can: add driver for Softing card
This patch adds the driver that creates a platform:softing device from a pcmcia_device Note: the Kconfig indicates a dependency on the softing.ko driver, but this is purely to make configuration intuitive. This driver will work independent, but no CAN network devices appear until softing.ko is loaded too. Signed-off-by: Kurt Van Dijck <kurt.van.dijck@eia.be> Acked-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Kurt Van Dijck
David S. Miller
parent
03fd3cf5a1
commit
0a0b7a5f7a
|
|
@ -14,3 +14,17 @@ config CAN_SOFTING
|
|||
controls the 2 busses on the card together.
|
||||
As such, some actions (start/stop/busoff recovery) on 1 bus
|
||||
must bring down the other bus too temporarily.
|
||||
|
||||
config CAN_SOFTING_CS
|
||||
tristate "Softing Gmbh CAN pcmcia cards"
|
||||
depends on PCMCIA
|
||||
select CAN_SOFTING
|
||||
---help---
|
||||
Support for PCMCIA cards from Softing Gmbh & some cards
|
||||
from Vector Gmbh.
|
||||
You need firmware for these, which you can get at
|
||||
http://developer.berlios.de/projects/socketcan/
|
||||
This version of the driver is written against
|
||||
firmware version 4.6 (softing-fw-4.6-binaries.tar.gz)
|
||||
In order to use the card as CAN device, you need the Softing generic
|
||||
support too.
|
||||
|
|
|
|||
|
|
@ -1,5 +1,6 @@
|
|||
|
||||
softing-y := softing_main.o softing_fw.o
|
||||
obj-$(CONFIG_CAN_SOFTING) += softing.o
|
||||
obj-$(CONFIG_CAN_SOFTING_CS) += softing_cs.o
|
||||
|
||||
ccflags-$(CONFIG_CAN_DEBUG_DEVICES) := -DDEBUG
|
||||
|
|
|
|||
|
|
@ -0,0 +1,359 @@
|
|||
/*
|
||||
* Copyright (C) 2008-2010
|
||||
*
|
||||
* - Kurt Van Dijck, EIA Electronics
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the version 2 of the GNU General Public License
|
||||
* as published by the Free Software Foundation
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
||||
*/
|
||||
|
||||
#include <linux/module.h>
|
||||
#include <linux/kernel.h>
|
||||
|
||||
#include <pcmcia/cistpl.h>
|
||||
#include <pcmcia/ds.h>
|
||||
|
||||
#include "softing_platform.h"
|
||||
|
||||
static int softingcs_index;
|
||||
static spinlock_t softingcs_index_lock;
|
||||
|
||||
static int softingcs_reset(struct platform_device *pdev, int v);
|
||||
static int softingcs_enable_irq(struct platform_device *pdev, int v);
|
||||
|
||||
/*
|
||||
* platform_data descriptions
|
||||
*/
|
||||
#define MHZ (1000*1000)
|
||||
static const struct softing_platform_data softingcs_platform_data[] = {
|
||||
{
|
||||
.name = "CANcard",
|
||||
.manf = 0x0168, .prod = 0x001,
|
||||
.generation = 1,
|
||||
.nbus = 2,
|
||||
