hollalinux
/
linux-sg2042
mirror of https://github.com/sophgo/linux-riscv.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net 

Conflicts:
	drivers/net/ethernet/freescale/fec_main.c
	drivers/net/ethernet/renesas/sh_eth.c
	net/ipv4/gre.c

The GRE conflict is between a bug fix (kfree_skb --> kfree_skb_list)
and the splitting of the gre.c code into seperate files.

The FEC conflict was two sets of changes adding ethtool support code
in an "!CONFIG_M5272" CPP protected block.

Finally the sh_eth.c conflict was between one commit add bits set
in the .eesr_err_check mask whilst another commit removed the
.tx_error_check member and assignments.

Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
David S. Miller 2013-07-03 14:50:41 -07:00
parent c50cd35788 8bb495e3f0
commit 0c1072ae02
262 changed files with 2182 additions and 1277 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

37
Documentation/DocBook/media/v4l/dev-codec.xml
View File

@ -1,18 +1,27 @@
<title>Codec Interface</title>
<note>
<title>Suspended</title>
<para>This interface has been be suspended from the V4L2 API
implemented in Linux 2.6 until we have more experience with codec
device interfaces.</para>
</note>
<para>A V4L2 codec can compress, decompress, transform, or otherwise
convert video data from one format into another format, in memory.
Applications send data to be converted to the driver through a
&func-write; call, and receive the converted data through a
&func-read; call. For efficiency a driver may also support streaming
I/O.</para>
convert video data from one format into another format, in memory. Typically
such devices are memory-to-memory devices (i.e. devices with the
<constant>V4L2_CAP_VIDEO_M2M</constant> or <constant>V4L2_CAP_VIDEO_M2M_MPLANE</constant>
capability set).
</para>
<para>[to do]</para>
<para>A memory-to-memory video node acts just like a normal video node, but it
supports both output (sending frames from memory to the codec hardware) and
capture (receiving the processed frames from the codec hardware into memory)
stream I/O. An application will have to setup the stream
I/O for both sides and finally call &VIDIOC-STREAMON; for both capture and output
to start the codec.</para>
<para>Video compression codecs use the MPEG controls to setup their codec parameters
(note that the MPEG controls actually support many more codecs than just MPEG).
See <xref linkend="mpeg-controls"></xref>.</para>
<para>Memory-to-memory devices can often be used as a shared resource: you can
open the video node multiple times, each application setting up their own codec properties
that are local to the file handle, and each can use it independently from the others.
The driver will arbitrate access to the codec and reprogram it whenever another file
handler gets access. This is different from the usual video node behavior where the video properties
are global to the device (i.e. changing something through one file handle is visible
through another file handle).</para>

2
Documentation/DocBook/media/v4l/v4l2.xml
View File

@ -493,7 +493,7 @@ and discussions on the V4L mailing list.</revremark>
</partinfo>
<title>Video for Linux Two API Specification</title>
<subtitle>Revision 3.9</subtitle>
<subtitle>Revision 3.10</subtitle>
<chapter id="common">
&sub-common;

2
Documentation/devicetree/bindings/media/exynos-fimc-lite.txt
View File

@ -2,7 +2,7 @@ Exynos4x12/Exynos5 SoC series camera host interface (FIMC-LITE)
Required properties:
- compatible : should be "samsung,exynos4212-fimc" for Exynos4212 and
- compatible : should be "samsung,exynos4212-fimc-lite" for Exynos4212 and
Exynos4412 SoCs;
- reg : physical base address and size of the device memory mapped
registers;

4
Documentation/networking/ip-sysctl.txt
View File

@ -420,10 +420,10 @@ tcp_synack_retries - INTEGER
for a passive TCP connection will happen after 63seconds.
tcp_syncookies - BOOLEAN
Only valid when the kernel was compiled with CONFIG_SYNCOOKIES
Only valid when the kernel was compiled with CONFIG_SYN_COOKIES
Send out syncookies when the syn backlog queue of a socket
overflows. This is to prevent against the common 'SYN flood attack'
Default: FALSE
Default: 1
Note, that syncookies is fallback facility.
It MUST NOT be used to help highly loaded servers to stand

3
Documentation/sound/alsa/HD-Audio-Models.txt
View File

@ -29,6 +29,8 @@ ALC269/270/275/276/280/282
alc271-dmic Enable ALC271X digital mic workaround
inv-dmic Inverted internal mic workaround
lenovo-dock Enables docking station I/O for some Lenovos
dell-headset-multi Headset jack, which can also be used as mic-in
dell-headset-dock Headset jack (without mic-in), and also dock I/O
ALC662/663/272
==============
@ -42,6 +44,7 @@ ALC662/663/272
asus-mode7 ASUS
asus-mode8 ASUS
inv-dmic Inverted internal mic workaround
dell-headset-multi Headset jack, which can also be used as mic-in
ALC680
======

2
MAINTAINERS
View File

@ -3225,7 +3225,7 @@ F: lib/fault-inject.c
FCOE SUBSYSTEM (libfc, libfcoe, fcoe)
M: Robert Love <robert.w.love@intel.com>
L: devel@open-fcoe.org
L: fcoe-devel@open-fcoe.org
W: www.Open-FCoE.org
S: Supported
F: drivers/scsi/libfc/

2
Makefile
View File

@ -1,7 +1,7 @@
VERSION = 3
PATCHLEVEL = 10
SUBLEVEL = 0
EXTRAVERSION = -rc6
EXTRAVERSION =
NAME = Unicycling Gorilla
# *DOCUMENTATION*

26
arch/arm/Kconfig
View File

@ -1087,6 +1087,20 @@ if !MMU
source "arch/arm/Kconfig-nommu"
endif
config PJ4B_ERRATA_4742
bool "PJ4B Errata 4742: IDLE Wake Up Commands can Cause the CPU Core to Cease Operation"
depends on CPU_PJ4B && MACH_ARMADA_370
default y
help
When coming out of either a Wait for Interrupt (WFI) or a Wait for
Event (WFE) IDLE states, a specific timing sensitivity exists between
the retiring WFI/WFE instructions and the newly issued subsequent
instructions. This sensitivity can result in a CPU hang scenario.
Workaround:
The software must insert either a Data Synchronization Barrier (DSB)
or Data Memory Barrier (DMB) command immediately after the WFI/WFE
instruction
config ARM_ERRATA_326103
bool "ARM errata: FSR write bit incorrect on a SWP to read-only memory"
depends on CPU_V6
@ -1189,6 +1203,16 @@ config PL310_ERRATA_588369
is not correctly implemented in PL310 as clean lines are not
invalidated as a result of these operations.
config ARM_ERRATA_643719
bool "ARM errata: LoUIS bit field in CLIDR register is incorrect"
depends on CPU_V7 && SMP
help
This option enables the workaround for the 643719 Cortex-A9 (prior to
r1p0) erratum. On affected cores the LoUIS bit field of the CLIDR
register returns zero when it should return one. The workaround
corrects this value, ensuring cache maintenance operations which use
it behave as intended and avoiding data corruption.
config ARM_ERRATA_720789
bool "ARM errata: TLBIASIDIS and TLBIMVAIS operations can broadcast a faulty ASID"
depends on CPU_V7
@ -2006,7 +2030,7 @@ config XIP_PHYS_ADDR
config KEXEC
bool "Kexec system call (EXPERIMENTAL)"
depends on (!SMP || HOTPLUG_CPU)
depends on (!SMP || PM_SLEEP_SMP)
help
kexec is a system call that implements the ability to shutdown your
current kernel, and to start another kernel. It is like a reboot

3
arch/arm/boot/compressed/Makefile
View File

@ -116,7 +116,8 @@ targets := vmlinux vmlinux.lds \
# Make sure files are removed during clean
extra-y += piggy.gzip piggy.lzo piggy.lzma piggy.xzkern \
lib1funcs.S ashldi3.S $(libfdt) $(libfdt_hdrs)
lib1funcs.S ashldi3.S $(libfdt) $(libfdt_hdrs) \
hyp-stub.S
ifeq ($(CONFIG_FUNCTION_TRACER),y)
ORIG_CFLAGS := $(KBUILD_CFLAGS)

2
arch/arm/boot/dts/exynos5250-pinctrl.dtsi
View File

@ -763,7 +763,7 @@
};
};
pinctrl@03680000 {
pinctrl@03860000 {
gpz: gpz {
gpio-controller;
#gpio-cells = <2>;

4
arch/arm/boot/dts/exynos5250.dtsi
View File

@ -161,9 +161,9 @@
interrupts = <0 50 0>;
};
pinctrl_3: pinctrl@03680000 {
pinctrl_3: pinctrl@03860000 {
compatible = "samsung,exynos5250-pinctrl";
reg = <0x0368000 0x1000>;
reg = <0x03860000 0x1000>;
interrupts = <0 47 0>;
};

4
arch/arm/include/asm/cacheflush.h
View File

@ -320,9 +320,7 @@ static inline void flush_anon_page(struct vm_area_struct *vma,
}
#define ARCH_HAS_FLUSH_KERNEL_DCACHE_PAGE
static inline void flush_kernel_dcache_page(struct page *page)
{
}
extern void flush_kernel_dcache_page(struct page *);
#define flush_dcache_mmap_lock(mapping) \
spin_lock_irq(&(mapping)->tree_lock)

2
arch/arm/include/asm/cputype.h
View File

@ -32,6 +32,8 @@
#define MPIDR_HWID_BITMASK 0xFFFFFF
#define MPIDR_INVALID (~MPIDR_HWID_BITMASK)
#define MPIDR_LEVEL_BITS 8
#define MPIDR_LEVEL_MASK ((1 << MPIDR_LEVEL_BITS) - 1)

9
arch/arm/include/asm/glue-proc.h
View File

@ -230,6 +230,15 @@
# endif
#endif
#ifdef CONFIG_CPU_PJ4B
# ifdef CPU_NAME
# undef MULTI_CPU
# define MULTI_CPU
# else
# define CPU_NAME cpu_pj4b
# endif
#endif
#ifndef MULTI_CPU
#define cpu_proc_init __glue(CPU_NAME,_proc_init)
#define cpu_proc_fin __glue(CPU_NAME,_proc_fin)

2
arch/arm/include/asm/smp_plat.h
View File

@ -49,7 +49,7 @@ static inline int cache_ops_need_broadcast(void)
/*
* Logical CPU mapping.
*/
extern int __cpu_logical_map[];
extern u32 __cpu_logical_map[];
#define cpu_logical_map(cpu) __cpu_logical_map[cpu]
/*
* Retrieve logical cpu index corresponding to a given MPIDR[23:0]

10
arch/arm/kernel/devtree.c
View File

@ -82,7 +82,7 @@ void __init arm_dt_init_cpu_maps(void)
u32 i, j, cpuidx = 1;
u32 mpidr = is_smp() ? read_cpuid_mpidr() & MPIDR_HWID_BITMASK : 0;
u32 tmp_map[NR_CPUS] = { [0 ... NR_CPUS-1] = UINT_MAX };
u32 tmp_map[NR_CPUS] = { [0 ... NR_CPUS-1] = MPIDR_INVALID };
bool bootcpu_valid = false;
cpus = of_find_node_by_path("/cpus");
@ -92,6 +92,9 @@ void __init arm_dt_init_cpu_maps(void)
for_each_child_of_node(cpus, cpu) {
u32 hwid;
if (of_node_cmp(cpu->type, "cpu"))
continue;
pr_debug(" * %s...\n", cpu->full_name);
/*
* A device tree containing CPU nodes with missing "reg"
@ -149,9 +152,10 @@ void __init arm_dt_init_cpu_maps(void)
tmp_map[i] = hwid;
}
if (WARN(!bootcpu_valid, "DT missing boot CPU MPIDR[23:0], "
"fall back to default cpu_logical_map\n"))
if (!bootcpu_valid) {
pr_warn("DT missing boot CPU MPIDR[23:0], fall back to default cpu_logical_map\n");
return;
}
/*
* Since the boot CPU node contains proper data, and all nodes have

4
arch/arm/kernel/machine_kexec.c
View File

@ -134,6 +134,10 @@ void machine_kexec(struct kimage *image)
unsigned long reboot_code_buffer_phys;
void *reboot_code_buffer;
if (num_online_cpus() > 1) {
pr_err("kexec: error: multiple CPUs still online\n");
return;
}
page_list = image->head & PAGE_MASK;

