diff --git a/CREDITS b/CREDITS index 077b147388bd..c62dcb3b7e26 100644 --- a/CREDITS +++ b/CREDITS @@ -317,6 +317,14 @@ S: 2322 37th Ave SW S: Seattle, Washington 98126-2010 S: USA +N: Muli Ben-Yehuda +E: mulix@mulix.org +E: muli@il.ibm.com +W: http://www.mulix.org +D: trident OSS sound driver, x86-64 dma-ops and Calgary IOMMU, +D: KVM and Xen bits and other misc. hackery. +S: Haifa, Israel + N: Johannes Berg E: johannes@sipsolutions.net W: http://johannes.sipsolutions.net/ diff --git a/Documentation/00-INDEX b/Documentation/00-INDEX index 1977fab38656..6de71308a906 100644 --- a/Documentation/00-INDEX +++ b/Documentation/00-INDEX @@ -361,8 +361,6 @@ telephony/ - directory with info on telephony (e.g. voice over IP) support. time_interpolators.txt - info on time interpolators. -tipar.txt - - information about Parallel link cable for Texas Instruments handhelds. tty.txt - guide to the locking policies of the tty layer. uml/ diff --git a/Documentation/ABI/testing/sysfs-devices-memory b/Documentation/ABI/testing/sysfs-devices-memory new file mode 100644 index 000000000000..7a16fe1e2270 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-devices-memory @@ -0,0 +1,24 @@ +What: /sys/devices/system/memory +Date: June 2008 +Contact: Badari Pulavarty +Description: + The /sys/devices/system/memory contains a snapshot of the + internal state of the kernel memory blocks. Files could be + added or removed dynamically to represent hot-add/remove + operations. + +Users: hotplug memory add/remove tools + https://w3.opensource.ibm.com/projects/powerpc-utils/ + +What: /sys/devices/system/memory/memoryX/removable +Date: June 2008 +Contact: Badari Pulavarty +Description: + The file /sys/devices/system/memory/memoryX/removable + indicates whether this memory block is removable or not. + This is useful for a user-level agent to determine + identify removable sections of the memory before attempting + potentially expensive hot-remove memory operation + +Users: hotplug memory remove tools + https://w3.opensource.ibm.com/projects/powerpc-utils/ diff --git a/Documentation/ABI/testing/sysfs-kernel-mm b/Documentation/ABI/testing/sysfs-kernel-mm new file mode 100644 index 000000000000..190d523ac159 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-kernel-mm @@ -0,0 +1,6 @@ +What: /sys/kernel/mm +Date: July 2008 +Contact: Nishanth Aravamudan , VM maintainers +Description: + /sys/kernel/mm/ should contain any and all VM + related information in /sys/kernel/. diff --git a/Documentation/ABI/testing/sysfs-kernel-mm-hugepages b/Documentation/ABI/testing/sysfs-kernel-mm-hugepages new file mode 100644 index 000000000000..e21c00571cf4 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-kernel-mm-hugepages @@ -0,0 +1,15 @@ +What: /sys/kernel/mm/hugepages/ +Date: June 2008 +Contact: Nishanth Aravamudan , hugetlb maintainers +Description: + /sys/kernel/mm/hugepages/ contains a number of subdirectories + of the form hugepages-kB, where is the page size + of the hugepages supported by the kernel/CPU combination. + + Under these directories are a number of files: + nr_hugepages + nr_overcommit_hugepages + free_hugepages + surplus_hugepages + resv_hugepages + See Documentation/vm/hugetlbpage.txt for details. diff --git a/Documentation/CodingStyle b/Documentation/CodingStyle index 6caa14615578..1875e502f872 100644 --- a/Documentation/CodingStyle +++ b/Documentation/CodingStyle @@ -474,25 +474,29 @@ make a good program). So, you can either get rid of GNU emacs, or change it to use saner values. To do the latter, you can stick the following in your .emacs file: -(defun linux-c-mode () - "C mode with adjusted defaults for use with the Linux kernel." - (interactive) - (c-mode) - (c-set-style "K&R") - (setq tab-width 8) - (setq indent-tabs-mode t) - (setq c-basic-offset 8)) +(defun c-lineup-arglist-tabs-only (ignored) + "Line up argument lists by tabs, not spaces" + (let* ((anchor (c-langelem-pos c-syntactic-element)) + (column (c-langelem-2nd-pos c-syntactic-element)) + (offset (- (1+ column) anchor)) + (steps (floor offset c-basic-offset))) + (* (max steps 1) + c-basic-offset))) -This will define the M-x linux-c-mode command. When hacking on a -module, if you put the string -*- linux-c -*- somewhere on the first -two lines, this mode will be automatically invoked. Also, you may want -to add +(add-hook 'c-mode-hook + (lambda () + (let ((filename (buffer-file-name))) + ;; Enable kernel mode for the appropriate files + (when (and filename + (string-match "~/src/linux-trees" filename)) + (setq indent-tabs-mode t) + (c-set-style "linux") + (c-set-offset 'arglist-cont-nonempty + '(c-lineup-gcc-asm-reg + c-lineup-arglist-tabs-only)))))) -(setq auto-mode-alist (cons '("/usr/src/linux.*/.*\\.[ch]$" . linux-c-mode) - auto-mode-alist)) - -to your .emacs file if you want to have linux-c-mode switched on -automagically when you edit source files under /usr/src/linux. +This will make emacs go better with the kernel coding style for C +files below ~/src/linux-trees. But even if you fail in getting emacs to do sane formatting, not everything is lost: use "indent". diff --git a/Documentation/DMA-API.txt b/Documentation/DMA-API.txt index 80d150458c80..d8b63d164e41 100644 --- a/Documentation/DMA-API.txt +++ b/Documentation/DMA-API.txt @@ -298,10 +298,10 @@ recommended that you never use these unless you really know what the cache width is. int -dma_mapping_error(dma_addr_t dma_addr) +dma_mapping_error(struct device *dev, dma_addr_t dma_addr) int -pci_dma_mapping_error(dma_addr_t dma_addr) +pci_dma_mapping_error(struct pci_dev *hwdev, dma_addr_t dma_addr) In some circumstances dma_map_single and dma_map_page will fail to create a mapping. A driver can check for these errors by testing the returned diff --git a/Documentation/DocBook/kernel-locking.tmpl b/Documentation/DocBook/kernel-locking.tmpl index 2510763295d0..084f6ad7b7a0 100644 --- a/Documentation/DocBook/kernel-locking.tmpl +++ b/Documentation/DocBook/kernel-locking.tmpl @@ -219,10 +219,10 @@ - Three Main Types of Kernel Locks: Spinlocks, Mutexes and Semaphores + Two Main Types of Kernel Locks: Spinlocks and Mutexes - There are three main types of kernel locks. The fundamental type + There are two main types of kernel locks. The fundamental type is the spinlock (include/asm/spinlock.h), which is a very simple single-holder lock: if you can't get the @@ -239,14 +239,6 @@ can't sleep (see ), and so have to use a spinlock instead. - - The third type is a semaphore - (include/linux/semaphore.h): it - can have more than one holder at any time (the number decided at - initialization time), although it is most commonly used as a - single-holder lock (a mutex). If you can't get a semaphore, your - task will be suspended and later on woken up - just like for mutexes. - Neither type of lock is recursive: see . @@ -278,7 +270,7 @@ - Semaphores still exist, because they are required for + Mutexes still exist, because they are required for synchronization between user contexts, as we will see below. @@ -289,18 +281,17 @@ If you have a data structure which is only ever accessed from - user context, then you can use a simple semaphore - (linux/linux/semaphore.h) to protect it. This - is the most trivial case: you initialize the semaphore to the number - of resources available (usually 1), and call - down_interruptible() to grab the semaphore, and - up() to release it. There is also a - down(), which should be avoided, because it + user context, then you can use a simple mutex + (include/linux/mutex.h) to protect it. This + is the most trivial case: you initialize the mutex. Then you can + call mutex_lock_interruptible() to grab the mutex, + and mutex_unlock() to release it. There is also a + mutex_lock(), which should be avoided, because it will not return if a signal is received. - Example: linux/net/core/netfilter.c allows + Example: net/netfilter/nf_sockopt.c allows registration of new setsockopt() and getsockopt() calls, with nf_register_sockopt(). Registration and @@ -515,7 +506,7 @@ If you are in a process context (any syscall) and want to - lock other process out, use a semaphore. You can take a semaphore + lock other process out, use a mutex. You can take a mutex and sleep (copy_from_user*( or kmalloc(x,GFP_KERNEL)). @@ -662,7 +653,7 @@ SLBH SLBH SLBH -DI +MLI None @@ -692,8 +683,8 @@ spin_lock_bh -DI -down_interruptible +MLI +mutex_lock_interruptible @@ -1310,7 +1301,7 @@ as Alan Cox says, Lock data, not code. There is a coding bug where a piece of code tries to grab a spinlock twice: it will spin forever, waiting for the lock to - be released (spinlocks, rwlocks and semaphores are not + be released (spinlocks, rwlocks and mutexes are not recursive in Linux). This is trivial to diagnose: not a stay-up-five-nights-talk-to-fluffy-code-bunnies kind of problem. @@ -1335,7 +1326,7 @@ as Alan Cox says, Lock data, not code. This complete lockup is easy to diagnose: on SMP boxes the - watchdog timer or compiling with DEBUG_SPINLOCKS set + watchdog timer or compiling with DEBUG_SPINLOCK set (include/linux/spinlock.h) will show this up immediately when it happens. @@ -1558,7 +1549,7 @@ the amount of locking which needs to be done. Read/Write Lock Variants - Both spinlocks and semaphores have read/write variants: + Both spinlocks and mutexes have read/write variants: rwlock_t and struct rw_semaphore. These divide users into two classes: the readers and the writers. If you are only reading the data, you can get a read lock, but to write to @@ -1681,7 +1672,7 @@ the amount of locking which needs to be done. #include <linux/slab.h> #include <linux/string.h> +#include <linux/rcupdate.h> - #include <linux/semaphore.h> + #include <linux/mutex.h> #include <asm/errno.h> struct object @@ -1913,7 +1904,7 @@ machines due to caching. - put_user() + put_user() @@ -1927,13 +1918,13 @@ machines due to caching. - down_interruptible() and - down() + mutex_lock_interruptible() and + mutex_lock() - There is a down_trylock() which can be + There is a mutex_trylock() which can be used inside interrupt context, as it will not sleep. - up() will also never sleep. + mutex_unlock() will also never sleep. @@ -2023,7 +2014,7 @@ machines due to caching. Prior to 2.5, or when CONFIG_PREEMPT is unset, processes in user context inside the kernel would not - preempt each other (ie. you had that CPU until you have it up, + preempt each other (ie. you had that CPU until you gave it up, except for interrupts). With the addition of CONFIG_PREEMPT in 2.5.4, this changed: when in user context, higher priority tasks can "cut in": spinlocks diff --git a/Documentation/DocBook/procfs-guide.tmpl b/Documentation/DocBook/procfs-guide.tmpl index 1fd6a1ec7591..8a5dc6e021ff 100644 --- a/Documentation/DocBook/procfs-guide.tmpl +++ b/Documentation/DocBook/procfs-guide.tmpl @@ -29,12 +29,12 @@ - 1.0  + 1.0 May 30, 2001 Initial revision posted to linux-kernel - 1.1  + 1.1 June 3, 2001 Revised after comments from linux-kernel diff --git a/Documentation/Intel-IOMMU.txt b/Documentation/Intel-IOMMU.txt index c2321903aa09..21bc416d887e 100644 --- a/Documentation/Intel-IOMMU.txt +++ b/Documentation/Intel-IOMMU.txt @@ -48,7 +48,7 @@ IOVA generation is pretty generic. We used the same technique as vmalloc() but these are not global address spaces, but separate for each domain. Different DMA engines may support different number of domains. -We also allocate gaurd pages with each mapping, so we can attempt to catch +We also allocate guard pages with each mapping, so we can attempt to catch any overflow that might happen. @@ -112,4 +112,4 @@ TBD - For compatibility testing, could use unity map domain for all devices, just provide a 1-1 for all useful memory under a single domain for all devices. -- API for paravirt ops for abstracting functionlity for VMM folks. +- API for paravirt ops for abstracting functionality for VMM folks. diff --git a/Documentation/accounting/delay-accounting.txt b/Documentation/accounting/delay-accounting.txt index 1443cd71d263..8a12f0730c94 100644 --- a/Documentation/accounting/delay-accounting.txt +++ b/Documentation/accounting/delay-accounting.txt @@ -11,6 +11,7 @@ the delays experienced by a task while a) waiting for a CPU (while being runnable) b) completion of synchronous block I/O initiated by the task c) swapping in pages +d) memory reclaim and makes these statistics available to userspace through the taskstats interface. @@ -41,7 +42,7 @@ this structure. See include/linux/taskstats.h for a description of the fields pertaining to delay accounting. It will generally be in the form of counters returning the cumulative -delay seen for cpu, sync block I/O, swapin etc. +delay seen for cpu, sync block I/O, swapin, memory reclaim etc. Taking the difference of two successive readings of a given counter (say cpu_delay_total) for a task will give the delay @@ -94,7 +95,9 @@ CPU count real total virtual total delay total 7876 92005750 100000000 24001500 IO count delay total 0 0 -MEM count delay total +SWAP count delay total + 0 0 +RECLAIM count delay total 0 0 Get delays seen in executing a given simple command @@ -108,5 +111,7 @@ CPU count real total virtual total delay total 6 4000250 4000000 0 IO count delay total 0 0 -MEM count delay total +SWAP count delay total + 0 0 +RECLAIM count delay total 0 0 diff --git a/Documentation/accounting/getdelays.c b/Documentation/accounting/getdelays.c index 40121b5cca14..3f7755f3963f 100644 --- a/Documentation/accounting/getdelays.c +++ b/Documentation/accounting/getdelays.c @@ -196,14 +196,18 @@ void print_delayacct(struct taskstats *t) " %15llu%15llu%15llu%15llu\n" "IO %15s%15s\n" " %15llu%15llu\n" - "MEM %15s%15s\n" + "SWAP %15s%15s\n" + " %15llu%15llu\n" + "RECLAIM %12s%15s\n" " %15llu%15llu\n", "count", "real total", "virtual total", "delay total", t->cpu_count, t->cpu_run_real_total, t->cpu_run_virtual_total, t->cpu_delay_total, "count", "delay total", t->blkio_count, t->blkio_delay_total, - "count", "delay total", t->swapin_count, t->swapin_delay_total); + "count", "delay total", t->swapin_count, t->swapin_delay_total, + "count", "delay total", + t->freepages_count, t->freepages_delay_total); } void task_context_switch_counts(struct taskstats *t) diff --git a/Documentation/accounting/taskstats-struct.txt b/Documentation/accounting/taskstats-struct.txt index cd784f46bf8a..e7512c061c15 100644 --- a/Documentation/accounting/taskstats-struct.txt +++ b/Documentation/accounting/taskstats-struct.txt @@ -6,7 +6,7 @@ This document contains an explanation of the struct taskstats fields. There are three different groups of fields in the struct taskstats: 1) Common and basic accounting fields - If CONFIG_TASKSTATS is set, the taskstats inteface is enabled and + If CONFIG_TASKSTATS is set, the taskstats interface is enabled and the common fields and basic accounting fields are collected for delivery at do_exit() of a task. 2) Delay accounting fields @@ -26,6 +26,8 @@ There are three different groups of fields in the struct taskstats: 5) Time accounting for SMT machines +6) Extended delay accounting fields for memory reclaim + Future extension should add fields to the end of the taskstats struct, and should not change the relative position of each field within the struct. @@ -170,4 +172,9 @@ struct taskstats { __u64 ac_utimescaled; /* utime scaled on frequency etc */ __u64 ac_stimescaled; /* stime scaled on frequency etc */ __u64 cpu_scaled_run_real_total; /* scaled cpu_run_real_total */ + +6) Extended delay accounting fields for memory reclaim + /* Delay waiting for memory reclaim */ + __u64 freepages_count; + __u64 freepages_delay_total; } diff --git a/Documentation/bt8xxgpio.txt b/Documentation/bt8xxgpio.txt new file mode 100644 index 000000000000..d8297e4ebd26 --- /dev/null +++ b/Documentation/bt8xxgpio.txt @@ -0,0 +1,67 @@ +=============================================================== +== BT8XXGPIO driver == +== == +== A driver for a selfmade cheap BT8xx based PCI GPIO-card == +== == +== For advanced documentation, see == +== http://www.bu3sch.de/btgpio.php == +=============================================================== + + +A generic digital 24-port PCI GPIO card can be built out of an ordinary +Brooktree bt848, bt849, bt878 or bt879 based analog TV tuner card. The +Brooktree chip is used in old analog Hauppauge WinTV PCI cards. You can easily +find them used for low prices on the net. + +The bt8xx chip does have 24 digital GPIO ports. +These ports are accessible via 24 pins on the SMD chip package. + + +============================================== +== How to physically access the GPIO pins == +============================================== + +The are several ways to access these pins. One might unsolder the whole chip +and put it on a custom PCI board, or one might only unsolder each individual +GPIO pin and solder that to some tiny wire. As the chip package really is tiny +there are some advanced soldering skills needed in any case. + +The physical pinouts are drawn in the following ASCII art. +The GPIO pins are marked with G00-G23 + + G G G G G G G G G G G G G G G G G G + 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 + 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 + | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | + --------------------------------------------------------------------------- + --| ^ ^ |-- + --| pin 86 pin 67 |-- + --| |-- + --| pin 61 > |-- G18 + --| |-- G19 + --| |-- G20 + --| |-- G21 + --| |-- G22 + --| pin 56 > |-- G23 + --| |-- + --| Brooktree 878/879 |-- + --| |-- + --| |-- + --| |-- + --| |-- + --| |-- + --| |-- + --| |-- + --| |-- + --| |-- + --| |-- + --| |-- + --| |-- + --| |-- + --| O |-- + --| |-- + --------------------------------------------------------------------------- + | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | + ^ + This is pin 1 + diff --git a/Documentation/controllers/memory.txt b/Documentation/controllers/memory.txt index 866b9cd9a959..9b53d5827361 100644 --- a/Documentation/controllers/memory.txt +++ b/Documentation/controllers/memory.txt @@ -242,8 +242,7 @@ rmdir() if there are no tasks. 1. Add support for accounting huge pages (as a separate controller) 2. Make per-cgroup scanner reclaim not-shared pages first 3. Teach controller to account for shared-pages -4. Start reclamation when the limit is lowered -5. Start reclamation in the background when the limit is +4. Start reclamation in the background when the limit is not yet hit but the usage is getting closer Summary diff --git a/Documentation/cpu-freq/governors.txt b/Documentation/cpu-freq/governors.txt index dcec0564d040..5b0cfa67aff9 100644 --- a/Documentation/cpu-freq/governors.txt +++ b/Documentation/cpu-freq/governors.txt @@ -122,7 +122,7 @@ around '10000' or more. show_sampling_rate_(min|max): the minimum and maximum sampling rates available that you may set 'sampling_rate' to. -up_threshold: defines what the average CPU usaged between the samplings +up_threshold: defines what the average CPU usage between the samplings of 'sampling_rate' needs to be for the kernel to make a decision on whether it should increase the frequency. For example when it is set to its default value of '80' it means that between the checking diff --git a/Documentation/edac.txt b/Documentation/edac.txt index a5c36842ecef..8eda3fb66416 100644 --- a/Documentation/edac.txt +++ b/Documentation/edac.txt @@ -222,74 +222,9 @@ both csrow2 and csrow3 are populated, this indicates a dual ranked set of DIMMs for channels 0 and 1. -Within each of the 'mc','mcX' and 'csrowX' directories are several +Within each of the 'mcX' and 'csrowX' directories are several EDAC control and attribute files. - -============================================================================ -DIRECTORY 'mc' - -In directory 'mc' are EDAC system overall control and attribute files: - - -Panic on UE control file: - - 'edac_mc_panic_on_ue' - - An uncorrectable error will cause a machine panic. This is usually - desirable. It is a bad idea to continue when an uncorrectable error - occurs - it is indeterminate what was uncorrected and the operating - system context might be so mangled that continuing will lead to further - corruption. If the kernel has MCE configured, then EDAC will never - notice the UE. - - LOAD TIME: module/kernel parameter: panic_on_ue=[0|1] - - RUN TIME: echo "1" >/sys/devices/system/edac/mc/edac_mc_panic_on_ue - - -Log UE control file: - - 'edac_mc_log_ue' - - Generate kernel messages describing uncorrectable errors. These errors - are reported through the system message log system. UE statistics - will be accumulated even when UE logging is disabled. - - LOAD TIME: module/kernel parameter: log_ue=[0|1] - - RUN TIME: echo "1" >/sys/devices/system/edac/mc/edac_mc_log_ue - - -Log CE control file: - - 'edac_mc_log_ce' - - Generate kernel messages describing correctable errors. These - errors are reported through the system message log system. - CE statistics will be accumulated even when CE logging is disabled. - - LOAD TIME: module/kernel parameter: log_ce=[0|1] - - RUN TIME: echo "1" >/sys/devices/system/edac/mc/edac_mc_log_ce - - -Polling period control file: - - 'edac_mc_poll_msec' - - The time period, in milliseconds, for polling for error information. - Too small a value wastes resources. Too large a value might delay - necessary handling of errors and might loose valuable information for - locating the error. 1000 milliseconds (once each second) is the current - default. Systems which require all the bandwidth they can get, may - increase this. - - LOAD TIME: module/kernel parameter: poll_msec=[0|1] - - RUN TIME: echo "1000" >/sys/devices/system/edac/mc/edac_mc_poll_msec - - ============================================================================ 'mcX' DIRECTORIES @@ -392,7 +327,7 @@ Sdram memory scrubbing rate: 'sdram_scrub_rate' Read/Write attribute file that controls memory scrubbing. The scrubbing - rate is set by writing a minimum bandwith in bytes/sec to the attribute + rate is set by writing a minimum bandwidth in bytes/sec to the attribute file. The rate will be translated to an internal value that gives at least the specified rate. @@ -537,7 +472,6 @@ Channel 1 DIMM Label control file: motherboard specific and determination of this information must occur in userland at this time. - ============================================================================ SYSTEM LOGGING @@ -570,7 +504,6 @@ error type, a notice of "no info" and then an optional, driver-specific error message. - ============================================================================ PCI Bus Parity Detection @@ -604,6 +537,74 @@ Enable/Disable PCI Parity checking control file: echo "0" >/sys/devices/system/edac/pci/check_pci_parity +Parity Count: + + 'pci_parity_count' + + This attribute file will display the number of parity errors that + have been detected. + + +============================================================================ +MODULE PARAMETERS + +Panic on UE control file: + + 'edac_mc_panic_on_ue' + + An uncorrectable error will cause a machine panic. This is usually + desirable. It is a bad idea to continue when an uncorrectable error + occurs - it is indeterminate what was uncorrected and the operating + system context might be so mangled that continuing will lead to further + corruption. If the kernel has MCE configured, then EDAC will never + notice the UE. + + LOAD TIME: module/kernel parameter: edac_mc_panic_on_ue=[0|1] + + RUN TIME: echo "1" > /sys/module/edac_core/parameters/edac_mc_panic_on_ue + + +Log UE control file: + + 'edac_mc_log_ue' + + Generate kernel messages describing uncorrectable errors. These errors + are reported through the system message log system. UE statistics + will be accumulated even when UE logging is disabled. + + LOAD TIME: module/kernel parameter: edac_mc_log_ue=[0|1] + + RUN TIME: echo "1" > /sys/module/edac_core/parameters/edac_mc_log_ue + + +Log CE control file: + + 'edac_mc_log_ce' + + Generate kernel messages describing correctable errors. These + errors are reported through the system message log system. + CE statistics will be accumulated even when CE logging is disabled. + + LOAD TIME: module/kernel parameter: edac_mc_log_ce=[0|1] + + RUN TIME: echo "1" > /sys/module/edac_core/parameters/edac_mc_log_ce + + +Polling period control file: + + 'edac_mc_poll_msec' + + The time period, in milliseconds, for polling for error information. + Too small a value wastes resources. Too large a value might delay + necessary handling of errors and might loose valuable information for + locating the error. 