=y
# CONFIG_LCD_ILI9320 is not set
# CONFIG_LCD_VGG2432A4 is not set
# CONFIG_LCD_PLATFORM is not set
# CONFIG_BACKLIGHT_CLASS_DEVICE is not set # CONFIG_BACKLIGHT_CLASS_DEVICE is not set
# #
@ -484,10 +499,6 @@ CONFIG_LCD_LTV350QV=y
# #
# CONFIG_DISPLAY_SUPPORT is not set # CONFIG_DISPLAY_SUPPORT is not set
# CONFIG_LOGO is not set # CONFIG_LOGO is not set
#
# Sound
#
# CONFIG_SOUND is not set # CONFIG_SOUND is not set
CONFIG_USB_SUPPORT=y CONFIG_USB_SUPPORT=y
# CONFIG_USB_ARCH_HAS_HCD is not set # CONFIG_USB_ARCH_HAS_HCD is not set
@ -507,7 +518,7 @@ CONFIG_USB_GADGET_ATMEL_USBA=y
CONFIG_USB_ATMEL_USBA=y CONFIG_USB_ATMEL_USBA=y
# CONFIG_USB_GADGET_FSL_USB2 is not set # CONFIG_USB_GADGET_FSL_USB2 is not set
# CONFIG_USB_GADGET_NET2280 is not set # CONFIG_USB_GADGET_NET2280 is not set
# CONFIG_USB_GADGET_PXA2XX is not set # CONFIG_USB_GADGET_PXA25X is not set
# CONFIG_USB_GADGET_M66592 is not set # CONFIG_USB_GADGET_M66592 is not set
# CONFIG_USB_GADGET_PXA27X is not set # CONFIG_USB_GADGET_PXA27X is not set
# CONFIG_USB_GADGET_GOKU is not set # CONFIG_USB_GADGET_GOKU is not set
@ -525,6 +536,7 @@ CONFIG_USB_ETH=y
# CONFIG_USB_G_SERIAL is not set # CONFIG_USB_G_SERIAL is not set
# CONFIG_USB_MIDI_GADGET is not set # CONFIG_USB_MIDI_GADGET is not set
# CONFIG_USB_G_PRINTER is not set # CONFIG_USB_G_PRINTER is not set
# CONFIG_USB_CDC_COMPOSITE is not set
# CONFIG_MMC is not set # CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set # CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set # CONFIG_NEW_LEDS is not set
@ -547,6 +559,8 @@ CONFIG_RTC_INTF_DEV=y
# #
# SPI RTC drivers # SPI RTC drivers
# #
# CONFIG_RTC_DRV_M41T94 is not set
# CONFIG_RTC_DRV_DS1305 is not set
# CONFIG_RTC_DRV_MAX6902 is not set # CONFIG_RTC_DRV_MAX6902 is not set
# CONFIG_RTC_DRV_R9701 is not set # CONFIG_RTC_DRV_R9701 is not set
# CONFIG_RTC_DRV_RS5C348 is not set # CONFIG_RTC_DRV_RS5C348 is not set
@ -566,6 +580,7 @@ CONFIG_RTC_INTF_DEV=y
# on-CPU RTC drivers # on-CPU RTC drivers
# #
CONFIG_RTC_DRV_AT32AP700X=y CONFIG_RTC_DRV_AT32AP700X=y
# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set # CONFIG_UIO is not set
# #
@ -620,6 +635,7 @@ CONFIG_MAGIC_SYSRQ=y
# CONFIG_HEADERS_CHECK is not set # CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_KERNEL is not set
# CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_SAMPLES is not set # CONFIG_SAMPLES is not set
# #
@ -638,12 +654,14 @@ CONFIG_BITREVERSE=y
# CONFIG_GENERIC_FIND_NEXT_BIT is not set # CONFIG_GENERIC_FIND_NEXT_BIT is not set
# CONFIG_CRC_CCITT is not set # CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set # CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set # CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y CONFIG_CRC32=y
# CONFIG_CRC7 is not set # CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set # CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y CONFIG_ZLIB_DEFLATE=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_HAS_IOMEM=y CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y CONFIG_HAS_DMA=y

File diff suppressed because it is too large Load Diff

View File

@ -1,4 +1,5 @@
obj-y += pdc.o clock.o intc.o extint.o pio.o hsmc.o obj-y += pdc.o clock.o intc.o extint.o pio.o hsmc.o
obj-y += hmatrix.o
obj-$(CONFIG_CPU_AT32AP700X) += at32ap700x.o pm-at32ap700x.o obj-$(CONFIG_CPU_AT32AP700X) += at32ap700x.o pm-at32ap700x.o
obj-$(CONFIG_CPU_FREQ_AT32AP) += cpufreq.o obj-$(CONFIG_CPU_FREQ_AT32AP) += cpufreq.o
obj-$(CONFIG_PM) += pm.o obj-$(CONFIG_PM) += pm.o

