Merge remote-tracking branch 'regulator/topic/palmas' into regulator-next
This commit is contained in:
commit
22eb85adaf
|
@ -26,11 +26,17 @@ Optional nodes:
|
|||
|
||||
For ti,palmas-pmic - smps12, smps123, smps3 depending on OTP,
|
||||
smps45, smps457, smps7 depending on variant, smps6, smps[8-9],
|
||||
smps10_out2, smps10_out1, do[1-9], ldoln, ldousb.
|
||||
smps10_out2, smps10_out1, ldo[1-9], ldoln, ldousb.
|
||||
|
||||
Optional sub-node properties:
|
||||
ti,warm-reset - maintain voltage during warm reset(boolean)
|
||||
ti,roof-floor - control voltage selection by pin(boolean)
|
||||
ti,roof-floor - This takes as optional argument on platform supporting
|
||||
the rail from desired external control. If there is no argument then
|
||||
it will be assume that it is controlled by NSLEEP pin.
|
||||
The valid value for external pins are:
|
||||
ENABLE1 then 1,
|
||||
ENABLE2 then 2 or
|
||||
NSLEEP then 3.
|
||||
ti,mode-sleep - mode to adopt in pmic sleep 0 - off, 1 - auto,
|
||||
2 - eco, 3 - forced pwm
|
||||
ti,smps-range - OTP has the wrong range set for the hardware so override
|
||||
|
@ -61,7 +67,7 @@ pmic {
|
|||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
ti,warm-reset;
|
||||
ti,roof-floor;
|
||||
ti,roof-floor = <1>; /* ENABLE1 control */
|
||||
ti,mode-sleep = <0>;
|
||||
ti,smps-range = <1>;
|
||||
};
|
||||
|
|
|
@ -33,6 +33,7 @@ struct regs_info {
|
|||
u8 vsel_addr;
|
||||
u8 ctrl_addr;
|
||||
u8 tstep_addr;
|
||||
int sleep_id;
|
||||
};
|
||||
|
||||
static const struct regs_info palmas_regs_info[] = {
|
||||
|
@ -42,6 +43,7 @@ static const struct regs_info palmas_regs_info[] = {
|
|||
.vsel_addr = PALMAS_SMPS12_VOLTAGE,
|
||||
.ctrl_addr = PALMAS_SMPS12_CTRL,
|
||||
.tstep_addr = PALMAS_SMPS12_TSTEP,
|
||||
.sleep_id = PALMAS_EXTERNAL_REQSTR_ID_SMPS12,
|
||||
},
|
||||
{
|
||||
.name = "SMPS123",
|
||||
|
@ -49,12 +51,14 @@ static const struct regs_info palmas_regs_info[] = {
|
|||
.vsel_addr = PALMAS_SMPS12_VOLTAGE,
|
||||
.ctrl_addr = PALMAS_SMPS12_CTRL,
|
||||
.tstep_addr = PALMAS_SMPS12_TSTEP,
|
||||
.sleep_id = PALMAS_EXTERNAL_REQSTR_ID_SMPS12,
|
||||
},
|
||||
{
|
||||
.name = "SMPS3",
|
||||
.sname = "smps3-in",
|
||||
.vsel_addr = PALMAS_SMPS3_VOLTAGE,
|
||||
.ctrl_addr = PALMAS_SMPS3_CTRL,
|
||||
.sleep_id = PALMAS_EXTERNAL_REQSTR_ID_SMPS3,
|
||||
},
|
||||
{
|
||||
.name = "SMPS45",
|
||||
|
@ -62,6 +66,7 @@ static const struct regs_info palmas_regs_info[] = {
|
|||
.vsel_addr = PALMAS_SMPS45_VOLTAGE,
|
||||
