From 0aaece81114e403315ae01a6cd36044e32922d3b Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 30 Mar 2017 14:30:40 +0200 Subject: [PATCH] iwlwifi: split firmware API from iwl-trans.h In order to more clearly document which parts of this file are firmware API and which are something else, split the firmware API into a separate file to include here. Signed-off-by: Johannes Berg Signed-off-by: Luca Coelho --- .../net/wireless/intel/iwlwifi/iwl-fw-api.h | 205 ++++++++++++++++++ .../net/wireless/intel/iwlwifi/iwl-trans.h | 137 +----------- 2 files changed, 206 insertions(+), 136 deletions(-) create mode 100644 drivers/net/wireless/intel/iwlwifi/iwl-fw-api.h diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-fw-api.h b/drivers/net/wireless/intel/iwlwifi/iwl-fw-api.h new file mode 100644 index 000000000000..a004409fa984 --- /dev/null +++ b/drivers/net/wireless/intel/iwlwifi/iwl-fw-api.h @@ -0,0 +1,205 @@ +/****************************************************************************** + * + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2007 - 2014 Intel Corporation. All rights reserved. + * Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH + * Copyright(c) 2016 - 2017 Intel Deutschland GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * The full GNU General Public License is included in this distribution + * in the file called COPYING. + * + * Contact Information: + * Intel Linux Wireless + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + * + * BSD LICENSE + * + * Copyright(c) 2005 - 2014 Intel Corporation. All rights reserved. + * Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH + * Copyright(c) 2016 - 2017 Intel Deutschland GmbH + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + *****************************************************************************/ +#ifndef __iwl_fw_api_h__ +#define __iwl_fw_api_h__ + +/** + * DOC: Host command section + * + * A host command is a command issued by the upper layer to the fw. There are + * several versions of fw that have several APIs. The transport layer is + * completely agnostic to these differences. + * The transport does provide helper functionality (i.e. SYNC / ASYNC mode), + */ +#define SEQ_TO_QUEUE(s) (((s) >> 8) & 0x1f) +#define QUEUE_TO_SEQ(q) (((q) & 0x1f) << 8) +#define SEQ_TO_INDEX(s) ((s) & 0xff) +#define INDEX_TO_SEQ(i) ((i) & 0xff) +#define SEQ_RX_FRAME cpu_to_le16(0x8000) + +/* + * those functions retrieve specific information from + * the id field in the iwl_host_cmd struct which contains + * the command id, the group id and the version of the command + * and vice versa +*/ +static inline u8 iwl_cmd_opcode(u32 cmdid) +{ + return cmdid & 0xFF; +} + +static inline u8 iwl_cmd_groupid(u32 cmdid) +{ + return ((cmdid & 0xFF00) >> 8); +} + +static inline u8 iwl_cmd_version(u32 cmdid) +{ + return ((cmdid & 0xFF0000) >> 16); +} + +static inline u32 iwl_cmd_id(u8 opcode, u8 groupid, u8 version) +{ + return opcode + (groupid << 8) + (version << 16); +} + +/* make u16 wide id out of u8 group and opcode */ +#define WIDE_ID(grp, opcode) (((grp) << 8) | (opcode)) +#define DEF_ID(opcode) ((1 << 8) | (opcode)) + +/* due to the conversion, this group is special; new groups + * should be defined in the appropriate fw-api header files + */ +#define IWL_ALWAYS_LONG_GROUP 1 + +/** + * struct iwl_cmd_header + * + * This header format appears in the beginning of each command sent from the + * driver, and each response/notification received from uCode. + */ +struct iwl_cmd_header { + u8 cmd; /* Command ID: REPLY_RXON, etc. */ + u8 group_id; + /* + * The driver sets up the sequence number to values of its choosing. + * uCode does not use this value, but passes it back to the driver + * when