View File

@ -22,13 +22,13 @@
#include <mach/at32ap700x.h> #include <mach/at32ap700x.h>
#include <mach/board.h> #include <mach/board.h>
#include <mach/hmatrix.h>
#include <mach/portmux.h> #include <mach/portmux.h>
#include <mach/sram.h> #include <mach/sram.h>
#include <video/atmel_lcdc.h> #include <video/atmel_lcdc.h>
#include "clock.h" #include "clock.h"
#include "hmatrix.h"
#include "pio.h" #include "pio.h"
#include "pm.h" #include "pm.h"
@ -725,7 +725,7 @@ static struct clk pico_clk = {
* HMATRIX * HMATRIX
* -------------------------------------------------------------------- */ * -------------------------------------------------------------------- */
static struct clk hmatrix_clk = { struct clk at32_hmatrix_clk = {
.name = "hmatrix_clk", .name = "hmatrix_clk",
.parent = &pbb_clk, .parent = &pbb_clk,
.mode = pbb_clk_mode, .mode = pbb_clk_mode,
@ -733,12 +733,6 @@ static struct clk hmatrix_clk = {
.index = 2, .index = 2,
.users = 1, .users = 1,
}; };
#define HMATRIX_BASE ((void __iomem *)0xfff00800)
#define hmatrix_readl(reg) \
__raw_readl((HMATRIX_BASE) + HMATRIX_##reg)
#define hmatrix_writel(reg,value) \
__raw_writel((value), (HMATRIX_BASE) + HMATRIX_##reg)
/* /*
* Set bits in the HMATRIX Special Function Register (SFR) used by the * Set bits in the HMATRIX Special Function Register (SFR) used by the
@ -748,13 +742,7 @@ static struct clk hmatrix_clk = {
*/ */
static inline void set_ebi_sfr_bits(u32 mask) static inline void set_ebi_sfr_bits(u32 mask)
{ {
u32 sfr; hmatrix_sfr_set_bits(HMATRIX_SLAVE_EBI, mask);
clk_enable(&hmatrix_clk);
sfr = hmatrix_readl(SFR4);
sfr |= mask;
hmatrix_writel(SFR4, sfr);
clk_disable(&hmatrix_clk);
} }
/* -------------------------------------------------------------------- /* --------------------------------------------------------------------
@ -1779,7 +1767,7 @@ static int __init at32_init_ide_or_cf(struct platform_device *pdev,
return ret; return ret;
select_peripheral(PE(21), PERIPH_A, 0); /* NCS4 -> OE_N */ select_peripheral(PE(21), PERIPH_A, 0); /* NCS4 -> OE_N */
set_ebi_sfr_bits(HMATRIX_BIT(CS4A)); hmatrix_sfr_set_bits(HMATRIX_SLAVE_EBI, HMATRIX_EBI_CF0_ENABLE);
break; break;
case 5: case 5:
ret = platform_device_add_resources(pdev, ret = platform_device_add_resources(pdev,
@ -1789,7 +1777,7 @@ static int __init at32_init_ide_or_cf(struct platform_device *pdev,
return ret; return ret;
select_peripheral(PE(22), PERIPH_A, 0); /* NCS5 -> OE_N */ select_peripheral(PE(22), PERIPH_A, 0); /* NCS5 -> OE_N */
set_ebi_sfr_bits(HMATRIX_BIT(CS5A)); hmatrix_sfr_set_bits(HMATRIX_SLAVE_EBI, HMATRIX_EBI_CF1_ENABLE);
break; break;
default: default:
return -EINVAL; return -EINVAL;
@ -1905,7 +1893,7 @@ at32_add_device_nand(unsigned int id, struct atmel_nand_data *data)
sizeof(struct atmel_nand_data))) sizeof(struct atmel_nand_data)))
goto fail; goto fail;
set_ebi_sfr_bits(HMATRIX_BIT(CS3A)); hmatrix_sfr_set_bits(HMATRIX_SLAVE_EBI, HMATRIX_EBI_NAND_ENABLE);
if (data->enable_pin) if (data->enable_pin)
at32_select_gpio(data->enable_pin, at32_select_gpio(data->enable_pin,
AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH); AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH);
@ -2097,7 +2085,7 @@ struct clk *at32_clock_list[] = {
&pbb_clk, &pbb_clk,
&at32_pm_pclk, &at32_pm_pclk,
&at32_intc0_pclk, &at32_intc0_pclk,
&hmatrix_clk, &at32_hmatrix_clk,
&ebi_clk, &ebi_clk,
&hramc_clk, &hramc_clk,
&sdramc_clk, &sdramc_clk,

View File

@ -16,6 +16,8 @@
#include <linux/device.h> #include <linux/device.h>
#include <linux/string.h> #include <linux/string.h>
#include <mach/chip.h>
#include "clock.h" #include "clock.h"
static DEFINE_SPINLOCK(clk_lock); static DEFINE_SPINLOCK(clk_lock);

View File

@ -0,0 +1,88 @@
/*
* High-Speed Bus Matrix helper functions
*
* Copyright (C) 2008 Atmel Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/clk.h>
#include <linux/io.h>
#include <mach/chip.h>
#include <mach/hmatrix.h>
static inline void __hmatrix_write_reg(unsigned long offset, u32 value)
{
__raw_writel(value, (void __iomem __force *)(HMATRIX_BASE + offset));
}
static inline u32 __hmatrix_read_reg(unsigned long offset)
{
return __raw_readl((void __iomem __force *)(HMATRIX_BASE + offset));
}
/**
* hmatrix_write_reg - write HMATRIX configuration register
* @offset: register offset
* @value: value to be written to the register at @offset
*/
void hmatrix_write_reg(unsigned long offset, u32 value)
{
clk_enable(&at32_hmatrix_clk);
__hmatrix_write_reg(offset, value);
__hmatrix_read_reg(offset);
clk_disable(&at32_hmatrix_clk);
}
/**
* hmatrix_read_reg - read HMATRIX configuration register
* @offset: register offset
*
* Returns the value of the register at @offset.
*/
u32 hmatrix_read_reg(unsigned long offset)
{
u32 value;
clk_enable(&at32_hmatrix_clk);
value = __hmatrix_read_reg(offset);
clk_disable(&at32_hmatrix_clk);
return value;
}
/**
* hmatrix_sfr_set_bits - set bits in a slave's Special Function Register
* @slave_id: operate on the SFR belonging to this slave
* @mask: mask of bits to be set in the SFR
*/
void hmatrix_sfr_set_bits(unsigned int slave_id, u32 mask)
{
u32 value;
clk_enable(&at32_hmatrix_clk);
value = __hmatrix_read_reg(HMATRIX_SFR(slave_id));
value |= mask;
__hmatrix_write_reg(HMATRIX_SFR(slave_id), value);
__hmatrix_read_reg(HMATRIX_SFR(slave_id));
clk_disable(&at32_hmatrix_clk);
}
/**
* hmatrix_sfr_set_bits - clear bits in a slave's Special Function Register
* @slave_id: operate on the SFR belonging to this slave
* @mask: mask of bits to be cleared in the SFR
*/
void hmatrix_sfr_clear_bits(unsigned int slave_id, u32 mask)
{
u32 value;
clk_enable(&at32_hmatrix_clk);
value = __hmatrix_read_reg(HMATRIX_SFR(slave_id));
value &= ~mask;
__hmatrix_write_reg(HMATRIX_SFR(slave_id), value);
__hmatrix_read_reg(HMATRIX_SFR(slave_id));
clk_disable(&at32_hmatrix_clk);
}

View File

@ -1,182 +0,0 @@
/*
* Register definitions for High-Speed Bus Matrix
*/
#ifndef __HMATRIX_H
#define __HMATRIX_H
/* HMATRIX register offsets */
#define HMATRIX_MCFG0 0x0000
#define HMATRIX_MCFG1 0x0004
#define HMATRIX_MCFG2 0x0008
#define HMATRIX_MCFG3 0x000c
#define HMATRIX_MCFG4 0x0010
#define HMATRIX_MCFG5 0x0014
#define HMATRIX_MCFG6 0x0018
#define HMATRIX_MCFG7 0x001c
#define HMATRIX_MCFG8 0x0020
#define HMATRIX_MCFG9 0x0024
#define HMATRIX_MCFG10 0x0028
#define HMATRIX_MCFG11 0x002c
#define HMATRIX_MCFG12 0x0030
#define HMATRIX_MCFG13 0x0034
#define HMATRIX_MCFG14 0x0038
#define HMATRIX_MCFG15 0x003c
#define HMATRIX_SCFG0 0x0040
#define HMATRIX_SCFG1 0x0044
#define HMATRIX_SCFG2 0x0048
#define HMATRIX_SCFG3 0x004c
#define HMATRIX_SCFG4 0x0050
#define HMATRIX_SCFG5 0x0054
#define HMATRIX_SCFG6 0x0058
#define HMATRIX_SCFG7 0x005c
#define HMATRIX_SCFG8 0x0060
#define HMATRIX_SCFG9 0x0064
#define HMATRIX_SCFG10 0x0068
#define HMATRIX_SCFG11 0x006c
#define HMATRIX_SCFG12 0x0070
#define HMATRIX_SCFG13 0x0074
#define HMATRIX_SCFG14 0x0078
#define HMATRIX_SCFG15 0x007c
#define HMATRIX_PRAS0 0x0080
#define HMATRIX_PRBS0 0x0084
#define HMATRIX_PRAS1 0x0088
#define HMATRIX_PRBS1 0x008c
#define HMATRIX_PRAS2 0x0090
#define HMATRIX_PRBS2 0x0094
#define HMATRIX_PRAS3 0x0098
#define HMATRIX_PRBS3 0x009c
#define HMATRIX_PRAS4 0x00a0
#define HMATRIX_PRBS4 0x00a4
#define HMATRIX_PRAS5 0x00a8
#define HMATRIX_PRBS5 0x00ac
#define HMATRIX_PRAS6 0x00b0
#define HMATRIX_PRBS6 0x00b4
#define HMATRIX_PRAS7 0x00b8
#define HMATRIX_PRBS7 0x00bc
#define HMATRIX_PRAS8 0x00c0
#define HMATRIX_PRBS8 0x00c4
#define HMATRIX_PRAS9 0x00c8
#define HMATRIX_PRBS9 0x00cc
#define HMATRIX_PRAS10 0x00d0
#define HMATRIX_PRBS10 0x00d4
#define HMATRIX_PRAS11 0x00d8
#define HMATRIX_PRBS11 0x00dc
#define HMATRIX_PRAS12 0x00e0
#define HMATRIX_PRBS12 0x00e4
#define HMATRIX_PRAS13 0x00e8
#define HMATRIX_PRBS13 0x00ec
#define HMATRIX_PRAS14 0x00f0
#define HMATRIX_PRBS14 0x00f4
#define HMATRIX_PRAS15 0x00f8
#define HMATRIX_PRBS15 0x00fc
#define HMATRIX_MRCR 0x0100
#define HMATRIX_SFR0 0x0110
#define HMATRIX_SFR1 0x0114
#define HMATRIX_SFR2 0x0118
#define HMATRIX_SFR3 0x011c
#define HMATRIX_SFR4 0x0120
#define HMATRIX_SFR5 0x0124
#define HMATRIX_SFR6 0x0128
#define HMATRIX_SFR7 0x012c
#define HMATRIX_SFR8 0x0130
#define HMATRIX_SFR9 0x0134
#define HMATRIX_SFR10 0x0138
#define HMATRIX_SFR11 0x013c
#define HMATRIX_SFR12 0x0140
#define HMATRIX_SFR13 0x0144
#define HMATRIX_SFR14 0x0148
#define HMATRIX_SFR15 0x014c
/* Bitfields in MCFGx */
#define HMATRIX_ULBT_OFFSET 0
#define HMATRIX_ULBT_SIZE 3
/* Bitfields in SCFGx */
#define HMATRIX_SLOT_CYCLE_OFFSET 0
#define HMATRIX_SLOT_CYCLE_SIZE 8
#define HMATRIX_DEFMSTR_TYPE_OFFSET 16
#define HMATRIX_DEFMSTR_TYPE_SIZE 2
#define HMATRIX_FIXED_DEFMSTR_OFFSET 18
#define HMATRIX_FIXED_DEFMSTR_SIZE 4
#define HMATRIX_ARBT_OFFSET 24
#define HMATRIX_ARBT_SIZE 2
/* Bitfields in PRASx */
#define HMATRIX_M0PR_OFFSET 0
#define HMATRIX_M0PR_SIZE 4
#define HMATRIX_M1PR_OFFSET 4
#define HMATRIX_M1PR_SIZE 4
#define HMATRIX_M2PR_OFFSET 8
#define HMATRIX_M2PR_SIZE 4
#define HMATRIX_M3PR_OFFSET 12
#define HMATRIX_M3PR_SIZE 4
#define HMATRIX_M4PR_OFFSET 16
#define HMATRIX_M4PR_SIZE 4
#define HMATRIX_M5PR_OFFSET 20
#define HMATRIX_M5PR_SIZE 4
#define HMATRIX_M6PR_OFFSET 24
#define HMATRIX_M6PR_SIZE 4
#define HMATRIX_M7PR_OFFSET 28
#define HMATRIX_M7PR_SIZE 4
/* Bitfields in PRBSx */
#define HMATRIX_M8PR_OFFSET 0
#define HMATRIX_M8PR_SIZE 4
#define HMATRIX_M9PR_OFFSET 4
#define HMATRIX_M9PR_SIZE 4
#define HMATRIX_M10PR_OFFSET 8
#define HMATRIX_M10PR_SIZE 4
#define HMATRIX_M11PR_OFFSET 12
#define HMATRIX_M11PR_SIZE 4
#define HMATRIX_M12PR_OFFSET 16
#define HMATRIX_M12PR_SIZE 4
#define HMATRIX_M13PR_OFFSET 20
#define HMATRIX_M13PR_SIZE 4
#define HMATRIX_M14PR_OFFSET 24
#define HMATRIX_M14PR_SIZE 4
#define HMATRIX_M15PR_OFFSET 28
#define HMATRIX_M15PR_SIZE 4
/* Bitfields in SFR4 */
#define HMATRIX_CS1A_OFFSET 1
#define HMATRIX_CS1A_SIZE 1
#define HMATRIX_CS3A_OFFSET 3
#define HMATRIX_CS3A_SIZE 1
#define HMATRIX_CS4A_OFFSET 4
#define HMATRIX_CS4A_SIZE 1
#define HMATRIX_CS5A_OFFSET 5
#define HMATRIX_CS5A_SIZE 1
#define HMATRIX_DBPUC_OFFSET 8
#define HMATRIX_DBPUC_SIZE 1
/* Constants for ULBT */
#define HMATRIX_ULBT_INFINITE 0
#define HMATRIX_ULBT_SINGLE 1
#define HMATRIX_ULBT_FOUR_BEAT 2
#define HMATRIX_ULBT_EIGHT_BEAT 3
#define HMATRIX_ULBT_SIXTEEN_BEAT 4
/* Constants for DEFMSTR_TYPE */
#define HMATRIX_DEFMSTR_TYPE_NO_DEFAULT 0
#define HMATRIX_DEFMSTR_TYPE_LAST_DEFAULT 1
#define HMATRIX_DEFMSTR_TYPE_FIXED_DEFAULT 2
/* Constants for ARBT */
#define HMATRIX_ARBT_ROUND_ROBIN 0
#define HMATRIX_ARBT_FIXED_PRIORITY 1
/* Bit manipulation macros */
#define HMATRIX_BIT(name) \
(1 << HMATRIX_##name##_OFFSET)
#define HMATRIX_BF(name,value) \
(((value) & ((1 << HMATRIX_##name##_SIZE) - 1)) \
<< HMATRIX_##name##_OFFSET)
#define HMATRIX_BFEXT(name,value) \
(((value) >> HMATRIX_##name##_OFFSET) \
& ((1 << HMATRIX_##name##_SIZE) - 1))
#define HMATRIX_BFINS(name,value,old) \
(((old) & ~(((1 << HMATRIX_##name##_SIZE) - 1) \
<< HMATRIX_##name##_OFFSET)) \
| HMATRIX_BF(name,value))
#endif /* __HMATRIX_H */

