iwlwifi: move DVM code into subdirectory

Since we're working on another mode/driver
inside iwlwifi, move the current one into a
subdirectory to more cleanly separate the
code. While at it, rename all the files.

Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This commit is contained in:
Johannes Berg 2012-05-15 12:16:34 +02:00
parent 20041ea622
commit 1023fdc485
35 changed files with 106 additions and 115 deletions

View File

@ -1,19 +1,8 @@
# DVM
obj-$(CONFIG_IWLDVM) += iwldvm.o
iwldvm-objs := iwl-agn.o iwl-agn-rs.o iwl-mac80211.o
iwldvm-objs += iwl-ucode.o iwl-agn-tx.o
iwldvm-objs += iwl-agn-lib.o iwl-agn-calib.o
iwldvm-objs += iwl-agn-tt.o iwl-agn-sta.o iwl-agn-rx.o
iwldvm-objs += iwl-eeprom.o iwl-power.o
iwldvm-objs += iwl-scan.o iwl-led.o
iwldvm-objs += iwl-agn-rxon.o iwl-agn-devices.o
iwldvm-$(CONFIG_IWLWIFI_DEBUGFS) += iwl-debugfs.o
iwldvm-$(CONFIG_IWLWIFI_DEVICE_TESTMODE) += iwl-testmode.o
obj-$(CONFIG_IWLDVM) += dvm/
CFLAGS_iwl-devtrace.o := -I$(src)
# WIFI
# common
obj-$(CONFIG_IWLWIFI) += iwlwifi.o
iwlwifi-objs += iwl-io.o
iwlwifi-objs += iwl-drv.o

View File

@ -0,0 +1,13 @@
# DVM
obj-$(CONFIG_IWLDVM) += iwldvm.o
iwldvm-objs += main.o rs.o mac80211.o ucode.o tx.o
iwldvm-objs += lib.o calib.o tt.o sta.o rx.o
iwldvm-objs += eeprom.o power.o
iwldvm-objs += scan.o led.o
iwldvm-objs += rxon.o devices.o
iwldvm-$(CONFIG_IWLWIFI_DEBUGFS) += debugfs.o
iwldvm-$(CONFIG_IWLWIFI_DEVICE_TESTMODE) += testmode.o
ccflags-y += -D__CHECK_ENDIAN__ -I$(src)/../

View File

@ -63,9 +63,10 @@
#ifndef __iwl_agn_h__
#define __iwl_agn_h__
#include "iwl-dev.h"
#include "iwl-config.h"
#include "dev.h"
/* The first 11 queues (0-10) are used otherwise */
#define IWLAGN_FIRST_AMPDU_QUEUE 11

View File

@ -63,10 +63,11 @@
#include <linux/slab.h>
#include <net/mac80211.h>
#include "iwl-dev.h"
#include "iwl-agn-calib.h"
#include "iwl-trans.h"
#include "iwl-agn.h"
#include "dev.h"
#include "calib.h"
#include "agn.h"
/*****************************************************************************
* INIT calibrations framework

View File

@ -62,8 +62,8 @@
#ifndef __iwl_calib_h__
#define __iwl_calib_h__
#include "iwl-dev.h"
#include "iwl-commands.h"
#include "dev.h"
#include "commands.h"
void iwl_chain_noise_calibration(struct iwl_priv *priv);
void iwl_sensitivity_calibration(struct iwl_priv *priv);

View File

@ -61,9 +61,9 @@
*
*****************************************************************************/
/*
* Please use this file (iwl-commands.h) only for uCode API definitions.
* Please use this file (commands.h) only for uCode API definitions.
* Please use iwl-xxxx-hw.h for hardware-related definitions.
* Please use iwl-dev.h for driver implementation definitions.
* Please use dev.h for driver implementation definitions.
*/
#ifndef __iwl_commands_h__

View File

@ -30,16 +30,12 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/debugfs.h>
#include <linux/ieee80211.h>
#include <net/mac80211.h>
#include "iwl-dev.h"
#include "iwl-debug.h"
#include "iwl-io.h"
#include "iwl-agn.h"
#include "iwl-modparams.h"
#include "dev.h"
#include "agn.h"
/* create and remove of files */
#define DEBUGFS_ADD_FILE(name, parent, mode) do { \

