diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index a620023169bc..4dada6ee1119 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -72,4 +72,12 @@ config REGULATOR_WM8400 This driver provides support for the voltage regulators of the WM8400 AudioPlus PMIC. +config REGULATOR_DA903X + tristate "Support regulators on Dialog Semiconductor DA9030/DA9034 PMIC" + depends on PMIC_DA903X + select REGULATOR + help + Say y here to support the BUCKs and LDOs regulators found on + Dialog Semiconductor DA9030/DA9034 PMIC. + endmenu diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index 0de39fe2eaea..254d40c02ee8 100644 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile @@ -10,5 +10,6 @@ obj-$(CONFIG_REGULATOR_VIRTUAL_CONSUMER) += virtual.o obj-$(CONFIG_REGULATOR_BQ24022) += bq24022.o obj-$(CONFIG_REGULATOR_WM8350) += wm8350-regulator.o obj-$(CONFIG_REGULATOR_WM8400) += wm8400-regulator.o +obj-$(CONFIG_REGULATOR_DA903X) += da903x.o ccflags-$(CONFIG_REGULATOR_DEBUG) += -DDEBUG diff --git a/drivers/regulator/da903x.c b/drivers/regulator/da903x.c new file mode 100644 index 000000000000..3688e339db87 --- /dev/null +++ b/drivers/regulator/da903x.c @@ -0,0 +1,513 @@ +/* + * Regulators driver for Dialog Semiconductor DA903x + * + * Copyright (C) 2006-2008 Marvell International Ltd. + * Copyright (C) 2008 Compulab Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include + +/* DA9030 Registers */ +#define DA9030_INVAL (-1) +#define DA9030_LDO1011 (0x10) +#define DA9030_LDO15 (0x11) +#define DA9030_LDO1416 (0x12) +#define DA9030_LDO1819 (0x13) +#define DA9030_LDO17 (0x14) +#define DA9030_BUCK2DVM1 (0x15) +#define DA9030_BUCK2DVM2 (0x16) +#define DA9030_RCTL11 (0x17) +#define DA9030_RCTL21 (0x18) +#define DA9030_LDO1 (0x90) +#define DA9030_LDO23 (0x91) +#define DA9030_LDO45 (0x92) +#define DA9030_LDO6 (0x93) +#define DA9030_LDO78 (0x94) +#define DA9030_LDO912 (0x95) +#define DA9030_BUCK (0x96) +#define DA9030_RCTL12 (0x97) +#define DA9030_RCTL22 (0x98) +#define DA9030_LDO_UNLOCK (0xa0) +#define DA9030_LDO_UNLOCK_MASK (0xe0) +#define DA9034_OVER1 (0x10) + +/* DA9034 Registers */ +#define DA9034_INVAL (-1) +#define DA9034_OVER2 (0x11) +#define DA9034_OVER3 (0x12) +#define DA9034_LDO643 (0x13) +#define DA9034_LDO987 (0x14) +#define DA9034_LDO1110 (0x15) +#define DA9034_LDO1312 (0x16) +#define DA9034_LDO1514 (0x17) +#define DA9034_VCC1 (0x20) +#define DA9034_ADTV1 (0x23) +#define DA9034_ADTV2 (0x24) +#define DA9034_AVRC (0x25) +#define DA9034_CDTV1 (0x26) +#define DA9034_CDTV2 (0x27) +#define DA9034_CVRC (0x28) +#define DA9034_SDTV1 (0x29) +#define DA9034_SDTV2 (0x2a) +#define DA9034_SVRC (0x2b) +#define DA9034_MDTV1 (0x32) +#define DA9034_MDTV2 (0x33) +#define DA9034_MVRC (0x34) + +struct da903x_regulator_info { + struct regulator_desc desc; + + int min_uV; + int max_uV; + int step_uV; + int vol_reg; + int vol_shift; + int vol_nbits; + int update_reg; + int update_bit; + int enable_reg; + int enable_bit; +}; + +static inline int check_range(struct da903x_regulator_info *info, + int min_uV, int max_uV) +{ + if (min_uV < info->min_uV || min_uV > info->max_uV) + return -EINVAL; + + return 0; +} + +/* DA9030/DA9034 common operations */ +static int da903x_set_ldo_voltage(struct regulator_dev *rdev, + int