Renesas ARM-based SoC DT updates for v3.12

* Reference implementation for kzm9d board
 * Add MMCIF and SDHI DT templates for r8a7790 and r8a73a4 SoCs
 * Use DT for SMP and GIC initialisation on emev2 SoC and kzm9d board
 * Add GIO to dtsi of emev2 SoC
 * Update dts command line of kzm9d board
 * Add CPUFreq support to ape6evm board
 * Add I2C controller DT nodes to r8a73a4 SoC
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJR7N5oAAoJENfPZGlqN0++WgoP/2R95Zo4PS38ZuD3oD0HhhaQ
 jCp/8dOxxv19Nkd4/xJ8dwD0TxBCdUUr3CsIgrr2T8x8V1HTk9IcndrlFEcQ9zUj
 A+CGl1YcRAsUaUB85yLOv1bKh7UoKNZ1NldyGzvjbOrK+dOKCqOE2njE3SmOnDiC
 oe44e/6ROdxmlqTeb8RRfhVE5zUgHzeGo/ZF7yFIXR1n7hGUiDmdSc4UgDJDnyMs
 aPvHJS8iLqapy9bFsf8vpUWfpiYwossJsCdTqAxNT0jrh0/+Swtuuzqavntz1lSs
 dfxk9+UTM/yvzL5RtnWnX7Ud3qaOcomMc5ZUAl7lSZNSxOpWEv8+zk4lQy5azxcG
 AFewNMUuE7FnxJg9e+wIMc3D0k9WG9Ce4ENvOmgnnFMxooMkyECy6dmfv9NCfjBe
 rQzFb/KIn7aeghbYfLrapm9vnkhdlfZwK3VOqo0VSpYqtycgZ2PVcgFBLFQstCPm
 ElEqHoctuQMYkHQg8u9sjQFiDXNnuCilX6o/W0JMbsZP7ecqpFRWT9mwtlUy+90t
 64Cprx0qtBKQhuIW8Po6+LZokP2MXYhZTWllrx8CM1B/LQE8/eVu5U4zX6GsghxQ
 vCrGDVvcDtgzv3didLAW37J630hIDM4hhnKjbg08OSkNDI5WY6HXyl76IoexbAvR
 Vn1iIGzoIPOq+4k6s67f
 =7Bri
 -----END PGP SIGNATURE-----

Merge tag 'renesas-dt-for-v3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt

From Simon Horman:
Renesas ARM-based SoC DT updates for v3.12

* Reference implementation for kzm9d board
* Add MMCIF and SDHI DT templates for r8a7790 and r8a73a4 SoCs
* Use DT for SMP and GIC initialisation on emev2 SoC and kzm9d board
* Add GIO to dtsi of emev2 SoC
* Update dts command line of kzm9d board
* Add CPUFreq support to ape6evm board
* Add I2C controller DT nodes to r8a73a4 SoC

* tag 'renesas-dt-for-v3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (33 commits)
  ARM: shmobile: Add SMSC ethernet chip to KZM9D DT reference
  ARM: shmobile: KZM9D DT reference implementation
  ARM: shmobile: r8a7790: add MMCIF and SDHI DT templates
  ARM: shmobile: r8a73a4: add MMCIF and SDHI DT templates
  ARM: shmobile: EMEV2 map_io update
  ARM: shmobile: Use DT for SMP on EMEV2 and KZM9D
  ARM: shmobile: Use DT for GIC on EMEV2 and KZM9D
  ARM: shmobile: Add GIO to EMEV2 dtsi
  ARM: shmobile: Update KZM9D dts command line
  ARM: shmobile: ape6evm: add CPUFreq support
  ARM: shmobile: r8a73a4: add I2C controller DT nodes
  ARM: shmobile: Remove unused mach/dma.h
  ARM: shmobile: r8a7778: remove r8a7778_init_irq()
  ARM: shmobile: Fix EMEV2 clock comment typo
  ARM: shmobile: Make EMEV2 platform devices more compact
  ARM: shmobile: Remove unused EMEV2/KZM9D early console
  ARM: shmobile: Remove redundant r8a7790 callback
  ARM: shmobile: Remove unused sh73a0 auxdata table
  ARM: shmobile: Remove unused sh7372 auxdata table
  ARM: shmobile: Remove unused r8a7779 auxdata table
  ...

Signed-off-by: Olof Johansson <olof@lixom.net>

arch/arm/boot/dts/Makefile

@@ -183,6 +183,7 @@ dtb-$(CONFIG_ARCH_U8500) += snowball.dtb \
 	ccu9540.dtb
 dtb-$(CONFIG_ARCH_S3C24XX) += s3c2416-smdk2416.dtb
 dtb-$(CONFIG_ARCH_SHMOBILE) += emev2-kzm9d.dtb \
+	emev2-kzm9d-reference.dtb \
 	r8a7740-armadillo800eva.dtb \
 	r8a7778-bockw.dtb \
 	r8a7740-armadillo800eva-reference.dtb \

arch/arm/boot/dts/emev2-kzm9d-reference.dts

@@ -0,0 +1,57 @@
+/*
+ * Device Tree Source for the KZM9D board
+ *
+ * Copyright (C) 2013 Renesas Solutions Corp.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+/dts-v1/;
+
+/include/ "emev2.dtsi"
+
+/ {
+	model = "EMEV2 KZM9D Board";
+	compatible = "renesas,kzm9d-reference", "renesas,emev2";
+
+	memory {
+		device_type = "memory";
+		reg = <0x40000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS1,115200n81 ignore_loglevel root=/dev/nfs ip=dhcp nfsroot=,rsize=4096,wsize=4096";
+	};
+
+	reg_1p8v: regulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	reg_3p3v: regulator@1 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	lan9220@20000000 {
+		compatible = "smsc,lan9220", "smsc,lan9115";
+		reg = <0x20000000 0x10000>;
+		phy-mode = "mii";
+		interrupt-parent = <&gpio0>;
+		interrupts = <1 1>;	/* active high */
+		reg-io-width = <4>;
+		smsc,irq-active-high;
+		smsc,irq-push-pull;
+		vddvario-supply = <&reg_1p8v>;
+		vdd33a-supply = <&reg_3p3v>;
+	};
+};

arch/arm/boot/dts/emev2-kzm9d.dts

@@ -21,6 +21,6 @@
 	};
 
 	chosen {
-		bootargs = "console=tty0 console=ttyS1,115200n81 earlyprintk=serial8250-em.1,115200n81 mem=128M@0x40000000 ignore_loglevel root=/dev/nfs ip=dhcp nfsroot=,rsize=4096,wsize=4096";
+		bootargs = "console=ttyS1,115200n81 ignore_loglevel root=/dev/nfs ip=dhcp nfsroot=,rsize=4096,wsize=4096";
 	};
 };

arch/arm/boot/dts/emev2.dtsi

@@ -14,6 +14,14 @@
 	compatible = "renesas,emev2";
 	interrupt-parent = <&gic>;
 