1000 milliseconds (once each second) is the current + default. Systems which require all the bandwidth they can get, may + increase this. + + LOAD TIME: module/kernel parameter: edac_mc_poll_msec=[0|1] + + RUN TIME: echo "1000" > /sys/module/edac_core/parameters/edac_mc_poll_msec + Panic on PCI PARITY Error: @@ -614,21 +615,13 @@ Panic on PCI PARITY Error: error has been detected. - module/kernel parameter: panic_on_pci_parity=[0|1] + module/kernel parameter: edac_panic_on_pci_pe=[0|1] Enable: - echo "1" >/sys/devices/system/edac/pci/panic_on_pci_parity + echo "1" > /sys/module/edac_core/parameters/edac_panic_on_pci_pe Disable: - echo "0" >/sys/devices/system/edac/pci/panic_on_pci_parity - - -Parity Count: - - 'pci_parity_count' - - This attribute file will display the number of parity errors that - have been detected. + echo "0" > /sys/module/edac_core/parameters/edac_panic_on_pci_pe diff --git a/Documentation/fb/sh7760fb.txt b/Documentation/fb/sh7760fb.txt new file mode 100644 index 000000000000..c87bfe5c630a --- /dev/null +++ b/Documentation/fb/sh7760fb.txt @@ -0,0 +1,131 @@ +SH7760/SH7763 integrated LCDC Framebuffer driver +================================================ + +0. Overwiew +----------- +The SH7760/SH7763 have an integrated LCD Display controller (LCDC) which +supports (in theory) resolutions ranging from 1x1 to 1024x1024, +with color depths ranging from 1 to 16 bits, on STN, DSTN and TFT Panels. + +Caveats: +* Framebuffer memory must be a large chunk allocated at the top + of Area3 (HW requirement). Because of this requirement you should NOT + make the driver a module since at runtime it may become impossible to + get a large enough contiguous chunk of memory. + +* The driver does not support changing resolution while loaded + (displays aren't hotpluggable anyway) + +* Heavy flickering may be observed + a) if you're using 15/16bit color modes at >= 640x480 px resolutions, + b) during PCMCIA (or any other slow bus) activity. + +* Rotation works only 90degress clockwise, and only if horizontal + resolution is <= 320 pixels. + +files: drivers/video/sh7760fb.c + include/asm-sh/sh7760fb.h + Documentation/fb/sh7760fb.txt + +1. Platform setup +----------------- +SH7760: + Video data is fetched via the DMABRG DMA engine, so you have to + configure the SH DMAC for DMABRG mode (write 0x94808080 to the + DMARSRA register somewhere at boot). + + PFC registers PCCR and PCDR must be set to peripheral mode. + (write zeros to both). + +The driver does NOT do the above for you since board setup is, well, job +of the board setup code. + +2. Panel definitions +-------------------- +The LCDC must explicitly be told about the type of LCD panel +attached. Data must be wrapped in a "struct sh7760fb_platdata" and +passed to the driver as platform_data. + +Suggest you take a closer look at the SH7760 Manual, Section 30. +(http://documentation.renesas.com/eng/products/mpumcu/e602291_sh7760.pdf) + +The following code illustrates what needs to be done to +get the framebuffer working on a 640x480 TFT: + +====================== cut here ====================================== + +#include +#include + +/* + * NEC NL6440bc26-01 640x480 TFT + * dotclock 25175 kHz + * Xres 640 Yres 480 + * Htotal 800 Vtotal 525 + * HsynStart 656 VsynStart 490 + * HsynLenn 30 VsynLenn 2 + * + * The linux framebuffer layer does not use the syncstart/synclen + * values but right/left/upper/lower margin values. The comments + * for the x_margin explain how to calculate those from given + * panel sync timings. + */ +static struct fb_videomode nl6448bc26 = { + .name = "NL6448BC26", + .refresh = 60, + .xres = 640, + .yres = 480, + .pixclock = 39683, /* in picoseconds! */ + .hsync_len = 30, + .vsync_len = 2, + .left_margin = 114, /* HTOT - (HSYNSLEN + HSYNSTART) */ + .right_margin = 16, /* HSYNSTART - XRES */ + .upper_margin = 33, /* VTOT - (VSYNLEN + VSYNSTART) */ + .lower_margin = 10, /* VSYNSTART - YRES */ + .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, + .vmode = FB_VMODE_NONINTERLACED, + .flag = 0, +}; + +static struct sh7760fb_platdata sh7760fb_nl6448 = { + .def_mode = &nl6448bc26, + .ldmtr = LDMTR_TFT_COLOR_16, /* 16bit TFT panel */ + .lddfr = LDDFR_8BPP, /* we want 8bit output */ + .ldpmmr = 0x0070, + .ldpspr = 0x0500, + .ldaclnr = 0, + .ldickr = LDICKR_CLKSRC(LCDC_CLKSRC_EXTERNAL) | + LDICKR_CLKDIV(1), + .rotate = 0, + .novsync = 1, + .blank = NULL, +}; + +/* SH7760: + * 0xFE300800: 256 * 4byte xRGB palette ram + * 0xFE300C00: 42 bytes ctrl registers + */ +static struct resource sh7760_lcdc_res[] = { + [0] = { + .start = 0xFE300800, + .end = 0xFE300CFF, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 65, + .end = 65, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device sh7760_lcdc_dev = { + .dev = { + .platform_data = &sh7760fb_nl6448, + }, + .name = "sh7760-lcdc", + .id = -1, + .resource = sh7760_lcdc_res, + .num_resources = ARRAY_SIZE(sh7760_lcdc_res), +}; + +====================== cut here ====================================== diff --git a/Documentation/fb/tridentfb.txt b/Documentation/fb/tridentfb.txt index 8a6c8a43e6a3..45d9de5b13a3 100644 --- a/Documentation/fb/tridentfb.txt +++ b/Documentation/fb/tridentfb.txt @@ -3,11 +3,25 @@ Tridentfb is a framebuffer driver for some Trident chip based cards. The following list of chips is thought to be supported although not all are tested: -those from the Image series with Cyber in their names - accelerated -those with Blade in their names (Blade3D,CyberBlade...) - accelerated -the newer CyberBladeXP family - nonaccelerated +those from the TGUI series 9440/96XX and with Cyber in their names +those from the Image series and with Cyber in their names +those with Blade in their names (Blade3D,CyberBlade...) +the newer CyberBladeXP family -Only PCI/AGP based cards are supported, none of the older Tridents. +All families are accelerated. Only PCI/AGP based cards are supported, +none of the older Tridents. +The driver supports 8, 16 and 32 bits per pixel depths. +The TGUI family requires a line length to be power of 2 if acceleration +is enabled. This means that range of possible resolutions and bpp is +limited comparing to the range if acceleration is disabled (see list +of parameters below). + +Known bugs: +1. The driver randomly locks up on 3DImage975 chip with acceleration + enabled. The same happens in X11 (Xorg). +2. The ramdac speeds require some more fine tuning. It is possible to + switch resolution which the chip does not support at some depths for + older chips. How to use it? ============== @@ -17,12 +31,11 @@ video=tridentfb The parameters for tridentfb are concatenated with a ':' as in this example. -video=tridentfb:800x600,bpp=16,noaccel +video=tridentfb:800x600-16@75,noaccel The second level parameters that tridentfb understands are: noaccel - turns off acceleration (when it doesn't work for your card) -accel - force text acceleration (for boards which by default are noacceled) fp - use flat panel related stuff crt - assume monitor is present instead of fp @@ -31,21 +44,24 @@ center - for flat panels and resolutions smaller than native size center the image, otherwise use stretch -memsize - integer value in Kb, use if your card's memory size is misdetected. +memsize - integer value in KB, use if your card's memory size is misdetected. look at the driver output to see what it says when initializing. -memdiff - integer value in Kb,should be nonzero if your card reports - more memory than it actually has.For instance mine is 192K less than + +memdiff - integer value in KB, should be nonzero if your card reports + more memory than it actually has. For instance mine is 192K less than detection says in all three BIOS selectable situations 2M, 4M, 8M. Only use if your video memory is taken from main memory hence of - configurable size.Otherwise use memsize. - If in some modes which barely fit the memory you see garbage at the bottom - this might help by not letting change to that mode anymore. + configurable size. Otherwise use memsize. + If in some modes which barely fit the memory you see garbage + at the bottom this might help by not letting change to that mode + anymore. nativex - the width in pixels of the flat panel.If you know it (usually 1024 800 or 1280) and it is not what the driver seems to detect use it. -bpp - bits per pixel (8,16 or 32) -mode - a mode name like 800x600 (as described in Documentation/fb/modedb.txt) +bpp - bits per pixel (8,16 or 32) +mode - a mode name like 800x600-8@75 as described in + Documentation/fb/modedb.txt Using insane values for the above parameters will probably result in driver misbehaviour so take care(for instance memsize=12345678 or memdiff=23784 or diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt index 9f73587219e8..721c71b86e06 100644 --- a/Documentation/feature-removal-schedule.txt +++ b/Documentation/feature-removal-schedule.txt @@ -138,24 +138,6 @@ Who: Kay Sievers --------------------------- -What: find_task_by_pid -When: 2.6.26 -Why: With pid namespaces, calling this funciton will return the - wrong task when called from inside a namespace. - - The best way to save a task pid and find a task by this - pid later, is to find this task's struct pid pointer (or get - it directly from the task) and call pid_task() later. - - If someone really needs to get a task by its pid_t, then - he most likely needs the find_task_by_vpid() to get the - task from the same namespace as the current task is in, but - this may be not so in general. - -Who: Pavel Emelyanov - ---------------------------- - What: ACPI procfs interface When: July 2008 Why: ACPI sysfs conversion should be finished by January 2008. @@ -300,14 +282,6 @@ Who: ocfs2-devel@oss.oracle.com --------------------------- -What: asm/semaphore.h -When: 2.6.26 -Why: Implementation became generic; users should now include - linux/semaphore.h instead. -Who: Matthew Wilcox - ---------------------------- - What: SCTP_GET_PEER_ADDRS_NUM_OLD, SCTP_GET_PEER_ADDRS_OLD, SCTP_GET_LOCAL_ADDRS_NUM_OLD, SCTP_GET_LOCAL_ADDRS_OLD When: June 2009 diff --git a/Documentation/filesystems/Locking b/Documentation/filesystems/Locking index 8b22d7d8b991..680fb566b928 100644 --- a/Documentation/filesystems/Locking +++ b/Documentation/filesystems/Locking @@ -510,6 +510,7 @@ prototypes: void (*close)(struct vm_area_struct*); int (*fault)(struct vm_area_struct*, struct vm_fault *); int (*page_mkwrite)(struct vm_area_struct *, struct page *); + int (*access)(struct vm_area_struct *, unsigned long, void*, int, int); locking rules: BKL mmap_sem PageLocked(page) @@ -517,6 +518,7 @@ open: no yes close: no yes fault: no yes page_mkwrite: no yes no +access: no yes ->page_mkwrite() is called when a previously read-only page is about to become writeable. The file system is responsible for @@ -525,6 +527,11 @@ taking to lock out truncate, the page range should be verified to be within i_size. The page mapping should also be checked that it is not NULL. + ->access() is called when get_user_pages() fails in +acces_process_vm(), typically used to debug a process through +/proc/pid/mem or ptrace. This function is needed only for +VM_IO | VM_PFNMAP VMAs. + ================================================================================ Dubious stuff diff --git a/Documentation/filesystems/omfs.txt b/Documentation/filesystems/omfs.txt new file mode 100644 index 000000000000..1d0d41ff5c65 --- /dev/null +++ b/Documentation/filesystems/omfs.txt @@ -0,0 +1,106 @@ +Optimized MPEG Filesystem (OMFS) + +Overview +======== + +OMFS is a filesystem created by SonicBlue for use in the ReplayTV DVR +and Rio Karma MP3 player. The filesystem is extent-based, utilizing +block sizes from 2k to 8k, with hash-based directories. This +filesystem driver may be used to read and write disks from these +devices. + +Note, it is not recommended that this FS be used in place of a general +filesystem for your own streaming media device. Native Linux filesystems +will likely perform better. + +More information is available at: + + http://linux-karma.sf.net/ + +Various utilities, including mkomfs and omfsck, are included with +omfsprogs, available at: + + http://bobcopeland.com/karma/ + +Instructions are included in its README. + +Options +======= + +OMFS supports the following mount-time options: + + uid=n - make all files owned by specified user + gid=n - make all files owned by specified group + umask=xxx - set permission umask to xxx + fmask=xxx - set umask to xxx for files + dmask=xxx - set umask to xxx for directories + +Disk format +=========== + +OMFS discriminates between "sysblocks" and normal data blocks. The sysblock +group consists of super block information, file metadata, directory structures, +and extents. Each sysblock has a header containing CRCs of the entire +sysblock, and may be mirrored in successive blocks on the disk. A sysblock may +have a smaller size than a data block, but since they are both addressed by the +same 64-bit block number, any remaining space in the smaller sysblock is +unused. + +Sysblock header information: + +struct omfs_header { + __be64 h_self; /* FS block where this is located */ + __be32 h_body_size; /* size of useful data after header */ + __be16 h_crc; /* crc-ccitt of body_size bytes */ + char h_fill1[2]; + u8 h_version; /* version, always 1 */ + char h_type; /* OMFS_INODE_X */ + u8 h_magic; /* OMFS_IMAGIC */ + u8 h_check_xor; /* XOR of header bytes before this */ + __be32 h_fill2; +}; + +Files and directories are both represented by omfs_inode: + +struct omfs_inode { + struct omfs_header i_head; /* header */ + __be64 i_parent; /* parent containing this inode */ + __be64 i_sibling; /* next inode in hash bucket */ + __be64 i_ctime; /* ctime, in milliseconds */ + char i_fill1[35]; + char i_type; /* OMFS_[DIR,FILE] */ + __be32 i_fill2; + char i_fill3[64]; + char i_name[OMFS_NAMELEN]; /* filename */ + __be64 i_size; /* size of file, in bytes */ +}; + +Directories in OMFS are implemented as a large hash table. Filenames are +hashed then prepended into the bucket list beginning at OMFS_DIR_START. +Lookup requires hashing the filename, then seeking across i_sibling pointers +until a match is found on i_name. Empty buckets are represented by block +pointers with all-1s (~0). + +A file is an omfs_inode structure followed by an extent table beginning at +OMFS_EXTENT_START: + +struct omfs_extent_entry { + __be64 e_cluster; /* start location of a set of blocks */ + __be64 e_blocks; /* number of blocks after e_cluster */ +}; + +struct omfs_extent { + __be64 e_next; /* next extent table location */ + __be32 e_extent_count; /* total # extents in this table */ + __be32 e_fill; + struct omfs_extent_entry e_entry; /* start of extent entries */ +}; + +Each extent holds the block offset followed by number of blocks allocated to +the extent. The final extent in each table is a terminator with e_cluster +being ~0 and e_blocks being ones'-complement of the total number of blocks +in the table. + +If this table overflows, a continuation inode is written and pointed to by +e_next. These have a header but lack the rest of the inode structure. + diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt index 7f268f327d75..64557821ee59 100644 --- a/Documentation/filesystems/proc.txt +++ b/Documentation/filesystems/proc.txt @@ -296,6 +296,7 @@ Table 1-4: Kernel info in /proc uptime System uptime version Kernel version video bttv info of video resources (2.4) + vmallocinfo Show vmalloced areas .............................................................................. You can, for example, check which interrupts are currently in use and what @@ -557,6 +558,49 @@ VmallocTotal: total size of vmalloc memory area VmallocUsed: amount of vmalloc area which is used VmallocChunk: largest contigious block of vmalloc area which is free +.............................................................................. + +vmallocinfo: + +Provides information about vmalloced/vmaped areas. One line per area, +containing the virtual address range of the area, size in bytes, +caller information of the creator, and optional information depending +on the kind of area : + + pages=nr number of pages + phys=addr if a physical address was specified + ioremap I/O mapping (ioremap() and friends) + vmalloc vmalloc() area + vmap vmap()ed pages + user VM_USERMAP area + vpages buffer for pages pointers was vmalloced (huge area) + N=nr (Only on NUMA kernels) + Number of pages allocated on memory node + +> cat /proc/vmallocinfo +0xffffc20000000000-0xffffc20000201000 2101248 alloc_large_system_hash+0x204 ... + /0x2c0 pages=512 vmalloc N0=128 N1=128 N2=128 N3=128 +0xffffc20000201000-0xffffc20000302000 1052672 alloc_large_system_hash+0x204 ... + /0x2c0 pages=256 vmalloc N0=64 N1=64 N2=64 N3=64 +0xffffc20000302000-0xffffc20000304000 8192 acpi_tb_verify_table+0x21/0x4f... + phys=7fee8000 ioremap +0xffffc20000304000-0xffffc20000307000 12288 acpi_tb_verify_table+0x21/0x4f... + phys=7fee7000 ioremap +0xffffc2000031d000-0xffffc2000031f000 8192 init_vdso_vars+0x112/0x210 +0xffffc2000031f000-0xffffc2000032b000 49152 cramfs_uncompress_init+0x2e ... + /0x80 pages=11 vmalloc N0=3 N1=3 N2=2 N3=3 +0xffffc2000033a000-0xffffc2000033d000 12288 sys_swapon+0x640/0xac0 ... + pages=2 vmalloc N1=2 +0xffffc20000347000-0xffffc2000034c000 20480 xt_alloc_table_info+0xfe ... + /0x130 [x_tables] pages=4 vmalloc N0=4 +0xffffffffa0000000-0xffffffffa000f000 61440 sys_init_module+0xc27/0x1d00 ... + pages=14 vmalloc N2=14 +0xffffffffa000f000-0xffffffffa0014000 20480 sys_init_module+0xc27/0x1d00 ... + pages=4 vmalloc N1=4 +0xffffffffa0014000-0xffffffffa0017000 12288 sys_init_module+0xc27/0x1d00 ... + pages=2 vmalloc N1=2 +0xffffffffa0017000-0xffffffffa0022000 45056 sys_init_module+0xc27/0x1d00 ... + pages=10 vmalloc N0=10 1.3 IDE devices in /proc/ide ---------------------------- @@ -887,7 +931,7 @@ group_prealloc max_to_scan mb_groups mb_history min_to_scan order2_req stats stream_req mb_groups: -This file gives the details of mutiblock allocator buddy cache of free blocks +This file gives the details of multiblock allocator buddy cache of free blocks mb_history: Multiblock allocation history. @@ -1430,7 +1474,7 @@ used because pages_free(1355) is smaller than watermark + protection[2] normal page requirement. If requirement is DMA zone(index=0), protection[0] (=0) is used. -zone[i]'s protection[j] is calculated by following exprssion. +zone[i]'s protection[j] is calculated by following expression. (i < j): zone[i]->protection[j] diff --git a/Documentation/filesystems/relay.txt b/Documentation/filesystems/relay.txt index 094f2d2f38b1..510b722667ac 100644 --- a/Documentation/filesystems/relay.txt +++ b/Documentation/filesystems/relay.txt @@ -294,6 +294,16 @@ user-defined data with a channel, and is immediately available (including in create_buf_file()) via chan->private_data or buf->chan->private_data. +Buffer-only channels +-------------------- + +These channels have no files associated and can be created with +relay_open(NULL, NULL, ...). Such channels are useful in scenarios such +as when doing early tracing in the kernel, before the VFS is up. In these +cases, one may open a buffer-only channel and then call +relay_late_setup_files() when the kernel is ready to handle files, +to expose the buffered data to the userspace. + Channel 'modes' --------------- diff --git a/Documentation/filesystems/vfat.txt b/Documentation/filesystems/vfat.txt index 2d5e1e582e13..bbac4f1d9056 100644 --- a/Documentation/filesystems/vfat.txt +++ b/Documentation/filesystems/vfat.txt @@ -96,6 +96,14 @@ shortname=lower|win95|winnt|mixed emulate the Windows 95 rule for create. Default setting is `lower'. +tz=UTC -- Interpret timestamps as UTC rather than local time. + This option disables the conversion of timestamps + between local time (as used by Windows on FAT) and UTC + (which Linux uses internally). This is particuluarly + useful when mounting devices (like digital cameras) + that are set to UTC in order to avoid the pitfalls of + local time. + : 0,1,yes,no,true,false TODO diff --git a/Documentation/filesystems/vfs.txt b/Documentation/filesystems/vfs.txt index b7522c6cbae3..c4d348dabe94 100644 --- a/Documentation/filesystems/vfs.txt +++ b/Documentation/filesystems/vfs.txt @@ -143,7 +143,7 @@ struct file_system_type { The get_sb() method has the following arguments: - struct file_system_type *fs_type: decribes the filesystem, partly initialized + struct file_system_type *fs_type: describes the filesystem, partly initialized by the specific filesystem code int flags: mount flags @@ -895,9 +895,9 @@ struct dentry_operations { iput() yourself d_dname: called when the pathname of a dentry should be generated. - Usefull for some pseudo filesystems (sockfs, pipefs, ...) to delay + Useful for some pseudo filesystems (sockfs, pipefs, ...) to delay pathname generation. (Instead of doing it when dentry is created, - its done only when the path is needed.). Real filesystems probably + it's done only when the path is needed.). Real filesystems probably dont want to use it, because their dentries are present in global dcache hash, so their hash should be an invariant. As no lock is held, d_dname() should not try to modify the dentry itself, unless diff --git a/Documentation/gpio.txt b/Documentation/gpio.txt index c35ca9e40d4c..18022e249c53 100644 --- a/Documentation/gpio.txt +++ b/Documentation/gpio.txt @@ -347,15 +347,12 @@ necessarily be nonportable. Dynamic definition of GPIOs is not currently standard; for example, as a side effect of configuring an add-on board with some GPIO expanders. -These calls are purely for kernel space, but a userspace API could be built -on top of them. - GPIO implementor's framework (OPTIONAL) ======================================= As noted earlier, there is an optional implementation framework making it easier for platforms to support different kinds of GPIO controller using -the same programming interface. +the same programming interface. This framework is called "gpiolib". As a debugging aid, if debugfs is available a /sys/kernel/debug/gpio file will be found there. That will list all the controllers registered through @@ -392,11 +389,21 @@ either NULL or the label associated with that GPIO when it was requested. Platform Support ---------------- -To support this framework, a platform's Kconfig will "select HAVE_GPIO_LIB" +To support this framework, a platform's Kconfig will "select" either +ARCH_REQUIRE_GPIOLIB or ARCH_WANT_OPTIONAL_GPIOLIB and arrange that its includes and defines three functions: gpio_get_value(), gpio_set_value(), and gpio_cansleep(). They may also want to provide a custom value for ARCH_NR_GPIOS. +ARCH_REQUIRE_GPIOLIB means that the gpio-lib code will always get compiled +into the kernel on that architecture. + +ARCH_WANT_OPTIONAL_GPIOLIB means the gpio-lib code defaults to off and the user +can enable it and build it into the kernel optionally. + +If neither of these options are selected, the platform does not support +GPIOs through GPIO-lib and the code cannot be enabled by the user. + Trivial implementations of those functions can directly use framework code, which always dispatches through the gpio_chip: @@ -439,4 +446,120 @@ becomes available. That may mean the device should not be registered until calls for that GPIO can work. One way to address such dependencies is for such gpio_chip controllers to provide setup() and teardown() callbacks to board specific code; those board specific callbacks would register devices -once all the necessary resources are available. +once all the necessary resources are available, and remove them later when +the GPIO controller device becomes unavailable. + + +Sysfs Interface for Userspace (OPTIONAL) +======================================== +Platforms which use the "gpiolib" implementors framework may choose to +configure a sysfs user interface to GPIOs. This is different from the +debugfs interface, since it provides control over GPIO direction and +value instead of just showing a gpio state summary. Plus, it could be +present on production systems without debugging support. + +Given approprate hardware documentation for the system, userspace could +know for example that GPIO #23 controls the write protect line used to +protect boot loader segments in flash memory. System upgrade procedures +may need to temporarily remove that protection, first importing a GPIO, +then changing its output state, then updating the code before re-enabling +the write protection. In normal use, GPIO #23 would never be touched, +and the kernel would have no need to know about it. + +Again depending on appropriate hardware documentation, on some systems +userspace GPIO can be used to determine system configuration data that +standard kernels won't know about. And for some tasks, simple userspace +GPIO drivers could be all that the system really needs. + +Note that standard kernel drivers exist for common "LEDs and Buttons" +GPIO tasks: "leds-gpio" and "gpio_keys", respectively. Use those +instead of talking directly to the GPIOs; they integrate with kernel +frameworks better than your userspace code could. + + +Paths in Sysfs +-------------- +There are three kinds of entry in /sys/class/gpio: + + - Control interfaces used to get userspace control over GPIOs; + + - GPIOs themselves; and + + - GPIO controllers ("gpio_chip" instances). + +That's in addition to standard files including the "device" symlink. + +The control interfaces are write-only: + + /sys/class/gpio/ + + "export" ... Userspace may ask the kernel to export control of + a GPIO to userspace by writing its number to this file. + + Example: "echo 19 > export" will create a "gpio19" node + for GPIO #19, if that's not requested by kernel code. + + "unexport" ... Reverses the effect of exporting to userspace. + + Example: "echo 19 > unexport" will remove a "gpio19" + node exported using the "export" file. + +GPIO signals have paths like /sys/class/gpio/gpio42/ (for GPIO #42) +and have the following read/write attributes: + + /sys/class/gpio/gpioN/ + + "direction" ... reads as either "in" or "out". This value may + normally be written. Writing as "out" defaults to + initializing the value as low. To ensure glitch free + operation, values "low" and "high" may be written to + configure the GPIO as an output with that initial value. + + Note that this attribute *will not exist* if the kernel + doesn't support changing the direction of a GPIO, or + it was exported by kernel code that didn't explicitly + allow userspace to reconfigure this GPIO's direction. + + "value" ... reads as either 0 (low) or 1 (high). If the GPIO + is configured as an output, this value may be written; + any nonzero value is treated as high. + +GPIO controllers have paths like /sys/class/gpio/chipchip42/ (for the +controller implementing GPIOs starting at #42) and have the following +read-only attributes: + + /sys/class/gpio/gpiochipN/ + + "base" ... same as N, the first GPIO managed by this chip + + "label" ... provided for diagnostics (not always unique) + + "ngpio" ... how many GPIOs this manges (N to N + ngpio - 1) + +Board documentation should in most cases cover what GPIOs are used for +what purposes. However, those numbers are not always stable; GPIOs on +a daughtercard might be different depending on the base board being used, +or other cards in the stack. In such cases, you may need to use the +gpiochip nodes (possibly in conjunction with schematics) to determine +the correct GPIO number to use for a given signal. + + +Exporting from Kernel code +-------------------------- +Kernel code can explicitly manage exports of GPIOs which have already been +requested using gpio_request(): + + /* export the GPIO to userspace */ + int gpio_export(unsigned gpio, bool direction_may_change); + + /* reverse gpio_export() */ + void gpio_unexport(); + +After a kernel driver requests a GPIO, it may only be made available in +the sysfs interface by gpio_export(). The driver can control whether the +signal direction may change. This helps drivers prevent userspace code +from accidentally clobbering important system state. + +This explicit exporting can help with debugging (by making some kinds +of experiments easier), or can provide an always-there interface that's +suitable for documenting as part of a board support package. diff --git a/Documentation/ia64/kvm.txt b/Documentation/ia64/kvm.txt index bec9d815da33..914d07f49268 100644 --- a/Documentation/ia64/kvm.txt +++ b/Documentation/ia64/kvm.txt @@ -50,9 +50,9 @@ Note: For step 2, please make sure that host page size == TARGET_PAGE_SIZE of qe /usr/local/bin/qemu-system-ia64 -smp xx -m 512 -hda $your_image (xx is the number of virtual processors for the guest, now the maximum value is 4) -5. Known possibile issue on some platforms with old Firmware. +5. Known possible issue on some platforms with old Firmware. -If meet strange host crashe issues, try to solve it through either of the following ways: +In the event of strange host crash issues, try to solve it through either of the following ways: (1): Upgrade your Firmware to the latest one. @@ -65,8 +65,8 @@ index 0b53344..f02b0f7 100644 mov ar.pfs = loc1 mov rp = loc0 ;; -- srlz.d // seralize restoration of psr.l -+ srlz.i // seralize restoration of psr.l +- srlz.d // serialize restoration of psr.l ++ srlz.i // serialize restoration of psr.l + ;; br.ret.sptk.many b0 END(ia64_pal_call_static) diff --git a/Documentation/input/cs461x.txt b/Documentation/input/cs461x.txt index afe0d6543e09..202e9dbacec3 100644 --- a/Documentation/input/cs461x.txt +++ b/Documentation/input/cs461x.txt @@ -31,7 +31,7 @@ The driver works with ALSA drivers simultaneously. For example, the xracer uses joystick as input device and PCM device as sound output in one time. There are no sound or input collisions detected. The source code have comments about them; but I've found the joystick can be initialized -separately of ALSA modules. So, you canm use only one joystick driver +separately of ALSA modules. So, you can use only one joystick driver without ALSA drivers. The ALSA drivers are not needed to compile or run this driver. diff --git a/Documentation/ioctl/ioctl-decoding.txt b/Documentation/ioctl/ioctl-decoding.txt index bfdf7f3ee4f0..e35efb0cec2e 100644 --- a/Documentation/ioctl/ioctl-decoding.txt +++ b/Documentation/ioctl/ioctl-decoding.txt @@ -1,6 +1,6 @@ To decode a hex IOCTL code: -Most architecures use this generic format, but check +Most architectures use this generic format, but check include/ARCH/ioctl.h for specifics, e.g. powerpc uses 3 bits to encode read/write and 13 bits for size. @@ -18,7 +18,7 @@ uses 3 bits to encode read/write and 13 bits for size. 7-0 function # - So for example 0x82187201 is a read with arg length of 0x218, +So for example 0x82187201 is a read with arg length of 0x218, character 'r' function 1. Grepping the source reveals this is: #define VFAT_IOCTL_READDIR_BOTH _IOR('r', 1, struct dirent [2]) diff --git a/Documentation/iostats.txt b/Documentation/iostats.txt index 5925c3cd030d..59a69ec67c40 100644 --- a/Documentation/iostats.txt +++ b/Documentation/iostats.txt @@ -143,7 +143,7 @@ disk and partition statistics are consistent again. Since we still don't keep record of the partition-relative address, an operation is attributed to the partition which contains the first sector of the request after the eventual merges. As requests can be merged across partition, this could lead -to some (probably insignificant) innacuracy. +to some (probably insignificant) inaccuracy. Additional notes ---------------- diff --git a/Documentation/isdn/README.mISDN b/Documentation/isdn/README.mISDN new file mode 100644 index 000000000000..cd8bf920e77b --- /dev/null +++ b/Documentation/isdn/README.mISDN @@ -0,0 +1,6 @@ +mISDN is a new modular ISDN driver, in the long term it should replace +the old I4L driver architecture for passiv ISDN cards. +It was designed to allow a broad range of applications and interfaces +but only have the basic function in kernel, the interface to the user +space is based on sockets with a own address family AF_ISDN. + diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 30d44b78171a..e7bea3e85304 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -87,7 +87,8 @@ parameter is applicable: SH SuperH architecture is enabled. SMP The kernel is an SMP kernel. SPARC Sparc architecture is enabled. - SWSUSP Software suspend is enabled. + SWSUSP Software suspend (hibernation) is enabled. + SUSPEND System suspend states are enabled. TS Appropriate touchscreen support is enabled. USB USB support is enabled. USBHID USB Human Interface Device support is enabled. @@ -147,10 +148,12 @@ and is between 256 and 4096 characters. It is defined in the file default: 0 acpi_sleep= [HW,ACPI] Sleep options - Format: { s3_bios, s3_mode, s3_beep, old_ordering } + Format: { s3_bios, s3_mode, s3_beep, s4_nohwsig, old_ordering } See Documentation/power/video.txt for s3_bios and s3_mode. s3_beep is for debugging; it makes the PC's speaker beep as soon as the kernel's real-mode entry point is called. + s4_nohwsig prevents ACPI hardware signature from being + used during resume from hibernation. old_ordering causes the ACPI 1.0 ordering of the _PTS control method, wrt putting devices into low power states, to be enforced (the ACPI 2.0 ordering of _PTS is @@ -774,8 +777,22 @@ and is between 256 and 4096 characters. It is defined in the file hisax= [HW,ISDN] See Documentation/isdn/README.HiSax. - hugepages= [HW,X86-32,IA-64] Maximal number of HugeTLB pages. - hugepagesz= [HW,IA-64,PPC] The size of the HugeTLB pages. + hugepages= [HW,X86-32,IA-64] HugeTLB pages to allocate at boot. + hugepagesz= [HW,IA-64,PPC,X86-64] The size of the HugeTLB pages. + On x86-64 and powerpc, this option can be specified + multiple times interleaved with hugepages= to reserve + huge pages of different sizes. Valid pages sizes on + x86-64 are 2M (when the CPU supports "pse") and 1G + (when the CPU supports the "pdpe1gb" cpuinfo flag) + Note that 1GB pages can only be allocated at boot time + using hugepages= and not freed afterwards. + default_hugepagesz= + [same as hugepagesz=] The size of the default + HugeTLB page size. This is the size represented by + the legacy /proc/ hugepages APIs, used for SHM, and + default size when mounting hugetlbfs filesystems. + Defaults to the default architecture's huge page size + if not specified. i8042.direct [HW] Put keyboard port into non-translated mode i8042.dumbkbd [HW] Pretend that controller can only read data from @@ -1225,6 +1242,14 @@ and is between 256 and 4096 characters. It is defined in the file mga= [HW,DRM] + mminit_loglevel= + [KNL] When CONFIG_DEBUG_MEMORY_INIT is set, this + parameter allows control of the logging verbosity for + the additional memory initialisation checks. A value + of 0 disables mminit logging and a level of 4 will + log everything. Information is printed at KERN_DEBUG + so loglevel=8 may also need to be specified. + mousedev.tap_time= [MOUSE] Maximum time between finger touching and leaving touchpad surface for touch to be considered @@ -2034,6 +2059,9 @@ and is between 256 and 4096 characters. It is defined in the file snd-ymfpci= [HW,ALSA] + softlockup_panic= + [KNL] Should the soft-lockup detector generate panics. + sonypi.*= [HW] Sony Programmable I/O Control Device driver See Documentation/sonypi.txt @@ -2098,6 +2126,12 @@ and is between 256 and 4096 characters. It is defined in the file tdfx= [HW,DRM] + test_suspend= [SUSPEND] + Specify "mem" (for Suspend-to-RAM) or "standby" (for + standby suspend) as the system sleep state to briefly + enter during system startup. The system is woken from + this state using a wakeup-capable RTC alarm. + thash_entries= [KNL,NET] Set number of hash buckets for TCP connection @@ -2125,13 +2159,6 @@ and is between 256 and 4096 characters. It is defined in the file : poll all this frequency 0: no polling (default) - tipar.timeout= [HW,PPT] - Set communications timeout in tenths of a second - (default 15). - - tipar.delay= [HW,PPT] - Set inter-bit delay in microseconds (default 10). - tmscsim= [HW,SCSI] See comment before function dc390_setup() in drivers/scsi/tmscsim.c. diff --git a/Documentation/keys.txt b/Documentation/keys.txt index d5c7a57d1700..b56aacc1fff8 100644 --- a/Documentation/keys.txt +++ b/Documentation/keys.txt @@ -864,7 +864,7 @@ payload contents" for more information. request_key_with_auxdata() respectively. These two functions return with the key potentially still under - construction. To wait for contruction completion, the following should be + construction. To wait for construction completion, the following should be called: int wait_for_key_construction(struct key *key, bool intr); diff --git a/Documentation/laptops/thinkpad-acpi.txt b/Documentation/laptops/thinkpad-acpi.txt index 64b3f146e4b0..02dc748b76c4 100644 --- a/Documentation/laptops/thinkpad-acpi.txt +++ b/Documentation/laptops/thinkpad-acpi.txt @@ -1,7 +1,7 @@ ThinkPad ACPI Extras Driver - Version 0.20 - April 09th, 2008 + Version 0.21 + May 29th, 2008 Borislav Deianov Henrique de Moraes Holschuh @@ -621,7 +621,8 @@ Bluetooth --------- procfs: /proc/acpi/ibm/bluetooth -sysfs device attribute: bluetooth_enable +sysfs device attribute: bluetooth_enable (deprecated) +sysfs rfkill class: switch "tpacpi_bluetooth_sw" This feature shows the presence and current state of a ThinkPad Bluetooth device in the internal ThinkPad CDC slot. @@ -643,8 +644,12 @@ Sysfs notes: 0: disables Bluetooth / Bluetooth is disabled 1: enables Bluetooth / Bluetooth is enabled. - Note: this interface will be probably be superseded by the - generic rfkill class, so it is NOT to be considered stable yet. + Note: this interface has been superseded by the generic rfkill + class. It has been deprecated, and it will be removed in year + 2010. + + rfkill controller switch "tpacpi_bluetooth_sw": refer to + Documentation/rfkill.txt for details. Video output control -- /proc/acpi/ibm/video -------------------------------------------- @@ -1374,7 +1379,8 @@ EXPERIMENTAL: WAN ----------------- procfs: /proc/acpi/ibm/wan -sysfs device attribute: wwan_enable +sysfs device attribute: wwan_enable (deprecated) +sysfs rfkill class: switch "tpacpi_wwan_sw" This feature is marked EXPERIMENTAL because the implementation directly accesses hardware registers and may not work as expected. USE @@ -1404,8 +1410,12 @@ Sysfs notes: 0: disables WWAN card / WWAN card is disabled 1: enables WWAN card / WWAN card is enabled. - Note: this interface will be probably be superseded by the - generic rfkill class, so it is NOT to be considered stable yet. + Note: this interface has been superseded by the generic rfkill + class. It has been deprecated, and it will be removed in year + 2010. + + rfkill controller switch "tpacpi_wwan_sw": refer to + Documentation/rfkill.txt for details. Multiple Commands, Module Parameters ------------------------------------ diff --git a/Documentation/leds-class.txt b/Documentation/leds-class.txt index 18860ad9935a..6399557cdab3 100644 --- a/Documentation/leds-class.txt +++ b/Documentation/leds-class.txt @@ -59,7 +59,7 @@ Hardware accelerated blink of LEDs Some LEDs can be programmed to blink without any CPU interaction. To support this feature, a LED driver can optionally implement the -blink_set() function (see ). If implemeted, triggers can +blink_set() function (see ). If implemented, triggers can attempt to use it before falling back to software timers. The blink_set() function should return 0 if the blink setting is supported, or -EINVAL otherwise, which means that LED blinking will be handled by software. diff --git a/Documentation/local_ops.txt b/Documentation/local_ops.txt index 4269a1105b37..f4f8b1c6c8ba 100644 --- a/Documentation/local_ops.txt +++ b/Documentation/local_ops.txt @@ -36,7 +36,7 @@ It can be done by slightly modifying the standard atomic operations : only their UP variant must be kept. It typically means removing LOCK prefix (on i386 and x86_64) and any SMP sychronization barrier. If the architecture does not have a different behavior between SMP and UP, including asm-generic/local.h -in your archtecture's local.h is sufficient. +in your architecture's local.h is sufficient. The local_t type is defined as an opaque signed long by embedding an atomic_long_t inside a structure. This is made so a cast from this type to a diff --git a/Documentation/moxa-smartio b/Documentation/moxa-smartio index fe24ecc6372e..5337e80a5b96 100644 --- a/Documentation/moxa-smartio +++ b/Documentation/moxa-smartio @@ -1,14 +1,22 @@ ============================================================================= + MOXA Smartio/Industio Family Device Driver Installation Guide + for Linux Kernel 2.4.x, 2.6.x + Copyright (C) 2008, Moxa Inc. +============================================================================= +Date: 01/21/2008 - MOXA Smartio Family Device Driver Ver 1.1 Installation Guide - for Linux Kernel 2.2.x and 2.0.3x - Copyright (C) 1999, Moxa Technologies Co, Ltd. -============================================================================= Content 1. Introduction 2. System Requirement 3. Installation + 3.1 Hardware installation + 3.2 Driver files + 3.3 Device naming convention + 3.4 Module driver configuration + 3.5 Static driver configuration for Linux kernel 2.4.x and 2.6.x. + 3.6 Custom configuration + 3.7 Verify driver installation 4. Utilities 5. Setserial 6. Troubleshooting @@ -16,27 +24,48 @@ Content ----------------------------------------------------------------------------- 1. Introduction - The Smartio family Linux driver, Ver. 1.1, supports following multiport + The Smartio/Industio/UPCI family Linux driver supports following multiport boards. - -C104P/H/HS, C104H/PCI, C104HS/PCI, CI-104J 4 port multiport board. - -C168P/H/HS, C168H/PCI 8 port multiport board. + - 2 ports multiport board + CP-102U, CP-102UL, CP-102UF + CP-132U-I, CP-132UL, + CP-132, CP-132I, CP132S, CP-132IS, + CI-132, CI-132I, CI-132IS, + (C102H, C102HI, C102HIS, C102P, CP-102, CP-102S) - This driver has been modified a little and cleaned up from the Moxa - contributed driver code and merged into Linux 2.2.14pre. In particular - official major/minor numbers have been assigned which are different to - those the original Moxa supplied driver used. + - 4 ports multiport board + CP-104EL, + CP-104UL, CP-104JU, + CP-134U, CP-134U-I, + C104H/PCI, C104HS/PCI, + CP-114, CP-114I, CP-114S, CP-114IS, CP-114UL, + C104H, C104HS, + CI-104J, CI-104JS, + CI-134, CI-134I, CI-134IS, + (C114HI, CT-114I, C104P) + POS-104UL, + CB-114, + CB-134I + + - 8 ports multiport board + CP-118EL, CP-168EL, + CP-118U, CP-168U, + C168H/PCI, + C168H, C168HS, + (C168P), + CB-108 This driver and installation procedure have been developed upon Linux Kernel - 2.2.5 and backward compatible to 2.0.3x. This driver supports Intel x86 and - Alpha hardware platform. In order to maintain compatibility, this version - has also been properly tested with RedHat, OpenLinux, TurboLinux and - S.u.S.E Linux. However, if compatibility problem occurs, please contact - Moxa at support@moxa.com.tw. + 2.4.x and 2.6.x. This driver supports Intel x86 hardware platform. In order + to maintain compatibility, this version has also been properly tested with + RedHat, Mandrake, Fedora and S.u.S.E Linux. However, if compatibility problem + occurs, please contact Moxa at support@moxa.com.tw. In addition to device driver, useful utilities are also provided in this version. They are - - msdiag Diagnostic program for detecting installed Moxa Smartio boards. + - msdiag Diagnostic program for displaying installed Moxa + Smartio/Industio boards. - msmon Monitor program to observe data count and line status signals. - msterm A simple terminal program which is useful in testing serial ports. @@ -47,8 +76,7 @@ Content GNU General Public License in this version. Please refer to GNU General Public License announcement in each source code file for more detail. - In Moxa's ftp sites, you may always find latest driver at - ftp://ftp.moxa.com or ftp://ftp.moxa.com.tw. + In Moxa's Web sites, you may always find latest driver at http://web.moxa.com. This version of driver can be installed as Loadable Module (Module driver) or built-in into kernel (Static driver). You may refer to following @@ -61,8 +89,8 @@ Content ----------------------------------------------------------------------------- 2. System Requirement - - Hardware platform: Intel x86 or Alpha machine - - Kernel version: 2.0.3x or 2.2.x + - Hardware platform: Intel x86 machine + - Kernel version: 2.4.x or 2.6.x - gcc version 2.72 or later - Maximum 4 boards can be installed in combination @@ -70,9 +98,18 @@ Content 3. Installation 3.1 Hardware installation + 3.2 Driver files + 3.3 Device naming convention + 3.4 Module driver configuration + 3.5 Static driver configuration for Linux kernel 2.4.x, 2.6.x. + 3.6 Custom configuration + 3.7 Verify driver installation - There are two types of buses, ISA and PCI, for Smartio family multiport - board. + + 3.1 Hardware installation + + There are two types of buses, ISA and PCI, for Smartio/Industio + family multiport board. ISA board --------- @@ -81,47 +118,57 @@ Content installation procedure in User's Manual before proceed any further. Please make sure the JP1 is open after the ISA board is set properly. - PCI board - --------- + PCI/UPCI board + -------------- You may need to adjust IRQ usage in BIOS to avoid from IRQ conflict with other ISA devices. Please refer to hardware installation procedure in User's Manual in advance. - IRQ Sharing + PCI IRQ Sharing ----------- Each port within the same multiport board shares the same IRQ. Up to - 4 Moxa Smartio Family multiport boards can be installed together on - one system and they can share the same IRQ. + 4 Moxa Smartio/Industio PCI Family multiport boards can be installed + together on one system and they can share the same IRQ. - 3.2 Driver files and device naming convention + + 3.2 Driver files The driver file may be obtained from ftp, CD-ROM or floppy disk. The first step, anyway, is to copy driver file "mxser.tgz" into specified directory. e.g. /moxa. The execute commands as below. + # cd / + # mkdir moxa # cd /moxa - # tar xvf /dev/fd0 + # tar xvf /dev/fd0 + or + + # cd / + # mkdir moxa # cd /moxa # cp /mnt/cdrom//mxser.tgz . # tar xvfz mxser.tgz + + 3.3 Device naming convention + You may find all the driver and utilities files in /moxa/mxser. Following installation procedure depends on the model you'd like to - run the driver. If you prefer module driver, please refer to 3.3. - If static driver is required, please refer to 3.4. + run the driver. If you prefer module driver, please refer to 3.4. + If static driver is required, please refer to 3.5. Dialin and callout port ----------------------- - This driver remains traditional serial device properties. There're + This driver remains traditional serial device properties. There are two special file name for each serial port. One is dial-in port which is named "ttyMxx". For callout port, the naming convention is "cumxx". Device naming when more than 2 boards installed ----------------------------------------------- - Naming convention for each Smartio multiport board is pre-defined - as below. + Naming convention for each Smartio/Industio multiport board is + pre-defined as below. Board Num. Dial-in Port Callout port 1st board ttyM0 - ttyM7 cum0 - cum7 @@ -129,6 +176,12 @@ Content 3rd board ttyM16 - ttyM23 cum16 - cum23 4th board ttyM24 - ttym31 cum24 - cum31 + + !!!!!!!!!!!!!!!!!!!! NOTE !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! + Under Kernel 2.6 the cum Device is Obsolete. So use ttyM* + device instead. + !!!!!!!!!!!!!!!!!!!! NOTE !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! + Board sequence -------------- This driver will activate ISA boards according to the parameter set @@ -138,69 +191,131 @@ Content For PCI boards, their sequence will be after ISA boards and C168H/PCI has higher priority than C104H/PCI boards. - 3.3 Module driver configuration + 3.4 Module driver configuration Module driver is easiest way to install. If you prefer static driver installation, please skip this paragraph. - 1. Find "Makefile" in /moxa/mxser, then run - # make install - The driver files "mxser.o" and utilities will be properly compiled - and copied to system directories respectively.Then run + ------------- Prepare to use the MOXA driver-------------------- + 3.4.1 Create tty device with correct major number + Before using MOXA driver, your system must have the tty devices + which are created with driver's major number. We offer one shell + script "msmknod" to simplify the procedure. + This step is only needed to be executed once. But you still + need to do this procedure when: + a. You change the driver's major number. Please refer the "3.7" + section. + b. Your total installed MOXA boards number is changed. Maybe you + add/delete one MOXA board. + c. You want to change the tty name. This needs to modify the + shell script "msmknod" - # insmod mxser - - to activate the modular driver. You may run "lsmod" to check - if "mxser.o" is activated. - - 2. Create special files by executing "msmknod". + The procedure is: # cd /moxa/mxser/driver # ./msmknod - Default major numbers for dial-in device and callout device are - 174, 175. Msmknod will delete any special files occupying the same - device naming. + This shell script will require the major number for dial-in + device and callout device to create tty device. You also need + to specify the total installed MOXA board number. Default major + numbers for dial-in device and callout device are 30, 35. If + you need to change to other number, please refer section "3.7" + for more detailed procedure. + Msmknod will delete any special files occupying the same device + naming. - 3. Up to now, you may manually execute "insmod mxser" to activate - this driver and run "rmmod mxser" to remove it. However, it's - better to have a boot time configuration to eliminate manual - operation. - Boot time configuration can be achieved by rc file. Run following - command for setting rc files. + 3.4.2 Build the MOXA driver and utilities + Before using the MOXA driver and utilities, you need compile the + all the source code. This step is only need to be executed once. + But you still re-compile the source code if you modify the source + code. For example, if you change the driver's major number (see + "3.7" section), then you need to do this step again. + + Find "Makefile" in /moxa/mxser, then run + + # make clean; make install + + !!!!!!!!!! NOTE !!!!!!!!!!!!!!!!! + For Red Hat 9, Red Hat Enterprise Linux AS3/ES3/WS3 & Fedora Core1: + # make clean; make installsp1 + + For Red Hat Enterprise Linux AS4/ES4/WS4: + # make clean; make installsp2 + !!!!!!!!!! NOTE !!!!!!!!!!!!!!!!! + + The driver files "mxser.o" and utilities will be properly compiled + and copied to system directories respectively. + + ------------- Load MOXA driver-------------------- + 3.4.3 Load the MOXA driver + + # modprobe mxser + + will activate the module driver. You may run "lsmod" to check + if "mxser" is activated. If the MOXA board is ISA board, the + is needed. Please refer to section "3.4.5" for more + information. + + + ------------- Load MOXA driver on boot -------------------- + 3.4.4 For the above description, you may manually execute + "modprobe mxser" to activate this driver and run + "rmmod mxser" to remove it. + However, it's better to have a boot time configuration to + eliminate manual operation. Boot time configuration can be + achieved by rc file. We offer one "rc.mxser" file to simplify + the procedure under "moxa/mxser/driver". + + But if you use ISA board, please modify the "modprobe ..." command + to add the argument (see "3.4.5" section). After modifying the + rc.mxser, please try to execute "/moxa/mxser/driver/rc.mxser" + manually to make sure the modification is ok. If any error + encountered, please try to modify again. If the modification is + completed, follow the below step. + + Run following command for setting rc files. # cd /moxa/mxser/driver # cp ./rc.mxser /etc/rc.d # cd /etc/rc.d - You may have to modify part of the content in rc.mxser to specify - parameters for ISA board. Please refer to rc.mxser for more detail. - Find "rc.serial". If "rc.serial" doesn't exist, create it by vi. - Add "rc.mxser" in last line. Next, open rc.local by vi - and append following content. + Check "rc.serial" is existed or not. If "rc.serial" doesn't exist, + create it by vi, run "chmod 755 rc.serial" to change the permission. + Add "/etc/rc.d/rc.mxser" in last line, - if [ -f /etc/rc.d/rc.serial ]; then - sh /etc/rc.d/rc.serial - fi + Reboot and check if moxa.o