43
arch/arm/kernel/process.c
View File

@ -184,30 +184,61 @@ int __init reboot_setup(char *str)
__setup("reboot=", reboot_setup);
/*
* Called by kexec, immediately prior to machine_kexec().
*
* This must completely disable all secondary CPUs; simply causing those CPUs
* to execute e.g. a RAM-based pin loop is not sufficient. This allows the
* kexec'd kernel to use any and all RAM as it sees fit, without having to
* avoid any code or data used by any SW CPU pin loop. The CPU hotplug
* functionality embodied in disable_nonboot_cpus() to achieve this.
*/
void machine_shutdown(void)
{
#ifdef CONFIG_SMP
smp_send_stop();
#endif
disable_nonboot_cpus();
}
/*
* Halting simply requires that the secondary CPUs stop performing any
* activity (executing tasks, handling interrupts). smp_send_stop()
* achieves this.
*/
void machine_halt(void)
{
machine_shutdown();
smp_send_stop();
local_irq_disable();
while (1);
}
/*
* Power-off simply requires that the secondary CPUs stop performing any
* activity (executing tasks, handling interrupts). smp_send_stop()
* achieves this. When the system power is turned off, it will take all CPUs
* with it.
*/
void machine_power_off(void)
{
machine_shutdown();
smp_send_stop();
if (pm_power_off)
pm_power_off();
}
/*
* Restart requires that the secondary CPUs stop performing any activity
* while the primary CPU resets the system. Systems with a single CPU can
* use soft_restart() as their machine descriptor's .restart hook, since that
* will cause the only available CPU to reset. Systems with multiple CPUs must
* provide a HW restart implementation, to ensure that all CPUs reset at once.
* This is required so that any code running after reset on the primary CPU
* doesn't have to co-ordinate with other CPUs to ensure they aren't still
* executing pre-reset code, and using RAM that the primary CPU's code wishes
* to use. Implementing such co-ordination would be essentially impossible.
*/
void machine_restart(char *cmd)
{
machine_shutdown();
smp_send_stop();
arm_pm_restart(reboot_mode, cmd);

2
arch/arm/kernel/setup.c
View File

@ -444,7 +444,7 @@ void notrace cpu_init(void)
: "r14");
}
int __cpu_logical_map[NR_CPUS];
u32 __cpu_logical_map[NR_CPUS] = { [0 ... NR_CPUS-1] = MPIDR_INVALID };
void __init smp_setup_processor_id(void)
{

13
arch/arm/kernel/smp.c
View File

@ -651,17 +651,6 @@ void smp_send_reschedule(int cpu)
smp_cross_call(cpumask_of(cpu), IPI_RESCHEDULE);
}
#ifdef CONFIG_HOTPLUG_CPU
static void smp_kill_cpus(cpumask_t *mask)
{
unsigned int cpu;
for_each_cpu(cpu, mask)
platform_cpu_kill(cpu);
}
#else
static void smp_kill_cpus(cpumask_t *mask) { }
#endif
void smp_send_stop(void)
{
unsigned long timeout;
@ -679,8 +668,6 @@ void smp_send_stop(void)
if (num_online_cpus() > 1)
pr_warning("SMP: failed to stop secondary CPUs\n");
smp_kill_cpus(&mask);
}
/*

8
arch/arm/mm/cache-v7.S
View File

@ -92,6 +92,14 @@ ENTRY(v7_flush_dcache_louis)
mrc p15, 1, r0, c0, c0, 1 @ read clidr, r0 = clidr
ALT_SMP(ands r3, r0, #(7 << 21)) @ extract LoUIS from clidr
ALT_UP(ands r3, r0, #(7 << 27)) @ extract LoUU from clidr
#ifdef CONFIG_ARM_ERRATA_643719
ALT_SMP(mrceq p15, 0, r2, c0, c0, 0) @ read main ID register
ALT_UP(moveq pc, lr) @ LoUU is zero, so nothing to do
ldreq r1, =0x410fc090 @ ID of ARM Cortex A9 r0p?
biceq r2, r2, #0x0000000f @ clear minor revision number
teqeq r2, r1 @ test for errata affected core and if so...
orreqs r3, #(1 << 21) @ fix LoUIS value (and set flags state to 'ne')
#endif
ALT_SMP(mov r3, r3, lsr #20) @ r3 = LoUIS * 2
ALT_UP(mov r3, r3, lsr #26) @ r3 = LoUU * 2
moveq pc, lr @ return if level == 0

33
arch/arm/mm/flush.c
View File

@ -300,6 +300,39 @@ void flush_dcache_page(struct page *page)
}
EXPORT_SYMBOL(flush_dcache_page);
/*
* Ensure cache coherency for the kernel mapping of this page. We can
* assume that the page is pinned via kmap.
*
* If the page only exists in the page cache and there are no user
* space mappings, this is a no-op since the page was already marked
* dirty at creation. Otherwise, we need to flush the dirty kernel
* cache lines directly.
*/
void flush_kernel_dcache_page(struct page *page)
{
if (cache_is_vivt() || cache_is_vipt_aliasing()) {
struct address_space *mapping;
mapping = page_mapping(page);
if (!mapping || mapping_mapped(mapping)) {
void *addr;
addr = page_address(page);
/*
* kmap_atomic() doesn't set the page virtual
* address for highmem pages, and
* kunmap_atomic() takes care of cache
* flushing already.
*/
if (!IS_ENABLED(CONFIG_HIGHMEM) || addr)
__cpuc_flush_dcache_area(addr, PAGE_SIZE);
}
}
}
EXPORT_SYMBOL(flush_kernel_dcache_page);
/*
* Flush an anonymous page so that users of get_user_pages()
* can safely access the data. The expected sequence is:

8
arch/arm/mm/mmu.c
View File

@ -616,10 +616,12 @@ static void __init alloc_init_pte(pmd_t *pmd, unsigned long addr,
} while (pte++, addr += PAGE_SIZE, addr != end);
}
static void __init map_init_section(pmd_t *pmd, unsigned long addr,
static void __init __map_init_section(pmd_t *pmd, unsigned long addr,
unsigned long end, phys_addr_t phys,
const struct mem_type *type)
{
pmd_t *p = pmd;
#ifndef CONFIG_ARM_LPAE
/*
* In classic MMU format, puds and pmds are folded in to
@ -638,7 +640,7 @@ static void __init map_init_section(pmd_t *pmd, unsigned long addr,
phys += SECTION_SIZE;
} while (pmd++, addr += SECTION_SIZE, addr != end);
flush_pmd_entry(pmd);
flush_pmd_entry(p);
}
static void __init alloc_init_pmd(pud_t *pud, unsigned long addr,
@ -661,7 +663,7 @@ static void __init alloc_init_pmd(pud_t *pud, unsigned long addr,
*/
if (type->prot_sect &&
((addr | next | phys) & ~SECTION_MASK) == 0) {
map_init_section(pmd, addr, next, phys, type);
__map_init_section(pmd, addr, next, phys, type);
} else {
alloc_init_pte(pmd, addr, next,
__phys_to_pfn(phys), type);

6
arch/arm/mm/nommu.c
View File

@ -57,6 +57,12 @@ void flush_dcache_page(struct page *page)
}
EXPORT_SYMBOL(flush_dcache_page);
void flush_kernel_dcache_page(struct page *page)
{
__cpuc_flush_dcache_area(page_address(page), PAGE_SIZE);
}
EXPORT_SYMBOL(flush_kernel_dcache_page);
void copy_to_user_page(struct vm_area_struct *vma, struct page *page,
unsigned long uaddr, void *dst, const void *src,
unsigned long len)

1
arch/arm/mm/proc-fa526.S
View File

@ -81,7 +81,6 @@ ENDPROC(cpu_fa526_reset)
*/
.align 4
ENTRY(cpu_fa526_do_idle)
mcr p15, 0, r0, c7, c0, 4 @ Wait for interrupt
mov pc, lr

5
arch/arm/mm/proc-macros.S
View File

@ -333,3 +333,8 @@ ENTRY(\name\()_tlb_fns)
.endif
.size \name\()_tlb_fns, . - \name\()_tlb_fns
.endm
.macro globl_equ x, y
.globl \x
.equ \x, \y
.endm

38
arch/arm/mm/proc-v7.S
View File

@ -138,6 +138,29 @@ ENTRY(cpu_v7_do_resume)
mov r0, r8 @ control register
b cpu_resume_mmu
ENDPROC(cpu_v7_do_resume)
#endif
#ifdef CONFIG_CPU_PJ4B
globl_equ cpu_pj4b_switch_mm, cpu_v7_switch_mm
globl_equ cpu_pj4b_set_pte_ext, cpu_v7_set_pte_ext
globl_equ cpu_pj4b_proc_init, cpu_v7_proc_init
globl_equ cpu_pj4b_proc_fin, cpu_v7_proc_fin
globl_equ cpu_pj4b_reset, cpu_v7_reset
#ifdef CONFIG_PJ4B_ERRATA_4742
ENTRY(cpu_pj4b_do_idle)
dsb @ WFI may enter a low-power mode
wfi
dsb @barrier
mov pc, lr
ENDPROC(cpu_pj4b_do_idle)
#else
globl_equ cpu_pj4b_do_idle, cpu_v7_do_idle
#endif
globl_equ cpu_pj4b_dcache_clean_area, cpu_v7_dcache_clean_area
globl_equ cpu_pj4b_do_suspend, cpu_v7_do_suspend
globl_equ cpu_pj4b_do_resume, cpu_v7_do_resume
globl_equ cpu_pj4b_suspend_size, cpu_v7_suspend_size
#endif
__CPUINIT
@ -350,6 +373,9 @@ __v7_setup_stack:
@ define struct processor (see <asm/proc-fns.h> and proc-macros.S)
define_processor_functions v7, dabort=v7_early_abort, pabort=v7_pabort, suspend=1
#ifdef CONFIG_CPU_PJ4B
define_processor_functions pj4b, dabort=v7_early_abort, pabort=v7_pabort, suspend=1
#endif
.section ".rodata"
@ -362,7 +388,7 @@ __v7_setup_stack:
/*
* Standard v7 proc info content
*/
.macro __v7_proc initfunc, mm_mmuflags = 0, io_mmuflags = 0, hwcaps = 0
.macro __v7_proc initfunc, mm_mmuflags = 0, io_mmuflags = 0, hwcaps = 0, proc_fns = v7_processor_functions
ALT_SMP(.long PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_SECT_AP_READ | \
PMD_SECT_AF | PMD_FLAGS_SMP | \mm_mmuflags)
ALT_UP(.long PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_SECT_AP_READ | \
@ -375,7 +401,7 @@ __v7_setup_stack:
.long HWCAP_SWP | HWCAP_HALF | HWCAP_THUMB | HWCAP_FAST_MULT | \
HWCAP_EDSP | HWCAP_TLS | \hwcaps
.long cpu_v7_name
.long v7_processor_functions
.long \proc_fns
.long v7wbi_tlb_fns
.long v6_user_fns
.long v7_cache_fns
@ -407,12 +433,14 @@ __v7_ca9mp_proc_info:
/*
* Marvell PJ4B processor.
*/
#ifdef CONFIG_CPU_PJ4B
.type __v7_pj4b_proc_info, #object
__v7_pj4b_proc_info:
.long 0x562f5840
.long 0xfffffff0
__v7_proc __v7_pj4b_setup
.long 0x560f5800
.long 0xff0fff00
__v7_proc __v7_pj4b_setup, proc_fns = pj4b_processor_functions
.size __v7_pj4b_proc_info, . - __v7_pj4b_proc_info
#endif
/*
* ARM Ltd. Cortex A7 processor.

1
arch/arm64/kernel/perf_event.c
View File

@ -1336,6 +1336,7 @@ void perf_callchain_user(struct perf_callchain_entry *entry,
return;
}
perf_callchain_store(entry, regs->pc);
tail = (struct frame_tail __user *)regs->regs[29];
while (entry->nr < PERF_MAX_STACK_DEPTH &&

1
arch/ia64/include/asm/irqflags.h
View File

@ -11,6 +11,7 @@
#define _ASM_IA64_IRQFLAGS_H
#include <asm/pal.h>
#include <asm/kregs.h>
#ifdef CONFIG_IA64_DEBUG_IRQ
extern unsigned long last_cli_ip;

1
arch/metag/include/asm/hugetlb.h
View File

@ -2,6 +2,7 @@
#define _ASM_METAG_HUGETLB_H
#include <asm/page.h>
#include <asm-generic/hugetlb.h>
static inline int is_hugepage_only_range(struct mm_struct *mm,

5
arch/mn10300/include/asm/irqflags.h
View File

@ -13,9 +13,8 @@
#define _ASM_IRQFLAGS_H
#include <asm/cpu-regs.h>
#ifndef __ASSEMBLY__
#include <linux/smp.h>
#endif
/* linux/smp.h <- linux/irqflags.h needs asm/smp.h first */
#include <asm/smp.h>
/*
* interrupt control

4
arch/mn10300/include/asm/smp.h
View File

@ -24,6 +24,7 @@
#ifndef __ASSEMBLY__
#include <linux/threads.h>
#include <linux/cpumask.h>
#include <linux/thread_info.h>
#endif
#ifdef CONFIG_SMP
@ -85,7 +86,7 @@ extern cpumask_t cpu_boot_map;
extern void smp_init_cpus(void);
extern void smp_cache_interrupt(void);
extern void send_IPI_allbutself(int irq);
extern int smp_nmi_call_function(smp_call_func_t func, void *info, int wait);
extern int smp_nmi_call_function(void (*func)(void *), void *info, int wait);
extern void arch_send_call_function_single_ipi(int cpu);
extern void arch_send_call_function_ipi_mask(const struct cpumask *mask);
@ -100,6 +101,7 @@ extern void __cpu_die(unsigned int cpu);
#ifndef __ASSEMBLY__
static inline void smp_init_cpus(void) {}
#define raw_smp_processor_id() 0
#endif /* __ASSEMBLY__ */
#endif /* CONFIG_SMP */

