arm64: dts: qcom: add sm8150 hdk dts
Add initial HDK855 dts, based on sm8150-mtp, with a few changes. Signed-off-by: Jonathan Marek <jonathan@marek.ca> Link: https://lore.kernel.org/r/20200609194030.17756-8-jonathan@marek.ca Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
This commit is contained in:
Jonathan Marek
Bjorn Andersson
parent
46a6f297d7
commit
0ab1b2d10a
|
|
@ -45,5 +45,6 @@ dtb-$(CONFIG_ARCH_QCOM) += sdm845-db845c.dtb
|
|||
dtb-$(CONFIG_ARCH_QCOM) += sdm845-mtp.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += sdm845-xiaomi-beryllium.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += sdm850-lenovo-yoga-c630.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += sm8150-hdk.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += sm8150-mtp.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += sm8250-mtp.dtb
|
||||
|
|
|
|||
|
|
@ -0,0 +1,463 @@
|
|||
// SPDX-License-Identifier: BSD-3-Clause
|
||||
/*
|
||||
* Copyright (c) 2020, The Linux Foundation. All rights reserved.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include "sm8150.dtsi"
|
||||
#include "pm8150.dtsi"
|
||||
#include "pm8150b.dtsi"
|
||||
#include "pm8150l.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Qualcomm Technologies, Inc. SM8150 HDK";
|
||||
compatible = "qcom,sm8150-hdk", "qcom,sm8150";
|
||||
|
||||
aliases {
|
||||
serial0 = &uart2;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
vph_pwr: vph-pwr-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vph_pwr";
|
||||
regulator-min-microvolt = <3700000>;
|
||||
regulator-max-microvolt = <3700000>;
|
||||
};
|
||||
|
||||
vreg_s4a_1p8: pm8150-s4 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vreg_s4a_1p8";
|
||||
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
|
||||
vin-supply = <&vph_pwr>;
|
||||
};
|
||||
|
||||
gpio_keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
vol-up {
|
||||
label = "Volume Up";
|
||||
linux,code = <KEY_VOLUMEUP>;
|
||||
gpios = <&pm8150_gpios 6 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&apps_rsc {
|
||||
pm8150-rpmh-regulators {
|
||||
compatible = "qcom,pm8150-rpmh-regulators";
|
||||
qcom,pmic-id = "a";
|
||||
|
||||
vdd-s1-supply = <&vph_pwr>;
|
||||
vdd-s2-supply = <&vph_pwr>;
|
||||
vdd-s3-supply = <&vph_pwr>;
|
||||
vdd-s4-supply = <&vph_pwr>;
|
||||
vdd-s5-supply = <&vph_pwr>;
|
||||
vdd-s6-supply = <&vph_pwr>;
|
||||
vdd-s7-supply = <&vph_pwr>;
|
||||
vdd-s8-supply = <&vph_pwr>;
|
||||
vdd-s9-supply = <&vph_pwr>;
|
||||
vdd-s10-supply = <&vph_pwr>;
|
||||
|
||||
vdd-l1-l8-l11-supply = <&vreg_s6a_0p9>;
|
||||
vdd-l2-l10-supply = <&vreg_bob>;
|
||||
vdd-l3-l4-l5-l18-supply = <&vreg_s6a_0p9>;
|
||||
vdd-l6-l9-supply = <&vreg_s8c_1p3>;
|
||||
vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p0>;
|
||||
vdd-l13-l16-l17-supply = <&vreg_bob>;
|
||||
|
||||
vreg_s5a_2p0: smps5 {
|
||||
regulator-min-microvolt = <1904000>;
|
||||
regulator-max-microvolt = <2000000>;
|
||||
};
|
||||
|
||||
vreg_s6a_0p9: smps6 {
|
||||
regulator-min-microvolt = <920000>;
|
||||
regulator-max-microvolt = <1128000>;
|
||||
};
|
||||
|
||||
vdda_wcss_pll:
|
||||
vreg_l1a_0p75: ldo1 {
|
||||
regulator-min-microvolt = <752000>;
|
||||
regulator-max-microvolt = <752000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vdd_pdphy:
|
||||
vdda_usb_hs_3p1:
|
||||
vreg_l2a_3p1: ldo2 {
|
||||
regulator-min-microvolt = <3072000>;
|
||||
regulator-max-microvolt = <3072000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l3a_0p8: ldo3 {
|
||||
regulator-min-microvolt = <480000>;
|
||||
regulator-max-microvolt = <932000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vdd_usb_hs_core:
|
||||
vdda_csi_0_0p9:
|
||||
vdda_csi_1_0p9:
|
||||
vdda_csi_2_0p9:
|
||||
vdda_csi_3_0p9:
|
||||
vdda_dsi_0_0p9:
|
||||
vdda_dsi_1_0p9:
|
||||
vdda_dsi_0_pll_0p9:
|
||||
vdda_dsi_1_pll_0p9:
|
||||
vdda_pcie_1ln_core:
|
||||
vdda_pcie_2ln_core:
|
||||