+	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+		gpio3 = &gpio3;
+		gpio4 = &gpio4;
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -67,4 +75,55 @@
 		reg = <0xe1050000 0x38>;
 		interrupts = <0 11 0>;
 	};
+
+	gpio0: gpio@e0050000 {
+		compatible = "renesas,em-gio";
+		reg = <0xe0050000 0x2c>, <0xe0050040 0x20>;
+		interrupts = <0 67 0>, <0 68 0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		ngpios = <32>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+	gpio1: gpio@e0050080 {
+		compatible = "renesas,em-gio";
+		reg = <0xe0050080 0x2c>, <0xe00500c0 0x20>;
+		interrupts = <0 69 0>, <0 70 0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		ngpios = <32>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+	gpio2: gpio@e0050100 {
+		compatible = "renesas,em-gio";
+		reg = <0xe0050100 0x2c>, <0xe0050140 0x20>;
+		interrupts = <0 71 0>, <0 72 0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		ngpios = <32>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+	gpio3: gpio@e0050180 {
+		compatible = "renesas,em-gio";
+		reg = <0xe0050180 0x2c>, <0xe00501c0 0x20>;
+		interrupts = <0 73 0>, <0 74 0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		ngpios = <32>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+	gpio4: gpio@e0050200 {
+		compatible = "renesas,em-gio";
+		reg = <0xe0050200 0x2c>, <0xe0050240 0x20>;
+		interrupts = <0 75 0>, <0 76 0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		ngpios = <31>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
 };

arch/arm/boot/dts/r8a73a4-ape6evm.dts

@@ -50,3 +50,25 @@
 		};
 	};
 };
+
+&i2c5 {
+	vdd_dvfs: max8973@1b {
+		compatible = "maxim,max8973";
+		reg = <0x1b>;
+
+		regulator-min-microvolt = <935000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+};
+
+&cpu0 {
+	cpu0-supply = <&vdd_dvfs>;
+	operating-points = <
+		/* kHz  uV */
+		1950000 1115000
+		1462500  995000
+	>;
+	voltage-tolerance = <1>; /* 1% */
+};

arch/arm/boot/dts/r8a73a4.dtsi

@@ -85,4 +85,130 @@
 		interrupt-parent = <&gic>;
 		interrupts = <0 69 4>;
 	};
+
+	i2c0: i2c@e6500000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,rmobile-iic";
+		reg = <0 0xe6500000 0 0x428>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 174 0x4>;
+	};
+
+	i2c1: i2c@e6510000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,rmobile-iic";
+		reg = <0 0xe6510000 0 0x428>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 175 0x4>;
+	};
+
+	i2c2: i2c@e6520000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,rmobile-iic";
+		reg = <0 0xe6520000 0 0x428>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 176 0x4>;
+	};
+
+	i2c3: i2c@e6530000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,rmobile-iic";
+		reg = <0 0xe6530000 0 0x428>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 177 0x4>;
+	};
+
+	i2c4: i2c@e6540000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,rmobile-iic";
+		reg = <0 0xe6540000 0 0x428>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 178 0x4>;
+	};
+
+	i2c5: i2c@e60b0000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,rmobile-iic";
+		reg = <0 0xe60b0000 0 0x428>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 179 0x4>;
+	};
+
+	i2c6: i2c@e6550000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,rmobile-iic";
+		reg = <0 0xe6550000 0 0x428>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 184 0x4>;
+	};
+
+	i2c7: i2c@e6560000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,rmobile-iic";
+		reg = <0 0xe6560000 0 0x428>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 185 0x4>;
+	};
+
+	i2c8: i2c@e6570000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,rmobile-iic";
+		reg = <0 0xe6570000 0 0x428>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 173 0x4>;
+	};
+
+	mmcif0: mmcif@ee200000 {
+		compatible = "renesas,sh-mmcif";
+		reg = <0 0xee200000 0 0x80>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 169 0x4>;
+		reg-io-width = <4>;
+		status = "disabled";
+	};
+
+	mmcif1: mmcif@ee220000 {
+		compatible = "renesas,sh-mmcif";
+		reg = <0 0xee220000 0 0x80>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 170 0x4>;
+		reg-io-width = <4>;
+		status = "disabled";
+	};
+
+	sdhi0: sdhi@ee100000 {
+		compatible = "renesas,r8a73a4-sdhi";
+		reg = <0 0xee100000 0 0x100>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 165 4>;
+		cap-sd-highspeed;
+		status = "disabled";
+	};
+
+	sdhi1: sdhi@ee120000 {
+		compatible = "renesas,r8a73a4-sdhi";
+		reg = <0 0xee120000 0 0x100>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 166 4>;
+		cap-sd-highspeed;
+		status = "disabled";
+	};
+
+	sdhi2: sdhi@ee140000 {
+		compatible = "renesas,r8a73a4-sdhi";
+		reg = <0 0xee140000 0 0x100>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 167 4>;
+		cap-sd-highspeed;
+		status = "disabled";
+	};
 };

arch/arm/boot/dts/r8a7790.dtsi

@@ -54,4 +54,58 @@
 		interrupt-parent = <&gic>;
 		interrupts = <0 0 4>, <0 1 4>, <0 2 4>,	<0 3 4>;
 	};
+
+	mmcif0: mmcif@ee200000 {
+		compatible = "renesas,sh-mmcif";
+		reg = <0 0xee200000 0 0x80>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 169 0x4>;
+		reg-io-width = <4>;
+		status = "disabled";
+	};
+
+	mmcif1: mmcif@ee220000 {
+		compatible = "renesas,sh-mmcif";
+		reg = <0 0xee220000 0 0x80>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 170 0x4>;
+		reg-io-width = <4>;
+		status = "disabled";
+	};
+
+	sdhi0: sdhi@ee100000 {
+		compatible = "renesas,r8a7790-sdhi";
+		reg = <0 0xee100000 0 0x100>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 165 4>;
+		cap-sd-highspeed;
+		status = "disabled";
+	};
+
+	sdhi1: sdhi@ee120000 {
+		compatible = "renesas,r8a7790-sdhi";
+		reg = <0 0xee120000 0 0x100>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 166 4>;
+		cap-sd-highspeed;
+		status = "disabled";
+	};
+
+	sdhi2: sdhi@ee140000 {
+		compatible = "renesas,r8a7790-sdhi";
+		reg = <0 0xee140000 0 0x100>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 167 4>;
+		cap-sd-highspeed;
+		status = "disabled";
+	};
+
+	sdhi3: sdhi@ee160000 {
+		compatible = "renesas,r8a7790-sdhi";
+		reg = <0 0xee160000 0 0x100>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 168 4>;
+		cap-sd-highspeed;
+		status = "disabled";
+	};
 };

arch/arm/mach-shmobile/Kconfig

@@ -156,6 +156,18 @@ config MACH_KZM9D
 	select REGULATOR_FIXED_VOLTAGE if REGULATOR
 	select USE_OF
 
