USB: EHCI: fix scheduling while atomic during suspend

There is a msleep with spin lock held during ehci pci suspend, which will
cause kernel BUG: scheduling while atomic. Fix that.

[  184.139620] BUG: scheduling while atomic: kworker/u:11/416/0x00000002
[  184.139632] 4 locks held by kworker/u:11/416:
[  184.139640]  #0:  (events_unbound){+.+.+.}, at: [<c104ddd4>] process_one_work+0x1b3/0x4cb
[  184.139669]  #1:  ((&entry->work)){+.+.+.}, at: [<c104ddd4>] process_one_work+0x1b3/0x4cb
[  184.139686]  #2:  (&__lockdep_no_validate__){+.+.+.}, at: [<c127cde3>] __device_suspend+0x2c/0x154
[  184.139706]  #3:  (&(&ehci->lock)->rlock){-.-...}, at: [<c132f3d8>] ehci_pci_suspend+0x35/0x7b
[  184.139725] Modules linked in: serio_raw pegasus joydev mrst_gfx(C) battery
[  184.139748] irq event stamp: 52
[  184.139753] hardirqs last  enabled at (51): [<c14fdaac>] mutex_lock_nested+0x258/0x293
[  184.139766] hardirqs last disabled at (52): [<c14fe7b4>] _raw_spin_lock_irqsave+0xf/0x3e
[  184.139777] softirqs last  enabled at (0): [<c10371c1>] copy_process+0x3d2/0x109d
[  184.139789] softirqs last disabled at (0): [<  (null)>]   (null)
[  184.139802] Pid: 416, comm: kworker/u:11 Tainted: G         C  2.6.37-6.3-adaptation-oaktrail #37
[  184.139809] Call Trace:
[  184.139820]  [<c102eeff>] __schedule_bug+0x5e/0x65
[  184.139829]  [<c14fbca5>] schedule+0xac/0xc4c
[  184.139840]  [<c11d4845>] ? string+0x37/0x8b
[  184.139853]  [<c1044f21>] ? lock_timer_base+0x1f/0x3e
[  184.139863]  [<c14fe7da>] ? _raw_spin_lock_irqsave+0x35/0x3e
[  184.139876]  [<c1061590>] ? trace_hardirqs_off+0xb/0xd
[  184.139885]  [<c14fccdc>] schedule_timeout+0x283/0x2d9
[  184.139896]  [<c104516f>] ? process_timeout+0x0/0xa
[  184.139906]  [<c14fcd47>] schedule_timeout_uninterruptible+0x15/0x17
[  184.139916]  [<c104566a>] msleep+0x10/0x16
[  184.139926]  [<c132f316>] ehci_adjust_port_wakeup_flags+0x69/0xf6
[  184.139937]  [<c132f3eb>] ehci_pci_suspend+0x48/0x7b
[  184.139946]  [<c1326587>] suspend_common+0x52/0xbb
[  184.139956]  [<c1326625>] hcd_pci_suspend+0x26/0x28
[  184.139967]  [<c11e7182>] pci_pm_suspend+0x5f/0xd0
[  184.139976]  [<c127ca3a>] pm_op+0x5d/0xf0
[  184.139986]  [<c127ceac>] __device_suspend+0xf5/0x154
[  184.139996]  [<c127d2c8>] async_suspend+0x16/0x3a
[  184.140006]  [<c1058f54>] async_run_entry_fn+0x89/0x111
[  184.140016]  [<c104deb6>] process_one_work+0x295/0x4cb
[  184.140026]  [<c1058ecb>] ? async_run_entry_fn+0x0/0x111
[  184.140036]  [<c104e3d0>] worker_thread+0x17f/0x298
[  184.140045]  [<c104e251>] ? worker_thread+0x0/0x298
[  184.140055]  [<c105277f>] kthread+0x64/0x69
[  184.140064]  [<c105271b>] ? kthread+0x0/0x69
[  184.140075]  [<c1002efa>] kernel_thread_helper+0x6/0x1a

Signed-off-by: Yin Kangkai <kangkai.yin@intel.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
CC: David Brownell <dbrownell@users.sourceforge.net>
CC: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This commit is contained in:
Yin Kangkai 2011-01-28 12:04:35 +08:00 committed by Greg Kroah-Hartman
parent 4e8ed7e499
commit 148fc55fd0
3 changed files with 9 additions and 2 deletions