.ctrl_addr = PALMAS_SMPS45_CTRL,
|
||||
.tstep_addr = PALMAS_SMPS45_TSTEP,
|
||||
.sleep_id = PALMAS_EXTERNAL_REQSTR_ID_SMPS45,
|
||||
},
|
||||
{
|
||||
.name = "SMPS457",
|
||||
|
@ -69,6 +74,7 @@ static const struct regs_info palmas_regs_info[] = {
|
|||
.vsel_addr = PALMAS_SMPS45_VOLTAGE,
|
||||
.ctrl_addr = PALMAS_SMPS45_CTRL,
|
||||
.tstep_addr = PALMAS_SMPS45_TSTEP,
|
||||
.sleep_id = PALMAS_EXTERNAL_REQSTR_ID_SMPS45,
|
||||
},
|
||||
{
|
||||
.name = "SMPS6",
|
||||
|
@ -76,12 +82,14 @@ static const struct regs_info palmas_regs_info[] = {
|
|||
.vsel_addr = PALMAS_SMPS6_VOLTAGE,
|
||||
.ctrl_addr = PALMAS_SMPS6_CTRL,
|
||||
.tstep_addr = PALMAS_SMPS6_TSTEP,
|
||||
.sleep_id = PALMAS_EXTERNAL_REQSTR_ID_SMPS6,
|
||||
},
|
||||
{
|
||||
.name = "SMPS7",
|
||||
.sname = "smps7-in",
|
||||
.vsel_addr = PALMAS_SMPS7_VOLTAGE,
|
||||
.ctrl_addr = PALMAS_SMPS7_CTRL,
|
||||
.sleep_id = PALMAS_EXTERNAL_REQSTR_ID_SMPS7,
|
||||
},
|
||||
{
|
||||
.name = "SMPS8",
|
||||
|
@ -89,108 +97,128 @@ static const struct regs_info palmas_regs_info[] = {
|
|||
.vsel_addr = PALMAS_SMPS8_VOLTAGE,
|
||||
.ctrl_addr = PALMAS_SMPS8_CTRL,
|
||||
.tstep_addr = PALMAS_SMPS8_TSTEP,
|
||||
.sleep_id = PALMAS_EXTERNAL_REQSTR_ID_SMPS8,
|
||||
},
|
||||
{
|
||||
.name = "SMPS9",
|
||||
.sname = "smps9-in",
|
||||
.vsel_addr = PALMAS_SMPS9_VOLTAGE,
|
||||
.ctrl_addr = PALMAS_SMPS9_CTRL,
|
||||
.sleep_id = PALMAS_EXTERNAL_REQSTR_ID_SMPS9,
|
||||
},
|
||||
{
|
||||
.name = "SMPS10_OUT2",
|
||||
.sname = "smps10-in",
|
||||
.ctrl_addr = PALMAS_SMPS10_CTRL,
|
||||
.sleep_id = PALMAS_EXTERNAL_REQSTR_ID_SMPS10,
|
||||
},
|
||||
{
|
||||
.name = "SMPS10_OUT1",
|
||||
.sname = "smps10-out2",
|
||||
.ctrl_addr = PALMAS_SMPS10_CTRL,
|
||||
.sleep_id = PALMAS_EXTERNAL_REQSTR_ID_SMPS10,
|
||||
},
|
||||
{
|
||||
.name = "LDO1",
|
||||
.sname = "ldo1-in",
|
||||
.vsel_addr = PALMAS_LDO1_VOLTAGE,
|
||||
.ctrl_addr = PALMAS_LDO1_CTRL,
|
||||
.sleep_id = PALMAS_EXTERNAL_REQSTR_ID_LDO1,
|
||||
},
|
||||
{
|
||||
.name = "LDO2",
|
||||
.sname = "ldo2-in",
|
||||
.vsel_addr = PALMAS_LDO2_VOLTAGE,
|
||||
.ctrl_addr = PALMAS_LDO2_CTRL,
|
||||
.sleep_id = PALMAS_EXTERNAL_REQSTR_ID_LDO2,
|
||||
},
|
||||
{
|
||||
.name = "LDO3",
|
||||
.sname = "ldo3-in",
|
||||
.vsel_addr = PALMAS_LDO3_VOLTAGE,
|
||||
.ctrl_addr = PALMAS_LDO3_CTRL,
|
||||
.sleep_id = PALMAS_EXTERNAL_REQSTR_ID_LDO3,
|
||||
},
|
||||
{
|
||||
.name = "LDO4",
|
||||
.sname = "ldo4-in",
|
||||
.vsel_addr = PALMAS_LDO4_VOLTAGE,
|
||||
.ctrl_addr = PALMAS_LDO4_CTRL,
|
||||
.sleep_id = PALMAS_EXTERNAL_REQSTR_ID_LDO4,
|
||||
},
|
||||
{
|
||||
.name = "LDO5",
|
||||
.sname = "ldo5-in",
|
||||
.vsel_addr = PALMAS_LDO5_VOLTAGE,
|
||||
.ctrl_addr = PALMAS_LDO5_CTRL,
|
||||
.sleep_id = PALMAS_EXTERNAL_REQSTR_ID_LDO5,
|
||||
},
|
||||
{
|
||||
.name = "LDO6",
|
||||
.sname = "ldo6-in",
|
||||
.vsel_addr = PALMAS_LDO6_VOLTAGE,
|
||||
.ctrl_addr = PALMAS_LDO6_CTRL,
|
||||
.sleep_id = PALMAS_EXTERNAL_REQSTR_ID_LDO6,
|
||||
},
|
||||
{
|
||||
.name = "LDO7",
|
||||
.sname = "ldo7-in",
|
||||
.vsel_addr = PALMAS_LDO7_VOLTAGE,
|
||||
.ctrl_addr = PALMAS_LDO7_CTRL,
|
||||
.sleep_id = PALMAS_EXTERNAL_REQSTR_ID_LDO7,
|
||||
},
|
||||
{
|
||||
.name = "LDO8",
|
||||
.sname = "ldo8-in",
|
||||
.vsel_addr = PALMAS_LDO8_VOLTAGE,
|
||||
.ctrl_addr = PALMAS_LDO8_CTRL,
|
||||
.sleep_id = PALMAS_EXTERNAL_REQSTR_ID_LDO8,
|
||||
},
|
||||
{
|
||||
.name = "LDO9",
|
||||
.sname = "ldo9-in",
|
||||
.vsel_addr = PALMAS_LDO9_VOLTAGE,
|
||||
.ctrl_addr = PALMAS_LDO9_CTRL,
|
||||
.sleep_id = PALMAS_EXTERNAL_REQSTR_ID_LDO9,
|
||||
},
|
||||
{
|
||||
.name = "LDOLN",
|
||||
.sname = "ldoln-in",
|
||||
.vsel_addr = PALMAS_LDOLN_VOLTAGE,
|
||||
.ctrl_addr = PALMAS_LDOLN_CTRL,
|
||||
.sleep_id = PALMAS_EXTERNAL_REQSTR_ID_LDOLN,
|
||||
},
|
||||
{
|
||||
.name = "LDOUSB",
|
||||
.sname = "ldousb-in",
|
||||
.vsel_addr = PALMAS_LDOUSB_VOLTAGE,
|
||||
.ctrl_addr = PALMAS_LDOUSB_CTRL,
|
||||
.sleep_id = PALMAS_EXTERNAL_REQSTR_ID_LDOUSB,
|
||||
},
|
||||
{
|
||||
.name = "REGEN1",
|
||||
.ctrl_addr = PALMAS_REGEN1_CTRL,
|
||||
.sleep_id = PALMAS_EXTERNAL_REQSTR_ID_REGEN1,
|
||||
},
|
||||
{
|
||||
.name = "REGEN2",
|
||||
.ctrl_addr = PALMAS_REGEN2_CTRL,
|
||||
.sleep_id = PALMAS_EXTERNAL_REQSTR_ID_REGEN2,
|
||||
},
|
||||
{
|
||||
.name = "REGEN3",
|
||||
.ctrl_addr = PALMAS_REGEN3_CTRL,
|
||||
.sleep_id = PALMAS_EXTERNAL_REQSTR_ID_REGEN3,
|
||||
},
|
||||
{
|
||||
.name = "SYSEN1",
|
||||
.ctrl_addr = PALMAS_SYSEN1_CTRL,
|
||||
.sleep_id = PALMAS_EXTERNAL_REQSTR_ID_SYSEN1,
|
||||
},
|
||||
{
|
||||
.name = "SYSEN2",
|
||||
.ctrl_addr = PALMAS_SYSEN2_CTRL,
|
||||
.sleep_id = PALMAS_EXTERNAL_REQSTR_ID_SYSEN2,
|
||||
},
|
||||
};
|
||||
|
||||
|
@ -478,6 +506,17 @@ static struct regulator_ops palmas_ops_smps = {
|
|||
.set_ramp_delay = palmas_smps_set_ramp_delay,
|
||||
};
|
||||
|
||||
static struct regulator_ops palmas_ops_ext_control_smps = {
|
||||
.set_mode = palmas_set_mode_smps,
|
||||
.get_mode = palmas_get_mode_smps,
|
||||
.get_voltage_sel = regulator_get_voltage_sel_regmap,
|
||||
.set_voltage_sel = regulator_set_voltage_sel_regmap,
|
||||
.list_voltage = palmas_list_voltage_smps,
|
||||
.map_voltage = palmas_map_voltage_smps,
|
||||
.set_voltage_time_sel = palma_smps_set_voltage_smps_time_sel,
|
||||
.set_ramp_delay = palmas_smps_set_ramp_delay,
|
||||
};
|
||||
|
||||
static struct regulator_ops palmas_ops_smps10 = {
|
||||
.is_enabled = regulator_is_enabled_regmap,
|
||||
.enable = regulator_enable_regmap,
|
||||
|
@ -513,12 +552,37 @@ static struct regulator_ops palmas_ops_ldo = {
|
|||
.map_voltage = regulator_map_voltage_linear,
|
||||
};
|
||||
|
||||
static struct regulator_ops palmas_ops_ext_control_ldo = {
|
||||
.get_voltage_sel = regulator_get_voltage_sel_regmap,
|
||||
.set_voltage_sel = regulator_set_voltage_sel_regmap,
|
||||
.list_voltage = regulator_list_voltage_linear,
|
||||
.map_voltage = regulator_map_voltage_linear,
|
||||
};
|
||||
|
||||
static struct regulator_ops palmas_ops_extreg = {
|
||||
.is_enabled = regulator_is_enabled_regmap,
|
||||
.enable = regulator_enable_regmap,
|
||||
.disable = regulator_disable_regmap,
|
||||
};
|
||||
|
||||
static struct regulator_ops palmas_ops_ext_control_extreg = {
|
||||
};
|
||||
|
||||
static int palmas_regulator_config_external(struct palmas *palmas, int id,
|
||||
struct palmas_reg_init *reg_init)
|
||||
{
|
||||
int sleep_id = palmas_regs_info[id].sleep_id;
|
||||
int ret;
|
||||
|
||||
ret = palmas_ext_control_req_config(palmas, sleep_id,
|
||||
reg_init->roof_floor, true);
|
||||
if (ret < 0)
|
||||
dev_err(palmas->dev,
|
||||
"Ext control config for regulator %d failed %d\n",
|
||||
id, ret);
|
||||
return ret;
|
||||
}
|
||||
|
||||
/*
|
||||
* setup the hardware based sleep configuration of the SMPS/LDO regulators
|
||||
* from the platform data. This is different to the software based control
|
||||
|
@ -577,7 +641,22 @@ static int palmas_smps_init(struct palmas *palmas, int id,
|
|||
return ret;
|
||||
}
|
||||
|
||||
if (reg_init->roof_floor && (id != PALMAS_REG_SMPS10_OUT1) &&
|
||||
(id != PALMAS_REG_SMPS10_OUT2)) {
|
||||
/* Enable externally controlled regulator */
|
||||
addr = palmas_regs_info[id].ctrl_addr;
|
||||
ret = palmas_smps_read(palmas, addr, ®);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
if (!(reg & PALMAS_SMPS12_CTRL_MODE_ACTIVE_MASK)) {
|
||||
reg |= SMPS_CTRL_MODE_ON;
|
||||
ret = palmas_smps_write(palmas, addr, reg);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
}
|
||||
return palmas_regulator_config_external(palmas, id, reg_init);