+config MACH_KZM9D_REFERENCE
+	bool "KZM9D board - Reference Device Tree Implementation"
+	depends on ARCH_EMEV2
+	select REGULATOR_FIXED_VOLTAGE if REGULATOR
+	select USE_OF
+	---help---
+	   Use reference implementation of KZM9D board support
+	   which makes a greater use of device tree at the expense
+	   of not supporting a number of devices.
+
+	   This is intended to aid developers
+
 config MACH_KZM9G
 	bool "KZM-A9-GT board"
 	depends on ARCH_SH73A0

arch/arm/mach-shmobile/Makefile

@@ -46,6 +46,7 @@ obj-$(CONFIG_MACH_LAGER)	+= board-lager.o
 obj-$(CONFIG_MACH_ARMADILLO800EVA)	+= board-armadillo800eva.o
 obj-$(CONFIG_MACH_ARMADILLO800EVA_REFERENCE)	+= board-armadillo800eva-reference.o
 obj-$(CONFIG_MACH_KZM9D)	+= board-kzm9d.o
+obj-$(CONFIG_MACH_KZM9D_REFERENCE)	+= board-kzm9d-reference.o
 obj-$(CONFIG_MACH_KZM9G)	+= board-kzm9g.o
 obj-$(CONFIG_MACH_KZM9G_REFERENCE)	+= board-kzm9g-reference.o
 

arch/arm/mach-shmobile/Makefile.boot

@@ -7,6 +7,7 @@ loadaddr-$(CONFIG_MACH_ARMADILLO800EVA_REFERENCE) += 0x40008000
 loadaddr-$(CONFIG_MACH_BOCKW) += 0x60008000
 loadaddr-$(CONFIG_MACH_KOTA2) += 0x41008000
 loadaddr-$(CONFIG_MACH_KZM9D) += 0x40008000
+loadaddr-$(CONFIG_MACH_KZM9D_REFERENCE) += 0x40008000
 loadaddr-$(CONFIG_MACH_KZM9G) += 0x41008000
 loadaddr-$(CONFIG_MACH_KZM9G_REFERENCE) += 0x41008000
 loadaddr-$(CONFIG_MACH_LAGER) += 0x40008000

arch/arm/mach-shmobile/board-ape6evm.c

@@ -20,7 +20,6 @@
 
 #include <linux/gpio.h>
 #include <linux/interrupt.h>
-#include <linux/irqchip.h>
 #include <linux/kernel.h>
 #include <linux/pinctrl/machine.h>
 #include <linux/platform_device.h>
@@ -102,7 +101,6 @@ static const char *ape6evm_boards_compat_dt[] __initdata = {
 };
 
 DT_MACHINE_START(APE6EVM_DT, "ape6evm")
-	.init_irq	= irqchip_init,
 	.init_time	= shmobile_timer_init,
 	.init_machine	= ape6evm_add_standard_devices,
 	.dt_compat	= ape6evm_boards_compat_dt,

arch/arm/mach-shmobile/board-armadillo800eva.c

@@ -679,15 +679,6 @@ static struct platform_device vcc_sdhi1 = {
 };
 
 /* SDHI0 */
-/*
- * FIXME
- *
- * It use polling mode here, since
- * CD (= Card Detect) pin is not connected to SDHI0_CD.
- * We can use IRQ31 as card detect irq,
- * but it needs chattering removal operation
- */
-#define IRQ31	irq_pin(31)
 static struct sh_mobile_sdhi_info sdhi0_info = {
 	.dma_slave_tx	= SHDMA_SLAVE_SDHI0_TX,
 	.dma_slave_rx	= SHDMA_SLAVE_SDHI0_RX,

arch/arm/mach-shmobile/board-kzm9d-reference.c

@@ -0,0 +1,46 @@
+/*
+ * kzm9d board support - Reference DT implementation
+ *
+ * Copyright (C) 2013  Renesas Solutions Corp.
+ * Copyright (C) 2013  Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/init.h>
+#include <linux/of_platform.h>
+#include <mach/emev2.h>
+#include <mach/common.h>
+#include <asm/mach/arch.h>
+
+static void __init kzm9d_add_standard_devices(void)
+{
+	emev2_clock_init();
+
+	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+}
+
+static const char *kzm9d_boards_compat_dt[] __initdata = {
+	"renesas,kzm9d-reference",
+	NULL,
+};
+
+DT_MACHINE_START(KZM9D_DT, "kzm9d")
+	.smp		= smp_ops(emev2_smp_ops),
+	.map_io		= emev2_map_io,
+	.init_early	= emev2_init_delay,
+	.init_machine	= kzm9d_add_standard_devices,
+	.init_late	= shmobile_init_late,
+	.dt_compat	= kzm9d_boards_compat_dt,
+MACHINE_END

arch/arm/mach-shmobile/board-kzm9d.c

@@ -85,9 +85,7 @@ static const char *kzm9d_boards_compat_dt[] __initdata = {
 DT_MACHINE_START(KZM9D_DT, "kzm9d")
 	.smp		= smp_ops(emev2_smp_ops),
 	.map_io		= emev2_map_io,
-	.init_early	= emev2_add_early_devices,
+	.init_early	= emev2_init_delay,
-	.nr_irqs	= NR_IRQS_LEGACY,
-	.init_irq	= emev2_init_irq,
 	.init_machine	= kzm9d_add_standard_devices,
 	.init_late	= shmobile_init_late,
 	.dt_compat	= kzm9d_boards_compat_dt,

arch/arm/mach-shmobile/board-kzm9g-reference.c

@@ -24,7 +24,6 @@
 #include <linux/gpio.h>
 #include <linux/io.h>
 #include <linux/irq.h>
-#include <linux/irqchip.h>
 #include <linux/input.h>
 #include <linux/of_platform.h>
 #include <linux/pinctrl/machine.h>
@@ -99,7 +98,6 @@ DT_MACHINE_START(KZM9G_DT, "kzm9g-reference")
 	.map_io		= sh73a0_map_io,
 	.init_early	= sh73a0_init_delay,
 	.nr_irqs	= NR_IRQS_LEGACY,
-	.init_irq	= irqchip_init,
 	.init_machine	= kzm_init,
 	.init_time	= shmobile_timer_init,
 	.dt_compat	= kzm9g_boards_compat_dt,

arch/arm/mach-shmobile/board-lager.c

@@ -22,7 +22,6 @@
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
 #include <linux/interrupt.h>
-#include <linux/irqchip.h>
 #include <linux/kernel.h>
 #include <linux/leds.h>
 #include <linux/pinctrl/machine.h>
@@ -103,7 +102,6 @@ static const char *lager_boards_compat_dt[] __initdata = {
 };
 