activated by "lsmod" command. - 4. Reboot and check if mxser.o activated by "lsmod" command. - 5. If you'd like to drive Smartio ISA boards in the system, you'll - have to add parameter to specify CAP address of given board while - activating "mxser.o". The format for parameters are as follows. + 3.4.5. If you'd like to drive Smartio/Industio ISA boards in the system, + you'll have to add parameter to specify CAP address of given + board while activating "mxser.o". The format for parameters are + as follows. - insmod mxser ioaddr=0x???,0x???,0x???,0x??? + modprobe mxser ioaddr=0x???,0x???,0x???,0x??? | | | | | | | +- 4th ISA board | | +------ 3rd ISA board | +------------ 2nd ISA board +------------------- 1st ISA board - 3.4 Static driver configuration + 3.5 Static driver configuration for Linux kernel 2.4.x and 2.6.x - 1. Create link + Note: To use static driver, you must install the linux kernel + source package. + + 3.5.1 Backup the built-in driver in the kernel. + # cd /usr/src/linux/drivers/char + # mv mxser.c mxser.c.old + + For Red Hat 7.x user, you need to create link: + # cd /usr/src + # ln -s linux-2.4 linux + + 3.5.2 Create link # cd /usr/src/linux/drivers/char # ln -s /moxa/mxser/driver/mxser.c mxser.c - 2. Add CAP address list for ISA boards + 3.5.3 Add CAP address list for ISA boards. For PCI boards user, + please skip this step. + In module mode, the CAP address for ISA board is given by parameter. In static driver configuration, you'll have to assign it within driver's source code. If you will not @@ -222,73 +337,55 @@ Content static int mxserBoardCAP[] = {0x280, 0x180, 0x00, 0x00}; - 3. Modify tty_io.c - # cd /usr/src/linux/drivers/char/ - # vi tty_io.c - Find pty_init(), insert "mxser_init()" as + 3.5.4 Setup kernel configuration - pty_init(); - mxser_init(); + Configure the kernel: - 4. Modify tty.h - # cd /usr/src/linux/include/linux - # vi tty.h - Find extern int tty_init(void), insert "mxser_init()" as + # cd /usr/src/linux + # make menuconfig - extern int tty_init(void); - extern int mxser_init(void); - - 5. Modify Makefile - # cd /usr/src/linux/drivers/char - # vi Makefile - Find L_OBJS := tty_io.o ...... random.o, add - "mxser.o" at last of this line as - L_OBJS := tty_io.o ....... mxser.o + You will go into a menu-driven system. Please select [Character + devices][Non-standard serial port support], enable the [Moxa + SmartIO support] driver with "[*]" for built-in (not "[M]"), then + select [Exit] to exit this program. - 6. Rebuild kernel - The following are for Linux kernel rebuilding,for your reference only. + 3.5.5 Rebuild kernel + The following are for Linux kernel rebuilding, for your + reference only. For appropriate details, please refer to the Linux document. - If 'lilo' utility is installed, please use 'make zlilo' to rebuild - kernel. If 'lilo' is not installed, please follow the following steps. - a. cd /usr/src/linux - b. make clean /* take a few minutes */ - c. make bzImage /* take probably 10-20 minutes */ - d. Backup original boot kernel. /* optional step */ - e. cp /usr/src/linux/arch/i386/boot/bzImage /boot/vmlinuz + b. make clean /* take a few minutes */ + c. make dep /* take a few minutes */ + d. make bzImage /* take probably 10-20 minutes */ + e. make install /* copy boot image to correct position */ f. Please make sure the boot kernel (vmlinuz) is in the - correct position. If you use 'lilo' utility, you should - check /etc/lilo.conf 'image' item specified the path - which is the 'vmlinuz' path, or you will load wrong - (or old) boot kernel image (vmlinuz). - g. chmod 400 /vmlinuz - h. lilo - i. rdev -R /vmlinuz 1 - j. sync + correct position. + g. If you use 'lilo' utility, you should check /etc/lilo.conf + 'image' item specified the path which is the 'vmlinuz' path, + or you will load wrong (or old) boot kernel image (vmlinuz). + After checking /etc/lilo.conf, please run "lilo". - Note that if the result of "make zImage" is ERROR, then you have to - go back to Linux configuration Setup. Type "make config" in directory - /usr/src/linux or "setup". + Note that if the result of "make bzImage" is ERROR, then you have to + go back to Linux configuration Setup. Type "make menuconfig" in + directory /usr/src/linux. - Since system include file, /usr/src/linux/include/linux/interrupt.h, - is modified each time the MOXA driver is installed, kernel rebuilding - is inevitable. And it takes about 10 to 20 minutes depends on the - machine. - 7. Make utility - # cd /moxa/mxser/utility - # make install - - 8. Make special file + 3.5.6 Make tty device and special file # cd /moxa/mxser/driver # ./msmknod - 9. Reboot + 3.5.7 Make utility + # cd /moxa/mxser/utility + # make clean; make install - 3.5 Custom configuration + 3.5.8 Reboot + + + + 3.6 Custom configuration Although this driver already provides you default configuration, you - still can change the device name and major number.The instruction to + still can change the device name and major number. The instruction to change these parameters are shown as below. Change Device name @@ -306,33 +403,37 @@ Content 2 free major numbers for this driver. There are 3 steps to change major numbers. - 1. Find free major numbers + 3.6.1 Find free major numbers In /proc/devices, you may find all the major numbers occupied in the system. Please select 2 major numbers that are available. e.g. 40, 45. - 2. Create special files + 3.6.2 Create special files Run /moxa/mxser/driver/msmknod to create special files with specified major numbers. - 3. Modify driver with new major number + 3.6.3 Modify driver with new major number Run vi to open /moxa/mxser/driver/mxser.c. Locate the line contains "MXSERMAJOR". Change the content as below. #define MXSERMAJOR 40 #define MXSERCUMAJOR 45 - 4. Run # make install in /moxa/mxser/driver. + 3.6.4 Run "make clean; make install" in /moxa/mxser/driver. - 3.6 Verify driver installation + 3.7 Verify driver installation You may refer to /var/log/messages to check the latest status log reported by this driver whenever it's activated. + ----------------------------------------------------------------------------- 4. Utilities There are 3 utilities contained in this driver. They are msdiag, msmon and msterm. These 3 utilities are released in form of source code. They should be compiled into executable file and copied into /usr/bin. + Before using these utilities, please load driver (refer 3.4 & 3.5) and + make sure you had run the "msmknod" utility. + msdiag - Diagnostic -------------------- - This utility provides the function to detect what Moxa Smartio multiport - board exists in the system. + This utility provides the function to display what Moxa Smartio/Industio + board found by driver in the system. msmon - Port Monitoring ----------------------- @@ -353,12 +454,13 @@ Content application, for example, sending AT command to a modem connected to the port or used as a terminal for login purpose. Note that this is only a dumb terminal emulation without handling full screen operation. + ----------------------------------------------------------------------------- 5. Setserial Supported Setserial parameters are listed as below. - uart set UART type(16450-->disable FIFO, 16550A-->enable FIFO) + uart set UART type(16450-->disable FIFO, 16550A-->enable FIFO) close_delay set the amount of time(in 1/100 of a second) that DTR should be kept low while being closed. closing_wait set the amount of time(in 1/100 of a second) that the @@ -366,7 +468,13 @@ Content being closed, before the receiver is disable. spd_hi Use 57.6kb when the application requests 38.4kb. spd_vhi Use 115.2kb when the application requests 38.4kb. + spd_shi Use 230.4kb when the application requests 38.4kb. + spd_warp Use 460.8kb when the application requests 38.4kb. spd_normal Use 38.4kb when the application requests 38.4kb. + spd_cust Use the custom divisor to set the speed when the + application requests 38.4kb. + divisor This option set the custom divison. + baud_base This option set the base baud rate. ----------------------------------------------------------------------------- 6. Troubleshooting @@ -375,8 +483,9 @@ Content possible. If all the possible solutions fail, please contact our technical support team to get more help. - Error msg: More than 4 Moxa Smartio family boards found. Fifth board and - after are ignored. + + Error msg: More than 4 Moxa Smartio/Industio family boards found. Fifth board + and after are ignored. Solution: To avoid this problem, please unplug fifth and after board, because Moxa driver supports up to 4 boards. @@ -384,7 +493,7 @@ Content Error msg: Request_irq fail, IRQ(?) may be conflict with another device. Solution: Other PCI or ISA devices occupy the assigned IRQ. If you are not sure - which device causes the situation,please check /proc/interrupts to find + which device causes the situation, please check /proc/interrupts to find free IRQ and simply change another free IRQ for Moxa board. Error msg: Board #: C1xx Series(CAP=xxx) interrupt number invalid. @@ -397,15 +506,18 @@ Content Moxa ISA board needs an interrupt vector.Please refer to user's manual "Hardware Installation" chapter to set interrupt vector. - Error msg: Couldn't install MOXA Smartio family driver! + Error msg: Couldn't install MOXA Smartio/Industio family driver! Solution: Load Moxa driver fail, the major number may conflict with other devices. - Please refer to previous section 3.5 to change a free major number for + Please refer to previous section 3.7 to change a free major number for Moxa driver. - Error msg: Couldn't install MOXA Smartio family callout driver! + Error msg: Couldn't install MOXA Smartio/Industio family callout driver! Solution: Load Moxa callout driver fail, the callout device major number may - conflict with other devices. Please refer to previous section 3.5 to + conflict with other devices. Please refer to previous section 3.7 to change a free callout device major number for Moxa driver. + + ----------------------------------------------------------------------------- + diff --git a/Documentation/networking/bonding.txt b/Documentation/networking/bonding.txt index 7fa7fe71d7a8..688dfe1e6b70 100644 --- a/Documentation/networking/bonding.txt +++ b/Documentation/networking/bonding.txt @@ -631,7 +631,7 @@ xmit_hash_policy in environments where a layer3 gateway device is required to reach most destinations. - This algorithm is 802.3ad complient. + This algorithm is 802.3ad compliant. layer3+4 diff --git a/Documentation/networking/can.txt b/Documentation/networking/can.txt index 641d2afacffa..297ba7b1ccaf 100644 --- a/Documentation/networking/can.txt +++ b/Documentation/networking/can.txt @@ -186,7 +186,7 @@ solution for a couple of reasons: The Linux network devices (by default) just can handle the transmission and reception of media dependent frames. Due to the - arbritration on the CAN bus the transmission of a low prio CAN-ID + arbitration on the CAN bus the transmission of a low prio CAN-ID may be delayed by the reception of a high prio CAN frame. To reflect the correct* traffic on the node the loopback of the sent data has to be performed right after a successful transmission. If @@ -481,7 +481,7 @@ solution for a couple of reasons: - stats_timer: To calculate the Socket CAN core statistics (e.g. current/maximum frames per second) this 1 second timer is invoked at can.ko module start time by default. This timer can be - disabled by using stattimer=0 on the module comandline. + disabled by using stattimer=0 on the module commandline. - debug: (removed since SocketCAN SVN r546) diff --git a/Documentation/networking/packet_mmap.txt b/Documentation/networking/packet_mmap.txt index db0cd5169581..07c53d596035 100644 --- a/Documentation/networking/packet_mmap.txt +++ b/Documentation/networking/packet_mmap.txt @@ -326,7 +326,7 @@ just one call to mmap is needed: mmap(0, size, PROT_READ|PROT_WRITE, MAP_SHARED, fd, 0); If tp_frame_size is a divisor of tp_block_size frames will be -contiguosly spaced by tp_frame_size bytes. If not, each +contiguously spaced by tp_frame_size bytes. If not, each tp_block_size/tp_frame_size frames there will be a gap between the frames. This is because a frame cannot be spawn across two blocks. diff --git a/Documentation/networking/tc-actions-env-rules.txt b/Documentation/networking/tc-actions-env-rules.txt index 01e716d185f4..dcadf6f88e34 100644 --- a/Documentation/networking/tc-actions-env-rules.txt +++ b/Documentation/networking/tc-actions-env-rules.txt @@ -4,26 +4,27 @@ The "enviromental" rules for authors of any new tc actions are: 1) If you stealeth or borroweth any packet thou shalt be branching from the righteous path and thou shalt cloneth. -For example if your action queues a packet to be processed later -or intentionaly branches by redirecting a packet then you need to +For example if your action queues a packet to be processed later, +or intentionally branches by redirecting a packet, then you need to clone the packet. + There are certain fields in the skb tc_verd that need to be reset so we -avoid loops etc. A few are generic enough so much so that skb_act_clone() -resets them for you. So invoke skb_act_clone() rather than skb_clone() +avoid loops, etc. A few are generic enough that skb_act_clone() +resets them for you, so invoke skb_act_clone() rather than skb_clone(). 2) If you munge any packet thou shalt call pskb_expand_head in the case someone else is referencing the skb. After that you "own" the skb. You must also tell us if it is ok to munge the packet (TC_OK2MUNGE), this way any action downstream can stomp on the packet. -3) dropping packets you dont own is a nono. You simply return +3) Dropping packets you don't own is a no-no. You simply return TC_ACT_SHOT to the caller and they will drop it. The "enviromental" rules for callers of actions (qdiscs etc) are: -*) thou art responsible for freeing anything returned as being +*) Thou art responsible for freeing anything returned as being TC_ACT_SHOT/STOLEN/QUEUED. If none of TC_ACT_SHOT/STOLEN/QUEUED is -returned then all is great and you dont need to do anything. +returned, then all is great and you don't need to do anything. Post on netdev if something is unclear. diff --git a/Documentation/power/00-INDEX b/Documentation/power/00-INDEX index a55d7f1c836d..fb742c213c9e 100644 --- a/Documentation/power/00-INDEX +++ b/Documentation/power/00-INDEX @@ -1,5 +1,7 @@ 00-INDEX - This file +apm-acpi.txt + - basic info about the APM and ACPI support. basic-pm-debugging.txt - Debugging suspend and resume devices.txt @@ -14,8 +16,6 @@ notifiers.txt - Registering suspend notifiers in device drivers pci.txt - How the PCI Subsystem Does Power Management -pm.txt - - info on Linux power management support. pm_qos_interface.txt - info on Linux PM Quality of Service interface power_supply_class.txt diff --git a/Documentation/power/apm-acpi.txt b/Documentation/power/apm-acpi.txt new file mode 100644 index 000000000000..1bd799dc17e8 --- /dev/null +++ b/Documentation/power/apm-acpi.txt @@ -0,0 +1,32 @@ +APM or ACPI? +------------ +If you have a relatively recent x86 mobile, desktop, or server system, +odds are it supports either Advanced Power Management (APM) or +Advanced Configuration and Power Interface (ACPI). ACPI is the newer +of the two technologies and puts power management in the hands of the +operating system, allowing for more intelligent power management than +is possible with BIOS controlled APM. + +The best way to determine which, if either, your system supports is to +build a kernel with both ACPI and APM enabled (as of 2.3.x ACPI is +enabled by default). If a working ACPI implementation is found, the +ACPI driver will override and disable APM, otherwise the APM driver +will be used. + +No, sorry, you cannot have both ACPI and APM enabled and running at +once. Some people with broken ACPI or broken APM implementations +would like to use both to get a full set of working features, but you +simply cannot mix and match the two. Only one power management +interface can be in control of the machine at once. Think about it.. + +User-space Daemons +------------------ +Both APM and ACPI rely on user-space daemons, apmd and acpid +respectively, to be completely functional. Obtain both of these +daemons from your Linux distribution or from the Internet (see below) +and be sure that they are started sometime in the system boot process. +Go ahead and start both. If ACPI or APM is not available on your +system the associated daemon will exit gracefully. + + apmd: http://worldvisions.ca/~apenwarr/apmd/ + acpid: http://acpid.sf.net/ diff --git a/Documentation/power/pm.txt b/Documentation/power/pm.txt deleted file mode 100644 index be841507e43f..000000000000 --- a/Documentation/power/pm.txt +++ /dev/null @@ -1,257 +0,0 @@ - Linux Power Management Support - -This document briefly describes how to use power management with your -Linux system and how to add power management support to Linux drivers. - -APM or ACPI? ------------- -If you have a relatively recent x86 mobile, desktop, or server system, -odds are it supports either Advanced Power Management (APM) or -Advanced Configuration and Power Interface (ACPI). ACPI is the newer -of the two technologies and puts power management in the hands of the -operating system, allowing for more intelligent power management than -is possible with BIOS controlled APM. - -The best way to determine which, if either, your system supports is to -build a kernel with both ACPI and APM enabled (as of 2.3.x ACPI is -enabled by default). If a working ACPI implementation is found, the -ACPI driver will override and disable APM, otherwise the APM driver -will be used. - -No, sorry, you cannot have both ACPI and APM enabled and running at -once. Some people with broken ACPI or broken APM implementations -would like to use both to get a full set of working features, but you -simply cannot mix and match the two. Only one power management -interface can be in control of the machine at once. Think about it.. - -User-space Daemons ------------------- -Both APM and ACPI rely on user-space daemons, apmd and acpid -respectively, to be completely functional. Obtain both of these -daemons from your Linux distribution or from the Internet (see below) -and be sure that they are started sometime in the system boot process. -Go ahead and start both. If ACPI or APM is not available on your -system the associated daemon will exit gracefully. - - apmd: http://worldvisions.ca/~apenwarr/apmd/ - acpid: http://acpid.sf.net/ - -Driver Interface -- OBSOLETE, DO NOT USE! -----------------************************* - -Note: pm_register(), pm_access(), pm_dev_idle() and friends are -obsolete. Please do not use them. Instead you should properly hook -your driver into the driver model, and use its suspend()/resume() -callbacks to do this kind of stuff. - -If you are writing a new driver or maintaining an old driver, it -should include power management support. Without power management -support, a single driver may prevent a system with power management -capabilities from ever being able to suspend (safely). - -Overview: -1) Register each instance of a device with "pm_register" -2) Call "pm_access" before accessing the hardware. - (this will ensure that the hardware is awake and ready) -3) Your "pm_callback" is called before going into a - suspend state (ACPI D1-D3) or after resuming (ACPI D0) - from a suspend. -4) Call "pm_dev_idle" when the device is not being used - (optional but will improve device idle detection) -5) When unloaded, unregister the device with "pm_unregister" - -/* - * Description: Register a device with the power-management subsystem - * - * Parameters: - * type - device type (PCI device, system device, ...) - * id - instance number or unique identifier - * cback - request handler callback (suspend, resume, ...) - * - * Returns: Registered PM device or NULL on error - * - * Examples: - * dev = pm_register(PM_SYS_DEV, PM_SYS_VGA, vga_callback); - * - * struct pci_dev *pci_dev = pci_find_dev(...); - * dev = pm_register(PM_PCI_DEV, PM_PCI_ID(pci_dev), callback); - */ -struct pm_dev *pm_register(pm_dev_t type, unsigned long id, pm_callback cback); - -/* - * Description: Unregister a device with the power management subsystem - * - * Parameters: - * dev - PM device previously returned from pm_register - */ -void pm_unregister(struct pm_dev *dev); - -/* - * Description: Unregister all devices with a matching callback function - * - * Parameters: - * cback - previously registered request callback - * - * Notes: Provided for easier porting from old APM interface - */ -void pm_unregister_all(pm_callback cback); - -/* - * Power management request callback - * - * Parameters: - * dev - PM device previously returned from pm_register - * rqst - request type - * data - data, if any, associated with the request - * - * Returns: 0 if the request is successful - * EINVAL if the request is not supported - * EBUSY if the device is now busy and cannot handle the request - * ENOMEM if the device was unable to handle the request due to memory - * - * Details: The device request callback will be called before the - * device/system enters a suspend state (ACPI D1-D3) or - * or after the device/system resumes from suspend (ACPI D0). - * For PM_SUSPEND, the ACPI D-state being entered is passed - * as the "data" argument to the callback. The device - * driver should save (PM_SUSPEND) or restore (PM_RESUME) - * device context when the request callback is called. - * - * Once a driver returns 0 (success) from a suspend - * request, it should not process any further requests or - * access the device hardware until a call to "pm_access" is made. - */ -typedef int (*pm_callback)(struct pm_dev *dev, pm_request_t rqst, void *data); - -Driver Details --------------- -This is just a quick Q&A as a stopgap until a real driver writers' -power management guide is available. - -Q: When is a device suspended? - -Devices can be suspended based on direct user request (eg. laptop lid -closes), system power policy (eg. sleep after 30 minutes of console -inactivity), or device power policy (eg. power down device after 5 -minutes of inactivity) - -Q: Must a driver honor a suspend request? - -No, a driver can return -EBUSY from a suspend request and this -will stop the system from suspending. When a suspend request -fails, all suspended devices are resumed and the system continues -to run. Suspend can be retried at a later time. - -Q: Can the driver block suspend/resume requests? - -Yes, a driver can delay its return from a suspend or resume -request until the device is ready to handle requests. It -is advantageous to return as quickly as possible from a -request as suspend/resume are done serially. - -Q: What context is a suspend/resume initiated from? - -A suspend or resume is initiated from a kernel thread context. -It is safe to block, allocate memory, initiate requests -or anything else you can do within the kernel. - -Q: Will requests continue to arrive after a suspend? - -Possibly. It is the driver's responsibility to queue(*), -fail, or drop any requests that arrive after returning -success to a suspend request. It is important that the -driver not access its device until after it receives -a resume request as the device's bus may no longer -be active. - -(*) If a driver queues requests for processing after - resume be aware that the device, network, etc. - might be in a different state than at suspend time. - It's probably better to drop requests unless - the driver is a storage device. - -Q: Do I have to manage bus-specific power management registers - -No. It is the responsibility of the bus driver to manage -PCI, USB, etc. power management registers. The bus driver -or the power management subsystem will also enable any -wake-on functionality that the device has. - -Q: So, really, what do I need to do to support suspend/resume? - -You need to save any device context that would -be lost if the device was powered off and then restore -it at resume time. When ACPI is active, there are -three levels of device suspend states; D1, D2, and D3. -(The suspend state is passed as the "data" argument -to the device callback.) With D3, the device is powered -off and loses all context, D1 and D2 are shallower power -states and require less device context to be saved. To -play it safe, just save everything at suspend and restore -everything at resume. - -Q: Where do I store device context for suspend? - -Anywhere in memory, kmalloc a buffer or store it -in the device descriptor. You are guaranteed that the -contents of memory will be restored and accessible -before resume, even when the system suspends to disk. - -Q: What do I need to do for ACPI vs. APM vs. etc? - -Drivers need not be aware of the specific power management -technology that is active. They just need to be aware -of when the overlying power management system requests -that they suspend or resume. - -Q: What about device dependencies? - -When a driver registers a device, the power management -subsystem uses the information provided to build a -tree of device dependencies (eg. USB device X is on -USB controller Y which is on PCI bus Z) When power -management wants to suspend a device, it first sends -a suspend request to its driver, then the bus driver, -and so on up to the system bus. Device resumes -proceed in the opposite direction. - -Q: Who do I contact for additional information about - enabling power management for my specific driver/device? - -ACPI Development mailing list: linux-acpi@vger.kernel.org - -System Interface -- OBSOLETE, DO NOT USE! -----------------************************* -If you are providing new power management support to Linux (ie. -adding support for something like APM or ACPI), you should -communicate with drivers through the existing generic power -management interface. - -/* - * Send a request to all devices - * - * Parameters: - * rqst - request type - * data - data, if any, associated with the request - * - * Returns: 0 if the request is successful - * See "pm_callback" return for errors - * - * Details: Walk list of registered devices and call pm_send - * for each until complete or an error is encountered. - * If an error is encountered for a suspend request, - * return all devices to the state they were in before - * the suspend request. - */ -int pm_send_all(pm_request_t rqst, void *data); - -/* - * Find a matching device - * - * Parameters: - * type - device type (PCI device, system device, or 0 to match all devices) - * from - previous match or NULL to start from the beginning - * - * Returns: Matching device or NULL if none found - */ -struct pm_dev *pm_find(pm_dev_t type, struct pm_dev *from); diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt index ea1b70b35793..928a79ceb7aa 100644 --- a/Documentation/powerpc/booting-without-of.txt +++ b/Documentation/powerpc/booting-without-of.txt @@ -59,6 +59,7 @@ Table of Contents p) Freescale Synchronous Serial Interface q) USB EHCI controllers r) MDIO on GPIOs + s) SPI busses VII - Marvell Discovery mv64[345]6x System Controller chips 1) The /system-controller node @@ -707,7 +708,7 @@ device or bus to be described by the device tree. In general, the format of an address for a device is defined by the parent bus type, based on the #address-cells and #size-cells properties. Note that the parent's parent definitions of #address-cells -and #size-cells are not inhereted so every node with children must specify +and #size-cells are not inherited so every node with children must specify them. The kernel requires the root node to have those properties defining addresses format for devices directly mapped on the processor bus. @@ -1776,7 +1777,7 @@ platforms are moved over to use the flattened-device-tree model. Xilinx uartlite devices are simple fixed speed serial ports. - Requred properties: + Required properties: - current-speed : Baud rate of uartlite v) Xilinx hwicap @@ -1798,7 +1799,7 @@ platforms are moved over to use the flattened-device-tree model. Xilinx UART 16550 devices are very similar to the NS16550 but with different register spacing and an offset from the base address. - Requred properties: + Required properties: - clock-frequency : Frequency of the clock input - reg-offset : A value of 3 is required - reg-shift : A value of 2 is required @@ -1883,6 +1884,62 @@ platforms are moved over to use the flattened-device-tree model. &qe_pio_c 6>; }; + s) SPI (Serial Peripheral Interface) busses + + SPI busses can be described with a node for the SPI master device + and a set of child nodes for each SPI slave on the bus. For this + discussion, it is assumed that the system's SPI controller is in + SPI master mode. This binding does not describe SPI controllers + in slave mode. + + The SPI master node requires the following properties: + - #address-cells - number of cells required to define a chip select + address on the SPI bus. + - #size-cells - should be zero. + - compatible - name of SPI bus controller following generic names + recommended practice. + No other properties are required in the SPI bus node. It is assumed + that a driver for an SPI bus device will understand that it is an SPI bus. + However, the binding does not attempt to define the specific method for + assigning chip select numbers. Since SPI chip select configuration is + flexible and non-standardized, it is left out of this binding with the + assumption that board specific platform code will be used to manage + chip selects. Individual drivers can define additional properties to + support describing the chip select layout. + + SPI slave nodes must be children of the SPI master node and can + contain the following properties. + - reg - (required) chip select address of device. + - compatible - (required) name of SPI device following generic names + recommended practice + - spi-max-frequency - (required) Maximum SPI clocking speed of device in Hz + - spi-cpol - (optional) Empty property indicating device requires + inverse clock polarity (CPOL) mode + - spi-cpha - (optional) Empty property indicating device requires + shifted clock phase (CPHA) mode + + SPI example for an MPC5200 SPI bus: + spi@f00 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi"; + reg = <0xf00 0x20>; + interrupts = <2 13 0 2 14 0>; + interrupt-parent = <&mpc5200_pic>; + + ethernet-switch@0 { + compatible = "micrel,ks8995m"; + spi-max-frequency = <1000000>; + reg = <0>; + }; + + codec@1 { + compatible = "ti,tlv320aic26"; + spi-max-frequency = <100000>; + reg = <1>; + }; + }; + VII - Marvell Discovery mv64[345]6x System Controller chips =========================================================== @@ -1896,7 +1953,7 @@ prefixed with the string "marvell,", for Marvell Technology Group Ltd. 1) The /system-controller node This node is used to represent the system-controller and must be - present when the system uses a system contller chip. The top-level + present when the system uses a system controller chip. The top-level system-controller node contains information that is global to all devices within the system controller chip. The node name begins with "system-controller" followed by the unit address, which is diff --git a/Documentation/powerpc/qe_firmware.txt b/Documentation/powerpc/qe_firmware.txt index 896266432d33..06da4d4b44f9 100644 --- a/Documentation/powerpc/qe_firmware.txt +++ b/Documentation/powerpc/qe_firmware.txt @@ -217,7 +217,7 @@ Although it is not recommended, you can specify '0' in the soc.model field to skip matching SOCs altogether. The 'model' field is a 16-bit number that matches the actual SOC. The -'major' and 'minor' fields are the major and minor revision numbrs, +'major' and 'minor' fields are the major and minor revision numbers, respectively, of the SOC. For example, to match the 8323, revision 1.0: diff --git a/Documentation/s390/driver-model.txt b/Documentation/s390/driver-model.txt index e938c442277d..bde473df748d 100644 --- a/Documentation/s390/driver-model.txt +++ b/Documentation/s390/driver-model.txt @@ -25,7 +25,7 @@ device 4711 via subchannel 1 in subchannel set 0, and subchannel 2 is a non-I/O subchannel. Device 1234 is accessed via subchannel 0 in subchannel set 1. The subchannel named 'defunct' does not represent any real subchannel on the -system; it is a pseudo subchannel where disconnnected ccw devices are moved to +system; it is a pseudo subchannel where disconnected ccw devices are moved to if they are displaced by another ccw device becoming operational on their former subchannel. The ccw devices will be moved again to a proper subchannel if they become operational again on that subchannel. diff --git a/Documentation/scsi/ibmmca.txt b/Documentation/scsi/ibmmca.txt index a810421f1fb3..3920f28710c4 100644 --- a/Documentation/scsi/ibmmca.txt +++ b/Documentation/scsi/ibmmca.txt @@ -524,7 +524,7 @@ - Michael Lang June 25 1997: (v1.8b) - 1) Some cosmetical changes for the handling of SCSI-device-types. + 1) Some cosmetic changes for the handling of SCSI-device-types. Now, also CD-Burners / WORMs and SCSI-scanners should work. For MO-drives I have no experience, therefore not yet supported. In logical_devices I changed from different type-variables to one @@ -914,7 +914,7 @@ in version 4.0. This was never really necessary, as all troubles were based on non-command related reasons up to now, so bypassing commands did not help to avoid any bugs. It is kept in 3.2X for debugging reasons. - 5) Dynamical reassignment of ldns was again verified and analyzed to be + 5) Dynamic reassignment of ldns was again verified and analyzed to be completely inoperational. This is corrected and should work now. 6) All commands that get sent to the SCSI adapter were verified and completed in such a way, that they are now completely conform to the @@ -1386,7 +1386,7 @@ concerning the Linux-kernel in special, this SCSI-driver comes without any warranty. Its functionality is tested as good as possible on certain machines and combinations of computer hardware, which does not exclude, - that dataloss or severe damage of hardware is possible while using this + that data loss or severe damage of hardware is possible while using this part of software on some arbitrary computer hardware or in combination with other software packages. It is highly recommended to make backup copies of your data before using this software. Furthermore, personal diff --git a/Documentation/scsi/lpfc.txt b/Documentation/scsi/lpfc.txt index 4dbe41370a6d..5741ea8aa88a 100644 --- a/Documentation/scsi/lpfc.txt +++ b/Documentation/scsi/lpfc.txt @@ -36,7 +36,7 @@ Cable pull and temporary device Loss: being removed, a switch rebooting, or a device reboot), the driver could hide the disappearance of the device from the midlayer. I/O's issued to the LLDD would simply be queued for a short duration, allowing the device - to reappear or link come back alive, with no inadvertant side effects + to reappear or link come back alive, with no inadvertent side effects to the system. If the driver did not hide these conditions, i/o would be errored by the driver, the mid-layer would exhaust its retries, and the device would be taken offline. Manual intervention would be required to diff --git a/Documentation/scsi/scsi_fc_transport.txt b/Documentation/scsi/scsi_fc_transport.txt index d403e46d8463..75143f0c23b6 100644 --- a/Documentation/scsi/scsi_fc_transport.txt +++ b/Documentation/scsi/scsi_fc_transport.txt @@ -65,7 +65,7 @@ Overview: discussion will concentrate on NPIV. Note: World Wide Name assignment (and uniqueness guarantees) are left - up to an administrative entity controling the vport. For example, + up to an administrative entity controlling the vport. For example, if vports are to be associated with virtual machines, a XEN mgmt utility would be responsible for creating wwpn/wwnn's for the vport, using it's own naming authority and OUI. (Note: it already does this @@ -91,7 +91,7 @@ Device Trees and Vport Objects: Here's what to expect in the device tree : The typical Physical Port's Scsi_Host: /sys/devices/.../host17/ - and it has the typical decendent tree: + and it has the typical descendant tree: /sys/devices/.../host17/rport-17:0-0/target17:0:0/17:0:0:0: and then the vport is created on the Physical Port: /sys/devices/.../host17/vport-17:0-0 @@ -192,7 +192,7 @@ Vport States: independent of the adapter's link state. - Instantiation of the vport on the FC link via ELS traffic, etc. This is equivalent to a "link up" and successfull link initialization. - Futher information can be found in the interfaces section below for + Further information can be found in the interfaces section below for Vport Creation. Once a vport has been instantiated with the kernel/LLDD, a vport state diff --git a/Documentation/sh/clk.txt b/Documentation/sh/clk.txt index 9aef710e9a4b..114b595cfa97 100644 --- a/Documentation/sh/clk.txt +++ b/Documentation/sh/clk.txt @@ -12,7 +12,7 @@ means no changes to adjanced clock Internally, the clk_set_rate_ex forwards request to clk->ops->set_rate method, if it is present in ops structure. The method should set the clock rate and adjust all needed clocks according to the passed algo_id. -Exact values for algo_id are machine-dependend. For the sh7722, the following +Exact values for algo_id are machine-dependent. For the sh7722, the following values are defined: NO_CHANGE = 0, diff --git a/Documentation/sound/alsa/Audiophile-Usb.txt b/Documentation/sound/alsa/Audiophile-Usb.txt index 2ad5e6306c44..a4c53d8961e1 100644 --- a/Documentation/sound/alsa/Audiophile-Usb.txt +++ b/Documentation/sound/alsa/Audiophile-Usb.txt @@ -236,15 +236,15 @@ The parameter can be given: alias snd-card-1 snd-usb-audio options snd-usb-audio index=1 device_setup=0x09 -CAUTION when initializaing the device +CAUTION when initializing the device ------------------------------------- * Correct initialization on the device requires that device_setup is given to the module BEFORE the device is turned on. So, if you use the "manual probing" method described above, take care to power-on the device AFTER this initialization. - * Failing to respect this will lead in a misconfiguration of the device. In this case - turn off the device, unproble the snd-usb-audio module, then probe it again with + * Failing to respect this will lead to a misconfiguration of the device. In this case + turn off the device, unprobe the snd-usb-audio module, then probe it again with correct device_setup parameter and then (and only then) turn on the device again. * If you've correctly initialized the device in a valid mode and then want to switch @@ -388,9 +388,9 @@ There are 2 main potential issues when using Jackd with the device: Jack supports big endian devices only in recent versions (thanks to Andreas Steinmetz for his first big-endian patch). I can't remember -extacly when this support was released into jackd, let's just say that +exactly when this support was released into jackd, let's just say that with jackd version 0.103.0 it's almost ok (just a small bug is affecting -16bits Big-Endian devices, but since you've read carefully the above +16bits Big-Endian devices, but since you've read carefully the above paragraphs, you're now using kernel >= 2.6.23 and your 16bits devices are now Little Endians ;-) ). diff --git a/Documentation/sound/alsa/hda_codec.txt b/Documentation/sound/alsa/hda_codec.txt index 8e1b02526698..34e87ec1379c 100644 --- a/Documentation/sound/alsa/hda_codec.txt +++ b/Documentation/sound/alsa/hda_codec.txt @@ -67,7 +67,7 @@ CONFIG_SND_HDA_POWER_SAVE kconfig. It's called when the codec needs to power up or may power down. The controller should check the all belonging codecs on the bus whether they are actually powered off (check codec->power_on), and optionally the driver may power down the -contoller side, too. +controller side, too. The bus instance is created via snd_hda_bus_new(). You need to pass the card instance, the template, and the pointer to store the diff --git a/Documentation/sound/alsa/soc/dapm.txt b/Documentation/sound/alsa/soc/dapm.txt index c784a18b94dc..b2ed6983f40d 100644 --- a/Documentation/sound/alsa/soc/dapm.txt +++ b/Documentation/sound/alsa/soc/dapm.txt @@ -68,7 +68,7 @@ Audio DAPM widgets fall into a number of types:- (Widgets are defined in include/sound/soc-dapm.h) Widgets are usually added in the codec driver and the machine driver. There are -convience macros defined in soc-dapm.h that can be used to quickly build a +convenience macros defined in soc-dapm.h that can be used to quickly build a list of widgets of the codecs and machines DAPM widgets. Most widgets have a name, register, shift and invert. Some widgets have extra diff --git a/Documentation/sysctl/vm.txt b/Documentation/sysctl/vm.txt index 8a4863c4edd4..d79eeda7a699 100644 --- a/Documentation/sysctl/vm.txt +++ b/Documentation/sysctl/vm.txt @@ -116,7 +116,7 @@ of kilobytes free. The VM uses this number to compute a pages_min value for each lowmem zone in the system. Each lowmem zone gets a number of reserved free pages based proportionally on its size. -Some minimal ammount of memory is needed to satisfy PF_MEMALLOC +Some minimal amount of memory is needed to satisfy PF_MEMALLOC allocations; if you set this to lower than 1024KB, your system will become subtly broken, and prone to deadlock under high loads. diff --git a/Documentation/timers/highres.txt b/Documentation/timers/highres.txt index a73ecf5b4bdb..21332233cef1 100644 --- a/Documentation/timers/highres.txt +++ b/Documentation/timers/highres.txt @@ -125,7 +125,7 @@ increase of flexibility and the avoidance of duplicated code across architectures justifies the slight increase of the binary size. The conversion of an architecture has no functional impact, but allows to -utilize the high resolution and dynamic tick functionalites without any change +utilize the high resolution and dynamic tick functionalities without any change to the clock event device and timer interrupt code. After the conversion the enabling of high resolution timers and dynamic ticks is simply provided by adding the kernel/time/Kconfig file to the architecture specific Kconfig and diff --git a/Documentation/unaligned-memory-access.txt b/Documentation/unaligned-memory-access.txt index b0472ac5226a..f866c72291bf 100644 --- a/Documentation/unaligned-memory-access.txt +++ b/Documentation/unaligned-memory-access.txt @@ -218,9 +218,35 @@ If use of such macros is not convenient, another option is to use memcpy(), where the source or destination (or both) are of type u8* or unsigned char*. Due to the byte-wise nature of this operation, unaligned accesses are avoided. --- -Author: Daniel Drake -With help from: Alan Cox, Avuton Olrich, Heikki Orsila, Jan Engelhardt, -Johannes Berg, Kyle McMartin, Kyle Moffett, Randy Dunlap, Robert Hancock, -Uli Kunitz, Vadim Lobanov + +Alignment vs. Networking +======================== + +On architectures that require aligned loads, networking requires that the IP +header is aligned on a four-byte boundary to optimise the IP stack. For +regular ethernet hardware, the constant NET_IP_ALIGN is used. On most +architectures this constant has the value 2 because the normal ethernet +header is 14 bytes long, so in order to get proper alignment one needs to +DMA to an address which can be expressed as 4*n + 2. One notable exception +here is powerpc which defines NET_IP_ALIGN to 0 because DMA to unaligned +addresses can be very expensive and dwarf the cost of unaligned loads. + +For some ethernet hardware that cannot DMA to unaligned addresses like +4*n+2 or non-ethernet hardware, this can be a problem, and it is then +required to copy the incoming frame into an aligned buffer. Because this is +unnecessary on architectures that can do unaligned accesses, the code can be +made dependent on CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS like so: + +#ifdef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS + skb = original skb +#else + skb = copy skb +#endif + +-- +Authors: Daniel Drake , + Johannes Berg +With help from: Alan Cox, Avuton Olrich, Heikki Orsila, Jan Engelhardt, +Kyle McMartin, Kyle Moffett, Randy Dunlap, Robert Hancock, Uli Kunitz, +Vadim Lobanov diff --git a/Documentation/usb/authorization.txt b/Documentation/usb/authorization.txt index 2af400609498..381b22ee7834 100644 --- a/Documentation/usb/authorization.txt +++ b/Documentation/usb/authorization.txt @@ -8,7 +8,7 @@ not) in a system. This feature will allow you to implement a lock-down of USB devices, fully controlled by user space. As of now, when a USB device is connected it is configured and -it's interfaces inmediately made available to the users. With this +its interfaces are immediately made available to the users. With this modification, only if root authorizes the device to be configured will then it be possible to use it. diff --git a/Documentation/video4linux/sn9c102.txt b/Documentation/video4linux/sn9c102.txt index b26f5195af51..73de4050d637 100644 --- a/Documentation/video4linux/sn9c102.txt +++ b/Documentation/video4linux/sn9c102.txt @@ -157,7 +157,7 @@ Loading can be done as shown below: [root@localhost home]# modprobe sn9c102 -Note that the module is called "sn9c102" for historic reasons, althought it +Note that the module is called "sn9c102" for historic reasons, although it does not just support the SN9C102. At this point all the devices supported by the driver and connected to the USB diff --git a/Documentation/vm/hugetlbpage.txt b/Documentation/vm/hugetlbpage.txt index 3102b81bef88..ea8714fcc3ad 100644 --- a/Documentation/vm/hugetlbpage.txt +++ b/Documentation/vm/hugetlbpage.txt @@ -77,7 +77,7 @@ memory that is preset in system at this time. System administrators may want to put this command in one of the local rc init files. This will enable the kernel to request huge pages early in the boot process (when the possibility of getting physical contiguous pages is still very high). In either -case, adminstrators will want to verify the number of hugepages actually +case, administrators will want to verify the number of hugepages actually allocated by checking the sysctl or meminfo. /proc/sys/vm/nr_overcommit_hugepages indicates how large the pool of @@ -95,6 +95,29 @@ this condition holds, however, no more surplus huge pages will be allowed on the system until one of the two sysctls are increased sufficiently, or the surplus huge pages go out of use and are freed. +With support for multiple hugepage pools at run-time available, much of +the hugepage userspace interface has been duplicated in sysfs. The above +information applies to the default hugepage size (which will be +controlled by the proc interfaces for backwards compatibility). The root +hugepage control directory is + + /sys/kernel/mm/hugepages + +For each hugepage size supported by the running kernel, a subdirectory +will exist, of the form + + hugepages-${size}kB + +Inside each of these directories, the same set of files will exist: + + nr_hugepages + nr_overcommit_hugepages + free_hugepages + resv_hugepages + surplus_hugepages + +which function as described above for the default hugepage-sized case. + If the user applications are going to request hugepages using mmap system call, then it is required that system administrator mount a file system of type hugetlbfs: diff --git a/Documentation/vm/numa_memory_policy.txt b/Documentation/vm/numa_memory_policy.txt index bad16d3f6a47..6aaaeb38730c 100644 --- a/Documentation/vm/numa_memory_policy.txt +++ b/Documentation/vm/numa_memory_policy.txt @@ -58,7 +58,7 @@ most general to most specific: the policy at the time they were allocated. VMA Policy: A "VMA" or "Virtual Memory Area" refers to a range of a task's - virtual adddress space. A task may define a specific policy for a range + virtual address space. A task may define a specific policy for a range of its virtual address space. See the MEMORY POLICIES APIS section, below, for an overview of the mbind() system call used to set a VMA policy. @@ -353,7 +353,7 @@ follows: Because of this extra reference counting, and because we must lookup shared policies in a tree structure under spinlock, shared policies are - more expensive to use in the page allocation path. This is expecially + more expensive to use in the page allocation path. This is especially true for shared policies on shared memory regions shared by tasks running on different NUMA nodes. This extra overhead can be avoided by always falling back to task or system default policy for shared memory regions, diff --git a/Documentation/volatile-considered-harmful.txt b/Documentation/volatile-considered-harmful.txt index 10c2e411cca8..991c26a6ef64 100644 --- a/Documentation/volatile-considered-harmful.txt +++ b/Documentation/volatile-considered-harmful.txt @@ -114,6 +114,6 @@ CREDITS Original impetus and research by Randy Dunlap Written by Jonathan Corbet -Improvements via coments from Satyam Sharma, Johannes Stezenbach, Jesper +Improvements via comments from Satyam Sharma, Johannes Stezenbach, Jesper Juhl, Heikki Orsila, H. Peter Anvin, Philipp Hahn, and Stefan Richter. diff --git a/MAINTAINERS b/MAINTAINERS index 0652ab384d51..03c5d6ccb9f8 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -441,10 +441,7 @@ M: spyro@f2s.com S: Maintained ARM PRIMECELL MMCI PL180/1 DRIVER -P: Russell King -M: rmk@arm.linux.org.uk -L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) -S: Maintained +S: Orphan ARM/ADI ROADRUNNER MACHINE SUPPORT P: Lennert Buytenhek @@ -483,11 +480,28 @@ M: kernel@wantstofly.org L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) S: Maintained +ARM/COMPULAB CM-X270/EM-X270 MACHINE SUPPORT +P: Mike Rapoport +M: mike@compulab.co.il +L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) +S: Maintained + ARM/CORGI MACHINE SUPPORT P: Richard Purdie M: rpurdie@rpsys.net S: Maintained +ARM/EZX SMARTPHONES (A780, A910, A1200, E680, ROKR E2 and ROKR E6) +P: Daniel Ribeiro +M: drwyrm@gmail.com +P: Stefan Schmidt +M: stefan@openezx.org +P: Harald Welte +M: laforge@openezx.org +L: openezx-devel@lists.openezx.org (subscribers-only) +W: http://www.openezx.org/ +S: Maintained + ARM/GLOMATION GESBC9312SX MACHINE SUPPORT P: Lennert Buytenhek M: kernel@wantstofly.org @@ -575,10 +589,18 @@ L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) S: Maintained ARM/TOSA MACHINE SUPPORT +P: Dmitry Baryshkov +M: dbaryshkov@gmail.com P: Dirk Opfer M: dirk@opfer-online.de S: Maintained +ARM/PALMTX SUPPORT +P: Marek Vasut +M: marek.vasut@gmail.com +W: http://hackndev.com +S: Maintained + ARM/PLEB SUPPORT P: Peter Chubb M: pleb@gelato.unsw.edu.au @@ -1021,6 +1043,12 @@ M: fujita.tomonori@lab.ntt.co.jp L: linux-scsi@vger.kernel.org S: Supported +BT8XXGPIO DRIVER +P: Michael Buesch +M: mb@bu3sch.de +W: http://bu3sch.de/btgpio.php +S: Maintained + BTTV VIDEO4LINUX DRIVER P: Mauro Carvalho Chehab M: mchehab@infradead.org @@ -1962,7 +1990,7 @@ P: Carlos Corbacho M: carlos@strangeworlds.co.uk S: Odd Fixes -HPET: High Precision Event Timers driver (hpet.c) +HPET: High Precision Event Timers driver (drivers/char/hpet.c) P: Clemens Ladisch M: clemens@ladisch.de S: Maintained @@ -2915,8 +2943,6 @@ P: Faisal Latif M: flatif@neteffect.com P: Chien Tung M: ctung@neteffect.com -P: Glenn Streiff -M: gstreiff@neteffect.com L: general@lists.openfabrics.org W: http://www.neteffect.com S: Supported @@ -3097,6 +3123,12 @@ W: http://oss.oracle.com/projects/ocfs2/ T: git git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2.git S: Supported +OMFS FILESYSTEM +P: Bob Copeland +M: me@bobcopeland.com +L: linux-karma-devel@lists.sourceforge.net +S: Maintained + OMNIKEY CARDMAN 4000 DRIVER P: Harald Welte M: laforge@gnumonks.org @@ -4058,12 +4090,6 @@ W: http://www.prosec.rub.de/tpm/ L: tpmdd-devel@lists.sourceforge.net S: Maintained -TRIDENT 4DWAVE/SIS 7018 PCI AUDIO CORE -P: Muli Ben-Yehuda -M: mulix@mulix.org -L: linux-kernel@vger.kernel.org -S: Maintained - TRIVIAL PATCHES P: Jesper Juhl M: trivial@kernel.org @@ -4109,9 +4135,6 @@ W: http://www.uclinux.org/ L: uclinux-dev@uclinux.org (subscribers-only) S: Maintained -UCLINUX FOR NEC V850 -P: Miles Bader - UCLINUX FOR RENESAS H8/300 P: Yoshinori Sato M: ysato@users.sourceforge.jp diff --git a/Makefile b/Makefile index 4bcd1cf90cb1..3cad7db5eba7 100644 --- a/Makefile +++ b/Makefile @@ -1061,6 +1061,7 @@ modules: $(vmlinux-dirs) $(if $(KBUILD_BUILTIN),vmlinux) $(Q)$(AWK) '!x[$$0]++' $(vmlinux-dirs:%=$(objtree)/%/modules.order) > $(objtree)/modules.order @echo ' Building modules, stage 2.'; $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost + $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.fwinst obj=firmware __fw_modbuild # Target to prepare building external modules diff --git a/arch/Kconfig b/arch/Kconfig index ad89a33d8c6e..364c6dadde0a 100644 --- a/arch/Kconfig +++ b/arch/Kconfig @@ -27,18 +27,65 @@ config KPROBES for kernel debugging, non-intrusive instrumentation and testing. If in doubt, say "N". +config HAVE_EFFICIENT_UNALIGNED_ACCESS + def_bool n + help + Some architectures are unable to perform unaligned accesses + without the use of get_unaligned/put_unaligned. Others are + unable to perform such accesses efficiently (e.g. trap on + unaligned access and require fixing it up in the exception + handler.) + + This symbol should be selected by an architecture if it can + perform unaligned accesses efficiently to allow different + code paths to be selected for these cases. Some network + drivers, for example, could opt to not fix up alignment + problems with received packets if doing so would not help + much. + + See Documentation/unaligned-memory-access.txt for more + information on the topic of unaligned memory accesses. + config KRETPROBES def_bool y depends on KPROBES && HAVE_KRETPROBES +config HAVE_IOREMAP_PROT + def_bool n + config HAVE_KPROBES def_bool n config HAVE_KRETPROBES def_bool n +# +# An arch should select this if it provides all these things: +# +# task_pt_regs() in asm/processor.h or asm/ptrace.h +# arch_has_single_step() if there is hardware single-step support +# arch_has_block_step() if there is hardware block-step support +# arch_ptrace() and not #define __ARCH_SYS_PTRACE +# compat_arch_ptrace() and #define __ARCH_WANT_COMPAT_SYS_PTRACE +# asm/syscall.h supplying asm-generic/syscall.h interface +# linux/regset.h user_regset interfaces +# CORE_DUMP_USE_REGSET #define'd in linux/elf.h +# TIF_SYSCALL_TRACE calls tracehook_report_syscall_{entry,exit} +# TIF_NOTIFY_RESUME calls tracehook_notify_resume() +# signal delivery calls tracehook_signal_handler() +# +config HAVE_ARCH_TRACEHOOK + def_bool n + config HAVE_DMA_ATTRS def_bool n config USE_GENERIC_SMP_HELPERS def_bool n + +config HAVE_CLK + def_bool n + help + The calls support software clock gating and + thus are a key power management tool on many systems. + diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig index dbe8c280fea9..1bec55d63ef6 100644 --- a/arch/alpha/Kconfig +++ b/arch/alpha/Kconfig @@ -333,11 +333,6 @@ config PCI_SYSCALL config IOMMU_HELPER def_bool PCI -config ALPHA_CORE_AGP - bool - depends on ALPHA_GENERIC || ALPHA_TITAN || ALPHA_MARVEL - default y - config ALPHA_NONAME bool depends on ALPHA_BOOK1 || ALPHA_NONAME_CH diff --git a/arch/alpha/boot/misc.c b/arch/alpha/boot/misc.c index c00646b25f6e..3047a1b3a517 100644 --- a/arch/alpha/boot/misc.c +++ b/arch/alpha/boot/misc.c @@ -78,8 +78,6 @@ static unsigned outcnt; /* bytes in output buffer */ static int fill_inbuf(void); static void flush_window(void); static void error(char *m); -static void gzip_mark(void **); -static void gzip_release(void **); static char *input_data; static int input_data_size; @@ -88,51 +86,18 @@ static uch *output_data; static ulg output_ptr; static ulg bytes_out; -static void *malloc(int size); -static void free(void *where); static void error(char *m); static void gzip_mark(void **); static void gzip_release(void **); extern int end; static ulg free_mem_ptr; -static ulg free_mem_ptr_end; +static ulg free_mem_end_ptr; #define HEAP_SIZE 0x3000 #include "../../../lib/inflate.c" -static void *malloc(int size) -{ - void *p; - - if (size <0) error("Malloc error"); - if (free_mem_ptr <= 0) error("Memory error"); - - free_mem_ptr = (free_mem_ptr + 3) & ~3; /* Align */ - - p = (void *)free_mem_ptr; - free_mem_ptr += size; - - if (free_mem_ptr >= free_mem_ptr_end) - error("Out of memory"); - return p; -} - -static void free(void *where) -{ /* gzip_mark & gzip_release do the free */ -} - -static void gzip_mark(void **ptr) -{ - *ptr = (void *) free_mem_ptr; -} - -static void gzip_release(void **ptr) -{ - free_mem_ptr = (long) *ptr; -} - /* =========================================================================== * Fill the input buffer. This is called only when the buffer is empty * and at least one byte is really needed. @@ -193,7 +158,7 @@ decompress_kernel(void *output_start, /* FIXME FIXME FIXME */ free_mem_ptr = (ulg)output_start + ksize; - free_mem_ptr_end = (ulg)output_start + ksize + 0x200000; + free_mem_end_ptr = (ulg)output_start + ksize + 0x200000; /* FIXME FIXME FIXME */ /* put in temp area to reduce initial footprint */ diff --git a/arch/alpha/kernel/osf_sys.c b/arch/alpha/kernel/osf_sys.c index 32ca1b927307..6e943135f0e0 100644 --- a/arch/alpha/kernel/osf_sys.c +++ b/arch/alpha/kernel/osf_sys.c @@ -253,15 +253,15 @@ do_osf_statfs(struct dentry * dentry, struct osf_statfs __user *buffer, } asmlinkage int -osf_statfs(char __user *path, struct osf_statfs __user *buffer, unsigned long bufsiz) +osf_statfs(char __user *pathname, struct osf_statfs __user *buffer, unsigned long bufsiz) { - struct nameidata nd; + struct path path; int retval; - retval = user_path_walk(path, &nd); + retval = user_path(pathname, &path); if (!retval) { - retval = do_osf_statfs(nd.path.dentry, buffer, bufsiz); - path_put(&nd.path); + retval = do_osf_statfs(path.dentry, buffer, bufsiz); + path_put(&path); } return retval; } diff --git a/arch/alpha/mm/init.c b/arch/alpha/mm/init.c index 40c15e7301de..234e42b8ee74 100644 --- a/arch/alpha/mm/init.c +++ b/arch/alpha/mm/init.c @@ -94,36 +94,6 @@ __bad_page(void) return pte_mkdirty(mk_pte(virt_to_page(EMPTY_PGE), PAGE_SHARED)); } -#ifndef CONFIG_DISCONTIGMEM -void -show_mem(void) -{ - long i,free = 0,total = 0,reserved = 0; - long shared = 0, cached = 0; - - printk("\nMem-info:\n"); - show_free_areas(); - printk("Free swap: %6ldkB\n", nr_swap_pages<<(PAGE_SHIFT-10)); - i = max_mapnr; - while (i-- > 0) { - total++; - if (PageReserved(mem_map+i)) - reserved++; - else if (PageSwapCache(mem_map+i)) - cached++; - else if (!page_count(mem_map+i)) - free++; - else - shared += page_count(mem_map + i) - 1; - } - printk("%ld pages of RAM\n",total); - printk("%ld free pages\n",free); - printk("%ld reserved pages\n",reserved); - printk("%ld pages shared\n",shared); - printk("%ld pages swap cached\n",cached); -} -#endif - static inline unsigned long load_PCB(struct pcb_struct *pcb) { diff --git a/arch/alpha/mm/numa.c b/arch/alpha/mm/numa.c index 10ab7833e83c..a13de49d1265 100644 --- a/arch/alpha/mm/numa.c +++ b/arch/alpha/mm/numa.c @@ -19,7 +19,6 @@ #include pg_data_t node_data[MAX_NUMNODES]; -bootmem_data_t node_bdata[MAX_NUMNODES]; EXPORT_SYMBOL(node_data); #undef DEBUG_DISCONTIG @@ -141,7 +140,7 @@ setup_memory_node(int nid, void *kernel_end) printk(" not enough mem to reserve NODE_DATA"); return; } - NODE_DATA(nid)->bdata = &node_bdata[nid]; + NODE_DATA(nid)->bdata = &bootmem_node_data[nid]; printk(" Detected node memory: start %8lu, end %8lu\n", node_min_pfn, node_max_pfn); @@ -304,8 +303,9 @@ void __init paging_init(void) dma_local_pfn = virt_to_phys((char *)MAX_DMA_ADDRESS) >> PAGE_SHIFT; for_each_online_node(nid) { - unsigned long start_pfn = node_bdata[nid].node_boot_start >> PAGE_SHIFT; - unsigned long end_pfn = node_bdata[nid].node_low_pfn; + bootmem_data_t *bdata = &bootmem_node_data[nid]; + unsigned long start_pfn = bdata->node_min_pfn; + unsigned long end_pfn = bdata->node_low_pfn; if (dma_local_pfn >= end_pfn - start_pfn) zones_size[ZONE_DMA] = end_pfn - start_pfn; @@ -313,7 +313,7 @@ void __init paging_init(void) zones_size[ZONE_DMA] = dma_local_pfn; zones_size[ZONE_NORMAL] = (end_pfn - start_pfn) - dma_local_pfn; } - free_area_init_node(nid, NODE_DATA(nid), zones_size, start_pfn, NULL); + free_area_init_node(nid, zones_size, start_pfn, NULL); } /* Initialize the kernel's ZERO_PGE. */ @@ -359,38 +359,3 @@ void __init mem_init(void) mem_stress(); #endif } - -void -show_mem(void) -{ - long i,free = 0,total = 0,reserved = 0; - long shared = 0, cached = 0; - int nid; - - printk("\nMem-info:\n"); - show_free_areas(); - printk("Free swap: %6ldkB\n", nr_swap_pages<<(PAGE_SHIFT-10)); - for_each_online_node(nid) { - unsigned long flags; - pgdat_resize_lock(NODE_DATA(nid), &flags); - i = node_spanned_pages(nid); - while (i-- > 0) { - struct page *page = nid_page_nr(nid, i); - total++; - if (PageReserved(page)) - reserved++; - else if (PageSwapCache(page)) - cached++; - else if (!page_count(page)) - free++; - else - shared += page_count(page) - 1; - } - pgdat_resize_unlock(NODE_DATA(nid), &flags); - } - printk("%ld pages of RAM\n",total); - printk("%ld free pages\n",free); - printk("%ld reserved pages\n",reserved); - printk("%ld pages shared\n",shared); - printk("%ld pages swap cached\n",cached); -} diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index c7ad324ddf2c..dabb015aa40b 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -12,6 +12,7 @@ config ARM select RTC_LIB select SYS_SUPPORTS_APM_EMULATION select HAVE_OPROFILE + select HAVE_ARCH_KGDB select HAVE_KPROBES if (!XIP_KERNEL) select HAVE_KRETPROBES if (HAVE_KPROBES) select HAVE_FTRACE if (!XIP_KERNEL) @@ -197,12 +198,14 @@ choice config ARCH_AAEC2000 bool "Agilent AAEC-2000 based" select ARM_AMBA + select HAVE_CLK help This enables support for systems based on the Agilent AAEC-2000 config ARCH_INTEGRATOR bool "ARM Ltd. Integrator family" select ARM_AMBA + select HAVE_CLK select ICST525 help Support for ARM's Integrator platform. @@ -210,6 +213,7 @@ config ARCH_INTEGRATOR config ARCH_REALVIEW bool "ARM Ltd. RealView family" select ARM_AMBA + select HAVE_CLK select ICST307 select GENERIC_TIME select GENERIC_CLOCKEVENTS @@ -220,6 +224,7 @@ config ARCH_VERSATILE bool "ARM Ltd. Versatile family" select ARM_AMBA select ARM_VIC + select HAVE_CLK select ICST307 select GENERIC_TIME select GENERIC_CLOCKEVENTS @@ -261,7 +266,9 @@ config ARCH_EP93XX select ARM_AMBA select ARM_VIC select GENERIC_GPIO - select HAVE_GPIO_LIB + select HAVE_CLK + select HAVE_CLK + select ARCH_REQUIRE_GPIOLIB help This enables support for the Cirrus EP93xx series of CPUs. @@ -380,6 +387,7 @@ config ARCH_NS9XXX select GENERIC_GPIO select GENERIC_TIME select GENERIC_CLOCKEVENTS + select HAVE_CLK help Say Y here if you intend to run this kernel on a NetSilicon NS9xxx System. @@ -429,6 +437,7 @@ config ARCH_ORION5X config ARCH_PNX4008 bool "Philips Nexperia PNX4008 Mobile" + select HAVE_CLK help This enables support for Philips PNX4008 mobile platform. @@ -437,7 +446,8 @@ config ARCH_PXA depends on MMU select ARCH_MTD_XIP select GENERIC_GPIO - select HAVE_GPIO_LIB + select HAVE_CLK + select ARCH_REQUIRE_GPIOLIB select GENERIC_TIME select GENERIC_CLOCKEVENTS select TICK_ONESHOT @@ -467,14 +477,16 @@ config ARCH_SA1100 select GENERIC_GPIO select GENERIC_TIME select GENERIC_CLOCKEVENTS + select HAVE_CLK select TICK_ONESHOT - select HAVE_GPIO_LIB + select ARCH_REQUIRE_GPIOLIB help Support for StrongARM 11x0 based boards. config ARCH_S3C2410 bool "Samsung S3C2410, S3C2412, S3C2413, S3C2440, S3C2442, S3C2443" select GENERIC_GPIO + select HAVE_CLK help Samsung S3C2410X CPU based systems, such as the Simtec Electronics BAST (), the IPAQ 1940 or @@ -502,13 +514,15 @@ config ARCH_DAVINCI select GENERIC_TIME select GENERIC_CLOCKEVENTS select GENERIC_GPIO + select HAVE_CLK help Support for TI's DaVinci platform. config ARCH_OMAP bool "TI OMAP" select GENERIC_GPIO - select HAVE_GPIO_LIB + select HAVE_CLK + select ARCH_REQUIRE_GPIOLIB select GENERIC_TIME select GENERIC_CLOCKEVENTS help diff --git a/arch/arm/boot/compressed/misc.c b/arch/arm/boot/compressed/misc.c index 9b444022cb9b..7145cc7c04f0 100644 --- a/arch/arm/boot/compressed/misc.c +++ b/arch/arm/boot/compressed/misc.c @@ -217,8 +217,6 @@ static unsigned outcnt; /* bytes in output buffer */ static int fill_inbuf(void); static void flush_window(void); static void error(char *m); -static void gzip_mark(void **); -static void gzip_release(void **); extern char input_data[]; extern char input_data_end[]; @@ -227,65 +225,22 @@ static uch *output_data; static ulg output_ptr; static ulg bytes_out; -static void *malloc(int size); -static void free(void *where); static void error(char *m); -static void gzip_mark(void **); -static void gzip_release(void **); static void putstr(const char *); extern int end; static ulg free_mem_ptr; -static ulg free_mem_ptr_end; +static ulg free_mem_end_ptr; -#define HEAP_SIZE 0x3000 +#ifdef STANDALONE_DEBUG +#define NO_INFLATE_MALLOC +#endif + +#define ARCH_HAS_DECOMP_WDOG #include "../../../../lib/inflate.c" -#ifndef STANDALONE_DEBUG -static void *malloc(int size) -{ - void *p; - - if (size <0) error("Malloc error"); - if (free_mem_ptr <= 0) error("Memory error"); - - free_mem_ptr = (free_mem_ptr + 3) & ~3; /* Align */ - - p = (void *)free_mem_ptr; - free_mem_ptr += size; - - if (free_mem_ptr >= free_mem_ptr_end) - error("Out of memory"); - return p; -} - -static void free(void *where) -{ /* gzip_mark & gzip_release do the free */ -} - -static void gzip_mark(void **ptr) -{ - arch_decomp_wdog(); - *ptr = (void *) free_mem_ptr; -} - -static void gzip_release(void **ptr) -{ - arch_decomp_wdog(); - free_mem_ptr = (long) *ptr; -} -#else -static void gzip_mark(void **ptr) -{ -} - -static void gzip_release(void **ptr) -{ -} -#endif - /* =========================================================================== * Fill the input buffer. This is called only when the buffer is empty * and at least one byte is really needed. @@ -348,7 +303,7 @@ decompress_kernel(ulg output_start, ulg free_mem_ptr_p, ulg free_mem_ptr_end_p, { output_data = (uch *)output_start; /* Points to kernel start */ free_mem_ptr = free_mem_ptr_p; - free_mem_ptr_end = free_mem_ptr_end_p; + free_mem_end_ptr = free_mem_ptr_end_p; __machine_arch_type = arch_id; arch_decomp_setup(); diff --git a/arch/arm/common/dmabounce.c b/arch/arm/common/dmabounce.c index dd2947342604..69130f365904 100644 --- a/arch/arm/common/dmabounce.c +++ b/arch/arm/common/dmabounce.c @@ -280,7 +280,7 @@ unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size, /* * Trying to unmap an invalid mapping */ - if (dma_mapping_error(dma_addr)) { + if (dma_mapping_error(dev, dma_addr)) { dev_err(dev, "Trying to unmap invalid mapping\n"); return; } diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c index c8e8f0ea59e1..0a8e1ff2af8a 100644 --- a/arch/arm/common/sa1111.c +++ b/arch/arm/common/sa1111.c @@ -627,7 +627,7 @@ __sa1111_probe(struct device *me, struct resource *mem, int irq) if (!sachip) return -ENOMEM; - sachip->clk = clk_get(me, "GPIO27_CLK"); + sachip->clk = clk_get(me, "SA1111_CLK"); if (!sachip->clk) { ret = PTR_ERR(sachip->clk); goto err_free; diff --git a/arch/arm/configs/ezx_defconfig b/arch/arm/configs/ezx_defconfig new file mode 100644 index 000000000000..2a84d557adc2 --- /dev/null +++ b/arch/arm/configs/ezx_defconfig @@ -0,0 +1,1614 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.26-rc3 +# Mon Jul 7 17:52:21 2008 +# +CONFIG_ARM=y +CONFIG_HAVE_PWM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_MMU=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ARCH_SUPPORTS_AOUT=y +CONFIG_ZONE_DMA=y +CONFIG_ARCH_MTD_XIP=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="-ezxdev" +# CONFIG_LOCALVERSION_AUTO is not set +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +# CONFIG_BLK_DEV_INITRD is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +# CONFIG_COMPAT_BRK is not set +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_MODVERSIONS=y +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +CONFIG_IOSCHED_DEADLINE=y +# CONFIG_IOSCHED_CFQ is not set +# CONFIG_DEFAULT_AS is not set +CONFIG_DEFAULT_DEADLINE=y +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="deadline" +CONFIG_CLASSIC_RCU=y + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_PNX4008 is not set +CONFIG_ARCH_PXA=y +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_MSM7X00A is not set + +# +# Intel PXA2xx/PXA3xx Implementations +# +# CONFIG_ARCH_GUMSTIX is not set +# CONFIG_ARCH_LUBBOCK is not set +# CONFIG_MACH_LOGICPD_PXA270 is not set +# CONFIG_MACH_MAINSTONE is not set +# CONFIG_ARCH_PXA_IDP is not set +# CONFIG_PXA_SHARPSL is not set +# CONFIG_ARCH_PXA_ESERIES is not set +# CONFIG_MACH_TRIZEPS4 is not set +# CONFIG_MACH_EM_X270 is not set +# CONFIG_MACH_COLIBRI is not set +# CONFIG_MACH_ZYLONITE is not set +# CONFIG_MACH_LITTLETON is not set +# CONFIG_MACH_ARMCORE is not set +# CONFIG_MACH_MAGICIAN is not set +# CONFIG_MACH_PCM027 is not set +CONFIG_PXA_EZX=y +CONFIG_MACH_EZX_A780=y +CONFIG_MACH_EZX_E680=y +CONFIG_MACH_EZX_A1200=y +CONFIG_MACH_EZX_A910=y +CONFIG_MACH_EZX_E6=y +CONFIG_MACH_EZX_E2=y +CONFIG_PXA27x=y +CONFIG_PXA_SSP=y +CONFIG_PXA_PWM=y + +# +# Boot options +# + +# +# Power management +# + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_XSCALE=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5T=y +CONFIG_CPU_PABRT_NOIFAR=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_OUTER_CACHE is not set +CONFIG_IWMMXT=y +CONFIG_XSCALE_PMU=y + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +CONFIG_TICK_ONESHOT=y +# CONFIG_NO_HZ is not set +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_PREEMPT=y +CONFIG_HZ=100 +CONFIG_AEABI=y +CONFIG_OABI_COMPAT=y +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="console=tty1 root=/dev/mmcblk0p2 rootfstype=ext2 rootdelay=1 ip=192.168.0.202:192.168.0.200:192.168.0.200:255.255.255.0 debug" +# CONFIG_XIP_KERNEL is not set +CONFIG_KEXEC=y +CONFIG_ATAGS_PROC=y + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +CONFIG_BINFMT_AOUT=m +CONFIG_BINFMT_MISC=m + +# +# Power management options +# +CONFIG_PM=y +# CONFIG_PM_DEBUG is not set +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND=y +CONFIG_SUSPEND_FREEZER=y +CONFIG_APM_EMULATION=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +CONFIG_INET_TUNNEL=m +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +# CONFIG_INET_DIAG is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IP_VS is not set +CONFIG_IPV6=m +# CONFIG_IPV6_PRIVACY is not set +# CONFIG_IPV6_ROUTER_PREF is not set +# CONFIG_IPV6_OPTIMISTIC_DAD is not set +CONFIG_INET6_AH=m +CONFIG_INET6_ESP=m +CONFIG_INET6_IPCOMP=m +CONFIG_IPV6_MIP6=m +CONFIG_INET6_XFRM_TUNNEL=m +CONFIG_INET6_TUNNEL=m +CONFIG_INET6_XFRM_MODE_TRANSPORT=m +CONFIG_INET6_XFRM_MODE_TUNNEL=m +CONFIG_INET6_XFRM_MODE_BEET=m +# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set +CONFIG_IPV6_SIT=m +CONFIG_IPV6_NDISC_NODETYPE=y +CONFIG_IPV6_TUNNEL=m +CONFIG_IPV6_MULTIPLE_TABLES=y +CONFIG_IPV6_SUBTREES=y +# CONFIG_IPV6_MROUTE is not set +# CONFIG_NETWORK_SECMARK is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set +CONFIG_NETFILTER_ADVANCED=y +CONFIG_BRIDGE_NETFILTER=y + +# +# Core Netfilter Configuration +# +CONFIG_NETFILTER_NETLINK=m +CONFIG_NETFILTER_NETLINK_QUEUE=m +CONFIG_NETFILTER_NETLINK_LOG=m +CONFIG_NF_CONNTRACK=m +CONFIG_NF_CT_ACCT=y +CONFIG_NF_CONNTRACK_MARK=y +CONFIG_NF_CONNTRACK_EVENTS=y +# CONFIG_NF_CT_PROTO_DCCP is not set +CONFIG_NF_CT_PROTO_GRE=m +CONFIG_NF_CT_PROTO_SCTP=m +CONFIG_NF_CT_PROTO_UDPLITE=m +CONFIG_NF_CONNTRACK_AMANDA=m +CONFIG_NF_CONNTRACK_FTP=m +CONFIG_NF_CONNTRACK_H323=m +CONFIG_NF_CONNTRACK_IRC=m +CONFIG_NF_CONNTRACK_NETBIOS_NS=m +CONFIG_NF_CONNTRACK_PPTP=m +CONFIG_NF_CONNTRACK_SANE=m +CONFIG_NF_CONNTRACK_SIP=m +CONFIG_NF_CONNTRACK_TFTP=m +CONFIG_NF_CT_NETLINK=m +CONFIG_NETFILTER_XTABLES=m +CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m +# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set +# CONFIG_NETFILTER_XT_TARGET_DSCP is not set +CONFIG_NETFILTER_XT_TARGET_MARK=m +CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +CONFIG_NETFILTER_XT_TARGET_NFLOG=m +# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set +# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set +# CONFIG_NETFILTER_XT_TARGET_TRACE is not set +CONFIG_NETFILTER_XT_TARGET_TCPMSS=m +# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set +CONFIG_NETFILTER_XT_MATCH_COMMENT=m +CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m +CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m +CONFIG_NETFILTER_XT_MATCH_CONNMARK=m +CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m +CONFIG_NETFILTER_XT_MATCH_DCCP=m +CONFIG_NETFILTER_XT_MATCH_DSCP=m +CONFIG_NETFILTER_XT_MATCH_ESP=m +CONFIG_NETFILTER_XT_MATCH_HELPER=m +# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set +CONFIG_NETFILTER_XT_MATCH_LENGTH=m +CONFIG_NETFILTER_XT_MATCH_LIMIT=m +CONFIG_NETFILTER_XT_MATCH_MAC=m +CONFIG_NETFILTER_XT_MATCH_MARK=m +# CONFIG_NETFILTER_XT_MATCH_OWNER is not set +CONFIG_NETFILTER_XT_MATCH_POLICY=m +CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m +# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set +CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m +CONFIG_NETFILTER_XT_MATCH_QUOTA=m +# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set +CONFIG_NETFILTER_XT_MATCH_REALM=m +CONFIG_NETFILTER_XT_MATCH_SCTP=m +CONFIG_NETFILTER_XT_MATCH_STATE=m +CONFIG_NETFILTER_XT_MATCH_STATISTIC=m +CONFIG_NETFILTER_XT_MATCH_STRING=m +CONFIG_NETFILTER_XT_MATCH_TCPMSS=m +CONFIG_NETFILTER_XT_MATCH_TIME=m +CONFIG_NETFILTER_XT_MATCH_U32=m +CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m + +# +# IP: Netfilter Configuration +# +CONFIG_NF_CONNTRACK_IPV4=m +CONFIG_NF_CONNTRACK_PROC_COMPAT=y +CONFIG_IP_NF_QUEUE=m +CONFIG_IP_NF_IPTABLES=m +CONFIG_IP_NF_MATCH_RECENT=m +CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_AH=m +CONFIG_IP_NF_MATCH_TTL=m +CONFIG_IP_NF_MATCH_ADDRTYPE=m +CONFIG_IP_NF_FILTER=m +CONFIG_IP_NF_TARGET_REJECT=m +CONFIG_IP_NF_TARGET_LOG=m +CONFIG_IP_NF_TARGET_ULOG=m +CONFIG_NF_NAT=m +CONFIG_NF_NAT_NEEDED=y +CONFIG_IP_NF_TARGET_MASQUERADE=m +CONFIG_IP_NF_TARGET_REDIRECT=m +CONFIG_IP_NF_TARGET_NETMAP=m +CONFIG_NF_NAT_SNMP_BASIC=m +CONFIG_NF_NAT_PROTO_GRE=m +CONFIG_NF_NAT_PROTO_UDPLITE=m +CONFIG_NF_NAT_PROTO_SCTP=m +CONFIG_NF_NAT_FTP=m +CONFIG_NF_NAT_IRC=m +CONFIG_NF_NAT_TFTP=m +CONFIG_NF_NAT_AMANDA=m +CONFIG_NF_NAT_PPTP=m +CONFIG_NF_NAT_H323=m +CONFIG_NF_NAT_SIP=m +CONFIG_IP_NF_MANGLE=m +CONFIG_IP_NF_TARGET_ECN=m +CONFIG_IP_NF_TARGET_TTL=m +CONFIG_IP_NF_TARGET_CLUSTERIP=m +CONFIG_IP_NF_RAW=m +CONFIG_IP_NF_ARPTABLES=m +CONFIG_IP_NF_ARPFILTER=m +CONFIG_IP_NF_ARP_MANGLE=m + +# +# IPv6: Netfilter Configuration +# +CONFIG_NF_CONNTRACK_IPV6=m +CONFIG_IP6_NF_QUEUE=m +CONFIG_IP6_NF_IPTABLES=m +CONFIG_IP6_NF_MATCH_RT=m +CONFIG_IP6_NF_MATCH_OPTS=m +CONFIG_IP6_NF_MATCH_FRAG=m +CONFIG_IP6_NF_MATCH_HL=m +CONFIG_IP6_NF_MATCH_IPV6HEADER=m +CONFIG_IP6_NF_MATCH_AH=m +CONFIG_IP6_NF_MATCH_MH=m +CONFIG_IP6_NF_MATCH_EUI64=m +CONFIG_IP6_NF_FILTER=m +CONFIG_IP6_NF_TARGET_LOG=m +CONFIG_IP6_NF_TARGET_REJECT=m +CONFIG_IP6_NF_MANGLE=m +CONFIG_IP6_NF_TARGET_HL=m +CONFIG_IP6_NF_RAW=m + +# +# Bridge: Netfilter Configuration +# +# CONFIG_BRIDGE_NF_EBTABLES is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +CONFIG_BRIDGE=m +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +CONFIG_LLC=m +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set +CONFIG_NET_CLS_ROUTE=y +CONFIG_NET_SCH_FIFO=y + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +CONFIG_BT=y +CONFIG_BT_L2CAP=m +CONFIG_BT_SCO=y +CONFIG_BT_RFCOMM=m +CONFIG_BT_RFCOMM_TTY=y +CONFIG_BT_BNEP=m +CONFIG_BT_BNEP_MC_FILTER=y +CONFIG_BT_BNEP_PROTO_FILTER=y +CONFIG_BT_HIDP=m + +# +# Bluetooth device drivers +# +# CONFIG_BT_HCIUSB is not set +# CONFIG_BT_HCIBTUSB is not set +# CONFIG_BT_HCIBTSDIO is not set +CONFIG_BT_HCIUART=y +CONFIG_BT_HCIUART_H4=y +# CONFIG_BT_HCIUART_BCSP is not set +# CONFIG_BT_HCIUART_LL is not set +# CONFIG_BT_HCIBCM203X is not set +# CONFIG_BT_HCIBPA10X is not set +# CONFIG_BT_HCIBFUSB is not set +# CONFIG_BT_HCIVHCI is not set +# CONFIG_AF_RXRPC is not set +CONFIG_FIB_RULES=y + +# +# Wireless +# +CONFIG_CFG80211=m +CONFIG_NL80211=y +CONFIG_WIRELESS_EXT=y +CONFIG_MAC80211=m + +# +# Rate control algorithm selection +# +CONFIG_MAC80211_RC_DEFAULT_PID=y +# CONFIG_MAC80211_RC_DEFAULT_NONE is not set + +# +# Selecting 'y' for an algorithm will +# + +# +# build the algorithm into mac80211. +# +CONFIG_MAC80211_RC_DEFAULT="pid" +CONFIG_MAC80211_RC_PID=y +# CONFIG_MAC80211_MESH is not set +CONFIG_MAC80211_LEDS=y +# CONFIG_MAC80211_DEBUG_PACKET_ALIGNMENT is not set +# CONFIG_MAC80211_DEBUG is not set +CONFIG_IEEE80211=m +# CONFIG_IEEE80211_DEBUG is not set +CONFIG_IEEE80211_CRYPT_WEP=m +CONFIG_IEEE80211_CRYPT_CCMP=m +CONFIG_IEEE80211_CRYPT_TKIP=m +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=m +# CONFIG_SYS_HYPERVISOR is not set +CONFIG_CONNECTOR=m +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AFS_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +# CONFIG_MTD_BLKDEVS is not set +# CONFIG_MTD_BLOCK is not set +# CONFIG_MTD_BLOCK_RO is not set +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +CONFIG_MTD_CFI_ADV_OPTIONS=y +CONFIG_MTD_CFI_NOSWAP=y +# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set +# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set +CONFIG_MTD_CFI_GEOMETRY=y +# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set +CONFIG_MTD_MAP_BANK_WIDTH_2=y +# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +# CONFIG_MTD_CFI_I2 is not set +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_OTP is not set +CONFIG_MTD_CFI_INTELEXT=y +# CONFIG_MTD_CFI_AMDSTD is not set +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set +CONFIG_MTD_XIP=y + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_START=0x0 +CONFIG_MTD_PHYSMAP_LEN=0x0 +CONFIG_MTD_PHYSMAP_BANKWIDTH=2 +# CONFIG_MTD_PXA2XX is not set +# CONFIG_MTD_ARM_INTEGRATOR is not set +# CONFIG_MTD_SHARP_SL is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=m +CONFIG_BLK_DEV_CRYPTOLOOP=m +CONFIG_BLK_DEV_NBD=m +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=m +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +CONFIG_DUMMY=y +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_NET_ETHERNET is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +# CONFIG_WAN is not set +CONFIG_PPP=m +CONFIG_PPP_MULTILINK=y +CONFIG_PPP_FILTER=y +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_BSDCOMP=m +# CONFIG_PPP_MPPE is not set +# CONFIG_PPPOE is not set +# CONFIG_PPPOL2TP is not set +# CONFIG_SLIP is not set +CONFIG_SLHC=m +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set +# CONFIG_INPUT_APMPOWER is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +CONFIG_KEYBOARD_PXA27x=y +CONFIG_KEYBOARD_GPIO=y +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +CONFIG_INPUT_TOUCHSCREEN=y +# CONFIG_TOUCHSCREEN_ADS7846 is not set +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_UCB1400 is not set +# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set +CONFIG_TOUCHSCREEN_PCAP=y +CONFIG_INPUT_MISC=y +# CONFIG_INPUT_ATI_REMOTE is not set +# CONFIG_INPUT_ATI_REMOTE2 is not set +# CONFIG_INPUT_KEYSPAN_REMOTE is not set +# CONFIG_INPUT_POWERMATE is not set +# CONFIG_INPUT_YEALINK is not set +CONFIG_INPUT_UINPUT=y + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_PXA=y +CONFIG_SERIAL_PXA_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=8 +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=y +# CONFIG_NVRAM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_GPIO is not set +CONFIG_I2C_PXA=y +# CONFIG_I2C_PXA_SLAVE is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_TINY_USB is not set +# CONFIG_I2C_PCA_PLATFORM is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_TPS65010 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +CONFIG_SPI=y +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +# CONFIG_SPI_BITBANG is not set +CONFIG_SPI_PXA2XX=m + +# +# SPI Protocol Masters +# +# CONFIG_SPI_AT25 is not set +# CONFIG_SPI_SPIDEV is not set +# CONFIG_SPI_TLE62X0 is not set +CONFIG_HAVE_GPIO_LIB=y + +# +# GPIO Support +# + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set + +# +# SPI GPIO expanders: +# +# CONFIG_GPIO_MCP23S08 is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_WATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TC6393XB is not set +CONFIG_EZX_PCAP=y + +# +# Multimedia devices +# + +# +# Multimedia core support +# +CONFIG_VIDEO_DEV=m +CONFIG_VIDEO_V4L2_COMMON=m +CONFIG_VIDEO_ALLOW_V4L1=y +CONFIG_VIDEO_V4L1_COMPAT=y +# CONFIG_DVB_CORE is not set +CONFIG_VIDEO_MEDIA=m + +# +# Multimedia drivers +# +# CONFIG_MEDIA_ATTACH is not set +CONFIG_MEDIA_TUNER=m +# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set +CONFIG_MEDIA_TUNER_SIMPLE=m +CONFIG_MEDIA_TUNER_TDA8290=m +CONFIG_MEDIA_TUNER_TDA9887=m +CONFIG_MEDIA_TUNER_TEA5761=m +CONFIG_MEDIA_TUNER_TEA5767=m +CONFIG_MEDIA_TUNER_MT20XX=m +CONFIG_MEDIA_TUNER_XC2028=m +CONFIG_MEDIA_TUNER_XC5000=m +CONFIG_VIDEO_V4L2=m +CONFIG_VIDEO_V4L1=m +CONFIG_VIDEO_CAPTURE_DRIVERS=y +# CONFIG_VIDEO_ADV_DEBUG is not set +CONFIG_VIDEO_HELPER_CHIPS_AUTO=y +# CONFIG_VIDEO_VIVI is not set +# CONFIG_VIDEO_CPIA is not set +# CONFIG_VIDEO_CPIA2 is not set +# CONFIG_VIDEO_SAA5246A is not set +# CONFIG_VIDEO_SAA5249 is not set +# CONFIG_TUNER_3036 is not set +# CONFIG_V4L_USB_DRIVERS is not set +# CONFIG_SOC_CAMERA is not set +# CONFIG_VIDEO_PXA27x is not set +CONFIG_RADIO_ADAPTERS=y +# CONFIG_USB_DSBR is not set +# CONFIG_USB_SI470X is not set +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_UVESA is not set +# CONFIG_FB_S1D13XXX is not set +CONFIG_FB_PXA=y +# CONFIG_FB_PXA_SMARTPANEL is not set +CONFIG_FB_PXA_PARAMETERS=y +# CONFIG_FB_MBX is not set +# CONFIG_FB_AM200EPD is not set +# CONFIG_FB_VIRTUAL is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +# CONFIG_LCD_CLASS_DEVICE is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=y +# CONFIG_BACKLIGHT_CORGI is not set +CONFIG_BACKLIGHT_PWM=y + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +CONFIG_FONTS=y +# CONFIG_FONT_8x8 is not set +# CONFIG_FONT_8x16 is not set +# CONFIG_FONT_6x11 is not set +# CONFIG_FONT_7x14 is not set +# CONFIG_FONT_PEARL_8x8 is not set +# CONFIG_FONT_ACORN_8x8 is not set +CONFIG_FONT_MINI_4x6=y +# CONFIG_FONT_SUN8x16 is not set +# CONFIG_FONT_SUN12x22 is not set +# CONFIG_FONT_10x18 is not set +# CONFIG_LOGO is not set + +# +# Sound +# +CONFIG_SOUND=y + +# +# Advanced Linux Sound Architecture +# +CONFIG_SND=y +CONFIG_SND_TIMER=y +CONFIG_SND_PCM=y +# CONFIG_SND_SEQUENCER is not set +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=y +CONFIG_SND_PCM_OSS=y +CONFIG_SND_PCM_OSS_PLUGINS=y +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set + +# +# Generic devices +# +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set + +# +# ALSA ARM devices +# +# CONFIG_SND_PXA2XX_AC97 is not set + +# +# SPI devices +# + +# +# USB devices +# +# CONFIG_SND_USB_AUDIO is not set +# CONFIG_SND_USB_CAIAQ is not set + +# +# System on Chip audio support +# +CONFIG_SND_SOC=y +CONFIG_SND_PXA2XX_SOC=y + +# +# ALSA SoC audio for Freescale SOCs +# + +# +# SoC Audio for the Texas Instruments OMAP +# + +# +# Open Sound System +# +# CONFIG_SOUND_PRIME is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set + +# +# USB Input Devices +# +# CONFIG_USB_HID is not set + +# +# USB HID Boot Protocol drivers +# +# CONFIG_USB_KBD is not set +# CONFIG_USB_MOUSE is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set + +# +# Miscellaneous USB options +# +# CONFIG_USB_DEVICEFS is not set +# CONFIG_USB_DEVICE_CLASS is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_SUSPEND is not set +# CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MON is not set + +# +# USB port drivers +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_DEBUG_FILES is not set +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_ATMEL_USBA is not set +# CONFIG_USB_GADGET_FSL_USB2 is not set +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_PXA25X is not set +# CONFIG_USB_GADGET_M66592 is not set +CONFIG_USB_GADGET_PXA27X=y +CONFIG_USB_PXA27X=y +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_S3C2410 is not set +# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +# CONFIG_USB_GADGET_DUALSPEED is not set +# CONFIG_USB_ZERO is not set +CONFIG_USB_ETH=y +# CONFIG_USB_ETH_RNDIS is not set +# CONFIG_USB_GADGETFS is not set +# CONFIG_USB_FILE_STORAGE is not set +# CONFIG_USB_G_SERIAL is not set +# CONFIG_USB_MIDI_GADGET is not set +# CONFIG_USB_G_PRINTER is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +CONFIG_MMC_UNSAFE_RESUME=y + +# +# MMC/SD Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +CONFIG_SDIO_UART=y + +# +# MMC/SD Host Controller Drivers +# +CONFIG_MMC_PXA=y +# CONFIG_MMC_SPI is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y + +# +# LED drivers +# +# CONFIG_LEDS_GPIO is not set + +# +# LED Triggers +# +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set + +# +# SPI RTC drivers +# +# CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_R9701 is not set +# CONFIG_RTC_DRV_RS5C348 is not set + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +CONFIG_RTC_DRV_SA1100=m +# CONFIG_UIO is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=m +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=m +CONFIG_FS_MBCACHE=y +CONFIG_REISERFS_FS=m +# CONFIG_REISERFS_CHECK is not set +# CONFIG_REISERFS_PROC_INFO is not set +CONFIG_REISERFS_FS_XATTR=y +CONFIG_REISERFS_FS_POSIX_ACL=y +CONFIG_REISERFS_FS_SECURITY=y +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +CONFIG_XFS_FS=m +# CONFIG_XFS_QUOTA is not set +# CONFIG_XFS_POSIX_ACL is not set +# CONFIG_XFS_RT is not set +# CONFIG_XFS_DEBUG is not set +# CONFIG_OCFS2_FS is not set +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_AUTOFS_FS=y +CONFIG_AUTOFS4_FS=y +CONFIG_FUSE_FS=m + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=m +CONFIG_JOLIET=y +CONFIG_ZISOFS=y +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=m +CONFIG_MSDOS_FS=m +CONFIG_VFAT_FS=m +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS2_FS is not set +CONFIG_CRAMFS=m +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +CONFIG_NFS_V3_ACL=y +# CONFIG_NFS_V4 is not set +CONFIG_NFSD=m +CONFIG_NFSD_V2_ACL=y +CONFIG_NFSD_V3=y +CONFIG_NFSD_V3_ACL=y +# CONFIG_NFSD_V4 is not set +# CONFIG_ROOT_NFS is not set +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=m +CONFIG_NFS_ACL_SUPPORT=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +CONFIG_SMB_FS=m +# CONFIG_SMB_NLS_DEFAULT is not set +CONFIG_CIFS=m +CONFIG_CIFS_STATS=y +# CONFIG_CIFS_STATS2 is not set +CONFIG_CIFS_WEAK_PW_HASH=y +CONFIG_CIFS_XATTR=y +CONFIG_CIFS_POSIX=y +# CONFIG_CIFS_DEBUG2 is not set +# CONFIG_CIFS_EXPERIMENTAL is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=m +CONFIG_NLS_CODEPAGE_737=m +CONFIG_NLS_CODEPAGE_775=m +CONFIG_NLS_CODEPAGE_850=m +CONFIG_NLS_CODEPAGE_852=m +CONFIG_NLS_CODEPAGE_855=m +CONFIG_NLS_CODEPAGE_857=m +CONFIG_NLS_CODEPAGE_860=m +CONFIG_NLS_CODEPAGE_861=m +CONFIG_NLS_CODEPAGE_862=m +CONFIG_NLS_CODEPAGE_863=m +CONFIG_NLS_CODEPAGE_864=m +CONFIG_NLS_CODEPAGE_865=m +CONFIG_NLS_CODEPAGE_866=m +CONFIG_NLS_CODEPAGE_869=m +CONFIG_NLS_CODEPAGE_936=m +CONFIG_NLS_CODEPAGE_950=m +CONFIG_NLS_CODEPAGE_932=m +CONFIG_NLS_CODEPAGE_949=m +CONFIG_NLS_CODEPAGE_874=m +CONFIG_NLS_ISO8859_8=m +CONFIG_NLS_CODEPAGE_1250=m +CONFIG_NLS_CODEPAGE_1251=m +CONFIG_NLS_ASCII=m +CONFIG_NLS_ISO8859_1=m +CONFIG_NLS_ISO8859_2=m +CONFIG_NLS_ISO8859_3=m +CONFIG_NLS_ISO8859_4=m +CONFIG_NLS_ISO8859_5=m +CONFIG_NLS_ISO8859_6=m +CONFIG_NLS_ISO8859_7=m +CONFIG_NLS_ISO8859_9=m +CONFIG_NLS_ISO8859_13=m +CONFIG_NLS_ISO8859_14=m +CONFIG_NLS_ISO8859_15=m +CONFIG_NLS_KOI8_R=m +CONFIG_NLS_KOI8_U=m +CONFIG_NLS_UTF8=m +# CONFIG_DLM is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +# CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_FRAME_WARN=1024 +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_FRAME_POINTER=y +# CONFIG_SAMPLES is not set +# CONFIG_DEBUG_USER is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +CONFIG_CRYPTO_ALGAPI=m +CONFIG_CRYPTO_AEAD=m +CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_HASH=m +CONFIG_CRYPTO_MANAGER=m +CONFIG_CRYPTO_GF128MUL=m +CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_CRYPTD=m +CONFIG_CRYPTO_AUTHENC=m +CONFIG_CRYPTO_TEST=m + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=m +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=m +CONFIG_CRYPTO_LRW=m +CONFIG_CRYPTO_PCBC=m +CONFIG_CRYPTO_XTS=m + +# +# Hash modes +# +CONFIG_CRYPTO_HMAC=m +CONFIG_CRYPTO_XCBC=m + +# +# Digest +# +CONFIG_CRYPTO_CRC32C=m +CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_MD5=m +CONFIG_CRYPTO_MICHAEL_MIC=m +CONFIG_CRYPTO_SHA1=m +CONFIG_CRYPTO_SHA256=m +CONFIG_CRYPTO_SHA512=m +CONFIG_CRYPTO_TGR192=m +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +CONFIG_CRYPTO_AES=m +# CONFIG_CRYPTO_ANUBIS is not set +CONFIG_CRYPTO_ARC4=m +CONFIG_CRYPTO_BLOWFISH=m +# CONFIG_CRYPTO_CAMELLIA is not set +CONFIG_CRYPTO_CAST5=m +CONFIG_CRYPTO_CAST6=m +CONFIG_CRYPTO_DES=m +CONFIG_CRYPTO_FCRYPT=m +CONFIG_CRYPTO_KHAZAD=m +# CONFIG_CRYPTO_SALSA20 is not set +CONFIG_CRYPTO_SEED=m +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_TEA=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_TWOFISH_COMMON=m + +# +# Compression +# +CONFIG_CRYPTO_DEFLATE=m +# CONFIG_CRYPTO_LZO is not set +CONFIG_CRYPTO_HW=y + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set +# CONFIG_GENERIC_FIND_NEXT_BIT is not set +CONFIG_CRC_CCITT=m +CONFIG_CRC16=m +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +CONFIG_LIBCRC32C=m +CONFIG_ZLIB_INFLATE=m +CONFIG_ZLIB_DEFLATE=m +CONFIG_TEXTSEARCH=y +CONFIG_TEXTSEARCH_KMP=m +CONFIG_TEXTSEARCH_BM=m +CONFIG_TEXTSEARCH_FSM=m +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile index eb9092ca8008..1d296fc8494e 100644 --- a/arch/arm/kernel/Makefile +++ b/arch/arm/kernel/Makefile @@ -28,6 +28,7 @@ obj-$(CONFIG_KPROBES) += kprobes.o kprobes-decode.o obj-$(CONFIG_ATAGS_PROC) += atags.o obj-$(CONFIG_OABI_COMPAT) += sys_oabi-compat.o obj-$(CONFIG_ARM_THUMBEE) += thumbee.o +obj-$(CONFIG_KGDB) += kgdb.o obj-$(CONFIG_CRUNCH) += crunch.o crunch-bits.o AFLAGS_crunch-bits.o := -Wa,-mcpu=ep9312 diff --git a/arch/arm/kernel/kgdb.c b/arch/arm/kernel/kgdb.c new file mode 100644 index 000000000000..aaffaecffcd1 --- /dev/null +++ b/arch/arm/kernel/kgdb.c @@ -0,0 +1,201 @@ +/* + * arch/arm/kernel/kgdb.c + * + * ARM KGDB support + * + * Copyright (c) 2002-2004 MontaVista Software, Inc + * Copyright (c) 2008 Wind River Systems, Inc. + * + * Authors: George Davis + * Deepak Saxena + */ +#include +#include + +/* Make a local copy of the registers passed into the handler (bletch) */ +void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *kernel_regs) +{ + int regno; + + /* Initialize all to zero. */ + for (regno = 0; regno < GDB_MAX_REGS; regno++) + gdb_regs[regno] = 0; + + gdb_regs[_R0] = kernel_regs->ARM_r0; + gdb_regs[_R1] = kernel_regs->ARM_r1; + gdb_regs[_R2] = kernel_regs->ARM_r2; + gdb_regs[_R3] = kernel_regs->ARM_r3; + gdb_regs[_R4] = kernel_regs->ARM_r4; + gdb_regs[_R5] = kernel_regs->ARM_r5; + gdb_regs[_R6] = kernel_regs->ARM_r6; + gdb_regs[_R7] = kernel_regs->ARM_r7; + gdb_regs[_R8] = kernel_regs->ARM_r8; + gdb_regs[_R9] = kernel_regs->ARM_r9; + gdb_regs[_R10] = kernel_regs->ARM_r10; + gdb_regs[_FP] = kernel_regs->ARM_fp; + gdb_regs[_IP] = kernel_regs->ARM_ip; + gdb_regs[_SPT] = kernel_regs->ARM_sp; + gdb_regs[_LR] = kernel_regs->ARM_lr; + gdb_regs[_PC] = kernel_regs->ARM_pc; + gdb_regs[_CPSR] = kernel_regs->ARM_cpsr; +} + +/* Copy local gdb registers back to kgdb regs, for later copy to kernel */ +void gdb_regs_to_pt_regs(unsigned long *gdb_regs, struct pt_regs *kernel_regs) +{ + kernel_regs->ARM_r0 = gdb_regs[_R0]; + kernel_regs->ARM_r1 = gdb_regs[_R1]; + kernel_regs->ARM_r2 = gdb_regs[_R2]; + kernel_regs->ARM_r3 = gdb_regs[_R3]; + kernel_regs->ARM_r4 = gdb_regs[_R4]; + kernel_regs->ARM_r5 = gdb_regs[_R5]; + kernel_regs->ARM_r6 = gdb_regs[_R6]; + kernel_regs->ARM_r7 = gdb_regs[_R7]; + kernel_regs->ARM_r8 = gdb_regs[_R8]; + kernel_regs->ARM_r9 = gdb_regs[_R9]; + kernel_regs->ARM_r10 = gdb_regs[_R10]; + kernel_regs->ARM_fp = gdb_regs[_FP]; + kernel_regs->ARM_ip = gdb_regs[_IP]; + kernel_regs->ARM_sp = gdb_regs[_SPT]; + kernel_regs->ARM_lr = gdb_regs[_LR]; + kernel_regs->ARM_pc = gdb_regs[_PC]; + kernel_regs->ARM_cpsr = gdb_regs[_CPSR]; +} + +void +sleeping_thread_to_gdb_regs(unsigned long *gdb_regs, struct task_struct *task) +{ + struct pt_regs *thread_regs; + int regno; + + /* Just making sure... */ + if (task == NULL) + return; + + /* Initialize to zero */ + for (regno = 0; regno < GDB_MAX_REGS; regno++) + gdb_regs[regno] = 0; + + /* Otherwise, we have only some registers from switch_to() */ + thread_regs = task_pt_regs(task); + gdb_regs[_R0] = thread_regs->ARM_r0; + gdb_regs[_R1] = thread_regs->ARM_r1; + gdb_regs[_R2] = thread_regs->ARM_r2; + gdb_regs[_R3] = thread_regs->ARM_r3; + gdb_regs[_R4] = thread_regs->ARM_r4; + gdb_regs[_R5] = thread_regs->ARM_r5; + gdb_regs[_R6] = thread_regs->ARM_r6; + gdb_regs[_R7] = thread_regs->ARM_r7; + gdb_regs[_R8] = thread_regs->ARM_r8; + gdb_regs[_R9] = thread_regs->ARM_r9; + gdb_regs[_R10] = thread_regs->ARM_r10; + gdb_regs[_FP] = thread_regs->ARM_fp; + gdb_regs[_IP] = thread_regs->ARM_ip; + gdb_regs[_SPT] = thread_regs->ARM_sp; + gdb_regs[_LR] = thread_regs->ARM_lr; + gdb_regs[_PC] = thread_regs->ARM_pc; + gdb_regs[_CPSR] = thread_regs->ARM_cpsr; +} + +static int compiled_break; + +int kgdb_arch_handle_exception(int exception_vector, int signo, + int err_code, char *remcom_in_buffer, + char *remcom_out_buffer, + struct pt_regs *linux_regs) +{ + unsigned long addr; + char *ptr; + + switch (remcom_in_buffer[0]) { + case 'D': + case 'k': + case 'c': + kgdb_contthread = NULL; + + /* + * Try to read optional parameter, pc unchanged if no parm. + * If this was a compiled breakpoint, we need to move + * to the next instruction or we will just breakpoint + * over and over again. + */ + ptr = &remcom_in_buffer[1]; + if (kgdb_hex2long(&ptr, &addr)) + linux_regs->ARM_pc = addr; + else if (compiled_break == 1) + linux_regs->ARM_pc += 4; + + compiled_break = 0; + + return 0; + } + + return -1; +} + +static int kgdb_brk_fn(struct pt_regs *regs, unsigned int instr) +{ + kgdb_handle_exception(1, SIGTRAP, 0, regs); + + return 0; +} + +static int kgdb_compiled_brk_fn(struct pt_regs *regs, unsigned int instr) +{ + compiled_break = 1; + kgdb_handle_exception(1, SIGTRAP, 0, regs); + + return 0; +} + +static struct undef_hook kgdb_brkpt_hook = { + .instr_mask = 0xffffffff, + .instr_val = KGDB_BREAKINST, + .fn = kgdb_brk_fn +}; + +static struct undef_hook kgdb_compiled_brkpt_hook = { + .instr_mask = 0xffffffff, + .instr_val = KGDB_COMPILED_BREAK, + .fn = kgdb_compiled_brk_fn +}; + +/** + * kgdb_arch_init - Perform any architecture specific initalization. + * + * This function will handle the initalization of any architecture + * specific callbacks. + */ +int kgdb_arch_init(void) +{ + register_undef_hook(&kgdb_brkpt_hook); + register_undef_hook(&kgdb_compiled_brkpt_hook); + + return 0; +} + +/** + * kgdb_arch_exit - Perform any architecture specific uninitalization. + * + * This function will handle the uninitalization of any architecture + * specific callbacks, for dynamic registration and unregistration. + */ +void kgdb_arch_exit(void) +{ + unregister_undef_hook(&kgdb_brkpt_hook); + unregister_undef_hook(&kgdb_compiled_brkpt_hook); +} + +/* + * Register our undef instruction hooks with ARM undef core. + * We regsiter a hook specifically looking for the KGB break inst + * and we handle the normal undef case within the do_undefinstr + * handler. + */ +struct kgdb_arch arch_kgdb_ops = { +#ifndef __ARMEB__ + .gdb_bpt_instr = {0xfe, 0xde, 0xff, 0xe7} +#else /* ! __ARMEB__ */ + .gdb_bpt_instr = {0xe7, 0xff, 0xde, 0xfe} +#endif +}; diff --git a/arch/arm/kernel/kprobes.c b/arch/arm/kernel/kprobes.c index 5ee39e10c8d1..d28513f14d05 100644 --- a/arch/arm/kernel/kprobes.c +++ b/arch/arm/kernel/kprobes.c @@ -296,8 +296,7 @@ static __used __kprobes void *trampoline_handler(struct pt_regs *regs) unsigned long trampoline_address = (unsigned long)&kretprobe_trampoline; INIT_HLIST_HEAD(&empty_rp); - spin_lock_irqsave(&kretprobe_lock, flags); - head = kretprobe_inst_table_head(current); + kretprobe_hash_lock(current, &head, &flags); /* * It is possible to have multiple instances associated with a given @@ -337,7 +336,7 @@ static __used __kprobes void *trampoline_handler(struct pt_regs *regs) } kretprobe_assert(ri, orig_ret_address, trampoline_address); - spin_unlock_irqrestore(&kretprobe_lock, flags); + kretprobe_hash_unlock(current, &flags); hlist_for_each_entry_safe(ri, node, tmp, &empty_rp, hlist) { hlist_del(&ri->hlist); @@ -347,7 +346,6 @@ static __used __kprobes void *trampoline_handler(struct pt_regs *regs) return (void *)orig_ret_address; } -/* Called with kretprobe_lock held. */ void __kprobes arch_prepare_kretprobe(struct kretprobe_instance *ri, struct pt_regs *regs) { diff --git a/arch/arm/kernel/module.c b/arch/arm/kernel/module.c index 79b7e5cf5416..a68259a0cccd 100644 --- a/arch/arm/kernel/module.c +++ b/arch/arm/kernel/module.c @@ -13,6 +13,7 @@ #include #include #include +#include #include #include #include diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c index 199b3680118b..89bfded70a1f 100644 --- a/arch/arm/kernel/process.c +++ b/arch/arm/kernel/process.c @@ -162,7 +162,7 @@ void cpu_idle(void) if (!idle) idle = default_idle; leds_event(led_idle_start); - tick_nohz_stop_sched_tick(); + tick_nohz_stop_sched_tick(1); while (!need_resched()) idle(); leds_event(led_idle_end); diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index b7b0720bc1bb..38f0e7940a13 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -36,6 +36,7 @@ #include #include #include +#include #include "compat.h" #include "atags.h" @@ -853,6 +854,7 @@ void __init setup_arch(char **cmdline_p) conswitchp = &dummy_con; #endif #endif + early_trap_init(); } diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c index 5595fdd75e82..7277aef83098 100644 --- a/arch/arm/kernel/traps.c +++ b/arch/arm/kernel/traps.c @@ -707,6 +707,11 @@ void abort(void) EXPORT_SYMBOL(abort); void __init trap_init(void) +{ + return; +} + +void __init early_trap_init(void) { unsigned long vectors = CONFIG_VECTORS_BASE; extern char __stubs_start[], __stubs_end[]; diff --git a/arch/arm/mach-at91/at91cap9_devices.c b/arch/arm/mach-at91/at91cap9_devices.c index 747b9dedab88..dc8b40783d94 100644 --- a/arch/arm/mach-at91/at91cap9_devices.c +++ b/arch/arm/mach-at91/at91cap9_devices.c @@ -377,7 +377,7 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {} * -------------------------------------------------------------------- */ #if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE) -static struct at91_nand_data nand_data; +static struct atmel_nand_data nand_data; #define NAND_BASE AT91_CHIPSELECT_3 @@ -395,7 +395,7 @@ static struct resource nand_resources[] = { }; static struct platform_device at91cap9_nand_device = { - .name = "at91_nand", + .name = "atmel_nand", .id = -1, .dev = { .platform_data = &nand_data, @@ -404,7 +404,7 @@ static struct platform_device at91cap9_nand_device = { .num_resources = ARRAY_SIZE(nand_resources), }; -void __init at91_add_device_nand(struct at91_nand_data *data) +void __init at91_add_device_nand(struct atmel_nand_data *data) { unsigned long csa, mode; @@ -445,7 +445,7 @@ void __init at91_add_device_nand(struct at91_nand_data *data) platform_device_register(&at91cap9_nand_device); } #else -void __init at91_add_device_nand(struct at91_nand_data *data) {} +void __init at91_add_device_nand(struct atmel_nand_data *data) {} #endif diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c index de19bee83f75..8ced9bc82099 100644 --- a/arch/arm/mach-at91/at91rm9200_devices.c +++ b/arch/arm/mach-at91/at91rm9200_devices.c @@ -369,7 +369,7 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {} * -------------------------------------------------------------------- */ #if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE) -static struct at91_nand_data nand_data; +static struct atmel_nand_data nand_data; #define NAND_BASE AT91_CHIPSELECT_3 @@ -382,7 +382,7 @@ static struct resource nand_resources[] = { }; static struct platform_device at91rm9200_nand_device = { - .name = "at91_nand", + .name = "atmel_nand", .id = -1, .dev = { .platform_data = &nand_data, @@ -391,7 +391,7 @@ static struct platform_device at91rm9200_nand_device = { .num_resources = ARRAY_SIZE(nand_resources), }; -void __init at91_add_device_nand(struct at91_nand_data *data) +void __init at91_add_device_nand(struct atmel_nand_data *data) { unsigned int csa; @@ -429,7 +429,7 @@ void __init at91_add_device_nand(struct at91_nand_data *data) platform_device_register(&at91rm9200_nand_device); } #else -void __init at91_add_device_nand(struct at91_nand_data *data) {} +void __init at91_add_device_nand(struct atmel_nand_data *data) {} #endif diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c index 86cba4ac29b1..cae5f52f1278 100644 --- a/arch/arm/mach-at91/at91sam9260_devices.c +++ b/arch/arm/mach-at91/at91sam9260_devices.c @@ -284,7 +284,7 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {} * -------------------------------------------------------------------- */ #if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE) -static struct at91_nand_data nand_data; +static struct atmel_nand_data nand_data; #define NAND_BASE AT91_CHIPSELECT_3 @@ -302,7 +302,7 @@ static struct resource nand_resources[] = { }; static struct platform_device at91sam9260_nand_device = { - .name = "at91_nand", + .name = "atmel_nand", .id = -1, .dev = { .platform_data = &nand_data, @@ -311,7 +311,7 @@ static struct platform_device at91sam9260_nand_device = { .num_resources = ARRAY_SIZE(nand_resources), }; -void __init at91_add_device_nand(struct at91_nand_data *data) +void __init at91_add_device_nand(struct atmel_nand_data *data) { unsigned long csa, mode; @@ -373,7 +373,7 @@ void __init at91_add_device_nand(struct at91_nand_data *data) platform_device_register(&at91sam9260_nand_device); } #else -void __init at91_add_device_nand(struct at91_nand_data *data) {} +void __init at91_add_device_nand(struct atmel_nand_data *data) {} #endif diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c index ec1891375dfb..483d436af22d 100644 --- a/arch/arm/mach-at91/at91sam9261_devices.c +++ b/arch/arm/mach-at91/at91sam9261_devices.c @@ -199,7 +199,7 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {} * -------------------------------------------------------------------- */ #if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE) -static struct at91_nand_data nand_data; +static struct atmel_nand_data nand_data; #define NAND_BASE AT91_CHIPSELECT_3 @@ -211,8 +211,8 @@ static struct resource nand_resources[] = { } }; -static struct platform_device at91_nand_device = { - .name = "at91_nand", +static struct