View File

@ -46,4 +46,41 @@
#define DMAC_DMAREQ_2 9 #define DMAC_DMAREQ_2 9
#define DMAC_DMAREQ_3 10 #define DMAC_DMAREQ_3 10
/* HSB master IDs */
#define HMATRIX_MASTER_CPU_DCACHE 0
#define HMATRIX_MASTER_CPU_ICACHE 1
#define HMATRIX_MASTER_PDC 2
#define HMATRIX_MASTER_ISI 3
#define HMATRIX_MASTER_USBA 4
#define HMATRIX_MASTER_LCDC 5
#define HMATRIX_MASTER_MACB0 6
#define HMATRIX_MASTER_MACB1 7
#define HMATRIX_MASTER_DMACA_M0 8
#define HMATRIX_MASTER_DMACA_M1 9
/* HSB slave IDs */
#define HMATRIX_SLAVE_SRAM0 0
#define HMATRIX_SLAVE_SRAM1 1
#define HMATRIX_SLAVE_PBA 2
#define HMATRIX_SLAVE_PBB 3
#define HMATRIX_SLAVE_EBI 4
#define HMATRIX_SLAVE_USBA 5
#define HMATRIX_SLAVE_LCDC 6
#define HMATRIX_SLAVE_DMACA 7
/* Bits in HMATRIX SFR4 (EBI) */
#define HMATRIX_EBI_SDRAM_ENABLE (1 << 1)
#define HMATRIX_EBI_NAND_ENABLE (1 << 3)
#define HMATRIX_EBI_CF0_ENABLE (1 << 4)
#define HMATRIX_EBI_CF1_ENABLE (1 << 5)
#define HMATRIX_EBI_PULLUP_DISABLE (1 << 8)
/*
* Base addresses of controllers that may be accessed early by
* platform code.
*/
#define PM_BASE 0xfff00000
#define HMATRIX_BASE 0xfff00800
#define SDRAMC_BASE 0xfff03800
#endif /* __ASM_ARCH_AT32AP700X_H__ */ #endif /* __ASM_ARCH_AT32AP700X_H__ */

