ide-pmac: use ide_tune_dma() (take 2)

* Add missing initialization of hwif->autodma and drive->autodma to
  pmac_ide_setup_dma().

* Use ide_tune_dma() in pmac_ide_dma_check().

While at it:

* Fix pmac_ide_dma_check() return value if DMA mode is not programmed
  (should be "-1" otherwise ide_set_dma() will try to enable DMA).

* Remove unnecessary drive->using_dma fiddling (->dma_off_quietly is always
  called before ide_set_dma() call and ide_set_dma() calls ->ide_dma_on if
  ->ide_dma_check returns "0").

v2:
* No reason to blacklist all ide_floppy devices and the old code was always
  enabling DMA anyway (without even programming controller/device if the
  device was ide_floppy).

Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
This commit is contained in:
Bartlomiej Zolnierkiewicz 2007-10-13 17:47:50 +02:00
parent aedea5910c
commit 254bb55036
1 changed files with 7 additions and 18 deletions

View File

@ -1593,24 +1593,10 @@ pmac_ide_destroy_dmatable (ide_drive_t *drive)
static int
pmac_ide_dma_check(ide_drive_t *drive)
{
int enable = 1;
if (ide_tune_dma(drive))
return 0;
drive->using_dma = 0;
if (drive->media == ide_floppy)
enable = 0;
if ((drive->id->capability & 1) == 0 && !__ide_dma_good_drive(drive))
enable = 0;
if (__ide_dma_bad_drive(drive))
enable = 0;
if (enable) {
u8 mode = ide_max_dma_mode(drive);
if (mode && pmac_ide_tune_chipset(drive, mode) == 0)
drive->using_dma = 1;
}
return 0;
return -1;
}
/*
@ -1844,7 +1830,10 @@ pmac_ide_setup_dma(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif)
hwif->mwdma_mask = 0x07;
hwif->swdma_mask = 0x00;
break;
}
}
hwif->autodma = 1;
hwif->drives[1].autodma = hwif->drives[0].autodma = hwif->autodma;
}
#endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */