From 1f5f0f2a9511451c184fdde42bc4455cb902be0e Mon Sep 17 00:00:00 2001 From: Christian Lamparter Date: Fri, 14 Jul 2017 16:14:09 +0200 Subject: [PATCH] dt-bindings: pinctrl: add most other IPQ4019 pin functions and groups This patch adds the remaining pin functions and mux groups. All unknown and debug functions are omitted. Existing functions for qpic, sdio, rgmii, rmii, wifi/d are squashed together as much as possible. And only in case of a clash, the individually named functions have been kept. The exceptions are: led0-11 i2s_rx, i2s_tx, i2s_td, i2s_spdif_in, i2s_spdif_out, smart0-3 Cc: Varadarajan Narayanan Cc: Ram Chandra Jangir Cc: John Crispin Acked-by: Rob Herring Signed-off-by: Christian Lamparter Acked-by: Bjorn Andersson Signed-off-by: Linus Walleij --- .../devicetree/bindings/pinctrl/qcom,ipq4019-pinctrl.txt | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq4019-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,ipq4019-pinctrl.txt index cfb8500dd56b..93374f478b9e 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,ipq4019-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq4019-pinctrl.txt @@ -50,7 +50,11 @@ Valid values for qcom,pins are: Supports mux, bias and drive-strength Valid values for qcom,function are: -gpio, blsp_uart1, blsp_i2c0, blsp_i2c1, blsp_uart0, blsp_spi1, blsp_spi0 +aud_pin, audio_pwm, blsp_i2c0, blsp_i2c1, blsp_spi0, blsp_spi1, blsp_uart0, +blsp_uart1, chip_rst, gpio, i2s_rx, i2s_spdif_in, i2s_spdif_out, i2s_td, i2s_tx, +jtag, led0, led1, led2, led3, led4, led5, led6, led7, led8, led9, led10, led11, +mdc, mdio, pcie, pmu, prng_rosc, qpic, rgmii, rmii, sdio, smart0, smart1, +smart2, smart3, tm, wifi0, wifi1 Example: