Merge commit 'v2.6.30-rc5' into x86/mm

Merge reason: this branch was on a .30-rc2 base - sync it up with
              all the latest fixes.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
This commit is contained in:
Ingo Molnar 2009-05-11 09:33:06 +02:00
commit 134cbf35c7
1067 changed files with 23873 additions and 24830 deletions

View File

@ -69,9 +69,13 @@ Description:
gpe1F: 0 invalid
gpe_all: 1192
sci: 1194
sci_not: 0
sci - The total number of times the ACPI SCI
has claimed an interrupt.
sci - The number of times the ACPI SCI
has been called and claimed an interrupt.
sci_not - The number of times the ACPI SCI
has been called and NOT claimed an interrupt.
gpe_all - count of SCI caused by GPEs.

View File

@ -143,7 +143,8 @@ quiet_cmd_db2pdf = PDF $@
$(call cmd,db2pdf)
main_idx = Documentation/DocBook/index.html
index = index.html
main_idx = Documentation/DocBook/$(index)
build_main_index = rm -rf $(main_idx) && \
echo '<h1>Linux Kernel HTML Documentation</h1>' >> $(main_idx) && \
echo '<h2>Kernel Version: $(KERNELVERSION)</h2>' >> $(main_idx) && \
@ -232,7 +233,7 @@ clean-files := $(DOCBOOKS) \
$(patsubst %.xml, %.pdf, $(DOCBOOKS)) \
$(patsubst %.xml, %.html, $(DOCBOOKS)) \
$(patsubst %.xml, %.9, $(DOCBOOKS)) \
$(C-procfs-example)
$(C-procfs-example) $(index)
clean-dirs := $(patsubst %.xml,%,$(DOCBOOKS)) man

View File

@ -190,16 +190,20 @@ X!Ekernel/module.c
!Edrivers/pci/pci.c
!Edrivers/pci/pci-driver.c
!Edrivers/pci/remove.c
!Edrivers/pci/pci-acpi.c
!Edrivers/pci/search.c
!Edrivers/pci/msi.c
!Edrivers/pci/bus.c
!Edrivers/pci/access.c
!Edrivers/pci/irq.c
!Edrivers/pci/htirq.c
<!-- FIXME: Removed for now since no structured comments in source
X!Edrivers/pci/hotplug.c
-->
!Edrivers/pci/probe.c
!Edrivers/pci/slot.c
!Edrivers/pci/rom.c
!Edrivers/pci/iov.c
!Idrivers/pci/pci-sysfs.c
</sect1>
<sect1><title>PCI Hotplug Support Library</title>
!Edrivers/pci/hotplug/pci_hotplug_core.c

View File

@ -512,16 +512,24 @@ locking rules:
BKL mmap_sem PageLocked(page)
open: no yes
close: no yes
fault: no yes
page_mkwrite: no yes no
fault: no yes can return with page locked
page_mkwrite: no yes can return with page locked
access: no yes
->page_mkwrite() is called when a previously read-only page is
about to become writeable. The file system is responsible for
protecting against truncate races. Once appropriate action has been
taking to lock out truncate, the page range should be verified to be
within i_size. The page mapping should also be checked that it is not
NULL.
->fault() is called when a previously not present pte is about
to be faulted in. The filesystem must find and return the page associated
with the passed in "pgoff" in the vm_fault structure. If it is possible that
the page may be truncated and/or invalidated, then the filesystem must lock
the page, then ensure it is not already truncated (the page lock will block
subsequent truncate), and then return with VM_FAULT_LOCKED, and the page
locked. The VM will unlock the page.
->page_mkwrite() is called when a previously read-only pte is
about to become writeable. The filesystem again must ensure that there are
no truncate/invalidate races, and then return with the page locked. If
the page has been truncated, the filesystem should not look up a new page
like the ->fault() handler, but simply return with VM_FAULT_NOPAGE, which
will cause the VM to retry the fault.
->access() is called when get_user_pages() fails in
acces_process_vm(), typically used to debug a process through

View File

@ -407,7 +407,7 @@ A NOTE ON SECURITY
==================
CacheFiles makes use of the split security in the task_struct. It allocates
its own task_security structure, and redirects current->act_as to point to it
its own task_security structure, and redirects current->cred to point to it
when it acts on behalf of another process, in that process's context.
The reason it does this is that it calls vfs_mkdir() and suchlike rather than
@ -429,9 +429,9 @@ This means it may lose signals or ptrace events for example, and affects what
the process looks like in /proc.
So CacheFiles makes use of a logical split in the security between the
objective security (task->sec) and the subjective security (task->act_as). The
objective security holds the intrinsic security properties of a process and is
never overridden. This is what appears in /proc, and is what is used when a
objective security (task->real_cred) and the subjective security (task->cred).
The objective security holds the intrinsic security properties of a process and
is never overridden. This is what appears in /proc, and is what is used when a
process is the target of an operation by some other process (SIGKILL for
example).

View File

@ -277,8 +277,7 @@ or bottom half).
unfreeze_fs: called when VFS is unlocking a filesystem and making it writable
again.
statfs: called when the VFS needs to get filesystem statistics. This
is called with the kernel lock held
statfs: called when the VFS needs to get filesystem statistics.
remount_fs: called when the filesystem is remounted. This is called
with the kernel lock held

View File

@ -0,0 +1,65 @@
BCM5974 Driver (bcm5974)
------------------------
Copyright (C) 2008-2009 Henrik Rydberg <rydberg@euromail.se>
The USB initialization and package decoding was made by Scott Shawcroft as
part of the touchd user-space driver project:
Copyright (C) 2008 Scott Shawcroft (scott.shawcroft@gmail.com)
The BCM5974 driver is based on the appletouch driver:
Copyright (C) 2001-2004 Greg Kroah-Hartman (greg@kroah.com)
Copyright (C) 2005 Johannes Berg (johannes@sipsolutions.net)
Copyright (C) 2005 Stelian Pop (stelian@popies.net)
Copyright (C) 2005 Frank Arnold (frank@scirocco-5v-turbo.de)
Copyright (C) 2005 Peter Osterlund (petero2@telia.com)
Copyright (C) 2005 Michael Hanselmann (linux-kernel@hansmi.ch)
Copyright (C) 2006 Nicolas Boichat (nicolas@boichat.ch)
This driver adds support for the multi-touch trackpad on the new Apple
Macbook Air and Macbook Pro laptops. It replaces the appletouch driver on
those computers, and integrates well with the synaptics driver of the Xorg
system.
Known to work on Macbook Air, Macbook Pro Penryn and the new unibody
Macbook 5 and Macbook Pro 5.
Usage
-----
The driver loads automatically for the supported usb device ids, and
becomes available both as an event device (/dev/input/event*) and as a
mouse via the mousedev driver (/dev/input/mice).
USB Race
--------
The Apple multi-touch trackpads report both mouse and keyboard events via
different interfaces of the same usb device. This creates a race condition
with the HID driver, which, if not told otherwise, will find the standard
HID mouse and keyboard, and claim the whole device. To remedy, the usb
product id must be listed in the mouse_ignore list of the hid driver.
Debug output
------------
To ease the development for new hardware version, verbose packet output can
be switched on with the debug kernel module parameter. The range [1-9]
yields different levels of verbosity. Example (as root):
echo -n 9 > /sys/module/bcm5974/parameters/debug
tail -f /var/log/debug
echo -n 0 > /sys/module/bcm5974/parameters/debug
Trivia
------
The driver was developed at the ubuntu forums in June 2008 [1], and now has
a more permanent home at bitmath.org [2].
Links
-----
[1] http://ubuntuforums.org/showthread.php?t=840040
[2] http://http://bitmath.org/code/

View File

@ -0,0 +1,140 @@
Multi-touch (MT) Protocol
-------------------------
Copyright (C) 2009 Henrik Rydberg <rydberg@euromail.se>
Introduction
------------
In order to utilize the full power of the new multi-touch devices, a way to
report detailed finger data to user space is needed. This document
describes the multi-touch (MT) protocol which allows kernel drivers to
report details for an arbitrary number of fingers.
Usage
-----
Anonymous finger details are sent sequentially as separate packets of ABS
events. Only the ABS_MT events are recognized as part of a finger
packet. The end of a packet is marked by calling the input_mt_sync()
function, which generates a SYN_MT_REPORT event. The end of multi-touch
transfer is marked by calling the usual input_sync() function.
A set of ABS_MT events with the desired properties is defined. The events
are divided into categories, to allow for partial implementation. The
minimum set consists of ABS_MT_TOUCH_MAJOR, ABS_MT_POSITION_X and
ABS_MT_POSITION_Y, which allows for multiple fingers to be tracked. If the
device supports it, the ABS_MT_WIDTH_MAJOR may be used to provide the size
of the approaching finger. Anisotropy and direction may be specified with
ABS_MT_TOUCH_MINOR, ABS_MT_WIDTH_MINOR and ABS_MT_ORIENTATION. Devices with
more granular information may specify general shapes as blobs, i.e., as a
sequence of rectangular shapes grouped together by an
ABS_MT_BLOB_ID. Finally, the ABS_MT_TOOL_TYPE may be used to specify
whether the touching tool is a finger or a pen or something else.
Event Semantics
---------------
The word "contact" is used to describe a tool which is in direct contact
with the surface. A finger, a pen or a rubber all classify as contacts.
ABS_MT_TOUCH_MAJOR
The length of the major axis of the contact. The length should be given in
surface units. If the surface has an X times Y resolution, the largest
possible value of ABS_MT_TOUCH_MAJOR is sqrt(X^2 + Y^2), the diagonal.
ABS_MT_TOUCH_MINOR
The length, in surface units, of the minor axis of the contact. If the
contact is circular, this event can be omitted.
ABS_MT_WIDTH_MAJOR
The length, in surface units, of the major axis of the approaching
tool. This should be understood as the size of the tool itself. The
orientation of the contact and the approaching tool are assumed to be the
same.
ABS_MT_WIDTH_MINOR
The length, in surface units, of the minor axis of the approaching
tool. Omit if circular.
The above four values can be used to derive additional information about
the contact. The ratio ABS_MT_TOUCH_MAJOR / ABS_MT_WIDTH_MAJOR approximates
the notion of pressure. The fingers of the hand and the palm all have
different characteristic widths [1].
ABS_MT_ORIENTATION
The orientation of the ellipse. The value should describe half a revolution
clockwise around the touch center. The scale of the value is arbitrary, but
zero should be returned for an ellipse aligned along the Y axis of the
surface. As an example, an index finger placed straight onto the axis could
return zero orientation, something negative when twisted to the left, and
something positive when twisted to the right. This value can be omitted if
the touching object is circular, or if the information is not available in
the kernel driver.
ABS_MT_POSITION_X
The surface X coordinate of the center of the touching ellipse.
ABS_MT_POSITION_Y
The surface Y coordinate of the center of the touching ellipse.
ABS_MT_TOOL_TYPE
The type of approaching tool. A lot of kernel drivers cannot distinguish
between different tool types, such as a finger or a pen. In such cases, the
event should be omitted. The protocol currently supports MT_TOOL_FINGER and
MT_TOOL_PEN [2].
ABS_MT_BLOB_ID
The BLOB_ID groups several packets together into one arbitrarily shaped
contact. This is a low-level anonymous grouping, and should not be confused
with the high-level contactID, explained below. Most kernel drivers will
not have this capability, and can safely omit the event.
Finger Tracking
---------------
The kernel driver should generate an arbitrary enumeration of the set of
anonymous contacts currently on the surface. The order in which the packets
appear in the event stream is not important.
The process of finger tracking, i.e., to assign a unique contactID to each
initiated contact on the surface, is left to user space; preferably the
multi-touch X driver [3]. In that driver, the contactID stays the same and
unique until the contact vanishes (when the finger leaves the surface). The
problem of assigning a set of anonymous fingers to a set of identified
fingers is a euclidian bipartite matching problem at each event update, and
relies on a sufficiently rapid update rate.
Notes
-----
In order to stay compatible with existing applications, the data
reported in a finger packet must not be recognized as single-touch
events. In addition, all finger data must bypass input filtering,
since subsequent events of the same type refer to different fingers.
The first kernel driver to utilize the MT protocol is the bcm5974 driver,
where examples can be found.
[1] With the extension ABS_MT_APPROACH_X and ABS_MT_APPROACH_Y, the
difference between the contact position and the approaching tool position
could be used to derive tilt.
[2] The list can of course be extended.
[3] The multi-touch X driver is currently in the prototyping stage. At the
time of writing (April 2009), the MT protocol is not yet merged, and the
prototype implements finger matching, basic mouse support and two-finger
scrolling. The project aims at improving the quality of current multi-touch
functionality available in the synaptics X driver, and in addition
implement more advanced gestures.

View File

@ -2,8 +2,14 @@
- this file (info on ISDN implementation for Linux)
CREDITS
- list of the kind folks that brought you this stuff.
HiSax.cert
- information about the ITU approval certification of the HiSax driver.
INTERFACE
- description of Linklevel and Hardwarelevel ISDN interface.
- description of isdn4linux Link Level and Hardware Level interfaces.
INTERFACE.fax
- description of the fax subinterface of isdn4linux.
INTERFACE.CAPI
- description of kernel CAPI Link Level to Hardware Level interface.
README
- general info on what you need and what to do for Linux ISDN.
README.FAQ
@ -12,6 +18,8 @@ README.audio
- info for running audio over ISDN.
README.fax
- info for using Fax over ISDN.
README.gigaset
- info on the drivers for Siemens Gigaset ISDN adapters.
README.icn
- info on the ICN-ISDN-card and its driver.
README.HiSax
@ -37,7 +45,8 @@ README.diversion
README.sc
- info on driver for Spellcaster cards.
README.x25
_ info for running X.25 over ISDN.
- info for running X.25 over ISDN.
README.hysdn
- info on driver for Hypercope active HYSDN cards
- info on driver for Hypercope active HYSDN cards
README.mISDN
- info on the Modular ISDN subsystem (mISDN).

View File

@ -0,0 +1,213 @@
Kernel CAPI Interface to Hardware Drivers
-----------------------------------------
1. Overview
From the CAPI 2.0 specification:
COMMON-ISDN-API (CAPI) is an application programming interface standard used
to access ISDN equipment connected to basic rate interfaces (BRI) and primary
rate interfaces (PRI).
Kernel CAPI operates as a dispatching layer between CAPI applications and CAPI
hardware drivers. Hardware drivers register ISDN devices (controllers, in CAPI
lingo) with Kernel CAPI to indicate their readiness to provide their service
to CAPI applications. CAPI applications also register with Kernel CAPI,
requesting association with a CAPI device. Kernel CAPI then dispatches the
application registration to an available device, forwarding it to the
corresponding hardware driver. Kernel CAPI then forwards CAPI messages in both
directions between the application and the hardware driver.
Format and semantics of CAPI messages are specified in the CAPI 2.0 standard.
This standard is freely available from http://www.capi.org.
2. Driver and Device Registration
CAPI drivers optionally register themselves with Kernel CAPI by calling the
Kernel CAPI function register_capi_driver() with a pointer to a struct
capi_driver. This structure must be filled with the name and revision of the
driver, and optionally a pointer to a callback function, add_card(). The
registration can be revoked by calling the function unregister_capi_driver()
with a pointer to the same struct capi_driver.
CAPI drivers must register each of the ISDN devices they control with Kernel
CAPI by calling the Kernel CAPI function attach_capi_ctr() with a pointer to a
struct capi_ctr before they can be used. This structure must be filled with
the names of the driver and controller, and a number of callback function
pointers which are subsequently used by Kernel CAPI for communicating with the
driver. The registration can be revoked by calling the function
detach_capi_ctr() with a pointer to the same struct capi_ctr.
Before the device can be actually used, the driver must fill in the device
information fields 'manu', 'version', 'profile' and 'serial' in the capi_ctr
structure of the device, and signal its readiness by calling capi_ctr_ready().
From then on, Kernel CAPI may call the registered callback functions for the
device.
If the device becomes unusable for any reason (shutdown, disconnect ...), the
driver has to call capi_ctr_reseted(). This will prevent further calls to the
callback functions by Kernel CAPI.
3. Application Registration and Communication
Kernel CAPI forwards registration requests from applications (calls to CAPI
operation CAPI_REGISTER) to an appropriate hardware driver by calling its
register_appl() callback function. A unique Application ID (ApplID, u16) is
allocated by Kernel CAPI and passed to register_appl() along with the
parameter structure provided by the application. This is analogous to the
open() operation on regular files or character devices.
After a successful return from register_appl(), CAPI messages from the
application may be passed to the driver for the device via calls to the
send_message() callback function. The CAPI message to send is stored in the
data portion of an skb. Conversely, the driver may call Kernel CAPI's
capi_ctr_handle_message() function to pass a received CAPI message to Kernel
CAPI for forwarding to an application, specifying its ApplID.
Deregistration requests (CAPI operation CAPI_RELEASE) from applications are
forwarded as calls to the release_appl() callback function, passing the same
ApplID as with register_appl(). After return from release_appl(), no CAPI
messages for that application may be passed to or from the device anymore.
4. Data Structures
4.1 struct capi_driver
This structure describes a Kernel CAPI driver itself. It is used in the
register_capi_driver() and unregister_capi_driver() functions, and contains
the following non-private fields, all to be set by the driver before calling
register_capi_driver():
char name[32]
the name of the driver, as a zero-terminated ASCII string
char revision[32]
the revision number of the driver, as a zero-terminated ASCII string
int (*add_card)(struct capi_driver *driver, capicardparams *data)
a callback function pointer (may be NULL)
4.2 struct capi_ctr
This structure describes an ISDN device (controller) handled by a Kernel CAPI
driver. After registration via the attach_capi_ctr() function it is passed to
all controller specific lower layer interface and callback functions to
identify the controller to operate on.
It contains the following non-private fields:
- to be set by the driver before calling attach_capi_ctr():
struct module *owner
pointer to the driver module owning the device
void *driverdata
an opaque pointer to driver specific data, not touched by Kernel CAPI
char name[32]
the name of the controller, as a zero-terminated ASCII string
char *driver_name
the name of the driver, as a zero-terminated ASCII string
int (*load_firmware)(struct capi_ctr *ctrlr, capiloaddata *ldata)
(optional) pointer to a callback function for sending firmware and
configuration data to the device
void (*reset_ctr)(struct capi_ctr *ctrlr)
pointer to a callback function for performing a reset on the device,
releasing all registered applications
void (*register_appl)(struct capi_ctr *ctrlr, u16 applid,
capi_register_params *rparam)
void (*release_appl)(struct capi_ctr *ctrlr, u16 applid)
pointers to callback functions for registration and deregistration of
applications with the device
u16 (*send_message)(struct capi_ctr *ctrlr, struct sk_buff *skb)
pointer to a callback function for sending a CAPI message to the
device
char *(*procinfo)(struct capi_ctr *ctrlr)
pointer to a callback function returning the entry for the device in
the CAPI controller info table, /proc/capi/controller
read_proc_t *ctr_read_proc
pointer to the read_proc callback function for the device's proc file
system entry, /proc/capi/controllers/<n>; will be called with a
pointer to the device's capi_ctr structure as the last (data) argument
- to be filled in before calling capi_ctr_ready():
u8 manu[CAPI_MANUFACTURER_LEN]
value to return for CAPI_GET_MANUFACTURER
capi_version version
value to return for CAPI_GET_VERSION
capi_profile profile
value to return for CAPI_GET_PROFILE
u8 serial[CAPI_SERIAL_LEN]
value to return for CAPI_GET_SERIAL
5. Lower Layer Interface Functions
(declared in <linux/isdn/capilli.h>)
void register_capi_driver(struct capi_driver *drvr)
void unregister_capi_driver(struct capi_driver *drvr)
register/unregister a driver with Kernel CAPI
int attach_capi_ctr(struct capi_ctr *ctrlr)
int detach_capi_ctr(struct capi_ctr *ctrlr)
register/unregister a device (controller) with Kernel CAPI
void capi_ctr_ready(struct capi_ctr *ctrlr)
void capi_ctr_reseted(struct capi_ctr *ctrlr)
signal controller ready/not ready
void capi_ctr_suspend_output(struct capi_ctr *ctrlr)
void capi_ctr_resume_output(struct capi_ctr *ctrlr)
signal suspend/resume
void capi_ctr_handle_message(struct capi_ctr * ctrlr, u16 applid,
struct sk_buff *skb)
pass a received CAPI message to Kernel CAPI
for forwarding to the specified application
6. Helper Functions and Macros
Library functions (from <linux/isdn/capilli.h>):
void capilib_new_ncci(struct list_head *head, u16 applid,
u32 ncci, u32 winsize)
void capilib_free_ncci(struct list_head *head, u16 applid, u32 ncci)
void capilib_release_appl(struct list_head *head, u16 applid)
void capilib_release(struct list_head *head)
void capilib_data_b3_conf(struct list_head *head, u16 applid,
u32 ncci, u16 msgid)
u16 capilib_data_b3_req(struct list_head *head, u16 applid,
u32 ncci, u16 msgid)
Macros to extract/set element values from/in a CAPI message header
(from <linux/isdn/capiutil.h>):
Get Macro Set Macro Element (Type)
CAPIMSG_LEN(m) CAPIMSG_SETLEN(m, len) Total Length (u16)
CAPIMSG_APPID(m) CAPIMSG_SETAPPID(m, applid) ApplID (u16)
CAPIMSG_COMMAND(m) CAPIMSG_SETCOMMAND(m,cmd) Command (u8)
CAPIMSG_SUBCOMMAND(m) CAPIMSG_SETSUBCOMMAND(m, cmd) Subcommand (u8)
CAPIMSG_CMD(m) - Command*256
+ Subcommand (u16)
CAPIMSG_MSGID(m) CAPIMSG_SETMSGID(m, msgid) Message Number (u16)
CAPIMSG_CONTROL(m) CAPIMSG_SETCONTROL(m, contr) Controller/PLCI/NCCI
(u32)
CAPIMSG_DATALEN(m) CAPIMSG_SETDATALEN(m, len) Data Length (u16)

View File

@ -269,7 +269,10 @@ Use the argument mechanism to document members or constants.
Inside a struct description, you can use the "private:" and "public:"
comment tags. Structure fields that are inside a "private:" area
are not listed in the generated output documentation.
are not listed in the generated output documentation. The "private:"
and "public:" tags must begin immediately following a "/*" comment
marker. They may optionally include comments between the ":" and the
ending "*/" marker.
Example:
@ -283,7 +286,7 @@ Example:
struct my_struct {
int a;
int b;
/* private: */
/* private: internal use only */
int c;
};

View File

@ -17,6 +17,12 @@ are specified on the kernel command line with the module name plus
usbcore.blinkenlights=1
Hyphens (dashes) and underscores are equivalent in parameter names, so
log_buf_len=1M print-fatal-signals=1
can also be entered as
log-buf-len=1M print_fatal_signals=1
This document may not be entirely up to date and comprehensive. The command
"modinfo -p ${modulename}" shows a current list of all parameters of a loadable
module. Loadable modules, after being loaded into the running kernel, also
@ -345,7 +351,7 @@ and is between 256 and 4096 characters. It is defined in the file
not play well with APC CPU idle - disable it if you have
APC and your system crashes randomly.
apic= [APIC,i386] Advanced Programmable Interrupt Controller
apic= [APIC,X86-32] Advanced Programmable Interrupt Controller
Change the output verbosity whilst booting
Format: { quiet (default) | verbose | debug }
Change the amount of debugging information output
@ -702,7 +708,7 @@ and is between 256 and 4096 characters. It is defined in the file
to discrete, to make X server driver able to add WB
entry later. This parameter enables that.
enable_timer_pin_1 [i386,x86-64]
enable_timer_pin_1 [X86]
Enable PIN 1 of APIC timer
Can be useful to work around chipset bugs
(in particular on some ATI chipsets).
@ -775,7 +781,7 @@ and is between 256 and 4096 characters. It is defined in the file
hashdist= [KNL,NUMA] Large hashes allocated during boot
are distributed across NUMA nodes. Defaults on
for IA-64, off otherwise.
for 64bit NUMA, off otherwise.
Format: 0 | 1 (for off | on)
hcl= [IA-64] SGI's Hardware Graph compatibility layer
@ -1620,6 +1626,8 @@ and is between 256 and 4096 characters. It is defined in the file
nowb [ARM]
nox2apic [X86-64,APIC] Do not enable x2APIC mode.
nptcg= [IA64] Override max number of concurrent global TLB
purges which is reported from either PAL_VM_SUMMARY or
SAL PALO.

View File

@ -1,7 +1,7 @@
ThinkPad ACPI Extras Driver
Version 0.22
November 23rd, 2008
Version 0.23
April 10th, 2009
Borislav Deianov <borislav@users.sf.net>
Henrique de Moraes Holschuh <hmh@hmh.eng.br>

View File

@ -54,9 +54,9 @@ locking error messages, inside curlies. A contrived example:
The bit position indicates STATE, STATE-read, for each of the states listed
above, and the character displayed in each indicates:
'.' acquired while irqs disabled
'+' acquired in irq context
'-' acquired with irqs enabled
'.' acquired while irqs disabled and not in irq context
'-' acquired in irq context
'+' acquired with irqs enabled
'?' acquired in irq context with irqs enabled.
Unused mutexes cannot be part of the cause of an error.

BIN
Documentation/logo.gif Normal file

Binary file not shown.

After

Width:  |  Height:  |  Size: 16 KiB

File diff suppressed because one or more lines are too long

Before

Width:  |  Height:  |  Size: 303 KiB

View File

@ -1,4 +1,13 @@
Tux is taking a three month sabbatical to work as a barber, so Tuz is
standing in. He's taken pains to ensure you'll hardly notice.
This is the full-colour version of the currently unofficial Linux logo
("currently unofficial" just means that there has been no paperwork and
that I have not really announced it yet). It was created by Larry Ewing,
and is freely usable as long as you acknowledge Larry as the original
artist.
Note that there are black-and-white versions of this available that
scale down to smaller sizes and are better for letterheads or whatever
you want to use it for: for the full range of logos take a look at
Larry's web-page:
http://www.isc.tamu.edu/~lewing/linux/
Image by Andrew McGown and Josh Bush. Image is licensed CC BY-SA.