.freq = 16 * MHZ, .max_brp = 32, .max_sjw = 4,
|
||||
.dpram_size = 0x0800,
|
||||
.boot = {0x0000, 0x000000, fw_dir "bcard.bin",},
|
||||
.load = {0x0120, 0x00f600, fw_dir "ldcard.bin",},
|
||||
.app = {0x0010, 0x0d0000, fw_dir "cancard.bin",},
|
||||
.reset = softingcs_reset,
|
||||
.enable_irq = softingcs_enable_irq,
|
||||
}, {
|
||||
.name = "CANcard-NEC",
|
||||
.manf = 0x0168, .prod = 0x002,
|
||||
.generation = 1,
|
||||
.nbus = 2,
|
||||
.freq = 16 * MHZ, .max_brp = 32, .max_sjw = 4,
|
||||
.dpram_size = 0x0800,
|
||||
.boot = {0x0000, 0x000000, fw_dir "bcard.bin",},
|
||||
.load = {0x0120, 0x00f600, fw_dir "ldcard.bin",},
|
||||
.app = {0x0010, 0x0d0000, fw_dir "cancard.bin",},
|
||||
.reset = softingcs_reset,
|
||||
.enable_irq = softingcs_enable_irq,
|
||||
}, {
|
||||
.name = "CANcard-SJA",
|
||||
.manf = 0x0168, .prod = 0x004,
|
||||
.generation = 1,
|
||||
.nbus = 2,
|
||||
.freq = 20 * MHZ, .max_brp = 32, .max_sjw = 4,
|
||||
.dpram_size = 0x0800,
|
||||
.boot = {0x0000, 0x000000, fw_dir "bcard.bin",},
|
||||
.load = {0x0120, 0x00f600, fw_dir "ldcard.bin",},
|
||||
.app = {0x0010, 0x0d0000, fw_dir "cansja.bin",},
|
||||
.reset = softingcs_reset,
|
||||
.enable_irq = softingcs_enable_irq,
|
||||
}, {
|
||||
.name = "CANcard-2",
|
||||
.manf = 0x0168, .prod = 0x005,
|
||||
.generation = 2,
|
||||
.nbus = 2,
|
||||
.freq = 24 * MHZ, .max_brp = 64, .max_sjw = 4,
|
||||
.dpram_size = 0x1000,
|
||||
.boot = {0x0000, 0x000000, fw_dir "bcard2.bin",},
|
||||
.load = {0x0120, 0x00f600, fw_dir "ldcard2.bin",},
|
||||
.app = {0x0010, 0x0d0000, fw_dir "cancrd2.bin",},
|
||||
.reset = softingcs_reset,
|
||||
.enable_irq = NULL,
|
||||
}, {
|
||||
.name = "Vector-CANcard",
|
||||
.manf = 0x0168, .prod = 0x081,
|
||||
.generation = 1,
|
||||
.nbus = 2,
|
||||
.freq = 16 * MHZ, .max_brp = 64, .max_sjw = 4,
|
||||
.dpram_size = 0x0800,
|
||||
.boot = {0x0000, 0x000000, fw_dir "bcard.bin",},
|
||||
.load = {0x0120, 0x00f600, fw_dir "ldcard.bin",},
|
||||
.app = {0x0010, 0x0d0000, fw_dir "cancard.bin",},
|
||||
.reset = softingcs_reset,
|
||||
.enable_irq = softingcs_enable_irq,
|
||||
}, {
|
||||
.name = "Vector-CANcard-SJA",
|
||||
.manf = 0x0168, .prod = 0x084,
|
||||
.generation = 1,
|
||||
.nbus = 2,
|
||||
.freq = 20 * MHZ, .max_brp = 32, .max_sjw = 4,
|
||||
.dpram_size = 0x0800,
|
||||
.boot = {0x0000, 0x000000, fw_dir "bcard.bin",},
|
||||
.load = {0x0120, 0x00f600, fw_dir "ldcard.bin",},
|
||||
.app = {0x0010, 0x0d0000, fw_dir "cansja.bin",},
|
||||
.reset = softingcs_reset,
|
||||
.enable_irq = softingcs_enable_irq,
|
||||
}, {
|
||||
.name = "Vector-CANcard-2",
|
||||
.manf = 0x0168, .prod = 0x085,