 DT_MACHINE_START(LAGER_DT, "lager")
-	.init_irq	= irqchip_init,
 	.init_time	= r8a7790_timer_init,
 	.init_machine	= lager_add_standard_devices,
 	.dt_compat	= lager_boards_compat_dt,

arch/arm/mach-shmobile/clock-emev2.c

@@ -221,7 +221,7 @@ void __init emev2_clock_init(void)
 	smu_base = ioremap(EMEV2_SMU_BASE, PAGE_SIZE);
 	BUG_ON(!smu_base);
 
-	/* setup STI timer to run on 37.768 kHz and deassert reset */
+	/* setup STI timer to run on 32.768 kHz and deassert reset */
 	emev2_smu_write(0, STI_CLKSEL);
 	emev2_smu_write(1, STI_RSTCTRL);
 

arch/arm/mach-shmobile/include/mach/dma.h

@@ -1 +0,0 @@
-/* empty */

arch/arm/mach-shmobile/include/mach/emev2.h

@@ -2,8 +2,7 @@
 #define __ASM_EMEV2_H__
 
 extern void emev2_map_io(void);
-extern void emev2_init_irq(void);
+extern void emev2_init_delay(void);
-extern void emev2_add_early_devices(void);
 extern void emev2_add_standard_devices(void);
 extern void emev2_clock_init(void);
 extern void emev2_set_boot_vector(unsigned long value);

arch/arm/mach-shmobile/include/mach/r8a7778.h

@@ -33,7 +33,6 @@ extern void r8a7778_add_mmc_device(struct sh_mmcif_plat_data *info);
 
 extern void r8a7778_init_late(void);
 extern void r8a7778_init_delay(void);
-extern void r8a7778_init_irq(void);
 extern void r8a7778_init_irq_dt(void);
 extern void r8a7778_clock_init(void);
 extern void r8a7778_init_irq_extpin(int irlm);

arch/arm/mach-shmobile/setup-emev2.c

@@ -20,7 +20,6 @@
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
-#include <linux/irqchip.h>
 #include <linux/platform_device.h>
 #include <linux/platform_data/gpio-em.h>
 #include <linux/of_platform.h>
@@ -39,13 +38,6 @@
 
 static struct map_desc emev2_io_desc[] __initdata = {
 #ifdef CONFIG_SMP
-	/* 128K entity map for 0xe0100000 (SMU) */
-	{
-		.virtual	= 0xe0100000,
-		.pfn		= __phys_to_pfn(0xe0100000),
-		.length		= SZ_128K,
-		.type		= MT_DEVICE
-	},
 	/* 2M mapping for SCU + L2 controller */
 	{
 		.virtual	= 0xf0000000,
@@ -63,102 +55,40 @@ void __init emev2_map_io(void)
 
 /* UART */
 static struct resource uart0_resources[] = {
-	[0]	= {
+	DEFINE_RES_MEM(0xe1020000, 0x38),
-		.start	= 0xe1020000,
+	DEFINE_RES_IRQ(40),
-		.end	= 0xe1020037,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1]	= {
-		.start	= 40,
-		.flags	= IORESOURCE_IRQ,
-	}
-};
-
-static struct platform_device uart0_device = {
-	.name		= "serial8250-em",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(uart0_resources),
-	.resource	= uart0_resources,
 };
 
 static struct resource uart1_resources[] = {
-	[0]	= {
+	DEFINE_RES_MEM(0xe1030000, 0x38),
-		.start	= 0xe1030000,
+	DEFINE_RES_IRQ(41),
-		.end	= 0xe1030037,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1]	= {
-		.start	= 41,
-		.flags	= IORESOURCE_IRQ,
-	}
-};
-
-static struct platform_device uart1_device = {
-	.name		= "serial8250-em",
-	.id		= 1,
-	.num_resources	= ARRAY_SIZE(uart1_resources),
-	.resource	= uart1_resources,
 };
 
 static struct resource uart2_resources[] = {
-	[0]	= {
+	DEFINE_RES_MEM(0xe1040000, 0x38),
-		.start	= 0xe1040000,
+	DEFINE_RES_IRQ(42),
-		.end	= 0xe1040037,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1]	= {
-		.start	= 42,
-		.flags	= IORESOURCE_IRQ,
-	}
-};
-
-static struct platform_device uart2_device = {
-	.name		= "serial8250-em",
-	.id		= 2,
-	.num_resources	= ARRAY_SIZE(uart2_resources),
-	.resource	= uart2_resources,
 };
 
 static struct resource uart3_resources[] = {
-	[0]	= {
+	DEFINE_RES_MEM(0xe1050000, 0x38),
-		.start	= 0xe1050000,
+	DEFINE_RES_IRQ(43),
-		.end	= 0xe1050037,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1]	= {
-		.start	= 43,
-		.flags	= IORESOURCE_IRQ,
-	}
 };
 
-static struct platform_device uart3_device = {
+#define emev2_register_uart(idx)					\
-	.name		= "serial8250-em",
+	platform_device_register_simple("serial8250-em", idx,		\
-	.id		= 3,
+					uart##idx##_resources,		\
-	.num_resources	= ARRAY_SIZE(uart3_resources),
+					ARRAY_SIZE(uart##idx##_resources))
-	.resource	= uart3_resources,
-};
 
 /* STI */
 static struct resource sti_resources[] = {
-	[0] = {
+	DEFINE_RES_MEM(0xe0180000, 0x54),
-		.name	= "STI",
+	DEFINE_RES_IRQ(157),
-		.start	= 0xe0180000,
-		.end	= 0xe0180053,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= 157,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device sti_device = {
-	.name		= "em_sti",
-	.id		= 0,
-	.resource	= sti_resources,
-	.num_resources	= ARRAY_SIZE(sti_resources),
 };
 
+#define emev2_register_sti()					\
+	platform_device_register_simple("em_sti", 0,		\
+					sti_resources,		\
+					ARRAY_SIZE(sti_resources))
 
