tty: serial: imx: remove imx_disable_rx_int
Since imx_disable_rx_int is only called by imx_startup, let's integrate it into that function. Notice UCR2_ATEN is never set by the driver. The bit is still cleaned to make this patch a noop. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Acked-by: Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
parent
d3a96c9416
commit
1f043572cb
|
@ -703,25 +703,6 @@ out:
|
|||
return IRQ_HANDLED;
|
||||
}
|
||||
|
||||
static void imx_disable_rx_int(struct imx_port *sport)
|
||||
{
|
||||
unsigned long temp;
|
||||
|
||||
/* disable the receiver ready and aging timer interrupts */
|
||||
temp = readl(sport->port.membase + UCR1);
|
||||
temp &= ~(UCR1_RRDYEN);
|
||||
writel(temp, sport->port.membase + UCR1);
|
||||
|
||||
temp = readl(sport->port.membase + UCR2);
|
||||
temp &= ~(UCR2_ATEN);
|
||||
writel(temp, sport->port.membase + UCR2);
|
||||
|
||||
/* disable the rx errors interrupts */
|
||||
temp = readl(sport->port.membase + UCR4);
|
||||
temp &= ~UCR4_OREN;
|
||||
writel(temp, sport->port.membase + UCR4);
|
||||
}
|
||||
|
||||
static void clear_rx_errors(struct imx_port *sport);
|
||||
|
||||
/*
|
||||
|
@ -1252,18 +1233,21 @@ static int imx_startup(struct uart_port *port)
|
|||
if (sport->dma_is_inited && !sport->dma_is_enabled)
|
||||
imx_enable_dma(sport);
|
||||
|
||||
temp = readl(sport->port.membase + UCR1);
|
||||
temp |= UCR1_RRDYEN | UCR1_UARTEN;
|
||||
temp = readl(sport->port.membase + UCR1) & ~UCR1_RRDYEN;
|
||||
if (!sport->dma_is_enabled)
|
||||
temp |= UCR1_RRDYEN;
|
||||
temp |= UCR1_UARTEN;
|
||||
if (sport->have_rtscts)
|
||||
temp |= UCR1_RTSDEN;
|
||||
|
||||
writel(temp, sport->port.membase + UCR1);
|
||||
|
||||
temp = readl(sport->port.membase + UCR4);
|
||||
temp |= UCR4_OREN;
|
||||
temp = readl(sport->port.membase + UCR4) & ~UCR4_OREN;
|
||||
if (!sport->dma_is_enabled)
|
||||
temp |= UCR4_OREN;
|
||||
writel(temp, sport->port.membase + UCR4);
|
||||
|
||||
temp = readl(sport->port.membase + UCR2);
|
||||
temp = readl(sport->port.membase + UCR2) & ~UCR2_ATEN;
|
||||
temp |= (UCR2_RXEN | UCR2_TXEN);
|
||||
if (!sport->have_rtscts)
|
||||
temp |= UCR2_IRTS;
|
||||
|
@ -1297,10 +1281,8 @@ static int imx_startup(struct uart_port *port)
|
|||
* In our iMX53 the average delay for the first reception dropped from
|
||||
* approximately 35000 microseconds to 1000 microseconds.
|
||||
*/
|
||||
if (sport->dma_is_enabled) {
|
||||
imx_disable_rx_int(sport);
|
||||
if (sport->dma_is_enabled)
|
||||
start_rx_dma(sport);
|
||||
}
|
||||
|
||||
spin_unlock_irqrestore(&sport->port.lock, flags);
|
||||
|
||||
|
|
Loading…
Reference in New Issue