platform_device atmel_nand_device = { + .name = "atmel_nand", .id = -1, .dev = { .platform_data = &nand_data, @@ -221,7 +221,7 @@ static struct platform_device at91_nand_device = { .num_resources = ARRAY_SIZE(nand_resources), }; -void __init at91_add_device_nand(struct at91_nand_data *data) +void __init at91_add_device_nand(struct atmel_nand_data *data) { unsigned long csa, mode; @@ -262,11 +262,11 @@ void __init at91_add_device_nand(struct at91_nand_data *data) at91_set_A_periph(AT91_PIN_PC1, 0); /* NANDWE */ nand_data = *data; - platform_device_register(&at91_nand_device); + platform_device_register(&atmel_nand_device); } #else -void __init at91_add_device_nand(struct at91_nand_data *data) {} +void __init at91_add_device_nand(struct atmel_nand_data *data) {} #endif diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c index 8a81f76f0200..9762b15f658a 100644 --- a/arch/arm/mach-at91/at91sam9263_devices.c +++ b/arch/arm/mach-at91/at91sam9263_devices.c @@ -353,7 +353,7 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {} * -------------------------------------------------------------------- */ #if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE) -static struct at91_nand_data nand_data; +static struct atmel_nand_data nand_data; #define NAND_BASE AT91_CHIPSELECT_3 @@ -371,7 +371,7 @@ static struct resource nand_resources[] = { }; static struct platform_device at91sam9263_nand_device = { - .name = "at91_nand", + .name = "atmel_nand", .id = -1, .dev = { .platform_data = &nand_data, @@ -380,7 +380,7 @@ static struct platform_device at91sam9263_nand_device = { .num_resources = ARRAY_SIZE(nand_resources), }; -void __init at91_add_device_nand(struct at91_nand_data *data) +void __init at91_add_device_nand(struct atmel_nand_data *data) { unsigned long csa, mode; @@ -421,7 +421,7 @@ void __init at91_add_device_nand(struct at91_nand_data *data) platform_device_register(&at91sam9263_nand_device); } #else -void __init at91_add_device_nand(struct at91_nand_data *data) {} +void __init at91_add_device_nand(struct atmel_nand_data *data) {} #endif diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c index ae28101e7542..5f3094870cad 100644 --- a/arch/arm/mach-at91/at91sam9rl_devices.c +++ b/arch/arm/mach-at91/at91sam9rl_devices.c @@ -195,7 +195,7 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {} * -------------------------------------------------------------------- */ #if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE) -static struct at91_nand_data nand_data; +static struct atmel_nand_data nand_data; #define NAND_BASE AT91_CHIPSELECT_3 @@ -212,8 +212,8 @@ static struct resource nand_resources[] = { } }; -static struct platform_device at91_nand_device = { - .name = "at91_nand", +static struct platform_device atmel_nand_device = { + .name = "atmel_nand", .id = -1, .dev = { .platform_data = &nand_data, @@ -222,7 +222,7 @@ static struct platform_device at91_nand_device = { .num_resources = ARRAY_SIZE(nand_resources), }; -void __init at91_add_device_nand(struct at91_nand_data *data) +void __init at91_add_device_nand(struct atmel_nand_data *data) { unsigned long csa; @@ -259,11 +259,11 @@ void __init at91_add_device_nand(struct at91_nand_data *data) at91_set_A_periph(AT91_PIN_PB5, 0); /* NANDWE */ nand_data = *data; - platform_device_register(&at91_nand_device); + platform_device_register(&atmel_nand_device); } #else -void __init at91_add_device_nand(struct at91_nand_data *data) {} +void __init at91_add_device_nand(struct atmel_nand_data *data) {} #endif diff --git a/arch/arm/mach-at91/board-cam60.c b/arch/arm/mach-at91/board-cam60.c index b22a1a004055..af2c33aff1a8 100644 --- a/arch/arm/mach-at91/board-cam60.c +++ b/arch/arm/mach-at91/board-cam60.c @@ -142,7 +142,7 @@ static struct mtd_partition * __init nand_partitions(int size, int *num_partitio return cam60_nand_partition; } -static struct at91_nand_data __initdata cam60_nand_data = { +static struct atmel_nand_data __initdata cam60_nand_data = { .ale = 21, .cle = 22, // .det_pin = ... not there diff --git a/arch/arm/mach-at91/board-cap9adk.c b/arch/arm/mach-at91/board-cap9adk.c index 8a2a958639db..a1c41d7c0be9 100644 --- a/arch/arm/mach-at91/board-cap9adk.c +++ b/arch/arm/mach-at91/board-cap9adk.c @@ -181,7 +181,7 @@ static struct mtd_partition * __init nand_partitions(int size, int *num_partitio return cap9adk_nand_partitions; } -static struct at91_nand_data __initdata cap9adk_nand_data = { +static struct atmel_nand_data __initdata cap9adk_nand_data = { .ale = 21, .cle = 22, // .det_pin = ... not connected diff --git a/arch/arm/mach-at91/board-dk.c b/arch/arm/mach-at91/board-dk.c index dab958d25926..02a70b2f355b 100644 --- a/arch/arm/mach-at91/board-dk.c +++ b/arch/arm/mach-at91/board-dk.c @@ -147,7 +147,7 @@ static struct mtd_partition * __init nand_partitions(int size, int *num_partitio return dk_nand_partition; } -static struct at91_nand_data __initdata dk_nand_data = { +static struct atmel_nand_data __initdata dk_nand_data = { .ale = 22, .cle = 21, .det_pin = AT91_PIN_PB1, diff --git a/arch/arm/mach-at91/board-kb9202.c b/arch/arm/mach-at91/board-kb9202.c index cb065febd95e..082ed59365a4 100644 --- a/arch/arm/mach-at91/board-kb9202.c +++ b/arch/arm/mach-at91/board-kb9202.c @@ -105,7 +105,7 @@ static struct mtd_partition * __init nand_partitions(int size, int *num_partitio return kb9202_nand_partition; } -static struct at91_nand_data __initdata kb9202_nand_data = { +static struct atmel_nand_data __initdata kb9202_nand_data = { .ale = 22, .cle = 21, // .det_pin = ... not there diff --git a/arch/arm/mach-at91/board-sam9-l9260.c b/arch/arm/mach-at91/board-sam9-l9260.c index 8f76af5e219a..57a6221943ed 100644 --- a/arch/arm/mach-at91/board-sam9-l9260.c +++ b/arch/arm/mach-at91/board-sam9-l9260.c @@ -141,7 +141,7 @@ static struct mtd_partition * __init nand_partitions(int size, int *num_partitio return ek_nand_partition; } -static struct at91_nand_data __initdata ek_nand_data = { +static struct atmel_nand_data __initdata ek_nand_data = { .ale = 21, .cle = 22, // .det_pin = ... not connected diff --git a/arch/arm/mach-at91/board-sam9260ek.c b/arch/arm/mach-at91/board-sam9260ek.c index 4d1d9c777084..6a680795c3c8 100644 --- a/arch/arm/mach-at91/board-sam9260ek.c +++ b/arch/arm/mach-at91/board-sam9260ek.c @@ -178,7 +178,7 @@ static struct mtd_partition * __init nand_partitions(int size, int *num_partitio return ek_nand_partition; } -static struct at91_nand_data __initdata ek_nand_data = { +static struct atmel_nand_data __initdata ek_nand_data = { .ale = 21, .cle = 22, // .det_pin = ... not connected diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c index 08382c0df221..43dfbd0d543a 100644 --- a/arch/arm/mach-at91/board-sam9261ek.c +++ b/arch/arm/mach-at91/board-sam9261ek.c @@ -183,7 +183,7 @@ static struct mtd_partition * __init nand_partitions(int size, int *num_partitio return ek_nand_partition; } -static struct at91_nand_data __initdata ek_nand_data = { +static struct atmel_nand_data __initdata ek_nand_data = { .ale = 22, .cle = 21, // .det_pin = ... not connected diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c index b4cd5d0ed597..6605a0980117 100644 --- a/arch/arm/mach-at91/board-sam9263ek.c +++ b/arch/arm/mach-at91/board-sam9263ek.c @@ -187,7 +187,7 @@ static struct mtd_partition * __init nand_partitions(int size, int *num_partitio return ek_nand_partition; } -static struct at91_nand_data __initdata ek_nand_data = { +static struct atmel_nand_data __initdata ek_nand_data = { .ale = 21, .cle = 22, // .det_pin = ... not connected diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c index b6a70fc735c3..66e77bb2e079 100644 --- a/arch/arm/mach-at91/board-sam9rlek.c +++ b/arch/arm/mach-at91/board-sam9rlek.c @@ -96,7 +96,7 @@ static struct mtd_partition * __init nand_partitions(int size, int *num_partitio return ek_nand_partition; } -static struct at91_nand_data __initdata ek_nand_data = { +static struct atmel_nand_data __initdata ek_nand_data = { .ale = 21, .cle = 22, // .det_pin = ... not connected diff --git a/arch/arm/mach-at91/board-yl-9200.c b/arch/arm/mach-at91/board-yl-9200.c index 7079050ab88d..bbbfd06f5e0c 100755 --- a/arch/arm/mach-at91/board-yl-9200.c +++ b/arch/arm/mach-at91/board-yl-9200.c @@ -180,7 +180,7 @@ static struct mtd_partition * __init nand_partitions(int size, int *num_partitio return yl9200_nand_partition; } -static struct at91_nand_data __initdata yl9200_nand_data = { +static struct atmel_nand_data __initdata yl9200_nand_data = { .ale = 6, .cle = 7, // .det_pin = ... not connected diff --git a/arch/arm/mach-iop32x/n2100.c b/arch/arm/mach-iop32x/n2100.c index 2741063bf361..28f164ea4726 100644 --- a/arch/arm/mach-iop32x/n2100.c +++ b/arch/arm/mach-iop32x/n2100.c @@ -17,6 +17,7 @@ #include #include #include +#include #include #include #include @@ -206,6 +207,53 @@ static struct f75375s_platform_data n2100_f75375s = { .pwm_enable = { 0, 0 }, }; +static struct pca9532_platform_data n2100_leds = { + .leds = { + { .name = "n2100:red:satafail0", + .state = PCA9532_OFF, + .type = PCA9532_TYPE_LED, + }, + { .name = "n2100:red:satafail1", + .state = PCA9532_OFF, + .type = PCA9532_TYPE_LED, + }, + { .name = "n2100:blue:usb", + .state = PCA9532_OFF, + .type = PCA9532_TYPE_LED, + }, + { .type = PCA9532_TYPE_NONE }, + + { .type = PCA9532_TYPE_NONE }, + { .type = PCA9532_TYPE_NONE }, + { .type = PCA9532_TYPE_NONE }, + { .name = "n2100:red:usb", + .state = PCA9532_OFF, + .type = PCA9532_TYPE_LED, + }, + + { .type = PCA9532_TYPE_NONE }, /* power OFF gpio */ + { .type = PCA9532_TYPE_NONE }, /* reset gpio */ + { .type = PCA9532_TYPE_NONE }, + { .type = PCA9532_TYPE_NONE }, + + { .type = PCA9532_TYPE_NONE }, + { .name = "n2100:orange:system", + .state = PCA9532_OFF, + .type = PCA9532_TYPE_LED, + }, + { .name = "n2100:red:system", + .state = PCA9532_OFF, + .type = PCA9532_TYPE_LED, + }, + { .name = "N2100 beeper" , + .state = PCA9532_OFF, + .type = PCA9532_TYPE_N2100_BEEP, + }, + }, + .psc = { 0, 0 }, + .pwm = { 0, 0 }, +}; + static struct i2c_board_info __initdata n2100_i2c_devices[] = { { I2C_BOARD_INFO("rs5c372b", 0x32), @@ -214,6 +262,10 @@ static struct i2c_board_info __initdata n2100_i2c_devices[] = { I2C_BOARD_INFO("f75375", 0x2e), .platform_data = &n2100_f75375s, }, + { + I2C_BOARD_INFO("pca9532", 0x60), + .platform_data = &n2100_leds, + }, }; /* diff --git a/arch/arm/mach-ns9xxx/clock.c b/arch/arm/mach-ns9xxx/clock.c index f8639161068f..44ed20d4a388 100644 --- a/arch/arm/mach-ns9xxx/clock.c +++ b/arch/arm/mach-ns9xxx/clock.c @@ -14,8 +14,8 @@ #include #include #include +#include -#include #include "clock.h" static LIST_HEAD(clocks); diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index 914bb33dab92..e8ee7ec9ff6d 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -16,18 +16,24 @@ config CPU_PXA310 config CPU_PXA320 bool "PXA320 (codename Monahans-P)" +config CPU_PXA930 + bool "PXA930 (codename Tavor-P)" + endmenu endif -menu "Select target boards" - config ARCH_GUMSTIX bool "Gumstix XScale boards" help Say Y here if you intend to run this kernel on a Gumstix Full Function Minature Computer. +config MACH_GUMSTIX_F + bool "Basix, Connex, ws-200ax, ws-400ax systems" + depends on ARCH_GUMSTIX + select PXA25x + config ARCH_LUBBOCK bool "Intel DBPXA250 Development Platform" select PXA25x @@ -58,146 +64,6 @@ config PXA_SHARPSL SL-C3000 (Spitz), SL-C3100 (Borzoi) or SL-C6000x (Tosa) handheld computer. -config ARCH_PXA_ESERIES - bool "PXA based Toshiba e-series PDAs" - select PXA25x - -config MACH_E330 - bool "Toshiba e330" - default y - depends on ARCH_PXA_ESERIES - help - Say Y here if you intend to run this kernel on a Toshiba - e330 family PDA. - -config MACH_E740 - bool "Toshiba e740" - default y - depends on ARCH_PXA_ESERIES - help - Say Y here if you intend to run this kernel on a Toshiba - e740 family PDA. - -config MACH_E750 - bool "Toshiba e750" - default y - depends on ARCH_PXA_ESERIES - help - Say Y here if you intend to run this kernel on a Toshiba - e750 family PDA. - -config MACH_E400 - bool "Toshiba e400" - default y - depends on ARCH_PXA_ESERIES - help - Say Y here if you intend to run this kernel on a Toshiba - e400 family PDA. - -config MACH_E800 - bool "Toshiba e800" - default y - depends on ARCH_PXA_ESERIES - help - Say Y here if you intend to run this kernel on a Toshiba - e800 family PDA. - -config MACH_TRIZEPS4 - bool "Keith und Koep Trizeps4 DIMM-Module" - select PXA27x - -config MACH_EM_X270 - bool "CompuLab EM-x270 platform" - select PXA27x - -config MACH_COLIBRI - bool "Toradex Colibri PX27x" - select PXA27x - -config MACH_ZYLONITE - bool "PXA3xx Development Platform" - select PXA3xx - select HAVE_PWM - -config MACH_LITTLETON - bool "PXA3xx Form Factor Platform (aka Littleton)" - select PXA3xx - select PXA_SSP - -config MACH_ARMCORE - bool "CompuLab CM-X270 modules" - select PXA27x - select IWMMXT - -config MACH_MAGICIAN - bool "Enable HTC Magician Support" - depends on ARCH_PXA - select PXA27x - select IWMMXT - -config MACH_PCM027 - bool "Phytec phyCORE-PXA270 CPU module (PCM-027)" - select PXA27x - select IWMMXT - -endmenu - -choice - prompt "Used baseboard" - depends on MACH_PCM027 - -config MACH_PCM990_BASEBOARD - bool "PHYTEC PCM-990 development board" - select HAVE_PWM - -endchoice - -choice - prompt "display on pcm990" - depends on MACH_PCM990_BASEBOARD - -config PCM990_DISPLAY_SHARP - bool "sharp lq084v1dg21 stn display" - -config PCM990_DISPLAY_NEC - bool "nec nl6448bc20_18d tft display" - -config PCM990_DISPLAY_NONE - bool "no display" - -endchoice - -if ARCH_GUMSTIX - -choice - prompt "Select target Gumstix board" - -config MACH_GUMSTIX_F - bool "Basix, Connex, ws-200ax, ws-400ax systems" - select PXA25x - -endchoice - -endif - - -if MACH_TRIZEPS4 - -choice - prompt "Select base board for Trizeps 4 module" - -config MACH_TRIZEPS4_CONXS - bool "ConXS Eval Board" - -config MACH_TRIZEPS4_ANY - bool "another Board" - -endchoice - -endif - -endmenu - config MACH_POODLE bool "Enable Sharp SL-5600 (Poodle) Support" depends on PXA_SHARPSL @@ -249,6 +115,186 @@ config MACH_TOSA depends on PXA_SHARPSL select PXA25x +config ARCH_PXA_ESERIES + bool "PXA based Toshiba e-series PDAs" + select PXA25x + +config MACH_E330 + bool "Toshiba e330" + default y + depends on ARCH_PXA_ESERIES + help + Say Y here if you intend to run this kernel on a Toshiba + e330 family PDA. + +config MACH_E350 + bool "Toshiba e350" + default y + depends on ARCH_PXA_ESERIES + help + Say Y here if you intend to run this kernel on a Toshiba + e350 family PDA. + +config MACH_E740 + bool "Toshiba e740" + default y + depends on ARCH_PXA_ESERIES + select FB_W100 + help + Say Y here if you intend to run this kernel on a Toshiba + e740 family PDA. + +config MACH_E750 + bool "Toshiba e750" + default y + depends on ARCH_PXA_ESERIES + select FB_W100 + help + Say Y here if you intend to run this kernel on a Toshiba + e750 family PDA. + +config MACH_E400 + bool "Toshiba e400" + default y + depends on ARCH_PXA_ESERIES + help + Say Y here if you intend to run this kernel on a Toshiba + e400 family PDA. + +config MACH_E800 + bool "Toshiba e800" + default y + depends on ARCH_PXA_ESERIES + select FB_W100 + help + Say Y here if you intend to run this kernel on a Toshiba + e800 family PDA. + +config MACH_TRIZEPS4 + bool "Keith und Koep Trizeps4 DIMM-Module" + select PXA27x + +config MACH_TRIZEPS4_CONXS + bool "ConXS Eval Board" + depends on MACH_TRIZEPS4 + +config MACH_EM_X270 + bool "CompuLab EM-x270 platform" + select PXA27x + +config MACH_COLIBRI + bool "Toradex Colibri PX27x" + select PXA27x + +config MACH_ZYLONITE + bool "PXA3xx Development Platform (aka Zylonite)" + select PXA3xx + select HAVE_PWM + +config MACH_LITTLETON + bool "PXA3xx Form Factor Platform (aka Littleton)" + select PXA3xx + select PXA_SSP + +config MACH_TAVOREVB + bool "PXA930 Evaluation Board (aka TavorEVB)" + select PXA3xx + select PXA930 + +config MACH_SAAR + bool "PXA930 Handheld Platform (aka SAAR)" + select PXA3xx + select PXA930 + +config MACH_ARMCORE + bool "CompuLab CM-X270 modules" + select PXA27x + select IWMMXT + +config MACH_MAGICIAN + bool "Enable HTC Magician Support" + select PXA27x + select IWMMXT + +config MACH_PCM027 + bool "Phytec phyCORE-PXA270 CPU module (PCM-027)" + select PXA27x + select IWMMXT + select PXA_SSP + +config ARCH_PXA_PALM + bool "PXA based Palm PDAs" + select HAVE_PWM + +config MACH_PALMTX + bool "Palm T|X" + default y + depends on ARCH_PXA_PALM + select PXA27x + select IWMMXT + help + Say Y here if you intend to run this kernel on a Palm T|X + handheld computer. + +config MACH_PCM990_BASEBOARD + bool "PHYTEC PCM-990 development board" + select HAVE_PWM + depends on MACH_PCM027 + +choice + prompt "display on pcm990" + depends on MACH_PCM990_BASEBOARD + +config PCM990_DISPLAY_SHARP + bool "sharp lq084v1dg21 stn display" + +config PCM990_DISPLAY_NEC + bool "nec nl6448bc20_18d tft display" + +config PCM990_DISPLAY_NONE + bool "no display" + +endchoice + + +config PXA_EZX + bool "Motorola EZX Platform" + select PXA27x + select IWMMXT + select HAVE_PWM + +config MACH_EZX_A780 + bool "Motorola EZX A780" + default y + depends on PXA_EZX + +config MACH_EZX_E680 + bool "Motorola EZX E680" + default y + depends on PXA_EZX + +config MACH_EZX_A1200 + bool "Motorola EZX A1200" + default y + depends on PXA_EZX + +config MACH_EZX_A910 + bool "Motorola EZX A910" + default y + depends on PXA_EZX + +config MACH_EZX_E6 + bool "Motorola EZX E6" + default y + depends on PXA_EZX + +config MACH_EZX_E2 + bool "Motorola EZX E2" + default y + depends on PXA_EZX + +endmenu + config PXA25x bool help @@ -288,4 +334,13 @@ config PXA_PWM default BACKLIGHT_PWM help Enable support for PXA2xx/PXA3xx PWM controllers + +config TOSA_BT + tristate "Control the state of built-in bluetooth chip on Sharp SL-6000" + depends on MACH_TOSA + select RFKILL + help + This is a simple driver that is able to control + the state of built in bluetooth chip on tosa. + endif diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile index c4dfbe87fc4e..99ecbe7f8506 100644 --- a/arch/arm/mach-pxa/Makefile +++ b/arch/arm/mach-pxa/Makefile @@ -4,7 +4,7 @@ # Common support (must be linked before board specific support) obj-y += clock.o devices.o generic.o irq.o dma.o \ - time.o gpio.o + time.o gpio.o reset.o obj-$(CONFIG_PM) += pm.o sleep.o standby.o obj-$(CONFIG_CPU_FREQ) += cpu-pxa.o @@ -18,6 +18,7 @@ obj-$(CONFIG_PXA27x) += mfp-pxa2xx.o pxa2xx.o pxa27x.o obj-$(CONFIG_PXA3xx) += mfp-pxa3xx.o pxa3xx.o smemc.o obj-$(CONFIG_CPU_PXA300) += pxa300.o obj-$(CONFIG_CPU_PXA320) += pxa320.o +obj-$(CONFIG_CPU_PXA930) += pxa930.o # Specific board support obj-$(CONFIG_ARCH_GUMSTIX) += gumstix.o @@ -36,7 +37,12 @@ obj-$(CONFIG_MACH_PCM990_BASEBOARD) += pcm990-baseboard.o obj-$(CONFIG_MACH_TOSA) += tosa.o obj-$(CONFIG_MACH_EM_X270) += em-x270.o obj-$(CONFIG_MACH_MAGICIAN) += magician.o -obj-$(CONFIG_ARCH_PXA_ESERIES) += eseries.o +obj-$(CONFIG_ARCH_PXA_ESERIES) += eseries.o eseries_udc.o +obj-$(CONFIG_MACH_E740) += e740_lcd.o +obj-$(CONFIG_MACH_E750) += e750_lcd.o +obj-$(CONFIG_MACH_E400) += e400_lcd.o +obj-$(CONFIG_MACH_E800) += e800_lcd.o +obj-$(CONFIG_MACH_PALMTX) += palmtx.o ifeq ($(CONFIG_MACH_ZYLONITE),y) obj-y += zylonite.o @@ -44,8 +50,11 @@ ifeq ($(CONFIG_MACH_ZYLONITE),y) obj-$(CONFIG_CPU_PXA320) += zylonite_pxa320.o endif obj-$(CONFIG_MACH_LITTLETON) += littleton.o +obj-$(CONFIG_MACH_TAVOREVB) += tavorevb.o +obj-$(CONFIG_MACH_SAAR) += saar.o obj-$(CONFIG_MACH_ARMCORE) += cm-x270.o +obj-$(CONFIG_PXA_EZX) += ezx.o # Support for blinky lights led-y := leds.o @@ -59,3 +68,5 @@ obj-$(CONFIG_LEDS) += $(led-y) ifeq ($(CONFIG_PCI),y) obj-$(CONFIG_MACH_ARMCORE) += cm-x270-pci.o endif + +obj-$(CONFIG_TOSA_BT) += tosa-bt.o diff --git a/arch/arm/mach-pxa/clock.c b/arch/arm/mach-pxa/clock.c index b4d04955dcb0..630063ffa6fc 100644 --- a/arch/arm/mach-pxa/clock.c +++ b/arch/arm/mach-pxa/clock.c @@ -101,21 +101,6 @@ unsigned long clk_get_rate(struct clk *clk) EXPORT_SYMBOL(clk_get_rate); -static void clk_gpio27_enable(struct clk *clk) -{ - pxa_gpio_mode(GPIO11_3_6MHz_MD); -} - -static void clk_gpio27_disable(struct clk *clk) -{ -} - -static const struct clkops clk_gpio27_ops = { - .enable = clk_gpio27_enable, - .disable = clk_gpio27_disable, -}; - - void clk_cken_enable(struct clk *clk) { CKEN |= 1 << clk->cken; @@ -131,14 +116,6 @@ const struct clkops clk_cken_ops = { .disable = clk_cken_disable, }; -static struct clk common_clks[] = { - { - .name = "GPIO27_CLK", - .ops = &clk_gpio27_ops, - .rate = 3686400, - }, -}; - void clks_register(struct clk *clks, size_t num) { int i; @@ -148,10 +125,3 @@ void clks_register(struct clk *clks, size_t num) list_add(&clks[i].node, &clocks); mutex_unlock(&clocks_mutex); } - -static int __init clk_init(void) -{ - clks_register(common_clks, ARRAY_SIZE(common_clks)); - return 0; -} -arch_initcall(clk_init); diff --git a/arch/arm/mach-pxa/clock.h b/arch/arm/mach-pxa/clock.h index 83cbfaba485d..1ec8f9178aaf 100644 --- a/arch/arm/mach-pxa/clock.h +++ b/arch/arm/mach-pxa/clock.h @@ -47,9 +47,42 @@ struct clk { .other = _other, \ } +#define INIT_CLK(_name, _ops, _rate, _delay, _dev) \ + { \ + .name = _name, \ + .dev = _dev, \ + .ops = _ops, \ + .rate = _rate, \ + .delay = _delay, \ + } + extern const struct clkops clk_cken_ops; void clk_cken_enable(struct clk *clk); void clk_cken_disable(struct clk *clk); +#ifdef CONFIG_PXA3xx +#define PXA3xx_CKEN(_name, _cken, _rate, _delay, _dev) \ + { \ + .name = _name, \ + .dev = _dev, \ + .ops = &clk_pxa3xx_cken_ops, \ + .rate = _rate, \ + .cken = CKEN_##_cken, \ + .delay = _delay, \ + } + +#define PXA3xx_CK(_name, _cken, _ops, _dev) \ + { \ + .name = _name, \ + .dev = _dev, \ + .ops = _ops, \ + .cken = CKEN_##_cken, \ + } + +extern const struct clkops clk_pxa3xx_cken_ops; +extern void clk_pxa3xx_cken_enable(struct clk *); +extern void clk_pxa3xx_cken_disable(struct clk *); +#endif + void clks_register(struct clk *clks, size_t num); diff --git a/arch/arm/mach-pxa/cm-x270-pci.c b/arch/arm/mach-pxa/cm-x270-pci.c index 319c9ff3ab9a..bcf0cde6ccc9 100644 --- a/arch/arm/mach-pxa/cm-x270-pci.c +++ b/arch/arm/mach-pxa/cm-x270-pci.c @@ -5,7 +5,7 @@ * * Bits taken from various places. * - * Copyright (C) 2007 Compulab, Ltd. + * Copyright (C) 2007, 2008 Compulab, Ltd. * Mike Rapoport * * This program is free software; you can redistribute it and/or modify @@ -19,16 +19,16 @@ #include #include #include +#include #include -#include #include -#include #include #include -unsigned long it8152_base_address = CMX270_IT8152_VIRT; +unsigned long it8152_base_address; +static int cmx270_it8152_irq_gpio; /* * Only first 64MB of memory can be accessed via PCI. @@ -42,7 +42,7 @@ void __init cmx270_pci_adjust_zones(int node, unsigned long *zone_size, unsigned int sz = SZ_64M >> PAGE_SHIFT; if (machine_is_armcore()) { - pr_info("Adjusting zones for CM-x270\n"); + pr_info("Adjusting zones for CM-X270\n"); /* * Only adjust if > 64M on current system @@ -60,19 +60,20 @@ void __init cmx270_pci_adjust_zones(int node, unsigned long *zone_size, static void cmx270_it8152_irq_demux(unsigned int irq, struct irq_desc *desc) { /* clear our parent irq */ - GEDR(GPIO_IT8152_IRQ) = GPIO_bit(GPIO_IT8152_IRQ); + GEDR(cmx270_it8152_irq_gpio) = GPIO_bit(cmx270_it8152_irq_gpio); it8152_irq_demux(irq, desc); } -void __cmx270_pci_init_irq(void) +void __cmx270_pci_init_irq(int irq_gpio) { it8152_init_irq(); - pxa_gpio_mode(IRQ_TO_GPIO(GPIO_IT8152_IRQ)); - set_irq_type(IRQ_GPIO(GPIO_IT8152_IRQ), IRQT_RISING); - set_irq_chained_handler(IRQ_GPIO(GPIO_IT8152_IRQ), - cmx270_it8152_irq_demux); + cmx270_it8152_irq_gpio = irq_gpio; + + set_irq_type(gpio_to_irq(irq_gpio), IRQT_RISING); + + set_irq_chained_handler(gpio_to_irq(irq_gpio), cmx270_it8152_irq_demux); } #ifdef CONFIG_PM @@ -115,8 +116,8 @@ static int __init cmx270_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) /* Here comes the ugly part. The routing is baseboard specific, - but defining a platform for each possible base of CM-x270 is - unrealistic. Here we keep mapping for ATXBase and SB-x270. + but defining a platform for each possible base of CM-X270 is + unrealistic. Here we keep mapping for ATXBase and SB-X270. */ /* ATXBASE PCI slot */ if (slot == 7) diff --git a/arch/arm/mach-pxa/cm-x270-pci.h b/arch/arm/mach-pxa/cm-x270-pci.h index ffe37b66f9a0..48f532f4cb51 100644 --- a/arch/arm/mach-pxa/cm-x270-pci.h +++ b/arch/arm/mach-pxa/cm-x270-pci.h @@ -1,13 +1,13 @@ -extern void __cmx270_pci_init_irq(void); +extern void __cmx270_pci_init_irq(int irq_gpio); extern void __cmx270_pci_suspend(void); extern void __cmx270_pci_resume(void); #ifdef CONFIG_PCI -#define cmx270_pci_init_irq __cmx270_pci_init_irq -#define cmx270_pci_suspend __cmx270_pci_suspend -#define cmx270_pci_resume __cmx270_pci_resume +#define cmx270_pci_init_irq(x) __cmx270_pci_init_irq(x) +#define cmx270_pci_suspend(x) __cmx270_pci_suspend(x) +#define cmx270_pci_resume(x) __cmx270_pci_resume(x) #else -#define cmx270_pci_init_irq() do {} while (0) -#define cmx270_pci_suspend() do {} while (0) -#define cmx270_pci_resume() do {} while (0) +#define cmx270_pci_init_irq(x) do {} while (0) +#define cmx270_pci_suspend(x) do {} while (0) +#define cmx270_pci_resume(x) do {} while (0) #endif diff --git a/arch/arm/mach-pxa/cm-x270.c b/arch/arm/mach-pxa/cm-x270.c index 01b9964acec1..402e807eae54 100644 --- a/arch/arm/mach-pxa/cm-x270.c +++ b/arch/arm/mach-pxa/cm-x270.c @@ -1,7 +1,7 @@ /* * linux/arch/arm/mach-pxa/cm-x270.c * - * Copyright (C) 2007 CompuLab, Ltd. + * Copyright (C) 2007, 2008 CompuLab, Ltd. * Mike Rapoport * * This program is free software; you can redistribute it and/or modify @@ -9,44 +9,156 @@ * published by the Free Software Foundation. */ -#include -#include -#include #include -#include #include -#include -#include +#include +#include #include #include -#include - #include