dt-bindings: regulator/mfd: Reorganize S5M8767 bindings
The regulator/s5m8767-regulator.txt duplicates some of the information about bindings with old mfd/s2mps11.txt. Now common part exists entirely in mfd/samsung,sec-core.txt so: - add company prefix to file name (regulator/samsung,s5m8767.txt), - remove duplicated information, - reorganize the contents to match style of regulator/samsung,s2mps11.txt. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
This commit is contained in:
Krzysztof Kozlowski
Lee Jones
parent
a13c7c51fd
commit
27383ca93b
|
|
@ -14,6 +14,7 @@ addressed by the host system using different I2C slave addresses.
|
||||||
This document describes bindings for main device node. Optional sub-blocks
|
This document describes bindings for main device node. Optional sub-blocks
|
||||||
must be a sub-nodes to it. Bindings for them can be found in:
|
must be a sub-nodes to it. Bindings for them can be found in:
|
||||||
- bindings/regulator/samsung,s2mps11.txt
|
- bindings/regulator/samsung,s2mps11.txt
|
||||||
|
- bindings/regulator/samsung,s5m8767.txt
|
||||||
- bindings/clock/samsung,s2mps11.txt
|
- bindings/clock/samsung,s2mps11.txt
|
||||||
|
|
||||||
|
|
||||||
|
|
@ -23,7 +24,8 @@ Required properties:
|
||||||
- "samsung,s2mps13-pmic",
|
- "samsung,s2mps13-pmic",
|
||||||
- "samsung,s2mps14-pmic",
|
- "samsung,s2mps14-pmic",
|
||||||
- "samsung,s2mps15-pmic",
|
- "samsung,s2mps15-pmic",
|
||||||
- "samsung,s2mpu02-pmic".
|
- "samsung,s2mpu02-pmic",
|
||||||
|
- "samsung,s5m8767-pmic".
|
||||||
- reg: Specifies the I2C slave address of the pmic block. It should be 0x66.
|
- reg: Specifies the I2C slave address of the pmic block. It should be 0x66.
|
||||||
|
|
||||||
Optional properties:
|
Optional properties:
|
||||||
|
|
|
||||||
|
|
@ -1,163 +0,0 @@
|
||||||
* Samsung S5M8767 Voltage and Current Regulator
|
|
||||||
|
|
||||||
The Samsung S5M8767 is a multi-function device which includes voltage and
|
|
||||||
current regulators, rtc, charger controller and other sub-blocks. It is
|
|
||||||
interfaced to the host controller using a i2c interface. Each sub-block is
|
|
||||||
addressed by the host system using different i2c slave address. This document
|
|
||||||
describes the bindings for 'pmic' sub-block of s5m8767.
|
|
||||||
|
|
||||||
Required properties:
|
|
||||||
- compatible: Should be "samsung,s5m8767-pmic".
|
|
||||||
- reg: Specifies the i2c slave address of the pmic block. It should be 0x66.
|
|
||||||
|
|
||||||
- s5m8767,pmic-buck2-dvs-voltage: A set of 8 voltage values in micro-volt (uV)
|
|
||||||
units for buck2 when changing voltage using gpio dvs. Refer to [1] below
|
|
||||||
for additional information.
|
|
||||||
|
|
||||||
- s5m8767,pmic-buck3-dvs-voltage: A set of 8 voltage values in micro-volt (uV)
|
|
||||||
units for buck3 when changing voltage using gpio dvs. Refer to [1] below
|
|
||||||
for additional information.
|
|
||||||
|
|
||||||
- s5m8767,pmic-buck4-dvs-voltage: A set of 8 voltage values in micro-volt (uV)
|
|
||||||
units for buck4 when changing voltage using gpio dvs. Refer to [1] below
|
|
||||||
for additional information.
|
|
||||||
|
|
||||||
- s5m8767,pmic-buck-ds-gpios: GPIO specifiers for three host gpio's used
|
|
||||||
for selecting GPIO DVS lines. It is one-to-one mapped to dvs gpio lines.
|
|
||||||
|
|
||||||
[1] If none of the 's5m8767,pmic-buck[2/3/4]-uses-gpio-dvs' optional
|
|
||||||
property is specified, the 's5m8767,pmic-buck[2/3/4]-dvs-voltage'
|
|
||||||
property should specify atleast one voltage level (which would be a
|
|
||||||
safe operating voltage).