min_uV, int max_uV) +{ + struct da903x_regulator_info *info = rdev_get_drvdata(rdev); + struct device *da9034_dev = rdev_get_dev(rdev)->parent; + uint8_t val, mask; + + if (check_range(info, min_uV, max_uV)) { + pr_err("invalid voltage range (%d, %d) uV", min_uV, max_uV); + return -EINVAL; + } + + val = (min_uV - info->min_uV + info->step_uV - 1) / info->step_uV; + val <<= info->vol_shift; + mask = ((1 << info->vol_nbits) - 1) << info->vol_shift; + + return da903x_update(da9034_dev, info->vol_reg, val, mask); +} + +static int da903x_get_voltage(struct regulator_dev *rdev) +{ + struct da903x_regulator_info *info = rdev_get_drvdata(rdev); + struct device *da9034_dev = rdev_get_dev(rdev)->parent; + uint8_t val, mask; + int ret; + + ret = da903x_read(da9034_dev, info->vol_reg, &val); + if (ret) + return ret; + + mask = ((1 << info->vol_nbits) - 1) << info->vol_shift; + val = (val & mask) >> info->vol_shift; + + return info->min_uV + info->step_uV * val; +} + +static int da903x_enable(struct regulator_dev *rdev) +{ + struct da903x_regulator_info *info = rdev_get_drvdata(rdev); + struct device *da9034_dev = rdev_get_dev(rdev)->parent; + + return da903x_set_bits(da9034_dev, info->enable_reg, + 1 << info->enable_bit); +} + +static int da903x_disable(struct regulator_dev *rdev) +{ + struct da903x_regulator_info *info = rdev_get_drvdata(rdev); + struct device *da9034_dev = rdev_get_dev(rdev)->parent; + + return da903x_clr_bits(da9034_dev, info->enable_reg, + 1 << info->enable_bit); +} + +static int da903x_is_enabled(struct regulator_dev *rdev) +{ + struct da903x_regulator_info *info = rdev_get_drvdata(rdev); + struct device *da9034_dev = rdev_get_dev(rdev)->parent; + uint8_t reg_val; + int ret; + + ret = da903x_read(da9034_dev, info->enable_reg, ®_val); + if (ret) + return ret; + + return reg_val & (1 << info->enable_bit); +} + +/* DA9030 specific operations */ +static int da9030_set_ldo1_15_voltage(struct regulator_dev *rdev, + int min_uV, int max_uV) +{ + struct da903x_regulator_info *info = rdev_get_drvdata(rdev); + struct device *da903x_dev = rdev_get_dev(rdev)->parent; + uint8_t val, mask; + int ret; + + if (check_range(info, min_uV, max_uV)) { + pr_err("invalid voltage range (%d, %d) uV", min_uV, max_uV); + return -EINVAL; + } + + val = (min_uV - info->min_uV + info->step_uV - 1) / info->step_uV; + val <<= info->vol_shift; + mask = ((1 << info->vol_nbits) - 1) << info->vol_shift; + val |= DA9030_LDO_UNLOCK; /* have to set UNLOCK bits */ + mask |= DA9030_LDO_UNLOCK_MASK; + + /* write twice */ + ret = da903x_update(da903x_dev, info->vol_reg, val, mask); + if (ret) + return ret; + + return da903x_update(da903x_dev, info->vol_reg, val, mask); +} + +static int da9030_set_ldo14_voltage(struct regulator_dev *rdev, + int min_uV, int max_uV) +{ + struct da903x_regulator_info *info = rdev_get_drvdata(rdev); + struct device *da903x_dev = rdev_get_dev(rdev)->parent; + uint8_t val, mask; + int thresh; + + if (check_range(info, min_uV, max_uV)) { + pr_err("invalid voltage range (%d, %d) uV", min_uV, max_uV); + return -EINVAL; + } + + thresh = (info->max_uV + info->min_uV) / 2; + if (min_uV < thresh) { + val = (thresh - min_uV + info->step_uV - 1) / info->step_uV; + val |= 0x4; + } else { + val = (min_uV - thresh + info->step_uV - 1) / info->step_uV; + } + + val <<= info->vol_shift; + mask = ((1 << info->vol_nbits) - 1) << info->vol_shift; + + return da903x_update(da903x_dev, info->vol_reg, val, mask); +} + +static int da9030_get_ldo14_voltage(struct regulator_dev *rdev) +{ + struct da903x_regulator_info *info = rdev_get_drvdata(rdev); + struct device *da903x_dev = rdev_get_dev(rdev)->parent; + uint8_t val, mask; + int ret; + + ret = da903x_read(da903x_dev, info->vol_reg, &val); + if (ret) + return ret; + + mask = ((1 << info->vol_nbits) - 1) << info->vol_shift; + val = (val & mask) >> info->vol_shift; + + if (val & 0x4) + return info->min_uV + info->step_uV * (3 - (val & ~0x4)); + else + return (info->max_uV + info->min_uV) / 2 + + info->step_uV * (val & ~0x4); +} + +/* DA9034 specific operations */ +static int da9034_set_dvc_voltage(struct regulator_dev *rdev, + int min_uV, int max_uV) +{ + struct da903x_regulator_info *info = rdev_get_drvdata(rdev); + struct device *da9034_dev = rdev_get_dev(rdev)->parent; + uint8_t val, mask; + int ret; + + if (check_range(info, min_uV, max_uV)) { + pr_err("invalid voltage range (%d, %d) uV", min_uV, max_uV); + return -EINVAL; + } + + val = (min_uV - info->min_uV + info->step_uV - 1) / info->step_uV; + val <<= info->vol_shift; + mask = ((1 << info->vol_nbits) - 1) << info->vol_shift; + + ret = da903x_update(da9034_dev, info->vol_reg, val, mask); + if (ret) + return ret; + + ret = da903x_set_bits(da9034_dev, info->update_reg, + 1 << info->update_bit); + return ret; +} + +static int da9034_set_ldo12_voltage(struct regulator_dev *rdev, + int min_uV, int max_uV) +{ + struct da903x_regulator_info *info = rdev_get_drvdata(rdev); + struct device *da9034_dev = rdev_get_dev(rdev)->parent; + uint8_t val, mask; + + if (check_range(info, min_uV, max_uV)) { + pr_err("invalid voltage range (%d, %d) uV", min_uV, max_uV); + return -EINVAL; + } + + val = (min_uV - info->min_uV + info->step_uV - 1) / info->step_uV; + val = (val > 7 || val < 20) ? 8 : val - 12; + val <<= info->vol_shift; + mask = ((1 << info->vol_nbits) - 1) << info->vol_shift; + + return da903x_update(da9034_dev, info->vol_reg, val, mask); +} + +static int da9034_get_ldo12_voltage(struct regulator_dev *rdev) +{ + struct da903x_regulator_info *info = rdev_get_drvdata(rdev); + struct device *da9034_dev = rdev_get_dev(rdev)->parent; + uint8_t val, mask; + int ret; + + ret = da903x_read(da9034_dev, info->vol_reg, &val); + if (ret) + return ret; + + mask = ((1 << info->vol_nbits) - 1) << info->vol_shift; + val = (val & mask) >> info->vol_shift; + + if (val >= 8) + return 2700000 + info->step_uV * (val - 8); + + return info->min_uV + info->step_uV * val; +} + +static struct regulator_ops da903x_regulator_ldo_ops = { + .set_voltage = da903x_set_ldo_voltage, + .get_voltage = da903x_get_voltage, + .enable = da903x_enable, + .disable = da903x_disable, + .is_enabled = da903x_is_enabled, +}; + +/* NOTE: this is dedicated for the insane DA9030 LDO14 */ +static struct regulator_ops da9030_regulator_ldo14_ops = { + .set_voltage = da9030_set_ldo14_voltage, + .get_voltage = da9030_get_ldo14_voltage, + .enable = da903x_enable, + .disable = da903x_disable, + .is_enabled = da903x_is_enabled, +}; + +/* NOTE: this is dedicated