hollalinux
/
linux-sg2042
mirror of https://github.com/sophgo/linux-riscv.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

ASoC: adau1701: allow configuration of PLL mode pins 

The ADAU1701 has 2 hardware pins to configure the PLL mode in accordance
to the MCLK-to-LRCLK ratio. These pins have to be stable before the chip
is released from reset, and a full reset cycle, including a new firmware
download is needed whenever they change.

This patch adds GPIO properties to the DT bindings of the Codec, and
implements makes the set_sysclk memorize the configured sysclk.

Because the run-time parameters are unknown at probe time, the first
firmware download is postponed to the first hw_params call, when the
driver can determine the mclk/lrclk divider. Subsequent downloads
are only issued when the divider configuration changes.

Signed-off-by: Daniel Mack <zonque@gmail.com>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
This commit is contained in:
Daniel Mack 2013-06-24 16:31:30 +02:00 committed by Mark Brown
parent de9fc724da
commit 2352d4bf43
2 changed files with 104 additions and 7 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

6
Documentation/devicetree/bindings/sound/adi,adau1701.txt
View File

@ -11,6 +11,11 @@ Optional properties:
- reset-gpio: A GPIO spec to define which pin is connected to the
chip's !RESET pin. If specified, the driver will
assert a hardware reset at probe time.
- adi,pll-mode-gpios: An array of two GPIO specs to describe the GPIOs
the ADAU's PLL config pins are connected to.
The state of the pins are set according to the
configured clock divider on ASoC side before the
firmware is loaded.
Examples:
@ -19,5 +24,6 @@ Examples:
compatible = "adi,adau1701";
reg = <0x34>;
reset-gpio = <&gpio 23 0>;
adi,pll-mode-gpios = <&gpio 24 0 &gpio 25 0>;
};
};