2
arch/mn10300/include/asm/uaccess.h
View File

@ -161,7 +161,7 @@ struct __large_struct { unsigned long buf[100]; };
#define __get_user_check(x, ptr, size) \
({ \
const __typeof__(ptr) __guc_ptr = (ptr); \
const __typeof__(*(ptr))* __guc_ptr = (ptr); \
int _e; \
if (likely(__access_ok((unsigned long) __guc_ptr, (size)))) \
_e = __get_user_nocheck((x), __guc_ptr, (size)); \

54
arch/mn10300/kernel/setup.c
View File

@ -38,6 +38,7 @@ struct mn10300_cpuinfo boot_cpu_data;
/* For PCI or other memory-mapped resources */
unsigned long pci_mem_start = 0x18000000;
static char __initdata cmd_line[COMMAND_LINE_SIZE];
char redboot_command_line[COMMAND_LINE_SIZE] =
"console=ttyS0,115200 root=/dev/mtdblock3 rw";
@ -74,45 +75,19 @@ static const char *const mn10300_cputypes[] = {
};
/*
*
* Pick out the memory size. We look for mem=size,
* where size is "size[KkMm]"
*/
static void __init parse_mem_cmdline(char **cmdline_p)
static int __init early_mem(char *p)
{
char *from, *to, c;
/* save unparsed command line copy for /proc/cmdline */
strcpy(boot_command_line, redboot_command_line);
/* see if there's an explicit memory size option */
from = redboot_command_line;
to = redboot_command_line;
c = ' ';
for (;;) {
if (c == ' ' && !memcmp(from, "mem=", 4)) {
if (to != redboot_command_line)
to--;
memory_size = memparse(from + 4, &from);
}
c = *(from++);
if (!c)
break;
*(to++) = c;
}
*to = '\0';
*cmdline_p = redboot_command_line;
memory_size = memparse(p, &p);
if (memory_size == 0)
panic("Memory size not known\n");
memory_end = (unsigned long) CONFIG_KERNEL_RAM_BASE_ADDRESS +
memory_size;
if (memory_end > phys_memory_end)
memory_end = phys_memory_end;
return 0;
}
early_param("mem", early_mem);
/*
* architecture specific setup
@ -125,7 +100,20 @@ void __init setup_arch(char **cmdline_p)
cpu_init();
unit_setup();
smp_init_cpus();
parse_mem_cmdline(cmdline_p);
/* save unparsed command line copy for /proc/cmdline */
strlcpy(boot_command_line, redboot_command_line, COMMAND_LINE_SIZE);
/* populate cmd_line too for later use, preserving boot_command_line */
strlcpy(cmd_line, boot_command_line, COMMAND_LINE_SIZE);
*cmdline_p = cmd_line;
parse_early_param();
memory_end = (unsigned long) CONFIG_KERNEL_RAM_BASE_ADDRESS +
memory_size;
if (memory_end > phys_memory_end)
memory_end = phys_memory_end;
init_mm.start_code = (unsigned long)&_text;
init_mm.end_code = (unsigned long) &_etext;

4
arch/parisc/include/asm/mmzone.h
View File

@ -27,7 +27,7 @@ extern struct node_map_data node_data[];
#define PFNNID_SHIFT (30 - PAGE_SHIFT)
#define PFNNID_MAP_MAX 512 /* support 512GB */
extern unsigned char pfnnid_map[PFNNID_MAP_MAX];
extern signed char pfnnid_map[PFNNID_MAP_MAX];
#ifndef CONFIG_64BIT
#define pfn_is_io(pfn) ((pfn & (0xf0000000UL >> PAGE_SHIFT)) == (0xf0000000UL >> PAGE_SHIFT))
@ -46,7 +46,7 @@ static inline int pfn_to_nid(unsigned long pfn)
i = pfn >> PFNNID_SHIFT;
BUG_ON(i >= ARRAY_SIZE(pfnnid_map));
return (int)pfnnid_map[i];
return pfnnid_map[i];
}
static inline int pfn_valid(int pfn)

5
arch/parisc/include/asm/pci.h
View File

@ -225,4 +225,9 @@ static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel)
return channel ? 15 : 14;
}
#define HAVE_PCI_MMAP
extern int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
enum pci_mmap_state mmap_state, int write_combine);
#endif /* __ASM_PARISC_PCI_H */

1
arch/parisc/kernel/hardware.c
View File

@ -1205,6 +1205,7 @@ static struct hp_hardware hp_hardware_list[] = {
{HPHW_FIO, 0x004, 0x00320, 0x0, "Metheus Frame Buffer"},
{HPHW_FIO, 0x004, 0x00340, 0x0, "BARCO CX4500 VME Grphx Cnsl"},
{HPHW_FIO, 0x004, 0x00360, 0x0, "Hughes TOG VME FDDI"},
{HPHW_FIO, 0x076, 0x000AD, 0x00, "Crestone Peak RS-232"},
{HPHW_IOA, 0x185, 0x0000B, 0x00, "Java BC Summit Port"},
{HPHW_IOA, 0x1FF, 0x0000B, 0x00, "Hitachi Ghostview Summit Port"},
{HPHW_IOA, 0x580, 0x0000B, 0x10, "U2-IOA BC Runway Port"},

72
arch/parisc/kernel/pacache.S
View File

@ -860,7 +860,7 @@ ENTRY(flush_dcache_page_asm)
#endif
ldil L%dcache_stride, %r1
ldw R%dcache_stride(%r1), %r1
ldw R%dcache_stride(%r1), r31
#ifdef CONFIG_64BIT
depdi,z 1, 63-PAGE_SHIFT,1, %r25
@ -868,26 +868,26 @@ ENTRY(flush_dcache_page_asm)
depwi,z 1, 31-PAGE_SHIFT,1, %r25
#endif
add %r28, %r25, %r25
sub %r25, %r1, %r25
sub %r25, r31, %r25
1: fdc,m %r1(%r28)
fdc,m %r1(%r28)
fdc,m %r1(%r28)
fdc,m %r1(%r28)
fdc,m %r1(%r28)
fdc,m %r1(%r28)
fdc,m %r1(%r28)
fdc,m %r1(%r28)
fdc,m %r1(%r28)
fdc,m %r1(%r28)
fdc,m %r1(%r28)
fdc,m %r1(%r28)
fdc,m %r1(%r28)
fdc,m %r1(%r28)
fdc,m %r1(%r28)
1: fdc,m r31(%r28)
fdc,m r31(%r28)
fdc,m r31(%r28)
fdc,m r31(%r28)
fdc,m r31(%r28)
fdc,m r31(%r28)
fdc,m r31(%r28)
fdc,m r31(%r28)
fdc,m r31(%r28)
fdc,m r31(%r28)
fdc,m r31(%r28)
fdc,m r31(%r28)
fdc,m r31(%r28)
fdc,m r31(%r28)
fdc,m r31(%r28)
cmpb,COND(<<) %r28, %r25,1b
fdc,m %r1(%r28)
fdc,m r31(%r28)
sync
@ -936,7 +936,7 @@ ENTRY(flush_icache_page_asm)
#endif
ldil L%icache_stride, %r1
ldw R%icache_stride(%r1), %r1
ldw R%icache_stride(%r1), %r31
#ifdef CONFIG_64BIT
depdi,z 1, 63-PAGE_SHIFT,1, %r25
@ -944,28 +944,28 @@ ENTRY(flush_icache_page_asm)
depwi,z 1, 31-PAGE_SHIFT,1, %r25
#endif
add %r28, %r25, %r25
sub %r25, %r1, %r25
sub %r25, %r31, %r25
/* fic only has the type 26 form on PA1.1, requiring an
* explicit space specification, so use %sr4 */
1: fic,m %r1(%sr4,%r28)
fic,m %r1(%sr4,%r28)
fic,m %r1(%sr4,%r28)
fic,m %r1(%sr4,%r28)
fic,m %r1(%sr4,%r28)
fic,m %r1(%sr4,%r28)
fic,m %r1(%sr4,%r28)
fic,m %r1(%sr4,%r28)
fic,m %r1(%sr4,%r28)
fic,m %r1(%sr4,%r28)
fic,m %r1(%sr4,%r28)
fic,m %r1(%sr4,%r28)
fic,m %r1(%sr4,%r28)
fic,m %r1(%sr4,%r28)
fic,m %r1(%sr4,%r28)
1: fic,m %r31(%sr4,%r28)
fic,m %r31(%sr4,%r28)
fic,m %r31(%sr4,%r28)
fic,m %r31(%sr4,%r28)
fic,m %r31(%sr4,%r28)
fic,m %r31(%sr4,%r28)
fic,m %r31(%sr4,%r28)
fic,m %r31(%sr4,%r28)
fic,m %r31(%sr4,%r28)
fic,m %r31(%sr4,%r28)
fic,m %r31(%sr4,%r28)
fic,m %r31(%sr4,%r28)
fic,m %r31(%sr4,%r28)
fic,m %r31(%sr4,%r28)
fic,m %r31(%sr4,%r28)
cmpb,COND(<<) %r28, %r25,1b
fic,m %r1(%sr4,%r28)
fic,m %r31(%sr4,%r28)
sync

27
arch/parisc/kernel/pci.c
View File

@ -220,6 +220,33 @@ resource_size_t pcibios_align_resource(void *data, const struct resource *res,
}
int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
enum pci_mmap_state mmap_state, int write_combine)
{
unsigned long prot;
/*
* I/O space can be accessed via normal processor loads and stores on
* this platform but for now we elect not to do this and portable
* drivers should not do this anyway.
*/
if (mmap_state == pci_mmap_io)
return -EINVAL;
if (write_combine)
return -EINVAL;
/*
* Ignore write-combine; for now only return uncached mappings.
*/
prot = pgprot_val(vma->vm_page_prot);
prot |= _PAGE_NO_CACHE;
vma->vm_page_prot = __pgprot(prot);
return remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff,
vma->vm_end - vma->vm_start, vma->vm_page_prot);
}
/*
* A driver is enabling the device. We make sure that all the appropriate
* bits are set to allow the device to operate as the driver is expecting.

2
arch/parisc/mm/init.c
View File

@ -47,7 +47,7 @@ pte_t pg0[PT_INITIAL * PTRS_PER_PTE] __attribute__ ((__section__ (".data..vm0.pt
#ifdef CONFIG_DISCONTIGMEM
struct node_map_data node_data[MAX_NUMNODES] __read_mostly;
unsigned char pfnnid_map[PFNNID_MAP_MAX] __read_mostly;
signed char pfnnid_map[PFNNID_MAP_MAX] __read_mostly;
#endif
static struct resource data_resource = {

17
arch/powerpc/kernel/pci-common.c
View File

@ -994,7 +994,7 @@ void pcibios_setup_bus_self(struct pci_bus *bus)
ppc_md.pci_dma_bus_setup(bus);
}
void pcibios_setup_device(struct pci_dev *dev)
static void pcibios_setup_device(struct pci_dev *dev)
{
/* Fixup NUMA node as it may not be setup yet by the generic
* code and is needed by the DMA init
@ -1015,6 +1015,17 @@ void pcibios_setup_device(struct pci_dev *dev)
ppc_md.pci_irq_fixup(dev);
}
int pcibios_add_device(struct pci_dev *dev)
{
/*
* We can only call pcibios_setup_device() after bus setup is complete,
* since some of the platform specific DMA setup code depends on it.
*/
if (dev->bus->is_added)
pcibios_setup_device(dev);
return 0;
}
void pcibios_setup_bus_devices(struct pci_bus *bus)
{
struct pci_dev *dev;
@ -1469,10 +1480,6 @@ int pcibios_enable_device(struct pci_dev *dev, int mask)
if (ppc_md.pcibios_enable_device_hook(dev))
return -EINVAL;
/* avoid pcie irq fix up impact on cardbus */
if (dev->hdr_type != PCI_HEADER_TYPE_CARDBUS)
pcibios_setup_device(dev);
return pci_enable_resources(dev, mask);
}

3
arch/powerpc/kvm/booke.c
View File

@ -673,7 +673,6 @@ int kvmppc_vcpu_run(struct kvm_run *kvm_run, struct kvm_vcpu *vcpu)
ret = s;
goto out;
}
kvmppc_lazy_ee_enable();
kvm_guest_enter();
@ -699,6 +698,8 @@ int kvmppc_vcpu_run(struct kvm_run *kvm_run, struct kvm_vcpu *vcpu)
kvmppc_load_guest_fp(vcpu);
#endif
kvmppc_lazy_ee_enable();
ret = __kvmppc_vcpu_run(kvm_run, vcpu);
/* No need for kvm_guest_exit. It's done in handle_exit.