View File

@ -43,12 +43,11 @@ Table of Contents
2) Representing devices without a current OF specification
a) PHY nodes
b) Interrupt controllers
c) CFI or JEDEC memory-mapped NOR flash
d) 4xx/Axon EMAC ethernet nodes
e) Xilinx IP cores
f) USB EHCI controllers
g) MDIO on GPIOs
h) SPI busses
c) 4xx/Axon EMAC ethernet nodes
d) Xilinx IP cores
e) USB EHCI controllers
f) MDIO on GPIOs
g) SPI busses
VII - Marvell Discovery mv64[345]6x System Controller chips
1) The /system-controller node
@ -999,7 +998,7 @@ compatibility.
translation of SOC addresses for memory mapped SOC registers.
- bus-frequency: Contains the bus frequency for the SOC node.
Typically, the value of this field is filled in by the boot
loader.
loader.
Recommended properties:
@ -1287,71 +1286,7 @@ platforms are moved over to use the flattened-device-tree model.
device_type = "open-pic";
};
c) CFI or JEDEC memory-mapped NOR flash
Flash chips (Memory Technology Devices) are often used for solid state
file systems on embedded devices.
- compatible : should contain the specific model of flash chip(s)
used, if known, followed by either "cfi-flash" or "jedec-flash"
- reg : Address range of the flash chip
- bank-width : Width (in bytes) of the flash bank. Equal to the
device width times the number of interleaved chips.
- device-width : (optional) Width of a single flash chip. If
omitted, assumed to be equal to 'bank-width'.
- #address-cells, #size-cells : Must be present if the flash has
sub-nodes representing partitions (see below). In this case
both #address-cells and #size-cells must be equal to 1.
For JEDEC compatible devices, the following additional properties
are defined:
- vendor-id : Contains the flash chip's vendor id (1 byte).
- device-id : Contains the flash chip's device id (1 byte).
In addition to the information on the flash bank itself, the
device tree may optionally contain additional information
describing partitions of the flash address space. This can be
used on platforms which have strong conventions about which
portions of the flash are used for what purposes, but which don't
use an on-flash partition table such as RedBoot.
Each partition is represented as a sub-node of the flash device.
Each node's name represents the name of the corresponding
partition of the flash device.
Flash partitions
- reg : The partition's offset and size within the flash bank.
- label : (optional) The label / name for this flash partition.
If omitted, the label is taken from the node name (excluding
the unit address).
- read-only : (optional) This parameter, if present, is a hint to
Linux that this flash partition should only be mounted
read-only. This is usually used for flash partitions
containing early-boot firmware images or data which should not
be clobbered.
Example:
flash@ff000000 {
compatible = "amd,am29lv128ml", "cfi-flash";
reg = <ff000000 01000000>;
bank-width = <4>;
device-width = <1>;
#address-cells = <1>;
#size-cells = <1>;
fs@0 {
label = "fs";
reg = <0 f80000>;
};
firmware@f80000 {
label ="firmware";
reg = <f80000 80000>;
read-only;
};
};
d) 4xx/Axon EMAC ethernet nodes
c) 4xx/Axon EMAC ethernet nodes
The EMAC ethernet controller in IBM and AMCC 4xx chips, and also
the Axon bridge. To operate this needs to interact with a ths
@ -1499,7 +1434,7 @@ platforms are moved over to use the flattened-device-tree model.
available.
For Axon: 0x0000012a
e) Xilinx IP cores
d) Xilinx IP cores
The Xilinx EDK toolchain ships with a set of IP cores (devices) for use
in Xilinx Spartan and Virtex FPGAs. The devices cover the whole range
@ -1761,7 +1696,7 @@ platforms are moved over to use the flattened-device-tree model.
listed above, nodes for these devices should include a phy-handle
property, and may include other common network device properties
like local-mac-address.
iv) Xilinx Uartlite
Xilinx uartlite devices are simple fixed speed serial ports.
@ -1793,7 +1728,7 @@ platforms are moved over to use the flattened-device-tree model.
- reg-offset : A value of 3 is required
- reg-shift : A value of 2 is required
f) USB EHCI controllers
e) USB EHCI controllers
Required properties:
- compatible : should be "usb-ehci".
@ -1819,7 +1754,7 @@ platforms are moved over to use the flattened-device-tree model.
big-endian;
};
g) MDIO on GPIOs
f) MDIO on GPIOs
Currently defined compatibles:
- virtual,gpio-mdio
@ -1839,7 +1774,7 @@ platforms are moved over to use the flattened-device-tree model.
&qe_pio_c 6>;
};
h) SPI (Serial Peripheral Interface) busses
g) SPI (Serial Peripheral Interface) busses
SPI busses can be described with a node for the SPI master device
and a set of child nodes for each SPI slave on the bus. For this

View File

@ -0,0 +1,80 @@
CFI or JEDEC memory-mapped NOR flash
Flash chips (Memory Technology Devices) are often used for solid state
file systems on embedded devices.
- compatible : should contain the specific model of flash chip(s)
used, if known, followed by either "cfi-flash" or "jedec-flash"
- reg : Address range(s) of the flash chip(s)
It's possible to (optionally) define multiple "reg" tuples so that
non-identical NOR chips can be described in one flash node.
- bank-width : Width (in bytes) of the flash bank. Equal to the
device width times the number of interleaved chips.
- device-width : (optional) Width of a single flash chip. If
omitted, assumed to be equal to 'bank-width'.
- #address-cells, #size-cells : Must be present if the flash has
sub-nodes representing partitions (see below). In this case
both #address-cells and #size-cells must be equal to 1.
For JEDEC compatible devices, the following additional properties
are defined:
- vendor-id : Contains the flash chip's vendor id (1 byte).
- device-id : Contains the flash chip's device id (1 byte).
In addition to the information on the flash bank itself, the
device tree may optionally contain additional information
describing partitions of the flash address space. This can be
used on platforms which have strong conventions about which
portions of the flash are used for what purposes, but which don't
use an on-flash partition table such as RedBoot.
Each partition is represented as a sub-node of the flash device.
Each node's name represents the name of the corresponding
partition of the flash device.
Flash partitions
- reg : The partition's offset and size within the flash bank.
- label : (optional) The label / name for this flash partition.
If omitted, the label is taken from the node name (excluding
the unit address).
- read-only : (optional) This parameter, if present, is a hint to
Linux that this flash partition should only be mounted
read-only. This is usually used for flash partitions
containing early-boot firmware images or data which should not
be clobbered.
Example:
flash@ff000000 {
compatible = "amd,am29lv128ml", "cfi-flash";
reg = <ff000000 01000000>;
bank-width = <4>;
device-width = <1>;
#address-cells = <1>;
#size-cells = <1>;
fs@0 {
label = "fs";
reg = <0 f80000>;
};
firmware@f80000 {
label ="firmware";
reg = <f80000 80000>;
read-only;
};
};
Here an example with multiple "reg" tuples:
flash@f0000000,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "intel,PC48F4400P0VB", "cfi-flash";
reg = <0 0x00000000 0x02000000
0 0x02000000 0x02000000>;
bank-width = <2>;
partition@0 {
label = "test-part1";
reg = <0 0x04000000>;
};
};

View File

@ -511,10 +511,16 @@ SPI MASTER METHODS
This sets up the device clock rate, SPI mode, and word sizes.
Drivers may change the defaults provided by board_info, and then
call spi_setup(spi) to invoke this routine. It may sleep.
Unless each SPI slave has its own configuration registers, don't
change them right away ... otherwise drivers could corrupt I/O
that's in progress for other SPI devices.
** BUG ALERT: for some reason the first version of
** many spi_master drivers seems to get this wrong.
** When you code setup(), ASSUME that the controller
** is actively processing transfers for another device.
master->transfer(struct spi_device *spi, struct spi_message *message)
This must not sleep. Its responsibility is arrange that the
transfer happens and its complete() callback is issued. The two

View File

@ -90,6 +90,10 @@ will itself start writeback.
If dirty_bytes is written, dirty_ratio becomes a function of its value
(dirty_bytes / the amount of dirtyable system memory).
Note: the minimum value allowed for dirty_bytes is two pages (in bytes); any
value lower than this limit will be ignored and the old configuration will be
retained.
==============================================================
dirty_expire_centisecs

View File

@ -1337,12 +1337,9 @@ L: cbe-oss-dev@ozlabs.org
W: http://www.ibm.com/developerworks/power/cell/
S: Supported
F: arch/powerpc/include/asm/cell*.h
F: arch/powerpc/include/asm/lv1call.h
F: arch/powerpc/include/asm/ps3*.h
F: arch/powerpc/include/asm/spu*.h
F: arch/powerpc/oprofile/*cell*
F: arch/powerpc/platforms/cell/
F: arch/powerpc/platforms/ps3/
CERTIFIED WIRELESS USB (WUSB) SUBSYSTEM:
P: David Vrabel
@ -2065,6 +2062,8 @@ F: drivers/infiniband/hw/ehca/
EMBEDDED LINUX
P: Paul Gortmaker
M: paul.gortmaker@windriver.com
P: Matt Mackall
M: mpm@selenic.com
P: David Woodhouse
M: dwmw2@infradead.org
L: linux-embedded@vger.kernel.org
@ -2562,7 +2561,6 @@ F: kernel/power/
F: include/linux/suspend.h
F: include/linux/freezer.h
F: include/linux/pm.h
F: include/asm-*/suspend*.h
F: arch/*/include/asm/suspend*.h
HID CORE LAYER
@ -2760,7 +2758,7 @@ IDE SUBSYSTEM
P: Bartlomiej Zolnierkiewicz
M: bzolnier@gmail.com
L: linux-ide@vger.kernel.org
T: quilt kernel.org/pub/linux/kernel/people/bart/pata-2.6/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6.git
S: Maintained
F: Documentation/ide/
F: drivers/ide/
@ -3340,7 +3338,7 @@ P: Eduard - Gabriel Munteanu
M: eduard.munteanu@linux360.ro
L: linux-kernel@vger.kernel.org
S: Maintained
F: Documentation/vm/kmemtrace.txt
F: Documentation/trace/kmemtrace.txt
F: include/trace/kmemtrace.h
F: kernel/trace/kmemtrace.c
@ -3436,11 +3434,10 @@ L: linuxppc-dev@ozlabs.org
S: Maintained
LINUX FOR POWERPC EMBEDDED MPC5XXX
P: Sylvain Munaut
M: tnt@246tNt.com
P: Grant Likely
M: grant.likely@secretlab.ca
L: linuxppc-dev@ozlabs.org
T: git git://git.secretlab.ca/git/linux-2.6.git
S: Maintained
LINUX FOR POWERPC EMBEDDED PPC4XX
@ -3450,7 +3447,7 @@ P: Matt Porter
M: mporter@kernel.crashing.org
W: http://www.penguinppc.org/
L: linuxppc-dev@ozlabs.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/jwboyer/powerpc.git
T: git git://git.kernel.org/pub/scm/linux/kernel/git/jwboyer/powerpc-4xx.git
S: Maintained
LINUX FOR POWERPC EMBEDDED XILINX VIRTEX
@ -3458,6 +3455,7 @@ P: Grant Likely
M: grant.likely@secretlab.ca
W: http://wiki.secretlab.ca/index.php/Linux_on_Xilinx_Virtex
L: linuxppc-dev@ozlabs.org
T: git git://git.secretlab.ca/git/linux-2.6.git
S: Maintained
LINUX FOR POWERPC EMBEDDED PPC8XX
@ -3993,8 +3991,8 @@ NETWORKING [GENERAL]
P: David S. Miller
M: davem@davemloft.net
L: netdev@vger.kernel.org
W: http://linux-net.osdl.org/
T: git kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6.git
W: http://www.linuxfoundation.org/en/Net
T: git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6.git
S: Maintained
F: net/
F: include/net/
@ -4035,6 +4033,13 @@ F: net/wireless/
F: include/net/ieee80211*
F: include/net/wireless.h
NETWORKING DRIVERS
L: netdev@vger.kernel.org
W: http://www.linuxfoundation.org/en/Net
T: git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6.git
S: Odd Fixes
F: drivers/net/
NETXEN (1/10) GbE SUPPORT
P: Dhananjay Phadke
M: dhananjay@netxen.com
@ -4184,7 +4189,7 @@ P: Joel Becker
M: joel.becker@oracle.com
L: ocfs2-devel@oss.oracle.com (moderated for non-subscribers)
W: http://oss.oracle.com/projects/ocfs2/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2.git
T: git git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2.git
S: Supported
F: Documentation/filesystems/ocfs2.txt
F: Documentation/filesystems/dlmfs.txt
@ -4506,7 +4511,9 @@ F: arch/powerpc/include/asm/ps3*.h
F: arch/powerpc/platforms/ps3/
F: drivers/*/ps3*
F: drivers/ps3/
F: drivers/rtc/rtc-ps3.c
F: drivers/usb/host/*ps3.c
F: sound/ppc/snd_ps3*
PS3VRAM DRIVER
P: Jim Paris
@ -4514,6 +4521,19 @@ M: jim@jtan.com
L: cbe-oss-dev@ozlabs.org
S: Maintained
PTRACE SUPPORT
P: Roland McGrath
M: roland@redhat.com
P: Oleg Nesterov
M: oleg@redhat.com
L: linux-kernel@vger.kernel.org
S: Maintained
F: include/asm-generic/syscall.h
F: include/linux/ptrace.h
F: include/linux/regset.h
F: include/linux/tracehook.h
F: kernel/ptrace.c
PVRUSB2 VIDEO4LINUX DRIVER
P: Mike Isely
M: isely@pobox.com
@ -4659,13 +4679,13 @@ F: kernel/rcutorture.c
RDC R-321X SoC
P: Florian Fainelli
M: florian.fainelli@telecomint.eu
M: florian@openwrt.org
L: linux-kernel@vger.kernel.org
S: Maintained
RDC R6040 FAST ETHERNET DRIVER
P: Florian Fainelli
M: florian.fainelli@telecomint.eu
M: florian@openwrt.org
L: netdev@vger.kernel.org
S: Maintained
F: drivers/net/r6040.c
@ -5404,7 +5424,6 @@ F: kernel/power/
F: include/linux/suspend.h
F: include/linux/freezer.h
F: include/linux/pm.h
F: include/asm-*/suspend.h
SVGA HANDLING
P: Martin Mares
@ -5638,7 +5657,7 @@ L: uclinux-dev@uclinux.org (subscribers-only)
S: Maintained
F: arch/m68knommu/
UCLINUX FOR RENESAS H8/300
UCLINUX FOR RENESAS H8/300 (H8300)
P: Yoshinori Sato
M: ysato@users.sourceforge.jp
W: http://uclinux-h8.sourceforge.jp/

View File

@ -1,8 +1,8 @@
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 30
EXTRAVERSION = -rc2
NAME = Temporary Tasmanian Devil
EXTRAVERSION = -rc5
NAME = Vindictive Armadillo
# *DOCUMENTATION*
# To see a list of typical targets execute "make help"
@ -1293,7 +1293,7 @@ help:
@echo ' dir/ - Build all files in dir and below'
@echo ' dir/file.[ois] - Build specified target only'
@echo ' dir/file.ko - Build module including final link'
@echo ' prepare - Set up for building external modules'
@echo ' modules_prepare - Set up for building external modules'
@echo ' tags/TAGS - Generate tags file for editors'
@echo ' cscope - Generate cscope index'
@echo ' kernelrelease - Output the release version string'
@ -1421,7 +1421,9 @@ $(clean-dirs):
$(Q)$(MAKE) $(clean)=$(patsubst _clean_%,%,$@)
clean: rm-dirs := $(MODVERDIR)
clean: rm-files := $(KBUILD_EXTMOD)/Module.symvers
clean: rm-files := $(KBUILD_EXTMOD)/Module.symvers \
$(KBUILD_EXTMOD)/Module.markers \
$(KBUILD_EXTMOD)/modules.order
clean: $(clean-dirs)
$(call cmd,rmdirs)
$(call cmd,rmfiles)

View File

@ -16,11 +16,13 @@ __asm__ __volatile__("wmb": : :"memory")
__asm__ __volatile__("mb": : :"memory")
#ifdef CONFIG_SMP
#define __ASM_SMP_MB "\tmb\n"
#define smp_mb() mb()
#define smp_rmb() rmb()
#define smp_wmb() wmb()
#define smp_read_barrier_depends() read_barrier_depends()
#else
#define __ASM_SMP_MB
#define smp_mb() barrier()
#define smp_rmb() barrier()
#define smp_wmb() barrier()

View File

@ -1,6 +1,116 @@
#ifndef _ASM_FUTEX_H
#define _ASM_FUTEX_H
#ifndef _ASM_ALPHA_FUTEX_H
#define _ASM_ALPHA_FUTEX_H
#include <asm-generic/futex.h>
#ifdef __KERNEL__
#endif
#include <linux/futex.h>
#include <linux/uaccess.h>
#include <asm/errno.h>
#include <asm/barrier.h>
#define __futex_atomic_op(insn, ret, oldval, uaddr, oparg) \
__asm__ __volatile__( \
__ASM_SMP_MB \
"1: ldl_l %0,0(%2)\n" \
insn \
"2: stl_c %1,0(%2)\n" \
" beq %1,4f\n" \
" mov $31,%1\n" \
"3: .subsection 2\n" \
"4: br 1b\n" \
" .previous\n" \
" .section __ex_table,\"a\"\n" \
" .long 1b-.\n" \
" lda $31,3b-1b(%1)\n" \
" .long 2b-.\n" \
" lda $31,3b-2b(%1)\n" \
" .previous\n" \
: "=&r" (oldval), "=&r"(ret) \
: "r" (uaddr), "r"(oparg) \
: "memory")
static inline int futex_atomic_op_inuser (int encoded_op, int __user *uaddr)
{
int op = (encoded_op >> 28) & 7;
int cmp = (encoded_op >> 24) & 15;
int oparg = (encoded_op << 8) >> 20;
int cmparg = (encoded_op << 20) >> 20;
int oldval = 0, ret;
if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28))
oparg = 1 << oparg;
if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int)))
return -EFAULT;
pagefault_disable();
switch (op) {
case FUTEX_OP_SET:
__futex_atomic_op("mov %3,%1\n", ret, oldval, uaddr, oparg);
break;
case FUTEX_OP_ADD:
__futex_atomic_op("addl %0,%3,%1\n", ret, oldval, uaddr, oparg);
break;
case FUTEX_OP_OR:
__futex_atomic_op("or %0,%3,%1\n", ret, oldval, uaddr, oparg);
break;
case FUTEX_OP_ANDN:
__futex_atomic_op("andnot %0,%3,%1\n", ret, oldval, uaddr, oparg);
break;
case FUTEX_OP_XOR:
__futex_atomic_op("xor %0,%3,%1\n", ret, oldval, uaddr, oparg);
break;
default:
ret = -ENOSYS;
}
pagefault_enable();
if (!ret) {
switch (cmp) {
case FUTEX_OP_CMP_EQ: ret = (oldval == cmparg); break;
case FUTEX_OP_CMP_NE: ret = (oldval != cmparg); break;
case FUTEX_OP_CMP_LT: ret = (oldval < cmparg); break;
case FUTEX_OP_CMP_GE: ret = (oldval >= cmparg); break;
case FUTEX_OP_CMP_LE: ret = (oldval <= cmparg); break;
case FUTEX_OP_CMP_GT: ret = (oldval > cmparg); break;
default: ret = -ENOSYS;
}
}
return ret;
}
static inline int
futex_atomic_cmpxchg_inatomic(int __user *uaddr, int oldval, int newval)
{
int prev, cmp;
if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int)))
return -EFAULT;
__asm__ __volatile__ (
__ASM_SMP_MB
"1: ldl_l %0,0(%2)\n"
" cmpeq %0,%3,%1\n"
" beq %1,3f\n"
" mov %4,%1\n"
"2: stl_c %1,0(%2)\n"
" beq %1,4f\n"
"3: .subsection 2\n"
"4: br 1b\n"
" .previous\n"
" .section __ex_table,\"a\"\n"
" .long 1b-.\n"
" lda $31,3b-1b(%0)\n"
" .long 2b-.\n"
" lda $31,3b-2b(%0)\n"
" .previous\n"
: "=&r"(prev), "=&r"(cmp)
: "r"(uaddr), "r"((long)oldval), "r"(newval)
: "memory");
return prev;
}
#endif /* __KERNEL__ */
#endif /* _ASM_ALPHA_FUTEX_H */

View File

@ -73,6 +73,6 @@ extern unsigned long __per_cpu_offset[NR_CPUS];
#endif /* SMP */
#define DECLARE_PER_CPU(type, name) extern __typeof__(type) per_cpu_var(name)
#include <asm-generic/percpu.h>
#endif /* __ALPHA_PERCPU_H */

View File

@ -507,5 +507,7 @@ struct exception_table_entry
(pc) + (_fixup)->fixup.bits.nextinsn; \
})
#define ARCH_HAS_SORT_EXTABLE
#define ARCH_HAS_SEARCH_EXTABLE
#endif /* __ALPHA_UACCESS_H */

View File

@ -8,7 +8,7 @@ EXTRA_CFLAGS := -Werror -Wno-sign-compare
obj-y := entry.o traps.o process.o init_task.o osf_sys.o irq.o \
irq_alpha.o signal.o setup.o ptrace.o time.o \
alpha_ksyms.o systbls.o err_common.o io.o binfmt_loader.o
alpha_ksyms.o systbls.o err_common.o io.o
obj-$(CONFIG_VGA_HOSE) += console.o
obj-$(CONFIG_SMP) += smp.o
@ -43,6 +43,10 @@ else
# Misc support
obj-$(CONFIG_ALPHA_SRM) += srmcons.o
ifdef CONFIG_BINFMT_AOUT
obj-y += binfmt_loader.o
endif
# Core logic support
obj-$(CONFIG_ALPHA_APECS) += core_apecs.o
obj-$(CONFIG_ALPHA_CIA) += core_cia.o

View File

@ -46,6 +46,6 @@ static struct linux_binfmt loader_format = {
static int __init init_loader_binfmt(void)
{
return register_binfmt(&loader_format);
return insert_binfmt(&loader_format);
}
arch_initcall(init_loader_binfmt);

View File

@ -229,7 +229,7 @@ ev6_process_logout_frame(struct el_common *mchk_header, int print)
}
void
ev6_machine_check(u64 vector, u64 la_ptr)
ev6_machine_check(unsigned long vector, unsigned long la_ptr)
{
struct el_common *mchk_header = (struct el_common *)la_ptr;

View File

@ -117,7 +117,7 @@ ev7_collect_logout_frame_subpackets(struct el_subpacket *el_ptr,
}
void
ev7_machine_check(u64 vector, u64 la_ptr)
ev7_machine_check(unsigned long vector, unsigned long la_ptr)
{
struct el_subpacket *el_ptr = (struct el_subpacket *)la_ptr;
char *saved_err_prefix = err_print_prefix;
@ -246,7 +246,7 @@ ev7_process_pal_subpacket(struct el_subpacket *header)
switch(header->type) {
case EL_TYPE__PAL__LOGOUT_FRAME:
printk("%s*** MCHK occurred on LPID %ld (RBOX %llx)\n",
printk("%s*** MCHK occurred on LPID %lld (RBOX %llx)\n",
err_print_prefix,
packet->by_type.logout.whami,
packet->by_type.logout.rbox_whami);

View File

@ -60,26 +60,26 @@ extern struct ev7_lf_subpackets *
ev7_collect_logout_frame_subpackets(struct el_subpacket *,
struct ev7_lf_subpackets *);
extern void ev7_register_error_handlers(void);
extern void ev7_machine_check(u64, u64);
extern void ev7_machine_check(unsigned long, unsigned long);
/*
* err_ev6.c
*/
extern void ev6_register_error_handlers(void);
extern int ev6_process_logout_frame(struct el_common *, int);
extern void ev6_machine_check(u64, u64);
extern void ev6_machine_check(unsigned long, unsigned long);
/*
* err_marvel.c
*/
extern void marvel_machine_check(u64, u64);
extern void marvel_machine_check(unsigned long, unsigned long);
extern void marvel_register_error_handlers(void);
/*
* err_titan.c
*/
extern int titan_process_logout_frame(struct el_common *, int);
extern void titan_machine_check(u64, u64);
extern void titan_machine_check(unsigned long, unsigned long);
extern void titan_register_error_handlers(void);
extern int privateer_process_logout_frame(struct el_common *, int);
extern void privateer_machine_check(u64, u64);
extern void privateer_machine_check(unsigned long, unsigned long);

View File

@ -1042,7 +1042,7 @@ marvel_process_logout_frame(struct ev7_lf_subpackets *lf_subpackets, int print)
}
void
marvel_machine_check(u64 vector, u64 la_ptr)
marvel_machine_check(unsigned long vector, unsigned long la_ptr)
{
struct el_subpacket *el_ptr = (struct el_subpacket *)la_ptr;
int (*process_frame)(struct ev7_lf_subpackets *, int) = NULL;

View File

@ -380,7 +380,7 @@ titan_process_logout_frame(struct el_common *mchk_header, int print)
}
void
titan_machine_check(u64 vector, u64 la_ptr)
titan_machine_check(unsigned long vector, unsigned long la_ptr)
{
struct el_common *mchk_header = (struct el_common *)la_ptr;
struct el_TITAN_sysdata_mcheck *tmchk =
@ -702,7 +702,7 @@ privateer_process_logout_frame(struct el_common *mchk_header, int print)
}
void
privateer_machine_check(u64 vector, u64 la_ptr)
privateer_machine_check(unsigned long vector, unsigned long la_ptr)
{
struct el_common *mchk_header = (struct el_common *)la_ptr;
struct el_TITAN_sysdata_mcheck *tmchk =

View File

@ -7,10 +7,11 @@
* the kernel global pointer and jump to the kernel entry-point.
*/
#include <linux/init.h>
#include <asm/system.h>
#include <asm/asm-offsets.h>
.section .text.head, "ax"
__HEAD
.globl swapper_pg_dir
.globl _stext
swapper_pg_dir=SWAPPER_PGD

View File

@ -36,7 +36,6 @@ extern void cia_pci_tbi(struct pci_controller *, dma_addr_t, dma_addr_t);
extern struct pci_ops irongate_pci_ops;
extern int irongate_pci_clr_err(void);
extern void irongate_init_arch(void);
extern void irongate_machine_check(u64, u64);
#define irongate_pci_tbi ((void *)0)
/* core_lca.c */
@ -49,7 +48,7 @@ extern void lca_pci_tbi(struct pci_controller *, dma_addr_t, dma_addr_t);
extern struct pci_ops marvel_pci_ops;
extern void marvel_init_arch(void);
extern void marvel_kill_arch(int);
extern void marvel_machine_check(u64, u64);
extern void marvel_machine_check(unsigned long, unsigned long);
extern void marvel_pci_tbi(struct pci_controller *, dma_addr_t, dma_addr_t);
extern int marvel_pa_to_nid(unsigned long);
extern int marvel_cpuid_to_nid(int);
@ -86,7 +85,7 @@ extern void t2_pci_tbi(struct pci_controller *, dma_addr_t, dma_addr_t);
extern struct pci_ops titan_pci_ops;
extern void titan_init_arch(void);
extern void titan_kill_arch(int);
extern void titan_machine_check(u64, u64);
extern void titan_machine_check(unsigned long, unsigned long);
extern void titan_pci_tbi(struct pci_controller *, dma_addr_t, dma_addr_t);
extern struct _alpha_agp_info *titan_agp_info(void);

View File

@ -16,7 +16,7 @@ SECTIONS
_text = .; /* Text and read-only data */
.text : {
*(.text.head)
HEAD_TEXT
TEXT_TEXT
SCHED_TEXT
LOCK_TEXT

View File

@ -3,11 +3,49 @@
*/
#include <linux/module.h>
#include <linux/sort.h>
#include <asm/uaccess.h>
static inline unsigned long ex_to_addr(const struct exception_table_entry *x)
{
return (unsigned long)&x->insn + x->insn;
}
static void swap_ex(void *a, void *b, int size)
{
struct exception_table_entry *ex_a = a, *ex_b = b;
unsigned long addr_a = ex_to_addr(ex_a), addr_b = ex_to_addr(ex_b);
unsigned int t = ex_a->fixup.unit;
ex_a->fixup.unit = ex_b->fixup.unit;
ex_b->fixup.unit = t;
ex_a->insn = (int)(addr_b - (unsigned long)&ex_a->insn);
ex_b->insn = (int)(addr_a - (unsigned long)&ex_b->insn);
}
/*
* The exception table needs to be sorted so that the binary
* search that we use to find entries in it works properly.
* This is used both for the kernel exception table and for
* the exception tables of modules that get loaded.
*/
static int cmp_ex(const void *a, const void *b)
{
const struct exception_table_entry *x = a, *y = b;
/* avoid overflow */
if (ex_to_addr(x) > ex_to_addr(y))
return 1;
if (ex_to_addr(x) < ex_to_addr(y))
return -1;
return 0;
}
void sort_extable(struct exception_table_entry *start,
struct exception_table_entry *finish)
{
sort(start, finish - start, sizeof(struct exception_table_entry),
cmp_ex, swap_ex);
}
const struct exception_table_entry *
@ -20,7 +58,7 @@ search_extable(const struct exception_table_entry *first,
unsigned long mid_value;
mid = (last - first) / 2 + first;
mid_value = (unsigned long)&mid->insn + mid->insn;
mid_value = ex_to_addr(mid);
if (mid_value == value)
return mid;
else if (mid_value < value)

