PCI: Lengthen reset delay for VideoPropulsion Torrent QN16e card
[ Upstream commitc9260693aa
] Commitac91e69805
("PCI: Unify delay handling for reset and resume") shortened an unconditional 1 sec delay after a Secondary Bus Reset to 100 msec for PCIe (per PCIe r6.1 sec 6.6.1). The 1 sec delay is only required for Conventional PCI. But it turns out that there are PCIe devices which require a longer delay than prescribed before first config space access after reset recovery or resume from D3cold: Chad reports that a "VideoPropulsion Torrent QN16e" MPEG QAM Modulator "raises a PCI system error (PERR), as reported by the IPMI event log, and the hardware itself would suffer a catastrophic event, cycling the server" unless the longer delay is observed. The card is specified to conform to PCIe r1.0 and indeed only supports Gen1 speed (2.5 GT/s) according to lspci. PCIe r1.0 sec 7.6 prescribes the same 100 msec delay as PCIe r6.1 sec 6.6.1: To allow components to perform internal initialization, system software must wait for at least 100 ms from the end of a reset (cold/warm/hot) before it is permitted to issue Configuration Requests The behavior of the Torrent QN16e card thus appears to be a quirk. Treat it as such and lengthen the reset delay for this specific device. Fixes:ac91e69805
("PCI: Unify delay handling for reset and resume") Link: https://lore.kernel.org/r/47727e792c7f0282dc144e3ec8ce8eb6e713394e.1695304512.git.lukas@wunner.de Reported-by: Chad Schroeder <CSchroeder@sonifi.com> Closes: https://lore.kernel.org/linux-pci/DM6PR16MB2844903E34CAB910082DF019B1FAA@DM6PR16MB2844.namprd16.prod.outlook.com/ Tested-by: Chad Schroeder <CSchroeder@sonifi.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: stable@vger.kernel.org # v5.4+ Signed-off-by: Sasha Levin <sashal@kernel.org>
This commit is contained in:
parent
7545ddda9c
commit
1c8f75ee92
|
@ -6058,3 +6058,15 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x9a2d, dpc_log_size);
|
|||
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x9a2f, dpc_log_size);
|
||||
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x9a31, dpc_log_size);
|
||||
#endif
|
||||
|
||||
/*
|
||||
* Devices known to require a longer delay before first config space access
|
||||
* after reset recovery or resume from D3cold:
|
||||
*
|
||||
* VideoPropulsion (aka Genroco) Torrent QN16e MPEG QAM Modulator
|
||||
*/
|
||||
static void pci_fixup_d3cold_delay_1sec(struct pci_dev *pdev)
|
||||
{
|
||||
pdev->d3cold_delay = 1000;
|
||||
}
|
||||
DECLARE_PCI_FIXUP_FINAL(0x5555, 0x0004, pci_fixup_d3cold_delay_1sec);
|
||||
|
|
Loading…
Reference in New Issue