|
||||
}
|
||||
return 0;
|
||||
}
|
||||
|
||||
|
@ -608,6 +687,20 @@ static int palmas_ldo_init(struct palmas *palmas, int id,
|
|||
if (ret)
|
||||
return ret;
|
||||
|
||||
if (reg_init->roof_floor) {
|
||||
/* Enable externally controlled regulator */
|
||||
addr = palmas_regs_info[id].ctrl_addr;
|
||||
ret = palmas_update_bits(palmas, PALMAS_LDO_BASE,
|
||||
addr, PALMAS_LDO1_CTRL_MODE_ACTIVE,
|
||||
PALMAS_LDO1_CTRL_MODE_ACTIVE);
|
||||
if (ret < 0) {
|
||||
dev_err(palmas->dev,
|
||||
"LDO Register 0x%02x update failed %d\n",
|
||||
addr, ret);
|
||||
return ret;
|
||||
}
|
||||
return palmas_regulator_config_external(palmas, id, reg_init);
|
||||
}
|
||||
return 0;
|
||||
}
|
||||
|
||||
|
@ -630,6 +723,21 @@ static int palmas_extreg_init(struct palmas *palmas, int id,
|
|||
addr, ret);
|
||||
return ret;
|
||||
}
|
||||
|
||||
if (reg_init->roof_floor) {
|
||||
/* Enable externally controlled regulator */
|
||||
addr = palmas_regs_info[id].ctrl_addr;
|
||||
ret = palmas_update_bits(palmas, PALMAS_RESOURCE_BASE,
|
||||
addr, PALMAS_REGEN1_CTRL_MODE_ACTIVE,
|
||||
PALMAS_REGEN1_CTRL_MODE_ACTIVE);
|
||||
if (ret < 0) {
|
||||
dev_err(palmas->dev,
|
||||
"Resource Register 0x%02x update failed %d\n",
|
||||
addr, ret);
|
||||
return ret;
|
||||
}
|
||||
return palmas_regulator_config_external(palmas, id, reg_init);
|
||||
}
|
||||
return 0;
|
||||
}
|
||||
|
||||
|
@ -712,7 +820,7 @@ static void palmas_dt_to_pdata(struct device *dev,
|
|||
int idx, ret;
|
||||
|
||||
node = of_node_get(node);
|
||||
regulators = of_find_node_by_name(node, "regulators");
|
||||
regulators = of_get_child_by_name(node, "regulators");
|
||||
if (!regulators) {
|
||||
dev_info(dev, "regulator node not found\n");
|
||||
return;
|
||||
|
@ -740,9 +848,35 @@ static void palmas_dt_to_pdata(struct device *dev,
|
|||
of_property_read_bool(palmas_matches[idx].of_node,
|
||||
"ti,warm-reset");
|
||||
|
||||
pdata->reg_init[idx]->roof_floor =
|
||||
of_property_read_bool(palmas_matches[idx].of_node,
|
||||
"ti,roof-floor");
|
||||
ret = of_property_read_u32(palmas_matches[idx].of_node,
|
||||
"ti,roof-floor", &prop);
|
||||
/* EINVAL: Property not found */
|
||||
if (ret != -EINVAL) {
|
||||
int econtrol;
|
||||
|
||||
/* use default value, when no value is specified */
|
||||
econtrol = PALMAS_EXT_CONTROL_NSLEEP;
|
||||
if (!ret) {
|
||||
switch (prop) {
|
||||
case 1:
|
||||
econtrol = PALMAS_EXT_CONTROL_ENABLE1;
|
||||
break;
|
||||
case 2:
|
||||