View File

@ -454,6 +454,7 @@ config ARCH_MXC
select ARCH_MTD_XIP
select GENERIC_GPIO
select ARCH_REQUIRE_GPIOLIB
select HAVE_CLK
help
Support for Freescale MXC/iMX-based family of processors
@ -486,8 +487,6 @@ config ARCH_PXA
select HAVE_CLK
select COMMON_CLKDEV
select ARCH_REQUIRE_GPIOLIB
select HAVE_CLK
select COMMON_CLKDEV
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
select TICK_ONESHOT
@ -585,6 +584,8 @@ config ARCH_DAVINCI
select ARCH_REQUIRE_GPIOLIB
select HAVE_CLK
select ZONE_DMA
select HAVE_IDE
select COMMON_CLKDEV
help
Support for TI's DaVinci platform.
@ -740,6 +741,56 @@ if !MMU
source "arch/arm/Kconfig-nommu"
endif
config ARM_ERRATA_411920
bool "ARM errata: Invalidation of the Instruction Cache operation can fail"
depends on CPU_V6 && !SMP
help
Invalidation of the Instruction Cache operation can
fail. This erratum is present in 1136 (before r1p4), 1156 and 1176.
It does not affect the MPCore. This option enables the ARM Ltd.
recommended workaround.
config ARM_ERRATA_430973
bool "ARM errata: Stale prediction on replaced interworking branch"
depends on CPU_V7
help
This option enables the workaround for the 430973 Cortex-A8
(r1p0..r1p2) erratum. If a code sequence containing an ARM/Thumb
interworking branch is replaced with another code sequence at the
same virtual address, whether due to self-modifying code or virtual
to physical address re-mapping, Cortex-A8 does not recover from the
stale interworking branch prediction. This results in Cortex-A8
executing the new code sequence in the incorrect ARM or Thumb state.
The workaround enables the BTB/BTAC operations by setting ACTLR.IBE
and also flushes the branch target cache at every context switch.
Note that setting specific bits in the ACTLR register may not be
available in non-secure mode.
config ARM_ERRATA_458693
bool "ARM errata: Processor deadlock when a false hazard is created"
depends on CPU_V7
help
This option enables the workaround for the 458693 Cortex-A8 (r2p0)
erratum. For very specific sequences of memory operations, it is
possible for a hazard condition intended for a cache line to instead
be incorrectly associated with a different cache line. This false
hazard might then cause a processor deadlock. The workaround enables
the L1 caching of the NEON accesses and disables the PLD instruction
in the ACTLR register. Note that setting specific bits in the ACTLR
register may not be available in non-secure mode.
config ARM_ERRATA_460075
bool "ARM errata: Data written to the L2 cache can be overwritten with stale data"
depends on CPU_V7
help
This option enables the workaround for the 460075 Cortex-A8 (r2p0)
erratum. Any asynchronous access to the L2 cache may encounter a
situation in which recent store transactions to the L2 cache are lost
and overwritten with stale memory contents from external memory. The
workaround disables the write-allocate mode for the L2 cache via the
ACTLR register. Note that setting specific bits in the ACTLR register
may not be available in non-secure mode.
endmenu
source "arch/arm/common/Kconfig"
@ -1171,12 +1222,6 @@ config CPU_FREQ_IMX
If in doubt, say N.
config CPU_FREQ_PXA
bool
depends on CPU_FREQ && ARCH_PXA && PXA25x
default y
select CPU_FREQ_DEFAULT_GOV_USERSPACE
endif
source "drivers/cpuidle/Kconfig"

File diff suppressed because it is too large Load Diff

View File

@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.29-rc5
# Tue Mar 3 21:45:57 2009
# Linux kernel version: 2.6.30-rc4
# Mon May 4 11:58:57 2009
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@ -66,20 +66,20 @@ CONFIG_NAMESPACES=y
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
@ -89,6 +89,7 @@ CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
@ -101,6 +102,7 @@ CONFIG_KPROBES=y
CONFIG_KRETPROBES=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
@ -113,7 +115,6 @@ CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@ -142,6 +143,7 @@ CONFIG_DEFAULT_IOSCHED="cfq"
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
# CONFIG_ARCH_GEMINI is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_H720X is not set
@ -162,6 +164,7 @@ CONFIG_ARCH_KIRKWOOD=y
# CONFIG_ARCH_ORION5X is not set
# CONFIG_ARCH_PNX4008 is not set
# CONFIG_ARCH_PXA is not set
# CONFIG_ARCH_MMP is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C2410 is not set
@ -217,6 +220,7 @@ CONFIG_PCI_SYSCALL=y
CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
#
@ -237,6 +241,7 @@ CONFIG_AEABI=y
CONFIG_ARCH_FLATMEM_HAS_HOLES=y
# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
# CONFIG_HIGHMEM is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
@ -249,6 +254,8 @@ CONFIG_SPLIT_PTLOCK_CPUS=4096
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_ALIGNMENT_TRAP=y
#
@ -293,7 +300,6 @@ CONFIG_NET=y
#
# Networking options
#
CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
@ -324,7 +330,7 @@ CONFIG_IP_PNP_BOOTP=y
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
CONFIG_INET_LRO=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
@ -357,6 +363,7 @@ CONFIG_NET_DSA_MV88E6123_61_65=y
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
@ -365,20 +372,20 @@ CONFIG_NET_DSA_MV88E6123_61_65=y
#
CONFIG_NET_PKTGEN=m
# CONFIG_NET_TCPPROBE is not set
# CONFIG_NET_DROP_MONITOR is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
CONFIG_CFG80211=y
# CONFIG_CFG80211_REG_DEBUG is not set
# CONFIG_NL80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
CONFIG_WIRELESS_EXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
CONFIG_LIB80211=y
# CONFIG_LIB80211_DEBUG is not set
CONFIG_MAC80211=y
#
@ -513,7 +520,6 @@ CONFIG_MTD_NAND_ORION=y
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
@ -592,8 +598,10 @@ CONFIG_SCSI_LOWLEVEL=y
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_LIBFC is not set
# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
@ -614,6 +622,7 @@ CONFIG_SCSI_LOWLEVEL=y
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_SATA_PMP=y
@ -687,6 +696,7 @@ CONFIG_SATA_MV=y
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@ -724,8 +734,10 @@ CONFIG_MII=y
# CONFIG_SMC91X is not set
# CONFIG_DM9000 is not set
# CONFIG_ENC28J60 is not set
# CONFIG_ETHOC is not set
# CONFIG_SMC911X is not set
# CONFIG_SMSC911X is not set
# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
@ -763,6 +775,7 @@ CONFIG_NETDEV_1000=y
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
@ -777,6 +790,7 @@ CONFIG_MV643XX_ETH=y
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_ATL1C is not set
# CONFIG_JME is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
@ -789,10 +803,11 @@ CONFIG_WLAN_80211=y
CONFIG_LIBERTAS=y
# CONFIG_LIBERTAS_USB is not set
CONFIG_LIBERTAS_SDIO=y
# CONFIG_LIBERTAS_SPI is not set
# CONFIG_LIBERTAS_DEBUG is not set
# CONFIG_LIBERTAS_THINFIRM is not set
# CONFIG_HERMES is not set
# CONFIG_ATMEL is not set
# CONFIG_AT76C50X_USB is not set
# CONFIG_PRISM54 is not set
# CONFIG_USB_ZD1201 is not set
# CONFIG_USB_NET_RNDIS_WLAN is not set
@ -800,20 +815,20 @@ CONFIG_LIBERTAS_SDIO=y
# CONFIG_RTL8187 is not set
# CONFIG_ADM8211 is not set
# CONFIG_MAC80211_HWSIM is not set
# CONFIG_MWL8K is not set
# CONFIG_P54_COMMON is not set
# CONFIG_ATH5K is not set
# CONFIG_ATH9K is not set
# CONFIG_AR9170_USB is not set
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not set
# CONFIG_IWLCORE is not set
# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_IWLAGN is not set
# CONFIG_IWL3945 is not set
# CONFIG_IWLWIFI is not set
# CONFIG_HOSTAP is not set
# CONFIG_B43 is not set
# CONFIG_B43LEGACY is not set
# CONFIG_ZD1211RW is not set
# CONFIG_RT2X00 is not set
# CONFIG_HERMES is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@ -908,6 +923,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=2
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_MAX3100 is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
@ -982,7 +998,6 @@ CONFIG_I2C_MV64XXX=y
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
@ -1082,15 +1097,17 @@ CONFIG_USB_HID=y
#
# Special HID drivers
#
CONFIG_HID_COMPAT=y
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
# CONFIG_DRAGONRISE_FF is not set
CONFIG_HID_EZKEY=y
CONFIG_HID_KYE=y
CONFIG_HID_GYRATION=y
CONFIG_HID_KENSINGTON=y
CONFIG_HID_LOGITECH=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
@ -1152,11 +1169,11 @@ CONFIG_USB_PRINTER=m
# CONFIG_USB_TMC is not set
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
# see USB_STORAGE Help for more information
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
@ -1198,7 +1215,6 @@ CONFIG_USB_STORAGE_JUMPSHOT=y
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
@ -1215,6 +1231,7 @@ CONFIG_USB_STORAGE_JUMPSHOT=y
# OTG and related infrastructure
#
# CONFIG_USB_GPIO_VBUS is not set
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
CONFIG_MMC=y
# CONFIG_MMC_DEBUG is not set
@ -1245,7 +1262,11 @@ CONFIG_LEDS_CLASS=y
#
# CONFIG_LEDS_PCA9532 is not set
CONFIG_LEDS_GPIO=y
CONFIG_LEDS_GPIO_PLATFORM=y
# CONFIG_LEDS_LP5521 is not set
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_DAC124S085 is not set
# CONFIG_LEDS_BD2802 is not set
#
# LED Triggers
@ -1255,6 +1276,10 @@ CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
#
# iptables trigger is under Netfilter config (LED target)
#
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
@ -1329,7 +1354,9 @@ CONFIG_DMA_ENGINE=y
# DMA Clients
#
# CONFIG_NET_DMA is not set
# CONFIG_ASYNC_TX_DMA is not set
# CONFIG_DMATEST is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_REGULATOR is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
@ -1341,6 +1368,7 @@ CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
@ -1360,6 +1388,11 @@ CONFIG_INOTIFY_USER=y
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
#
# Caches
#
# CONFIG_FSCACHE is not set
#
# CD-ROM/DVD Filesystems
#
@ -1419,6 +1452,7 @@ CONFIG_CRAMFS=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
@ -1430,7 +1464,6 @@ CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
@ -1502,6 +1535,9 @@ CONFIG_DEBUG_KERNEL=y
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_DETECT_HUNG_TASK=y
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
# CONFIG_SCHED_DEBUG is not set
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
@ -1538,10 +1574,12 @@ CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_PAGE_POISONING is not set
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_RING_BUFFER=y
CONFIG_TRACING=y
CONFIG_TRACING_SUPPORT=y
#
# Tracers
@ -1551,11 +1589,15 @@ CONFIG_TRACING=y
# CONFIG_PREEMPT_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
@ -1587,10 +1629,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
@ -1659,6 +1703,7 @@ CONFIG_CRYPTO_ARC4=y
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
@ -1667,6 +1712,7 @@ CONFIG_CRYPTO_ARC4=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
CONFIG_BINARY_PRINTF=y
#
# Library routines
@ -1682,7 +1728,7 @@ CONFIG_CRC32=y
CONFIG_LIBCRC32C=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_NLATTR=y

File diff suppressed because it is too large Load Diff

View File

@ -197,7 +197,7 @@ CONFIG_MXC_PWM=y
#
CONFIG_CPU_32=y
CONFIG_CPU_V6=y
CONFIG_CPU_32v6K=y
# CONFIG_CPU_32v6K is not set
CONFIG_CPU_32v6=y
CONFIG_CPU_ABRT_EV6=y
CONFIG_CPU_PABRT_NOIFAR=y

View File

@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.27-rc4
# Fri Aug 22 12:38:51 2008
# Linux kernel version: 2.6.30-rc4
# Mon May 4 14:07:25 2009
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@ -22,8 +22,6 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_SUPPORTS_AOUT=y
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@ -44,10 +42,19 @@ CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
#
# RCU Subsystem
#
CONFIG_CLASSIC_RCU=y
# CONFIG_TREE_RCU is not set
# CONFIG_PREEMPT_RCU is not set
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
# CONFIG_GROUP_SCHED is not set
# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
@ -55,48 +62,45 @@ CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
# CONFIG_SLUB_DEBUG is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
# CONFIG_MARKERS is not set
CONFIG_OPROFILE=y
CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
CONFIG_KRETPROBES=y
# CONFIG_HAVE_IOREMAP_PROT is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
# CONFIG_HAVE_ARCH_TRACEHOOK is not set
# CONFIG_HAVE_DMA_ATTRS is not set
# CONFIG_USE_GENERIC_SMP_HELPERS is not set
# CONFIG_HAVE_CLK is not set
CONFIG_PROC_PAGE_MONITOR=y
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
@ -104,11 +108,8 @@ CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@ -124,7 +125,7 @@ CONFIG_IOSCHED_CFQ=y
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_CLASSIC_RCU=y
# CONFIG_FREEZER is not set
#
# System Type
@ -134,10 +135,10 @@ CONFIG_CLASSIC_RCU=y
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_AT91 is not set
# CONFIG_ARCH_CLPS7500 is not set
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
# CONFIG_ARCH_GEMINI is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_H720X is not set
@ -158,14 +159,17 @@ CONFIG_CLASSIC_RCU=y
CONFIG_ARCH_ORION5X=y
# CONFIG_ARCH_PNX4008 is not set
# CONFIG_ARCH_PXA is not set
# CONFIG_ARCH_MMP is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C2410 is not set
# CONFIG_ARCH_S3C64XX is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP is not set
# CONFIG_ARCH_MSM7X00A is not set
# CONFIG_ARCH_MSM is not set
# CONFIG_ARCH_W90X900 is not set
#
# Orion Implementations
@ -175,6 +179,7 @@ CONFIG_MACH_RD88F5182=y
CONFIG_MACH_KUROBOX_PRO=y
CONFIG_MACH_DNS323=y
CONFIG_MACH_TS209=y
CONFIG_MACH_TERASTATION_PRO2=y
CONFIG_MACH_LINKSTATION_PRO=y
CONFIG_MACH_LINKSTATION_MINI=y
CONFIG_MACH_TS409=y
@ -187,14 +192,6 @@ CONFIG_MACH_WNR854T=y
CONFIG_MACH_RD88F5181L_GE=y
CONFIG_MACH_RD88F5181L_FXO=y
CONFIG_MACH_RD88F6183AP_GE=y
#
# Boot options
#
#
# Power management
#
CONFIG_PLAT_ORION=y
#
@ -228,6 +225,8 @@ CONFIG_PCI_SYSCALL=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
#
@ -237,25 +236,32 @@ CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_VMSPLIT_3G=y
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_1G is not set
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_PREEMPT=y
CONFIG_HZ=100
CONFIG_AEABI=y
CONFIG_OABI_COMPAT=y
# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
CONFIG_ARCH_FLATMEM_HAS_HOLES=y
# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
# CONFIG_HIGHMEM is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4096
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_LEDS=y
CONFIG_LEDS_CPU=y
CONFIG_ALIGNMENT_TRAP=y
@ -269,6 +275,11 @@ CONFIG_CMDLINE=""
# CONFIG_XIP_KERNEL is not set
# CONFIG_KEXEC is not set
#
# CPU Power Management
#
# CONFIG_CPU_IDLE is not set
#
# Floating point emulation
#
@ -285,13 +296,18 @@ CONFIG_VFP=y
# Userspace binary formats
#
CONFIG_BINFMT_ELF=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_HAVE_AOUT=y
# CONFIG_BINFMT_AOUT is not set
# CONFIG_BINFMT_MISC is not set
#
# Power management options
#
# CONFIG_PM is not set
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
# CONFIG_SUSPEND is not set
# CONFIG_APM_EMULATION is not set
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_NET=y
@ -328,7 +344,7 @@ CONFIG_IP_PNP_BOOTP=y
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
CONFIG_INET_LRO=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
@ -343,6 +359,15 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
CONFIG_NET_DSA=y
CONFIG_NET_DSA_TAG_DSA=y
CONFIG_NET_DSA_TAG_EDSA=y
# CONFIG_NET_DSA_TAG_TRAILER is not set
CONFIG_NET_DSA_MV88E6XXX=y
# CONFIG_NET_DSA_MV88E6060 is not set
CONFIG_NET_DSA_MV88E6XXX_NEED_PPU=y
CONFIG_NET_DSA_MV88E6131=y
CONFIG_NET_DSA_MV88E6123_61_65=y
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
@ -352,27 +377,29 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
#
# Network testing
#
CONFIG_NET_PKTGEN=m
# CONFIG_NET_TCPPROBE is not set
# CONFIG_NET_DROP_MONITOR is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
#
# Wireless
#
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
# CONFIG_WIRELESS_OLD_REGULATORY is not set
CONFIG_WIRELESS_EXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
# CONFIG_LIB80211 is not set
# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@ -397,6 +424,7 @@ CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_AFS_PARTS is not set
@ -450,9 +478,7 @@ CONFIG_MTD_CFI_UTIL=y
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_PHYSMAP_START=0x0
CONFIG_MTD_PHYSMAP_LEN=0x0
CONFIG_MTD_PHYSMAP_BANKWIDTH=0
# CONFIG_MTD_PHYSMAP_COMPAT is not set
# CONFIG_MTD_ARM_INTEGRATOR is not set
# CONFIG_MTD_IMPA7 is not set
# CONFIG_MTD_INTEL_VR_NOR is not set
@ -477,6 +503,7 @@ CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_VERIFY_WRITE=y
# CONFIG_MTD_NAND_ECC_SMC is not set
# CONFIG_MTD_NAND_MUSEUM_IDS is not set
# CONFIG_MTD_NAND_GPIO is not set
CONFIG_MTD_NAND_IDS=y
# CONFIG_MTD_NAND_DISKONCHIP is not set
# CONFIG_MTD_NAND_CAFE is not set
@ -486,6 +513,11 @@ CONFIG_MTD_NAND_PLATFORM=y
CONFIG_MTD_NAND_ORION=y
# CONFIG_MTD_ONENAND is not set
#
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
#
# UBI - Unsorted block images
#
@ -507,11 +539,20 @@ CONFIG_BLK_DEV_LOOP=y
# CONFIG_ATA_OVER_ETH is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set
#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
@ -569,7 +610,11 @@ CONFIG_SCSI_LOWLEVEL=y
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_LIBFC is not set
# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_IPS is not set
@ -589,6 +634,7 @@ CONFIG_SCSI_LOWLEVEL=y
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_SATA_PMP=y
@ -663,6 +709,7 @@ CONFIG_SATA_MV=y
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@ -670,7 +717,26 @@ CONFIG_NETDEVICES=y
# CONFIG_TUN is not set
# CONFIG_VETH is not set
# CONFIG_ARCNET is not set
# CONFIG_PHYLIB is not set
CONFIG_PHYLIB=y
#
# MII PHY device drivers
#
CONFIG_MARVELL_PHY=y
# CONFIG_DAVICOM_PHY is not set
# CONFIG_QSEMI_PHY is not set
# CONFIG_LXT_PHY is not set
# CONFIG_CICADA_PHY is not set
# CONFIG_VITESSE_PHY is not set
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
# CONFIG_NATIONAL_PHY is not set
# CONFIG_STE10XP is not set
# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_AX88796 is not set
@ -680,19 +746,25 @@ CONFIG_MII=y
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_SMC91X is not set
# CONFIG_DM9000 is not set
# CONFIG_ETHOC is not set
# CONFIG_SMC911X is not set
# CONFIG_SMSC911X is not set
# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
@ -702,10 +774,12 @@ CONFIG_NET_PCI=y
# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SMSC9420 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
@ -713,6 +787,7 @@ CONFIG_NETDEV_1000=y
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
@ -727,6 +802,8 @@ CONFIG_MV643XX_ETH=y
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_ATL1C is not set
# CONFIG_JME is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
@ -735,7 +812,10 @@ CONFIG_MV643XX_ETH=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
#
# USB Network Adapters
@ -819,11 +899,11 @@ CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=16
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_RAW_DRIVER is not set
@ -886,12 +966,9 @@ CONFIG_I2C_MV64XXX=y
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
@ -911,14 +988,17 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
@ -933,10 +1013,15 @@ CONFIG_SENSORS_LM75=y
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_SHT15 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
@ -956,12 +1041,14 @@ CONFIG_SENSORS_LM75=y
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
@ -970,9 +1057,12 @@ CONFIG_SSB_POSSIBLE=y
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_T7L66XB is not set
# CONFIG_MFD_TC6387XB is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
#
# Multimedia devices
@ -1013,9 +1103,36 @@ CONFIG_HID=y
# USB Input Devices
#
CONFIG_USB_HID=y
# CONFIG_USB_HIDINPUT_POWERBOOK is not set
# CONFIG_HID_FF is not set
# CONFIG_HID_PID is not set
# CONFIG_USB_HIDDEV is not set
#
# Special HID drivers
#
# CONFIG_HID_A4TECH is not set
# CONFIG_HID_APPLE is not set
# CONFIG_HID_BELKIN is not set
# CONFIG_HID_CHERRY is not set
# CONFIG_HID_CHICONY is not set
# CONFIG_HID_CYPRESS is not set
# CONFIG_DRAGONRISE_FF is not set
# CONFIG_HID_EZKEY is not set
# CONFIG_HID_KYE is not set
# CONFIG_HID_GYRATION is not set
# CONFIG_HID_KENSINGTON is not set
# CONFIG_HID_LOGITECH is not set
# CONFIG_HID_MICROSOFT is not set
# CONFIG_HID_MONTEREY is not set
# CONFIG_HID_NTRIG is not set
# CONFIG_HID_PANTHERLORD is not set
# CONFIG_HID_PETALYNX is not set
# CONFIG_HID_SAMSUNG is not set
# CONFIG_HID_SONY is not set
# CONFIG_HID_SUNPLUS is not set
# CONFIG_GREENASIA_FF is not set
# CONFIG_HID_TOPSEED is not set
# CONFIG_THRUSTMASTER_FF is not set
# CONFIG_ZEROPLUS_FF is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
@ -1030,10 +1147,13 @@ CONFIG_USB=y
CONFIG_USB_DEVICEFS=y
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
# CONFIG_USB_MON is not set
# CONFIG_USB_WUSB is not set
# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
@ -1042,12 +1162,15 @@ CONFIG_USB_DEVICE_CLASS=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_WHCI_HCD is not set
# CONFIG_USB_HWA_HCD is not set
#
# USB Device Class drivers
@ -1055,20 +1178,20 @@ CONFIG_USB_EHCI_TT_NEWSCHED=y
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=y
# CONFIG_USB_WDM is not set
# CONFIG_USB_TMC is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
# may also be needed; see USB_STORAGE Help for more information
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
# CONFIG_USB_STORAGE_ISD200 is not set
CONFIG_USB_STORAGE_DPCM=y
# CONFIG_USB_STORAGE_USBAT is not set
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
@ -1076,7 +1199,6 @@ CONFIG_USB_STORAGE_JUMPSHOT=y
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_STORAGE_SIERRA is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_LIBUSUAL is not set
@ -1097,6 +1219,7 @@ CONFIG_USB_STORAGE_JUMPSHOT=y
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
@ -1104,7 +1227,6 @@ CONFIG_USB_STORAGE_JUMPSHOT=y
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
@ -1114,8 +1236,18 @@ CONFIG_USB_STORAGE_JUMPSHOT=y
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
#
# OTG and related infrastructure
#
# CONFIG_USB_GPIO_VBUS is not set
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_ACCESSIBILITY is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
@ -1124,7 +1256,10 @@ CONFIG_LEDS_CLASS=y
#
# CONFIG_LEDS_PCA9532 is not set
CONFIG_LEDS_GPIO=y
CONFIG_LEDS_GPIO_PLATFORM=y
# CONFIG_LEDS_LP5521 is not set
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_BD2802 is not set
#
# LED Triggers
@ -1132,7 +1267,12 @@ CONFIG_LEDS_GPIO=y
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
#
# iptables trigger is under Netfilter config (LED target)
#
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
@ -1164,6 +1304,7 @@ CONFIG_RTC_DRV_M41T80=y
# CONFIG_RTC_DRV_M41T80_WDT is not set
CONFIG_RTC_DRV_S35390A=y
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
#
# SPI RTC drivers
@ -1173,12 +1314,15 @@ CONFIG_RTC_DRV_S35390A=y
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
CONFIG_RTC_DRV_M48T86=y
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
@ -1196,16 +1340,12 @@ CONFIG_DMA_ENGINE=y
# DMA Clients
#
# CONFIG_NET_DMA is not set
# CONFIG_ASYNC_TX_DMA is not set
# CONFIG_DMATEST is not set
#
# Voltage and Current regulators
#
# CONFIG_AUXDISPLAY is not set
# CONFIG_REGULATOR is not set
# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
# CONFIG_REGULATOR_BQ24022 is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
#
# File systems
@ -1214,14 +1354,25 @@ CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
# CONFIG_EXT4DEV_FS is not set
CONFIG_EXT4_FS=m
# CONFIG_EXT4DEV_COMPAT is not set
CONFIG_EXT4_FS_XATTR=y
# CONFIG_EXT4_FS_POSIX_ACL is not set
# CONFIG_EXT4_FS_SECURITY is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_JBD2=m
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=m
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
@ -1230,6 +1381,11 @@ CONFIG_INOTIFY_USER=y
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
#
# Caches
#
# CONFIG_FSCACHE is not set
#
# CD-ROM/DVD Filesystems
#
@ -1254,15 +1410,13 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
#
CONFIG_PROC_FS=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
#
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
@ -1282,6 +1436,7 @@ CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
CONFIG_CRAMFS=y
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
@ -1290,6 +1445,7 @@ CONFIG_CRAMFS=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
@ -1381,13 +1537,16 @@ CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_DETECT_HUNG_TASK=y
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
# CONFIG_TIMER_STATS is not set
@ -1411,25 +1570,46 @@ CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
CONFIG_FRAME_POINTER=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not set
CONFIG_LATENCYTOP=y
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
# CONFIG_FTRACE is not set
# CONFIG_PAGE_POISONING is not set
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_RING_BUFFER=y
CONFIG_TRACING=y
CONFIG_TRACING_SUPPORT=y
#
# Tracers
#
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_PREEMPT_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_ARM_UNWIND=y
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_ERRORS=y
# CONFIG_DEBUG_STACK_USAGE is not set
@ -1441,18 +1621,27 @@ CONFIG_DEBUG_LL=y
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_ASYNC_CORE=y
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=m
CONFIG_CRYPTO_ALGAPI2=m
CONFIG_CRYPTO_AEAD2=m
CONFIG_CRYPTO_BLKCIPHER=m
CONFIG_CRYPTO_BLKCIPHER2=m
CONFIG_CRYPTO_HASH2=m
CONFIG_CRYPTO_RNG2=m
CONFIG_CRYPTO_PCOMP=m
CONFIG_CRYPTO_MANAGER=m
CONFIG_CRYPTO_MANAGER2=m
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
CONFIG_CRYPTO_WORKQUEUE=m
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
@ -1521,18 +1710,24 @@ CONFIG_CRYPTO_PCBC=m
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
CONFIG_BINARY_PRINTF=y
#
# Library routines
#
CONFIG_BITREVERSE=y
# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_GENERIC_FIND_NEXT_BIT is not set
CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC16=m
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
@ -1540,7 +1735,7 @@ CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_NLATTR=y

View File

@ -298,7 +298,6 @@ CONFIG_CPU_FREQ_GOV_POWERSAVE=m
CONFIG_CPU_FREQ_GOV_USERSPACE=m
CONFIG_CPU_FREQ_GOV_ONDEMAND=m
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
CONFIG_CPU_FREQ_PXA=y
#
# Floating point emulation

View File

@ -45,13 +45,15 @@ typedef struct user_fp elf_fpregset_t;
#define EF_ARM_HASENTRY 0x00000002 /* All */
#define EF_ARM_RELEXEC 0x00000001 /* All */
#define R_ARM_NONE 0
#define R_ARM_PC24 1
#define R_ARM_ABS32 2
#define R_ARM_CALL 28
#define R_ARM_JUMP24 29
#define R_ARM_V4BX 40
#define R_ARM_PREL31 42
#define R_ARM_NONE 0
#define R_ARM_PC24 1
#define R_ARM_ABS32 2
#define R_ARM_CALL 28
#define R_ARM_JUMP24 29
#define R_ARM_V4BX 40
#define R_ARM_PREL31 42
#define R_ARM_MOVW_ABS_NC 43
#define R_ARM_MOVT_ABS 44
/*
* These are used to set parameters in the core dumps.

View File

@ -387,6 +387,8 @@
#define __NR_dup3 (__NR_SYSCALL_BASE+358)
#define __NR_pipe2 (__NR_SYSCALL_BASE+359)
#define __NR_inotify_init1 (__NR_SYSCALL_BASE+360)
#define __NR_preadv (__NR_SYSCALL_BASE+361)
#define __NR_pwritev (__NR_SYSCALL_BASE+362)
/*
* The following SWIs are ARM private.