8
arch/powerpc/mm/hugetlbpage.c
View File

@ -592,8 +592,14 @@ static void hugetlb_free_pmd_range(struct mmu_gather *tlb, pud_t *pud,
do {
pmd = pmd_offset(pud, addr);
next = pmd_addr_end(addr, end);
if (pmd_none_or_clear_bad(pmd))
if (!is_hugepd(pmd)) {
/*
* if it is not hugepd pointer, we should already find
* it cleared.
*/
WARN_ON(!pmd_none_or_clear_bad(pmd));
continue;
}
#ifdef CONFIG_PPC_FSL_BOOK3E
/*
* Increment next by the size of the huge mapping since

4
arch/powerpc/platforms/pseries/eeh_cache.c
View File

@ -294,8 +294,6 @@ void __init eeh_addr_cache_build(void)
spin_lock_init(&pci_io_addr_cache_root.piar_lock);
for_each_pci_dev(dev) {
eeh_addr_cache_insert_dev(dev);
dn = pci_device_to_OF_node(dev);
if (!dn)
continue;
@ -308,6 +306,8 @@ void __init eeh_addr_cache_build(void)
dev->dev.archdata.edev = edev;
edev->pdev = dev;
eeh_addr_cache_insert_dev(dev);
eeh_sysfs_add_device(dev);
}

3
arch/powerpc/platforms/pseries/eeh_pe.c
View File

@ -639,7 +639,8 @@ struct pci_bus *eeh_pe_bus_get(struct eeh_pe *pe)
if (pe->type & EEH_PE_PHB) {
bus = pe->phb->bus;
} else if (pe->type & EEH_PE_BUS) {
} else if (pe->type & EEH_PE_BUS ||
pe->type & EEH_PE_DEVICE) {
edev = list_first_entry(&pe->edevs, struct eeh_dev, list);
pdev = eeh_dev_to_pci_dev(edev);
if (pdev)

24
arch/powerpc/sysdev/fsl_pci.c
View File

@ -97,22 +97,14 @@ static int fsl_indirect_read_config(struct pci_bus *bus, unsigned int devfn,
return indirect_read_config(bus, devfn, offset, len, val);
}
static struct pci_ops fsl_indirect_pci_ops =
#if defined(CONFIG_FSL_SOC_BOOKE) || defined(CONFIG_PPC_86xx)
static struct pci_ops fsl_indirect_pcie_ops =
{
.read = fsl_indirect_read_config,
.write = indirect_write_config,
};
static void __init fsl_setup_indirect_pci(struct pci_controller* hose,
resource_size_t cfg_addr,
resource_size_t cfg_data, u32 flags)
{
setup_indirect_pci(hose, cfg_addr, cfg_data, flags);
hose->ops = &fsl_indirect_pci_ops;
}
#if defined(CONFIG_FSL_SOC_BOOKE) || defined(CONFIG_PPC_86xx)
#define MAX_PHYS_ADDR_BITS 40
static u64 pci64_dma_offset = 1ull << MAX_PHYS_ADDR_BITS;
@ -504,13 +496,15 @@ int __init fsl_add_bridge(struct platform_device *pdev, int is_primary)
if (!hose->private_data)
goto no_bridge;
fsl_setup_indirect_pci(hose, rsrc.start, rsrc.start + 0x4,
PPC_INDIRECT_TYPE_BIG_ENDIAN);
setup_indirect_pci(hose, rsrc.start, rsrc.start + 0x4,
PPC_INDIRECT_TYPE_BIG_ENDIAN);
if (in_be32(&pci->block_rev1) < PCIE_IP_REV_3_0)
hose->indirect_type |= PPC_INDIRECT_TYPE_FSL_CFG_REG_LINK;
if (early_find_capability(hose, 0, 0, PCI_CAP_ID_EXP)) {
/* use fsl_indirect_read_config for PCIe */
hose->ops = &fsl_indirect_pcie_ops;
/* For PCIE read HEADER_TYPE to identify controler mode */
early_read_config_byte(hose, 0, 0, PCI_HEADER_TYPE, &hdr_type);
if ((hdr_type & 0x7f) != PCI_HEADER_TYPE_BRIDGE)
@ -814,8 +808,8 @@ int __init mpc83xx_add_bridge(struct device_node *dev)
if (ret)
goto err0;
} else {
fsl_setup_indirect_pci(hose, rsrc_cfg.start,
rsrc_cfg.start + 4, 0);
setup_indirect_pci(hose, rsrc_cfg.start,
rsrc_cfg.start + 4, 0);
}
printk(KERN_INFO "Found FSL PCI host bridge at 0x%016llx. "

3
arch/s390/include/asm/dma-mapping.h
View File

@ -50,9 +50,10 @@ static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
{
struct dma_map_ops *dma_ops = get_dma_ops(dev);
debug_dma_mapping_error(dev, dma_addr);
if (dma_ops->mapping_error)
return dma_ops->mapping_error(dev, dma_addr);
return (dma_addr == 0UL);
return (dma_addr == DMA_ERROR_CODE);
}
static inline void *dma_alloc_coherent(struct device *dev, size_t size,

8
arch/s390/kernel/ipl.c
View File

@ -754,9 +754,9 @@ static struct bin_attribute sys_reipl_fcp_scp_data_attr = {
.write = reipl_fcp_scpdata_write,
};
DEFINE_IPL_ATTR_RW(reipl_fcp, wwpn, "0x%016llx\n", "%016llx\n",
DEFINE_IPL_ATTR_RW(reipl_fcp, wwpn, "0x%016llx\n", "%llx\n",
reipl_block_fcp->ipl_info.fcp.wwpn);
DEFINE_IPL_ATTR_RW(reipl_fcp, lun, "0x%016llx\n", "%016llx\n",
DEFINE_IPL_ATTR_RW(reipl_fcp, lun, "0x%016llx\n", "%llx\n",
reipl_block_fcp->ipl_info.fcp.lun);
DEFINE_IPL_ATTR_RW(reipl_fcp, bootprog, "%lld\n", "%lld\n",
reipl_block_fcp->ipl_info.fcp.bootprog);
@ -1323,9 +1323,9 @@ static struct shutdown_action __refdata reipl_action = {
/* FCP dump device attributes */
DEFINE_IPL_ATTR_RW(dump_fcp, wwpn, "0x%016llx\n", "%016llx\n",
DEFINE_IPL_ATTR_RW(dump_fcp, wwpn, "0x%016llx\n", "%llx\n",
dump_block_fcp->ipl_info.fcp.wwpn);
DEFINE_IPL_ATTR_RW(dump_fcp, lun, "0x%016llx\n", "%016llx\n",
DEFINE_IPL_ATTR_RW(dump_fcp, lun, "0x%016llx\n", "%llx\n",
dump_block_fcp->ipl_info.fcp.lun);
DEFINE_IPL_ATTR_RW(dump_fcp, bootprog, "%lld\n", "%lld\n",
dump_block_fcp->ipl_info.fcp.bootprog);

2
arch/s390/kernel/irq.c
View File

@ -312,6 +312,7 @@ void measurement_alert_subclass_unregister(void)
}
EXPORT_SYMBOL(measurement_alert_subclass_unregister);
#ifdef CONFIG_SMP
void synchronize_irq(unsigned int irq)
{
/*
@ -320,6 +321,7 @@ void synchronize_irq(unsigned int irq)
*/
}
EXPORT_SYMBOL_GPL(synchronize_irq);
#endif
#ifndef CONFIG_PCI

3
arch/s390/mm/mem_detect.c
View File

@ -123,7 +123,8 @@ void create_mem_hole(struct mem_chunk mem_chunk[], unsigned long addr,
continue;
} else if ((addr <= chunk->addr) &&
(addr + size >= chunk->addr + chunk->size)) {
memset(chunk, 0 , sizeof(*chunk));
memmove(chunk, chunk + 1, (MEMORY_CHUNKS-i-1) * sizeof(*chunk));
memset(&mem_chunk[MEMORY_CHUNKS-1], 0, sizeof(*chunk));
} else if (addr + size < chunk->addr + chunk->size) {
chunk->size = chunk->addr + chunk->size - addr - size;
chunk->addr = addr + size;

1
arch/sparc/include/asm/Kbuild
View File

@ -6,6 +6,7 @@ generic-y += cputime.h
generic-y += div64.h
generic-y += emergency-restart.h
generic-y += exec.h
generic-y += linkage.h
generic-y += local64.h
generic-y += mutex.h
generic-y += irq_regs.h

2
arch/sparc/include/asm/leon.h
View File

@ -135,7 +135,7 @@ static inline int sparc_leon3_cpuid(void)
#ifdef CONFIG_SMP
# define LEON3_IRQ_IPI_DEFAULT 13
# define LEON3_IRQ_TICKER (leon3_ticker_irq)
# define LEON3_IRQ_TICKER (leon3_gptimer_irq)
# define LEON3_IRQ_CROSS_CALL 15
#endif

1
arch/sparc/include/asm/leon_amba.h
View File

@ -47,6 +47,7 @@ struct amba_prom_registers {
#define LEON3_GPTIMER_LD 4
#define LEON3_GPTIMER_IRQEN 8
#define LEON3_GPTIMER_SEPIRQ 8
#define LEON3_GPTIMER_TIMERS 0x7
#define LEON23_REG_TIMER_CONTROL_EN 0x00000001 /* 1 = enable counting */
/* 0 = hold scalar and counter */

6
arch/sparc/include/asm/linkage.h
View File

@ -1,6 +0,0 @@
#ifndef __ASM_LINKAGE_H
#define __ASM_LINKAGE_H
/* Nothing to see here... */
#endif

3
arch/sparc/kernel/ds.c
View File

@ -843,7 +843,8 @@ void ldom_reboot(const char *boot_command)
unsigned long len;
strcpy(full_boot_str, "boot ");
strcpy(full_boot_str + strlen("boot "), boot_command);
strlcpy(full_boot_str + strlen("boot "), boot_command,
sizeof(full_boot_str + strlen("boot ")));
len = strlen(full_boot_str);
if (reboot_data_supported) {

68
arch/sparc/kernel/leon_kernel.c
View File

@ -38,7 +38,6 @@ static DEFINE_SPINLOCK(leon_irq_lock);
unsigned long leon3_gptimer_irq; /* interrupt controller irq number */
unsigned long leon3_gptimer_idx; /* Timer Index (0..6) within Timer Core */
int leon3_ticker_irq; /* Timer ticker IRQ */
unsigned int sparc_leon_eirq;
#define LEON_IMASK(cpu) (&leon3_irqctrl_regs->mask[cpu])
#define LEON_IACK (&leon3_irqctrl_regs->iclear)
@ -278,6 +277,9 @@ irqreturn_t leon_percpu_timer_ce_interrupt(int irq, void *unused)
leon_clear_profile_irq(cpu);
if (cpu == boot_cpu_id)
timer_interrupt(irq, NULL);
ce = &per_cpu(sparc32_clockevent, cpu);
irq_enter();
@ -299,6 +301,7 @@ void __init leon_init_timers(void)
int icsel;
int ampopts;
int err;
u32 config;
sparc_config.get_cycles_offset = leon_cycles_offset;
sparc_config.cs_period = 1000000 / HZ;
@ -377,23 +380,6 @@ void __init leon_init_timers(void)
LEON3_BYPASS_STORE_PA(
&leon3_gptimer_regs->e[leon3_gptimer_idx].ctrl, 0);
#ifdef CONFIG_SMP
leon3_ticker_irq = leon3_gptimer_irq + 1 + leon3_gptimer_idx;
if (!(LEON3_BYPASS_LOAD_PA(&leon3_gptimer_regs->config) &
(1<<LEON3_GPTIMER_SEPIRQ))) {
printk(KERN_ERR "timer not configured with separate irqs\n");
BUG();
}
LEON3_BYPASS_STORE_PA(&leon3_gptimer_regs->e[leon3_gptimer_idx+1].val,
0);
LEON3_BYPASS_STORE_PA(&leon3_gptimer_regs->e[leon3_gptimer_idx+1].rld,
(((1000000/HZ) - 1)));
LEON3_BYPASS_STORE_PA(&leon3_gptimer_regs->e[leon3_gptimer_idx+1].ctrl,
0);
#endif
/*
* The IRQ controller may (if implemented) consist of multiple
* IRQ controllers, each mapped on a 4Kb boundary.
@ -416,13 +402,6 @@ void __init leon_init_timers(void)
if (eirq != 0)
leon_eirq_setup(eirq);
irq = _leon_build_device_irq(NULL, leon3_gptimer_irq+leon3_gptimer_idx);
err = request_irq(irq, timer_interrupt, IRQF_TIMER, "timer", NULL);
if (err) {
printk(KERN_ERR "unable to attach timer IRQ%d\n", irq);
prom_halt();
}
#ifdef CONFIG_SMP
{
unsigned long flags;
@ -439,30 +418,31 @@ void __init leon_init_timers(void)
}
#endif
config = LEON3_BYPASS_LOAD_PA(&leon3_gptimer_regs->config);
if (config & (1 << LEON3_GPTIMER_SEPIRQ))
leon3_gptimer_irq += leon3_gptimer_idx;
else if ((config & LEON3_GPTIMER_TIMERS) > 1)
pr_warn("GPTIMER uses shared irqs, using other timers of the same core will fail.\n");
#ifdef CONFIG_SMP
/* Install per-cpu IRQ handler for broadcasted ticker */
irq = leon_build_device_irq(leon3_gptimer_irq, handle_percpu_irq,
"per-cpu", 0);
err = request_irq(irq, leon_percpu_timer_ce_interrupt,
IRQF_PERCPU | IRQF_TIMER, "timer", NULL);
#else
irq = _leon_build_device_irq(NULL, leon3_gptimer_irq);
err = request_irq(irq, timer_interrupt, IRQF_TIMER, "timer", NULL);
#endif
if (err) {
pr_err("Unable to attach timer IRQ%d\n", irq);
prom_halt();
}
LEON3_BYPASS_STORE_PA(&leon3_gptimer_regs->e[leon3_gptimer_idx].ctrl,
LEON3_GPTIMER_EN |
LEON3_GPTIMER_RL |
LEON3_GPTIMER_LD |
LEON3_GPTIMER_IRQEN);
#ifdef CONFIG_SMP
/* Install per-cpu IRQ handler for broadcasted ticker */
irq = leon_build_device_irq(leon3_ticker_irq, handle_percpu_irq,
"per-cpu", 0);
err = request_irq(irq, leon_percpu_timer_ce_interrupt,
IRQF_PERCPU | IRQF_TIMER, "ticker",
NULL);
if (err) {
printk(KERN_ERR "unable to attach ticker IRQ%d\n", irq);
prom_halt();
}
LEON3_BYPASS_STORE_PA(&leon3_gptimer_regs->e[leon3_gptimer_idx+1].ctrl,
LEON3_GPTIMER_EN |
LEON3_GPTIMER_RL |
LEON3_GPTIMER_LD |
LEON3_GPTIMER_IRQEN);
#endif
return;
bad:
printk(KERN_ERR "No Timer/irqctrl found\n");

