[media] V4L: tw9910: support the new mbus-config subdev ops

Extend the driver to also support [gs]_mbus_config() subdevice video
operations.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
This commit is contained in:
Guennadi Liakhovetski 2011-07-26 13:29:27 -03:00 committed by Mauro Carvalho Chehab
parent 2ad90b7123
commit 0d3263f9ad
1 changed files with 47 additions and 2 deletions

View File

@ -23,10 +23,12 @@
#include <linux/kernel.h>
#include <linux/delay.h>
#include <linux/videodev2.h>
#include <media/soc_camera.h>
#include <media/soc_mediabus.h>
#include <media/tw9910.h>
#include <media/v4l2-chip-ident.h>
#include <media/v4l2-subdev.h>
#include <media/soc_camera.h>
#include <media/tw9910.h>
#define GET_ID(val) ((val & 0xF8) >> 3)
#define GET_REV(val) (val & 0x07)
@ -862,6 +864,47 @@ static int tw9910_enum_fmt(struct v4l2_subdev *sd, unsigned int index,
return 0;
}
static int tw9910_g_mbus_config(struct v4l2_subdev *sd,
struct v4l2_mbus_config *cfg)
{
struct i2c_client *client = v4l2_get_subdevdata(sd);
struct soc_camera_device *icd = client->dev.platform_data;
struct soc_camera_link *icl = to_soc_camera_link(icd);
cfg->flags = V4L2_MBUS_PCLK_SAMPLE_RISING | V4L2_MBUS_MASTER |
V4L2_MBUS_VSYNC_ACTIVE_HIGH | V4L2_MBUS_VSYNC_ACTIVE_LOW |
V4L2_MBUS_HSYNC_ACTIVE_HIGH | V4L2_MBUS_HSYNC_ACTIVE_LOW |
V4L2_MBUS_DATA_ACTIVE_HIGH;
cfg->type = V4L2_MBUS_PARALLEL;
cfg->flags = soc_camera_apply_board_flags(icl, cfg);
return 0;
}
static int tw9910_s_mbus_config(struct v4l2_subdev *sd,
const struct v4l2_mbus_config *cfg)
{
struct i2c_client *client = v4l2_get_subdevdata(sd);
struct soc_camera_device *icd = client->dev.platform_data;
struct soc_camera_link *icl = to_soc_camera_link(icd);
u8 val = VSSL_VVALID | HSSL_DVALID;
unsigned long flags = soc_camera_apply_board_flags(icl, cfg);
/*
* set OUTCTR1
*
* We use VVALID and DVALID signals to control VSYNC and HSYNC
* outputs, in this mode their polarity is inverted.
*/
if (flags & V4L2_MBUS_HSYNC_ACTIVE_LOW)
val |= HSP_HI;
if (flags & V4L2_MBUS_VSYNC_ACTIVE_LOW)
val |= VSP_HI;
return i2c_smbus_write_byte_data(client, OUTCTR1, val);
}
static struct v4l2_subdev_video_ops tw9910_subdev_video_ops = {
.s_stream = tw9910_s_stream,
.g_mbus_fmt = tw9910_g_fmt,
@ -870,6 +913,8 @@ static struct v4l2_subdev_video_ops tw9910_subdev_video_ops = {
.cropcap = tw9910_cropcap,
.g_crop = tw9910_g_crop,
.enum_mbus_fmt = tw9910_enum_fmt,
.g_mbus_config = tw9910_g_mbus_config,
.s_mbus_config = tw9910_s_mbus_config,
};
static struct v4l2_subdev_ops tw9910_subdev_ops = {