i2c: s3c2410: Add support for pinctrl

This patch adds support for pin configuration using pinctrl subsystem
to the i2c-s3c2410 driver.

Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
This commit is contained in:
Tomasz Figa 2012-11-13 11:33:40 +01:00 committed by Wolfram Sang
parent a72ad456bb
commit 2693ac6988
2 changed files with 24 additions and 8 deletions

View File

@ -13,11 +13,17 @@ Required properties:
- interrupts: interrupt number to the cpu.
- samsung,i2c-sda-delay: Delay (in ns) applied to data line (SDA) edges.
Required for all cases except "samsung,s3c2440-hdmiphy-i2c":
- Samsung GPIO variant (deprecated):
- gpios: The order of the gpios should be the following: <SDA, SCL>.
The gpio specifier depends on the gpio controller. Required in all
cases except for "samsung,s3c2440-hdmiphy-i2c" whose input/output
lines are permanently wired to the respective clienta
- Pinctrl variant (preferred, if available):
- pinctrl-0: Pin control group to be used for this controller.
- pinctrl-names: Should contain only one value - "default".
Optional properties:
- gpios: The order of the gpios should be the following: <SDA, SCL>.
The gpio specifier depends on the gpio controller. Required in all
cases except for "samsung,s3c2440-hdmiphy-i2c" whose input/output
lines are permanently wired to the respective client
- samsung,i2c-slave-addr: Slave address in multi-master enviroment. If not
specified, default value is 0.
- samsung,i2c-max-bus-freq: Desired frequency in Hz of the bus. If not
@ -31,8 +37,14 @@ Example:
interrupts = <345>;
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <100000>;
/* Samsung GPIO variant begins here */
gpios = <&gpd1 2 0 /* SDA */
&gpd1 3 0 /* SCL */>;
/* Samsung GPIO variant ends here */
/* Pinctrl variant begins here */
pinctrl-0 = <&i2c3_bus>;
pinctrl-names = "default";
/* Pinctrl variant ends here */
#address-cells = <1>;
#size-cells = <0>;

View File

@ -38,6 +38,7 @@
#include <linux/io.h>
#include <linux/of_i2c.h>
#include <linux/of_gpio.h>
#include <linux/pinctrl/consumer.h>
#include <asm/irq.h>
@ -82,6 +83,7 @@ struct s3c24xx_i2c {
struct s3c2410_platform_i2c *pdata;
int gpios[2];
struct pinctrl *pctrl;
#ifdef CONFIG_CPU_FREQ
struct notifier_block freq_transition;
#endif
@ -860,9 +862,8 @@ static int s3c24xx_i2c_init(struct s3c24xx_i2c *i2c)
if (pdata->cfg_gpio)
pdata->cfg_gpio(to_platform_device(i2c->dev));
else
if (s3c24xx_i2c_parse_dt_gpio(i2c))
return -EINVAL;
else if (IS_ERR(i2c->pctrl) && s3c24xx_i2c_parse_dt_gpio(i2c))
return -EINVAL;
/* write slave address */
@ -1003,6 +1004,8 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev)
i2c->adap.algo_data = i2c;
i2c->adap.dev.parent = &pdev->dev;
i2c->pctrl = devm_pinctrl_get_select_default(i2c->dev);
/* initialise the i2c controller */
ret = s3c24xx_i2c_init(i2c);
@ -1092,7 +1095,8 @@ static int s3c24xx_i2c_remove(struct platform_device *pdev)
clk_disable_unprepare(i2c->clk);
clk_put(i2c->clk);
s3c24xx_i2c_dt_gpio_free(i2c);
if (pdev->dev.of_node && IS_ERR(i2c->pctrl))
s3c24xx_i2c_dt_gpio_free(i2c);
return 0;
}