|
|
||||||
|
|
||||||
If either of the 's5m8767,pmic-buck[2/3/4]-uses-gpio-dvs' optional
|
|
||||||
property is specified, then all the eight voltage values for the
|
|
||||||
's5m8767,pmic-buck[2/3/4]-dvs-voltage' should be specified.
|
|
||||||
|
|
||||||
Optional properties:
|
|
||||||
- interrupt-parent: Specifies the phandle of the interrupt controller to which
|
|
||||||
the interrupts from s5m8767 are delivered to.
|
|
||||||
- interrupts: Interrupt specifiers for two interrupt sources.
|
|
||||||
- First interrupt specifier is for 'irq1' interrupt.
|
|
||||||
- Second interrupt specifier is for 'alert' interrupt.
|
|
||||||
- s5m8767,pmic-buck2-uses-gpio-dvs: 'buck2' can be controlled by gpio dvs.
|
|
||||||
- s5m8767,pmic-buck3-uses-gpio-dvs: 'buck3' can be controlled by gpio dvs.
|
|
||||||
- s5m8767,pmic-buck4-uses-gpio-dvs: 'buck4' can be controlled by gpio dvs.
|
|
||||||
|
|
||||||
Additional properties required if either of the optional properties are used:
|
|
||||||
|
|
||||||
- s5m8767,pmic-buck234-default-dvs-idx: Default voltage setting selected from
|
|
||||||
the possible 8 options selectable by the dvs gpios. The value of this
|
|
||||||
property should be between 0 and 7. If not specified or if out of range, the
|
|
||||||
default value of this property is set to 0.
|
|
||||||
|
|
||||||
- s5m8767,pmic-buck-dvs-gpios: GPIO specifiers for three host gpio's used
|
|
||||||
for dvs. The format of the gpio specifier depends in the gpio controller.
|
|
||||||
|
|
||||||
Regulators: The regulators of s5m8767 that have to be instantiated should be
|
|
||||||
included in a sub-node named 'regulators'. Regulator nodes included in this
|
|
||||||
sub-node should be of the format as listed below.
|
|
||||||
|
|
||||||
regulator_name {
|
|
||||||
ldo1_reg: LDO1 {
|
|
||||||
regulator-name = "VDD_ALIVE_1.0V";
|
|
||||||
regulator-min-microvolt = <1100000>;
|
|
||||||
regulator-max-microvolt = <1100000>;
|
|
||||||
regulator-always-on;
|
|
||||||
regulator-boot-on;
|
|
||||||
op_mode = <1>; /* Normal Mode */
|
|
||||||
};
|
|
||||||
};
|
|
||||||
The above regulator entries are defined in regulator bindings documentation
|
|
||||||
except these properties:
|
|
||||||
- op_mode: describes the different operating modes of the LDO's with
|
|
||||||
power mode change in SOC. The different possible values are,
|
|
||||||
0 - always off mode
|
|
||||||
1 - on in normal mode
|
|
||||||
2 - low power mode
|
|
||||||
3 - suspend mode
|
|
||||||
- s5m8767,pmic-ext-control-gpios: (optional) GPIO specifier for one
|
|
||||||
GPIO controlling this regulator (enable/disable); This is
|
|
||||||
valid only for buck9.
|
|
||||||
|
|
||||||
The following are the names of the regulators that the s5m8767 pmic block
|
|
||||||
supports. Note: The 'n' in LDOn and BUCKn represents the LDO or BUCK number
|
|
||||||
as per the datasheet of s5m8767.
|
|
||||||
|
|
||||||
- LDOn
|
|
||||||
- valid values for n are 1 to 28
|
|
||||||
- Example: LDO1, LDO2, LDO28
|
|
||||||
- BUCKn
|
|
||||||
- valid values for n are 1 to 9.
|
|
||||||
- Example: BUCK1, BUCK2, BUCK9
|
|
||||||
|
|
||||||
The bindings inside the regulator nodes use the standard regulator bindings
|
|
||||||
which are documented elsewhere.