for the DA9030 LDO1 and LDO15 that have locks */ +static struct regulator_ops da9030_regulator_ldo1_15_ops = { + .set_voltage = da9030_set_ldo1_15_voltage, + .get_voltage = da903x_get_voltage, + .enable = da903x_enable, + .disable = da903x_disable, + .is_enabled = da903x_is_enabled, +}; + +static struct regulator_ops da9034_regulator_dvc_ops = { + .set_voltage = da9034_set_dvc_voltage, + .get_voltage = da903x_get_voltage, + .enable = da903x_enable, + .disable = da903x_disable, + .is_enabled = da903x_is_enabled, +}; + +/* NOTE: this is dedicated for the insane LDO12 */ +static struct regulator_ops da9034_regulator_ldo12_ops = { + .set_voltage = da9034_set_ldo12_voltage, + .get_voltage = da9034_get_ldo12_voltage, + .enable = da903x_enable, + .disable = da903x_disable, + .is_enabled = da903x_is_enabled, +}; + +#define DA903x_LDO(_pmic, _id, min, max, step, vreg, shift, nbits, ereg, ebit) \ +{ \ + .desc = { \ + .name = "LDO" #_id, \ + .ops = &da903x_regulator_ldo_ops, \ + .type = REGULATOR_VOLTAGE, \ + .id = _pmic##_ID_LDO##_id, \ + .owner = THIS_MODULE, \ + }, \ + .min_uV = (min) * 1000, \ + .max_uV = (max) * 1000, \ + .step_uV = (step) * 1000, \ + .vol_reg = _pmic##_##vreg, \ + .vol_shift = (shift), \ + .vol_nbits = (nbits), \ + .enable_reg = _pmic##_##ereg, \ + .enable_bit = (ebit), \ +} + +#define DA9034_DVC(_id, min, max, step, vreg, nbits, ureg, ubit, ereg, ebit) \ +{ \ + .desc = { \ + .name = #_id, \ + .ops = &da9034_regulator_dvc_ops, \ + .type = REGULATOR_VOLTAGE, \ + .id = DA9034_ID_##_id, \ + .owner = THIS_MODULE, \ + }, \ + .min_uV = (min) * 1000, \ + .max_uV = (max) * 1000, \ + .step_uV = (step) * 1000, \ + .vol_reg = DA9034_##vreg, \ + .vol_shift = (0), \ + .vol_nbits = (nbits), \ + .update_reg = DA9034_##ureg, \ + .update_bit = (ubit), \ + .enable_reg = DA9034_##ereg, \ + .enable_bit = (ebit), \ +} + +#define DA9034_LDO(_id, min, max, step, vreg, shift, nbits, ereg, ebit) \ + DA903x_LDO(DA9034, _id, min, max, step, vreg, shift, nbits, ereg, ebit) + +#define DA9030_LDO(_id, min, max, step, vreg, shift, nbits, ereg, ebit) \ + DA903x_LDO(DA9030, _id, min, max, step, vreg, shift, nbits, ereg, ebit) + +static struct da903x_regulator_info da903x_regulator_info[] = { + /* DA9030 */ + DA9030_LDO( 1, 1200, 3200, 100, LDO1, 0, 5, RCTL12, 1), + DA9030_LDO( 2, 1800, 3200, 100, LDO23, 0, 4, RCTL12, 2), + DA9030_LDO( 3, 1800, 3200, 100, LDO23, 4, 4, RCTL12, 3), + DA9030_LDO( 4, 1800, 3200, 100, LDO45, 0, 4, RCTL12, 4), + DA9030_LDO( 5, 1800, 3200, 100, LDO45, 4, 4, RCTL12, 5), + DA9030_LDO( 6, 1800, 3200, 100, LDO6, 0, 4, RCTL12, 6), + DA9030_LDO( 7, 1800, 3200, 100, LDO78, 0, 4, RCTL12, 7), + DA9030_LDO( 8, 1800, 3200, 100, LDO78, 4, 4, RCTL22, 0), + DA9030_LDO( 9, 1800, 3200, 100, LDO912, 0, 4, RCTL22, 1), + DA9030_LDO(10, 1800, 3200, 100, LDO1011, 0, 4, RCTL22, 2), + DA9030_LDO(11, 1800, 3200, 100, LDO1011, 4, 4, RCTL22, 3), + DA9030_LDO(12, 1800, 3200, 100, LDO912, 4, 4, RCTL22, 4), + DA9030_LDO(14, 2760, 2940, 30, LDO1416, 0, 3, RCTL11, 4), + DA9030_LDO(15, 1100, 2650, 50, LDO15, 0, 5, RCTL11, 5), + DA9030_LDO(16, 1100, 2650, 50, LDO1416, 3, 5, RCTL11, 6), + DA9030_LDO(17, 1800, 3200, 100, LDO17, 0, 4, RCTL11, 7), + DA9030_LDO(18, 1800, 3200, 100, LDO1819, 0, 4, RCTL21, 2), + DA9030_LDO(19, 