View File

@ -370,6 +370,8 @@
CALL(sys_dup3)
CALL(sys_pipe2)
/* 360 */ CALL(sys_inotify_init1)
CALL(sys_preadv)
CALL(sys_pwritev)
#ifndef syscalls_counted
.equ syscalls_padding, ((NR_syscalls + 3) & ~3) - NR_syscalls
#define syscalls_counted

View File

@ -169,6 +169,21 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex,
*(u32 *)loc = offset & 0x7fffffff;
break;
case R_ARM_MOVW_ABS_NC:
case R_ARM_MOVT_ABS:
offset = *(u32 *)loc;
offset = ((offset & 0xf0000) >> 4) | (offset & 0xfff);
offset = (offset ^ 0x8000) - 0x8000;
offset += sym->st_value;
if (ELF32_R_TYPE(rel->r_info) == R_ARM_MOVT_ABS)
offset >>= 16;
*(u32 *)loc &= 0xfff0f000;
*(u32 *)loc |= ((offset & 0xf000) << 4) |
(offset & 0x0fff);
break;
default:
printk(KERN_ERR "%s: unknown relocation: %u\n",
module->name, ELF32_R_TYPE(rel->r_info));

View File

@ -177,21 +177,12 @@ asmlinkage long sys_oabi_fstatat64(int dfd,
int flag)
{
struct kstat stat;
int error = -EINVAL;
int error;
if ((flag & ~AT_SYMLINK_NOFOLLOW) != 0)
goto out;
if (flag & AT_SYMLINK_NOFOLLOW)
error = vfs_lstat_fd(dfd, filename, &stat);
else
error = vfs_stat_fd(dfd, filename, &stat);
if (!error)
error = cp_oldabi_stat64(&stat, statbuf);
out:
return error;
error = vfs_fstatat(dfd, filename, &stat, flag);
if (error)
return error;
return cp_oldabi_stat64(&stat, statbuf);
}
struct oabi_flock64 {

View File

@ -85,7 +85,7 @@ static struct irqaction at91rm9200_timer_irq = {
.handler = at91rm9200_timer_interrupt
};
static cycle_t read_clk32k(void)
static cycle_t read_clk32k(struct clocksource *cs)
{
return read_CRTR();
}

View File

@ -31,7 +31,7 @@ static u32 pit_cnt; /* access only w/system irq blocked */
* Clocksource: just a monotonic counter of MCK/16 cycles.
* We don't care whether or not PIT irqs are enabled.
*/
static cycle_t read_pit_clk(void)
static cycle_t read_pit_clk(struct clocksource *cs)
{
unsigned long flags;
u32 elapsed;

View File

@ -4,19 +4,56 @@ menu "TI DaVinci Implementations"
comment "DaVinci Core Type"
config ARCH_DAVINCI644x
default y
config ARCH_DAVINCI_DM644x
bool "DaVinci 644x based system"
comment "DaVinci Board Type"
config MACH_DAVINCI_EVM
bool "TI DaVinci EVM"
bool "TI DM644x EVM"
default y
depends on ARCH_DAVINCI644x
depends on ARCH_DAVINCI_DM644x
help
Configure this option to specify the whether the board used
for development is a DaVinci EVM
for development is a DM644x EVM
config DAVINCI_MUX
bool "DAVINCI multiplexing support"
depends on ARCH_DAVINCI
default y
help
Pin multiplexing support for DAVINCI boards. If your bootloader
sets the multiplexing correctly, say N. Otherwise, or if unsure,
say Y.
config DAVINCI_MUX_DEBUG
bool "Multiplexing debug output"
depends on DAVINCI_MUX
help
Makes the multiplexing functions print out a lot of debug info.
This is useful if you want to find out the correct values of the
multiplexing registers.
config DAVINCI_MUX_WARNINGS
bool "Warn about pins the bootloader didn't set up"
depends on DAVINCI_MUX
help
Choose Y here to warn whenever driver initialization logic needs
to change the pin multiplexing setup. When there are no warnings
printed, it's safe to deselect DAVINCI_MUX for your product.
config DAVINCI_RESET_CLOCKS
bool "Reset unused clocks during boot"
depends on ARCH_DAVINCI
help
Say Y if you want to reset unused clocks during boot.
This option saves power, but assumes all drivers are
using the clock framework. Broken drivers that do not
yet use clock framework may not work with this option.
If you are booting from another operating system, you
probably do not want this option enabled until your
device drivers work properly.
endmenu

View File

@ -5,7 +5,12 @@
# Common objects
obj-y := time.o irq.o clock.o serial.o io.o id.o psc.o \
gpio.o mux.o devices.o usb.o
gpio.o devices.o dma.o usb.o
obj-$(CONFIG_DAVINCI_MUX) += mux.o
# Chip specific
obj-$(CONFIG_ARCH_DAVINCI_DM644x) += dm644x.o
# Board specific
obj-$(CONFIG_MACH_DAVINCI_EVM) += board-evm.o
obj-$(CONFIG_MACH_DAVINCI_EVM) += board-dm644x-evm.o

View File

@ -15,15 +15,20 @@
#include <linux/platform_device.h>
#include <linux/gpio.h>
#include <linux/leds.h>
#include <linux/memory.h>
#include <linux/etherdevice.h>
#include <linux/i2c.h>
#include <linux/i2c/pcf857x.h>
#include <linux/i2c/at24.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
#include <linux/io.h>
#include <linux/phy.h>
#include <linux/clk.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
@ -32,25 +37,34 @@
#include <asm/mach/map.h>
#include <asm/mach/flash.h>
#include <mach/hardware.h>
#include <mach/dm644x.h>
#include <mach/common.h>
#include <mach/i2c.h>
#include <mach/serial.h>
#include <mach/mux.h>
#include <mach/psc.h>
#include <mach/nand.h>
/* other misc. init functions */
void __init davinci_psc_init(void);
void __init davinci_irq_init(void);
void __init davinci_map_common_io(void);
void __init davinci_init_common_hw(void);
#define DM644X_EVM_PHY_MASK (0x2)
#define DM644X_EVM_MDIO_FREQUENCY (2200000) /* PHY bus frequency */
#if defined(CONFIG_MTD_PHYSMAP) || \
defined(CONFIG_MTD_PHYSMAP_MODULE)
#define DAVINCI_CFC_ATA_BASE 0x01C66000
#define DAVINCI_ASYNC_EMIF_CONTROL_BASE 0x01e00000
#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE 0x02000000
#define DAVINCI_ASYNC_EMIF_DATA_CE1_BASE 0x04000000
#define DAVINCI_ASYNC_EMIF_DATA_CE2_BASE 0x06000000
#define DAVINCI_ASYNC_EMIF_DATA_CE3_BASE 0x08000000
#define LXT971_PHY_ID (0x001378e2)
#define LXT971_PHY_MASK (0xfffffff0)
static struct mtd_partition davinci_evm_norflash_partitions[] = {
/* bootloader (U-Boot, etc) in first 4 sectors */
/* bootloader (UBL, U-Boot, etc) in first 5 sectors */
{
.name = "bootloader",
.offset = 0,
.size = 4 * SZ_64K,
.size = 5 * SZ_64K,
.mask_flags = MTD_WRITEABLE, /* force read-only */
},
/* bootloader params in the next 1 sectors */
@ -100,10 +114,89 @@ static struct platform_device davinci_evm_norflash_device = {
.resource = &davinci_evm_norflash_resource,
};
#endif
/* DM644x EVM includes a 64 MByte small-page NAND flash (16K blocks).
* It may used instead of the (default) NOR chip to boot, using TI's
* tools to install the secondary boot loader (UBL) and U-Boot.
*/
struct mtd_partition davinci_evm_nandflash_partition[] = {
/* Bootloader layout depends on whose u-boot is installed, but we
* can hide all the details.
* - block 0 for u-boot environment ... in mainline u-boot
* - block 1 for UBL (plus up to four backup copies in blocks 2..5)
* - blocks 6...? for u-boot
* - blocks 16..23 for u-boot environment ... in TI's u-boot
*/
{
.name = "bootloader",
.offset = 0,
.size = SZ_256K + SZ_128K,
.mask_flags = MTD_WRITEABLE, /* force read-only */
},
/* Kernel */
{
.name = "kernel",
.offset = MTDPART_OFS_APPEND,
.size = SZ_4M,
.mask_flags = 0,
},
/* File system (older GIT kernels started this on the 5MB mark) */
{
.name = "filesystem",
.offset = MTDPART_OFS_APPEND,
.size = MTDPART_SIZ_FULL,
.mask_flags = 0,
}
/* A few blocks at end hold a flash BBT ... created by TI's CCS
* using flashwriter_nand.out, but ignored by TI's versions of
* Linux and u-boot. We boot faster by using them.
*/
};
#if defined(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \
defined(CONFIG_BLK_DEV_PALMCHIP_BK3710_MODULE)
static struct davinci_nand_pdata davinci_evm_nandflash_data = {
.parts = davinci_evm_nandflash_partition,
.nr_parts = ARRAY_SIZE(davinci_evm_nandflash_partition),
.ecc_mode = NAND_ECC_HW,
.options = NAND_USE_FLASH_BBT,
};
static struct resource davinci_evm_nandflash_resource[] = {
{
.start = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE,
.end = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE + SZ_16M - 1,
.flags = IORESOURCE_MEM,
}, {
.start = DAVINCI_ASYNC_EMIF_CONTROL_BASE,
.end = DAVINCI_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
};
static struct platform_device davinci_evm_nandflash_device = {
.name = "davinci_nand",
.id = 0,
.dev = {
.platform_data = &davinci_evm_nandflash_data,
},
.num_resources = ARRAY_SIZE(davinci_evm_nandflash_resource),
.resource = davinci_evm_nandflash_resource,
};
static u64 davinci_fb_dma_mask = DMA_BIT_MASK(32);
static struct platform_device davinci_fb_device = {
.name = "davincifb",
.id = -1,
.dev = {
.dma_mask = &davinci_fb_dma_mask,
.coherent_dma_mask = DMA_BIT_MASK(32),
},
.num_resources = 0,
};
static struct platform_device rtc_dev = {
.name = "rtc_davinci_evm",
.id = -1,
};
static struct resource ide_resources[] = {
{
@ -131,8 +224,6 @@ static struct platform_device ide_dev = {
},
};
#endif
/*----------------------------------------------------------------------*/
/*
@ -311,7 +402,9 @@ evm_u35_setup(struct i2c_client *client, int gpio, unsigned ngpio, void *c)
gpio_request(gpio + 7, "nCF_SEL");
gpio_direction_output(gpio + 7, 1);
/* irlml6401 sustains over 3A, switches 5V in under 8 msec */
/* irlml6401 switches over 1A, in under 8 msec;
* now it can be managed by nDRV_VBUS ...
*/
setup_usb(500, 8);
return 0;
@ -343,13 +436,119 @@ static struct pcf857x_platform_data pcf_data_u35 = {
* - 0x0039, 1 byte NTSC vs PAL (bit 0x80 == PAL)
* - ... newer boards may have more
*/
static struct memory_accessor *at24_mem_acc;
static void at24_setup(struct memory_accessor *mem_acc, void *context)
{
DECLARE_MAC_BUF(mac_str);
char mac_addr[6];
at24_mem_acc = mem_acc;
/* Read MAC addr from EEPROM */
if (at24_mem_acc->read(at24_mem_acc, mac_addr, 0x7f00, 6) == 6) {
printk(KERN_INFO "Read MAC addr from EEPROM: %s\n",
print_mac(mac_str, mac_addr));
}
}
static struct at24_platform_data eeprom_info = {
.byte_len = (256*1024) / 8,
.page_size = 64,
.flags = AT24_FLAG_ADDR16,
.setup = at24_setup,
};
int dm6446evm_eeprom_read(void *buf, off_t off, size_t count)
{
if (at24_mem_acc)
return at24_mem_acc->read(at24_mem_acc, buf, off, count);
return -ENODEV;
}
EXPORT_SYMBOL(dm6446evm_eeprom_read);
int dm6446evm_eeprom_write(void *buf, off_t off, size_t count)
{
if (at24_mem_acc)
return at24_mem_acc->write(at24_mem_acc, buf, off, count);
return -ENODEV;
}
EXPORT_SYMBOL(dm6446evm_eeprom_write);
/*
* MSP430 supports RTC, card detection, input from IR remote, and
* a bit more. It triggers interrupts on GPIO(7) from pressing
* buttons on the IR remote, and for card detect switches.
*/
static struct i2c_client *dm6446evm_msp;
static int dm6446evm_msp_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
dm6446evm_msp = client;
return 0;
}
static int dm6446evm_msp_remove(struct i2c_client *client)
{
dm6446evm_msp = NULL;
return 0;
}
static const struct i2c_device_id dm6446evm_msp_ids[] = {
{ "dm6446evm_msp", 0, },
{ /* end of list */ },
};
static struct i2c_driver dm6446evm_msp_driver = {
.driver.name = "dm6446evm_msp",
.id_table = dm6446evm_msp_ids,
.probe = dm6446evm_msp_probe,
.remove = dm6446evm_msp_remove,
};
static int dm6444evm_msp430_get_pins(void)
{
static const char txbuf[2] = { 2, 4, };
char buf[4];
struct i2c_msg msg[2] = {
{
.addr = dm6446evm_msp->addr,
.flags = 0,
.len = 2,
.buf = (void __force *)txbuf,
},
{
.addr = dm6446evm_msp->addr,
.flags = I2C_M_RD,
.len = 4,
.buf = buf,
},
};
int status;
if (!dm6446evm_msp)
return -ENXIO;
/* Command 4 == get input state, returns port 2 and port3 data
* S Addr W [A] len=2 [A] cmd=4 [A]
* RS Addr R [A] [len=4] A [cmd=4] A [port2] A [port3] N P
*/
status = i2c_transfer(dm6446evm_msp->adapter, msg, 2);
if (status < 0)
return status;
dev_dbg(&dm6446evm_msp->dev,
"PINS: %02x %02x %02x %02x\n",
buf[0], buf[1], buf[2], buf[3]);
return (buf[3] << 8) | buf[2];
}
static struct i2c_board_info __initdata i2c_info[] = {
{
I2C_BOARD_INFO("dm6446evm_msp", 0x23),
},
{
I2C_BOARD_INFO("pcf8574", 0x38),
.platform_data = &pcf_data_u2,
@ -368,7 +567,6 @@ static struct i2c_board_info __initdata i2c_info[] = {
},
/* ALSO:
* - tvl320aic33 audio codec (0x1b)
* - msp430 microcontroller (0x23)
* - tvp5146 video decoder (0x5d)
*/
};
@ -384,51 +582,109 @@ static struct davinci_i2c_platform_data i2c_pdata = {
static void __init evm_init_i2c(void)
{
davinci_init_i2c(&i2c_pdata);
i2c_add_driver(&dm6446evm_msp_driver);
i2c_register_board_info(1, i2c_info, ARRAY_SIZE(i2c_info));
}
static struct platform_device *davinci_evm_devices[] __initdata = {
#if defined(CONFIG_MTD_PHYSMAP) || \
defined(CONFIG_MTD_PHYSMAP_MODULE)
&davinci_evm_norflash_device,
#endif
#if defined(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \
defined(CONFIG_BLK_DEV_PALMCHIP_BK3710_MODULE)
&ide_dev,
#endif
&davinci_fb_device,
&rtc_dev,
};
static struct davinci_uart_config uart_config __initdata = {
.enabled_uarts = (1 << 0),
};
static void __init
davinci_evm_map_io(void)
{
davinci_map_common_io();
dm644x_init();
}
static __init void davinci_evm_init(void)
static int davinci_phy_fixup(struct phy_device *phydev)
{
davinci_psc_init();
unsigned int control;
/* CRITICAL: Fix for increasing PHY signal drive strength for
* TX lockup issue. On DaVinci EVM, the Intel LXT971 PHY
* signal strength was low causing TX to fail randomly. The
* fix is to Set bit 11 (Increased MII drive strength) of PHY
* register 26 (Digital Config register) on this phy. */
control = phy_read(phydev, 26);
phy_write(phydev, 26, (control | 0x800));
return 0;
}
#if defined(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \
defined(CONFIG_BLK_DEV_PALMCHIP_BK3710_MODULE)
#define HAS_ATA 1
#else
#define HAS_ATA 0
#endif
#if defined(CONFIG_MTD_PHYSMAP) || \
defined(CONFIG_MTD_PHYSMAP_MODULE)
printk(KERN_WARNING "WARNING: both IDE and NOR flash are enabled, "
"but share pins.\n\t Disable IDE for NOR support.\n");
#define HAS_NOR 1
#else
#define HAS_NOR 0
#endif
#if defined(CONFIG_MTD_NAND_DAVINCI) || \
defined(CONFIG_MTD_NAND_DAVINCI_MODULE)
#define HAS_NAND 1
#else
#define HAS_NAND 0
#endif
static __init void davinci_evm_init(void)
{
struct clk *aemif_clk;
aemif_clk = clk_get(NULL, "aemif");
clk_enable(aemif_clk);
if (HAS_ATA) {
if (HAS_NAND || HAS_NOR)
pr_warning("WARNING: both IDE and Flash are "
"enabled, but they share AEMIF pins.\n"
"\tDisable IDE for NAND/NOR support.\n");
davinci_cfg_reg(DM644X_HPIEN_DISABLE);
davinci_cfg_reg(DM644X_ATAEN);
davinci_cfg_reg(DM644X_HDIREN);
platform_device_register(&ide_dev);
} else if (HAS_NAND || HAS_NOR) {
davinci_cfg_reg(DM644X_HPIEN_DISABLE);
davinci_cfg_reg(DM644X_ATAEN_DISABLE);
/* only one device will be jumpered and detected */
if (HAS_NAND) {
platform_device_register(&davinci_evm_nandflash_device);
evm_leds[7].default_trigger = "nand-disk";
if (HAS_NOR)
pr_warning("WARNING: both NAND and NOR flash "
"are enabled; disable one of them.\n");
} else if (HAS_NOR)
platform_device_register(&davinci_evm_norflash_device);
}
platform_add_devices(davinci_evm_devices,
ARRAY_SIZE(davinci_evm_devices));
evm_init_i2c();
davinci_serial_init(&uart_config);
/* Register the fixup for PHY on DaVinci */
phy_register_fixup_for_uid(LXT971_PHY_ID, LXT971_PHY_MASK,
davinci_phy_fixup);
}
static __init void davinci_evm_irq_init(void)
{
davinci_init_common_hw();
davinci_irq_init();
}
MACHINE_START(DAVINCI_EVM, "DaVinci EVM")
MACHINE_START(DAVINCI_EVM, "DaVinci DM644x EVM")
/* Maintainer: MontaVista Software <source@mvista.com> */
.phys_io = IO_PHYS,
.io_pg_offst = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc,

View File

@ -1,7 +1,8 @@
/*
* TI DaVinci clock config file
* Clock and PLL control for DaVinci devices
*
* Copyright (C) 2006 Texas Instruments.
* Copyright (C) 2006-2007 Texas Instruments.
* Copyright (C) 2008-2009 Deep Root Systems, LLC
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@ -13,6 +14,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/mutex.h>
#include <linux/platform_device.h>
@ -21,98 +23,50 @@
#include <mach/hardware.h>
#include <mach/psc.h>
#include <mach/cputype.h>
#include "clock.h"
/* PLL/Reset register offsets */
#define PLLM 0x110
static LIST_HEAD(clocks);
static DEFINE_MUTEX(clocks_mutex);
static DEFINE_SPINLOCK(clockfw_lock);
static unsigned int commonrate;
static unsigned int armrate;
static unsigned int fixedrate = 27000000; /* 27 MHZ */
extern void davinci_psc_config(unsigned int domain, unsigned int id, char enable);
/*
* Returns a clock. Note that we first try to use device id on the bus
* and clock name. If this fails, we try to use clock name only.
*/
struct clk *clk_get(struct device *dev, const char *id)
static unsigned psc_domain(struct clk *clk)
{
struct clk *p, *clk = ERR_PTR(-ENOENT);
int idno;
if (dev == NULL || dev->bus != &platform_bus_type)
idno = -1;
else
idno = to_platform_device(dev)->id;
mutex_lock(&clocks_mutex);
list_for_each_entry(p, &clocks, node) {
if (p->id == idno &&
strcmp(id, p->name) == 0 && try_module_get(p->owner)) {
clk = p;
goto found;
}
}
list_for_each_entry(p, &clocks, node) {
if (strcmp(id, p->name) == 0 && try_module_get(p->owner)) {
clk = p;
break;
}
}
found:
mutex_unlock(&clocks_mutex);
return clk;
return (clk->flags & PSC_DSP)
? DAVINCI_GPSC_DSPDOMAIN
: DAVINCI_GPSC_ARMDOMAIN;
}
EXPORT_SYMBOL(clk_get);
void clk_put(struct clk *clk)
static void __clk_enable(struct clk *clk)
{
if (clk && !IS_ERR(clk))
module_put(clk->owner);
}
EXPORT_SYMBOL(clk_put);
static int __clk_enable(struct clk *clk)
{
if (clk->flags & ALWAYS_ENABLED)
return 0;
davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, clk->lpsc, 1);
return 0;
if (clk->parent)
__clk_enable(clk->parent);
if (clk->usecount++ == 0 && (clk->flags & CLK_PSC))
davinci_psc_config(psc_domain(clk), clk->lpsc, 1);
}
static void __clk_disable(struct clk *clk)
{
if (clk->usecount)
if (WARN_ON(clk->usecount == 0))
return;
davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, clk->lpsc, 0);
if (--clk->usecount == 0 && !(clk->flags & CLK_PLL))
davinci_psc_config(psc_domain(clk), clk->lpsc, 0);
if (clk->parent)
__clk_disable(clk->parent);
}
int clk_enable(struct clk *clk)
{
unsigned long flags;
int ret = 0;
if (clk == NULL || IS_ERR(clk))
return -EINVAL;
if (clk->usecount++ == 0) {
spin_lock_irqsave(&clockfw_lock, flags);
ret = __clk_enable(clk);
spin_unlock_irqrestore(&clockfw_lock, flags);
}
spin_lock_irqsave(&clockfw_lock, flags);
__clk_enable(clk);
spin_unlock_irqrestore(&clockfw_lock, flags);
return ret;
return 0;
}
EXPORT_SYMBOL(clk_enable);
@ -123,11 +77,9 @@ void clk_disable(struct clk *clk)
if (clk == NULL || IS_ERR(clk))
return;
if (clk->usecount > 0 && !(--clk->usecount)) {
spin_lock_irqsave(&clockfw_lock, flags);
__clk_disable(clk);
spin_unlock_irqrestore(&clockfw_lock, flags);
}
spin_lock_irqsave(&clockfw_lock, flags);
__clk_disable(clk);
spin_unlock_irqrestore(&clockfw_lock, flags);
}
EXPORT_SYMBOL(clk_disable);
@ -136,7 +88,7 @@ unsigned long clk_get_rate(struct clk *clk)
if (clk == NULL || IS_ERR(clk))
return -EINVAL;
return *(clk->rate);
return clk->rate;
}
EXPORT_SYMBOL(clk_get_rate);
@ -145,7 +97,7 @@ long clk_round_rate(struct clk *clk, unsigned long rate)
if (clk == NULL || IS_ERR(clk))
return -EINVAL;
return *(clk->rate);
return clk->rate;
}
EXPORT_SYMBOL(clk_round_rate);
@ -164,10 +116,23 @@ int clk_register(struct clk *clk)
if (clk == NULL || IS_ERR(clk))
return -EINVAL;
if (WARN(clk->parent && !clk->parent->rate,
"CLK: %s parent %s has no rate!\n",
clk->name, clk->parent->name))
return -EINVAL;
mutex_lock(&clocks_mutex);
list_add(&clk->node, &clocks);
list_add_tail(&clk->node, &clocks);
mutex_unlock(&clocks_mutex);
/* If rate is already set, use it */
if (clk->rate)
return 0;
/* Otherwise, default to parent rate */
if (clk->parent)
clk->rate = clk->parent->rate;
return 0;
}
EXPORT_SYMBOL(clk_register);
@ -183,84 +148,150 @@ void clk_unregister(struct clk *clk)
}
EXPORT_SYMBOL(clk_unregister);
static struct clk davinci_clks[] = {
{
.name = "ARMCLK",
.rate = &armrate,
.lpsc = -1,
.flags = ALWAYS_ENABLED,
},
{
.name = "UART",
.rate = &fixedrate,
.lpsc = DAVINCI_LPSC_UART0,
},
{
.name = "EMACCLK",
.rate = &commonrate,
.lpsc = DAVINCI_LPSC_EMAC_WRAPPER,
},
{
.name = "I2CCLK",
.rate = &fixedrate,
.lpsc = DAVINCI_LPSC_I2C,
},
{
.name = "IDECLK",
.rate = &commonrate,
.lpsc = DAVINCI_LPSC_ATA,
},
{
.name = "McBSPCLK",
.rate = &commonrate,
.lpsc = DAVINCI_LPSC_McBSP,
},
{
.name = "MMCSDCLK",
.rate = &commonrate,
.lpsc = DAVINCI_LPSC_MMC_SD,
},
{
.name = "SPICLK",
.rate = &commonrate,
.lpsc = DAVINCI_LPSC_SPI,
},
{
.name = "gpio",
.rate = &commonrate,
.lpsc = DAVINCI_LPSC_GPIO,
},
{
.name = "usb",
.rate = &commonrate,
.lpsc = DAVINCI_LPSC_USB,
},
{
.name = "AEMIFCLK",
.rate = &commonrate,
.lpsc = DAVINCI_LPSC_AEMIF,
.usecount = 1,
}
};
int __init davinci_clk_init(void)
#ifdef CONFIG_DAVINCI_RESET_CLOCKS
/*
* Disable any unused clocks left on by the bootloader
*/
static int __init clk_disable_unused(void)
{
struct clk *clkp;
int count = 0;
u32 pll_mult;
struct clk *ck;
pll_mult = davinci_readl(DAVINCI_PLL_CNTRL0_BASE + PLLM);
commonrate = ((pll_mult + 1) * 27000000) / 6;
armrate = ((pll_mult + 1) * 27000000) / 2;
spin_lock_irq(&clockfw_lock);
list_for_each_entry(ck, &clocks, node) {
if (ck->usecount > 0)
continue;
if (!(ck->flags & CLK_PSC))
continue;
for (clkp = davinci_clks; count < ARRAY_SIZE(davinci_clks);
count++, clkp++) {
clk_register(clkp);
/* ignore if in Disabled or SwRstDisable states */
if (!davinci_psc_is_clk_active(ck->lpsc))
continue;
/* Turn on clocks that have been enabled in the
* table above */
if (clkp->usecount)
clk_enable(clkp);
pr_info("Clocks: disable unused %s\n", ck->name);
davinci_psc_config(psc_domain(ck), ck->lpsc, 0);
}
spin_unlock_irq(&clockfw_lock);
return 0;
}
late_initcall(clk_disable_unused);
#endif
static void clk_sysclk_recalc(struct clk *clk)
{
u32 v, plldiv;
struct pll_data *pll;
/* If this is the PLL base clock, no more calculations needed */
if (clk->pll_data)
return;
if (WARN_ON(!clk->parent))
return;
clk->rate = clk->parent->rate;
/* Otherwise, the parent must be a PLL */
if (WARN_ON(!clk->parent->pll_data))
return;
pll = clk->parent->pll_data;
/* If pre-PLL, source clock is before the multiplier and divider(s) */
if (clk->flags & PRE_PLL)
clk->rate = pll->input_rate;
if (!clk->div_reg)
return;
v = __raw_readl(pll->base + clk->div_reg);
if (v & PLLDIV_EN) {
plldiv = (v & PLLDIV_RATIO_MASK) + 1;
if (plldiv)
clk->rate /= plldiv;
}
}
static void __init clk_pll_init(struct clk *clk)
{
u32 ctrl, mult = 1, prediv = 1, postdiv = 1;
u8 bypass;
struct pll_data *pll = clk->pll_data;
pll->base = IO_ADDRESS(pll->phys_base);
ctrl = __raw_readl(pll->base + PLLCTL);
clk->rate = pll->input_rate = clk->parent->rate;
if (ctrl & PLLCTL_PLLEN) {
bypass = 0;
mult = __raw_readl(pll->base + PLLM);
mult = (mult & PLLM_PLLM_MASK) + 1;
} else
bypass = 1;
if (pll->flags & PLL_HAS_PREDIV) {
prediv = __raw_readl(pll->base + PREDIV);
if (prediv & PLLDIV_EN)
prediv = (prediv & PLLDIV_RATIO_MASK) + 1;
else
prediv = 1;
}
/* pre-divider is fixed, but (some?) chips won't report that */
if (cpu_is_davinci_dm355() && pll->num == 1)
prediv = 8;
if (pll->flags & PLL_HAS_POSTDIV) {
postdiv = __raw_readl(pll->base + POSTDIV);
if (postdiv & PLLDIV_EN)
postdiv = (postdiv & PLLDIV_RATIO_MASK) + 1;
else
postdiv = 1;
}
if (!bypass) {
clk->rate /= prediv;
clk->rate *= mult;
clk->rate /= postdiv;
}
pr_debug("PLL%d: input = %lu MHz [ ",
pll->num, clk->parent->rate / 1000000);
if (bypass)
pr_debug("bypass ");
if (prediv > 1)
pr_debug("/ %d ", prediv);
if (mult > 1)
pr_debug("* %d ", mult);
if (postdiv > 1)
pr_debug("/ %d ", postdiv);
pr_debug("] --> %lu MHz output.\n", clk->rate / 1000000);
}
int __init davinci_clk_init(struct davinci_clk *clocks)
{
struct davinci_clk *c;
struct clk *clk;
for (c = clocks; c->lk.clk; c++) {
clk = c->lk.clk;
if (clk->pll_data)
clk_pll_init(clk);
/* Calculate rates for PLL-derived clocks */
else if (clk->flags & CLK_PLL)
clk_sysclk_recalc(clk);
if (clk->lpsc)
clk->flags |= CLK_PSC;
clkdev_add(&c->lk);
clk_register(clk);
/* Turn on clocks that Linux doesn't otherwise manage */
if (clk->flags & ALWAYS_ENABLED)
clk_enable(clk);
}
return 0;
@ -285,12 +316,52 @@ static void davinci_ck_stop(struct seq_file *m, void *v)
{
}
#define CLKNAME_MAX 10 /* longest clock name */
#define NEST_DELTA 2
#define NEST_MAX 4
static void
dump_clock(struct seq_file *s, unsigned nest, struct clk *parent)
{
char *state;
char buf[CLKNAME_MAX + NEST_DELTA * NEST_MAX];
struct clk *clk;
unsigned i;
if (parent->flags & CLK_PLL)
state = "pll";
else if (parent->flags & CLK_PSC)
state = "psc";
else
state = "";
/* <nest spaces> name <pad to end> */
memset(buf, ' ', sizeof(buf) - 1);
buf[sizeof(buf) - 1] = 0;
i = strlen(parent->name);
memcpy(buf + nest, parent->name,
min(i, (unsigned)(sizeof(buf) - 1 - nest)));
seq_printf(s, "%s users=%2d %-3s %9ld Hz\n",
buf, parent->usecount, state, clk_get_rate(parent));
/* REVISIT show device associations too */
/* cost is now small, but not linear... */
list_for_each_entry(clk, &clocks, node) {
if (clk->parent == parent)
dump_clock(s, nest + NEST_DELTA, clk);
}
}
static int davinci_ck_show(struct seq_file *m, void *v)
{
struct clk *cp;
list_for_each_entry(cp, &clocks, node)
seq_printf(m,"%s %d %d\n", cp->name, *(cp->rate), cp->usecount);
/* Show clock tree; we know the main oscillator is first.
* We trust nonzero usecounts equate to PSC enables...
*/
mutex_lock(&clocks_mutex);
if (!list_empty(&clocks))
dump_clock(m, 0, list_first_entry(&clocks, struct clk, node));
mutex_unlock(&clocks_mutex);
return 0;
}
@ -321,4 +392,4 @@ static int __init davinci_ck_proc_init(void)
}
__initcall(davinci_ck_proc_init);
#endif /* CONFIG_DEBUG_PROC_FS */
#endif /* CONFIG_DEBUG_PROC_FS */

View File

@ -1,7 +1,8 @@
/*
* TI DaVinci clock definitions
*
* Copyright (C) 2006 Texas Instruments.
* Copyright (C) 2006-2007 Texas Instruments.
* Copyright (C) 2008-2009 Deep Root Systems, LLC
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@ -11,23 +12,85 @@
#ifndef __ARCH_ARM_DAVINCI_CLOCK_H
#define __ARCH_ARM_DAVINCI_CLOCK_H
#include <linux/list.h>
#include <asm/clkdev.h>
#define DAVINCI_PLL1_BASE 0x01c40800
#define DAVINCI_PLL2_BASE 0x01c40c00
#define MAX_PLL 2
/* PLL/Reset register offsets */
#define PLLCTL 0x100
#define PLLCTL_PLLEN BIT(0)
#define PLLCTL_CLKMODE BIT(8)
#define PLLM 0x110
#define PLLM_PLLM_MASK 0xff
#define PREDIV 0x114
#define PLLDIV1 0x118
#define PLLDIV2 0x11c
#define PLLDIV3 0x120
#define POSTDIV 0x128
#define BPDIV 0x12c
#define PLLCMD 0x138
#define PLLSTAT 0x13c
#define PLLALNCTL 0x140
#define PLLDCHANGE 0x144
#define PLLCKEN 0x148
#define PLLCKSTAT 0x14c
#define PLLSYSTAT 0x150
#define PLLDIV4 0x160
#define PLLDIV5 0x164
#define PLLDIV6 0x168
#define PLLDIV7 0x16c
#define PLLDIV8 0x170
#define PLLDIV9 0x174
#define PLLDIV_EN BIT(15)
#define PLLDIV_RATIO_MASK 0x1f
struct pll_data {
u32 phys_base;
void __iomem *base;
u32 num;
u32 flags;
u32 input_rate;
};
#define PLL_HAS_PREDIV 0x01
#define PLL_HAS_POSTDIV 0x02
struct clk {
struct list_head node;
struct module *owner;
const char *name;
unsigned int *rate;
int id;
__s8 usecount;
__u8 flags;
__u8 lpsc;
unsigned long rate;
u8 usecount;
u8 flags;
u8 lpsc;
struct clk *parent;
struct pll_data *pll_data;
u32 div_reg;
};
/* Clock flags */
#define RATE_CKCTL 1
#define RATE_FIXED 2
#define RATE_PROPAGATES 4
#define VIRTUAL_CLOCK 8
#define ALWAYS_ENABLED 16
#define ENABLE_REG_32BIT 32
#define ALWAYS_ENABLED BIT(1)
#define CLK_PSC BIT(2)
#define PSC_DSP BIT(3) /* PSC uses DSP domain, not ARM */
#define CLK_PLL BIT(4) /* PLL-derived clock */
#define PRE_PLL BIT(5) /* source is before PLL mult/div */
struct davinci_clk {
struct clk_lookup lk;
};
#define CLK(dev, con, ck) \
{ \
.lk = { \
.dev_id = dev, \
.con_id = con, \
.clk = ck, \
}, \
}
int davinci_clk_init(struct davinci_clk *clocks);
#endif

View File

@ -21,6 +21,10 @@
#include <mach/hardware.h>
#include <mach/i2c.h>
#include <mach/irqs.h>
#include <mach/cputype.h>
#include <mach/mux.h>
#define DAVINCI_I2C_BASE 0x01C21000
static struct resource i2c_resources[] = {
{
@ -43,6 +47,9 @@ static struct platform_device davinci_i2c_device = {
void __init davinci_init_i2c(struct davinci_i2c_platform_data *pdata)
{
if (cpu_is_davinci_dm644x())
davinci_cfg_reg(DM644X_I2C);
davinci_i2c_device.dev.platform_data = pdata;
(void) platform_device_register(&davinci_i2c_device);
}

View File

@ -0,0 +1,461 @@
/*
* TI DaVinci DM644x chip specific setup
*
* Author: Kevin Hilman, Deep Root Systems, LLC
*
* 2007 (c) Deep Root Systems, LLC. This file is licensed under
* the terms of the GNU General Public License version 2. This program
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/clk.h>
#include <linux/platform_device.h>
#include <mach/dm644x.h>
#include <mach/clock.h>
#include <mach/cputype.h>
#include <mach/edma.h>
#include <mach/irqs.h>
#include <mach/psc.h>
#include <mach/mux.h>
#include "clock.h"
#include "mux.h"
/*
* Device specific clocks
*/
#define DM644X_REF_FREQ 27000000
static struct pll_data pll1_data = {
.num = 1,
.phys_base = DAVINCI_PLL1_BASE,
};
static struct pll_data pll2_data = {
.num = 2,
.phys_base = DAVINCI_PLL2_BASE,
};
static struct clk ref_clk = {
.name = "ref_clk",
.rate = DM644X_REF_FREQ,
};
static struct clk pll1_clk = {
.name = "pll1",
.parent = &ref_clk,
.pll_data = &pll1_data,
.flags = CLK_PLL,
};
static struct clk pll1_sysclk1 = {
.name = "pll1_sysclk1",
.parent = &pll1_clk,
.flags = CLK_PLL,
.div_reg = PLLDIV1,
};
static struct clk pll1_sysclk2 = {
.name = "pll1_sysclk2",
.parent = &pll1_clk,
.flags = CLK_PLL,
.div_reg = PLLDIV2,
};
static struct clk pll1_sysclk3 = {
.name = "pll1_sysclk3",
.parent = &pll1_clk,
.flags = CLK_PLL,
.div_reg = PLLDIV3,
};
static struct clk pll1_sysclk5 = {
.name = "pll1_sysclk5",
.parent = &pll1_clk,
.flags = CLK_PLL,
.div_reg = PLLDIV5,
};
static struct clk pll1_aux_clk = {
.name = "pll1_aux_clk",
.parent = &pll1_clk,
.flags = CLK_PLL | PRE_PLL,
};
static struct clk pll1_sysclkbp = {
.name = "pll1_sysclkbp",
.parent = &pll1_clk,
.flags = CLK_PLL | PRE_PLL,
.div_reg = BPDIV
};
static struct clk pll2_clk = {
.name = "pll2",
.parent = &ref_clk,
.pll_data = &pll2_data,
.flags = CLK_PLL,
};
static struct clk pll2_sysclk1 = {
.name = "pll2_sysclk1",
.parent = &pll2_clk,
.flags = CLK_PLL,
.div_reg = PLLDIV1,
};
static struct clk pll2_sysclk2 = {
.name = "pll2_sysclk2",
.parent = &pll2_clk,
.flags = CLK_PLL,
.div_reg = PLLDIV2,
};
static struct clk pll2_sysclkbp = {
.name = "pll2_sysclkbp",
.parent = &pll2_clk,
.flags = CLK_PLL | PRE_PLL,
.div_reg = BPDIV
};
static struct clk dsp_clk = {
.name = "dsp",
.parent = &pll1_sysclk1,
.lpsc = DAVINCI_LPSC_GEM,
.flags = PSC_DSP,
.usecount = 1, /* REVISIT how to disable? */
};
static struct clk arm_clk = {
.name = "arm",
.parent = &pll1_sysclk2,
.lpsc = DAVINCI_LPSC_ARM,
.flags = ALWAYS_ENABLED,
};
static struct clk vicp_clk = {
.name = "vicp",
.parent = &pll1_sysclk2,
.lpsc = DAVINCI_LPSC_IMCOP,
.flags = PSC_DSP,
.usecount = 1, /* REVISIT how to disable? */
};
static struct clk vpss_master_clk = {
.name = "vpss_master",
.parent = &pll1_sysclk3,
.lpsc = DAVINCI_LPSC_VPSSMSTR,
.flags = CLK_PSC,
};
static struct clk vpss_slave_clk = {
.name = "vpss_slave",
.parent = &pll1_sysclk3,
.lpsc = DAVINCI_LPSC_VPSSSLV,
};
static struct clk uart0_clk = {
.name = "uart0",
.parent = &pll1_aux_clk,
.lpsc = DAVINCI_LPSC_UART0,
};
static struct clk uart1_clk = {
.name = "uart1",
.parent = &pll1_aux_clk,
.lpsc = DAVINCI_LPSC_UART1,
};
static struct clk uart2_clk = {
.name = "uart2",
.parent = &pll1_aux_clk,
.lpsc = DAVINCI_LPSC_UART2,
};
static struct clk emac_clk = {
.name = "emac",
.parent = &pll1_sysclk5,
.lpsc = DAVINCI_LPSC_EMAC_WRAPPER,
};
static struct clk i2c_clk = {
.name = "i2c",
.parent = &pll1_aux_clk,
.lpsc = DAVINCI_LPSC_I2C,
};
static struct clk ide_clk = {
.name = "ide",
.parent = &pll1_sysclk5,
.lpsc = DAVINCI_LPSC_ATA,
};
static struct clk asp_clk = {
.name = "asp0",
.parent = &pll1_sysclk5,
.lpsc = DAVINCI_LPSC_McBSP,
};
static struct clk mmcsd_clk = {
.name = "mmcsd",
.parent = &pll1_sysclk5,
.lpsc = DAVINCI_LPSC_MMC_SD,
};
static struct clk spi_clk = {
.name = "spi",
.parent = &pll1_sysclk5,
.lpsc = DAVINCI_LPSC_SPI,
};
static struct clk gpio_clk = {
.name = "gpio",
.parent = &pll1_sysclk5,
.lpsc = DAVINCI_LPSC_GPIO,
};
static struct clk usb_clk = {
.name = "usb",
.parent = &pll1_sysclk5,
.lpsc = DAVINCI_LPSC_USB,
};
static struct clk vlynq_clk = {
.name = "vlynq",
.parent = &pll1_sysclk5,
.lpsc = DAVINCI_LPSC_VLYNQ,
};
static struct clk aemif_clk = {
.name = "aemif",
.parent = &pll1_sysclk5,
.lpsc = DAVINCI_LPSC_AEMIF,
};
static struct clk pwm0_clk = {
.name = "pwm0",
.parent = &pll1_aux_clk,
.lpsc = DAVINCI_LPSC_PWM0,
};
static struct clk pwm1_clk = {
.name = "pwm1",
.parent = &pll1_aux_clk,
.lpsc = DAVINCI_LPSC_PWM1,
};
static struct clk pwm2_clk = {
.name = "pwm2",
.parent = &pll1_aux_clk,
.lpsc = DAVINCI_LPSC_PWM2,
};
static struct clk timer0_clk = {
.name = "timer0",
.parent = &pll1_aux_clk,
.lpsc = DAVINCI_LPSC_TIMER0,
};
static struct clk timer1_clk = {
.name = "timer1",
.parent = &pll1_aux_clk,
.lpsc = DAVINCI_LPSC_TIMER1,
};
static struct clk timer2_clk = {
.name = "timer2",
.parent = &pll1_aux_clk,
.lpsc = DAVINCI_LPSC_TIMER2,
.usecount = 1, /* REVISIT: why cant' this be disabled? */
};
struct davinci_clk dm644x_clks[] = {
CLK(NULL, "ref", &ref_clk),
CLK(NULL, "pll1", &pll1_clk),
CLK(NULL, "pll1_sysclk1", &pll1_sysclk1),
CLK(NULL, "pll1_sysclk2", &pll1_sysclk2),
CLK(NULL, "pll1_sysclk3", &pll1_sysclk3),
CLK(NULL, "pll1_sysclk5", &pll1_sysclk5),
CLK(NULL, "pll1_aux", &pll1_aux_clk),
CLK(NULL, "pll1_sysclkbp", &pll1_sysclkbp),
CLK(NULL, "pll2", &pll2_clk),
CLK(NULL, "pll2_sysclk1", &pll2_sysclk1),
CLK(NULL, "pll2_sysclk2", &pll2_sysclk2),
CLK(NULL, "pll2_sysclkbp", &pll2_sysclkbp),
CLK(NULL, "dsp", &dsp_clk),
CLK(NULL, "arm", &arm_clk),
CLK(NULL, "vicp", &vicp_clk),
CLK(NULL, "vpss_master", &vpss_master_clk),
CLK(NULL, "vpss_slave", &vpss_slave_clk),
CLK(NULL, "arm", &arm_clk),
CLK(NULL, "uart0", &uart0_clk),
CLK(NULL, "uart1", &uart1_clk),
CLK(NULL, "uart2", &uart2_clk),
CLK("davinci_emac.1", NULL, &emac_clk),
CLK("i2c_davinci.1", NULL, &i2c_clk),
CLK("palm_bk3710", NULL, &ide_clk),
CLK("soc-audio.0", NULL, &asp_clk),
CLK("davinci_mmc.0", NULL, &mmcsd_clk),
CLK(NULL, "spi", &spi_clk),
CLK(NULL, "gpio", &gpio_clk),
CLK(NULL, "usb", &usb_clk),
CLK(NULL, "vlynq", &vlynq_clk),
CLK(NULL, "aemif", &aemif_clk),
CLK(NULL, "pwm0", &pwm0_clk),
CLK(NULL, "pwm1", &pwm1_clk),
CLK(NULL, "pwm2", &pwm2_clk),
CLK(NULL, "timer0", &timer0_clk),
CLK(NULL, "timer1", &timer1_clk),
CLK("watchdog", NULL, &timer2_clk),
CLK(NULL, NULL, NULL),
};
#if defined(CONFIG_TI_DAVINCI_EMAC) || defined(CONFIG_TI_DAVINCI_EMAC_MODULE)
static struct resource dm644x_emac_resources[] = {
{
.start = DM644X_EMAC_BASE,
.end = DM644X_EMAC_BASE + 0x47ff,
.flags = IORESOURCE_MEM,
},
{
.start = IRQ_EMACINT,
.end = IRQ_EMACINT,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device dm644x_emac_device = {
.name = "davinci_emac",
.id = 1,
.num_resources = ARRAY_SIZE(dm644x_emac_resources),
.resource = dm644x_emac_resources,
};
#endif
/*
* Device specific mux setup
*
* soc description mux mode mode mux dbg
* reg offset mask mode
*/
static const struct mux_config dm644x_pins[] = {
MUX_CFG(DM644X, HDIREN, 0, 16, 1, 1, true)
MUX_CFG(DM644X, ATAEN, 0, 17, 1, 1, true)
MUX_CFG(DM644X, ATAEN_DISABLE, 0, 17, 1, 0, true)
MUX_CFG(DM644X, HPIEN_DISABLE, 0, 29, 1, 0, true)
MUX_CFG(DM644X, AEAW, 0, 0, 31, 31, true)
MUX_CFG(DM644X, MSTK, 1, 9, 1, 0, false)
MUX_CFG(DM644X, I2C, 1, 7, 1, 1, false)
MUX_CFG(DM644X, MCBSP, 1, 10, 1, 1, false)
MUX_CFG(DM644X, UART1, 1, 1, 1, 1, true)
MUX_CFG(DM644X, UART2, 1, 2, 1, 1, true)
MUX_CFG(DM644X, PWM0, 1, 4, 1, 1, false)
MUX_CFG(DM644X, PWM1, 1, 5, 1, 1, false)
MUX_CFG(DM644X, PWM2, 1, 6, 1, 1, false)
MUX_CFG(DM644X, VLYNQEN, 0, 15, 1, 1, false)
MUX_CFG(DM644X, VLSCREN, 0, 14, 1, 1, false)
MUX_CFG(DM644X, VLYNQWD, 0, 12, 3, 3, false)
MUX_CFG(DM644X, EMACEN, 0, 31, 1, 1, true)
MUX_CFG(DM644X, GPIO3V, 0, 31, 1, 0, true)
MUX_CFG(DM644X, GPIO0, 0, 24, 1, 0, true)
MUX_CFG(DM644X, GPIO3, 0, 25, 1, 0, false)
MUX_CFG(DM644X, GPIO43_44, 1, 7, 1, 0, false)
MUX_CFG(DM644X, GPIO46_47, 0, 22, 1, 0, true)
MUX_CFG(DM644X, RGB666, 0, 22, 1, 1, true)
MUX_CFG(DM644X, LOEEN, 0, 24, 1, 1, true)
MUX_CFG(DM644X, LFLDEN, 0, 25, 1, 1, false)
};
/*----------------------------------------------------------------------*/
static const s8 dma_chan_dm644x_no_event[] = {
0, 1, 12, 13, 14,
15, 25, 30, 31, 45,
46, 47, 55, 56, 57,
58, 59, 60, 61, 62,
63,
-1
};
static struct edma_soc_info dm644x_edma_info = {
.n_channel = 64,
.n_region = 4,
.n_slot = 128,
.n_tc = 2,
.noevent = dma_chan_dm644x_no_event,
};
static struct resource edma_resources[] = {
{
.name = "edma_cc",
.start = 0x01c00000,
.end = 0x01c00000 + SZ_64K - 1,
.flags = IORESOURCE_MEM,
},
{
.name = "edma_tc0",
.start = 0x01c10000,
.end = 0x01c10000 + SZ_1K - 1,
.flags = IORESOURCE_MEM,
},
{
.name = "edma_tc1",
.start = 0x01c10400,
.end = 0x01c10400 + SZ_1K - 1,
.flags = IORESOURCE_MEM,
},
{
.start = IRQ_CCINT0,
.flags = IORESOURCE_IRQ,
},
{
.start = IRQ_CCERRINT,
.flags = IORESOURCE_IRQ,
},
/* not using TC*_ERR */
};
static struct platform_device dm644x_edma_device = {
.name = "edma",
.id = -1,
.dev.platform_data = &dm644x_edma_info,
.num_resources = ARRAY_SIZE(edma_resources),
.resource = edma_resources,
};
/*----------------------------------------------------------------------*/
void __init dm644x_init(void)
{
davinci_clk_init(dm644x_clks);
davinci_mux_register(dm644x_pins, ARRAY_SIZE(dm644x_pins));
}
static int __init dm644x_init_devices(void)
{
if (!cpu_is_davinci_dm644x())
return 0;
platform_device_register(&dm644x_edma_device);
return 0;
}
postcore_initcall(dm644x_init_devices);

1135
arch/arm/mach-davinci/dma.c Normal file

File diff suppressed because it is too large Load Diff

View File

@ -20,6 +20,7 @@
#include <linux/irq.h>
#include <linux/bitops.h>
#include <mach/cputype.h>
#include <mach/irqs.h>
#include <mach/hardware.h>
#include <mach/gpio.h>
@ -36,9 +37,10 @@ struct davinci_gpio {
static struct davinci_gpio chips[DIV_ROUND_UP(DAVINCI_N_GPIO, 32)];
static unsigned __initdata ngpio;
/* create a non-inlined version */
static struct gpio_controller *__iomem __init gpio2controller(unsigned gpio)
static struct gpio_controller __iomem * __init gpio2controller(unsigned gpio)
{
return __gpio_to_controller(gpio);
}
@ -114,9 +116,30 @@ static int __init davinci_gpio_setup(void)
{
int i, base;
for (i = 0, base = 0;
i < ARRAY_SIZE(chips);
i++, base += 32) {
/* The gpio banks conceptually expose a segmented bitmap,
* and "ngpio" is one more than the largest zero-based
* bit index that's valid.
*/
if (cpu_is_davinci_dm355()) { /* or dm335() */
ngpio = 104;
} else if (cpu_is_davinci_dm644x()) { /* or dm337() */
ngpio = 71;
} else if (cpu_is_davinci_dm646x()) {
/* NOTE: each bank has several "reserved" bits,
* unusable as GPIOs. Only 33 of the GPIO numbers
* are usable, and we're not rejecting the others.
*/
ngpio = 43;
} else {
/* if cpu_is_davinci_dm643x() ngpio = 111 */
pr_err("GPIO setup: how many GPIOs?\n");
return -EINVAL;
}
if (WARN_ON(DAVINCI_N_GPIO < ngpio))
ngpio = DAVINCI_N_GPIO;
for (i = 0, base = 0; base < ngpio; i++, base += 32) {
chips[i].chip.label = "DaVinci";
chips[i].chip.direction_input = davinci_direction_in;
@ -125,7 +148,7 @@ static int __init davinci_gpio_setup(void)
chips[i].chip.set = davinci_gpio_set;
chips[i].chip.base = base;
chips[i].chip.ngpio = DAVINCI_N_GPIO - base;
chips[i].chip.ngpio = ngpio - base;
if (chips[i].chip.ngpio > 32)
chips[i].chip.ngpio = 32;
@ -143,11 +166,11 @@ pure_initcall(davinci_gpio_setup);
* We expect irqs will normally be set up as input pins, but they can also be
* used as output pins ... which is convenient for testing.
*
* NOTE: GPIO0..GPIO7 also have direct INTC hookups, which work in addition
* to their GPIOBNK0 irq (but with a bit less overhead). But we don't have
* a good way to hook those up ...
* NOTE: The first few GPIOs also have direct INTC hookups in addition
* to their GPIOBNK0 irq, with a bit less overhead but less flexibility
* on triggering (e.g. no edge options). We don't try to use those.
*
* All those INTC hookups (GPIO0..GPIO7 plus five IRQ banks) can also
* All those INTC hookups (direct, plus several IRQ banks) can also
* serve as EDMA event triggers.
*/
@ -235,29 +258,42 @@ gpio_irq_handler(unsigned irq, struct irq_desc *desc)
}
/*
* NOTE: for suspend/resume, probably best to make a sysdev (and class)
* with its suspend/resume calls hooking into the results of the set_wake()
* NOTE: for suspend/resume, probably best to make a platform_device with
* suspend_late/resume_resume calls hooking into results of the set_wake()
* calls ... so if no gpios are wakeup events the clock can be disabled,
* with outputs left at previously set levels, and so that VDD3P3V.IOPWDN0
* can be set appropriately for GPIOV33 pins.
* (dm6446) can be set appropriately for GPIOV33 pins.
*/
static int __init davinci_gpio_irq_setup(void)
{
unsigned gpio, irq, bank;
unsigned bank_irq;
struct clk *clk;
u32 binten = 0;
if (cpu_is_davinci_dm355()) { /* or dm335() */
bank_irq = IRQ_DM355_GPIOBNK0;
} else if (cpu_is_davinci_dm644x()) {
bank_irq = IRQ_GPIOBNK0;
} else if (cpu_is_davinci_dm646x()) {
bank_irq = IRQ_DM646X_GPIOBNK0;
} else {
printk(KERN_ERR "Don't know first GPIO bank IRQ.\n");
return -EINVAL;
}
clk = clk_get(NULL, "gpio");
if (IS_ERR(clk)) {
printk(KERN_ERR "Error %ld getting gpio clock?\n",
PTR_ERR(clk));
return 0;
return PTR_ERR(clk);
}
clk_enable(clk);
for (gpio = 0, irq = gpio_to_irq(0), bank = IRQ_GPIOBNK0;
gpio < DAVINCI_N_GPIO; bank++) {
for (gpio = 0, irq = gpio_to_irq(0), bank = 0;
gpio < ngpio;
bank++, bank_irq++) {
struct gpio_controller *__iomem g = gpio2controller(gpio);
unsigned i;
@ -265,28 +301,28 @@ static int __init davinci_gpio_irq_setup(void)
__raw_writel(~0, &g->clr_rising);
/* set up all irqs in this bank */
set_irq_chained_handler(bank, gpio_irq_handler);
set_irq_chip_data(bank, g);
set_irq_data(bank, (void *)irq);
set_irq_chained_handler(bank_irq, gpio_irq_handler);
set_irq_chip_data(bank_irq, g);
set_irq_data(bank_irq, (void *)irq);
for (i = 0; i < 16 && gpio < DAVINCI_N_GPIO;
i++, irq++, gpio++) {
for (i = 0; i < 16 && gpio < ngpio; i++, irq++, gpio++) {
set_irq_chip(irq, &gpio_irqchip);
set_irq_chip_data(irq, g);
set_irq_handler(irq, handle_simple_irq);
set_irq_flags(irq, IRQF_VALID);
}
binten |= BIT(bank);
}
/* BINTEN -- per-bank interrupt enable. genirq would also let these
* bits be set/cleared dynamically.
*/
__raw_writel(0x1f, (void *__iomem)
__raw_writel(binten, (void *__iomem)
IO_ADDRESS(DAVINCI_GPIO_BASE + 0x08));
printk(KERN_INFO "DaVinci: %d gpio irqs\n", irq - gpio_to_irq(0));
return 0;
}
arch_initcall(davinci_gpio_irq_setup);