econtrol = PALMAS_EXT_CONTROL_ENABLE2;
|
||||
break;
|
||||
case 3:
|
||||
econtrol = PALMAS_EXT_CONTROL_NSLEEP;
|
||||
break;
|
||||
default:
|
||||
WARN_ON(1);
|
||||
dev_warn(dev,
|
||||
"%s: Invalid roof-floor option: %u\n",
|
||||
palmas_matches[idx].name, prop);
|
||||
break;
|
||||
}
|
||||
}
|
||||
pdata->reg_init[idx]->roof_floor = econtrol;
|
||||
}
|
||||
|
||||
ret = of_property_read_u32(palmas_matches[idx].of_node,
|
||||
"ti,mode-sleep", &prop);
|
||||
|
@ -869,6 +1003,8 @@ static int palmas_regulators_probe(struct platform_device *pdev)
|
|||
ret = palmas_smps_init(palmas, id, reg_init);
|
||||
if (ret)
|
||||
return ret;
|
||||
} else {
|
||||
reg_init = NULL;
|
||||
}
|
||||
|
||||
/* Register the regulators */
|
||||
|
@ -913,6 +1049,10 @@ static int palmas_regulators_probe(struct platform_device *pdev)
|
|||
if (reg & PALMAS_SMPS12_VOLTAGE_RANGE)
|
||||
pmic->range[id] = 1;
|
||||
|
||||
if (reg_init && reg_init->roof_floor)
|
||||
pmic->desc[id].ops =
|
||||
&palmas_ops_ext_control_smps;
|
||||
else
|
||||
pmic->desc[id].ops = &palmas_ops_smps;
|
||||
pmic->desc[id].n_voltages = PALMAS_SMPS_NUM_VOLTAGES;
|
||||
pmic->desc[id].vsel_reg =
|
||||
|
@ -956,6 +1096,10 @@ static int palmas_regulators_probe(struct platform_device *pdev)
|
|||
|
||||
/* Start this loop from the id left from previous loop */
|
||||
for (; id < PALMAS_NUM_REGS; id++) {
|
||||
if (pdata && pdata->reg_init[id])
|
||||
reg_init = pdata->reg_init[id];
|
||||
else
|
||||
reg_init = NULL;
|
||||
|
||||
/* Miss out regulators which are not available due
|
||||
* to alternate functions.
|
||||
|
@ -969,6 +1113,10 @@ static int palmas_regulators_probe(struct platform_device *pdev)
|
|||
|
||||
if (id < PALMAS_REG_REGEN1) {
|
||||
pmic->desc[id].n_voltages = PALMAS_LDO_NUM_VOLTAGES;
|
||||
if (reg_init && reg_init->roof_floor)
|
||||
pmic->desc[id].ops =
|
||||
&palmas_ops_ext_control_ldo;
|
||||
else
|
||||
pmic->desc[id].ops = &palmas_ops_ldo;
|
||||
pmic->desc[id].min_uV = 900000;
|
||||
pmic->desc[id].uV_step = 50000;
|
||||
|
@ -999,6 +1147,10 @@ static int palmas_regulators_probe(struct platform_device *pdev)
|
|||
pmic->desc[id].enable_time = 2000;
|
||||
} else {
|
||||
pmic->desc[id].n_voltages = 1;
|
||||
if (reg_init && reg_init->roof_floor)
|
||||
pmic->desc[id].ops =
|
||||
&palmas_ops_ext_control_extreg;
|
||||
else
|
||||
pmic->desc[id].ops = &palmas_ops_extreg;
|
||||
pmic->desc[id].enable_reg =
|
||||
PALMAS_BASE_TO_REG(PALMAS_RESOURCE_BASE,
|
||||
|
|
Loading…
Reference in New Issue