105
sound/soc/codecs/adau1701.c
View File

@ -87,11 +87,16 @@
#define ADAU1701_OSCIPOW_OPD 0x04
#define ADAU1701_DACSET_DACINIT 1
#define ADAU1707_CLKDIV_UNSET (-1UL)
#define ADAU1701_FIRMWARE "adau1701.bin"
struct adau1701 {
int gpio_nreset;
int gpio_pll_mode[2];
unsigned int dai_fmt;
unsigned int pll_clkdiv;
unsigned int sysclk;
};
static const struct snd_kcontrol_new adau1701_controls[] = {
@ -184,12 +189,38 @@ static unsigned int adau1701_read(struct snd_soc_codec *codec, unsigned int reg)
return value;
}
static int adau1701_reset(struct snd_soc_codec *codec)
static int adau1701_reset(struct snd_soc_codec *codec, unsigned int clkdiv)
{
struct adau1701 *adau1701 = snd_soc_codec_get_drvdata(codec);
struct i2c_client *client = to_i2c_client(codec->dev);
int ret;
if (clkdiv != ADAU1707_CLKDIV_UNSET &&
gpio_is_valid(adau1701->gpio_pll_mode[0]) &&
gpio_is_valid(adau1701->gpio_pll_mode[1])) {
switch (clkdiv) {
case 64:
gpio_set_value(adau1701->gpio_pll_mode[0], 0);
gpio_set_value(adau1701->gpio_pll_mode[1], 0);
break;
case 256:
gpio_set_value(adau1701->gpio_pll_mode[0], 0);
gpio_set_value(adau1701->gpio_pll_mode[1], 1);
break;
case 384:
gpio_set_value(adau1701->gpio_pll_mode[0], 1);
gpio_set_value(adau1701->gpio_pll_mode[1], 0);
break;
case 0: /* fallback */
case 512:
gpio_set_value(adau1701->gpio_pll_mode[0], 1);
gpio_set_value(adau1701->gpio_pll_mode[1], 1);
break;
}
}
adau1701->pll_clkdiv = clkdiv;
if (gpio_is_valid(adau1701->gpio_nreset)) {
gpio_set_value(adau1701->gpio_nreset, 0);
/* minimum reset time is 20ns */
@ -199,10 +230,16 @@ static int adau1701_reset(struct snd_soc_codec *codec)
mdelay(85);
}
ret = process_sigma_firmware(client, ADAU1701_FIRMWARE);
if (ret) {
dev_warn(codec->dev, "Failed to load firmware\n");
return ret;
/*
* Postpone the firmware download to a point in time when we
* know the correct PLL setup
*/
if (clkdiv != ADAU1707_CLKDIV_UNSET) {
ret = process_sigma_firmware(client, ADAU1701_FIRMWARE);
if (ret) {
dev_warn(codec->dev, "Failed to load firmware\n");
return ret;
}
}
snd_soc_write(codec, ADAU1701_DACSET, ADAU1701_DACSET_DACINIT);
@ -285,8 +322,22 @@ static int adau1701_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params, struct snd_soc_dai *dai)
{
struct snd_soc_codec *codec = dai->codec;
struct adau1701 *adau1701 = snd_soc_codec_get_drvdata(codec);
unsigned int clkdiv = adau1701->sysclk / params_rate(params);
snd_pcm_format_t format;
unsigned int val;
int ret;
/*
* If the mclk/lrclk ratio changes, the chip needs updated PLL
* mode GPIO settings, and a full reset cycle, including a new
* firmware upload.
*/
if (clkdiv != adau1701->pll_clkdiv) {
ret = adau1701_reset(codec, clkdiv);
if (ret < 0)
return ret;
}
switch (params_rate(params)) {
case 192000:
@ -429,6 +480,7 @@ static int adau1701_set_sysclk(struct snd_soc_codec *codec, int clk_id,
int source, unsigned int freq, int dir)
{
unsigned int val;
struct adau1701 *adau1701 = snd_soc_codec_get_drvdata(codec);
switch (clk_id) {
case ADAU1701_CLK_SRC_OSC:
@ -442,6 +494,7 @@ static int adau1701_set_sysclk(struct snd_soc_codec *codec, int clk_id,
}
snd_soc_update_bits(codec, ADAU1701_OSCIPOW, ADAU1701_OSCIPOW_OPD, val);
adau1701->sysclk = freq;
return 0;
}
@ -489,11 +542,21 @@ MODULE_DEVICE_TABLE(of, adau1701_dt_ids);
static int adau1701_probe(struct snd_soc_codec *codec)
{
int ret;
struct adau1701 *adau1701 = snd_soc_codec_get_drvdata(codec);
codec->control_data = to_i2c_client(codec->dev);
ret = adau1701_reset(codec);
if (ret)
/*
* Let the pll_clkdiv variable default to something that won't happen
* at runtime. That way, we can postpone the firmware download from
* adau1701_reset() to a point in time when we know the correct PLL
* mode parameters.
*/
adau1701->pll_clkdiv = ADAU1707_CLKDIV_UNSET;
/* initalize with pre-configured pll mode settings */
ret = adau1701_reset(codec, adau1701->pll_clkdiv);
if (ret < 0)
return ret;
return 0;
@ -526,6 +589,7 @@ static int adau1701_i2c_probe(struct i2c_client *client,
struct adau1701 *adau1701;
struct device *dev = &client->dev;
int gpio_nreset = -EINVAL;
int gpio_pll_mode[2] = { -EINVAL, -EINVAL };
int ret;
adau1701 = devm_kzalloc(dev, sizeof(*adau1701), GFP_KERNEL);
@ -536,6 +600,16 @@ static int adau1701_i2c_probe(struct i2c_client *client,
gpio_nreset = of_get_named_gpio(dev->of_node, "reset-gpio", 0);
if (gpio_nreset < 0 && gpio_nreset != -ENOENT)
return gpio_nreset;
gpio_pll_mode[0] = of_get_named_gpio(dev->of_node,
"adi,pll-mode-gpios", 0);
if (gpio_pll_mode[0] < 0 && gpio_pll_mode[0] != -ENOENT)
return gpio_pll_mode[0];
gpio_pll_mode[1] = of_get_named_gpio(dev->of_node,
"adi,pll-mode-gpios", 1);
if (gpio_pll_mode[1] < 0 && gpio_pll_mode[1] != -ENOENT)
return gpio_pll_mode[1];
}
if (gpio_is_valid(gpio_nreset)) {
@ -545,7 +619,24 @@ static int adau1701_i2c_probe(struct i2c_client *client,
return ret;
}
if (gpio_is_valid(gpio_pll_mode[0]) &&
gpio_is_valid(gpio_pll_mode[1])) {
ret = devm_gpio_request_one(dev, gpio_pll_mode[0],
GPIOF_OUT_INIT_LOW,
"ADAU1701 PLL mode 0");
if (ret < 0)
return ret;
ret = devm_gpio_request_one(dev, gpio_pll_mode[1],
GPIOF_OUT_INIT_LOW,
"ADAU1701 PLL mode 1");
if (ret < 0)
return ret;
}
adau1701->gpio_nreset = gpio_nreset;
adau1701->gpio_pll_mode[0] = gpio_pll_mode[0];
adau1701->gpio_pll_mode[1] = gpio_pll_mode[1];
i2c_set_clientdata(client, adau1701);
ret = snd_soc_register_codec(&client->dev, &adau1701_codec_drv,