diff --git a/Documentation/devicetree/bindings/power/bq2415x.txt b/Documentation/devicetree/bindings/power/bq2415x.txt
new file mode 100644
index 000000000000..d0327f0b59ad
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/bq2415x.txt
@@ -0,0 +1,47 @@
+Binding for TI bq2415x Li-Ion Charger
+
+Required properties:
+- compatible: Should contain one of the following:
+ * "ti,bq24150"
+ * "ti,bq24150"
+ * "ti,bq24150a"
+ * "ti,bq24151"
+ * "ti,bq24151a"
+ * "ti,bq24152"
+ * "ti,bq24153"
+ * "ti,bq24153a"
+ * "ti,bq24155"
+ * "ti,bq24156"
+ * "ti,bq24156a"
+ * "ti,bq24158"
+- reg:			   integer, i2c address of the device.
+- ti,current-limit:	   integer, initial maximum current charger can pull
+			   from power supply in mA.
+- ti,weak-battery-voltage: integer, weak battery voltage threshold in mV.
+			   The chip will use slow precharge if battery voltage
+			   is below this value.
+- ti,battery-regulation-voltage: integer, maximum charging voltage in mV.
+- ti,charge-current:	   integer, maximum charging current in mA.
+- ti,termination-current:  integer, charge will be terminated when current in
+			   constant-voltage phase drops below this value (in mA).
+- ti,resistor-sense:	   integer, value of sensing resistor in milliohm.
+
+Optional properties:
+- ti,usb-charger-detection: phandle to usb charger detection device.
+			    (required for auto mode)
+
+Example from Nokia N900:
+
+bq24150a {
+	compatible = "ti,bq24150a";
+	reg = <0x6b>;
+
+	ti,current-limit = <100>;
+	ti,weak-battery-voltage = <3400>;
+	ti,battery-regulation-voltage = <4200>;
+	ti,charge-current = <650>;
+	ti,termination-current = <100>;
+	ti,resistor-sense = <68>;
+
+	ti,usb-charger-detection = <&isp1704>;
+};
diff --git a/drivers/power/ds2782_battery.c b/drivers/power/ds2782_battery.c
index 563174891c90..041f9b638d28 100644
--- a/drivers/power/ds2782_battery.c
+++ b/drivers/power/ds2782_battery.c
@@ -192,7 +192,7 @@ static int ds2786_get_voltage(struct ds278x_info *info, int *voltage_uV)
 
 	/*
 	 * Voltage is measured in units of 1.22mV. The voltage is stored as
-	 * a 10-bit number plus sign, in the upper bits of a 16-bit register
+	 * a 12-bit number plus sign, in the upper bits of a 16-bit register
 	 */
 	err = ds278x_read_reg16(info, DS278x_REG_VOLT_MSB, &raw);
 	if (err)
diff --git a/drivers/power/isp1704_charger.c b/drivers/power/isp1704_charger.c
index 80edb7d8cb54..0b4cf9d63291 100644
--- a/drivers/power/isp1704_charger.c
+++ b/drivers/power/isp1704_charger.c
@@ -444,8 +444,6 @@ static int isp1704_charger_probe(struct platform_device *pdev)
 		ret = PTR_ERR(isp->phy);
 		goto fail0;
 	}
-	if (!isp->phy)
-		goto fail0;
 
 	isp->dev = &pdev->dev;
 	platform_set_drvdata(pdev, isp);
diff --git a/drivers/power/max17040_battery.c b/drivers/power/max17040_battery.c
index c7ff6d67f158..0fbac861080d 100644
--- a/drivers/power/max17040_battery.c
+++ b/drivers/power/max17040_battery.c
@@ -148,7 +148,7 @@ static void max17040_get_online(struct i2c_client *client)
 {
 	struct max17040_chip *chip = i2c_get_clientdata(client);
 
-	if (chip->pdata->battery_online)
+	if (chip->pdata && chip->pdata->battery_online)
 		chip->online = chip->pdata->battery_online();
 	else
 		chip->online = 1;
@@ -158,7 +158,8 @@ static void max17040_get_status(struct i2c_client *client)
 {
 	struct max17040_chip *chip = i2c_get_clientdata(client);
 
-	if (!chip->pdata->charger_online || !chip->pdata->charger_enable) {
+	if (!chip->pdata || !chip->pdata->charger_online
+			|| !chip->pdata->charger_enable) {
 		chip->status = POWER_SUPPLY_STATUS_UNKNOWN;
 		return;
 	}