AT91: Fix AT91SAM9G20 reset as per the errata in the data sheet

If the SDRAM is not cleanly shutdown before reset it can be left driving
the bus, which then stops the bootloader booting from NAND.

Signed-off-by: Peter Horton <phorton@bitbox.co.uk>
[nicolas.ferre@atmel.com: change file header line order]
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
This commit is contained in:
Peter Horton 2010-05-28 16:37:26 +01:00 committed by Nicolas Ferre
parent abf0c1bc94
commit 184c82e853
3 changed files with 63 additions and 2 deletions

View File

@ -16,7 +16,7 @@ obj-$(CONFIG_ARCH_AT91SAM9261) += at91sam9261.o at91sam926x_time.o at91sam9261_d
obj-$(CONFIG_ARCH_AT91SAM9G10) += at91sam9261.o at91sam926x_time.o at91sam9261_devices.o sam9_smc.o
obj-$(CONFIG_ARCH_AT91SAM9263) += at91sam9263.o at91sam926x_time.o at91sam9263_devices.o sam9_smc.o
obj-$(CONFIG_ARCH_AT91SAM9RL) += at91sam9rl.o at91sam926x_time.o at91sam9rl_devices.o sam9_smc.o
obj-$(CONFIG_ARCH_AT91SAM9G20) += at91sam9260.o at91sam926x_time.o at91sam9260_devices.o sam9_smc.o
obj-$(CONFIG_ARCH_AT91SAM9G20) += at91sam9260.o at91sam926x_time.o at91sam9260_devices.o sam9_smc.o at91sam9g20_reset.o
obj-$(CONFIG_ARCH_AT91SAM9G45) += at91sam9g45.o at91sam926x_time.o at91sam9g45_devices.o sam9_smc.o
obj-$(CONFIG_ARCH_AT91CAP9) += at91cap9.o at91sam926x_time.o at91cap9_devices.o sam9_smc.o
obj-$(CONFIG_ARCH_AT572D940HF) += at572d940hf.o at91sam926x_time.o at572d940hf_devices.o sam9_smc.o

View File

@ -25,6 +25,8 @@
#include "generic.h"
#include "clock.h"
extern void at91sam9g20_reset(void);
static struct map_desc at91sam9260_io_desc[] __initdata = {
{
.virtual = AT91_VA_BASE_SYS,
@ -327,7 +329,11 @@ void __init at91sam9260_initialize(unsigned long main_clock)
else
iotable_init(at91sam9260_sram_desc, ARRAY_SIZE(at91sam9260_sram_desc));
at91_arch_reset = at91sam9260_reset;
if (cpu_is_at91sam9g20())
at91_arch_reset = at91sam9g20_reset;
else
at91_arch_reset = at91sam9260_reset;
pm_power_off = at91sam9260_poweroff;
at91_extern_irq = (1 << AT91SAM9260_ID_IRQ0) | (1 << AT91SAM9260_ID_IRQ1)
| (1 << AT91SAM9260_ID_IRQ2);

View File

@ -0,0 +1,55 @@
/*
* reset AT91SAM9G20 as per errata
*
* (C) BitBox Ltd 2010
*
* unless the SDRAM is cleanly shutdown before we hit the
* reset register it can be left driving the data bus and
* killing the chance of a subsequent boot from NAND
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#define CP15_CR_I (1 << 12)
#define SYS_VIRT_OFS (-0x01000000)
#define SDRAMC_BASE (SYS_VIRT_OFS + 0xffffea00)
#define SDRAMC_TR 0x0004
#define SDRAMC_LPR 0x0010
#define SDRAMC_LPCB_POWER_DOWN 2
#define RSTC_BASE (SYS_VIRT_OFS + 0xfffffd00)
#define RSTC_CR 0x0000
#define RSTC_PROCRST (1 << 0)
#define RSTC_PERRST (1 << 2)
#define RSTC_KEY (0xa5 << 24)
.arm
.globl at91sam9g20_reset
at91sam9g20_reset: mov r0, #0
mcr p15, 0, r0, c7, c5, 0 @ flush I-cache
mrc p15, 0, r0, c1, c0, 0
orr r0, r0, #CP15_CR_I
mcr p15, 0, r0, c1, c0, 0 @ enable I-cache
ldr r0, =SDRAMC_BASE @ preload constants
ldr r1, =RSTC_BASE
mov r2, #1
mov r3, #SDRAMC_LPCB_POWER_DOWN
ldr r4, =RSTC_KEY | RSTC_PERRST | RSTC_PROCRST
.balign 32 @ align to cache line
str r2, [r0, #SDRAMC_TR] @ disable SDRAM access
str r3, [r0, #SDRAMC_LPR] @ power down SDRAM
str r4, [r1, #RSTC_CR] @ reset processor
b .