8
arch/sparc/kernel/leon_pci_grpci1.c
View File

@ -536,11 +536,9 @@ static int grpci1_of_probe(struct platform_device *ofdev)
/* find device register base address */
res = platform_get_resource(ofdev, IORESOURCE_MEM, 0);
regs = devm_request_and_ioremap(&ofdev->dev, res);
if (!regs) {
dev_err(&ofdev->dev, "io-regs mapping failed\n");
return -EADDRNOTAVAIL;
}
regs = devm_ioremap_resource(&ofdev->dev, res);
if (IS_ERR(regs))
return PTR_ERR(regs);
/*
* check that we're in Host Slot and that we can act as a Host Bridge

7
arch/sparc/kernel/leon_pmc.c
View File

@ -47,6 +47,10 @@ void pmc_leon_idle_fixup(void)
* MMU does not get a TLB miss here by using the MMU BYPASS ASI.
*/
register unsigned int address = (unsigned int)leon3_irqctrl_regs;
/* Interrupts need to be enabled to not hang the CPU */
local_irq_enable();
__asm__ __volatile__ (
"wr %%g0, %%asr19\n"
"lda [%0] %1, %%g0\n"
@ -60,6 +64,9 @@ void pmc_leon_idle_fixup(void)
*/
void pmc_leon_idle(void)
{
/* Interrupts need to be enabled to not hang the CPU */
local_irq_enable();
/* For systems without power-down, this will be no-op */
__asm__ __volatile__ ("wr %g0, %asr19\n\t");
}

2
arch/sparc/kernel/setup_32.c
View File

@ -304,7 +304,7 @@ void __init setup_arch(char **cmdline_p)
/* Initialize PROM console and command line. */
*cmdline_p = prom_getbootargs();
strcpy(boot_command_line, *cmdline_p);
strlcpy(boot_command_line, *cmdline_p, COMMAND_LINE_SIZE);
parse_early_param();
boot_flags_init(*cmdline_p);

2
arch/sparc/kernel/setup_64.c
View File

@ -555,7 +555,7 @@ void __init setup_arch(char **cmdline_p)
{
/* Initialize PROM console and command line. */
*cmdline_p = prom_getbootargs();
strcpy(boot_command_line, *cmdline_p);
strlcpy(boot_command_line, *cmdline_p, COMMAND_LINE_SIZE);
parse_early_param();
boot_flags_init(*cmdline_p);

9
arch/sparc/mm/init_64.c
View File

@ -1098,7 +1098,14 @@ static int __init grab_mblocks(struct mdesc_handle *md)
m->size = *val;
val = mdesc_get_property(md, node,
"address-congruence-offset", NULL);
m->offset = *val;
/* The address-congruence-offset property is optional.
* Explicity zero it be identifty this.
*/
if (val)
m->offset = *val;
else
m->offset = 0UL;
numadbg("MBLOCK[%d]: base[%llx] size[%llx] offset[%llx]\n",
count - 1, m->base, m->size, m->offset);

2
arch/sparc/mm/tlb.c
View File

@ -85,8 +85,8 @@ static void tlb_batch_add_one(struct mm_struct *mm, unsigned long vaddr,
}
if (!tb->active) {
global_flush_tlb_page(mm, vaddr);
flush_tsb_user_page(mm, vaddr);
global_flush_tlb_page(mm, vaddr);
goto out;
}

12
arch/sparc/prom/bootstr_32.c
View File

@ -23,23 +23,25 @@ prom_getbootargs(void)
return barg_buf;
}
switch(prom_vers) {
switch (prom_vers) {
case PROM_V0:
cp = barg_buf;
/* Start from 1 and go over fd(0,0,0)kernel */
for(iter = 1; iter < 8; iter++) {
for (iter = 1; iter < 8; iter++) {
arg = (*(romvec->pv_v0bootargs))->argv[iter];
if (arg == NULL)
break;
while(*arg != 0) {
while (*arg != 0) {
/* Leave place for space and null. */
if(cp >= barg_buf + BARG_LEN-2){
if (cp >= barg_buf + BARG_LEN - 2)
/* We might issue a warning here. */
break;
}
*cp++ = *arg++;
}
*cp++ = ' ';
if (cp >= barg_buf + BARG_LEN - 1)
/* We might issue a warning here. */
break;
}
*cp = 0;
break;

16
arch/sparc/prom/tree_64.c
View File

@ -39,7 +39,7 @@ inline phandle __prom_getchild(phandle node)
return prom_node_to_node("child", node);
}
inline phandle prom_getchild(phandle node)
phandle prom_getchild(phandle node)
{
phandle cnode;
@ -72,7 +72,7 @@ inline phandle __prom_getsibling(phandle node)
return prom_node_to_node(prom_peer_name, node);
}
inline phandle prom_getsibling(phandle node)
phandle prom_getsibling(phandle node)
{
phandle sibnode;
@ -89,7 +89,7 @@ EXPORT_SYMBOL(prom_getsibling);
/* Return the length in bytes of property 'prop' at node 'node'.
* Return -1 on error.
*/
inline int prom_getproplen(phandle node, const char *prop)
int prom_getproplen(phandle node, const char *prop)
{
unsigned long args[6];
@ -113,8 +113,8 @@ EXPORT_SYMBOL(prom_getproplen);
* 'buffer' which has a size of 'bufsize'. If the acquisition
* was successful the length will be returned, else -1 is returned.
*/
inline int prom_getproperty(phandle node, const char *prop,
char *buffer, int bufsize)
int prom_getproperty(phandle node, const char *prop,
char *buffer, int bufsize)
{
unsigned long args[8];
int plen;
@ -141,7 +141,7 @@ EXPORT_SYMBOL(prom_getproperty);
/* Acquire an integer property and return its value. Returns -1
* on failure.
*/
inline int prom_getint(phandle node, const char *prop)
int prom_getint(phandle node, const char *prop)
{
int intprop;
@ -235,7 +235,7 @@ static const char *prom_nextprop_name = "nextprop";
/* Return the first property type for node 'node'.
* buffer should be at least 32B in length
*/
inline char *prom_firstprop(phandle node, char *buffer)
char *prom_firstprop(phandle node, char *buffer)
{
unsigned long args[7];
@ -261,7 +261,7 @@ EXPORT_SYMBOL(prom_firstprop);
* at node 'node' . Returns NULL string if no more
* property types for this node.
*/
inline char *prom_nextprop(phandle node, const char *oprop, char *buffer)
char *prom_nextprop(phandle node, const char *oprop, char *buffer)
{
unsigned long args[7];
char buf[32];

2
arch/tile/lib/exports.c
View File

@ -84,4 +84,6 @@ uint64_t __ashrdi3(uint64_t, unsigned int);
EXPORT_SYMBOL(__ashrdi3);
uint64_t __ashldi3(uint64_t, unsigned int);
EXPORT_SYMBOL(__ashldi3);
int __ffsdi2(uint64_t);
EXPORT_SYMBOL(__ffsdi2);
#endif

2
arch/um/drivers/mconsole_kern.c
View File

@ -147,7 +147,7 @@ void mconsole_proc(struct mc_request *req)
}
do {
loff_t pos;
loff_t pos = file->f_pos;
mm_segment_t old_fs = get_fs();
set_fs(KERNEL_DS);
len = vfs_read(file, buf, PAGE_SIZE - 1, &pos);

1
arch/x86/Kconfig
View File

@ -2265,6 +2265,7 @@ source "fs/Kconfig.binfmt"
config IA32_EMULATION
bool "IA32 Emulation"
depends on X86_64
select BINFMT_ELF
select COMPAT_BINFMT_ELF
select HAVE_UID16
---help---

48
arch/x86/crypto/aesni-intel_asm.S
View File

@ -2681,56 +2681,68 @@ ENTRY(aesni_xts_crypt8)
addq %rcx, KEYP
movdqa IV, STATE1
pxor 0x00(INP), STATE1
movdqu 0x00(INP), INC
pxor INC, STATE1
movdqu IV, 0x00(OUTP)
_aesni_gf128mul_x_ble()
movdqa IV, STATE2
pxor 0x10(INP), STATE2
movdqu 0x10(INP), INC
pxor INC, STATE2
movdqu IV, 0x10(OUTP)
_aesni_gf128mul_x_ble()
movdqa IV, STATE3
pxor 0x20(INP), STATE3
movdqu 0x20(INP), INC
pxor INC, STATE3
movdqu IV, 0x20(OUTP)
_aesni_gf128mul_x_ble()
movdqa IV, STATE4
pxor 0x30(INP), STATE4
movdqu 0x30(INP), INC
pxor INC, STATE4
movdqu IV, 0x30(OUTP)
call *%r11
pxor 0x00(OUTP), STATE1
movdqu 0x00(OUTP), INC
pxor INC, STATE1
movdqu STATE1, 0x00(OUTP)
_aesni_gf128mul_x_ble()
movdqa IV, STATE1
pxor 0x40(INP), STATE1
movdqu 0x40(INP), INC
pxor INC, STATE1
movdqu IV, 0x40(OUTP)
pxor 0x10(OUTP), STATE2
movdqu 0x10(OUTP), INC
pxor INC, STATE2
movdqu STATE2, 0x10(OUTP)
_aesni_gf128mul_x_ble()
movdqa IV, STATE2
pxor 0x50(INP), STATE2
movdqu 0x50(INP), INC
pxor INC, STATE2
movdqu IV, 0x50(OUTP)
pxor 0x20(OUTP), STATE3
movdqu 0x20(OUTP), INC
pxor INC, STATE3
movdqu STATE3, 0x20(OUTP)
_aesni_gf128mul_x_ble()
movdqa IV, STATE3
pxor 0x60(INP), STATE3
movdqu 0x60(INP), INC
pxor INC, STATE3
movdqu IV, 0x60(OUTP)
pxor 0x30(OUTP), STATE4
movdqu 0x30(OUTP), INC
pxor INC, STATE4
movdqu STATE4, 0x30(OUTP)
_aesni_gf128mul_x_ble()
movdqa IV, STATE4
pxor 0x70(INP), STATE4
movdqu 0x70(INP), INC
pxor INC, STATE4
movdqu IV, 0x70(OUTP)
_aesni_gf128mul_x_ble()
@ -2738,16 +2750,20 @@ ENTRY(aesni_xts_crypt8)
call *%r11
pxor 0x40(OUTP), STATE1
movdqu 0x40(OUTP), INC
pxor INC, STATE1
movdqu STATE1, 0x40(OUTP)
pxor 0x50(OUTP), STATE2
movdqu 0x50(OUTP), INC
pxor INC, STATE2
movdqu STATE2, 0x50(OUTP)
pxor 0x60(OUTP), STATE3
movdqu 0x60(OUTP), INC
pxor INC, STATE3
movdqu STATE3, 0x60(OUTP)
pxor 0x70(OUTP), STATE4
movdqu 0x70(OUTP), INC
pxor INC, STATE4
movdqu STATE4, 0x70(OUTP)
ret

2
arch/x86/ia32/ia32_aout.c
View File

@ -192,7 +192,7 @@ static int aout_core_dump(long signr, struct pt_regs *regs, struct file *file,
/* struct user */
DUMP_WRITE(&dump, sizeof(dump));
/* Now dump all of the user data. Include malloced stuff as well */
DUMP_SEEK(PAGE_SIZE);
DUMP_SEEK(PAGE_SIZE - sizeof(dump));
/* now we start writing out the user space info */
set_fs(USER_DS);
/* Dump the data area */

5
arch/x86/include/asm/irq.h
View File

@ -41,4 +41,9 @@ extern int vector_used_by_percpu_irq(unsigned int vector);
extern void init_ISA_irqs(void);
#ifdef CONFIG_X86_LOCAL_APIC
void arch_trigger_all_cpu_backtrace(void);
#define arch_trigger_all_cpu_backtrace arch_trigger_all_cpu_backtrace
#endif
#endif /* _ASM_X86_IRQ_H */