 /* GIO */
 static struct gpio_em_config gio0_config = {
@@ -168,36 +98,10 @@ static struct gpio_em_config gio0_config = {
 };
 
 static struct resource gio0_resources[] = {
-	[0] = {
+	DEFINE_RES_MEM(0xe0050000, 0x2c),
-		.name	= "GIO_000",
+	DEFINE_RES_MEM(0xe0050040, 0x20),
-		.start	= 0xe0050000,
+	DEFINE_RES_IRQ(99),
-		.end	= 0xe005002b,
+	DEFINE_RES_IRQ(100),
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.name	= "GIO_000",
-		.start	= 0xe0050040,
-		.end	= 0xe005005f,
-		.flags	= IORESOURCE_MEM,
-	},
-	[2] = {
-		.start	= 99,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[3] = {
-		.start	= 100,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device gio0_device = {
-	.name		= "em_gio",
-	.id		= 0,
-	.resource	= gio0_resources,
-	.num_resources	= ARRAY_SIZE(gio0_resources),
-	.dev		= {
-		.platform_data	= &gio0_config,
-	},
 };
 
 static struct gpio_em_config gio1_config = {
@@ -207,36 +111,10 @@ static struct gpio_em_config gio1_config = {
 };
 
 static struct resource gio1_resources[] = {
-	[0] = {
+	DEFINE_RES_MEM(0xe0050080, 0x2c),
-		.name	= "GIO_032",
+	DEFINE_RES_MEM(0xe00500c0, 0x20),
-		.start	= 0xe0050080,
+	DEFINE_RES_IRQ(101),
-		.end	= 0xe00500ab,
+	DEFINE_RES_IRQ(102),
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.name	= "GIO_032",
-		.start	= 0xe00500c0,
-		.end	= 0xe00500df,
-		.flags	= IORESOURCE_MEM,
-	},
-	[2] = {
-		.start	= 101,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[3] = {
-		.start	= 102,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device gio1_device = {
-	.name		= "em_gio",
-	.id		= 1,
-	.resource	= gio1_resources,
-	.num_resources	= ARRAY_SIZE(gio1_resources),
-	.dev		= {
-		.platform_data	= &gio1_config,
-	},
 };
 
 static struct gpio_em_config gio2_config = {
@@ -246,36 +124,10 @@ static struct gpio_em_config gio2_config = {
 };
 
 static struct resource gio2_resources[] = {
-	[0] = {
+	DEFINE_RES_MEM(0xe0050100, 0x2c),
-		.name	= "GIO_064",
+	DEFINE_RES_MEM(0xe0050140, 0x20),
-		.start	= 0xe0050100,
+	DEFINE_RES_IRQ(103),
-		.end	= 0xe005012b,
+	DEFINE_RES_IRQ(104),
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.name	= "GIO_064",
-		.start	= 0xe0050140,
-		.end	= 0xe005015f,
-		.flags	= IORESOURCE_MEM,
-	},
-	[2] = {
-		.start	= 103,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[3] = {
-		.start	= 104,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device gio2_device = {
-	.name		= "em_gio",
-	.id		= 2,
-	.resource	= gio2_resources,
-	.num_resources	= ARRAY_SIZE(gio2_resources),
-	.dev		= {
-		.platform_data	= &gio2_config,
-	},
 };
 
 static struct gpio_em_config gio3_config = {
@@ -285,36 +137,10 @@ static struct gpio_em_config gio3_config = {
 };
 
 static struct resource gio3_resources[] = {
-	[0] = {
+	DEFINE_RES_MEM(0xe0050180, 0x2c),
-		.name	= "GIO_096",
+	DEFINE_RES_MEM(0xe00501c0, 0x20),
-		.start	= 0xe0050180,
+	DEFINE_RES_IRQ(105),
-		.end	= 0xe00501ab,
+	DEFINE_RES_IRQ(106),
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.name	= "GIO_096",
-		.start	= 0xe00501c0,
-		.end	= 0xe00501df,
-		.flags	= IORESOURCE_MEM,
-	},
-	[2] = {
-		.start	= 105,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[3] = {
-		.start	= 106,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device gio3_device = {
-	.name		= "em_gio",
-	.id		= 3,
-	.resource	= gio3_resources,
-	.num_resources	= ARRAY_SIZE(gio3_resources),
-	.dev		= {
-		.platform_data	= &gio3_config,
-	},
 };
 
 static struct gpio_em_config gio4_config = {
@@ -324,126 +150,52 @@ static struct gpio_em_config gio4_config = {
 };
 
 static struct resource gio4_resources[] = {
-	[0] = {
+	DEFINE_RES_MEM(0xe0050200, 0x2c),
-		.name	= "GIO_128",
+	DEFINE_RES_MEM(0xe0050240, 0x20),
-		.start	= 0xe0050200,
+	DEFINE_RES_IRQ(107),
-		.end	= 0xe005022b,
+	DEFINE_RES_IRQ(108),
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.name	= "GIO_128",
-		.start	= 0xe0050240,
-		.end	= 0xe005025f,
-		.flags	= IORESOURCE_MEM,
-	},
-	[2] = {
-		.start	= 107,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[3] = {
-		.start	= 108,
-		.flags	= IORESOURCE_IRQ,
-	},
 };
 
-static struct platform_device gio4_device = {
+#define emev2_register_gio(idx)						\
-	.name		= "em_gio",
+	platform_device_register_resndata(&platform_bus, "em_gio",	\
-	.id		= 4,
+					  idx, gio##idx##_resources,	\
-	.resource	= gio4_resources,
+					  ARRAY_SIZE(gio##idx##_resources), \
-	.num_resources	= ARRAY_SIZE(gio4_resources),
+					  &gio##idx##_config,		\
-	.dev		= {
+					  sizeof(struct gpio_em_config))
-		.platform_data	= &gio4_config,
-	},
-};
 
 static struct resource pmu_resources[] = {
-	[0] = {
+	DEFINE_RES_IRQ(152),
-		.start	= 152,
+	DEFINE_RES_IRQ(153),
-		.end	= 152,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[1] = {
-		.start	= 153,
-		.end	= 153,
-		.flags	= IORESOURCE_IRQ,
-	},
 };
 
-static struct platform_device pmu_device = {
+#define emev2_register_pmu()					\
-	.name		= "arm-pmu",
+	platform_device_register_simple("arm-pmu", -1,		\
-	.id		= -1,
+					pmu_resources,		\
-	.num_resources	= ARRAY_SIZE(pmu_resources),
+					ARRAY_SIZE(pmu_resources))
-	.resource	= pmu_resources,
-};
-
-static struct platform_device *emev2_early_devices[] __initdata = {
-	&uart0_device,
-	&uart1_device,
-	&uart2_device,
-	&uart3_device,
-};
-
-static struct platform_device *emev2_late_devices[] __initdata = {
-	&sti_device,
-	&gio0_device,
-	&gio1_device,
-	&gio2_device,
-	&gio3_device,
-	&gio4_device,
-	&pmu_device,
-};
 
 void __init emev2_add_standard_devices(void)
 {
 	emev2_clock_init();
 