View File

@ -15,7 +15,9 @@
#include <linux/init.h>
#include <linux/io.h>
#define JTAG_ID_BASE 0x01c40028
#define JTAG_ID_BASE IO_ADDRESS(0x01c40028)
static unsigned int davinci_revision;
struct davinci_id {
u8 variant; /* JTAG ID bits 31:28 */
@ -33,6 +35,20 @@ static struct davinci_id davinci_ids[] __initdata = {
.manufacturer = 0x017,
.type = 0x64460000,
},
{
/* DM646X */
.part_no = 0xb770,
.variant = 0x0,
.manufacturer = 0x017,
.type = 0x64670000,
},
{
/* DM355 */
.part_no = 0xb73b,
.variant = 0x0,
.manufacturer = 0x00f,
.type = 0x03550000,
},
};
/*
@ -42,7 +58,7 @@ static u16 __init davinci_get_part_no(void)
{
u32 dev_id, part_no;
dev_id = davinci_readl(JTAG_ID_BASE);
dev_id = __raw_readl(JTAG_ID_BASE);
part_no = ((dev_id >> 12) & 0xffff);
@ -56,13 +72,19 @@ static u8 __init davinci_get_variant(void)
{
u32 variant;
variant = davinci_readl(JTAG_ID_BASE);
variant = __raw_readl(JTAG_ID_BASE);
variant = (variant >> 28) & 0xf;
return variant;
}
unsigned int davinci_rev(void)
{
return davinci_revision >> 16;
}
EXPORT_SYMBOL(davinci_rev);
void __init davinci_check_revision(void)
{
int i;
@ -75,7 +97,7 @@ void __init davinci_check_revision(void)
/* First check only the major version in a safe way */
for (i = 0; i < ARRAY_SIZE(davinci_ids); i++) {
if (part_no == (davinci_ids[i].part_no)) {
system_rev = davinci_ids[i].type;
davinci_revision = davinci_ids[i].type;
break;
}
}
@ -84,10 +106,11 @@ void __init davinci_check_revision(void)
for (i = 0; i < ARRAY_SIZE(davinci_ids); i++) {
if (part_no == davinci_ids[i].part_no &&
variant == davinci_ids[i].variant) {
system_rev = davinci_ids[i].type;
davinci_revision = davinci_ids[i].type;
break;
}
}
printk("DaVinci DM%04x variant 0x%x\n", system_rev >> 16, variant);
printk(KERN_INFO "DaVinci DM%04x variant 0x%x\n",
davinci_rev(), variant);
}

View File

@ -0,0 +1,20 @@
/*
* DaVinci DM6446 EVM board specific headers
*
* Author: Kevin Hilman, Deep Root Systems, LLC
*
* 2007 (c) Deep Root Systems, LLC. This file is licensed under
* the terms of the GNU General Public License version 2. This program
* is licensed "as is" without any warranty of any kind, whether express
* or ifndef.
*/
#ifndef _MACH_DAVINCI_DM6446EVM_H
#define _MACH_DAVINCI_DM6446EVM_H
#include <linux/types.h>
int dm6446evm_eeprom_read(char *buf, off_t off, size_t count);
int dm6446evm_eeprom_write(char *buf, off_t off, size_t count);
#endif

View File

@ -0,0 +1,13 @@
#ifndef __MACH_CLKDEV_H
#define __MACH_CLKDEV_H
static inline int __clk_get(struct clk *clk)
{
return 1;
}
static inline void __clk_put(struct clk *clk)
{
}
#endif

View File

@ -17,6 +17,5 @@ struct clk;
extern int clk_register(struct clk *clk);
extern void clk_unregister(struct clk *clk);
extern int davinci_clk_init(void);
#endif

View File

@ -16,6 +16,12 @@ struct sys_timer;
extern struct sys_timer davinci_timer;
extern void davinci_irq_init(void);
extern void davinci_map_common_io(void);
/* parameters describe VBUS sourcing for host mode */
extern void setup_usb(unsigned mA, unsigned potpgt_msec);
/* parameters describe VBUS sourcing for host mode */
extern void setup_usb(unsigned mA, unsigned potpgt_msec);

View File

@ -0,0 +1,49 @@
/*
* DaVinci CPU type detection
*
* Author: Kevin Hilman, Deep Root Systems, LLC
*
* Defines the cpu_is_*() macros for runtime detection of DaVinci
* device type. In addtion, if support for a given device is not
* compiled in to the kernel, the macros return 0 so that
* resulting code can be optimized out.
*
* 2009 (c) Deep Root Systems, LLC. This file is licensed under
* the terms of the GNU General Public License version 2. This program
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
*/
#ifndef _ASM_ARCH_CPU_H
#define _ASM_ARCH_CPU_H
extern unsigned int davinci_rev(void);
#define IS_DAVINCI_CPU(type, id) \
static inline int is_davinci_dm ##type(void) \
{ \
return (davinci_rev() == (id)) ? 1 : 0; \
}
IS_DAVINCI_CPU(644x, 0x6446)
IS_DAVINCI_CPU(646x, 0x6467)
IS_DAVINCI_CPU(355, 0x355)
#ifdef CONFIG_ARCH_DAVINCI_DM644x
#define cpu_is_davinci_dm644x() is_davinci_dm644x()
#else
#define cpu_is_davinci_dm644x() 0
#endif
#ifdef CONFIG_ARCH_DAVINCI_DM646x
#define cpu_is_davinci_dm646x() is_davinci_dm646x()
#else
#define cpu_is_davinci_dm646x() 0
#endif
#ifdef CONFIG_ARCH_DAVINCI_DM355
#define cpu_is_davinci_dm355() is_davinci_dm355()
#else
#define cpu_is_davinci_dm355() 0
#endif
#endif

View File

@ -0,0 +1,37 @@
/*
* This file contains the processor specific definitions
* of the TI DM644x.
*
* Copyright (C) 2008 Texas Instruments.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
*/
#ifndef __ASM_ARCH_DM644X_H
#define __ASM_ARCH_DM644X_H
#include <linux/platform_device.h>
#include <mach/hardware.h>
#define DM644X_EMAC_BASE (0x01C80000)
#define DM644X_EMAC_CNTRL_OFFSET (0x0000)
#define DM644X_EMAC_CNTRL_MOD_OFFSET (0x1000)
#define DM644X_EMAC_CNTRL_RAM_OFFSET (0x2000)
#define DM644X_EMAC_MDIO_OFFSET (0x4000)
#define DM644X_EMAC_CNTRL_RAM_SIZE (0x2000)
void __init dm644x_init(void);
#endif /* __ASM_ARCH_DM644X_H */

View File

@ -0,0 +1,228 @@
/*
* TI DAVINCI dma definitions
*
* Copyright (C) 2006-2009 Texas Instruments.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*
*/
/*
* This EDMA3 programming framework exposes two basic kinds of resource:
*
* Channel Triggers transfers, usually from a hardware event but
* also manually or by "chaining" from DMA completions.
* Each channel is coupled to a Parameter RAM (PaRAM) slot.
*
* Slot Each PaRAM slot holds a DMA transfer descriptor (PaRAM
* "set"), source and destination addresses, a link to a
* next PaRAM slot (if any), options for the transfer, and
* instructions for updating those addresses. There are
* more than twice as many slots as event channels.
*
* Each PaRAM set describes a sequence of transfers, either for one large
* buffer or for several discontiguous smaller buffers. An EDMA transfer
* is driven only from a channel, which performs the transfers specified
* in its PaRAM slot until there are no more transfers. When that last
* transfer completes, the "link" field may be used to reload the channel's
* PaRAM slot with a new transfer descriptor.
*
* The EDMA Channel Controller (CC) maps requests from channels into physical
* Transfer Controller (TC) requests when the channel triggers (by hardware
* or software events, or by chaining). The two physical DMA channels provided
* by the TCs are thus shared by many logical channels.
*
* DaVinci hardware also has a "QDMA" mechanism which is not currently
* supported through this interface. (DSP firmware uses it though.)
*/
#ifndef EDMA_H_
#define EDMA_H_
/* PaRAM slots are laid out like this */
struct edmacc_param {
unsigned int opt;
unsigned int src;
unsigned int a_b_cnt;
unsigned int dst;
unsigned int src_dst_bidx;
unsigned int link_bcntrld;
unsigned int src_dst_cidx;
unsigned int ccnt;
};
#define CCINT0_INTERRUPT 16
#define CCERRINT_INTERRUPT 17
#define TCERRINT0_INTERRUPT 18
#define TCERRINT1_INTERRUPT 19
/* fields in edmacc_param.opt */
#define SAM BIT(0)
#define DAM BIT(1)
#define SYNCDIM BIT(2)
#define STATIC BIT(3)
#define EDMA_FWID (0x07 << 8)
#define TCCMODE BIT(11)
#define EDMA_TCC(t) ((t) << 12)
#define TCINTEN BIT(20)
#define ITCINTEN BIT(21)
#define TCCHEN BIT(22)
#define ITCCHEN BIT(23)
#define TRWORD (0x7<<2)
#define PAENTRY (0x1ff<<5)
/* Drivers should avoid using these symbolic names for dm644x
* channels, and use platform_device IORESOURCE_DMA resources
* instead. (Other DaVinci chips have different peripherals
* and thus have different DMA channel mappings.)
*/
#define DAVINCI_DMA_MCBSP_TX 2
#define DAVINCI_DMA_MCBSP_RX 3
#define DAVINCI_DMA_VPSS_HIST 4
#define DAVINCI_DMA_VPSS_H3A 5
#define DAVINCI_DMA_VPSS_PRVU 6
#define DAVINCI_DMA_VPSS_RSZ 7
#define DAVINCI_DMA_IMCOP_IMXINT 8
#define DAVINCI_DMA_IMCOP_VLCDINT 9
#define DAVINCI_DMA_IMCO_PASQINT 10
#define DAVINCI_DMA_IMCOP_DSQINT 11
#define DAVINCI_DMA_SPI_SPIX 16
#define DAVINCI_DMA_SPI_SPIR 17
#define DAVINCI_DMA_UART0_URXEVT0 18
#define DAVINCI_DMA_UART0_UTXEVT0 19
#define DAVINCI_DMA_UART1_URXEVT1 20
#define DAVINCI_DMA_UART1_UTXEVT1 21
#define DAVINCI_DMA_UART2_URXEVT2 22
#define DAVINCI_DMA_UART2_UTXEVT2 23
#define DAVINCI_DMA_MEMSTK_MSEVT 24
#define DAVINCI_DMA_MMCRXEVT 26
#define DAVINCI_DMA_MMCTXEVT 27
#define DAVINCI_DMA_I2C_ICREVT 28
#define DAVINCI_DMA_I2C_ICXEVT 29
#define DAVINCI_DMA_GPIO_GPINT0 32
#define DAVINCI_DMA_GPIO_GPINT1 33
#define DAVINCI_DMA_GPIO_GPINT2 34
#define DAVINCI_DMA_GPIO_GPINT3 35
#define DAVINCI_DMA_GPIO_GPINT4 36
#define DAVINCI_DMA_GPIO_GPINT5 37
#define DAVINCI_DMA_GPIO_GPINT6 38
#define DAVINCI_DMA_GPIO_GPINT7 39
#define DAVINCI_DMA_GPIO_GPBNKINT0 40
#define DAVINCI_DMA_GPIO_GPBNKINT1 41
#define DAVINCI_DMA_GPIO_GPBNKINT2 42
#define DAVINCI_DMA_GPIO_GPBNKINT3 43
#define DAVINCI_DMA_GPIO_GPBNKINT4 44
#define DAVINCI_DMA_TIMER0_TINT0 48
#define DAVINCI_DMA_TIMER1_TINT1 49
#define DAVINCI_DMA_TIMER2_TINT2 50
#define DAVINCI_DMA_TIMER3_TINT3 51
#define DAVINCI_DMA_PWM0 52
#define DAVINCI_DMA_PWM1 53
#define DAVINCI_DMA_PWM2 54
/*ch_status paramater of callback function possible values*/
#define DMA_COMPLETE 1
#define DMA_CC_ERROR 2
#define DMA_TC1_ERROR 3
#define DMA_TC2_ERROR 4
enum address_mode {
INCR = 0,
FIFO = 1
};
enum fifo_width {
W8BIT = 0,
W16BIT = 1,
W32BIT = 2,
W64BIT = 3,
W128BIT = 4,
W256BIT = 5
};
enum dma_event_q {
EVENTQ_0 = 0,
EVENTQ_1 = 1,
EVENTQ_DEFAULT = -1
};
enum sync_dimension {
ASYNC = 0,
ABSYNC = 1
};
#define EDMA_CHANNEL_ANY -1 /* for edma_alloc_channel() */
#define EDMA_SLOT_ANY -1 /* for edma_alloc_slot() */
/* alloc/free DMA channels and their dedicated parameter RAM slots */
int edma_alloc_channel(int channel,
void (*callback)(unsigned channel, u16 ch_status, void *data),
void *data, enum dma_event_q);
void edma_free_channel(unsigned channel);
/* alloc/free parameter RAM slots */
int edma_alloc_slot(int slot);
void edma_free_slot(unsigned slot);
/* calls that operate on part of a parameter RAM slot */
void edma_set_src(unsigned slot, dma_addr_t src_port,
enum address_mode mode, enum fifo_width);
void edma_set_dest(unsigned slot, dma_addr_t dest_port,
enum address_mode mode, enum fifo_width);
void edma_get_position(unsigned slot, dma_addr_t *src, dma_addr_t *dst);
void edma_set_src_index(unsigned slot, s16 src_bidx, s16 src_cidx);
void edma_set_dest_index(unsigned slot, s16 dest_bidx, s16 dest_cidx);
void edma_set_transfer_params(unsigned slot, u16 acnt, u16 bcnt, u16 ccnt,
u16 bcnt_rld, enum sync_dimension sync_mode);
void edma_link(unsigned from, unsigned to);
void edma_unlink(unsigned from);
/* calls that operate on an entire parameter RAM slot */
void edma_write_slot(unsigned slot, const struct edmacc_param *params);
void edma_read_slot(unsigned slot, struct edmacc_param *params);
/* channel control operations */
int edma_start(unsigned channel);
void edma_stop(unsigned channel);
void edma_clean_channel(unsigned channel);
void edma_clear_event(unsigned channel);
void edma_pause(unsigned channel);
void edma_resume(unsigned channel);
/* UNRELATED TO DMA */
int davinci_alloc_iram(unsigned size);
void davinci_free_iram(unsigned addr, unsigned size);
/* platform_data for EDMA driver */
struct edma_soc_info {
/* how many dma resources of each type */
unsigned n_channel;
unsigned n_region;
unsigned n_slot;
unsigned n_tc;
/* list of channels with no even trigger; terminated by "-1" */
const s8 *noevent;
};
#endif

View File

@ -15,9 +15,11 @@
#include <linux/io.h>
#include <asm-generic/gpio.h>
#include <mach/hardware.h>
#include <mach/irqs.h>
#define DAVINCI_GPIO_BASE 0x01C67000
/*
* basic gpio routines
*
@ -26,23 +28,18 @@
* go through boot loaders.
*
* the gpio clock will be turned on when gpios are used, and you may also
* need to pay attention to PINMUX0 and PINMUX1 to be sure those pins are
* need to pay attention to PINMUX registers to be sure those pins are
* used as gpios, not with other peripherals.
*
* On-chip GPIOs are numbered 0..(DAVINCI_N_GPIO-1). For documentation,
* and maybe for later updates, code should write GPIO(N) or:
* - GPIOV18(N) for 1.8V pins, N in 0..53; same as GPIO(0)..GPIO(53)
* - GPIOV33(N) for 3.3V pins, N in 0..17; same as GPIO(54)..GPIO(70)
*
* For GPIO IRQs use gpio_to_irq(GPIO(N)) or gpio_to_irq(GPIOV33(N)) etc
* for now, that's != GPIO(N)
* and maybe for later updates, code may write GPIO(N). These may be
* all 1.8V signals, all 3.3V ones, or a mix of the two. A given chip
* may not support all the GPIOs in that range.
*
* GPIOs can also be on external chips, numbered after the ones built-in
* to the DaVinci chip. For now, they won't be usable as IRQ sources.
*/
#define GPIO(X) (X) /* 0 <= X <= 70 */
#define GPIOV18(X) (X) /* 1.8V i/o; 0 <= X <= 53 */
#define GPIOV33(X) ((X)+54) /* 3.3V i/o; 0 <= X <= 17 */
#define GPIO(X) (X) /* 0 <= X <= (DAVINCI_N_GPIO - 1) */
struct gpio_controller {
u32 dir;
@ -71,12 +68,14 @@ __gpio_to_controller(unsigned gpio)
{
void *__iomem ptr;
if (gpio < 32)
if (gpio < 32 * 1)
ptr = IO_ADDRESS(DAVINCI_GPIO_BASE + 0x10);
else if (gpio < 64)
else if (gpio < 32 * 2)
ptr = IO_ADDRESS(DAVINCI_GPIO_BASE + 0x38);
else if (gpio < DAVINCI_N_GPIO)
else if (gpio < 32 * 3)
ptr = IO_ADDRESS(DAVINCI_GPIO_BASE + 0x60);
else if (gpio < 32 * 4)
ptr = IO_ADDRESS(DAVINCI_GPIO_BASE + 0x88);
else
ptr = NULL;
return ptr;

View File

@ -1,9 +1,9 @@
/*
* Common hardware definitions
* Hardware definitions common to all DaVinci family processors
*
* Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
* Author: Kevin Hilman, Deep Root Systems, LLC
*
* 2007 (c) MontaVista Software, Inc. This file is licensed under
* 2007 (c) Deep Root Systems, LLC. This file is licensed under
* the terms of the GNU General Public License version 2. This program
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
@ -12,41 +12,16 @@
#define __ASM_ARCH_HARDWARE_H
/*
* Base register addresses
* Before you add anything to ths file:
*
* This header is for defines common to ALL DaVinci family chips.
* Anything that is chip specific should go in <chipname>.h,
* and the chip/board init code should then explicitly include
* <chipname>.h
*/
#define DAVINCI_DMA_3PCC_BASE (0x01C00000)
#define DAVINCI_DMA_3PTC0_BASE (0x01C10000)
#define DAVINCI_DMA_3PTC1_BASE (0x01C10400)
#define DAVINCI_I2C_BASE (0x01C21000)
#define DAVINCI_PWM0_BASE (0x01C22000)
#define DAVINCI_PWM1_BASE (0x01C22400)
#define DAVINCI_PWM2_BASE (0x01C22800)
#define DAVINCI_SYSTEM_MODULE_BASE (0x01C40000)
#define DAVINCI_PLL_CNTRL0_BASE (0x01C40800)
#define DAVINCI_PLL_CNTRL1_BASE (0x01C40C00)
#define DAVINCI_PWR_SLEEP_CNTRL_BASE (0x01C41000)
#define DAVINCI_SYSTEM_DFT_BASE (0x01C42000)
#define DAVINCI_IEEE1394_BASE (0x01C60000)
#define DAVINCI_USB_OTG_BASE (0x01C64000)
#define DAVINCI_CFC_ATA_BASE (0x01C66000)
#define DAVINCI_SPI_BASE (0x01C66800)
#define DAVINCI_GPIO_BASE (0x01C67000)
#define DAVINCI_UHPI_BASE (0x01C67800)
#define DAVINCI_VPSS_REGS_BASE (0x01C70000)
#define DAVINCI_EMAC_CNTRL_REGS_BASE (0x01C80000)
#define DAVINCI_EMAC_WRAPPER_CNTRL_REGS_BASE (0x01C81000)
#define DAVINCI_EMAC_WRAPPER_RAM_BASE (0x01C82000)
#define DAVINCI_MDIO_CNTRL_REGS_BASE (0x01C84000)
#define DAVINCI_IMCOP_BASE (0x01CC0000)
#define DAVINCI_ASYNC_EMIF_CNTRL_BASE (0x01E00000)
#define DAVINCI_VLYNQ_BASE (0x01E01000)
#define DAVINCI_MCBSP_BASE (0x01E02000)
#define DAVINCI_MMC_SD_BASE (0x01E10000)
#define DAVINCI_MS_BASE (0x01E20000)
#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE (0x02000000)
#define DAVINCI_ASYNC_EMIF_DATA_CE1_BASE (0x04000000)
#define DAVINCI_ASYNC_EMIF_DATA_CE2_BASE (0x06000000)
#define DAVINCI_ASYNC_EMIF_DATA_CE3_BASE (0x08000000)
#define DAVINCI_VLYNQ_REMOTE_BASE (0x0C000000)
#define DAVINCI_SYSTEM_MODULE_BASE 0x01C40000
/* System control register offsets */
#define DM64XX_VDD3P3V_PWDN 0x48
#endif /* __ASM_ARCH_HARDWARE_H */

View File

@ -40,22 +40,12 @@
#else
#define IOMEM(x) ((void __force __iomem *)(x))
/*
* Functions to access the DaVinci IO region
*
* NOTE: - Use davinci_read/write[bwl] for physical register addresses
* - Use __raw_read/write[bwl]() for virtual register addresses
* - Use IO_ADDRESS(phys_addr) to convert registers to virtual addresses
* - DO NOT use hardcoded virtual addresses to allow changing the
* IO address space again if needed
*/
#define davinci_readb(a) __raw_readb(IO_ADDRESS(a))
#define davinci_readw(a) __raw_readw(IO_ADDRESS(a))
#define davinci_readl(a) __raw_readl(IO_ADDRESS(a))
#define __arch_ioremap(p, s, t) davinci_ioremap(p, s, t)
#define __arch_iounmap(v) davinci_iounmap(v)
#define davinci_writeb(v, a) __raw_writeb(v, IO_ADDRESS(a))
#define davinci_writew(v, a) __raw_writew(v, IO_ADDRESS(a))
#define davinci_writel(v, a) __raw_writel(v, IO_ADDRESS(a))
void __iomem *davinci_ioremap(unsigned long phys, size_t size,
unsigned int type);
void davinci_iounmap(volatile void __iomem *addr);
#endif /* __ASSEMBLER__ */
#endif /* __ASM_ARCH_IO_H */

View File

@ -96,10 +96,111 @@
#define IRQ_EMUINT 63
#define DAVINCI_N_AINTC_IRQ 64
#define DAVINCI_N_GPIO 71
#define DAVINCI_N_GPIO 104
#define NR_IRQS (DAVINCI_N_AINTC_IRQ + DAVINCI_N_GPIO)
#define ARCH_TIMER_IRQ IRQ_TINT1_TINT34
/* DaVinci DM6467-specific Interrupts */
#define IRQ_DM646X_VP_VERTINT0 0
#define IRQ_DM646X_VP_VERTINT1 1
#define IRQ_DM646X_VP_VERTINT2 2
#define IRQ_DM646X_VP_VERTINT3 3
#define IRQ_DM646X_VP_ERRINT 4
#define IRQ_DM646X_RESERVED_1 5
#define IRQ_DM646X_RESERVED_2 6
#define IRQ_DM646X_WDINT 7
#define IRQ_DM646X_CRGENINT0 8
#define IRQ_DM646X_CRGENINT1 9
#define IRQ_DM646X_TSIFINT0 10
#define IRQ_DM646X_TSIFINT1 11
#define IRQ_DM646X_VDCEINT 12
#define IRQ_DM646X_USBINT 13
#define IRQ_DM646X_USBDMAINT 14
#define IRQ_DM646X_PCIINT 15
#define IRQ_DM646X_TCERRINT2 20
#define IRQ_DM646X_TCERRINT3 21
#define IRQ_DM646X_IDE 22
#define IRQ_DM646X_HPIINT 23
#define IRQ_DM646X_EMACRXTHINT 24
#define IRQ_DM646X_EMACRXINT 25
#define IRQ_DM646X_EMACTXINT 26
#define IRQ_DM646X_EMACMISCINT 27
#define IRQ_DM646X_MCASP0TXINT 28
#define IRQ_DM646X_MCASP0RXINT 29
#define IRQ_DM646X_RESERVED_3 31
#define IRQ_DM646X_MCASP1TXINT 32
#define IRQ_DM646X_VLQINT 38
#define IRQ_DM646X_UARTINT2 42
#define IRQ_DM646X_SPINT0 43
#define IRQ_DM646X_SPINT1 44
#define IRQ_DM646X_DSP2ARMINT 45
#define IRQ_DM646X_RESERVED_4 46
#define IRQ_DM646X_PSCINT 47
#define IRQ_DM646X_GPIO0 48
#define IRQ_DM646X_GPIO1 49
#define IRQ_DM646X_GPIO2 50
#define IRQ_DM646X_GPIO3 51
#define IRQ_DM646X_GPIO4 52
#define IRQ_DM646X_GPIO5 53
#define IRQ_DM646X_GPIO6 54
#define IRQ_DM646X_GPIO7 55
#define IRQ_DM646X_GPIOBNK0 56
#define IRQ_DM646X_GPIOBNK1 57
#define IRQ_DM646X_GPIOBNK2 58
#define IRQ_DM646X_DDRINT 59
#define IRQ_DM646X_AEMIFINT 60
/* DaVinci DM355-specific Interrupts */
#define IRQ_DM355_CCDC_VDINT0 0
#define IRQ_DM355_CCDC_VDINT1 1
#define IRQ_DM355_CCDC_VDINT2 2
#define IRQ_DM355_IPIPE_HST 3
#define IRQ_DM355_H3AINT 4
#define IRQ_DM355_IPIPE_SDR 5
#define IRQ_DM355_IPIPEIFINT 6
#define IRQ_DM355_OSDINT 7
#define IRQ_DM355_VENCINT 8
#define IRQ_DM355_IMCOPINT 11
#define IRQ_DM355_RTOINT 13
#define IRQ_DM355_TINT4 13
#define IRQ_DM355_TINT2_TINT12 13
#define IRQ_DM355_UARTINT2 14
#define IRQ_DM355_TINT5 14
#define IRQ_DM355_TINT2_TINT34 14
#define IRQ_DM355_TINT6 15
#define IRQ_DM355_TINT3_TINT12 15
#define IRQ_DM355_SPINT1_0 17
#define IRQ_DM355_SPINT1_1 18
#define IRQ_DM355_SPINT2_0 19
#define IRQ_DM355_SPINT2_1 21
#define IRQ_DM355_TINT7 22
#define IRQ_DM355_TINT3_TINT34 22
#define IRQ_DM355_SDIOINT0 23
#define IRQ_DM355_MMCINT0 26
#define IRQ_DM355_MSINT 26
#define IRQ_DM355_MMCINT1 27
#define IRQ_DM355_PWMINT3 28
#define IRQ_DM355_SDIOINT1 31
#define IRQ_DM355_SPINT0_0 42
#define IRQ_DM355_SPINT0_1 43
#define IRQ_DM355_GPIO0 44
#define IRQ_DM355_GPIO1 45
#define IRQ_DM355_GPIO2 46
#define IRQ_DM355_GPIO3 47
#define IRQ_DM355_GPIO4 48
#define IRQ_DM355_GPIO5 49
#define IRQ_DM355_GPIO6 50
#define IRQ_DM355_GPIO7 51
#define IRQ_DM355_GPIO8 52
#define IRQ_DM355_GPIO9 53
#define IRQ_DM355_GPIOBNK0 54
#define IRQ_DM355_GPIOBNK1 55
#define IRQ_DM355_GPIOBNK2 56
#define IRQ_DM355_GPIOBNK3 57
#define IRQ_DM355_GPIOBNK4 58
#define IRQ_DM355_GPIOBNK5 59
#define IRQ_DM355_GPIOBNK6 60
#endif /* __ASM_ARCH_IRQS_H */