4
arch/x86/include/asm/microcode.h
View File

@ -60,11 +60,11 @@ static inline void __exit exit_amd_microcode(void) {}
#ifdef CONFIG_MICROCODE_EARLY
#define MAX_UCODE_COUNT 128
extern void __init load_ucode_bsp(void);
extern __init void load_ucode_ap(void);
extern void __cpuinit load_ucode_ap(void);
extern int __init save_microcode_in_initrd(void);
#else
static inline void __init load_ucode_bsp(void) {}
static inline __init void load_ucode_ap(void) {}
static inline void __cpuinit load_ucode_ap(void) {}
static inline int __init save_microcode_in_initrd(void)
{
return 0;

4
arch/x86/include/asm/nmi.h
View File

@ -18,9 +18,7 @@ extern int proc_nmi_enabled(struct ctl_table *, int ,
void __user *, size_t *, loff_t *);
extern int unknown_nmi_panic;
void arch_trigger_all_cpu_backtrace(void);
#define arch_trigger_all_cpu_backtrace arch_trigger_all_cpu_backtrace
#endif
#endif /* CONFIG_X86_LOCAL_APIC */
#define NMI_FLAG_FIRST 1

1
arch/x86/kernel/apic/hw_nmi.c
View File

@ -9,6 +9,7 @@
*
*/
#include <asm/apic.h>
#include <asm/nmi.h>
#include <linux/cpumask.h>
#include <linux/kdebug.h>

8
arch/x86/kernel/cpu/mtrr/cleanup.c
View File

@ -714,15 +714,15 @@ int __init mtrr_cleanup(unsigned address_bits)
if (mtrr_tom2)
x_remove_size = (mtrr_tom2 >> PAGE_SHIFT) - x_remove_base;
nr_range = x86_get_mtrr_mem_range(range, 0, x_remove_base, x_remove_size);
/*
* [0, 1M) should always be covered by var mtrr with WB
* and fixed mtrrs should take effect before var mtrr for it:
*/
nr_range = add_range_with_merge(range, RANGE_NUM, nr_range, 0,
nr_range = add_range_with_merge(range, RANGE_NUM, 0, 0,
1ULL<<(20 - PAGE_SHIFT));
/* Sort the ranges: */
sort_range(range, nr_range);
/* add from var mtrr at last */
nr_range = x86_get_mtrr_mem_range(range, nr_range,
x_remove_base, x_remove_size);
range_sums = sum_ranges(range, nr_range);
printk(KERN_INFO "total RAM covered: %ldM\n",

2
arch/x86/kernel/cpu/perf_event_intel.c
View File

@ -165,13 +165,13 @@ static struct extra_reg intel_snb_extra_regs[] __read_mostly = {
INTEL_EVENT_EXTRA_REG(0xb7, MSR_OFFCORE_RSP_0, 0x3f807f8fffull, RSP_0),
INTEL_EVENT_EXTRA_REG(0xbb, MSR_OFFCORE_RSP_1, 0x3f807f8fffull, RSP_1),
INTEL_UEVENT_PEBS_LDLAT_EXTRA_REG(0x01cd),
INTEL_UEVENT_PEBS_LDLAT_EXTRA_REG(0x01cd),
EVENT_EXTRA_END
};
static struct extra_reg intel_snbep_extra_regs[] __read_mostly = {
INTEL_EVENT_EXTRA_REG(0xb7, MSR_OFFCORE_RSP_0, 0x3fffff8fffull, RSP_0),
INTEL_EVENT_EXTRA_REG(0xbb, MSR_OFFCORE_RSP_1, 0x3fffff8fffull, RSP_1),
INTEL_UEVENT_PEBS_LDLAT_EXTRA_REG(0x01cd),
EVENT_EXTRA_END
};

14
arch/x86/kernel/kprobes/core.c
View File

@ -365,10 +365,14 @@ int __kprobes __copy_instruction(u8 *dest, u8 *src)
return insn.length;
}
static void __kprobes arch_copy_kprobe(struct kprobe *p)
static int __kprobes arch_copy_kprobe(struct kprobe *p)
{
int ret;
/* Copy an instruction with recovering if other optprobe modifies it.*/
__copy_instruction(p->ainsn.insn, p->addr);
ret = __copy_instruction(p->ainsn.insn, p->addr);
if (!ret)
return -EINVAL;
/*
* __copy_instruction can modify the displacement of the instruction,
@ -384,6 +388,8 @@ static void __kprobes arch_copy_kprobe(struct kprobe *p)
/* Also, displacement change doesn't affect the first byte */
p->opcode = p->ainsn.insn[0];
return 0;
}
int __kprobes arch_prepare_kprobe(struct kprobe *p)
@ -397,8 +403,8 @@ int __kprobes arch_prepare_kprobe(struct kprobe *p)
p->ainsn.insn = get_insn_slot();
if (!p->ainsn.insn)
return -ENOMEM;
arch_copy_kprobe(p);
return 0;
return arch_copy_kprobe(p);
}
void __kprobes arch_arm_kprobe(struct kprobe *p)

1
arch/x86/kernel/kvmclock.c
View File

@ -242,6 +242,7 @@ void __init kvmclock_init(void)
if (!mem)
return;
hv_clock = __va(mem);
memset(hv_clock, 0, size);
if (kvm_register_clock("boot clock")) {
hv_clock = NULL;

12
arch/x86/kernel/process.c
View File

@ -277,18 +277,6 @@ void exit_idle(void)
}
#endif
void arch_cpu_idle_prepare(void)
{
/*
* If we're the non-boot CPU, nothing set the stack canary up
* for us. CPU0 already has it initialized but no harm in
* doing it again. This is a good place for updating it, as
* we wont ever return from this function (so the invalid
* canaries already on the stack wont ever trigger).
*/
boot_init_stack_canary();
}
void arch_cpu_idle_enter(void)
{
local_touch_nmi();

8
arch/x86/kernel/smpboot.c
View File

@ -372,15 +372,15 @@ static bool __cpuinit match_mc(struct cpuinfo_x86 *c, struct cpuinfo_x86 *o)
void __cpuinit set_cpu_sibling_map(int cpu)
{
bool has_mc = boot_cpu_data.x86_max_cores > 1;
bool has_smt = smp_num_siblings > 1;
bool has_mp = has_smt || boot_cpu_data.x86_max_cores > 1;
struct cpuinfo_x86 *c = &cpu_data(cpu);
struct cpuinfo_x86 *o;
int i;
cpumask_set_cpu(cpu, cpu_sibling_setup_mask);
if (!has_smt && !has_mc) {
if (!has_mp) {
cpumask_set_cpu(cpu, cpu_sibling_mask(cpu));
cpumask_set_cpu(cpu, cpu_llc_shared_mask(cpu));
cpumask_set_cpu(cpu, cpu_core_mask(cpu));
@ -394,7 +394,7 @@ void __cpuinit set_cpu_sibling_map(int cpu)
if ((i == cpu) || (has_smt && match_smt(c, o)))
link_mask(sibling, cpu, i);
if ((i == cpu) || (has_mc && match_llc(c, o)))
if ((i == cpu) || (has_mp && match_llc(c, o)))
link_mask(llc_shared, cpu, i);
}
@ -406,7 +406,7 @@ void __cpuinit set_cpu_sibling_map(int cpu)
for_each_cpu(i, cpu_sibling_setup_mask) {
o = &cpu_data(i);
if ((i == cpu) || (has_mc && match_mc(c, o))) {
if ((i == cpu) || (has_mp && match_mc(c, o))) {
link_mask(core, cpu, i);
/*

5
arch/x86/kvm/x86.c
View File

@ -582,8 +582,6 @@ int __kvm_set_xcr(struct kvm_vcpu *vcpu, u32 index, u64 xcr)
if (index != XCR_XFEATURE_ENABLED_MASK)
return 1;
xcr0 = xcr;
if (kvm_x86_ops->get_cpl(vcpu) != 0)
return 1;
if (!(xcr0 & XSTATE_FP))
return 1;
if ((xcr0 & XSTATE_YMM) && !(xcr0 & XSTATE_SSE))
@ -597,7 +595,8 @@ int __kvm_set_xcr(struct kvm_vcpu *vcpu, u32 index, u64 xcr)
int kvm_set_xcr(struct kvm_vcpu *vcpu, u32 index, u64 xcr)
{
if (__kvm_set_xcr(vcpu, index, xcr)) {
if (kvm_x86_ops->get_cpl(vcpu) != 0 ||
__kvm_set_xcr(vcpu, index, xcr)) {
kvm_inject_gp(vcpu, 0);
return 1;
}

7
arch/x86/platform/efi/efi.c
View File

@ -1069,7 +1069,10 @@ efi_status_t efi_query_variable_store(u32 attributes, unsigned long size)
* that by attempting to use more space than is available.
*/
unsigned long dummy_size = remaining_size + 1024;
void *dummy = kmalloc(dummy_size, GFP_ATOMIC);
void *dummy = kzalloc(dummy_size, GFP_ATOMIC);
if (!dummy)
return EFI_OUT_OF_RESOURCES;
status = efi.set_variable(efi_dummy_name, &EFI_DUMMY_GUID,
EFI_VARIABLE_NON_VOLATILE |
@ -1089,6 +1092,8 @@ efi_status_t efi_query_variable_store(u32 attributes, unsigned long size)
0, dummy);
}
kfree(dummy);
/*
* The runtime code may now have triggered a garbage collection
* run, so check the variable info again

15
crypto/algboss.c
View File

@ -45,10 +45,9 @@ struct cryptomgr_param {
} nu32;
} attrs[CRYPTO_MAX_ATTRS];
char larval[CRYPTO_MAX_ALG_NAME];
char template[CRYPTO_MAX_ALG_NAME];
struct completion *completion;
struct crypto_larval *larval;
u32 otype;
u32 omask;
@ -87,7 +86,8 @@ static int cryptomgr_probe(void *data)
crypto_tmpl_put(tmpl);
out:
complete_all(param->completion);
complete_all(&param->larval->completion);
crypto_alg_put(&param->larval->alg);
kfree(param);
module_put_and_exit(0);
}
@ -187,18 +187,19 @@ static int cryptomgr_schedule_probe(struct crypto_larval *larval)
param->otype = larval->alg.cra_flags;
param->omask = larval->mask;
memcpy(param->larval, larval->alg.cra_name, CRYPTO_MAX_ALG_NAME);
param->completion = &larval->completion;
crypto_alg_get(&larval->alg);
param->larval = larval;
thread = kthread_run(cryptomgr_probe, param, "cryptomgr_probe");
if (IS_ERR(thread))
goto err_free_param;
goto err_put_larval;
wait_for_completion_interruptible(&larval->completion);
return NOTIFY_STOP;
err_put_larval:
crypto_alg_put(&larval->alg);
err_free_param:
kfree(param);
err_put_module:

6
crypto/api.c
View File

@ -34,12 +34,6 @@ EXPORT_SYMBOL_GPL(crypto_alg_sem);
BLOCKING_NOTIFIER_HEAD(crypto_chain);
EXPORT_SYMBOL_GPL(crypto_chain);
static inline struct crypto_alg *crypto_alg_get(struct crypto_alg *alg)
{
atomic_inc(&alg->cra_refcnt);
return alg;
}
struct crypto_alg *crypto_mod_get(struct crypto_alg *alg)
{
return try_module_get(alg->cra_module) ? crypto_alg_get(alg) : NULL;

6
crypto/internal.h
View File

@ -103,6 +103,12 @@ int crypto_register_notifier(struct notifier_block *nb);
int crypto_unregister_notifier(struct notifier_block *nb);
int crypto_probing_notify(unsigned long val, void *v);
static inline struct crypto_alg *crypto_alg_get(struct crypto_alg *alg)
{
atomic_inc(&alg->cra_refcnt);
return alg;
}
static inline void crypto_alg_put(struct crypto_alg *alg)
{
if (atomic_dec_and_test(&alg->cra_refcnt) && alg->cra_destroy)

21
drivers/acpi/acpi_lpss.c
View File

@ -164,15 +164,24 @@ static int acpi_lpss_create_device(struct acpi_device *adev,
if (dev_desc->clk_required) {
ret = register_device_clock(adev, pdata);
if (ret) {
/*
* Skip the device, but don't terminate the namespace
* scan.
*/
kfree(pdata);
return 0;
/* Skip the device, but continue the namespace scan. */
ret = 0;
goto err_out;
}
}
/*
* This works around a known issue in ACPI tables where LPSS devices
* have _PS0 and _PS3 without _PSC (and no power resources), so
* acpi_bus_init_power() will assume that the BIOS has put them into D0.
*/
ret = acpi_device_fix_up_power(adev);
if (ret) {
/* Skip the device, but continue the namespace scan. */
ret = 0;
goto err_out;
}
adev->driver_data = pdata;
ret = acpi_create_platform_device(adev, id);
if (ret > 0)

