diff --git a/arch/arm/mach-mx5/board-mx51_efikamx.c b/arch/arm/mach-mx5/board-mx51_efikamx.c index 8f173366b29c..acab1911cb3c 100644 --- a/arch/arm/mach-mx5/board-mx51_efikamx.c +++ b/arch/arm/mach-mx5/board-mx51_efikamx.c @@ -25,6 +25,9 @@ #include #include #include +#include +#include +#include #include #include @@ -56,6 +59,10 @@ #define EFIKAMX_RESET1_1 IMX_GPIO_NR(3, 2) #define EFIKAMX_RESET IMX_GPIO_NR(1, 4) +#define EFIKAMX_POWEROFF IMX_GPIO_NR(4, 13) + +#define EFIKAMX_PMIC IMX_GPIO_NR(1, 6) + /* the pci ids pin have pull up. they're driven low according to board id */ #define MX51_PAD_PCBID0 IOMUX_PAD(0x518, 0x130, 3, 0x0, 0, PAD_CTL_PUS_100K_UP) #define MX51_PAD_PCBID1 IOMUX_PAD(0x51C, 0x134, 3, 0x0, 0, PAD_CTL_PUS_100K_UP) @@ -79,6 +86,9 @@ static iomux_v3_cfg_t mx51efikamx_pads[] = { /* reset */ MX51_PAD_DI1_PIN13__GPIO3_2, MX51_PAD_GPIO1_4__GPIO1_4, + + /* power off */ + MX51_PAD_CSI2_VSYNC__GPIO4_13, }; /* PCBID2 PCBID1 PCBID0 STATE @@ -187,6 +197,46 @@ void mx51_efikamx_reset(void) gpio_direction_output(EFIKAMX_RESET, 0); } +static struct regulator *pwgt1, *pwgt2, *coincell; + +static void mx51_efikamx_power_off(void) +{ + if (!IS_ERR(coincell)) + regulator_disable(coincell); + + if (!IS_ERR(pwgt1) && !IS_ERR(pwgt2)) { + regulator_disable(pwgt2); + regulator_disable(pwgt1); + } + gpio_direction_output(EFIKAMX_POWEROFF, 1); +} + +static int __init mx51_efikamx_power_init(void) +{ + if (machine_is_mx51_efikamx()) { + pwgt1 = regulator_get(NULL, "pwgt1"); + pwgt2 = regulator_get(NULL, "pwgt2"); + if (!IS_ERR(pwgt1) && !IS_ERR(pwgt2)) { + regulator_enable(pwgt1); + regulator_enable(pwgt2); + } + gpio_request(EFIKAMX_POWEROFF, "poweroff"); + pm_power_off = mx51_efikamx_power_off; + + /* enable coincell charger. maybe need a small power driver ? */ + coincell = regulator_get(NULL, "coincell"); + if (!IS_ERR(coincell)) { + regulator_set_voltage(coincell, 3000000, 3000000); + regulator_enable(coincell); + } + + regulator_has_full_constraints(); + } + + return 0; +} +late_initcall(mx51_efikamx_power_init); + static void __init mx51_efikamx_init(void) { mxc_iomux_v3_setup_multiple_pads(mx51efikamx_pads, diff --git a/arch/arm/mach-mx5/mx51_efika.c b/arch/arm/mach-mx5/mx51_efika.c index c08ec63415e5..b4d5ae913ff8 100644 --- a/arch/arm/mach-mx5/mx51_efika.c +++ b/arch/arm/mach-mx5/mx51_efika.c @@ -23,6 +23,9 @@ #include #include #include +#include +#include +#include #include #include @@ -39,6 +42,7 @@ #include #include #include +#include #include "devices-imx51.h" #include "devices.h" @@ -54,6 +58,8 @@ #define EFIKAMX_SPI_CS0 IMX_GPIO_NR(4, 24) #define EFIKAMX_SPI_CS1 IMX_GPIO_NR(4, 25) +#define EFIKAMX_PMIC IMX_GPIO_NR(1, 6) + static iomux_v3_cfg_t mx51efika_pads[] = { /* UART1 */ MX51_PAD_UART1_RXD__UART1_RXD, @@ -90,6 +96,7 @@ static iomux_v3_cfg_t mx51efika_pads[] = { MX51_PAD_CSPI1_SS1__GPIO4_25, MX51_PAD_CSPI1_RDY__ECSPI1_RDY, MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK, + MX51_PAD_GPIO1_6__GPIO1_6, /* USB HOST1 */ MX51_PAD_USBH1_CLK__USBH1_CLK, @@ -238,6 +245,336 @@ static struct flash_platform_data mx51_efika_spi_flash_data = { .type = "sst25vf032b", }; +static struct regulator_consumer_supply sw1_consumers[] = { + { + .supply = "cpu_vcc", + } +}; + +static struct regulator_consumer_supply vdig_consumers[] = { + /* sgtl5000 */ + REGULATOR_SUPPLY("VDDA", "1-000a"), + REGULATOR_SUPPLY("VDDD", "1-000a"), +}; + +static struct regulator_consumer_supply vvideo_consumers[] = { + /* sgtl5000 */ + REGULATOR_SUPPLY("VDDIO", "1-000a"), +}; + +static struct regulator_consumer_supply vsd_consumers[] = { + REGULATOR_SUPPLY("vmmc", "sdhci-esdhc-imx.0"), + REGULATOR_SUPPLY("vmmc", "sdhci-esdhc-imx.1"), +}; + +static struct regulator_consumer_supply pwgt1_consumer[] = { + { + .supply = "pwgt1", + } +}; + +static struct regulator_consumer_supply pwgt2_consumer[] = { + { + .supply = "pwgt2", + } +}; + +static struct regulator_consumer_supply coincell_consumer[] = { + { + .supply = "coincell", + } +}; + +static struct regulator_init_data sw1_init = { + .constraints = { + .name = "SW1", + .min_uV = 600000, + .max_uV = 1375000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, + .valid_modes_mask = 0, + .always_on = 1, + .boot_on = 1, + .state_mem = { + .uV = 850000, + .mode = REGULATOR_MODE_NORMAL, + .enabled = 1, + }, + }, + .num_consumer_supplies = ARRAY_SIZE(sw1_consumers), + .consumer_supplies = sw1_consumers, +}; + +static struct regulator_init_data sw2_init = { + .constraints = { + .name = "SW2", + .min_uV = 900000, + .max_uV = 1850000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, + .always_on = 1, + .boot_on = 1, + .state_mem = { + .uV = 950000, + .mode = REGULATOR_MODE_NORMAL, + .enabled = 1, + }, + } +}; + +static struct regulator_init_data sw3_init = { + .constraints = { + .name = "SW3", + .min_uV = 1100000, + .max_uV = 1850000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, + .always_on = 1, + .boot_on = 1, + } +}; + +static struct regulator_init_data sw4_init = { + .constraints = { + .name = "SW4", + .min_uV = 1100000, + .max_uV = 1850000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, + .always_on = 1, + .boot_on = 1, + } +}; + +static struct regulator_init_data viohi_init = { + .constraints = { + .name = "VIOHI", + .boot_on = 1, + .always_on = 1, + } +}; + +static struct regulator_init_data vusb_init = { + .constraints = { + .name = "VUSB", + .boot_on = 1, + .always_on = 1, + } +}; + +static struct regulator_init_data swbst_init = { + .constraints = { + .name = "SWBST", + } +}; + +static struct regulator_init_data vdig_init = { + .constraints = { + .name = "VDIG", + .min_uV = 1050000, + .max_uV = 1800000, + .valid_ops_mask = + REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS, + .boot_on = 1, + .always_on = 1, + }, + .num_consumer_supplies = ARRAY_SIZE(vdig_consumers), + .consumer_supplies = vdig_consumers, +}; + +static struct regulator_init_data vpll_init = { + .constraints = { + .name = "VPLL", + .min_uV = 1050000, + .max_uV = 1800000, + .valid_ops_mask = + REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS, + .boot_on = 1, + .always_on = 1, + } +}; + +static struct regulator_init_data vusb2_init = { + .constraints = { + .name = "VUSB2", + .min_uV = 2400000, + .max_uV = 2775000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, + .boot_on = 1, + .always_on = 1, + } +}; + +static struct regulator_init_data vvideo_init = { + .constraints = { + .name = "VVIDEO", + .min_uV = 2775000, + .max_uV = 2775000, + .valid_ops_mask = + REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS, + .boot_on = 1, + .apply_uV = 1, + }, + .num_consumer_supplies = ARRAY_SIZE(vvideo_consumers), + .consumer_supplies = vvideo_consumers, +}; + +static struct regulator_init_data vaudio_init = { + .constraints = { + .name = "VAUDIO", + .min_uV = 2300000, + .max_uV = 3000000, + .valid_ops_mask = + REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS, + .boot_on = 1, + } +}; + +static struct regulator_init_data vsd_init = { + .constraints = { + .name = "VSD", + .min_uV = 1800000, + .max_uV = 3150000, + .valid_ops_mask = + REGULATOR_CHANGE_VOLTAGE, + .boot_on = 1, + }, + .num_consumer_supplies = ARRAY_SIZE(vsd_consumers), + .consumer_supplies = vsd_consumers, +}; + +static struct regulator_init_data vcam_init = { + .constraints = { + .name = "VCAM", + .min_uV = 2500000, + .max_uV = 3000000, + .valid_ops_mask = + REGULATOR_CHANGE_VOLTAGE | + REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, + .valid_modes_mask = REGULATOR_MODE_FAST | REGULATOR_MODE_NORMAL, + .boot_on = 1, + } +}; + +static struct regulator_init_data vgen1_init = { + .constraints = { + .name = "VGEN1", + .min_uV = 1200000, + .max_uV = 3150000, + .valid_ops_mask = + REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS, + .boot_on = 1, + .always_on = 1, + } +}; + +static struct regulator_init_data vgen2_init = { + .constraints = { + .name = "VGEN2", + .min_uV = 1200000, + .max_uV = 3150000, + .valid_ops_mask = + REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS, + .boot_on = 1, + .always_on = 1, + } +}; + +static struct regulator_init_data vgen3_init = { + .constraints = { + .name = "VGEN3", + .min_uV = 1800000, + .max_uV = 2900000, + .valid_ops_mask = + REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS, + .boot_on = 1, + .always_on = 1, + } +}; + +static struct regulator_init_data gpo1_init = { + .constraints = { + .name = "GPO1", + } +}; + +static struct regulator_init_data gpo2_init = { + .constraints = { + .name = "GPO2", + } +}; + +static struct regulator_init_data gpo3_init = { + .constraints = { + .name = "GPO3", + } +}; + +static struct regulator_init_data gpo4_init = { + .constraints = { + .name = "GPO4", + } +}; + +static struct regulator_init_data pwgt1_init = { + .constraints = { + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .boot_on = 1, + }, + .num_consumer_supplies = ARRAY_SIZE(pwgt1_consumer), + .consumer_supplies = pwgt1_consumer, +}; + +static struct regulator_init_data pwgt2_init = { + .constraints = { + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .boot_on = 1, + }, + .num_consumer_supplies = ARRAY_SIZE(pwgt2_consumer), + .consumer_supplies = pwgt2_consumer, +}; + +static struct regulator_init_data vcoincell_init = { + .constraints = { + .name = "COINCELL", + .min_uV = 3000000, + .max_uV = 3000000, + .valid_ops_mask = + REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(coincell_consumer), + .consumer_supplies = coincell_consumer, +}; + +static struct mc13xxx_regulator_init_data mx51_efika_regulators[] = { + { .id = MC13892_SW1, .init_data = &sw1_init }, + { .id = MC13892_SW2, .init_data = &sw2_init }, + { .id = MC13892_SW3, .init_data = &sw3_init }, + { .id = MC13892_SW4, .init_data = &sw4_init }, + { .id = MC13892_SWBST, .init_data = &swbst_init }, + { .id = MC13892_VIOHI, .init_data = &viohi_init }, + { .id = MC13892_VPLL, .init_data = &vpll_init }, + { .id = MC13892_VDIG, .init_data = &vdig_init }, + { .id = MC13892_VSD, .init_data = &vsd_init }, + { .id = MC13892_VUSB2, .init_data = &vusb2_init }, + { .id = MC13892_VVIDEO, .init_data = &vvideo_init }, + { .id = MC13892_VAUDIO, .init_data = &vaudio_init }, + { .id = MC13892_VCAM, .init_data = &vcam_init }, + { .id = MC13892_VGEN1, .init_data = &vgen1_init }, + { .id = MC13892_VGEN2, .init_data = &vgen2_init }, + { .id = MC13892_VGEN3, .init_data = &vgen3_init }, + { .id = MC13892_VUSB, .init_data = &vusb_init }, + { .id = MC13892_GPO1, .init_data = &gpo1_init }, + { .id = MC13892_GPO2, .init_data = &gpo2_init }, + { .id = MC13892_GPO3, .init_data = &gpo3_init }, + { .id = MC13892_GPO4, .init_data = &gpo4_init }, + { .id = MC13892_PWGT1SPI, .init_data = &pwgt1_init }, + { .id = MC13892_PWGT2SPI, .init_data = &pwgt2_init }, + { .id = MC13892_VCOINCELL, .init_data = &vcoincell_init }, +}; + +static struct mc13xxx_platform_data mx51_efika_mc13892_data = { + .flags = MC13XXX_USE_RTC | MC13XXX_USE_REGULATOR, + .num_regulators = ARRAY_SIZE(mx51_efika_regulators), + .regulators = mx51_efika_regulators, +}; + static struct spi_board_info mx51_efika_spi_board_info[] __initdata = { { .modalias = "m25p80", @@ -247,6 +584,14 @@ static struct spi_board_info mx51_efika_spi_board_info[] __initdata = { .platform_data = &mx51_efika_spi_flash_data, .irq = -1, }, + { + .modalias = "mc13892", + .max_speed_hz = 1000000, + .bus_num = 0, + .chip_select = 0, + .platform_data = &mx51_efika_mc13892_data, + .irq = gpio_to_irq(EFIKAMX_PMIC), + }, }; static int mx51_efika_spi_cs[] = { @@ -267,6 +612,18 @@ void __init efika_board_common_init(void) mx51_efika_usb(); imx51_add_sdhci_esdhc_imx(0, NULL); + /* FIXME: comes from original code. check this. */ + if (mx51_revision() < IMX_CHIP_REVISION_2_0) + sw2_init.constraints.state_mem.uV = 1100000; + else if (mx51_revision() == IMX_CHIP_REVISION_2_0) { + sw2_init.constraints.state_mem.uV = 1250000; + sw1_init.constraints.state_mem.uV = 1000000; + } + if (machine_is_mx51_efikasb()) + vgen1_init.constraints.max_uV = 1200000; + + gpio_request(EFIKAMX_PMIC, "pmic irq"); + gpio_direction_input(EFIKAMX_PMIC); spi_register_board_info(mx51_efika_spi_board_info, ARRAY_SIZE(mx51_efika_spi_board_info)); imx51_add_ecspi(0, &mx51_efika_spi_pdata);