View File

@ -0,0 +1,19 @@
/*
* AVR32 chip-specific definitions
*
* Copyright (C) 2008 Atmel Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __ASM_AVR32_ARCH_CHIP_H__
#define __ASM_AVR32_ARCH_CHIP_H__
#if defined(CONFIG_CPU_AT32AP700X)
# include <mach/at32ap700x.h>
#else
# error Unknown chip type selected
#endif
#endif /* __ASM_AVR32_ARCH_CHIP_H__ */

View File

@ -0,0 +1,55 @@
/*
* High-Speed Bus Matrix configuration registers
*
* Copyright (C) 2008 Atmel Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __HMATRIX_H
#define __HMATRIX_H
extern struct clk at32_hmatrix_clk;
void hmatrix_write_reg(unsigned long offset, u32 value);
u32 hmatrix_read_reg(unsigned long offset);
void hmatrix_sfr_set_bits(unsigned int slave_id, u32 mask);
void hmatrix_sfr_clear_bits(unsigned int slave_id, u32 mask);
/* Master Configuration register */
#define HMATRIX_MCFG(m) (0x0000 + 4 * (m))
/* Undefined length burst limit */
# define HMATRIX_MCFG_ULBT_INFINITE 0 /* Infinite length */
# define HMATRIX_MCFG_ULBT_SINGLE 1 /* Single Access */
# define HMATRIX_MCFG_ULBT_FOUR_BEAT 2 /* Four beat */
# define HMATRIX_MCFG_ULBT_EIGHT_BEAT 3 /* Eight beat */
# define HMATRIX_MCFG_ULBT_SIXTEEN_BEAT 4 /* Sixteen beat */
/* Slave Configuration register */
#define HMATRIX_SCFG(s) (0x0040 + 4 * (s))
# define HMATRIX_SCFG_SLOT_CYCLE(x) ((x) << 0) /* Max burst cycles */
# define HMATRIX_SCFG_DEFMSTR_NONE ( 0 << 16) /* No default master */
# define HMATRIX_SCFG_DEFMSTR_LAST ( 1 << 16) /* Last def master */
# define HMATRIX_SCFG_DEFMSTR_FIXED ( 2 << 16) /* Fixed def master */
# define HMATRIX_SCFG_FIXED_DEFMSTR(m) ((m) << 18) /* Fixed master ID */
# define HMATRIX_SCFG_ARBT_ROUND_ROBIN ( 0 << 24) /* RR arbitration */
# define HMATRIX_SCFG_ARBT_FIXED_PRIO ( 1 << 24) /* Fixed priority */
/* Slave Priority register A (master 0..7) */
#define HMATRIX_PRAS(s) (0x0080 + 8 * (s))
# define HMATRIX_PRAS_PRIO(m, p) ((p) << ((m) * 4))
/* Slave Priority register A (master 8..15) */
#define HMATRIX_PRBS(s) (0x0084 + 8 * (s))
# define HMATRIX_PRBS_PRIO(m, p) ((p) << (((m) - 8) * 4))
/* Master Remap Control Register */
#define HMATRIX_MRCR 0x0100
# define HMATRIX_MRCR_REMAP(m) ( 1 << (m)) /* Remap master m */
/* Special Function Register. Bit definitions are chip-specific */
#define HMATRIX_SFR(s) (0x0110 + 4 * (s))
#endif /* __HMATRIX_H */

View File

@ -14,12 +14,10 @@
#include <asm/cacheflush.h> #include <asm/cacheflush.h>
#include <asm/sysreg.h> #include <asm/sysreg.h>
#include <mach/chip.h>
#include <mach/pm.h> #include <mach/pm.h>
#include <mach/sram.h> #include <mach/sram.h>
/* FIXME: This is only valid for AP7000 */
#define SDRAMC_BASE 0xfff03800
#include "sdramc.h" #include "sdramc.h"
#define SRAM_PAGE_FLAGS (SYSREG_BIT(TLBELO_D) | SYSREG_BF(SZ, 1) \ #define SRAM_PAGE_FLAGS (SYSREG_BIT(TLBELO_D) | SYSREG_BF(SZ, 1) \

View File

@ -4,14 +4,6 @@
#ifndef __ARCH_AVR32_MACH_AT32AP_PM_H__ #ifndef __ARCH_AVR32_MACH_AT32AP_PM_H__
#define __ARCH_AVR32_MACH_AT32AP_PM_H__ #define __ARCH_AVR32_MACH_AT32AP_PM_H__
/*
* We can reduce the code size a bit by using a constant here. Since
* this file is only used on AVR32 AP CPUs with segmentation enabled,
* it's safe to not use ioremap. Generic drivers should of course
* never do this.
*/
#define AT32_PM_BASE 0xfff00000
/* PM register offsets */ /* PM register offsets */
#define PM_MCCTRL 0x0000 #define PM_MCCTRL 0x0000
#define PM_CKSEL 0x0004 #define PM_CKSEL 0x0004
@ -113,8 +105,8 @@
/* Register access macros */ /* Register access macros */
#define pm_readl(reg) \ #define pm_readl(reg) \
__raw_readl((void __iomem __force *)AT32_PM_BASE + PM_##reg) __raw_readl((void __iomem __force *)PM_BASE + PM_##reg)
#define pm_writel(reg,value) \ #define pm_writel(reg,value) \
__raw_writel((value), (void __iomem __force *)AT32_PM_BASE + PM_##reg) __raw_writel((value), (void __iomem __force *)PM_BASE + PM_##reg)
#endif /* __ARCH_AVR32_MACH_AT32AP_PM_H__ */ #endif /* __ARCH_AVR32_MACH_AT32AP_PM_H__ */