20
drivers/acpi/device_pm.c
View File

@ -290,6 +290,26 @@ int acpi_bus_init_power(struct acpi_device *device)
return 0;
}
/**
* acpi_device_fix_up_power - Force device with missing _PSC into D0.
* @device: Device object whose power state is to be fixed up.
*
* Devices without power resources and _PSC, but having _PS0 and _PS3 defined,
* are assumed to be put into D0 by the BIOS. However, in some cases that may
* not be the case and this function should be used then.
*/
int acpi_device_fix_up_power(struct acpi_device *device)
{
int ret = 0;
if (!device->power.flags.power_resources
&& !device->power.flags.explicit_get
&& device->power.state == ACPI_STATE_D0)
ret = acpi_dev_pm_explicit_set(device, ACPI_STATE_D0);
return ret;
}
int acpi_bus_update_power(acpi_handle handle, int *state_p)
{
struct acpi_device *device;

181
drivers/acpi/dock.c
View File

@ -66,20 +66,21 @@ struct dock_station {
spinlock_t dd_lock;
struct mutex hp_lock;
struct list_head dependent_devices;
struct list_head hotplug_devices;
struct list_head sibling;
struct platform_device *dock_device;
};
static LIST_HEAD(dock_stations);
static int dock_station_count;
static DEFINE_MUTEX(hotplug_lock);
struct dock_dependent_device {
struct list_head list;
struct list_head hotplug_list;
acpi_handle handle;
const struct acpi_dock_ops *ops;
void *context;
const struct acpi_dock_ops *hp_ops;
void *hp_context;
unsigned int hp_refcount;
void (*hp_release)(void *);
};
#define DOCK_DOCKING 0x00000001
@ -111,7 +112,6 @@ add_dock_dependent_device(struct dock_station *ds, acpi_handle handle)
dd->handle = handle;
INIT_LIST_HEAD(&dd->list);
INIT_LIST_HEAD(&dd->hotplug_list);
spin_lock(&ds->dd_lock);
list_add_tail(&dd->list, &ds->dependent_devices);
@ -121,35 +121,90 @@ add_dock_dependent_device(struct dock_station *ds, acpi_handle handle)
}
/**
* dock_add_hotplug_device - associate a hotplug handler with the dock station
* @ds: The dock station
* @dd: The dependent device struct
*
* Add the dependent device to the dock's hotplug device list
* dock_init_hotplug - Initialize a hotplug device on a docking station.
* @dd: Dock-dependent device.
* @ops: Dock operations to attach to the dependent device.
* @context: Data to pass to the @ops callbacks and @release.
* @init: Optional initialization routine to run after setting up context.
* @release: Optional release routine to run on removal.
*/
static void
dock_add_hotplug_device(struct dock_station *ds,
struct dock_dependent_device *dd)
static int dock_init_hotplug(struct dock_dependent_device *dd,
const struct acpi_dock_ops *ops, void *context,
void (*init)(void *), void (*release)(void *))
{
mutex_lock(&ds->hp_lock);
list_add_tail(&dd->hotplug_list, &ds->hotplug_devices);
mutex_unlock(&ds->hp_lock);
int ret = 0;
mutex_lock(&hotplug_lock);
if (dd->hp_context) {
ret = -EEXIST;
} else {
dd->hp_refcount = 1;
dd->hp_ops = ops;
dd->hp_context = context;
dd->hp_release = release;
}
if (!WARN_ON(ret) && init)
init(context);
mutex_unlock(&hotplug_lock);
return ret;
}
/**
* dock_del_hotplug_device - remove a hotplug handler from the dock station
* @ds: The dock station
* @dd: the dependent device struct
* dock_release_hotplug - Decrement hotplug reference counter of dock device.
* @dd: Dock-dependent device.
*
* Delete the dependent device from the dock's hotplug device list
* Decrement the reference counter of @dd and if 0, detach its hotplug
* operations from it, reset its context pointer and run the optional release
* routine if present.
*/
static void
dock_del_hotplug_device(struct dock_station *ds,
struct dock_dependent_device *dd)
static void dock_release_hotplug(struct dock_dependent_device *dd)
{
mutex_lock(&ds->hp_lock);
list_del(&dd->hotplug_list);
mutex_unlock(&ds->hp_lock);
void (*release)(void *) = NULL;
void *context = NULL;
mutex_lock(&hotplug_lock);
if (dd->hp_context && !--dd->hp_refcount) {
dd->hp_ops = NULL;
context = dd->hp_context;
dd->hp_context = NULL;
release = dd->hp_release;
dd->hp_release = NULL;
}
if (release && context)
release(context);
mutex_unlock(&hotplug_lock);
}
static void dock_hotplug_event(struct dock_dependent_device *dd, u32 event,
bool uevent)
{
acpi_notify_handler cb = NULL;
bool run = false;
mutex_lock(&hotplug_lock);
if (dd->hp_context) {
run = true;
dd->hp_refcount++;
if (dd->hp_ops)
cb = uevent ? dd->hp_ops->uevent : dd->hp_ops->handler;
}
mutex_unlock(&hotplug_lock);
if (!run)
return;
if (cb)
cb(dd->handle, event, dd->hp_context);
dock_release_hotplug(dd);
}
/**
@ -360,9 +415,8 @@ static void hotplug_dock_devices(struct dock_station *ds, u32 event)
/*
* First call driver specific hotplug functions
*/
list_for_each_entry(dd, &ds->hotplug_devices, hotplug_list)
if (dd->ops && dd->ops->handler)
dd->ops->handler(dd->handle, event, dd->context);
list_for_each_entry(dd, &ds->dependent_devices, list)
dock_hotplug_event(dd, event, false);
/*
* Now make sure that an acpi_device is created for each
@ -398,9 +452,8 @@ static void dock_event(struct dock_station *ds, u32 event, int num)
if (num == DOCK_EVENT)
kobject_uevent_env(&dev->kobj, KOBJ_CHANGE, envp);
list_for_each_entry(dd, &ds->hotplug_devices, hotplug_list)
if (dd->ops && dd->ops->uevent)
dd->ops->uevent(dd->handle, event, dd->context);
list_for_each_entry(dd, &ds->dependent_devices, list)
dock_hotplug_event(dd, event, true);
if (num != DOCK_EVENT)
kobject_uevent_env(&dev->kobj, KOBJ_CHANGE, envp);
@ -570,19 +623,24 @@ EXPORT_SYMBOL_GPL(unregister_dock_notifier);
* @handle: the handle of the device
* @ops: handlers to call after docking
* @context: device specific data
* @init: Optional initialization routine to run after registration
* @release: Optional release routine to run on unregistration
*
* If a driver would like to perform a hotplug operation after a dock
* event, they can register an acpi_notifiy_handler to be called by
* the dock driver after _DCK is executed.
*/
int
register_hotplug_dock_device(acpi_handle handle, const struct acpi_dock_ops *ops,
void *context)
int register_hotplug_dock_device(acpi_handle handle,
const struct acpi_dock_ops *ops, void *context,
void (*init)(void *), void (*release)(void *))
{
struct dock_dependent_device *dd;
struct dock_station *dock_station;
int ret = -EINVAL;
if (WARN_ON(!context))
return -EINVAL;
if (!dock_station_count)
return -ENODEV;
@ -597,12 +655,8 @@ register_hotplug_dock_device(acpi_handle handle, const struct acpi_dock_ops *ops
* ops
*/
dd = find_dock_dependent_device(dock_station, handle);
if (dd) {
dd->ops = ops;
dd->context = context;
dock_add_hotplug_device(dock_station, dd);
if (dd && !dock_init_hotplug(dd, ops, context, init, release))
ret = 0;
}
}
return ret;
@ -624,7 +678,7 @@ void unregister_hotplug_dock_device(acpi_handle handle)
list_for_each_entry(dock_station, &dock_stations, sibling) {
dd = find_dock_dependent_device(dock_station, handle);
if (dd)
dock_del_hotplug_device(dock_station, dd);
dock_release_hotplug(dd);
}
}
EXPORT_SYMBOL_GPL(unregister_hotplug_dock_device);
@ -868,8 +922,10 @@ static ssize_t write_undock(struct device *dev, struct device_attribute *attr,
if (!count)
return -EINVAL;
acpi_scan_lock_acquire();
begin_undock(dock_station);
ret = handle_eject_request(dock_station, ACPI_NOTIFY_EJECT_REQUEST);
acpi_scan_lock_release();
return ret ? ret: count;
}
static DEVICE_ATTR(undock, S_IWUSR, NULL, write_undock);
@ -951,7 +1007,6 @@ static int __init dock_add(acpi_handle handle)
mutex_init(&dock_station->hp_lock);
spin_lock_init(&dock_station->dd_lock);
INIT_LIST_HEAD(&dock_station->sibling);
INIT_LIST_HEAD(&dock_station->hotplug_devices);
ATOMIC_INIT_NOTIFIER_HEAD(&dock_notifier_list);
INIT_LIST_HEAD(&dock_station->dependent_devices);
@ -991,30 +1046,6 @@ err_unregister:
return ret;
}
/**
* dock_remove - free up resources related to the dock station
*/
static int dock_remove(struct dock_station *ds)
{
struct dock_dependent_device *dd, *tmp;
struct platform_device *dock_device = ds->dock_device;
if (!dock_station_count)
return 0;
/* remove dependent devices */
list_for_each_entry_safe(dd, tmp, &ds->dependent_devices, list)
kfree(dd);
list_del(&ds->sibling);
/* cleanup sysfs */
sysfs_remove_group(&dock_device->dev.kobj, &dock_attribute_group);
platform_device_unregister(dock_device);
return 0;
}
/**
* find_dock_and_bay - look for dock stations and bays
* @handle: acpi handle of a device
@ -1033,7 +1064,7 @@ find_dock_and_bay(acpi_handle handle, u32 lvl, void *context, void **rv)
return AE_OK;
}
static int __init dock_init(void)
int __init acpi_dock_init(void)
{
if (acpi_disabled)
return 0;
@ -1052,19 +1083,3 @@ static int __init dock_init(void)
ACPI_DOCK_DRIVER_DESCRIPTION, dock_station_count);
return 0;
}
static void __exit dock_exit(void)
{
struct dock_station *tmp, *dock_station;
unregister_acpi_bus_notifier(&dock_acpi_notifier);
list_for_each_entry_safe(dock_station, tmp, &dock_stations, sibling)
dock_remove(dock_station);
}
/*
* Must be called before drivers of devices in dock, otherwise we can't know
* which devices are in a dock
*/
subsys_initcall(dock_init);
module_exit(dock_exit);

5
drivers/acpi/internal.h
View File

@ -40,6 +40,11 @@ void acpi_container_init(void);
#else
static inline void acpi_container_init(void) {}
#endif
#ifdef CONFIG_ACPI_DOCK
void acpi_dock_init(void);
#else
static inline void acpi_dock_init(void) {}
#endif
#ifdef CONFIG_ACPI_HOTPLUG_MEMORY
void acpi_memory_hotplug_init(void);
#else

1
drivers/acpi/power.c
View File

@ -885,6 +885,7 @@ int acpi_add_power_resource(acpi_handle handle)
ACPI_STA_DEFAULT);
mutex_init(&resource->resource_lock);
INIT_LIST_HEAD(&resource->dependent);
INIT_LIST_HEAD(&resource->list_node);
resource->name = device->pnp.bus_id;
strcpy(acpi_device_name(device), ACPI_POWER_DEVICE_NAME);
strcpy(acpi_device_class(device), ACPI_POWER_CLASS);

16
drivers/acpi/resource.c
View File

@ -304,7 +304,8 @@ static void acpi_dev_irqresource_disabled(struct resource *res, u32 gsi)
}
static void acpi_dev_get_irqresource(struct resource *res, u32 gsi,
u8 triggering, u8 polarity, u8 shareable)
u8 triggering, u8 polarity, u8 shareable,
bool legacy)
{
int irq, p, t;
@ -317,14 +318,19 @@ static void acpi_dev_get_irqresource(struct resource *res, u32 gsi,
* In IO-APIC mode, use overrided attribute. Two reasons:
* 1. BIOS bug in DSDT
* 2. BIOS uses IO-APIC mode Interrupt Source Override
*
* We do this only if we are dealing with IRQ() or IRQNoFlags()
* resource (the legacy ISA resources). With modern ACPI 5 devices
* using extended IRQ descriptors we take the IRQ configuration
* from _CRS directly.
*/
if (!acpi_get_override_irq(gsi, &t, &p)) {
if (legacy && !acpi_get_override_irq(gsi, &t, &p)) {
u8 trig = t ? ACPI_LEVEL_SENSITIVE : ACPI_EDGE_SENSITIVE;
u8 pol = p ? ACPI_ACTIVE_LOW : ACPI_ACTIVE_HIGH;
if (triggering != trig || polarity != pol) {
pr_warning("ACPI: IRQ %d override to %s, %s\n", gsi,
t ? "edge" : "level", p ? "low" : "high");
t ? "level" : "edge", p ? "low" : "high");
triggering = trig;
polarity = pol;
}
@ -373,7 +379,7 @@ bool acpi_dev_resource_interrupt(struct acpi_resource *ares, int index,
}
acpi_dev_get_irqresource(res, irq->interrupts[index],
irq->triggering, irq->polarity,
irq->sharable);
irq->sharable, true);
break;
case ACPI_RESOURCE_TYPE_EXTENDED_IRQ:
ext_irq = &ares->data.extended_irq;
@ -383,7 +389,7 @@ bool acpi_dev_resource_interrupt(struct acpi_resource *ares, int index,
}
acpi_dev_get_irqresource(res, ext_irq->interrupts[index],
ext_irq->triggering, ext_irq->polarity,
ext_irq->sharable);
ext_irq->sharable, false);
break;
default:
return false;