1800, 3200, 100, LDO1819, 4, 4, RCTL21, 1), + DA9030_LDO(13, 2100, 2100, 0, INVAL, 0, 0, RCTL11, 3), /* fixed @2.1V */ + + /* DA9034 */ + DA9034_DVC(BUCK1, 725, 1500, 25, ADTV1, 5, VCC1, 0, OVER1, 0), + DA9034_DVC(BUCK2, 725, 1500, 25, CDTV1, 5, VCC1, 2, OVER1, 1), + DA9034_DVC(LDO2, 725, 1500, 25, SDTV1, 5, VCC1, 4, OVER1, 2), + DA9034_DVC(LDO1, 1700, 2075, 25, MDTV1, 4, VCC1, 6, OVER3, 4), + + DA9034_LDO( 3, 1800, 3300, 100, LDO643, 0, 4, OVER3, 5), + DA9034_LDO( 4, 1800, 2900,1100, LDO643, 4, 1, OVER3, 6), + DA9034_LDO( 6, 2500, 2850, 50, LDO643, 5, 3, OVER2, 0), + DA9034_LDO( 7, 2700, 3050, 50, LDO987, 0, 3, OVER2, 1), + DA9034_LDO( 8, 2700, 2850, 50, LDO987, 3, 2, OVER2, 2), + DA9034_LDO( 9, 2700, 3050, 50, LDO987, 5, 3, OVER2, 3), + DA9034_LDO(10, 2700, 3050, 50, LDO1110, 0, 3, OVER2, 4), + DA9034_LDO(11, 1800, 3300, 100, LDO1110, 4, 4, OVER2, 5), + DA9034_LDO(12, 1700, 3050, 50, LDO1312, 0, 4, OVER3, 6), + DA9034_LDO(13, 1800, 3300, 100, LDO1312, 4, 4, OVER2, 7), + DA9034_LDO(14, 1800, 3300, 100, LDO1514, 0, 4, OVER3, 0), + DA9034_LDO(15, 1800, 3300, 100, LDO1514, 4, 4, OVER3, 1), + DA9034_LDO(5, 3100, 3100, 0, INVAL, 0, 0, OVER3, 7), /* fixed @3.1V */ +}; + +static inline struct da903x_regulator_info *find_regulator_info(int id) +{ + struct da903x_regulator_info *ri; + int i; + + for (i = 0; i < ARRAY_SIZE(da903x_regulator_info); i++) { + ri = &da903x_regulator_info[i]; + if (ri->desc.id == id) + return ri; + } + return NULL; +} + +static int __devinit da903x_regulator_probe(struct platform_device *pdev) +{ + struct da903x_regulator_info *ri = NULL; + struct regulator_dev *rdev; + + ri = find_regulator_info(pdev->id); + if (ri == NULL) { + dev_err(&pdev->dev, "invalid regulator ID specified\n"); + return -EINVAL; + } + + /* Workaround for the weird LDO12 voltage setting */ + if (ri->desc.id == DA9034_ID_LDO12) + ri->desc.ops = &da9034_regulator_ldo12_ops; + + if (ri->desc.id == DA9030_ID_LDO14) + ri->desc.ops = &da9030_regulator_ldo14_ops; + + if (ri->desc.id == DA9030_ID_LDO1 || ri->desc.id == DA9030_ID_LDO15) + ri->desc.ops = &da9030_regulator_ldo1_15_ops; + + rdev = regulator_register(&ri->desc, pdev->dev.parent, ri); + if (IS_ERR(rdev)) { + dev_err(&pdev->dev, "failed to register regulator %s\n", + ri->desc.name); + return PTR_ERR(rdev); + } + + platform_set_drvdata(pdev, rdev); + return 0; +} + +static int __devexit da903x_regulator_remove(struct platform_device *pdev) +{ + struct regulator_dev *rdev = platform_get_drvdata(pdev); + + regulator_unregister(rdev); + return 0; +} + +static struct platform_driver da903x_regulator_driver = { + .driver = { + .name = "da903x-regulator", + .owner = THIS_MODULE, + }, + .probe = da903x_regulator_probe, + .remove = da903x_regulator_remove, +}; + +static int __init da903x_regulator_init(void) +{ + return platform_driver_register(&da903x_regulator_driver); +} +module_init(da903x_regulator_init); + +static void __exit da903x_regulator_exit(void) +{ + platform_driver_unregister(&da903x_regulator_driver); +} +module_exit(da903x_regulator_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Eric Miao " + "Mike Rapoport "); +MODULE_DESCRIPTION("Regulator Driver for Dialog Semiconductor DA903X PMIC"); +MODULE_ALIAS("platform:da903x-regulator");