View File

@ -1,49 +0,0 @@
/*
* Pin definitions for AT32AP7000.
*
* Copyright (C) 2006 Atmel Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __ASM_ARCH_AT32AP700X_H__
#define __ASM_ARCH_AT32AP700X_H__
#define GPIO_PERIPH_A 0
#define GPIO_PERIPH_B 1
/*
* Pin numbers identifying specific GPIO pins on the chip. They can
* also be converted to IRQ numbers by passing them through
* gpio_to_irq().
*/
#define GPIO_PIOA_BASE (0)
#define GPIO_PIOB_BASE (GPIO_PIOA_BASE + 32)
#define GPIO_PIOC_BASE (GPIO_PIOB_BASE + 32)
#define GPIO_PIOD_BASE (GPIO_PIOC_BASE + 32)
#define GPIO_PIOE_BASE (GPIO_PIOD_BASE + 32)
#define GPIO_PIN_PA(N) (GPIO_PIOA_BASE + (N))
#define GPIO_PIN_PB(N) (GPIO_PIOB_BASE + (N))
#define GPIO_PIN_PC(N) (GPIO_PIOC_BASE + (N))
#define GPIO_PIN_PD(N) (GPIO_PIOD_BASE + (N))
#define GPIO_PIN_PE(N) (GPIO_PIOE_BASE + (N))
/*
* DMAC peripheral hardware handshaking interfaces, used with dw_dmac
*/
#define DMAC_MCI_RX 0
#define DMAC_MCI_TX 1
#define DMAC_DAC_TX 2
#define DMAC_AC97_A_RX 3
#define DMAC_AC97_A_TX 4
#define DMAC_AC97_B_RX 5
#define DMAC_AC97_B_TX 6
#define DMAC_DMAREQ_0 7
#define DMAC_DMAREQ_1 8
#define DMAC_DMAREQ_2 9
#define DMAC_DMAREQ_3 10
#endif /* __ASM_ARCH_AT32AP700X_H__ */

View File

@ -1,121 +0,0 @@
/*
* Platform data definitions.
*/
#ifndef __ASM_ARCH_BOARD_H
#define __ASM_ARCH_BOARD_H
#include <linux/types.h>
#define GPIO_PIN_NONE (-1)
/*
* Clock rates for various on-board oscillators. The number of entries
* in this array is chip-dependent.
*/
extern unsigned long at32_board_osc_rates[];
/* Add basic devices: system manager, interrupt controller, portmuxes, etc. */
void at32_add_system_devices(void);
#define ATMEL_MAX_UART 4
extern struct platform_device *atmel_default_console_device;
struct atmel_uart_data {
short use_dma_tx; /* use transmit DMA? */
short use_dma_rx; /* use receive DMA? */
void __iomem *regs; /* virtual base address, if any */
};
void at32_map_usart(unsigned int hw_id, unsigned int line);
struct platform_device *at32_add_device_usart(unsigned int id);
struct eth_platform_data {
u32 phy_mask;
u8 is_rmii;
};
struct platform_device *
at32_add_device_eth(unsigned int id, struct eth_platform_data *data);
struct spi_board_info;
struct platform_device *
at32_add_device_spi(unsigned int id, struct spi_board_info *b, unsigned int n);
struct atmel_lcdfb_info;
struct platform_device *
at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_info *data,
unsigned long fbmem_start, unsigned long fbmem_len,
unsigned int pin_config);
struct usba_platform_data;
struct platform_device *
at32_add_device_usba(unsigned int id, struct usba_platform_data *data);
struct ide_platform_data {
u8 cs;
};
struct platform_device *
at32_add_device_ide(unsigned int id, unsigned int extint,
struct ide_platform_data *data);
/* mask says which PWM channels to mux */
struct platform_device *at32_add_device_pwm(u32 mask);
/* depending on what's hooked up, not all SSC pins will be used */
#define ATMEL_SSC_TK 0x01
#define ATMEL_SSC_TF 0x02
#define ATMEL_SSC_TD 0x04
#define ATMEL_SSC_TX (ATMEL_SSC_TK | ATMEL_SSC_TF | ATMEL_SSC_TD)
#define ATMEL_SSC_RK 0x10
#define ATMEL_SSC_RF 0x20
#define ATMEL_SSC_RD 0x40
#define ATMEL_SSC_RX (ATMEL_SSC_RK | ATMEL_SSC_RF | ATMEL_SSC_RD)
struct platform_device *
at32_add_device_ssc(unsigned int id, unsigned int flags);
struct i2c_board_info;
struct platform_device *at32_add_device_twi(unsigned int id,
struct i2c_board_info *b,
unsigned int n);
struct mci_platform_data;
struct platform_device *
at32_add_device_mci(unsigned int id, struct mci_platform_data *data);
struct ac97c_platform_data {
unsigned short dma_rx_periph_id;
unsigned short dma_tx_periph_id;
unsigned short dma_controller_id;
int reset_pin;
};
struct platform_device *
at32_add_device_ac97c(unsigned int id, struct ac97c_platform_data *data);
struct platform_device *at32_add_device_abdac(unsigned int id);
struct platform_device *at32_add_device_psif(unsigned int id);
struct cf_platform_data {
int detect_pin;
int reset_pin;
int vcc_pin;
int ready_pin;
u8 cs;
};
struct platform_device *
at32_add_device_cf(unsigned int id, unsigned int extint,
struct cf_platform_data *data);
/* NAND / SmartMedia */
struct atmel_nand_data {
int enable_pin; /* chip enable */
int det_pin; /* card detect */
int rdy_pin; /* ready/busy */
u8 ale; /* address line number connected to ALE */
u8 cle; /* address line number connected to CLE */
u8 bus_width_16; /* buswidth is 16 bit */
struct mtd_partition *(*partition_info)(int size, int *num_partitions);
};
struct platform_device *
at32_add_device_nand(unsigned int id, struct atmel_nand_data *data);
#endif /* __ASM_ARCH_BOARD_H */