|
|
||||||
|
|
||||||
Example:
|
|
||||||
|
|
||||||
s5m8767_pmic@66 {
|
|
||||||
compatible = "samsung,s5m8767-pmic";
|
|
||||||
reg = <0x66>;
|
|
||||||
|
|
||||||
s5m8767,pmic-buck2-uses-gpio-dvs;
|
|
||||||
s5m8767,pmic-buck3-uses-gpio-dvs;
|
|
||||||
s5m8767,pmic-buck4-uses-gpio-dvs;
|
|
||||||
|
|
||||||
s5m8767,pmic-buck-default-dvs-idx = <0>;
|
|
||||||
|
|
||||||
s5m8767,pmic-buck-dvs-gpios = <&gpx0 0 0>, /* DVS1 */
|
|
||||||
<&gpx0 1 0>, /* DVS2 */
|
|
||||||
<&gpx0 2 0>; /* DVS3 */
|
|
||||||
|
|
||||||
s5m8767,pmic-buck-ds-gpios = <&gpx2 3 0>, /* SET1 */
|
|
||||||
<&gpx2 4 0>, /* SET2 */
|
|
||||||
<&gpx2 5 0>; /* SET3 */
|
|
||||||
|
|
||||||
s5m8767,pmic-buck2-dvs-voltage = <1350000>, <1300000>,
|
|
||||||
<1250000>, <1200000>,
|
|
||||||
<1150000>, <1100000>,
|
|
||||||
<1000000>, <950000>;
|
|
||||||
|
|
||||||
s5m8767,pmic-buck3-dvs-voltage = <1100000>, <1100000>,
|
|
||||||
<1100000>, <1100000>,
|
|
||||||
<1000000>, <1000000>,
|
|
||||||
<1000000>, <1000000>;
|
|
||||||
|
|
||||||
s5m8767,pmic-buck4-dvs-voltage = <1200000>, <1200000>,
|
|
||||||
<1200000>, <1200000>,
|
|
||||||
<1200000>, <1200000>,
|
|
||||||
<1200000>, <1200000>;
|
|
||||||
|
|
||||||
regulators {
|
|
||||||
ldo1_reg: LDO1 {
|
|
||||||
regulator-name = "VDD_ABB_3.3V";
|
|
||||||
regulator-min-microvolt = <3300000>;
|
|
||||||
regulator-max-microvolt = <3300000>;
|
|
||||||
op_mode = <1>; /* Normal Mode */
|
|
||||||
};
|
|
||||||
|
|
||||||
ldo2_reg: LDO2 {
|
|
||||||
regulator-name = "VDD_ALIVE_1.1V";
|
|
||||||
regulator-min-microvolt = <1100000>;
|
|
||||||
regulator-max-microvolt = <1100000>;
|
|
||||||
regulator-always-on;
|
|
||||||
};
|
|
||||||
|
|
||||||
buck1_reg: BUCK1 {
|
|
||||||
regulator-name = "VDD_MIF_1.2V";
|
|
||||||
regulator-min-microvolt = <950000>;
|
|
||||||
regulator-max-microvolt = <1350000>;
|
|
||||||
regulator-always-on;
|
|
||||||
regulator-boot-on;
|
|
||||||
};
|
|
||||||
|
|
||||||
vemmc_reg: BUCK9 {
|
|
||||||
regulator-name = "VMEM_VDD_2.8V";
|
|
||||||
regulator-min-microvolt = <2800000>;
|
|
||||||
regulator-max-microvolt = <2800000>;
|
|
||||||
op_mode = <3>; /* Standby Mode */
|
|
||||||
s5m8767,pmic-ext-control-gpios = <&gpk0 2 0>;
|
|
||||||
};
|
|
||||||
};
|
|
||||||
};
|
|
||||||
|
|
@ -0,0 +1,145 @@
|
||||||
|
Binding for Samsung S5M8767 regulator block
|
||||||
|
===========================================
|
||||||
|
|
||||||
|
This is a part of device tree bindings for S5M family multi-function devices.
|
||||||
|
More information can be found in bindings/mfd/sec-core.txt file.
|
||||||
|
|
||||||
|
The S5M8767 device provide buck and LDO regulators.
|
||||||
|
|
||||||
|
To register these with regulator framework instantiate under main device node
|
||||||
|
a sub-node named "regulators" with more sub-nodes for each regulator using the
|
||||||
|
common regulator binding documented in:
|
||||||
|
- Documentation/devicetree/bindings/regulator/regulator.txt
|
||||||
|
|
||||||
|
|
||||||
|
Required properties of the main device node (the parent!):
|
||||||
|
- s5m8767,pmic-buck2-dvs-voltage: A set of 8 voltage values in micro-volt (uV)
|
||||||
|
units for buck2 when changing voltage using gpio dvs. Refer to [1] below
|
||||||
|
for additional information.
|
||||||
|
|
||||||
|
- s5m8767,pmic-buck3-dvs-voltage: A set of 8 voltage values in micro-volt (uV)
|
||||||
|
units for buck3 when changing voltage using gpio dvs. Refer to [1] below
|
||||||
|
for additional information.