View File

@ -1,55 +1,183 @@
/*
* DaVinci pin multiplexing defines
* Table of the DAVINCI register configurations for the PINMUX combinations
*
* Author: Vladimir Barinov, MontaVista Software, Inc. <source@mvista.com>
*
* Based on linux/include/asm-arm/arch-omap/mux.h:
* Copyright (C) 2003 - 2005 Nokia Corporation
*
* Written by Tony Lindgren
*
* 2007 (c) MontaVista Software, Inc. This file is licensed under
* the terms of the GNU General Public License version 2. This program
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
*
* Copyright (C) 2008 Texas Instruments.
*/
#ifndef __ASM_ARCH_MUX_H
#define __ASM_ARCH_MUX_H
#define DAVINCI_MUX_AEAW0 0
#define DAVINCI_MUX_AEAW1 1
#define DAVINCI_MUX_AEAW2 2
#define DAVINCI_MUX_AEAW3 3
#define DAVINCI_MUX_AEAW4 4
#define DAVINCI_MUX_AECS4 10
#define DAVINCI_MUX_AECS5 11
#define DAVINCI_MUX_VLYNQWD0 12
#define DAVINCI_MUX_VLYNQWD1 13
#define DAVINCI_MUX_VLSCREN 14
#define DAVINCI_MUX_VLYNQEN 15
#define DAVINCI_MUX_HDIREN 16
#define DAVINCI_MUX_ATAEN 17
#define DAVINCI_MUX_RGB666 22
#define DAVINCI_MUX_RGB888 23
#define DAVINCI_MUX_LOEEN 24
#define DAVINCI_MUX_LFLDEN 25
#define DAVINCI_MUX_CWEN 26
#define DAVINCI_MUX_CFLDEN 27
#define DAVINCI_MUX_HPIEN 29
#define DAVINCI_MUX_1394EN 30
#define DAVINCI_MUX_EMACEN 31
#ifndef __INC_MACH_MUX_H
#define __INC_MACH_MUX_H
#define DAVINCI_MUX_LEVEL2 32
#define DAVINCI_MUX_UART0 (DAVINCI_MUX_LEVEL2 + 0)
#define DAVINCI_MUX_UART1 (DAVINCI_MUX_LEVEL2 + 1)
#define DAVINCI_MUX_UART2 (DAVINCI_MUX_LEVEL2 + 2)
#define DAVINCI_MUX_U2FLO (DAVINCI_MUX_LEVEL2 + 3)
#define DAVINCI_MUX_PWM0 (DAVINCI_MUX_LEVEL2 + 4)
#define DAVINCI_MUX_PWM1 (DAVINCI_MUX_LEVEL2 + 5)
#define DAVINCI_MUX_PWM2 (DAVINCI_MUX_LEVEL2 + 6)
#define DAVINCI_MUX_I2C (DAVINCI_MUX_LEVEL2 + 7)
#define DAVINCI_MUX_SPI (DAVINCI_MUX_LEVEL2 + 8)
#define DAVINCI_MUX_MSTK (DAVINCI_MUX_LEVEL2 + 9)
#define DAVINCI_MUX_ASP (DAVINCI_MUX_LEVEL2 + 10)
#define DAVINCI_MUX_CLK0 (DAVINCI_MUX_LEVEL2 + 16)
#define DAVINCI_MUX_CLK1 (DAVINCI_MUX_LEVEL2 + 17)
#define DAVINCI_MUX_TIMIN (DAVINCI_MUX_LEVEL2 + 18)
/* System module registers */
#define PINMUX0 0x00
#define PINMUX1 0x04
/* dm355 only */
#define PINMUX2 0x08
#define PINMUX3 0x0c
#define PINMUX4 0x10
#define INTMUX 0x18
#define EVTMUX 0x1c
extern void davinci_mux_peripheral(unsigned int mux, unsigned int enable);
struct mux_config {
const char *name;
const char *mux_reg_name;
const unsigned char mux_reg;
const unsigned char mask_offset;
const unsigned char mask;
const unsigned char mode;
bool debug;
};
#endif /* __ASM_ARCH_MUX_H */
enum davinci_dm644x_index {
/* ATA and HDDIR functions */
DM644X_HDIREN,
DM644X_ATAEN,
DM644X_ATAEN_DISABLE,
/* HPI functions */
DM644X_HPIEN_DISABLE,
/* AEAW functions */
DM644X_AEAW,
/* Memory Stick */
DM644X_MSTK,
/* I2C */
DM644X_I2C,
/* ASP function */
DM644X_MCBSP,
/* UART1 */
DM644X_UART1,
/* UART2 */
DM644X_UART2,
/* PWM0 */
DM644X_PWM0,
/* PWM1 */
DM644X_PWM1,
/* PWM2 */
DM644X_PWM2,
/* VLYNQ function */
DM644X_VLYNQEN,
DM644X_VLSCREN,
DM644X_VLYNQWD,
/* EMAC and MDIO function */
DM644X_EMACEN,
/* GPIO3V[0:16] pins */
DM644X_GPIO3V,
/* GPIO pins */
DM644X_GPIO0,
DM644X_GPIO3,
DM644X_GPIO43_44,
DM644X_GPIO46_47,
/* VPBE */
DM644X_RGB666,
/* LCD */
DM644X_LOEEN,
DM644X_LFLDEN,
};
enum davinci_dm646x_index {
/* ATA function */
DM646X_ATAEN,
/* AUDIO Clock */
DM646X_AUDCK1,
DM646X_AUDCK0,
/* CRGEN Control */
DM646X_CRGMUX,
/* VPIF Control */
DM646X_STSOMUX_DISABLE,
DM646X_STSIMUX_DISABLE,
DM646X_PTSOMUX_DISABLE,
DM646X_PTSIMUX_DISABLE,
/* TSIF Control */
DM646X_STSOMUX,
DM646X_STSIMUX,
DM646X_PTSOMUX_PARALLEL,
DM646X_PTSIMUX_PARALLEL,
DM646X_PTSOMUX_SERIAL,
DM646X_PTSIMUX_SERIAL,
};
enum davinci_dm355_index {
/* MMC/SD 0 */
DM355_MMCSD0,
/* MMC/SD 1 */
DM355_SD1_CLK,
DM355_SD1_CMD,
DM355_SD1_DATA3,
DM355_SD1_DATA2,
DM355_SD1_DATA1,
DM355_SD1_DATA0,
/* I2C */
DM355_I2C_SDA,
DM355_I2C_SCL,
/* ASP0 function */
DM355_MCBSP0_BDX,
DM355_MCBSP0_X,
DM355_MCBSP0_BFSX,
DM355_MCBSP0_BDR,
DM355_MCBSP0_R,
DM355_MCBSP0_BFSR,
/* SPI0 */
DM355_SPI0_SDI,
DM355_SPI0_SDENA0,
DM355_SPI0_SDENA1,
/* IRQ muxing */
DM355_INT_EDMA_CC,
DM355_INT_EDMA_TC0_ERR,
DM355_INT_EDMA_TC1_ERR,
/* EDMA event muxing */
DM355_EVT8_ASP1_TX,
DM355_EVT9_ASP1_RX,
DM355_EVT26_MMC0_RX,
};
#ifdef CONFIG_DAVINCI_MUX
/* setup pin muxing */
extern void davinci_mux_init(void);
extern int davinci_mux_register(const struct mux_config *pins,
unsigned long size);
extern int davinci_cfg_reg(unsigned long reg_cfg);
#else
/* boot loader does it all (no warnings from CONFIG_DAVINCI_MUX_WARNINGS) */
static inline void davinci_mux_init(void) {}
static inline int davinci_mux_register(const struct mux_config *pins,
unsigned long size) { return 0; }
static inline int davinci_cfg_reg(unsigned long reg_cfg) { return 0; }
#endif
#endif /* __INC_MACH_MUX_H */

View File

@ -38,8 +38,6 @@
#define DAVINCI_LPSC_TPTC1 4
#define DAVINCI_LPSC_EMAC 5
#define DAVINCI_LPSC_EMAC_WRAPPER 6
#define DAVINCI_LPSC_MDIO 7
#define DAVINCI_LPSC_IEEE1394 8
#define DAVINCI_LPSC_USB 9
#define DAVINCI_LPSC_ATA 10
#define DAVINCI_LPSC_VLYNQ 11
@ -47,7 +45,6 @@
#define DAVINCI_LPSC_DDR_EMIF 13
#define DAVINCI_LPSC_AEMIF 14
#define DAVINCI_LPSC_MMC_SD 15
#define DAVINCI_LPSC_MEMSTICK 16
#define DAVINCI_LPSC_McBSP 17
#define DAVINCI_LPSC_I2C 18
#define DAVINCI_LPSC_UART0 19
@ -73,4 +70,54 @@
#define DAVINCI_LPSC_GEM 39
#define DAVINCI_LPSC_IMCOP 40
#define DM355_LPSC_TIMER3 5
#define DM355_LPSC_SPI1 6
#define DM355_LPSC_MMC_SD1 7
#define DM355_LPSC_McBSP1 8
#define DM355_LPSC_PWM3 10
#define DM355_LPSC_SPI2 11
#define DM355_LPSC_RTO 12
#define DM355_LPSC_VPSS_DAC 41
/*
* LPSC Assignments
*/
#define DM646X_LPSC_ARM 0
#define DM646X_LPSC_C64X_CPU 1
#define DM646X_LPSC_HDVICP0 2
#define DM646X_LPSC_HDVICP1 3
#define DM646X_LPSC_TPCC 4
#define DM646X_LPSC_TPTC0 5
#define DM646X_LPSC_TPTC1 6
#define DM646X_LPSC_TPTC2 7
#define DM646X_LPSC_TPTC3 8
#define DM646X_LPSC_PCI 13
#define DM646X_LPSC_EMAC 14
#define DM646X_LPSC_VDCE 15
#define DM646X_LPSC_VPSSMSTR 16
#define DM646X_LPSC_VPSSSLV 17
#define DM646X_LPSC_TSIF0 18
#define DM646X_LPSC_TSIF1 19
#define DM646X_LPSC_DDR_EMIF 20
#define DM646X_LPSC_AEMIF 21
#define DM646X_LPSC_McASP0 22
#define DM646X_LPSC_McASP1 23
#define DM646X_LPSC_CRGEN0 24
#define DM646X_LPSC_CRGEN1 25
#define DM646X_LPSC_UART0 26
#define DM646X_LPSC_UART1 27
#define DM646X_LPSC_UART2 28
#define DM646X_LPSC_PWM0 29
#define DM646X_LPSC_PWM1 30
#define DM646X_LPSC_I2C 31
#define DM646X_LPSC_SPI 32
#define DM646X_LPSC_GPIO 33
#define DM646X_LPSC_TIMER0 34
#define DM646X_LPSC_TIMER1 35
#define DM646X_LPSC_ARM_INTC 45
extern int davinci_psc_is_clk_active(unsigned int id);
extern void davinci_psc_config(unsigned int domain, unsigned int id,
char enable);
#endif /* __ASM_ARCH_PSC_H */

View File

@ -13,8 +13,23 @@
#include <mach/io.h>
#define DAVINCI_UART0_BASE (IO_PHYS + 0x20000)
#define DAVINCI_UART1_BASE (IO_PHYS + 0x20400)
#define DAVINCI_UART2_BASE (IO_PHYS + 0x20800)
#define DAVINCI_MAX_NR_UARTS 3
#define DAVINCI_UART0_BASE (IO_PHYS + 0x20000)
#define DAVINCI_UART1_BASE (IO_PHYS + 0x20400)
#define DAVINCI_UART2_BASE (IO_PHYS + 0x20800)
#define DM355_UART2_BASE (IO_PHYS + 0x206000)
/* DaVinci UART register offsets */
#define UART_DAVINCI_PWREMU 0x0c
#define UART_DM646X_SCR 0x10
#define UART_DM646X_SCR_TX_WATERMARK 0x08
struct davinci_uart_config {
/* Bit field of UARTs present; bit 0 --> UART1 */
unsigned int enabled_uarts;
};
extern void davinci_serial_init(struct davinci_uart_config *);
#endif /* __ASM_ARCH_SERIAL_H */

View File

@ -51,7 +51,26 @@ void __init davinci_map_common_io(void)
davinci_check_revision();
}
void __init davinci_init_common_hw(void)
#define BETWEEN(p, st, sz) ((p) >= (st) && (p) < ((st) + (sz)))
#define XLATE(p, pst, vst) ((void __iomem *)((p) - (pst) + (vst)))
/*
* Intercept ioremap() requests for addresses in our fixed mapping regions.
*/
void __iomem *davinci_ioremap(unsigned long p, size_t size, unsigned int type)
{
davinci_clk_init();
if (BETWEEN(p, IO_PHYS, IO_SIZE))
return XLATE(p, IO_PHYS, IO_VIRT);
return __arm_ioremap(p, size, type);
}
EXPORT_SYMBOL(davinci_ioremap);
void davinci_iounmap(volatile void __iomem *addr)
{
unsigned long virt = (unsigned long)addr;
if (virt >= VMALLOC_START && virt < VMALLOC_END)
__iounmap(addr);
}
EXPORT_SYMBOL(davinci_iounmap);

View File

@ -25,6 +25,7 @@
#include <linux/io.h>
#include <mach/hardware.h>
#include <mach/cputype.h>
#include <asm/mach/irq.h>
#define IRQ_BIT(irq) ((irq) & 0x1f)
@ -40,14 +41,18 @@
#define IRQ_INTPRI0_REG_OFFSET 0x0030
#define IRQ_INTPRI7_REG_OFFSET 0x004C
const u8 *davinci_def_priorities;
#define INTC_BASE IO_ADDRESS(DAVINCI_ARM_INTC_BASE)
static inline unsigned int davinci_irq_readl(int offset)
{
return davinci_readl(DAVINCI_ARM_INTC_BASE + offset);
return __raw_readl(INTC_BASE + offset);
}
static inline void davinci_irq_writel(unsigned long value, int offset)
{
davinci_writel(value, DAVINCI_ARM_INTC_BASE + offset);
__raw_writel(value, INTC_BASE + offset);
}
/* Disable interrupt */
@ -108,9 +113,8 @@ static struct irq_chip davinci_irq_chip_0 = {
.unmask = davinci_unmask_irq,
};
/* FIQ are pri 0-1; otherwise 2-7, with 7 lowest priority */
static const u8 default_priorities[DAVINCI_N_AINTC_IRQ] __initdata = {
static const u8 dm644x_default_priorities[DAVINCI_N_AINTC_IRQ] __initdata = {
[IRQ_VDINT0] = 2,
[IRQ_VDINT1] = 6,
[IRQ_VDINT2] = 6,
@ -177,11 +181,149 @@ static const u8 default_priorities[DAVINCI_N_AINTC_IRQ] __initdata = {
[IRQ_EMUINT] = 7,
};
static const u8 dm646x_default_priorities[DAVINCI_N_AINTC_IRQ] = {
[IRQ_DM646X_VP_VERTINT0] = 7,
[IRQ_DM646X_VP_VERTINT1] = 7,
[IRQ_DM646X_VP_VERTINT2] = 7,
[IRQ_DM646X_VP_VERTINT3] = 7,
[IRQ_DM646X_VP_ERRINT] = 7,
[IRQ_DM646X_RESERVED_1] = 7,
[IRQ_DM646X_RESERVED_2] = 7,
[IRQ_DM646X_WDINT] = 7,
[IRQ_DM646X_CRGENINT0] = 7,
[IRQ_DM646X_CRGENINT1] = 7,
[IRQ_DM646X_TSIFINT0] = 7,
[IRQ_DM646X_TSIFINT1] = 7,
[IRQ_DM646X_VDCEINT] = 7,
[IRQ_DM646X_USBINT] = 7,
[IRQ_DM646X_USBDMAINT] = 7,
[IRQ_DM646X_PCIINT] = 7,
[IRQ_CCINT0] = 7, /* dma */
[IRQ_CCERRINT] = 7, /* dma */
[IRQ_TCERRINT0] = 7, /* dma */
[IRQ_TCERRINT] = 7, /* dma */
[IRQ_DM646X_TCERRINT2] = 7,
[IRQ_DM646X_TCERRINT3] = 7,
[IRQ_DM646X_IDE] = 7,
[IRQ_DM646X_HPIINT] = 7,
[IRQ_DM646X_EMACRXTHINT] = 7,
[IRQ_DM646X_EMACRXINT] = 7,
[IRQ_DM646X_EMACTXINT] = 7,
[IRQ_DM646X_EMACMISCINT] = 7,
[IRQ_DM646X_MCASP0TXINT] = 7,
[IRQ_DM646X_MCASP0RXINT] = 7,
[IRQ_AEMIFINT] = 7,
[IRQ_DM646X_RESERVED_3] = 7,
[IRQ_DM646X_MCASP1TXINT] = 7, /* clockevent */
[IRQ_TINT0_TINT34] = 7, /* clocksource */
[IRQ_TINT1_TINT12] = 7, /* DSP timer */
[IRQ_TINT1_TINT34] = 7, /* system tick */
[IRQ_PWMINT0] = 7,
[IRQ_PWMINT1] = 7,
[IRQ_DM646X_VLQINT] = 7,
[IRQ_I2C] = 7,
[IRQ_UARTINT0] = 7,
[IRQ_UARTINT1] = 7,
[IRQ_DM646X_UARTINT2] = 7,
[IRQ_DM646X_SPINT0] = 7,
[IRQ_DM646X_SPINT1] = 7,
[IRQ_DM646X_DSP2ARMINT] = 7,
[IRQ_DM646X_RESERVED_4] = 7,
[IRQ_DM646X_PSCINT] = 7,
[IRQ_DM646X_GPIO0] = 7,
[IRQ_DM646X_GPIO1] = 7,
[IRQ_DM646X_GPIO2] = 7,
[IRQ_DM646X_GPIO3] = 7,
[IRQ_DM646X_GPIO4] = 7,
[IRQ_DM646X_GPIO5] = 7,
[IRQ_DM646X_GPIO6] = 7,
[IRQ_DM646X_GPIO7] = 7,
[IRQ_DM646X_GPIOBNK0] = 7,
[IRQ_DM646X_GPIOBNK1] = 7,
[IRQ_DM646X_GPIOBNK2] = 7,
[IRQ_DM646X_DDRINT] = 7,
[IRQ_DM646X_AEMIFINT] = 7,
[IRQ_COMMTX] = 7,
[IRQ_COMMRX] = 7,
[IRQ_EMUINT] = 7,
};
static const u8 dm355_default_priorities[DAVINCI_N_AINTC_IRQ] = {
[IRQ_DM355_CCDC_VDINT0] = 2,
[IRQ_DM355_CCDC_VDINT1] = 6,
[IRQ_DM355_CCDC_VDINT2] = 6,
[IRQ_DM355_IPIPE_HST] = 6,
[IRQ_DM355_H3AINT] = 6,
[IRQ_DM355_IPIPE_SDR] = 6,
[IRQ_DM355_IPIPEIFINT] = 6,
[IRQ_DM355_OSDINT] = 7,
[IRQ_DM355_VENCINT] = 6,
[IRQ_ASQINT] = 6,
[IRQ_IMXINT] = 6,
[IRQ_USBINT] = 4,
[IRQ_DM355_RTOINT] = 4,
[IRQ_DM355_UARTINT2] = 7,
[IRQ_DM355_TINT6] = 7,
[IRQ_CCINT0] = 5, /* dma */
[IRQ_CCERRINT] = 5, /* dma */
[IRQ_TCERRINT0] = 5, /* dma */
[IRQ_TCERRINT] = 5, /* dma */
[IRQ_DM355_SPINT2_1] = 7,
[IRQ_DM355_TINT7] = 4,
[IRQ_DM355_SDIOINT0] = 7,
[IRQ_MBXINT] = 7,
[IRQ_MBRINT] = 7,
[IRQ_MMCINT] = 7,
[IRQ_DM355_MMCINT1] = 7,
[IRQ_DM355_PWMINT3] = 7,
[IRQ_DDRINT] = 7,
[IRQ_AEMIFINT] = 7,
[IRQ_DM355_SDIOINT1] = 4,
[IRQ_TINT0_TINT12] = 2, /* clockevent */
[IRQ_TINT0_TINT34] = 2, /* clocksource */
[IRQ_TINT1_TINT12] = 7, /* DSP timer */
[IRQ_TINT1_TINT34] = 7, /* system tick */
[IRQ_PWMINT0] = 7,
[IRQ_PWMINT1] = 7,
[IRQ_PWMINT2] = 7,
[IRQ_I2C] = 3,
[IRQ_UARTINT0] = 3,
[IRQ_UARTINT1] = 3,
[IRQ_DM355_SPINT0_0] = 3,
[IRQ_DM355_SPINT0_1] = 3,
[IRQ_DM355_GPIO0] = 3,
[IRQ_DM355_GPIO1] = 7,
[IRQ_DM355_GPIO2] = 4,
[IRQ_DM355_GPIO3] = 4,
[IRQ_DM355_GPIO4] = 7,
[IRQ_DM355_GPIO5] = 7,
[IRQ_DM355_GPIO6] = 7,
[IRQ_DM355_GPIO7] = 7,
[IRQ_DM355_GPIO8] = 7,
[IRQ_DM355_GPIO9] = 7,
[IRQ_DM355_GPIOBNK0] = 7,
[IRQ_DM355_GPIOBNK1] = 7,
[IRQ_DM355_GPIOBNK2] = 7,
[IRQ_DM355_GPIOBNK3] = 7,
[IRQ_DM355_GPIOBNK4] = 7,
[IRQ_DM355_GPIOBNK5] = 7,
[IRQ_DM355_GPIOBNK6] = 7,
[IRQ_COMMTX] = 7,
[IRQ_COMMRX] = 7,
[IRQ_EMUINT] = 7,
};
/* ARM Interrupt Controller Initialization */
void __init davinci_irq_init(void)
{
unsigned i;
const u8 *priority = default_priorities;
if (cpu_is_davinci_dm644x())
davinci_def_priorities = dm644x_default_priorities;
else if (cpu_is_davinci_dm646x())
davinci_def_priorities = dm646x_default_priorities;
else if (cpu_is_davinci_dm355())
davinci_def_priorities = dm355_default_priorities;
/* Clear all interrupt requests */
davinci_irq_writel(~0x0, FIQ_REG0_OFFSET);
@ -209,8 +351,8 @@ void __init davinci_irq_init(void)
unsigned j;
u32 pri;
for (j = 0, pri = 0; j < 32; j += 4, priority++)
pri |= (*priority & 0x07) << j;
for (j = 0, pri = 0; j < 32; j += 4, davinci_def_priorities++)
pri |= (*davinci_def_priorities & 0x07) << j;
davinci_irq_writel(pri, i);
}

View File

@ -1,41 +1,103 @@
/*
* DaVinci pin multiplexing configurations
* Utility to set the DAVINCI MUX register from a table in mux.h
*
* Author: Vladimir Barinov, MontaVista Software, Inc. <source@mvista.com>
*
* Based on linux/arch/arm/plat-omap/mux.c:
* Copyright (C) 2003 - 2005 Nokia Corporation
*
* Written by Tony Lindgren
*
* 2007 (c) MontaVista Software, Inc. This file is licensed under
* the terms of the GNU General Public License version 2. This program
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
*
* Copyright (C) 2008 Texas Instruments.
*/
#include <linux/io.h>
#include <linux/module.h>
#include <linux/spinlock.h>
#include <mach/hardware.h>
#include <mach/mux.h>
/* System control register offsets */
#define PINMUX0 0x00
#define PINMUX1 0x04
static const struct mux_config *mux_table;
static unsigned long pin_table_sz;
static DEFINE_SPINLOCK(mux_lock);
void davinci_mux_peripheral(unsigned int mux, unsigned int enable)
int __init davinci_mux_register(const struct mux_config *pins,
unsigned long size)
{
u32 pinmux, muxreg = PINMUX0;
mux_table = pins;
pin_table_sz = size;
if (mux >= DAVINCI_MUX_LEVEL2) {
muxreg = PINMUX1;
mux -= DAVINCI_MUX_LEVEL2;
return 0;
}
/*
* Sets the DAVINCI MUX register based on the table
*/
int __init_or_module davinci_cfg_reg(const unsigned long index)
{
static DEFINE_SPINLOCK(mux_spin_lock);
void __iomem *base = IO_ADDRESS(DAVINCI_SYSTEM_MODULE_BASE);
unsigned long flags;
const struct mux_config *cfg;
unsigned int reg_orig = 0, reg = 0;
unsigned int mask, warn = 0;
if (!mux_table)
BUG();
if (index >= pin_table_sz) {
printk(KERN_ERR "Invalid pin mux index: %lu (%lu)\n",
index, pin_table_sz);
dump_stack();
return -ENODEV;
}
spin_lock(&mux_lock);
pinmux = davinci_readl(DAVINCI_SYSTEM_MODULE_BASE + muxreg);
if (enable)
pinmux |= (1 << mux);
else
pinmux &= ~(1 << mux);
davinci_writel(pinmux, DAVINCI_SYSTEM_MODULE_BASE + muxreg);
spin_unlock(&mux_lock);
cfg = &mux_table[index];
if (cfg->name == NULL) {
printk(KERN_ERR "No entry for the specified index\n");
return -ENODEV;
}
/* Update the mux register in question */
if (cfg->mask) {
unsigned tmp1, tmp2;
spin_lock_irqsave(&mux_spin_lock, flags);
reg_orig = __raw_readl(base + cfg->mux_reg);
mask = (cfg->mask << cfg->mask_offset);
tmp1 = reg_orig & mask;
reg = reg_orig & ~mask;
tmp2 = (cfg->mode << cfg->mask_offset);
reg |= tmp2;
if (tmp1 != tmp2)
warn = 1;
__raw_writel(reg, base + cfg->mux_reg);
spin_unlock_irqrestore(&mux_spin_lock, flags);
}
if (warn) {
#ifdef CONFIG_DAVINCI_MUX_WARNINGS
printk(KERN_WARNING "MUX: initialized %s\n", cfg->name);
#endif
}
#ifdef CONFIG_DAVINCI_MUX_DEBUG
if (cfg->debug || warn) {
printk(KERN_WARNING "MUX: Setting register %s\n", cfg->name);
printk(KERN_WARNING " %s (0x%08x) = 0x%08x -> 0x%08x\n",
cfg->mux_reg_name, cfg->mux_reg, reg_orig, reg);
}
#endif
return 0;
}
EXPORT_SYMBOL(davinci_cfg_reg);

View File

@ -0,0 +1,51 @@
/*
* Pin-multiplex helper macros for TI DaVinci family devices
*
* Author: Vladimir Barinov, MontaVista Software, Inc. <source@mvista.com>
*
* 2007 (c) MontaVista Software, Inc. This file is licensed under
* the terms of the GNU General Public License version 2. This program
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
*
* Copyright (C) 2008 Texas Instruments.
*/
#ifndef _MACH_DAVINCI_MUX_H_
#define _MACH_DAVINCI_MUX_H_
#include <mach/mux.h>
#define MUX_CFG(soc, desc, muxreg, mode_offset, mode_mask, mux_mode, dbg)\
[soc##_##desc] = { \
.name = #desc, \
.debug = dbg, \
.mux_reg_name = "PINMUX"#muxreg, \
.mux_reg = PINMUX##muxreg, \
.mask_offset = mode_offset, \
.mask = mode_mask, \
.mode = mux_mode, \
},
#define INT_CFG(soc, desc, mode_offset, mode_mask, mux_mode, dbg) \
[soc##_##desc] = { \
.name = #desc, \
.debug = dbg, \
.mux_reg_name = "INTMUX", \
.mux_reg = INTMUX, \
.mask_offset = mode_offset, \
.mask = mode_mask, \
.mode = mux_mode, \
},
#define EVT_CFG(soc, desc, mode_offset, mode_mask, mux_mode, dbg) \
[soc##_##desc] = { \
.name = #desc, \
.debug = dbg, \
.mux_reg_name = "EVTMUX", \
.mux_reg = EVTMUX, \
.mask_offset = mode_offset, \
.mask = mode_mask, \
.mode = mux_mode, \
},
#endif /* _MACH_DAVINCI_MUX_H */