View File

@ -24,8 +24,8 @@
*
*****************************************************************************/
/*
* Please use this file (iwl-dev.h) for driver implementation definitions.
* Please use iwl-commands.h for uCode API definitions.
* Please use this file (dev.h) for driver implementation definitions.
* Please use commands.h for uCode API definitions.
*/
#ifndef __iwl_dev_h__
@ -39,17 +39,18 @@
#include <linux/mutex.h>
#include "iwl-fw.h"
#include "iwl-eeprom.h"
#include "iwl-csr.h"
#include "iwl-debug.h"
#include "iwl-agn-hw.h"
#include "iwl-led.h"
#include "iwl-power.h"
#include "iwl-agn-rs.h"
#include "iwl-agn-tt.h"
#include "iwl-trans.h"
#include "iwl-op-mode.h"
#include "iwl-notif-wait.h"
#include "iwl-trans.h"
#include "eeprom.h"
#include "led.h"
#include "power.h"
#include "rs.h"
#include "tt.h"
/* CT-KILL constants */
#define CT_KILL_THRESHOLD_LEGACY 110 /* in Celsius */
@ -664,7 +665,7 @@ struct iwl_lib_ops {
/* device specific configuration */
void (*nic_config)(struct iwl_priv *priv);
/* eeprom operations (as defined in iwl-eeprom.h) */
/* eeprom operations (as defined in eeprom.h) */
struct iwl_eeprom_ops eeprom_ops;
/* temperature */

View File

@ -27,12 +27,13 @@
/*
* DVM device-specific data & functions
*/
#include "iwl-agn.h"
#include "iwl-dev.h"
#include "iwl-commands.h"
#include "iwl-io.h"
#include "iwl-prph.h"
#include "agn.h"
#include "dev.h"
#include "commands.h"
/*
* 1000 series
* ===========

View File

@ -65,15 +65,13 @@
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/init.h>
#include <net/mac80211.h>
#include "iwl-dev.h"
#include "iwl-debug.h"
#include "iwl-agn.h"
#include "iwl-eeprom.h"
#include "iwl-io.h"
#include "iwl-prph.h"
#include "iwl-debug.h"
#include "dev.h"
#include "agn.h"
#include "eeprom.h"
/************************** EEPROM BANDS ****************************
*

View File

@ -34,12 +34,11 @@
#include <net/mac80211.h>
#include <linux/etherdevice.h>
#include <asm/unaligned.h>
#include "iwl-dev.h"
#include "iwl-agn.h"
#include "iwl-io.h"
#include "iwl-trans.h"
#include "iwl-modparams.h"
#include "dev.h"
#include "agn.h"
/* Throughput OFF time(ms) ON time (ms)
* >300 25 25

View File

@ -33,13 +33,14 @@
#include <linux/sched.h>
#include <net/mac80211.h>
#include "iwl-dev.h"
#include "iwl-io.h"
#include "iwl-agn-hw.h"
#include "iwl-agn.h"
#include "iwl-trans.h"
#include "iwl-modparams.h"
#include "dev.h"
#include "agn.h"
int iwlagn_hw_valid_rtc_data_addr(u32 addr)
{
return (addr >= IWLAGN_RTC_DATA_LOWER_BOUND) &&

View File

@ -43,15 +43,16 @@
#include <asm/div64.h>
#include "iwl-eeprom.h"
#include "iwl-dev.h"
#include "iwl-io.h"
#include "iwl-agn-calib.h"
#include "iwl-agn.h"
#include "iwl-trans.h"
#include "iwl-op-mode.h"
#include "iwl-modparams.h"
#include "eeprom.h"
#include "dev.h"
#include "calib.h"
#include "agn.h"
/*****************************************************************************
*
* mac80211 entry point functions

View File

@ -44,16 +44,17 @@
#include <asm/div64.h>
#include "iwl-eeprom.h"
#include "iwl-dev.h"
#include "iwl-io.h"
#include "iwl-agn-calib.h"
#include "iwl-agn.h"
#include "iwl-trans.h"
#include "iwl-op-mode.h"
#include "iwl-drv.h"
#include "iwl-modparams.h"
#include "eeprom.h"
#include "dev.h"
#include "calib.h"
#include "agn.h"
/******************************************************************************
*
* module boiler plate

View File

@ -31,18 +31,16 @@
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/init.h>
#include <net/mac80211.h>
#include "iwl-eeprom.h"
#include "iwl-dev.h"
#include "iwl-agn.h"
#include "iwl-io.h"
#include "iwl-commands.h"
#include "iwl-debug.h"
#include "iwl-power.h"
#include "iwl-trans.h"
#include "iwl-modparams.h"
#include "eeprom.h"
#include "dev.h"
#include "agn.h"
#include "commands.h"
#include "power.h"
/*
* Setting power level allows the card to go to sleep when not busy.