sending the response to each driver-originated command, so + * the driver can match the response to the command. Since the values + * don't get used by uCode, the driver may set up an arbitrary format. + * + * There is one exception: uCode sets bit 15 when it originates + * the response/notification, i.e. when the response/notification + * is not a direct response to a command sent by the driver. For + * example, uCode issues REPLY_RX when it sends a received frame + * to the driver; it is not a direct response to any driver command. + * + * The Linux driver uses the following format: + * + * 0:7 tfd index - position within TX queue + * 8:12 TX queue id + * 13:14 reserved + * 15 unsolicited RX or uCode-originated notification + */ + __le16 sequence; +} __packed; + +/** + * struct iwl_cmd_header_wide + * + * This header format appears in the beginning of each command sent from the + * driver, and each response/notification received from uCode. + * this is the wide version that contains more information about the command + * like length, version and command type + */ +struct iwl_cmd_header_wide { + u8 cmd; + u8 group_id; + __le16 sequence; + __le16 length; + u8 reserved; + u8 version; +} __packed; + +/** + * iwl_tx_queue_cfg_actions - TXQ config options + * @TX_QUEUE_CFG_ENABLE_QUEUE: enable a queue + * @TX_QUEUE_CFG_TFD_SHORT_FORMAT: use short TFD format + */ +enum iwl_tx_queue_cfg_actions { + TX_QUEUE_CFG_ENABLE_QUEUE = BIT(0), + TX_QUEUE_CFG_TFD_SHORT_FORMAT = BIT(1), +}; + +/** + * struct iwl_tx_queue_cfg_cmd - txq hw scheduler config command + * @sta_id: station id + * @tid: tid of the queue + * @flags: see &enum iwl_tx_queue_cfg_actions + * @cb_size: size of TFD cyclic buffer. Value is exponent - 3. + * Minimum value 0 (8 TFDs), maximum value 5 (256 TFDs) + * @byte_cnt_addr: address of byte count table + * @tfdq_addr: address of TFD circular buffer + */ +struct iwl_tx_queue_cfg_cmd { + u8 sta_id; + u8 tid; + __le16 flags; + __le32 cb_size; + __le64 byte_cnt_addr; + __le64 tfdq_addr; +} __packed; /* TX_QUEUE_CFG_CMD_API_S_VER_2 */ + +/** + * struct iwl_tx_queue_cfg_rsp - response to txq hw scheduler config + * @queue_number: queue number assigned to this RA -TID + * @flags: set on failure + * @write_pointer: initial value for write pointer + */ +struct iwl_tx_queue_cfg_rsp { + __le16 queue_number; + __le16 flags; + __le16 write_pointer; + __le16 reserved; +} __packed; /* TX_QUEUE_CFG_RSP_API_S_VER_2 */ + +#endif /* __iwl_fw_api_h__*/ diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-trans.h b/drivers/net/wireless/intel/iwlwifi/iwl-trans.h index 63e4857718c7..e965285f84f1 100644 --- a/drivers/net/wireless/intel/iwlwifi/iwl-trans.h +++ b/drivers/net/wireless/intel/iwlwifi/iwl-trans.h @@ -76,6 +76,7 @@ #include "iwl-config.h" #include "iwl-fw.h" #include "iwl-op-mode.h" +#include "iwl-fw-api.h" /** * DOC: Transport layer - what is it ? @@ -111,104 +112,6 @@ * 6) Eventually, the free function will be called. */ -/** - * DOC: Host command section - * - * A host command is a command issued by the upper layer to the fw. There are - * several versions of fw that have several APIs. The transport layer is - * completely agnostic to these differences. - * The transport does provide helper functionality (i.e. SYNC / ASYNC mode), - */ -#define SEQ_TO_QUEUE(s) (((s) >> 8) & 0x1f) -#define QUEUE_TO_SEQ(q) (((q) & 0x1f) << 8) -#define SEQ_TO_INDEX(s) ((s) & 0xff) -#define INDEX_TO_SEQ(i) ((i) & 0xff) -#define SEQ_RX_FRAME cpu_to_le16(0x8000) - -/* - * those functions retrieve specific information from - * the id field in the iwl_host_cmd struct which contains - * the command id, the group id and the version of the command - * and vice versa -*/ -static inline u8 