View File

@ -1,35 +0,0 @@
/*
* AVR32 and (fake) AT91 CPU identification
*
* Copyright (C) 2007 Atmel Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __ASM_ARCH_CPU_H
#define __ASM_ARCH_CPU_H
/*
* Only AT32AP7000 is defined for now. We can identify the specific
* chip at runtime, but I'm not sure if it's really worth it.
*/
#ifdef CONFIG_CPU_AT32AP700X
# define cpu_is_at32ap7000() (1)
#else
# define cpu_is_at32ap7000() (0)
#endif
/*
* Since this is AVR32, we will never run on any AT91 CPU. But these
* definitions may reduce clutter in common drivers.
*/
#define cpu_is_at91rm9200() (0)
#define cpu_is_at91sam9xe() (0)
#define cpu_is_at91sam9260() (0)
#define cpu_is_at91sam9261() (0)
#define cpu_is_at91sam9263() (0)
#define cpu_is_at91sam9rl() (0)
#define cpu_is_at91cap9() (0)
#endif /* __ASM_ARCH_CPU_H */

View File

@ -1,45 +0,0 @@
#ifndef __ASM_AVR32_ARCH_GPIO_H
#define __ASM_AVR32_ARCH_GPIO_H
#include <linux/compiler.h>
#include <asm/irq.h>
/* Some GPIO chips can manage IRQs; some can't. The exact numbers can
* be changed if needed, but for the moment they're not configurable.
*/
#define ARCH_NR_GPIOS (NR_GPIO_IRQS + 2 * 32)
/* Arch-neutral GPIO API, supporting both "native" and external GPIOs. */
#include <asm-generic/gpio.h>
static inline int gpio_get_value(unsigned int gpio)
{
return __gpio_get_value(gpio);
}
static inline void gpio_set_value(unsigned int gpio, int value)
{
__gpio_set_value(gpio, value);
}
static inline int gpio_cansleep(unsigned int gpio)
{
return __gpio_cansleep(gpio);
}
static inline int gpio_to_irq(unsigned int gpio)
{
if (gpio < NR_GPIO_IRQS)
return gpio + GPIO_IRQ_BASE;
return -EINVAL;
}
static inline int irq_to_gpio(unsigned int irq)
{
return irq - GPIO_IRQ_BASE;
}
#endif /* __ASM_AVR32_ARCH_GPIO_H */

View File

@ -1,18 +0,0 @@
/*
* AT32AP platform initialization calls.
*
* Copyright (C) 2006 Atmel Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __ASM_AVR32_AT32AP_INIT_H__
#define __ASM_AVR32_AT32AP_INIT_H__
void setup_platform(void);
void setup_board(void);
void at32_setup_serial_console(unsigned int usart_id);
#endif /* __ASM_AVR32_AT32AP_INIT_H__ */

View File

@ -1,39 +0,0 @@
#ifndef __ASM_AVR32_ARCH_AT32AP_IO_H
#define __ASM_AVR32_ARCH_AT32AP_IO_H
/* For "bizarre" halfword swapping */
#include <linux/byteorder/swabb.h>
#if defined(CONFIG_AP700X_32_BIT_SMC)
# define __swizzle_addr_b(addr) (addr ^ 3UL)
# define __swizzle_addr_w(addr) (addr ^ 2UL)
# define __swizzle_addr_l(addr) (addr)
# define ioswabb(a, x) (x)
# define ioswabw(a, x) (x)
# define ioswabl(a, x) (x)
# define __mem_ioswabb(a, x) (x)
# define __mem_ioswabw(a, x) swab16(x)
# define __mem_ioswabl(a, x) swab32(x)
#elif defined(CONFIG_AP700X_16_BIT_SMC)
# define __swizzle_addr_b(addr) (addr ^ 1UL)
# define __swizzle_addr_w(addr) (addr)
# define __swizzle_addr_l(addr) (addr)
# define ioswabb(a, x) (x)
# define ioswabw(a, x) (x)
# define ioswabl(a, x) swahw32(x)
# define __mem_ioswabb(a, x) (x)
# define __mem_ioswabw(a, x) swab16(x)
# define __mem_ioswabl(a, x) swahb32(x)
#else
# define __swizzle_addr_b(addr) (addr)
# define __swizzle_addr_w(addr) (addr)
# define __swizzle_addr_l(addr) (addr)
# define ioswabb(a, x) (x)
# define ioswabw(a, x) swab16(x)
# define ioswabl(a, x) swab32(x)
# define __mem_ioswabb(a, x) (x)
# define __mem_ioswabw(a, x) (x)
# define __mem_ioswabl(a, x) (x)
#endif
#endif /* __ASM_AVR32_ARCH_AT32AP_IO_H */

View File

@ -1,14 +0,0 @@
#ifndef __ASM_AVR32_ARCH_IRQ_H
#define __ASM_AVR32_ARCH_IRQ_H
#define EIM_IRQ_BASE NR_INTERNAL_IRQS
#define NR_EIM_IRQS 32
#define AT32_EXTINT(n) (EIM_IRQ_BASE + (n))
#define GPIO_IRQ_BASE (EIM_IRQ_BASE + NR_EIM_IRQS)
#define NR_GPIO_CTLR (5 /*internal*/ + 1 /*external*/)
#define NR_GPIO_IRQS (NR_GPIO_CTLR * 32)
#define NR_IRQS (GPIO_IRQ_BASE + NR_GPIO_IRQS)
#endif /* __ASM_AVR32_ARCH_IRQ_H */