-	platform_add_devices(emev2_early_devices,
+	emev2_register_uart(0);
-			     ARRAY_SIZE(emev2_early_devices));
+	emev2_register_uart(1);
-
+	emev2_register_uart(2);
-	platform_add_devices(emev2_late_devices,
+	emev2_register_uart(3);
-			     ARRAY_SIZE(emev2_late_devices));
+	emev2_register_sti();
+	emev2_register_gio(0);
+	emev2_register_gio(1);
+	emev2_register_gio(2);
+	emev2_register_gio(3);
+	emev2_register_gio(4);
+	emev2_register_pmu();
 }
 
-static void __init emev2_init_delay(void)
+void __init emev2_init_delay(void)
 {
 	shmobile_setup_delay(533, 1, 3); /* Cortex-A9 @ 533MHz */
 }
 
-void __init emev2_add_early_devices(void)
-{
-	emev2_init_delay();
-
-	early_platform_add_devices(emev2_early_devices,
-				   ARRAY_SIZE(emev2_early_devices));
-
-	/* setup early console here as well */
-	shmobile_setup_console();
-}
-
-void __init emev2_init_irq(void)
-{
-	void __iomem *gic_dist_base;
-	void __iomem *gic_cpu_base;
-
-	/* Static mappings, never released */
-	gic_dist_base = ioremap(0xe0028000, PAGE_SIZE);
-	gic_cpu_base = ioremap(0xe0020000, PAGE_SIZE);
-	BUG_ON(!gic_dist_base || !gic_cpu_base);
-
-	/* Use GIC to handle interrupts */
-	gic_init(0, 29, gic_dist_base, gic_cpu_base);
-}
-
 #ifdef CONFIG_USE_OF
-static const struct of_dev_auxdata emev2_auxdata_lookup[] __initconst = {
-	{ }
-};
-
-static void __init emev2_add_standard_devices_dt(void)
-{
-	of_platform_populate(NULL, of_default_bus_match_table,
-			     emev2_auxdata_lookup, NULL);
-}
 
 static const char *emev2_boards_compat_dt[] __initdata = {
 	"renesas,emev2",
@@ -452,10 +204,8 @@ static const char *emev2_boards_compat_dt[] __initdata = {
 
 DT_MACHINE_START(EMEV2_DT, "Generic Emma Mobile EV2 (Flattened Device Tree)")
 	.smp		= smp_ops(emev2_smp_ops),
+	.map_io		= emev2_map_io,
 	.init_early	= emev2_init_delay,
-	.nr_irqs	= NR_IRQS_LEGACY,
-	.init_irq	= irqchip_init,
-	.init_machine	= emev2_add_standard_devices_dt,
 	.dt_compat	= emev2_boards_compat_dt,
 MACHINE_END
 

arch/arm/mach-shmobile/setup-r8a73a4.c

@@ -18,7 +18,6 @@
  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 #include <linux/irq.h>
-#include <linux/irqchip.h>
 #include <linux/kernel.h>
 #include <linux/of_platform.h>
 #include <linux/platform_data/irq-renesas-irqc.h>
@@ -194,7 +193,6 @@ static const char *r8a73a4_boards_compat_dt[] __initdata = {
 };
 
 DT_MACHINE_START(R8A73A4_DT, "Generic R8A73A4 (Flattened Device Tree)")
-	.init_irq	= irqchip_init,
 	.init_machine	= r8a73a4_add_standard_devices_dt,
 	.init_time	= shmobile_timer_init,
 	.dt_compat	= r8a73a4_boards_compat_dt,

arch/arm/mach-shmobile/setup-r8a7740.c

@@ -986,16 +986,22 @@ void __init r8a7740_add_early_devices(void)
 
 #ifdef CONFIG_USE_OF
 
-static const struct of_dev_auxdata r8a7740_auxdata_lookup[] __initconst = {
+void __init r8a7740_add_early_devices_dt(void)
-	{ }
+{
-};
+	shmobile_setup_delay(800, 1, 3); /* Cortex-A9 @ 800MHz */
+
+	early_platform_add_devices(r8a7740_early_devices,
+				   ARRAY_SIZE(r8a7740_early_devices));
+
+	/* setup early console here as well */
+	shmobile_setup_console();
+}
 
 void __init r8a7740_add_standard_devices_dt(void)
 {
 	platform_add_devices(r8a7740_devices_dt,
 			    ARRAY_SIZE(r8a7740_devices_dt));
-	of_platform_populate(NULL, of_default_bus_match_table,
+	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-			     r8a7740_auxdata_lookup, NULL);
 }
 
 void __init r8a7740_init_delay(void)

arch/arm/mach-shmobile/setup-r8a7778.c

@@ -53,7 +53,7 @@
 	.irqs		= SCIx_IRQ_MUXED(irq),			\
 }
 
-static struct plat_sci_port scif_platform_data[] = {
+static struct plat_sci_port scif_platform_data[] __initdata = {
 	SCIF_INFO(0xffe40000, gic_iid(0x66)),
 	SCIF_INFO(0xffe41000, gic_iid(0x67)),
 	SCIF_INFO(0xffe42000, gic_iid(0x68)),
@@ -63,24 +63,24 @@ static struct plat_sci_port scif_platform_data[] = {
 };
 
 /* TMU */
-static struct resource sh_tmu0_resources[] = {
+static struct resource sh_tmu0_resources[] __initdata = {
 	DEFINE_RES_MEM(0xffd80008, 12),
 	DEFINE_RES_IRQ(gic_iid(0x40)),
 };
 
-static struct sh_timer_config sh_tmu0_platform_data = {
+static struct sh_timer_config sh_tmu0_platform_data __initdata = {
 	.name			= "TMU00",
 	.channel_offset		= 0x4,
 	.timer_bit		= 0,
 	.clockevent_rating	= 200,
 };
 
-static struct resource sh_tmu1_resources[] = {
+static struct resource sh_tmu1_resources[] __initdata = {
 	DEFINE_RES_MEM(0xffd80014, 12),
 	DEFINE_RES_IRQ(gic_iid(0x41)),
 };
 
-static struct sh_timer_config sh_tmu1_platform_data = {
+static struct sh_timer_config sh_tmu1_platform_data __initdata = {
 	.name			= "TMU01",
 	.channel_offset		= 0x10,
 	.timer_bit		= 1,
@@ -189,7 +189,7 @@ USB_PLATFORM_INFO(ehci);
 USB_PLATFORM_INFO(ohci);
 