View File

@ -28,7 +28,7 @@
#ifndef __iwl_power_setting_h__
#define __iwl_power_setting_h__
#include "iwl-commands.h"
#include "commands.h"
struct iwl_power_mgr {
struct iwl_powertable_cmd sleep_cmd;

View File

@ -35,10 +35,8 @@
#include <linux/workqueue.h>
#include "iwl-dev.h"
#include "iwl-agn.h"
#include "iwl-op-mode.h"
#include "iwl-modparams.h"
#include "dev.h"
#include "agn.h"
#define RS_NAME "iwl-agn-rs"

View File

@ -29,9 +29,10 @@
#include <net/mac80211.h>
#include "iwl-commands.h"
#include "iwl-config.h"
#include "commands.h"
struct iwl_rate_info {
u8 plcp; /* uCode API: IWL_RATE_6M_PLCP, etc. */
u8 plcp_siso; /* uCode API: IWL_RATE_SISO_6M_PLCP, etc. */

View File

@ -32,12 +32,11 @@
#include <linux/sched.h>
#include <net/mac80211.h>
#include <asm/unaligned.h>
#include "iwl-eeprom.h"
#include "iwl-dev.h"
#include "iwl-io.h"
#include "iwl-agn-calib.h"
#include "iwl-agn.h"
#include "iwl-modparams.h"
#include "eeprom.h"
#include "dev.h"
#include "calib.h"
#include "agn.h"
#define IWL_CMD_ENTRY(x) [x] = #x

View File

@ -25,11 +25,11 @@
*****************************************************************************/
#include <linux/etherdevice.h>
#include "iwl-dev.h"
#include "iwl-agn.h"
#include "iwl-agn-calib.h"
#include "iwl-trans.h"
#include "iwl-modparams.h"
#include "dev.h"
#include "agn.h"
#include "calib.h"
/*
* initialize rxon structure with default values from eeprom

View File

@ -30,11 +30,9 @@
#include <linux/etherdevice.h>
#include <net/mac80211.h>
#include "iwl-eeprom.h"
#include "iwl-dev.h"
#include "iwl-io.h"
#include "iwl-agn.h"
#include "iwl-trans.h"
#include "eeprom.h"
#include "dev.h"
#include "agn.h"
/* For active scan, listen ACTIVE_DWELL_TIME (msec) on each channel after
* sending probe req. This should be set long enough to hear probe responses

View File

@ -28,10 +28,9 @@
*****************************************************************************/
#include <linux/etherdevice.h>
#include <net/mac80211.h>
#include "iwl-dev.h"
#include "iwl-agn.h"
#include "iwl-trans.h"
#include "dev.h"
#include "agn.h"
const u8 iwl_bcast_addr[ETH_ALEN] = { 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF };

View File

@ -69,15 +69,14 @@
#include <net/cfg80211.h>
#include <net/mac80211.h>
#include <net/netlink.h>
#include "iwl-dev.h"
#include "iwl-debug.h"
#include "iwl-io.h"
#include "iwl-agn.h"
#include "iwl-testmode.h"
#include "iwl-trans.h"
#include "iwl-fh.h"
#include "iwl-prph.h"
#include "dev.h"
#include "agn.h"
#include "testmode.h"
/* Periphery registers absolute lower bound. This is used in order to
@ -89,7 +88,7 @@
/* The TLVs used in the gnl message policy between the kernel module and
* user space application. iwl_testmode_gnl_msg_policy is to be carried
* through the NL80211_CMD_TESTMODE channel regulated by nl80211.
* See iwl-testmode.h
* See testmode.h
*/
static
struct nla_policy iwl_testmode_gnl_msg_policy[IWL_TM_ATTR_MAX] = {
@ -129,7 +128,7 @@ struct nla_policy iwl_testmode_gnl_msg_policy[IWL_TM_ATTR_MAX] = {
};
/*
* See the struct iwl_rx_packet in iwl-commands.h for the format of the
* See the struct iwl_rx_packet in commands.h for the format of the
* received events from the device
*/
static inline int get_event_length(struct iwl_rx_cmd_buffer *rxb)