|
||||
.generation = 2,
|
||||
.nbus = 2,
|
||||
.freq = 24 * MHZ, .max_brp = 64, .max_sjw = 4,
|
||||
.dpram_size = 0x1000,
|
||||
.boot = {0x0000, 0x000000, fw_dir "bcard2.bin",},
|
||||
.load = {0x0120, 0x00f600, fw_dir "ldcard2.bin",},
|
||||
.app = {0x0010, 0x0d0000, fw_dir "cancrd2.bin",},
|
||||
.reset = softingcs_reset,
|
||||
.enable_irq = NULL,
|
||||
}, {
|
||||
.name = "EDICcard-NEC",
|
||||
.manf = 0x0168, .prod = 0x102,
|
||||
.generation = 1,
|
||||
.nbus = 2,
|
||||
.freq = 16 * MHZ, .max_brp = 64, .max_sjw = 4,
|
||||
.dpram_size = 0x0800,
|
||||
.boot = {0x0000, 0x000000, fw_dir "bcard.bin",},
|
||||
.load = {0x0120, 0x00f600, fw_dir "ldcard.bin",},
|
||||
.app = {0x0010, 0x0d0000, fw_dir "cancard.bin",},
|
||||
.reset = softingcs_reset,
|
||||
.enable_irq = softingcs_enable_irq,
|
||||
}, {
|
||||
.name = "EDICcard-2",
|
||||
.manf = 0x0168, .prod = 0x105,
|
||||
.generation = 2,
|
||||
.nbus = 2,
|
||||
.freq = 24 * MHZ, .max_brp = 64, .max_sjw = 4,
|
||||
.dpram_size = 0x1000,
|
||||
.boot = {0x0000, 0x000000, fw_dir "bcard2.bin",},
|
||||
.load = {0x0120, 0x00f600, fw_dir "ldcard2.bin",},
|
||||
.app = {0x0010, 0x0d0000, fw_dir "cancrd2.bin",},
|
||||
.reset = softingcs_reset,
|
||||
.enable_irq = NULL,
|
||||
}, {
|
||||
0, 0,
|
||||
},
|
||||
};
|
||||
|
||||
MODULE_FIRMWARE(fw_dir "bcard.bin");
|
||||
MODULE_FIRMWARE(fw_dir "ldcard.bin");
|
||||
MODULE_FIRMWARE(fw_dir "cancard.bin");
|
||||
MODULE_FIRMWARE(fw_dir "cansja.bin");
|
||||
|
||||
MODULE_FIRMWARE(fw_dir "bcard2.bin");
|
||||
MODULE_FIRMWARE(fw_dir "ldcard2.bin");
|
||||
MODULE_FIRMWARE(fw_dir "cancrd2.bin");
|
||||
|
||||
static __devinit const struct softing_platform_data
|
||||
*softingcs_find_platform_data(unsigned int manf, unsigned int prod)
|
||||
{
|
||||
const struct softing_platform_data *lp;
|
||||
|
||||
for (lp = softingcs_platform_data; lp->manf; ++lp) {
|
||||
if ((lp->manf == manf) && (lp->prod == prod))
|
||||
return lp;
|
||||
}
|
||||
return NULL;
|
||||
}
|
||||
|
||||
/*
|
||||
* platformdata callbacks
|
||||
*/
|
||||
static int softingcs_reset(struct platform_device *pdev, int v)
|
||||
{
|
||||
struct pcmcia_device *pcmcia = to_pcmcia_dev(pdev->dev.parent);
|
||||
|
||||
dev_dbg(&pdev->dev, "pcmcia config [2] %02x\n", v ? 0 : 0x20);
|
||||
return pcmcia_write_config_byte(pcmcia, 2, v ? 0 : 0x20);
|
||||
}
|
||||
|
||||
static int softingcs_enable_irq(struct platform_device *pdev, int v)
|
||||
{
|
||||
struct pcmcia_device *pcmcia = to_pcmcia_dev(pdev->dev.parent);
|
||||
|
||||
dev_dbg(&pdev->dev, "pcmcia config [0] %02x\n", v ? 0x60 : 0);
|
||||
return pcmcia_write_config_byte(pcmcia, 0, v ? 0x60 : 0);