 /* Ether */
-static struct resource ether_resources[] = {
+static struct resource ether_resources[] __initdata = {
 	DEFINE_RES_MEM(0xfde00000, 0x400),
 	DEFINE_RES_IRQ(gic_iid(0x89)),
 };
@@ -203,17 +203,17 @@ void __init r8a7778_add_ether_device(struct sh_eth_plat_data *pdata)
 }
 
 /* PFC/GPIO */
-static struct resource pfc_resources[] = {
+static struct resource pfc_resources[] __initdata = {
 	DEFINE_RES_MEM(0xfffc0000, 0x118),
 };
 
 #define R8A7778_GPIO(idx)						\
-static struct resource r8a7778_gpio##idx##_resources[] = {		\
+static struct resource r8a7778_gpio##idx##_resources[] __initdata = {	\
 	DEFINE_RES_MEM(0xffc40000 + 0x1000 * (idx), 0x30),		\
 	DEFINE_RES_IRQ(gic_iid(0x87)),					\
 };									\
 									\
-static struct gpio_rcar_config r8a7778_gpio##idx##_platform_data = {	\
+static struct gpio_rcar_config r8a7778_gpio##idx##_platform_data __initdata = { \
 	.gpio_base	= 32 * (idx),					\
 	.irq_base	= GPIO_IRQ_BASE(idx),				\
 	.number_of_pins	= 32,						\
@@ -249,7 +249,7 @@ void __init r8a7778_pinmux_init(void)
 };
 
 /* SDHI */
-static struct resource sdhi_resources[] = {
+static struct resource sdhi_resources[] __initdata = {
 	/* SDHI0 */
 	DEFINE_RES_MEM(0xFFE4C000, 0x100),
 	DEFINE_RES_IRQ(gic_iid(0x77)),
@@ -365,12 +365,12 @@ void __init r8a7778_init_late(void)
 	platform_device_register_full(&ohci_info);
 }
 
-static struct renesas_intc_irqpin_config irqpin_platform_data = {
+static struct renesas_intc_irqpin_config irqpin_platform_data __initdata = {
 	.irq_base = irq_pin(0), /* IRQ0 -> IRQ3 */
 	.sense_bitfield_width = 2,
 };
 
-static struct resource irqpin_resources[] = {
+static struct resource irqpin_resources[] __initdata = {
 	DEFINE_RES_MEM(0xfe78001c, 4), /* ICR1 */
 	DEFINE_RES_MEM(0xfe780010, 4), /* INTPRI */
 	DEFINE_RES_MEM(0xfe780024, 4), /* INTREQ */
@@ -408,17 +408,25 @@ void __init r8a7778_init_irq_extpin(int irlm)
 			&irqpin_platform_data, sizeof(irqpin_platform_data));
 }
 
+void __init r8a7778_init_delay(void)
+{
+	shmobile_setup_delay(800, 1, 3); /* Cortex-A9 @ 800MHz */
+}
+
+#ifdef CONFIG_USE_OF
 #define INT2SMSKCR0	0x82288 /* 0xfe782288 */
 #define INT2SMSKCR1	0x8228c /* 0xfe78228c */
 
 #define INT2NTSR0	0x00018 /* 0xfe700018 */
 #define INT2NTSR1	0x0002c /* 0xfe70002c */
-static void __init r8a7778_init_irq_common(void)
+void __init r8a7778_init_irq_dt(void)
 {
 	void __iomem *base = ioremap_nocache(0xfe700000, 0x00100000);
 
 	BUG_ON(!base);
 
+	irqchip_init();
+
 	/* route all interrupts to ARM */
 	__raw_writel(0x73ffffff, base + INT2NTSR0);
 	__raw_writel(0xffffffff, base + INT2NTSR1);
@@ -430,43 +438,6 @@ static void __init r8a7778_init_irq_common(void)
 	iounmap(base);
 }
 
-void __init r8a7778_init_irq(void)
-{
-	void __iomem *gic_dist_base;
-	void __iomem *gic_cpu_base;
-
-	gic_dist_base = ioremap_nocache(0xfe438000, PAGE_SIZE);
-	gic_cpu_base  = ioremap_nocache(0xfe430000, PAGE_SIZE);
-	BUG_ON(!gic_dist_base || !gic_cpu_base);
-
-	/* use GIC to handle interrupts */
-	gic_init(0, 29, gic_dist_base, gic_cpu_base);
-
-	r8a7778_init_irq_common();
-}
-
-void __init r8a7778_init_delay(void)
-{
-	shmobile_setup_delay(800, 1, 3); /* Cortex-A9 @ 800MHz */
-}
-
-#ifdef CONFIG_USE_OF
-void __init r8a7778_init_irq_dt(void)
-{
-	irqchip_init();
-	r8a7778_init_irq_common();
-}
-
-static const struct of_dev_auxdata r8a7778_auxdata_lookup[] __initconst = {
-	{},
-};
-
-void __init r8a7778_add_standard_devices_dt(void)
-{
-	of_platform_populate(NULL, of_default_bus_match_table,
-			     r8a7778_auxdata_lookup, NULL);
-}
-
 static const char *r8a7778_compat_dt[] __initdata = {
 	"renesas,r8a7778",
 	NULL,
@@ -475,7 +446,6 @@ static const char *r8a7778_compat_dt[] __initdata = {
 DT_MACHINE_START(R8A7778_DT, "Generic R8A7778 (Flattened Device Tree)")
 	.init_early	= r8a7778_init_delay,
 	.init_irq	= r8a7778_init_irq_dt,
-	.init_machine	= r8a7778_add_standard_devices_dt,
 	.init_time	= shmobile_timer_init,
 	.dt_compat	= r8a7778_compat_dt,
 	.init_late      = r8a7778_init_late,

arch/arm/mach-shmobile/setup-r8a7779.c

@@ -665,10 +665,6 @@ void __init r8a7779_init_delay(void)
 	shmobile_setup_delay(1000, 2, 4); /* Cortex-A9 @ 1000MHz */
 }
 
-static const struct of_dev_auxdata r8a7779_auxdata_lookup[] __initconst = {
-	{},
-};
-
 void __init r8a7779_add_standard_devices_dt(void)
 {
 	/* clocks are setup late during boot in the case of DT */
@@ -676,8 +672,7 @@ void __init r8a7779_add_standard_devices_dt(void)
 
 	platform_add_devices(r8a7779_devices_dt,
 			     ARRAY_SIZE(r8a7779_devices_dt));
-	of_platform_populate(NULL, of_default_bus_match_table,
+	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-			     r8a7779_auxdata_lookup, NULL);
 }
 
 static const char *r8a7779_compat_dt[] __initdata = {

arch/arm/mach-shmobile/setup-r8a7790.c

@@ -19,7 +19,6 @@
  */
 
 #include <linux/irq.h>
-#include <linux/irqchip.h>
 #include <linux/kernel.h>
 #include <linux/of_platform.h>
 #include <linux/serial_sci.h>
@@ -177,10 +176,6 @@ void __init r8a7790_timer_init(void)
 }
 
