wl12xx_sdio_test: rename files to match current style

Change some file names and Kconfig settings so that this new module matches
the new way of using wl12xx instead of wl1271.

Also fix SDIO power enabling and disabling to match the latest way of doing
it.

Cc: Roger Quadros <roger.quadros@nokia.com>
Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
This commit is contained in:
Luciano Coelho 2010-12-15 16:10:12 +02:00
parent 6742f554db
commit 248daa084c
3 changed files with 28 additions and 15 deletions

View File

@ -52,13 +52,15 @@ config WL12XX_SDIO
If you choose to build a module, it'll be called wl12xx_sdio.
Say N if unsure.
config WL1271_SDIO_TEST
tristate "TI wl1271 SDIO testing support"
depends on WL1271 && MMC
config WL12XX_SDIO_TEST
tristate "TI wl12xx SDIO testing support"
depends on WL12XX && MMC
default n
---help---
This module adds support for the SDIO bus testing with the
TI wl1271 chipset. Select this if your platform is using
the SDIO bus.
TI wl12xx chipsets. You probably don't want this unless you are
testing a new hardware platform. Select this if you want to test the
SDIO bus which is connected to the wl12xx chip.
config WL12XX_PLATFORM_DATA
bool

View File

@ -3,13 +3,14 @@ wl12xx-objs = main.o cmd.o io.o event.o tx.o rx.o ps.o acx.o \
wl12xx_spi-objs = spi.o
wl12xx_sdio-objs = sdio.o
wl12xx_sdio_test-objs = sdio_test.o
wl12xx-$(CONFIG_NL80211_TESTMODE) += testmode.o
obj-$(CONFIG_WL12XX) += wl12xx.o
obj-$(CONFIG_WL12XX_SPI) += wl12xx_spi.o
obj-$(CONFIG_WL12XX_SDIO) += wl12xx_sdio.o
obj-$(CONFIG_WL1271_SDIO_TEST) += wl1271_sdio_test.o
obj-$(CONFIG_WL12XX_SDIO_TEST) += wl12xx_sdio_test.o
# small builtin driver bit
obj-$(CONFIG_WL12XX_PLATFORM_DATA) += wl12xx_platform_data.o

View File

@ -1,11 +1,11 @@
/*
* wl1271_sdio_test.c - SDIO testing driver for wl1271
* SDIO testing driver for wl12xx
*
* Copyright (C) 2010 Nokia Corporation
*
* Contact: Roger Quadros <roger.quadros@nokia.com>
*
* wl1271 read/write routines taken from wl1271_sdio.c
* wl12xx read/write routines taken from the main module
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
@ -34,10 +34,11 @@
#include <linux/wl12xx.h>
#include <linux/kthread.h>
#include <linux/firmware.h>
#include <linux/pm_runtime.h>
#include "wl1271.h"
#include "wl1271_io.h"
#include "wl1271_boot.h"
#include "wl12xx.h"
#include "io.h"
#include "boot.h"
#ifndef SDIO_VENDOR_ID_TI
#define SDIO_VENDOR_ID_TI 0x0097
@ -130,22 +131,31 @@ static void wl1271_sdio_raw_write(struct wl1271 *wl, int addr, void *buf,
static int wl1271_sdio_set_power(struct wl1271 *wl, bool enable)
{
struct sdio_func *func = wl_to_func(wl);
int ret;
/* Let the SDIO stack handle wlan_enable control, so we
* keep host claimed while wlan is in use to keep wl1271
* alive.
*/
if (enable) {
sdio_claim_power(func);
/* Power up the card */
ret = pm_runtime_get_sync(&func->dev);
if (ret < 0)
goto out;
sdio_claim_host(func);
sdio_enable_func(func);
sdio_release_host(func);
} else {
sdio_claim_host(func);
sdio_disable_func(func);
sdio_release_host(func);
sdio_release_power(func);
/* Power down the card */
ret = pm_runtime_put_sync(&func->dev);
}
return 0;
out:
return ret;
}
static void wl1271_sdio_disable_interrupts(struct wl1271 *wl)
@ -481,7 +491,7 @@ static void __devexit wl1271_remove(struct sdio_func *func)
}
static struct sdio_driver wl1271_sdio_driver = {
.name = "wl1271_sdio_test",
.name = "wl12xx_sdio_test",
.id_table = wl1271_devices,
.probe = wl1271_probe,
.remove = __devexit_p(wl1271_remove),