|
||||
}
|
||||
|
||||
/*
|
||||
* pcmcia check
|
||||
*/
|
||||
static __devinit int softingcs_probe_config(struct pcmcia_device *pcmcia,
|
||||
void *priv_data)
|
||||
{
|
||||
struct softing_platform_data *pdat = priv_data;
|
||||
struct resource *pres;
|
||||
int memspeed = 0;
|
||||
|
||||
WARN_ON(!pdat);
|
||||
pres = pcmcia->resource[PCMCIA_IOMEM_0];
|
||||
if (resource_size(pres) < 0x1000)
|
||||
return -ERANGE;
|
||||
|
||||
pres->flags |= WIN_MEMORY_TYPE_CM | WIN_ENABLE;
|
||||
if (pdat->generation < 2) {
|
||||
pres->flags |= WIN_USE_WAIT | WIN_DATA_WIDTH_8;
|
||||
memspeed = 3;
|
||||
} else {
|
||||
pres->flags |= WIN_DATA_WIDTH_16;
|
||||
}
|
||||
return pcmcia_request_window(pcmcia, pres, memspeed);
|
||||
}
|
||||
|
||||
static __devexit void softingcs_remove(struct pcmcia_device *pcmcia)
|
||||
{
|
||||
struct platform_device *pdev = pcmcia->priv;
|
||||
|
||||
/* free bits */
|
||||
platform_device_unregister(pdev);
|
||||
/* release pcmcia stuff */
|
||||
pcmcia_disable_device(pcmcia);
|
||||
}
|
||||
|
||||
/*
|
||||
* platform_device wrapper
|
||||
* pdev->resource has 2 entries: io & irq
|
||||
*/
|
||||
static void softingcs_pdev_release(struct device *dev)
|
||||
{
|
||||
struct platform_device *pdev = to_platform_device(dev);
|
||||
kfree(pdev);
|
||||
}
|
||||
|
||||
static __devinit int softingcs_probe(struct pcmcia_device *pcmcia)
|
||||
{
|
||||
int ret;
|
||||
struct platform_device *pdev;
|
||||
const struct softing_platform_data *pdat;
|
||||
struct resource *pres;
|
||||
struct dev {
|
||||
struct platform_device pdev;
|
||||
struct resource res[2];
|
||||
} *dev;
|
||||
|
||||
/* find matching platform_data */
|
||||
pdat = softingcs_find_platform_data(pcmcia->manf_id, pcmcia->card_id);
|
||||
if (!pdat)
|
||||
return -ENOTTY;
|
||||
|
||||
/* setup pcmcia device */
|
||||
pcmcia->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IOMEM |
|
||||
CONF_AUTO_SET_VPP | CONF_AUTO_CHECK_VCC;
|
||||
ret = pcmcia_loop_config(pcmcia, softingcs_probe_config, (void *)pdat);
|
||||
if (ret)
|
||||
goto pcmcia_failed;
|
||||
|
||||
ret = pcmcia_enable_device(pcmcia);
|
||||
if (ret < 0)
|
||||
goto pcmcia_failed;
|
||||
|
||||
pres = pcmcia->resource[PCMCIA_IOMEM_0];
|
||||
if (!pres) {
|
||||
ret = -EBADF;
|
||||
goto pcmcia_bad;
|
||||
}
|
||||
|
||||
/* create softing platform device */
|
||||
dev = kzalloc(sizeof(*dev), GFP_KERNEL);
|
||||
if (!dev) {
|
||||
ret = -ENOMEM;
|
||||
goto mem_failed;
|
||||
}
|
||||
dev->pdev.resource = dev->res;
|
||||
dev->pdev.num_resources = ARRAY_SIZE(dev->res);
|
||||
dev->pdev.dev.release = softingcs_pdev_release;
