drm/bridge: dw-hdmi: Add SCDC and TMDS Scrambling support
Add support for SCDC Setup for TMDS Clock > 3.4GHz and enable TMDS Scrambling when supported or mandatory. This patch also adds an helper to setup the control bit to support the high TMDS Bit Period/TMDS Clock-Period Ratio as required with TMDS Clock > 3.4GHz for HDMI2.0 3840x2160@60/50 modes. These changes were based on work done by Huicong Xu <xhc@rock-chips.com> and Nickey Yang <nickey.yang@rock-chips.com> to support HDMI2.0 modes on the Rockchip 4.4 BSP kernel at [1] [1] https://github.com/rockchip-linux/kernel/tree/release-4.4 Cc: Nickey Yang <nickey.yang@rock-chips.com> Cc: Huicong Xu <xhc@rock-chips.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Tested-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/1549022873-40549-2-git-send-email-narmstrong@baylibre.com
This commit is contained in:
parent
d60ea31a87
commit
264fce6cc2
|
@ -27,6 +27,7 @@
|
|||
#include <drm/drm_atomic_helper.h>
|
||||
#include <drm/drm_edid.h>
|
||||
#include <drm/drm_encoder_slave.h>
|
||||
#include <drm/drm_scdc_helper.h>
|
||||
#include <drm/drm_probe_helper.h>
|
||||
#include <drm/bridge/dw_hdmi.h>
|
||||
|
||||
|
@ -43,6 +44,11 @@
|
|||
|
||||
#define HDMI_EDID_LEN 512
|
||||
|
||||
/* DW-HDMI Controller >= 0x200a are at least compliant with SCDC version 1 */
|
||||
#define SCDC_MIN_SOURCE_VERSION 0x1
|
||||
|
||||
#define HDMI14_MAX_TMDSCLK 340000000
|
||||
|
||||
enum hdmi_datamap {
|
||||
RGB444_8B = 0x01,
|
||||
RGB444_10B = 0x03,
|
||||
|
@ -1015,6 +1021,33 @@ void dw_hdmi_phy_i2c_write(struct dw_hdmi *hdmi, unsigned short data,
|
|||
}
|
||||
EXPORT_SYMBOL_GPL(dw_hdmi_phy_i2c_write);
|
||||
|
||||
/*
|
||||
* HDMI2.0 Specifies the following procedure for High TMDS Bit Rates:
|
||||
* - The Source shall suspend transmission of the TMDS clock and data
|
||||
* - The Source shall write to the TMDS_Bit_Clock_Ratio bit to change it
|
||||
* from a 0 to a 1 or from a 1 to a 0
|
||||
* - The Source shall allow a minimum of 1 ms and a maximum of 100 ms from
|
||||
* the time the TMDS_Bit_Clock_Ratio bit is written until resuming
|
||||
* transmission of TMDS clock and data
|
||||
*
|
||||
* To respect the 100ms maximum delay, the dw_hdmi_set_high_tmds_clock_ratio()
|
||||
* helper should called right before enabling the TMDS Clock and Data in
|
||||
* the PHY configuration callback.
|
||||
*/
|
||||
void dw_hdmi_set_high_tmds_clock_ratio(struct dw_hdmi *hdmi)
|
||||
{
|
||||
unsigned long mtmdsclock = hdmi->hdmi_data.video_mode.mpixelclock;
|
||||
|
||||
/* Control for TMDS Bit Period/TMDS Clock-Period Ratio */
|
||||
if (hdmi->connector.display_info.hdmi.scdc.supported) {
|
||||
if (mtmdsclock > HDMI14_MAX_TMDSCLK)
|
||||
drm_scdc_set_high_tmds_clock_ratio(hdmi->ddc, 1);
|
||||
else
|
||||
drm_scdc_set_high_tmds_clock_ratio(hdmi->ddc, 0);
|
||||
}
|
||||
}
|
||||
EXPORT_SYMBOL_GPL(dw_hdmi_set_high_tmds_clock_ratio);
|
||||
|
||||
static void dw_hdmi_phy_enable_powerdown(struct dw_hdmi *hdmi, bool enable)
|
||||
{
|
||||
hdmi_mask_writeb(hdmi, !enable, HDMI_PHY_CONF0,
|
||||
|
@ -1216,6 +1249,8 @@ static int hdmi_phy_configure(struct dw_hdmi *hdmi)
|
|||
|
||||
dw_hdmi_phy_power_off(hdmi);
|
||||
|
||||
dw_hdmi_set_high_tmds_clock_ratio(hdmi);
|
||||
|
||||
/* Leave low power consumption mode by asserting SVSRET. */
|
||||
if (phy->has_svsret)
|
||||
dw_hdmi_phy_enable_svsret(hdmi, 1);
|
||||
|
@ -1237,6 +1272,10 @@ static int hdmi_phy_configure(struct dw_hdmi *hdmi)
|
|||
return ret;
|
||||
}
|
||||
|
||||
/* Wait for resuming transmission of TMDS clock and data */
|
||||
if (mpixelclock > HDMI14_MAX_TMDSCLK)
|
||||
msleep(100);
|
||||
|
||||
return dw_hdmi_phy_power_on(hdmi);
|
||||
}
|
||||
|
||||
|
@ -1504,7 +1543,8 @@ static void hdmi_config_vendor_specific_infoframe(struct dw_hdmi *hdmi,
|
|||
static void hdmi_av_composer(struct dw_hdmi *hdmi,
|
||||
const struct drm_display_mode *mode)
|
||||
{
|
||||
u8 inv_val;
|
||||
u8 inv_val, bytes;
|
||||
struct drm_hdmi_info *hdmi_info = &hdmi->connector.display_info.hdmi;
|
||||
struct hdmi_vmode *vmode = &hdmi->hdmi_data.video_mode;
|
||||
int hblank, vblank, h_de_hs, v_de_vs, hsync_len, vsync_len;
|
||||
unsigned int vdisplay;
|
||||
|
@ -1514,7 +1554,9 @@ static void hdmi_av_composer(struct dw_hdmi *hdmi,
|
|||
dev_dbg(hdmi->dev, "final pixclk = %d\n", vmode->mpixelclock);
|
||||
|
||||
/* Set up HDMI_FC_INVIDCONF */
|
||||
inv_val = (hdmi->hdmi_data.hdcp_enable ?
|
||||
inv_val = (hdmi->hdmi_data.hdcp_enable ||
|
||||
vmode->mpixelclock > HDMI14_MAX_TMDSCLK ||
|
||||
hdmi_info->scdc.scrambling.low_rates ?
|
||||
HDMI_FC_INVIDCONF_HDCP_KEEPOUT_ACTIVE :
|
||||
HDMI_FC_INVIDCONF_HDCP_KEEPOUT_INACTIVE);
|
||||
|
||||
|
@ -1563,6 +1605,45 @@ static void hdmi_av_composer(struct dw_hdmi *hdmi,
|
|||
vsync_len /= 2;
|
||||
}
|
||||
|
||||
/* Scrambling Control */
|
||||
if (hdmi_info->scdc.supported) {
|
||||
if (vmode->mpixelclock > HDMI14_MAX_TMDSCLK ||
|
||||
hdmi_info->scdc.scrambling.low_rates) {
|
||||
/*
|
||||
* HDMI2.0 Specifies the following procedure:
|
||||
* After the Source Device has determined that
|
||||
* SCDC_Present is set (=1), the Source Device should
|
||||
* write the accurate Version of the Source Device
|
||||
* to the Source Version field in the SCDCS.
|
||||
* Source Devices compliant shall set the
|
||||
* Source Version = 1.
|
||||
*/
|
||||
drm_scdc_readb(&hdmi->i2c->adap, SCDC_SINK_VERSION,
|
||||
&bytes);
|
||||
drm_scdc_writeb(&hdmi->i2c->adap, SCDC_SOURCE_VERSION,
|
||||
min_t(u8, bytes, SCDC_MIN_SOURCE_VERSION));
|
||||
|
||||
/* Enabled Scrambling in the Sink */
|
||||
drm_scdc_set_scrambling(&hdmi->i2c->adap, 1);
|
||||
|
||||
/*
|
||||
* To activate the scrambler feature, you must ensure
|
||||
* that the quasi-static configuration bit
|
||||
* fc_invidconf.HDCP_keepout is set at configuration
|
||||
* time, before the required mc_swrstzreq.tmdsswrst_req
|
||||
* reset request is issued.
|
||||
*/
|
||||
hdmi_writeb(hdmi, (u8)~HDMI_MC_SWRSTZ_TMDSSWRST_REQ,
|
||||
HDMI_MC_SWRSTZ);
|
||||
hdmi_writeb(hdmi, 1, HDMI_FC_SCRAMBLER_CTRL);
|
||||
} else {
|
||||
hdmi_writeb(hdmi, 0, HDMI_FC_SCRAMBLER_CTRL);
|
||||
hdmi_writeb(hdmi, (u8)~HDMI_MC_SWRSTZ_TMDSSWRST_REQ,
|
||||
HDMI_MC_SWRSTZ);
|
||||
drm_scdc_set_scrambling(&hdmi->i2c->adap, 0);
|
||||
}
|
||||
}
|
||||
|
||||
/* Set up horizontal active pixel width */
|
||||
hdmi_writeb(hdmi, mode->hdisplay >> 8, HDMI_FC_INHACTV1);
|
||||
hdmi_writeb(hdmi, mode->hdisplay, HDMI_FC_INHACTV0);
|
||||
|
|
|
@ -255,6 +255,7 @@
|
|||
#define HDMI_FC_MASK2 0x10DA
|
||||
#define HDMI_FC_POL2 0x10DB
|
||||
#define HDMI_FC_PRCONF 0x10E0
|
||||
#define HDMI_FC_SCRAMBLER_CTRL 0x10E1
|
||||
|
||||
#define HDMI_FC_GMD_STAT 0x1100
|
||||
#define HDMI_FC_GMD_EN 0x1101
|
||||
|
|
|
@ -159,6 +159,7 @@ void dw_hdmi_setup_rx_sense(struct dw_hdmi *hdmi, bool hpd, bool rx_sense);
|
|||
void dw_hdmi_set_sample_rate(struct dw_hdmi *hdmi, unsigned int rate);
|
||||
void dw_hdmi_audio_enable(struct dw_hdmi *hdmi);
|
||||
void dw_hdmi_audio_disable(struct dw_hdmi *hdmi);
|
||||
void dw_hdmi_set_high_tmds_clock_ratio(struct dw_hdmi *hdmi);
|
||||
|
||||
/* PHY configuration */
|
||||
void dw_hdmi_phy_i2c_set_addr(struct dw_hdmi *hdmi, u8 address);
|
||||
|
|
Loading…
Reference in New Issue