iwl_cmd_opcode(u32 cmdid) -{ - return cmdid & 0xFF; -} - -static inline u8 iwl_cmd_groupid(u32 cmdid) -{ - return ((cmdid & 0xFF00) >> 8); -} - -static inline u8 iwl_cmd_version(u32 cmdid) -{ - return ((cmdid & 0xFF0000) >> 16); -} - -static inline u32 iwl_cmd_id(u8 opcode, u8 groupid, u8 version) -{ - return opcode + (groupid << 8) + (version << 16); -} - -/* make u16 wide id out of u8 group and opcode */ -#define WIDE_ID(grp, opcode) ((grp << 8) | opcode) -#define DEF_ID(opcode) ((1 << 8) | (opcode)) - -/* due to the conversion, this group is special; new groups - * should be defined in the appropriate fw-api header files - */ -#define IWL_ALWAYS_LONG_GROUP 1 - -/** - * struct iwl_cmd_header - * - * This header format appears in the beginning of each command sent from the - * driver, and each response/notification received from uCode. - */ -struct iwl_cmd_header { - u8 cmd; /* Command ID: REPLY_RXON, etc. */ - u8 group_id; - /* - * The driver sets up the sequence number to values of its choosing. - * uCode does not use this value, but passes it back to the driver - * when sending the response to each driver-originated command, so - * the driver can match the response to the command. Since the values - * don't get used by uCode, the driver may set up an arbitrary format. - * - * There is one exception: uCode sets bit 15 when it originates - * the response/notification, i.e. when the response/notification - * is not a direct response to a command sent by the driver. For - * example, uCode issues REPLY_RX when it sends a received frame - * to the driver; it is not a direct response to any driver command. - * - * The Linux driver uses the following format: - * - * 0:7 tfd index - position within TX queue - * 8:12 TX queue id - * 13:14 reserved - * 15 unsolicited RX or uCode-originated notification - */ - __le16 sequence; -} __packed; - -/** - * struct iwl_cmd_header_wide - * - * This header format appears in the beginning of each command sent from the - * driver, and each response/notification received from uCode. - * this is the wide version that contains more information about the command - * like length, version and command type - */ -struct iwl_cmd_header_wide { - u8 cmd; - u8 group_id; - __le16 sequence; - __le16 length; - u8 reserved; - u8 version; -} __packed; - #define FH_RSCSR_FRAME_SIZE_MSK 0x00003FFF /* bits 0-13 */ #define FH_RSCSR_FRAME_INVALID 0x55550000 #define FH_RSCSR_FRAME_ALIGN 0x40 @@ -533,44 +436,6 @@ struct iwl_trans_txq_scd_cfg { int frame_limit; }; -/* Available options for &struct iwl_tx_queue_cfg_cmd */ -enum iwl_tx_queue_cfg_actions { - TX_QUEUE_CFG_ENABLE_QUEUE = BIT(0), - TX_QUEUE_CFG_TFD_SHORT_FORMAT = BIT(1), -}; - -/** - * struct iwl_tx_queue_cfg_cmd - txq hw scheduler config command - * @sta_id: station id - * @tid: tid of the queue - * @flags: Bit 0 - on enable, off - disable, Bit 1 - short TFD format - * @cb_size: size of TFD cyclic buffer. Value is exponent - 3. - * Minimum value 0 (8 TFDs), maximum value 5 (256 TFDs) - * @byte_cnt_addr: address of byte count table - * @tfdq_addr: address of TFD circular buffer - */ -struct iwl_tx_queue_cfg_cmd { - u8 sta_id; - u8 tid; - __le16 flags; - __le32 cb_size; - __le64 byte_cnt_addr; - __le64 tfdq_addr; -} __packed; /* TX_QUEUE_CFG_CMD_API_S_VER_2 */ - -/** - * struct iwl_tx_queue_cfg_rsp - response to txq hw scheduler config - * @queue_number: queue number assigned to this RA -TID - * @flags: set on failure - * @write_pointer: initial value for write pointer - */ -struct iwl_tx_queue_cfg_rsp { - __le16 queue_number; - __le16 flags; - __le16 write_pointer; - __le16 reserved; -} __packed; /* TX_QUEUE_CFG_RSP_API_S_VER_2 */ - /** * struct iwl_trans_ops - transport specific operations *