View File

@ -31,17 +31,15 @@
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/init.h>
#include <net/mac80211.h>
#include "iwl-agn.h"
#include "iwl-eeprom.h"
#include "iwl-dev.h"
#include "iwl-io.h"
#include "iwl-commands.h"
#include "iwl-debug.h"
#include "iwl-agn-tt.h"
#include "iwl-modparams.h"
#include "iwl-debug.h"
#include "agn.h"
#include "eeprom.h"
#include "dev.h"
#include "commands.h"
#include "tt.h"
/* default Thermal Throttling transaction table
* Current state | Throttling Down | Throttling Up

View File

@ -28,7 +28,7 @@
#ifndef __iwl_tt_setting_h__
#define __iwl_tt_setting_h__
#include "iwl-commands.h"
#include "commands.h"
#define IWL_ABSOLUTE_ZERO 0
#define IWL_ABSOLUTE_MAX 0xFFFFFFFF

View File

@ -32,12 +32,11 @@
#include <linux/init.h>
#include <linux/sched.h>
#include <linux/ieee80211.h>
#include "iwl-dev.h"
#include "iwl-io.h"
#include "iwl-agn-hw.h"
#include "iwl-agn.h"
#include "iwl-trans.h"
#include "iwl-agn-hw.h"
#include "dev.h"
#include "agn.h"
static const u8 tid_to_ac[] = {
IEEE80211_AC_BE,

View File

@ -30,15 +30,16 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include "iwl-dev.h"
#include "iwl-io.h"
#include "iwl-agn-hw.h"
#include "iwl-agn.h"
#include "iwl-agn-calib.h"
#include "iwl-trans.h"
#include "iwl-fh.h"
#include "iwl-op-mode.h"
#include "dev.h"
#include "agn.h"
#include "calib.h"
/******************************************************************************
*
* uCode download functions

View File

@ -28,6 +28,7 @@
#define __IWLWIFI_DEVICE_TRACE
#include <linux/tracepoint.h>
#include <linux/device.h>
#if !defined(CONFIG_IWLWIFI_DEVICE_TRACING) || defined(__CHECKER__)

View File

@ -29,7 +29,7 @@
#include "iwl-config.h"
#include "iwl-agn-hw.h"
#include "cfg.h"
#include "iwl-commands.h" /* needed for BT for now */
#include "dvm/commands.h" /* needed for BT for now */
/* Highest firmware API version supported */
#define IWL2030_UCODE_API_MAX 6

View File

@ -29,7 +29,7 @@
#include "iwl-config.h"
#include "iwl-agn-hw.h"
#include "cfg.h"
#include "iwl-commands.h" /* needed for BT for now */
#include "dvm/commands.h" /* needed for BT for now */
/* Highest firmware API version supported */
#define IWL6000_UCODE_API_MAX 6

View File

@ -72,11 +72,10 @@
#include "iwl-trans.h"
#include "iwl-csr.h"
#include "iwl-prph.h"
#include "iwl-eeprom.h"
#include "iwl-agn-hw.h"
#include "internal.h"
/* FIXME: need to abstract out TX command (once we know what it looks like) */
#include "iwl-commands.h"
#include "dvm/commands.h"
#define SCD_QUEUECHAIN_SEL_ALL(trans, trans_pcie) \
(((1<<trans->cfg->base_params->num_of_queues) - 1) &\

View File

@ -34,11 +34,10 @@
#include "iwl-csr.h"
#include "iwl-prph.h"
#include "iwl-io.h"
#include "iwl-agn-hw.h"
#include "iwl-op-mode.h"
#include "internal.h"
/* FIXME: need to abstract out TX command (once we know what it looks like) */
#include "iwl-commands.h"
#include "dvm/commands.h"
#define IWL_TX_CRC_SIZE 4
#define IWL_TX_DELIMITER_SIZE 4