|
||||||
|
|
||||||
|
- s5m8767,pmic-buck4-dvs-voltage: A set of 8 voltage values in micro-volt (uV)
|
||||||
|
units for buck4 when changing voltage using gpio dvs. Refer to [1] below
|
||||||
|
for additional information.
|
||||||
|
|
||||||
|
- s5m8767,pmic-buck-ds-gpios: GPIO specifiers for three host gpio's used
|
||||||
|
for selecting GPIO DVS lines. It is one-to-one mapped to dvs gpio lines.
|
||||||
|
|
||||||
|
[1] If none of the 's5m8767,pmic-buck[2/3/4]-uses-gpio-dvs' optional
|
||||||
|
property is specified, the 's5m8767,pmic-buck[2/3/4]-dvs-voltage'
|
||||||
|
property should specify atleast one voltage level (which would be a
|
||||||
|
safe operating voltage).
|
||||||
|
|
||||||
|
If either of the 's5m8767,pmic-buck[2/3/4]-uses-gpio-dvs' optional
|
||||||
|
property is specified, then all the eight voltage values for the
|
||||||
|
's5m8767,pmic-buck[2/3/4]-dvs-voltage' should be specified.
|
||||||
|
|
||||||
|
Optional properties of the main device node (the parent!):
|
||||||
|
- s5m8767,pmic-buck2-uses-gpio-dvs: 'buck2' can be controlled by gpio dvs.
|
||||||
|
- s5m8767,pmic-buck3-uses-gpio-dvs: 'buck3' can be controlled by gpio dvs.
|
||||||
|
- s5m8767,pmic-buck4-uses-gpio-dvs: 'buck4' can be controlled by gpio dvs.
|
||||||
|
|
||||||
|
Additional properties required if either of the optional properties are used:
|
||||||
|
|
||||||
|
- s5m8767,pmic-buck234-default-dvs-idx: Default voltage setting selected from
|
||||||
|
the possible 8 options selectable by the dvs gpios. The value of this
|
||||||
|
property should be between 0 and 7. If not specified or if out of range, the
|
||||||
|
default value of this property is set to 0.
|
||||||
|
|
||||||
|
- s5m8767,pmic-buck-dvs-gpios: GPIO specifiers for three host gpio's used
|
||||||
|
for dvs. The format of the gpio specifier depends in the gpio controller.
|
||||||
|
|
||||||
|
|
||||||
|
Names of regulators supported by S5M8767 device:
|
||||||
|
- LDOn
|
||||||
|
- valid values for n are 1 to 28
|
||||||
|
- Example: LDO1, LDO2, LDO28
|
||||||
|
- BUCKn
|
||||||
|
- valid values for n are 1 to 9.
|
||||||
|
- Example: BUCK1, BUCK2, BUCK9
|
||||||
|
Note: The 'n' in LDOn and BUCKn represents the LDO or BUCK number
|
||||||
|
as per the datasheet of device.
|
||||||
|
|
||||||
|
|
||||||
|
Optional properties of the nodes under "regulators" sub-node:
|
||||||
|
- op_mode: describes the different operating modes of the LDO's with
|
||||||
|
power mode change in SOC. The different possible values are,
|
||||||
|
0 - always off mode
|
||||||
|
1 - on in normal mode
|
||||||
|
2 - low power mode
|
||||||
|
3 - suspend mode
|
||||||
|
- s5m8767,pmic-ext-control-gpios: (optional) GPIO specifier for one
|
||||||
|
GPIO controlling this regulator
|
||||||
|
(enable/disable); This is valid only
|
||||||
|
for buck9.