1
drivers/acpi/scan.c
View File

@ -2042,6 +2042,7 @@ int __init acpi_scan_init(void)
acpi_lpss_init();
acpi_container_init();
acpi_memory_hotplug_init();
acpi_dock_init();
mutex_lock(&acpi_scan_lock);
/*

37
drivers/ata/libata-acpi.c
View File

@ -156,8 +156,10 @@ static void ata_acpi_handle_hotplug(struct ata_port *ap, struct ata_device *dev,
spin_unlock_irqrestore(ap->lock, flags);
if (wait)
if (wait) {
ata_port_wait_eh(ap);
flush_work(&ap->hotplug_task.work);
}
}
static void ata_acpi_dev_notify_dock(acpi_handle handle, u32 event, void *data)
@ -214,6 +216,39 @@ static const struct acpi_dock_ops ata_acpi_ap_dock_ops = {
.uevent = ata_acpi_ap_uevent,
};
void ata_acpi_hotplug_init(struct ata_host *host)
{
int i;
for (i = 0; i < host->n_ports; i++) {
struct ata_port *ap = host->ports[i];
acpi_handle handle;
struct ata_device *dev;
if (!ap)
continue;
handle = ata_ap_acpi_handle(ap);
if (handle) {
/* we might be on a docking station */
register_hotplug_dock_device(handle,
&ata_acpi_ap_dock_ops, ap,
NULL, NULL);
}
ata_for_each_dev(dev, &ap->link, ALL) {
handle = ata_dev_acpi_handle(dev);
if (!handle)
continue;
/* we might be on a docking station */
register_hotplug_dock_device(handle,
&ata_acpi_dev_dock_ops,
dev, NULL, NULL);
}
}
}
/**
* ata_acpi_dissociate - dissociate ATA host from ACPI objects
* @host: target ATA host

2
drivers/ata/libata-core.c
View File

@ -6148,6 +6148,8 @@ int ata_host_register(struct ata_host *host, struct scsi_host_template *sht)
if (rc)
goto err_tadd;
ata_acpi_hotplug_init(host);
/* set cable, sata_spd_limit and report */
for (i = 0; i < host->n_ports; i++) {
struct ata_port *ap = host->ports[i];

2
drivers/ata/libata.h
View File

@ -122,6 +122,7 @@ extern int ata_acpi_register(void);
extern void ata_acpi_unregister(void);
extern void ata_acpi_bind(struct ata_device *dev);
extern void ata_acpi_unbind(struct ata_device *dev);
extern void ata_acpi_hotplug_init(struct ata_host *host);
#else
static inline void ata_acpi_dissociate(struct ata_host *host) { }
static inline int ata_acpi_on_suspend(struct ata_port *ap) { return 0; }
@ -134,6 +135,7 @@ static inline int ata_acpi_register(void) { return 0; }
static inline void ata_acpi_unregister(void) { }
static inline void ata_acpi_bind(struct ata_device *dev) { }
static inline void ata_acpi_unbind(struct ata_device *dev) { }
static inline void ata_acpi_hotplug_init(struct ata_host *host) {}
#endif
/* libata-scsi.c */

27
drivers/base/firmware_class.c
View File

@ -450,8 +450,18 @@ static void fw_load_abort(struct firmware_priv *fw_priv)
{
struct firmware_buf *buf = fw_priv->buf;
/*
* There is a small window in which user can write to 'loading'
* between loading done and disappearance of 'loading'
*/
if (test_bit(FW_STATUS_DONE, &buf->status))
return;
set_bit(FW_STATUS_ABORT, &buf->status);
complete_all(&buf->completion);
/* avoid user action after loading abort */
fw_priv->buf = NULL;
}
#define is_fw_load_aborted(buf) \
@ -528,7 +538,12 @@ static ssize_t firmware_loading_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct firmware_priv *fw_priv = to_firmware_priv(dev);
int loading = test_bit(FW_STATUS_LOADING, &fw_priv->buf->status);
int loading = 0;
mutex_lock(&fw_lock);
if (fw_priv->buf)
loading = test_bit(FW_STATUS_LOADING, &fw_priv->buf->status);
mutex_unlock(&fw_lock);
return sprintf(buf, "%d\n", loading);
}
@ -570,12 +585,12 @@ static ssize_t firmware_loading_store(struct device *dev,
const char *buf, size_t count)
{
struct firmware_priv *fw_priv = to_firmware_priv(dev);
struct firmware_buf *fw_buf = fw_priv->buf;
struct firmware_buf *fw_buf;
int loading = simple_strtol(buf, NULL, 10);
int i;
mutex_lock(&fw_lock);
fw_buf = fw_priv->buf;
if (!fw_buf)
goto out;
@ -777,10 +792,6 @@ static void firmware_class_timeout_work(struct work_struct *work)
struct firmware_priv, timeout_work.work);
mutex_lock(&fw_lock);
if (test_bit(FW_STATUS_DONE, &(fw_priv->buf->status))) {
mutex_unlock(&fw_lock);
return;
}
fw_load_abort(fw_priv);
mutex_unlock(&fw_lock);
}
@ -861,8 +872,6 @@ static int _request_firmware_load(struct firmware_priv *fw_priv, bool uevent,
cancel_delayed_work_sync(&fw_priv->timeout_work);
fw_priv->buf = NULL;
device_remove_file(f_dev, &dev_attr_loading);
err_del_bin_attr:
device_remove_bin_file(f_dev, &firmware_attr_data);

20
drivers/block/rbd.c
View File

@ -1036,12 +1036,16 @@ static const char *rbd_segment_name(struct rbd_device *rbd_dev, u64 offset)
char *name;
u64 segment;
int ret;
char *name_format;
name = kmem_cache_alloc(rbd_segment_name_cache, GFP_NOIO);
if (!name)
return NULL;
segment = offset >> rbd_dev->header.obj_order;
ret = snprintf(name, MAX_OBJ_NAME_SIZE + 1, "%s.%012llx",
name_format = "%s.%012llx";
if (rbd_dev->image_format == 2)
name_format = "%s.%016llx";
ret = snprintf(name, MAX_OBJ_NAME_SIZE + 1, name_format,
rbd_dev->header.object_prefix, segment);
if (ret < 0 || ret > MAX_OBJ_NAME_SIZE) {
pr_err("error formatting segment name for #%llu (%d)\n",
@ -2248,13 +2252,17 @@ static int rbd_img_request_fill(struct rbd_img_request *img_request,
obj_request->pages, length,
offset & ~PAGE_MASK, false, false);
/*
* set obj_request->img_request before formatting
* the osd_request so that it gets the right snapc
*/
rbd_img_obj_request_add(img_request, obj_request);
if (write_request)
rbd_osd_req_format_write(obj_request);
else
rbd_osd_req_format_read(obj_request);
obj_request->img_offset = img_offset;
rbd_img_obj_request_add(img_request, obj_request);
img_offset += length;
resid -= length;
@ -4239,6 +4247,10 @@ static int rbd_dev_v2_header_info(struct rbd_device *rbd_dev)
down_write(&rbd_dev->header_rwsem);
ret = rbd_dev_v2_image_size(rbd_dev);
if (ret)
goto out;
if (first_time) {
ret = rbd_dev_v2_header_onetime(rbd_dev);
if (ret)
@ -4272,10 +4284,6 @@ static int rbd_dev_v2_header_info(struct rbd_device *rbd_dev)
"is EXPERIMENTAL!");
}
ret = rbd_dev_v2_image_size(rbd_dev);
if (ret)
goto out;
if (rbd_dev->spec->snap_id == CEPH_NOSNAP)
if (rbd_dev->mapping.size != rbd_dev->header.image_size)
rbd_dev->mapping.size = rbd_dev->header.image_size;

1
drivers/clk/clk.c
View File

@ -1955,6 +1955,7 @@ int clk_notifier_unregister(struct clk *clk, struct notifier_block *nb)
/* XXX the notifier code should handle this better */
if (!cn->notifier_head.head) {
srcu_cleanup_notifier_head(&cn->notifier_head);
list_del(&cn->node);
kfree(cn);
}

10
drivers/clk/samsung/clk-exynos5250.c
View File

@ -155,7 +155,7 @@ static __initdata unsigned long exynos5250_clk_regs[] = {
/* list of all parent clock list */
PNAME(mout_apll_p) = { "fin_pll", "fout_apll", };
PNAME(mout_cpu_p) = { "mout_apll", "mout_mpll", };
PNAME(mout_cpu_p) = { "mout_apll", "sclk_mpll", };
PNAME(mout_mpll_fout_p) = { "fout_mplldiv2", "fout_mpll" };
PNAME(mout_mpll_p) = { "fin_pll", "mout_mpll_fout" };
PNAME(mout_bpll_fout_p) = { "fout_bplldiv2", "fout_bpll" };
@ -208,10 +208,10 @@ struct samsung_fixed_factor_clock exynos5250_fixed_factor_clks[] __initdata = {
};
struct samsung_mux_clock exynos5250_mux_clks[] __initdata = {
MUX(none, "mout_apll", mout_apll_p, SRC_CPU, 0, 1),
MUX(none, "mout_cpu", mout_cpu_p, SRC_CPU, 16, 1),
MUX_A(none, "mout_apll", mout_apll_p, SRC_CPU, 0, 1, "mout_apll"),
MUX_A(none, "mout_cpu", mout_cpu_p, SRC_CPU, 16, 1, "mout_cpu"),
MUX(none, "mout_mpll_fout", mout_mpll_fout_p, PLL_DIV2_SEL, 4, 1),
MUX(none, "sclk_mpll", mout_mpll_p, SRC_CORE1, 8, 1),
MUX_A(none, "sclk_mpll", mout_mpll_p, SRC_CORE1, 8, 1, "mout_mpll"),
MUX(none, "mout_bpll_fout", mout_bpll_fout_p, PLL_DIV2_SEL, 0, 1),
MUX(none, "sclk_bpll", mout_bpll_p, SRC_CDREX, 0, 1),
MUX(none, "mout_vpllsrc", mout_vpllsrc_p, SRC_TOP2, 0, 1),
@ -378,7 +378,7 @@ struct samsung_gate_clock exynos5250_gate_clks[] __initdata = {
GATE(hsi2c3, "hsi2c3", "aclk66", GATE_IP_PERIC, 31, 0, 0),
GATE(chipid, "chipid", "aclk66", GATE_IP_PERIS, 0, 0, 0),
GATE(sysreg, "sysreg", "aclk66", GATE_IP_PERIS, 1, 0, 0),
GATE(pmu, "pmu", "aclk66", GATE_IP_PERIS, 2, 0, 0),
GATE(pmu, "pmu", "aclk66", GATE_IP_PERIS, 2, CLK_IGNORE_UNUSED, 0),
GATE(tzpc0, "tzpc0", "aclk66", GATE_IP_PERIS, 6, 0, 0),
GATE(tzpc1, "tzpc1", "aclk66", GATE_IP_PERIS, 7, 0, 0),
GATE(tzpc2, "tzpc2", "aclk66", GATE_IP_PERIS, 8, 0, 0),

5
drivers/clk/samsung/clk-pll.c
View File

@ -111,7 +111,8 @@ static unsigned long samsung_pll36xx_recalc_rate(struct clk_hw *hw,
unsigned long parent_rate)
{
struct samsung_clk_pll36xx *pll = to_clk_pll36xx(hw);
u32 mdiv, pdiv, sdiv, kdiv, pll_con0, pll_con1;
u32 mdiv, pdiv, sdiv, pll_con0, pll_con1;
s16 kdiv;
u64 fvco = parent_rate;
pll_con0 = __raw_readl(pll->con_reg);
@ -119,7 +120,7 @@ static unsigned long samsung_pll36xx_recalc_rate(struct clk_hw *hw,
mdiv = (pll_con0 >> PLL36XX_MDIV_SHIFT) & PLL36XX_MDIV_MASK;
pdiv = (pll_con0 >> PLL36XX_PDIV_SHIFT) & PLL36XX_PDIV_MASK;
sdiv = (pll_con0 >> PLL36XX_SDIV_SHIFT) & PLL36XX_SDIV_MASK;
kdiv = pll_con1 & PLL36XX_KDIV_MASK;
kdiv = (s16)(pll_con1 & PLL36XX_KDIV_MASK);
fvco *= (mdiv << 16) + kdiv;
do_div(fvco, (pdiv << sdiv));

2
drivers/clk/spear/spear3xx_clock.c
View File

@ -369,7 +369,7 @@ static void __init spear320_clk_init(void __iomem *soc_config_base)
clk_register_clkdev(clk, NULL, "60100000.serial");
}
#else
static inline void spear320_clk_init(void) { }
static inline void spear320_clk_init(void __iomem *soc_config_base) { }
#endif
void __init spear3xx_clk_init(void __iomem *misc_base, void __iomem *soc_config_base)

Some files were not shown because too many files have changed in this diff Show More