vdda_pll_hv_cc_ebi01:
|
||||
vdda_pll_hv_cc_ebi23:
|
||||
vdda_qrefs_0p875_5:
|
||||
vdda_sp_sensor:
|
||||
vdda_ufs_2ln_core_1:
|
||||
vdda_ufs_2ln_core_2:
|
||||
vdda_usb_ss_dp_core_1:
|
||||
vdda_usb_ss_dp_core_2:
|
||||
vdda_qlink_lv:
|
||||
vdda_qlink_lv_ck:
|
||||
vreg_l5a_0p875: ldo5 {
|
||||
regulator-min-microvolt = <880000>;
|
||||
regulator-max-microvolt = <880000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l6a_1p2: ldo6 {
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l7a_1p8: ldo7 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vddpx_10:
|
||||
vreg_l9a_1p2: ldo9 {
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l10a_2p5: ldo10 {
|
||||
regulator-min-microvolt = <2504000>;
|
||||
regulator-max-microvolt = <2960000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l11a_0p8: ldo11 {
|
||||
regulator-min-microvolt = <800000>;
|
||||
regulator-max-microvolt = <800000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vdd_qfprom:
|
||||
vdd_qfprom_sp:
|
||||
vdda_apc_cs_1p8:
|
||||
vdda_gfx_cs_1p8:
|
||||
vdda_usb_hs_1p8:
|
||||
vdda_qrefs_vref_1p8:
|
||||
vddpx_10_a:
|
||||
vreg_l12a_1p8: ldo12 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l13a_2p7: ldo13 {
|
||||
regulator-min-microvolt = <2704000>;
|
||||
regulator-max-microvolt = <2704000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l14a_1p8: ldo14 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1880000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l15a_1p7: ldo15 {
|
||||
regulator-min-microvolt = <1704000>;
|
||||
regulator-max-microvolt = <1704000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l16a_2p7: ldo16 {
|
||||
regulator-min-microvolt = <2704000>;
|
||||
regulator-max-microvolt = <2960000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l17a_3p0: ldo17 {
|
||||
regulator-min-microvolt = <2856000>;
|
||||
regulator-max-microvolt = <3008000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
};
|
||||
|
||||
pm8150l-rpmh-regulators {
|
||||
compatible = "qcom,pm8150l-rpmh-regulators";
|
||||
qcom,pmic-id = "c";
|
||||
|
||||
vdd-s1-supply = <&vph_pwr>;
|
||||
vdd-s2-supply = <&vph_pwr>;
|
||||
vdd-s3-supply = <&vph_pwr>;
|
||||
vdd-s4-supply = <&vph_pwr>;
|
||||
vdd-s5-supply = <&vph_pwr>;
|
||||
vdd-s6-supply = <&vph_pwr>;
|
||||
vdd-s7-supply = <&vph_pwr>;
|
||||
vdd-s8-supply = <&vph_pwr>;
|
||||
|
||||
vdd-l1-l8-supply = <&vreg_s4a_1p8>;
|
||||
vdd-l2-l3-supply = <&vreg_s8c_1p3>;
|
||||
vdd-l4-l5-l6-supply = <&vreg_bob>;
|
||||
vdd-l7-l11-supply = <&vreg_bob>;
|
||||
vdd-l9-l10-supply = <&vreg_bob>;
|
||||
|
||||
vdd-bob-supply = <&vph_pwr>;
|
||||
vdd-flash-supply = <&vreg_bob>;
|
||||
vdd-rgb-supply = <&vreg_bob>;
|
||||
|
||||
vreg_bob: bob {
|
||||
regulator-min-microvolt = <3008000>;
|
||||
regulator-max-microvolt = <4000000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
|
||||
regulator-allow-bypass;
|
||||
};
|
||||
|
||||
vreg_s8c_1p3: smps8 {
|
||||
regulator-min-microvolt = <1352000>;
|
||||
regulator-max-microvolt = <1352000>;
|
||||
};
|
||||
|
||||
vreg_l1c_1p8: ldo1 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vdda_wcss_adcdac_1:
|
||||
vdda_wcss_adcdac_22:
|
||||
vreg_l2c_1p3: ldo2 {
|
||||
regulator-min-microvolt = <1304000>;
|
||||
regulator-max-microvolt = <1304000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vdda_hv_ebi0:
|
||||
vdda_hv_ebi1:
|
||||
vdda_hv_ebi2:
|
||||
vdda_hv_ebi3:
|
||||
vdda_hv_refgen0:
|
||||
vdda_qlink_hv_ck:
|
||||
vreg_l3c_1p2: ldo3 {
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vddpx_5:
|
||||
vreg_l4c_1p8: ldo4 {
|
||||
regulator-min-microvolt = <1704000>;
|
||||
regulator-max-microvolt = <2928000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vddpx_6:
|
||||
vreg_l5c_1p8: ldo5 {
|
||||
regulator-min-microvolt = <1704000>;
|
||||
regulator-max-microvolt = <2928000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vddpx_2:
|
||||