|
||||
|
||||
pdev = &dev->pdev;
|
||||
pdev->dev.platform_data = (void *)pdat;
|
||||
pdev->dev.parent = &pcmcia->dev;
|
||||
pcmcia->priv = pdev;
|
||||
|
||||
/* platform device resources */
|
||||
pdev->resource[0].flags = IORESOURCE_MEM;
|
||||
pdev->resource[0].start = pres->start;
|
||||
pdev->resource[0].end = pres->end;
|
||||
|
||||
pdev->resource[1].flags = IORESOURCE_IRQ;
|
||||
pdev->resource[1].start = pcmcia->irq;
|
||||
pdev->resource[1].end = pdev->resource[1].start;
|
||||
|
||||
/* platform device setup */
|
||||
spin_lock(&softingcs_index_lock);
|
||||
pdev->id = softingcs_index++;
|
||||
spin_unlock(&softingcs_index_lock);
|
||||
pdev->name = "softing";
|
||||
dev_set_name(&pdev->dev, "softingcs.%i", pdev->id);
|
||||
ret = platform_device_register(pdev);
|
||||
if (ret < 0)
|
||||
goto platform_failed;
|
||||
|
||||
dev_info(&pcmcia->dev, "created %s\n", dev_name(&pdev->dev));
|
||||
return 0;
|
||||
|
||||
platform_failed:
|
||||
kfree(dev);
|
||||
mem_failed:
|
||||
pcmcia_bad:
|
||||
pcmcia_failed:
|
||||
pcmcia_disable_device(pcmcia);
|
||||
pcmcia->priv = NULL;
|
||||
return ret ?: -ENODEV;
|
||||
}
|
||||
|
||||
static /*const*/ struct pcmcia_device_id softingcs_ids[] = {
|
||||
/* softing */
|
||||
PCMCIA_DEVICE_MANF_CARD(0x0168, 0x0001),
|
||||
PCMCIA_DEVICE_MANF_CARD(0x0168, 0x0002),
|
||||
PCMCIA_DEVICE_MANF_CARD(0x0168, 0x0004),
|
||||
PCMCIA_DEVICE_MANF_CARD(0x0168, 0x0005),
|
||||
/* vector, manufacturer? */
|
||||
PCMCIA_DEVICE_MANF_CARD(0x0168, 0x0081),
|
||||
PCMCIA_DEVICE_MANF_CARD(0x0168, 0x0084),
|
||||
PCMCIA_DEVICE_MANF_CARD(0x0168, 0x0085),
|
||||
/* EDIC */
|
||||
PCMCIA_DEVICE_MANF_CARD(0x0168, 0x0102),
|
||||
PCMCIA_DEVICE_MANF_CARD(0x0168, 0x0105),
|
||||
PCMCIA_DEVICE_NULL,
|
||||
};
|
||||
|
||||
MODULE_DEVICE_TABLE(pcmcia, softingcs_ids);
|
||||
|
||||
static struct pcmcia_driver softingcs_driver = {
|
||||
.owner = THIS_MODULE,
|
||||
.name = "softingcs",
|
||||
.id_table = softingcs_ids,
|
||||
.probe = softingcs_probe,
|
||||
.remove = __devexit_p(softingcs_remove),
|
||||
};
|
||||
|
||||
static int __init softingcs_start(void)
|
||||
{
|
||||
spin_lock_init(&softingcs_index_lock);
|
||||
return pcmcia_register_driver(&softingcs_driver);
|
||||
}
|
||||
|
||||
static void __exit softingcs_stop(void)
|
||||
{
|
||||
pcmcia_unregister_driver(&softingcs_driver);
|
||||
}
|
||||
|
||||
module_init(softingcs_start);
|
||||
module_exit(softingcs_stop);
|
||||
|
||||
MODULE_DESCRIPTION("softing CANcard driver"
|
||||
", links PCMCIA card to softing driver");
|
||||
MODULE_LICENSE("GPL v2");
|
||||
Loading…
Reference in New Issue