 #ifdef CONFIG_USE_OF
-void __init r8a7790_add_standard_devices_dt(void)
-{
-	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-}
 
 static const char *r8a7790_boards_compat_dt[] __initdata = {
 	"renesas,r8a7790",
@@ -188,8 +183,6 @@ static const char *r8a7790_boards_compat_dt[] __initdata = {
 };
 
 DT_MACHINE_START(R8A7790_DT, "Generic R8A7790 (Flattened Device Tree)")
-	.init_irq	= irqchip_init,
-	.init_machine	= r8a7790_add_standard_devices_dt,
 	.init_time	= r8a7790_timer_init,
 	.dt_compat	= r8a7790_boards_compat_dt,
 MACHINE_END

arch/arm/mach-shmobile/setup-sh7372.c

@@ -1147,10 +1147,6 @@ void __init sh7372_add_early_devices_dt(void)
 	shmobile_setup_console();
 }
 
-static const struct of_dev_auxdata sh7372_auxdata_lookup[] __initconst = {
-	{ }
-};
-
 void __init sh7372_add_standard_devices_dt(void)
 {
 	/* clocks are setup late during boot in the case of DT */
@@ -1159,8 +1155,7 @@ void __init sh7372_add_standard_devices_dt(void)
 	platform_add_devices(sh7372_early_devices,
 			    ARRAY_SIZE(sh7372_early_devices));
 
-	of_platform_populate(NULL, of_default_bus_match_table,
+	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-			     sh7372_auxdata_lookup, NULL);
 }
 
 static const char *sh7372_boards_compat_dt[] __initdata = {

arch/arm/mach-shmobile/setup-sh73a0.c

@@ -22,7 +22,6 @@
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
-#include <linux/irqchip.h>
 #include <linux/platform_device.h>
 #include <linux/of_platform.h>
 #include <linux/delay.h>
@@ -61,29 +60,16 @@ void __init sh73a0_map_io(void)
 	iotable_init(sh73a0_io_desc, ARRAY_SIZE(sh73a0_io_desc));
 }
 
-static struct resource sh73a0_pfc_resources[] = {
+/* PFC */
-	[0] = {
+static struct resource pfc_resources[] __initdata = {
-		.start	= 0xe6050000,
+	DEFINE_RES_MEM(0xe6050000, 0x8000),
-		.end	= 0xe6057fff,
+	DEFINE_RES_MEM(0xe605801c, 0x000c),
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= 0xe605801c,
-		.end	= 0xe6058027,
-		.flags	= IORESOURCE_MEM,
-	}
-};
-
-static struct platform_device sh73a0_pfc_device = {
-	.name		= "pfc-sh73a0",
-	.id		= -1,
-	.resource	= sh73a0_pfc_resources,
-	.num_resources	= ARRAY_SIZE(sh73a0_pfc_resources),
 };
 
 void __init sh73a0_pinmux_init(void)
 {
-	platform_device_register(&sh73a0_pfc_device);
+	platform_device_register_simple("pfc-sh73a0", -1, pfc_resources,
+					ARRAY_SIZE(pfc_resources));
 }
 
 static struct plat_sci_port scif0_platform_data = {
@@ -958,10 +944,6 @@ void __init sh73a0_add_early_devices(void)
 
 #ifdef CONFIG_USE_OF
 
-static const struct of_dev_auxdata sh73a0_auxdata_lookup[] __initconst = {
-	{},
-};
-
 void __init sh73a0_add_standard_devices_dt(void)
 {
 	struct platform_device_info devinfo = { .name = "cpufreq-cpu0", .id = -1, };
@@ -971,8 +953,7 @@ void __init sh73a0_add_standard_devices_dt(void)
 
 	platform_add_devices(sh73a0_devices_dt,
 			     ARRAY_SIZE(sh73a0_devices_dt));
-	of_platform_populate(NULL, of_default_bus_match_table,
+	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-			     sh73a0_auxdata_lookup, NULL);
 
 	/* Instantiate cpufreq-cpu0 */
 	platform_device_register_full(&devinfo);
@@ -988,7 +969,6 @@ DT_MACHINE_START(SH73A0_DT, "Generic SH73A0 (Flattened Device Tree)")
 	.map_io		= sh73a0_map_io,
 	.init_early	= sh73a0_init_delay,
 	.nr_irqs	= NR_IRQS_LEGACY,
-	.init_irq	= irqchip_init,
 	.init_machine	= sh73a0_add_standard_devices_dt,
 	.dt_compat	= sh73a0_boards_compat_dt,
 MACHINE_END

arch/arm/mach-shmobile/smp-emev2.c

@@ -38,9 +38,12 @@ static int __cpuinit emev2_boot_secondary(unsigned int cpu, struct task_struct *
 
 static void __init emev2_smp_prepare_cpus(unsigned int max_cpus)
 {
+	/* setup EMEV2 specific SCU base, enable */
+	shmobile_scu_base = ioremap(EMEV2_SCU_BASE, PAGE_SIZE);
 	scu_enable(shmobile_scu_base);
 
 	/* Tell ROM loader about our vector (in headsmp-scu.S, headsmp.S) */
+	emev2_clock_init(); /* need ioremapped SMU */
 	emev2_set_boot_vector(__pa(shmobile_boot_vector));
 	shmobile_boot_fn = virt_to_phys(shmobile_boot_scu);
 	shmobile_boot_arg = (unsigned long)shmobile_scu_base;
@@ -49,21 +52,7 @@ static void __init emev2_smp_prepare_cpus(unsigned int max_cpus)
 	scu_power_mode(shmobile_scu_base, SCU_PM_NORMAL);
 }
 
-static void __init emev2_smp_init_cpus(void)
-{
-	unsigned int ncores;
-
-	/* setup EMEV2 specific SCU base */
-	shmobile_scu_base = ioremap(EMEV2_SCU_BASE, PAGE_SIZE);
-	emev2_clock_init(); /* need ioremapped SMU */
-
-	ncores = shmobile_scu_base ? scu_get_core_count(shmobile_scu_base) : 1;
-
-	shmobile_smp_init_cpus(ncores);
-}
-
 struct smp_operations emev2_smp_ops __initdata = {
-	.smp_init_cpus		= emev2_smp_init_cpus,
 	.smp_prepare_cpus	= emev2_smp_prepare_cpus,
 	.smp_boot_secondary	= emev2_boot_secondary,
 };