View File

@ -227,8 +227,8 @@ static int ehci_hcd_au1xxx_drv_suspend(struct device *dev)
* mark HW unaccessible. The PM and USB cores make sure that * mark HW unaccessible. The PM and USB cores make sure that
* the root hub is either suspended or stopped. * the root hub is either suspended or stopped.
*/ */
spin_lock_irqsave(&ehci->lock, flags);
ehci_prepare_ports_for_controller_suspend(ehci, device_may_wakeup(dev)); ehci_prepare_ports_for_controller_suspend(ehci, device_may_wakeup(dev));
spin_lock_irqsave(&ehci->lock, flags);
ehci_writel(ehci, 0, &ehci->regs->intr_enable); ehci_writel(ehci, 0, &ehci->regs->intr_enable);
(void)ehci_readl(ehci, &ehci->regs->intr_enable); (void)ehci_readl(ehci, &ehci->regs->intr_enable);

View File

@ -111,6 +111,7 @@ static void ehci_adjust_port_wakeup_flags(struct ehci_hcd *ehci,
{ {
int port; int port;
u32 temp; u32 temp;
unsigned long flags;
/* If remote wakeup is enabled for the root hub but disabled /* If remote wakeup is enabled for the root hub but disabled
* for the controller, we must adjust all the port wakeup flags * for the controller, we must adjust all the port wakeup flags
@ -120,6 +121,8 @@ static void ehci_adjust_port_wakeup_flags(struct ehci_hcd *ehci,
if (!ehci_to_hcd(ehci)->self.root_hub->do_remote_wakeup || do_wakeup) if (!ehci_to_hcd(ehci)->self.root_hub->do_remote_wakeup || do_wakeup)
return; return;
spin_lock_irqsave(&ehci->lock, flags);
/* clear phy low-power mode before changing wakeup flags */ /* clear phy low-power mode before changing wakeup flags */
if (ehci->has_hostpc) { if (ehci->has_hostpc) {
port = HCS_N_PORTS(ehci->hcs_params); port = HCS_N_PORTS(ehci->hcs_params);
@ -131,7 +134,9 @@ static void ehci_adjust_port_wakeup_flags(struct ehci_hcd *ehci,
temp = ehci_readl(ehci, hostpc_reg); temp = ehci_readl(ehci, hostpc_reg);
ehci_writel(ehci, temp & ~HOSTPC_PHCD, hostpc_reg); ehci_writel(ehci, temp & ~HOSTPC_PHCD, hostpc_reg);
} }
spin_unlock_irqrestore(&ehci->lock, flags);
msleep(5); msleep(5);
spin_lock_irqsave(&ehci->lock, flags);
} }
port = HCS_N_PORTS(ehci->hcs_params); port = HCS_N_PORTS(ehci->hcs_params);
@ -170,6 +175,8 @@ static void ehci_adjust_port_wakeup_flags(struct ehci_hcd *ehci,
/* Does the root hub have a port wakeup pending? */ /* Does the root hub have a port wakeup pending? */
if (!suspending && (ehci_readl(ehci, &ehci->regs->status) & STS_PCD)) if (!suspending && (ehci_readl(ehci, &ehci->regs->status) & STS_PCD))
usb_hcd_resume_root_hub(ehci_to_hcd(ehci)); usb_hcd_resume_root_hub(ehci_to_hcd(ehci));
spin_unlock_irqrestore(&ehci->lock, flags);
} }
static int ehci_bus_suspend (struct usb_hcd *hcd) static int ehci_bus_suspend (struct usb_hcd *hcd)

View File

@ -367,8 +367,8 @@ static int ehci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup)
* mark HW unaccessible. The PM and USB cores make sure that * mark HW unaccessible. The PM and USB cores make sure that
* the root hub is either suspended or stopped. * the root hub is either suspended or stopped.
*/ */
spin_lock_irqsave (&ehci->lock, flags);
ehci_prepare_ports_for_controller_suspend(ehci, do_wakeup); ehci_prepare_ports_for_controller_suspend(ehci, do_wakeup);
spin_lock_irqsave (&ehci->lock, flags);
ehci_writel(ehci, 0, &ehci->regs->intr_enable); ehci_writel(ehci, 0, &ehci->regs->intr_enable);
(void)ehci_readl(ehci, &ehci->regs->intr_enable); (void)ehci_readl(ehci, &ehci->regs->intr_enable);