ucc_geth: Do not bring the whole IF down when TX failure.

ucc_geth_close lacks a cancel_work_sync(&ugeth->timeout_work)
to stop any outstanding processing of TX fail. However, one
can not call cancel_work_sync without fixing the timeout function
otherwise it will deadlock. This patch brings ucc_geth in line with
gianfar:

Don't bring the interface down and up, just reinit controller HW
and PHY.

Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
Reviewed-by: Anton Vorontsov <cbouatmailru@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Joakim Tjernlund 2010-11-12 03:55:08 +00:00 committed by David S. Miller
parent 1f18b7176e
commit 2040bd57b5
1 changed files with 9 additions and 6 deletions

View File

@ -2065,9 +2065,6 @@ static void ucc_geth_stop(struct ucc_geth_private *ugeth)
/* Disable Rx and Tx */
clrbits32(&ug_regs->maccfg1, MACCFG1_ENABLE_RX | MACCFG1_ENABLE_TX);
phy_disconnect(ugeth->phydev);
ugeth->phydev = NULL;
ucc_geth_memclean(ugeth);
}
@ -3550,7 +3547,10 @@ static int ucc_geth_close(struct net_device *dev)
napi_disable(&ugeth->napi);
cancel_work_sync(&ugeth->timeout_work);
ucc_geth_stop(ugeth);
phy_disconnect(ugeth->phydev);
ugeth->phydev = NULL;
free_irq(ugeth->ug_info->uf_info.irq, ugeth->ndev);
@ -3579,8 +3579,12 @@ static void ucc_geth_timeout_work(struct work_struct *work)
* Must reset MAC *and* PHY. This is done by reopening
* the device.
*/
ucc_geth_close(dev);
ucc_geth_open(dev);
netif_tx_stop_all_queues(dev);
ucc_geth_stop(ugeth);
ucc_geth_init_mac(ugeth);
/* Must start PHY here */
phy_start(ugeth->phydev);
netif_tx_start_all_queues(dev);
}
netif_tx_schedule_all(dev);
@ -3594,7 +3598,6 @@ static void ucc_geth_timeout(struct net_device *dev)
{
struct ucc_geth_private *ugeth = netdev_priv(dev);
netif_carrier_off(dev);
schedule_work(&ugeth->timeout_work);
}