regulator: rk808: add the description about dvs gpio for rk808
add the description about dvs1, dvs2, and add the example. Signed-off-by: Chris Zhong <zyw@rock-chips.com> Reviewed-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
This commit is contained in:
parent
bc0195aad0
commit
0ec5f8bd99
|
@ -24,6 +24,10 @@ Optional properties:
|
||||||
- vcc10-supply: The input supply for LDO_REG6
|
- vcc10-supply: The input supply for LDO_REG6
|
||||||
- vcc11-supply: The input supply for LDO_REG8
|
- vcc11-supply: The input supply for LDO_REG8
|
||||||
- vcc12-supply: The input supply for SWITCH_REG2
|
- vcc12-supply: The input supply for SWITCH_REG2
|
||||||
|
- dvs-gpios: buck1/2 can be controlled by gpio dvs, this is GPIO specifiers
|
||||||
|
for 2 host gpio's used for dvs. The format of the gpio specifier depends in
|
||||||
|
the gpio controller. If DVS GPIOs aren't present, voltage changes will happen
|
||||||
|
very quickly with no slow ramp time.
|
||||||
|
|
||||||
Regulators: All the regulators of RK808 to be instantiated shall be
|
Regulators: All the regulators of RK808 to be instantiated shall be
|
||||||
listed in a child node named 'regulators'. Each regulator is represented
|
listed in a child node named 'regulators'. Each regulator is represented
|
||||||
|
@ -55,7 +59,9 @@ Example:
|
||||||
interrupt-parent = <&gpio0>;
|
interrupt-parent = <&gpio0>;
|
||||||
interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
|
interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
|
||||||
pinctrl-names = "default";
|
pinctrl-names = "default";
|
||||||
pinctrl-0 = <&pmic_int>;
|
pinctrl-0 = <&pmic_int &dvs_1 &dvs_2>;
|
||||||
|
dvs-gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>,
|
||||||
|
<&gpio7 15 GPIO_ACTIVE_HIGH>;
|
||||||
reg = <0x1b>;
|
reg = <0x1b>;
|
||||||
rockchip,system-power-controller;
|
rockchip,system-power-controller;
|
||||||
wakeup-source;
|
wakeup-source;
|
||||||
|
|
Loading…
Reference in New Issue