From 28c8e4790ca5ef75f54895ca46437f9fbb433ddf Mon Sep 17 00:00:00 2001 From: Andy Gospodarek Date: Fri, 11 Jun 2010 12:47:03 +0000 Subject: [PATCH] ixgbe: fix automatic LRO/RSC settings for low latency This patch added to 2.6.34: commit f8d1dcaf88bddc7f282722ec1fdddbcb06a72f18 Author: Jesse Brandeburg Date: Tue Apr 27 01:37:20 2010 +0000 ixgbe: enable extremely low latency introduced a feature where LRO (called RSC on the hardware) was disabled automatically when setting rx-usecs to 0 via ethtool. Some might not like the fact that LRO was disabled automatically, but I'm fine with that. What I don't like is that LRO/RSC is automatically enabled when rx-usecs is set >0 via ethtool. This would certainly be a problem if the device was used for forwarding and it was determined that the low latency wasn't needed after the device was already forwarding. I played around with saving the state of LRO in the driver, but it just didn't seem worthwhile and would require a small change to dev_disable_lro() that I did not like. This patch simply leaves LRO disabled when setting rx-usecs >0 and requires that the user enable it again. An extra informational message will also now appear in the log so users can understand why LRO isn't being enabled as they expect. Inconsistency of LRO setting first noticed by Stanislaw Gruszka. Signed-off-by: Andy Gospodarek CC: Stanislaw Gruszka CC: stable@kernel.org Tested-by: Stephen Ko Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/ixgbe/ixgbe_ethtool.c | 37 +++++++------------------------ 1 file changed, 8 insertions(+), 29 deletions(-) diff --git a/drivers/net/ixgbe/ixgbe_ethtool.c b/drivers/net/ixgbe/ixgbe_ethtool.c index c50a7541ffec..3a93a81872b8 100644 --- a/drivers/net/ixgbe/ixgbe_ethtool.c +++ b/drivers/net/ixgbe/ixgbe_ethtool.c @@ -2077,25 +2077,6 @@ static int ixgbe_get_coalesce(struct net_device *netdev, return 0; } -/* - * this function must be called before setting the new value of - * rx_itr_setting - */ -static bool ixgbe_reenable_rsc(struct ixgbe_adapter *adapter, - struct ethtool_coalesce *ec) -{ - /* check the old value and enable RSC if necessary */ - if ((adapter->rx_itr_setting == 0) && - (adapter->flags2 & IXGBE_FLAG2_RSC_CAPABLE)) { - adapter->flags2 |= IXGBE_FLAG2_RSC_ENABLED; - adapter->netdev->features |= NETIF_F_LRO; - DPRINTK(PROBE, INFO, "rx-usecs set to %d, re-enabling RSC\n", - ec->rx_coalesce_usecs); - return true; - } - return false; -} - static int ixgbe_set_coalesce(struct net_device *netdev, struct ethtool_coalesce *ec) { @@ -2124,9 +2105,6 @@ static int ixgbe_set_coalesce(struct net_device *netdev, (1000000/ec->rx_coalesce_usecs < IXGBE_MIN_INT_RATE)) return -EINVAL; - /* check the old value and enable RSC if necessary */ - need_reset = ixgbe_reenable_rsc(adapter, ec); - /* store the value in ints/second */ adapter->rx_eitr_param = 1000000/ec->rx_coalesce_usecs; @@ -2135,9 +2113,6 @@ static int ixgbe_set_coalesce(struct net_device *netdev, /* clear the lower bit as its used for dynamic state */ adapter->rx_itr_setting &= ~1; } else if (ec->rx_coalesce_usecs == 1) { - /* check the old value and enable RSC if necessary */ - need_reset = ixgbe_reenable_rsc(adapter, ec); - /* 1 means dynamic mode */ adapter->rx_eitr_param = 20000; adapter->rx_itr_setting = 1; @@ -2157,10 +2132,11 @@ static int ixgbe_set_coalesce(struct net_device *netdev, */ if (adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED) { adapter->flags2 &= ~IXGBE_FLAG2_RSC_ENABLED; - netdev->features &= ~NETIF_F_LRO; - DPRINTK(PROBE, INFO, - "rx-usecs set to 0, disabling RSC\n"); - + if (netdev->features & NETIF_F_LRO) { + netdev->features &= ~NETIF_F_LRO; + DPRINTK(PROBE, INFO, "rx-usecs set to 0, " + "disabling LRO/RSC\n"); + } need_reset = true; } } @@ -2255,6 +2231,9 @@ static int ixgbe_set_flags(struct net_device *netdev, u32 data) } } else if (!adapter->rx_itr_setting) { netdev->features &= ~ETH_FLAG_LRO; + if (data & ETH_FLAG_LRO) + DPRINTK(PROBE, INFO, "rx-usecs set to 0, " + "LRO/RSC cannot be enabled.\n"); } }