View File

@ -1,51 +0,0 @@
/*
* AVR32 AP Power Management.
*
* Copyright (C) 2008 Atmel Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __ASM_AVR32_ARCH_PM_H
#define __ASM_AVR32_ARCH_PM_H
/* Possible arguments to the "sleep" instruction */
#define CPU_SLEEP_IDLE 0
#define CPU_SLEEP_FROZEN 1
#define CPU_SLEEP_STANDBY 2
#define CPU_SLEEP_STOP 3
#define CPU_SLEEP_STATIC 5
#ifndef __ASSEMBLY__
extern void cpu_enter_idle(void);
extern void cpu_enter_standby(unsigned long sdramc_base);
extern bool disable_idle_sleep;
static inline void cpu_disable_idle_sleep(void)
{
disable_idle_sleep = true;
}
static inline void cpu_enable_idle_sleep(void)
{
disable_idle_sleep = false;
}
static inline void cpu_idle_sleep(void)
{
/*
* If we're using the COUNT and COMPARE registers for
* timekeeping, we can't use the IDLE state.
*/
if (disable_idle_sleep)
cpu_relax();
else
cpu_enter_idle();
}
void intc_set_suspend_handler(unsigned long offset);
#endif
#endif /* __ASM_AVR32_ARCH_PM_H */

View File

@ -1,29 +0,0 @@
/*
* AT32 portmux interface.
*
* Copyright (C) 2006 Atmel Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __ASM_ARCH_PORTMUX_H__
#define __ASM_ARCH_PORTMUX_H__
/*
* Set up pin multiplexing, called from board init only.
*
* The following flags determine the initial state of the pin.
*/
#define AT32_GPIOF_PULLUP 0x00000001 /* (not-OUT) Enable pull-up */
#define AT32_GPIOF_OUTPUT 0x00000002 /* (OUT) Enable output driver */
#define AT32_GPIOF_HIGH 0x00000004 /* (OUT) Set output high */
#define AT32_GPIOF_DEGLITCH 0x00000008 /* (IN) Filter glitches */
#define AT32_GPIOF_MULTIDRV 0x00000010 /* Enable multidriver option */
void at32_select_periph(unsigned int pin, unsigned int periph,
unsigned long flags);
void at32_select_gpio(unsigned int pin, unsigned long flags);
void at32_reserve_pin(unsigned int pin);
#endif /* __ASM_ARCH_PORTMUX_H__ */

View File

@ -1,113 +0,0 @@
/*
* Static Memory Controller for AT32 chips
*
* Copyright (C) 2006 Atmel Corporation
*
* Inspired by the OMAP2 General-Purpose Memory Controller interface
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __ARCH_AT32AP_SMC_H
#define __ARCH_AT32AP_SMC_H
/*
* All timing parameters are in nanoseconds.
*/
struct smc_timing {
/* Delay from address valid to assertion of given strobe */
int ncs_read_setup;
int nrd_setup;
int ncs_write_setup;
int nwe_setup;
/* Pulse length of given strobe */
int ncs_read_pulse;
int nrd_pulse;
int ncs_write_pulse;
int nwe_pulse;
/* Total cycle length of given operation */
int read_cycle;
int write_cycle;
/* Minimal recovery times, will extend cycle if needed */
int ncs_read_recover;
int nrd_recover;
int ncs_write_recover;
int nwe_recover;
};
/*
* All timing parameters are in clock cycles.
*/
struct smc_config {
/* Delay from address valid to assertion of given strobe */
u8 ncs_read_setup;
u8 nrd_setup;
u8 ncs_write_setup;
u8 nwe_setup;
/* Pulse length of given strobe */
u8 ncs_read_pulse;
u8 nrd_pulse;
u8 ncs_write_pulse;
u8 nwe_pulse;
/* Total cycle length of given operation */
u8 read_cycle;
u8 write_cycle;
/* Bus width in bytes */
u8 bus_width;
/*
* 0: Data is sampled on rising edge of NCS
* 1: Data is sampled on rising edge of NRD
*/
unsigned int nrd_controlled:1;
/*
* 0: Data is driven on falling edge of NCS
* 1: Data is driven on falling edge of NWR
*/
unsigned int nwe_controlled:1;
/*
* 0: NWAIT is disabled
* 1: Reserved
* 2: NWAIT is frozen mode
* 3: NWAIT in ready mode
*/
unsigned int nwait_mode:2;
/*
* 0: Byte select access type
* 1: Byte write access type
*/
unsigned int byte_write:1;
/*
* Number of clock cycles before data is released after
* the rising edge of the read controlling signal
*
* Total cycles from SMC is tdf_cycles + 1
*/
unsigned int tdf_cycles:4;
/*
* 0: TDF optimization disabled
* 1: TDF optimization enabled
*/
unsigned int tdf_mode:1;
};
extern void smc_set_timing(struct smc_config *config,
const struct smc_timing *timing);
extern int smc_set_configuration(int cs, const struct smc_config *config);
extern struct smc_config *smc_get_configuration(int cs);
#endif /* __ARCH_AT32AP_SMC_H */

View File

@ -1,30 +0,0 @@
/*
* Simple SRAM allocator
*
* Copyright (C) 2008 Atmel Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __ASM_AVR32_ARCH_SRAM_H
#define __ASM_AVR32_ARCH_SRAM_H
#include <linux/genalloc.h>
extern struct gen_pool *sram_pool;
static inline unsigned long sram_alloc(size_t len)
{
if (!sram_pool)
return 0UL;
return gen_pool_alloc(sram_pool, len);
}
static inline void sram_free(unsigned long addr, size_t len)
{
return gen_pool_free(sram_pool, addr, len);
}
#endif /* __ASM_AVR32_ARCH_SRAM_H */