vreg_l6c_2p9: ldo6 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <2960000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l7c_3p0: ldo7 {
|
||||
regulator-min-microvolt = <2856000>;
|
||||
regulator-max-microvolt = <3104000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l8c_1p8: ldo8 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l9c_2p9: ldo9 {
|
||||
regulator-min-microvolt = <2704000>;
|
||||
regulator-max-microvolt = <2960000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l10c_3p3: ldo10 {
|
||||
regulator-min-microvolt = <3000000>;
|
||||
regulator-max-microvolt = <3312000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l11c_3p3: ldo11 {
|
||||
regulator-min-microvolt = <3000000>;
|
||||
regulator-max-microvolt = <3312000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
};
|
||||
|
||||
pm8009-rpmh-regulators {
|
||||
compatible = "qcom,pm8009-rpmh-regulators";
|
||||
qcom,pmic-id = "f";
|
||||
|
||||
vdd-s1-supply = <&vph_pwr>;
|
||||
vdd-s2-supply = <&vreg_bob>;
|
||||
|
||||
vdd-l2-supply = <&vreg_s8c_1p3>;
|
||||
vdd-l5-l6-supply = <&vreg_bob>;
|
||||
|
||||
vreg_l2f_1p2: ldo2 {
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l5f_2p85: ldo5 {
|
||||
regulator-min-microvolt = <2800000>;
|
||||
regulator-max-microvolt = <2800000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l6f_2p85: ldo6 {
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
regulator-min-microvolt = <2856000>;
|
||||
regulator-max-microvolt = <2856000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&qupv3_id_1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pon {
|
||||
pwrkey {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
resin {
|
||||
compatible = "qcom,pm8941-resin";
|
||||
interrupts = <0x0 0x8 0x1 IRQ_TYPE_EDGE_BOTH>;
|
||||
debounce = <15625>;
|
||||
bias-pull-up;
|
||||
linux,code = <KEY_VOLUMEDOWN>;
|
||||
};
|
||||
};
|
||||
|
||||
&remoteproc_adsp {
|
||||
status = "okay";
|
||||
|
||||
firmware-name = "qcom/sm8150/adsp.mbn";
|
||||
};
|
||||
|
||||
&remoteproc_cdsp {
|
||||
status = "okay";
|
||||
|
||||
firmware-name = "qcom/sm8150/cdsp.mbn";
|
||||
};
|
||||
|
||||
&remoteproc_slpi {
|
||||
status = "okay";
|
||||
|
||||
firmware-name = "qcom/sm8150/slpi.mbn";
|
||||
};
|
||||
|
||||
&tlmm {
|
||||
gpio-reserved-ranges = <0 4>, <126 4>;
|
||||
};
|
||||
|
||||
&uart2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&ufs_mem_hc {
|
||||
status = "okay";
|
||||
|
||||
reset-gpios = <&tlmm 175 GPIO_ACTIVE_LOW>;
|
||||
|
||||
vcc-supply = <&vreg_l10a_2p5>;
|
||||
vcc-max-microamp = <750000>;
|
||||
vccq-supply = <&vreg_l9a_1p2>;
|
||||
vccq-max-microamp = <700000>;
|
||||
vccq2-supply = <&vreg_s4a_1p8>;
|
||||
vccq2-max-microamp = <750000>;
|
||||
};
|
||||
|
||||
&ufs_mem_phy {
|
||||
status = "okay";
|
||||
|
||||
vdda-phy-supply = <&vdda_ufs_2ln_core_1>;
|
||||
vdda-max-microamp = <90200>;
|
||||
vdda-pll-supply = <&vreg_l3c_1p2>;
|
||||
vdda-pll-max-microamp = <19000>;
|
||||
};
|
||||
|
||||
&usb_1_hsphy {
|
||||
status = "okay";
|
||||
vdda-pll-supply = <&vdd_usb_hs_core>;
|
||||
vdda33-supply = <&vdda_usb_hs_3p1>;
|
||||
vdda18-supply = <&vdda_usb_hs_1p8>;
|
||||
};
|
||||
|
||||
&usb_2_hsphy {
|
||||
status = "okay";
|
||||
vdda-pll-supply = <&vdd_usb_hs_core>;
|
||||
vdda33-supply = <&vdda_usb_hs_3p1>;
|
||||
vdda18-supply = <&vdda_usb_hs_1p8>;
|
||||
};
|
||||
|
||||
&usb_1_qmpphy {
|
||||
status = "okay";
|
||||
vdda-phy-supply = <&vreg_l3c_1p2>;
|
||||
vdda-pll-supply = <&vdda_usb_ss_dp_core_1>;
|
||||
};
|
||||
|
||||
&usb_2_qmpphy {
|
||||
status = "okay";
|
||||
vdda-phy-supply = <&vreg_l3c_1p2>;
|
||||
vdda-pll-supply = <&vdda_usb_ss_dp_core_1>;
|
||||
};
|
||||
|
||||
&usb_1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_1_dwc3 {
|
||||
dr_mode = "peripheral";
|
||||
};
|
||||
|
||||
&usb_2_dwc3 {
|
||||
dr_mode = "host";
|
||||
};
|
||||
Loading…
Reference in New Issue