|
||||||
|
|
||||||
|
Example:
|
||||||
|
|
||||||
|
s5m8767_pmic@66 {
|
||||||
|
compatible = "samsung,s5m8767-pmic";
|
||||||
|
reg = <0x66>;
|
||||||
|
|
||||||
|
s5m8767,pmic-buck2-uses-gpio-dvs;
|
||||||
|
s5m8767,pmic-buck3-uses-gpio-dvs;
|
||||||
|
s5m8767,pmic-buck4-uses-gpio-dvs;
|
||||||
|
|
||||||
|
s5m8767,pmic-buck-default-dvs-idx = <0>;
|
||||||
|
|
||||||
|
s5m8767,pmic-buck-dvs-gpios = <&gpx0 0 0>, /* DVS1 */
|
||||||
|
<&gpx0 1 0>, /* DVS2 */
|
||||||
|
<&gpx0 2 0>; /* DVS3 */
|
||||||
|
|
||||||
|
s5m8767,pmic-buck-ds-gpios = <&gpx2 3 0>, /* SET1 */
|
||||||
|
<&gpx2 4 0>, /* SET2 */
|
||||||
|
<&gpx2 5 0>; /* SET3 */
|
||||||
|
|
||||||
|
s5m8767,pmic-buck2-dvs-voltage = <1350000>, <1300000>,
|
||||||
|
<1250000>, <1200000>,
|
||||||
|
<1150000>, <1100000>,
|
||||||
|
<1000000>, <950000>;
|
||||||
|
|
||||||
|
s5m8767,pmic-buck3-dvs-voltage = <1100000>, <1100000>,
|
||||||
|
<1100000>, <1100000>,
|
||||||
|
<1000000>, <1000000>,
|
||||||
|
<1000000>, <1000000>;
|
||||||
|
|
||||||
|
s5m8767,pmic-buck4-dvs-voltage = <1200000>, <1200000>,
|
||||||
|
<1200000>, <1200000>,
|
||||||
|
<1200000>, <1200000>,
|
||||||
|
<1200000>, <1200000>;
|
||||||
|
|
||||||
|
regulators {
|
||||||
|
ldo1_reg: LDO1 {
|
||||||
|
regulator-name = "VDD_ABB_3.3V";
|
||||||
|
regulator-min-microvolt = <3300000>;
|
||||||
|
regulator-max-microvolt = <3300000>;
|
||||||
|
op_mode = <1>; /* Normal Mode */
|
||||||
|
};
|
||||||
|
|
||||||
|
ldo2_reg: LDO2 {
|
||||||
|
regulator-name = "VDD_ALIVE_1.1V";
|
||||||
|
regulator-min-microvolt = <1100000>;
|
||||||
|
regulator-max-microvolt = <1100000>;
|
||||||
|
regulator-always-on;
|
||||||
|
};
|
||||||
|
|
||||||
|
buck1_reg: BUCK1 {
|
||||||
|
regulator-name = "VDD_MIF_1.2V";
|
||||||
|
regulator-min-microvolt = <950000>;
|
||||||
|
regulator-max-microvolt = <1350000>;
|
||||||
|
regulator-always-on;
|
||||||
|
regulator-boot-on;
|
||||||
|
};
|
||||||
|
|
||||||
|
vemmc_reg: BUCK9 {
|
||||||
|
regulator-name = "VMEM_VDD_2.8V";
|
||||||
|
regulator-min-microvolt = <2800000>;
|
||||||
|
regulator-max-microvolt = <2800000>;
|
||||||
|
op_mode = <3>; /* Standby Mode */
|
||||||
|
s5m8767,pmic-ext-control-gpios = <&gpk0 2 0>;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
@ -9223,9 +9223,9 @@ F: drivers/regulator/s5m*.c
|
||||||
F: drivers/clk/clk-s2mps11.c
|
F: drivers/clk/clk-s2mps11.c
|
||||||
F: drivers/rtc/rtc-s5m.c
|
F: drivers/rtc/rtc-s5m.c
|
||||||
F: include/linux/mfd/samsung/
|
F: include/linux/mfd/samsung/
|
||||||
F: Documentation/devicetree/bindings/regulator/s5m8767-regulator.txt
|
|
||||||
F: Documentation/devicetree/bindings/mfd/samsung,sec-core.txt
|
F: Documentation/devicetree/bindings/mfd/samsung,sec-core.txt
|
||||||
F: Documentation/devicetree/bindings/regulator/samsung,s2m*.txt
|
F: Documentation/devicetree/bindings/regulator/samsung,s2m*.txt
|
||||||
|
F: Documentation/devicetree/bindings/regulator/samsung,s5m*.txt
|
||||||
F: Documentation/devicetree/bindings/clock/samsung,s2mps11.txt
|
F: Documentation/devicetree/bindings/clock/samsung,s2mps11.txt
|
||||||
|
|
||||||
SAMSUNG S5P/EXYNOS4 SOC SERIES CAMERA SUBSYSTEM DRIVERS
|
SAMSUNG S5P/EXYNOS4 SOC SERIES CAMERA SUBSYSTEM DRIVERS
|
||||||
|
|
|
||||||
Loading…
Reference in New Issue