View File

@ -23,10 +23,13 @@
#include <linux/init.h>
#include <linux/io.h>
#include <mach/cputype.h>
#include <mach/hardware.h>
#include <mach/psc.h>
#include <mach/mux.h>
#define DAVINCI_PWR_SLEEP_CNTRL_BASE 0x01C41000
/* PSC register offsets */
#define EPCPR 0x070
#define PTCMD 0x120
@ -36,102 +39,61 @@
#define MDSTAT 0x800
#define MDCTL 0xA00
/* System control register offsets */
#define VDD3P3V_PWDN 0x48
#define MDSTAT_STATE_MASK 0x1f
static void davinci_psc_mux(unsigned int id)
/* Return nonzero iff the domain's clock is active */
int __init davinci_psc_is_clk_active(unsigned int id)
{
switch (id) {
case DAVINCI_LPSC_ATA:
davinci_mux_peripheral(DAVINCI_MUX_HDIREN, 1);
davinci_mux_peripheral(DAVINCI_MUX_ATAEN, 1);
break;
case DAVINCI_LPSC_MMC_SD:
/* VDD power manupulations are done in U-Boot for CPMAC
* so applies to MMC as well
*/
/*Set up the pull regiter for MMC */
davinci_writel(0, DAVINCI_SYSTEM_MODULE_BASE + VDD3P3V_PWDN);
davinci_mux_peripheral(DAVINCI_MUX_MSTK, 0);
break;
case DAVINCI_LPSC_I2C:
davinci_mux_peripheral(DAVINCI_MUX_I2C, 1);
break;
case DAVINCI_LPSC_McBSP:
davinci_mux_peripheral(DAVINCI_MUX_ASP, 1);
break;
default:
break;
}
void __iomem *psc_base = IO_ADDRESS(DAVINCI_PWR_SLEEP_CNTRL_BASE);
u32 mdstat = __raw_readl(psc_base + MDSTAT + 4 * id);
/* if clocked, state can be "Enable" or "SyncReset" */
return mdstat & BIT(12);
}
/* Enable or disable a PSC domain */
void davinci_psc_config(unsigned int domain, unsigned int id, char enable)
{
u32 epcpr, ptcmd, ptstat, pdstat, pdctl1, mdstat, mdctl, mdstat_mask;
u32 epcpr, ptcmd, ptstat, pdstat, pdctl1, mdstat, mdctl;
void __iomem *psc_base = IO_ADDRESS(DAVINCI_PWR_SLEEP_CNTRL_BASE);
u32 next_state = enable ? 0x3 : 0x2; /* 0x3 enables, 0x2 disables */
mdctl = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE + MDCTL + 4 * id);
if (enable)
mdctl |= 0x00000003; /* Enable Module */
else
mdctl &= 0xFFFFFFF2; /* Disable Module */
davinci_writel(mdctl, DAVINCI_PWR_SLEEP_CNTRL_BASE + MDCTL + 4 * id);
mdctl = __raw_readl(psc_base + MDCTL + 4 * id);
mdctl &= ~MDSTAT_STATE_MASK;
mdctl |= next_state;
__raw_writel(mdctl, psc_base + MDCTL + 4 * id);
pdstat = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE + PDSTAT);
pdstat = __raw_readl(psc_base + PDSTAT);
if ((pdstat & 0x00000001) == 0) {
pdctl1 = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE + PDCTL1);
pdctl1 = __raw_readl(psc_base + PDCTL1);
pdctl1 |= 0x1;
davinci_writel(pdctl1, DAVINCI_PWR_SLEEP_CNTRL_BASE + PDCTL1);
__raw_writel(pdctl1, psc_base + PDCTL1);
ptcmd = 1 << domain;
davinci_writel(ptcmd, DAVINCI_PWR_SLEEP_CNTRL_BASE + PTCMD);
__raw_writel(ptcmd, psc_base + PTCMD);
do {
epcpr = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE +
EPCPR);
epcpr = __raw_readl(psc_base + EPCPR);
} while ((((epcpr >> domain) & 1) == 0));
pdctl1 = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE + PDCTL1);
pdctl1 = __raw_readl(psc_base + PDCTL1);
pdctl1 |= 0x100;
davinci_writel(pdctl1, DAVINCI_PWR_SLEEP_CNTRL_BASE + PDCTL1);
__raw_writel(pdctl1, psc_base + PDCTL1);
do {
ptstat = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE +
ptstat = __raw_readl(psc_base +
PTSTAT);
} while (!(((ptstat >> domain) & 1) == 0));
} else {
ptcmd = 1 << domain;
davinci_writel(ptcmd, DAVINCI_PWR_SLEEP_CNTRL_BASE + PTCMD);
__raw_writel(ptcmd, psc_base + PTCMD);
do {
ptstat = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE +
PTSTAT);
ptstat = __raw_readl(psc_base + PTSTAT);
} while (!(((ptstat >> domain) & 1) == 0));
}
if (enable)
mdstat_mask = 0x3;
else
mdstat_mask = 0x2;
do {
mdstat = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE +
MDSTAT + 4 * id);
} while (!((mdstat & 0x0000001F) == mdstat_mask));
if (enable)
davinci_psc_mux(id);
}
void __init davinci_psc_init(void)
{
davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, DAVINCI_LPSC_VPSSMSTR, 1);
davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, DAVINCI_LPSC_VPSSSLV, 1);
davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, DAVINCI_LPSC_TPCC, 1);
davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, DAVINCI_LPSC_TPTC0, 1);
davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, DAVINCI_LPSC_TPTC1, 1);
davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, DAVINCI_LPSC_GPIO, 1);
/* Turn on WatchDog timer LPSC. Needed for RESET to work */
davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, DAVINCI_LPSC_TIMER2, 1);
mdstat = __raw_readl(psc_base + MDSTAT + 4 * id);
} while (!((mdstat & MDSTAT_STATE_MASK) == next_state));
}

View File

@ -32,32 +32,47 @@
#include <mach/hardware.h>
#include <mach/serial.h>
#include <mach/irqs.h>
#include <mach/cputype.h>
#include "clock.h"
#define UART_DAVINCI_PWREMU 0x0c
static inline unsigned int davinci_serial_in(struct plat_serial8250_port *up,
int offset)
static inline unsigned int serial_read_reg(struct plat_serial8250_port *up,
int offset)
{
offset <<= up->regshift;
return (unsigned int)__raw_readb(up->membase + offset);
return (unsigned int)__raw_readl(IO_ADDRESS(up->mapbase) + offset);
}
static inline void davinci_serial_outp(struct plat_serial8250_port *p,
int offset, int value)
static inline void serial_write_reg(struct plat_serial8250_port *p, int offset,
int value)
{
offset <<= p->regshift;
__raw_writeb(value, p->membase + offset);
__raw_writel(value, IO_ADDRESS(p->mapbase) + offset);
}
static struct plat_serial8250_port serial_platform_data[] = {
{
.membase = (char *)IO_ADDRESS(DAVINCI_UART0_BASE),
.mapbase = (unsigned long)DAVINCI_UART0_BASE,
.mapbase = DAVINCI_UART0_BASE,
.irq = IRQ_UARTINT0,
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
UPF_IOREMAP,
.iotype = UPIO_MEM,
.regshift = 2,
},
{
.mapbase = DAVINCI_UART1_BASE,
.irq = IRQ_UARTINT1,
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
UPF_IOREMAP,
.iotype = UPIO_MEM,
.regshift = 2,
},
{
.mapbase = DAVINCI_UART2_BASE,
.irq = IRQ_UARTINT2,
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
UPF_IOREMAP,
.iotype = UPIO_MEM,
.regshift = 2,
.uartclk = 27000000,
},
{
.flags = 0
@ -74,22 +89,68 @@ static struct platform_device serial_device = {
static void __init davinci_serial_reset(struct plat_serial8250_port *p)
{
/* reset both transmitter and receiver: bits 14,13 = UTRST, URRST */
unsigned int pwremu = 0;
davinci_serial_outp(p, UART_IER, 0); /* disable all interrupts */
serial_write_reg(p, UART_IER, 0); /* disable all interrupts */
davinci_serial_outp(p, UART_DAVINCI_PWREMU, pwremu);
/* reset both transmitter and receiver: bits 14,13 = UTRST, URRST */
serial_write_reg(p, UART_DAVINCI_PWREMU, pwremu);
mdelay(10);
pwremu |= (0x3 << 13);
pwremu |= 0x1;
davinci_serial_outp(p, UART_DAVINCI_PWREMU, pwremu);
serial_write_reg(p, UART_DAVINCI_PWREMU, pwremu);
if (cpu_is_davinci_dm646x())
serial_write_reg(p, UART_DM646X_SCR,
UART_DM646X_SCR_TX_WATERMARK);
}
void __init davinci_serial_init(struct davinci_uart_config *info)
{
int i;
char name[16];
struct clk *uart_clk;
struct device *dev = &serial_device.dev;
/*
* Make sure the serial ports are muxed on at this point.
* You have to mux them off in device drivers later on
* if not needed.
*/
for (i = 0; i < DAVINCI_MAX_NR_UARTS; i++) {
struct plat_serial8250_port *p = serial_platform_data + i;
if (!(info->enabled_uarts & (1 << i))) {
p->flags = 0;
continue;
}
if (cpu_is_davinci_dm646x())
p->iotype = UPIO_MEM32;
if (cpu_is_davinci_dm355()) {
if (i == 2) {
p->mapbase = (unsigned long)DM355_UART2_BASE;
p->irq = IRQ_DM355_UARTINT2;
}
}
sprintf(name, "uart%d", i);
uart_clk = clk_get(dev, name);
if (IS_ERR(uart_clk))
printk(KERN_ERR "%s:%d: failed to get UART%d clock\n",
__func__, __LINE__, i);
else {
clk_enable(uart_clk);
p->uartclk = clk_get_rate(uart_clk);
davinci_serial_reset(p);
}
}
}
static int __init davinci_init(void)
{
davinci_serial_reset(&serial_platform_data[0]);
return platform_device_register(&serial_device);
}

View File

@ -16,6 +16,9 @@
#include <linux/clockchips.h>
#include <linux/spinlock.h>
#include <linux/io.h>
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/device.h>
#include <mach/hardware.h>
#include <asm/system.h>
@ -24,8 +27,11 @@
#include <asm/mach/time.h>
#include <asm/errno.h>
#include <mach/io.h>
#include <mach/cputype.h>
#include "clock.h"
static struct clock_event_device clockevent_davinci;
static unsigned int davinci_clock_tick_rate;
#define DAVINCI_TIMER0_BASE (IO_PHYS + 0x21400)
#define DAVINCI_TIMER1_BASE (IO_PHYS + 0x21800)
@ -99,9 +105,9 @@ struct timer_s {
unsigned int id;
unsigned long period;
unsigned long opts;
unsigned long reg_base;
unsigned long tim_reg;
unsigned long prd_reg;
void __iomem *base;
unsigned long tim_off;
unsigned long prd_off;
unsigned long enamode_shift;
struct irqaction irqaction;
};
@ -114,15 +120,15 @@ static struct timer_s timers[];
static int timer32_config(struct timer_s *t)
{
u32 tcr = davinci_readl(t->reg_base + TCR);
u32 tcr = __raw_readl(t->base + TCR);
/* disable timer */
tcr &= ~(TCR_ENAMODE_MASK << t->enamode_shift);
davinci_writel(tcr, t->reg_base + TCR);
__raw_writel(tcr, t->base + TCR);
/* reset counter to zero, set new period */
davinci_writel(0, t->tim_reg);
davinci_writel(t->period, t->prd_reg);
__raw_writel(0, t->base + t->tim_off);
__raw_writel(t->period, t->base + t->prd_off);
/* Set enable mode */
if (t->opts & TIMER_OPTS_ONESHOT) {
@ -131,13 +137,13 @@ static int timer32_config(struct timer_s *t)
tcr |= TCR_ENAMODE_PERIODIC << t->enamode_shift;
}
davinci_writel(tcr, t->reg_base + TCR);
__raw_writel(tcr, t->base + TCR);
return 0;
}
static inline u32 timer32_read(struct timer_s *t)
{
return davinci_readl(t->tim_reg);
return __raw_readl(t->base + t->tim_off);
}
static irqreturn_t timer_interrupt(int irq, void *dev_id)
@ -176,51 +182,54 @@ static struct timer_s timers[] = {
static void __init timer_init(void)
{
u32 bases[] = {DAVINCI_TIMER0_BASE, DAVINCI_TIMER1_BASE};
u32 phys_bases[] = {DAVINCI_TIMER0_BASE, DAVINCI_TIMER1_BASE};
int i;
/* Global init of each 64-bit timer as a whole */
for(i=0; i<2; i++) {
u32 tgcr, base = bases[i];
u32 tgcr;
void __iomem *base = IO_ADDRESS(phys_bases[i]);
/* Disabled, Internal clock source */
davinci_writel(0, base + TCR);
__raw_writel(0, base + TCR);
/* reset both timers, no pre-scaler for timer34 */
tgcr = 0;
davinci_writel(tgcr, base + TGCR);
__raw_writel(tgcr, base + TGCR);
/* Set both timers to unchained 32-bit */
tgcr = TGCR_TIMMODE_32BIT_UNCHAINED << TGCR_TIMMODE_SHIFT;
davinci_writel(tgcr, base + TGCR);
__raw_writel(tgcr, base + TGCR);
/* Unreset timers */
tgcr |= (TGCR_UNRESET << TGCR_TIM12RS_SHIFT) |
(TGCR_UNRESET << TGCR_TIM34RS_SHIFT);
davinci_writel(tgcr, base + TGCR);
__raw_writel(tgcr, base + TGCR);
/* Init both counters to zero */
davinci_writel(0, base + TIM12);
davinci_writel(0, base + TIM34);
__raw_writel(0, base + TIM12);
__raw_writel(0, base + TIM34);
}
/* Init of each timer as a 32-bit timer */
for (i=0; i< ARRAY_SIZE(timers); i++) {
struct timer_s *t = &timers[i];
u32 phys_base;
if (t->name) {
t->id = i;
t->reg_base = (IS_TIMER1(t->id) ?
phys_base = (IS_TIMER1(t->id) ?
DAVINCI_TIMER1_BASE : DAVINCI_TIMER0_BASE);
t->base = IO_ADDRESS(phys_base);
if (IS_TIMER_BOT(t->id)) {
t->enamode_shift = 6;
t->tim_reg = t->reg_base + TIM12;
t->prd_reg = t->reg_base + PRD12;
t->tim_off = TIM12;
t->prd_off = PRD12;
} else {
t->enamode_shift = 22;
t->tim_reg = t->reg_base + TIM34;
t->prd_reg = t->reg_base + PRD34;
t->tim_off = TIM34;
t->prd_off = PRD34;
}
/* Register interrupt */
@ -238,7 +247,7 @@ static void __init timer_init(void)
/*
* clocksource
*/
static cycle_t read_cycles(void)
static cycle_t read_cycles(struct clocksource *cs)
{
struct timer_s *t = &timers[TID_CLOCKSOURCE];
@ -274,7 +283,7 @@ static void davinci_set_mode(enum clock_event_mode mode,
switch (mode) {
case CLOCK_EVT_MODE_PERIODIC:
t->period = CLOCK_TICK_RATE / (HZ);
t->period = davinci_clock_tick_rate / (HZ);
t->opts = TIMER_OPTS_PERIODIC;
timer32_config(t);
break;
@ -301,21 +310,29 @@ static struct clock_event_device clockevent_davinci = {
static void __init davinci_timer_init(void)
{
struct clk *timer_clk;
static char err[] __initdata = KERN_ERR
"%s: can't register clocksource!\n";
/* init timer hw */
timer_init();
timer_clk = clk_get(NULL, "timer0");
BUG_ON(IS_ERR(timer_clk));
clk_enable(timer_clk);
davinci_clock_tick_rate = clk_get_rate(timer_clk);
/* setup clocksource */
clocksource_davinci.mult =
clocksource_khz2mult(CLOCK_TICK_RATE/1000,
clocksource_khz2mult(davinci_clock_tick_rate/1000,
clocksource_davinci.shift);
if (clocksource_register(&clocksource_davinci))
printk(err, clocksource_davinci.name);
/* setup clockevent */
clockevent_davinci.mult = div_sc(CLOCK_TICK_RATE, NSEC_PER_SEC,
clockevent_davinci.mult = div_sc(davinci_clock_tick_rate, NSEC_PER_SEC,
clockevent_davinci.shift);
clockevent_davinci.max_delta_ns =
clockevent_delta2ns(0xfffffffe, &clockevent_davinci);
@ -333,42 +350,52 @@ struct sys_timer davinci_timer = {
/* reset board using watchdog timer */
void davinci_watchdog_reset(void) {
u32 tgcr, wdtcr, base = DAVINCI_WDOG_BASE;
u32 tgcr, wdtcr;
void __iomem *base = IO_ADDRESS(DAVINCI_WDOG_BASE);
struct device dev;
struct clk *wd_clk;
char *name = "watchdog";
dev_set_name(&dev, name);
wd_clk = clk_get(&dev, NULL);
if (WARN_ON(IS_ERR(wd_clk)))
return;
clk_enable(wd_clk);
/* disable, internal clock source */
davinci_writel(0, base + TCR);
__raw_writel(0, base + TCR);
/* reset timer, set mode to 64-bit watchdog, and unreset */
tgcr = 0;
davinci_writel(tgcr, base + TCR);
__raw_writel(tgcr, base + TCR);
tgcr = TGCR_TIMMODE_64BIT_WDOG << TGCR_TIMMODE_SHIFT;
tgcr |= (TGCR_UNRESET << TGCR_TIM12RS_SHIFT) |
(TGCR_UNRESET << TGCR_TIM34RS_SHIFT);
davinci_writel(tgcr, base + TCR);
__raw_writel(tgcr, base + TCR);
/* clear counter and period regs */
davinci_writel(0, base + TIM12);
davinci_writel(0, base + TIM34);
davinci_writel(0, base + PRD12);
davinci_writel(0, base + PRD34);
__raw_writel(0, base + TIM12);
__raw_writel(0, base + TIM34);
__raw_writel(0, base + PRD12);
__raw_writel(0, base + PRD34);
/* enable */
wdtcr = davinci_readl(base + WDTCR);
wdtcr = __raw_readl(base + WDTCR);
wdtcr |= WDTCR_WDEN_ENABLE << WDTCR_WDEN_SHIFT;
davinci_writel(wdtcr, base + WDTCR);
__raw_writel(wdtcr, base + WDTCR);
/* put watchdog in pre-active state */
wdtcr = (WDTCR_WDKEY_SEQ0 << WDTCR_WDKEY_SHIFT) |
(WDTCR_WDEN_ENABLE << WDTCR_WDEN_SHIFT);
davinci_writel(wdtcr, base + WDTCR);
__raw_writel(wdtcr, base + WDTCR);
/* put watchdog in active state */
wdtcr = (WDTCR_WDKEY_SEQ1 << WDTCR_WDKEY_SHIFT) |
(WDTCR_WDEN_ENABLE << WDTCR_WDEN_SHIFT);
davinci_writel(wdtcr, base + WDTCR);
__raw_writel(wdtcr, base + WDTCR);
/* write an invalid value to the WDKEY field to trigger
* a watchdog reset */
wdtcr = 0x00004000;
davinci_writel(wdtcr, base + WDTCR);
__raw_writel(wdtcr, base + WDTCR);
}

View File

@ -14,6 +14,8 @@
#include <mach/hardware.h>
#include <mach/irqs.h>
#define DAVINCI_USB_OTG_BASE 0x01C64000
#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
static struct musb_hdrc_eps_bits musb_eps[] = {
{ "ep1_tx", 8, },

View File

@ -1,6 +1,7 @@
#ifndef _IMX_GPIO_H
#include <linux/kernel.h>
#include <mach/hardware.h>
#include <mach/imx-regs.h>
#define IMX_GPIO_ALLOC_MODE_NORMAL 0

View File

@ -73,7 +73,7 @@ static void __init imx_timer_hardware_init(void)
IMX_TCTL(TIMER_BASE) = TCTL_FRR | TCTL_CLK_PCLK1 | TCTL_TEN;
}
cycle_t imx_get_cycles(void)
cycle_t imx_get_cycles(struct clocksource *cs)
{
return IMX_TCN(TIMER_BASE);
}

View File

@ -401,7 +401,7 @@ void __init ixp4xx_sys_init(void)
/*
* clocksource
*/
cycle_t ixp4xx_get_cycles(void)
cycle_t ixp4xx_get_cycles(struct clocksource *cs)
{
return *IXP4XX_OSTS;
}

View File

@ -23,6 +23,7 @@
#include <asm/mach/map.h>
#include <asm/mach/time.h>
#include <mach/kirkwood.h>
#include <mach/bridge-regs.h>
#include <plat/cache-feroceon-l2.h>
#include <plat/ehci-orion.h>
#include <plat/mvsdio.h>

View File

@ -0,0 +1,42 @@
/*
* arch/arm/mach-kirkwood/include/mach/bridge-regs.h
*
* Mbus-L to Mbus Bridge Registers
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#ifndef __ASM_ARCH_BRIDGE_REGS_H
#define __ASM_ARCH_BRIDGE_REGS_H
#include <mach/kirkwood.h>
#define CPU_CONTROL (BRIDGE_VIRT_BASE | 0x0104)
#define CPU_RESET 0x00000002
#define RSTOUTn_MASK (BRIDGE_VIRT_BASE | 0x0108)
#define SOFT_RESET_OUT_EN 0x00000004
#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE | 0x010c)
#define SOFT_RESET 0x00000001
#define BRIDGE_CAUSE (BRIDGE_VIRT_BASE | 0x0110)
#define BRIDGE_MASK (BRIDGE_VIRT_BASE | 0x0114)
#define BRIDGE_INT_TIMER0 0x0002
#define BRIDGE_INT_TIMER1 0x0004
#define BRIDGE_INT_TIMER1_CLR (~0x0004)
#define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0200)
#define IRQ_CAUSE_LOW_OFF 0x0000
#define IRQ_MASK_LOW_OFF 0x0004
#define IRQ_CAUSE_HIGH_OFF 0x0010
#define IRQ_MASK_HIGH_OFF 0x0014
#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300)
#define L2_CONFIG_REG (BRIDGE_VIRT_BASE | 0x0128)
#define L2_WRITETHROUGH 0x00000010
#endif

View File

@ -6,7 +6,7 @@
* published by the Free Software Foundation.
*/
#include <mach/kirkwood.h>
#include <mach/bridge-regs.h>
.macro addruart,rx
mrc p15, 0, \rx, c1, c0

View File

@ -8,7 +8,7 @@
* warranty of any kind, whether express or implied.
*/
#include <mach/kirkwood.h>
#include <mach/bridge-regs.h>
.macro disable_fiq
.endm

View File

@ -43,44 +43,6 @@
#define KIRKWOOD_PCIE_MEM_PHYS_BASE 0xe0000000
#define KIRKWOOD_PCIE_MEM_SIZE SZ_128M
/*
* MBUS bridge registers.
*/
#define BRIDGE_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x20000)
#define CPU_CONTROL (BRIDGE_VIRT_BASE | 0x0104)
#define CPU_RESET 0x00000002
#define RSTOUTn_MASK (BRIDGE_VIRT_BASE | 0x0108)
#define SOFT_RESET_OUT_EN 0x00000004
#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE | 0x010c)
#define SOFT_RESET 0x00000001
#define BRIDGE_CAUSE (BRIDGE_VIRT_BASE | 0x0110)
#define BRIDGE_MASK (BRIDGE_VIRT_BASE | 0x0114)
#define BRIDGE_INT_TIMER0 0x0002
#define BRIDGE_INT_TIMER1 0x0004
#define BRIDGE_INT_TIMER1_CLR (~0x0004)
#define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0200)
#define IRQ_CAUSE_LOW_OFF 0x0000
#define IRQ_MASK_LOW_OFF 0x0004
#define IRQ_CAUSE_HIGH_OFF 0x0010
#define IRQ_MASK_HIGH_OFF 0x0014
#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300)
#define L2_CONFIG_REG (BRIDGE_VIRT_BASE | 0x0128)
#define L2_WRITETHROUGH 0x00000010
/*
* Supported devices and revisions.
*/
#define MV88F6281_DEV_ID 0x6281
#define MV88F6281_REV_Z0 0
#define MV88F6281_REV_A0 2
#define MV88F6192_DEV_ID 0x6192
#define MV88F6192_REV_Z0 0
#define MV88F6192_REV_A0 2
#define MV88F6180_DEV_ID 0x6180
#define MV88F6180_REV_A0 2
/*
* Register Map
*/
@ -99,6 +61,8 @@
#define UART1_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x2100)
#define UART1_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x2100)
#define BRIDGE_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x20000)
#define PCIE_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x40000)
#define USB_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x50000)
@ -119,5 +83,18 @@
#define SDIO_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x90000)
/*
* Supported devices and revisions.
*/
#define MV88F6281_DEV_ID 0x6281
#define MV88F6281_REV_Z0 0
#define MV88F6281_REV_A0 2
#define MV88F6192_DEV_ID 0x6192
#define MV88F6192_REV_Z0 0
#define MV88F6192_REV_A0 2
#define MV88F6180_DEV_ID 0x6180
#define MV88F6180_REV_A0 2
#endif

View File

@ -9,8 +9,7 @@
#ifndef __ASM_ARCH_SYSTEM_H
#define __ASM_ARCH_SYSTEM_H
#include <mach/hardware.h>
#include <mach/kirkwood.h>
#include <mach/bridge-regs.h>
static inline void arch_idle(void)
{

View File

@ -12,6 +12,7 @@
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/io.h>
#include <mach/bridge-regs.h>
#include <plat/irq.h>
#include <asm/gpio.h>
#include "common.h"

View File

@ -38,6 +38,7 @@
/*
* CPU Address Decode Windows registers
*/
#define BRIDGE_REG(x) (BRIDGE_VIRT_BASE | (x))
#define CPU_WIN_CTRL(n) BRIDGE_REG(0x000 | ((n) << 4))
#define CPU_WIN_BASE(n) BRIDGE_REG(0x004 | ((n) << 4))
#define CPU_WIN_REMAP_LO(n) BRIDGE_REG(0x008 | ((n) << 4))

View File

@ -0,0 +1,33 @@
/*
* arch/arm/mach-loki/include/mach/bridge-regs.h
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#ifndef __ASM_ARCH_BRIDGE_REGS_H
#define __ASM_ARCH_BRIDGE_REGS_H
#include <mach/loki.h>
#define RSTOUTn_MASK (BRIDGE_VIRT_BASE | 0x0108)
#define SOFT_RESET_OUT_EN 0x00000004
#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE | 0x010c)
#define SOFT_RESET 0x00000001
#define BRIDGE_CAUSE (BRIDGE_VIRT_BASE | 0x0110)
#define BRIDGE_MASK (BRIDGE_VIRT_BASE | 0x0114)
#define BRIDGE_INT_TIMER0 0x0002
#define BRIDGE_INT_TIMER1 0x0004
#define BRIDGE_INT_TIMER1_CLR 0x0004
#define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0200)
#define IRQ_CAUSE_OFF 0x0000
#define IRQ_MASK_OFF 0x0004
#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300)
#endif

View File

@ -8,7 +8,7 @@
* warranty of any kind, whether express or implied.
*/
#include <mach/loki.h>
#include <mach/bridge-regs.h>
.macro disable_fiq
.endm

View File

@ -58,20 +58,6 @@
#define UART1_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x2100)
#define BRIDGE_VIRT_BASE (LOKI_REGS_VIRT_BASE | 0x20000)
#define BRIDGE_REG(x) (BRIDGE_VIRT_BASE | (x))
#define RSTOUTn_MASK (BRIDGE_VIRT_BASE | 0x0108)
#define SOFT_RESET_OUT_EN 0x00000004
#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE | 0x010c)
#define SOFT_RESET 0x00000001
#define BRIDGE_CAUSE (BRIDGE_VIRT_BASE | 0x0110)
#define BRIDGE_MASK (BRIDGE_VIRT_BASE | 0x0114)
#define BRIDGE_INT_TIMER0 0x0002
#define BRIDGE_INT_TIMER1 0x0004
#define BRIDGE_INT_TIMER1_CLR 0x0004
#define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0200)
#define IRQ_CAUSE_OFF 0x0000
#define IRQ_MASK_OFF 0x0004
#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300)
#define PCIE0_VIRT_BASE (LOKI_REGS_VIRT_BASE | 0x30000)

View File

@ -9,8 +9,7 @@
#ifndef __ASM_ARCH_SYSTEM_H
#define __ASM_ARCH_SYSTEM_H
#include <mach/hardware.h>
#include <mach/loki.h>
#include <mach/bridge-regs.h>
static inline void arch_idle(void)
{

View File

@ -12,6 +12,7 @@
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/io.h>
#include <mach/bridge-regs.h>
#include <plat/irq.h>
#include "common.h"

Some files were not shown because too many files have changed in this diff Show More