Here's more than a handful of clk driver fixes for changes that came in

during the merge window:
 
  - Fix the AT91 sama5d2 programmable clk prescaler formula
 
  - A bunch of Amlogic meson clk driver fixes for the VPU clks
 
  - A DMI quirk for Intel's Bay Trail SoC's driver to properly mark
    pmc clks as critical only when really needed
 
  - Stop overwriting CLK_SET_RATE_PARENT flag in mediatek's clk gate
    implementation
 
  - Use the right structure to test for a frequency table in i.MX's
    PLL_1416x driver
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEE9L57QeeUxqYDyoaDrQKIl8bklSUFAlyxC/IRHHNib3lkQGtl
 cm5lbC5vcmcACgkQrQKIl8bklSWPTg//Q9CXbOYC64u2LEMtMKFtxS0UobjFKyMg
 EfRnHM3EuRKHCSPLtcr5bKQkFQYJ7Qx9A8oQm4v1d0KlQ2HyrOuAjfAkCaKweKSK
 iXpvWQMHcyRNPmPhzaDnuGBVXptOQ+kfwjWT4/nbkjW0bnFTwpvx9I5pdUd3UOJv
 IdnYOLKAF8Uwt2nyJd++Bh0UeBhQ1XIl9P46iZGa43nQsQhgSaru3oBnhVOzEti/
 k9Di3H1k1wIKR+xDujl/S3vIIEUcx0eGkL86sFdVq6nYwdQQZKusESC0vh5QJ/Ax
 LLSJcdoM8B84zStkYgIskdltdMZmsUUjLjjEbF5iq1my+LwQZ3JLWkY/gXMeF2Mu
 t5S/TVe5GwqKw2tmoQYkR2Qz76x7/DauZEdUcYtu+K9D2ye5aNDsNNCHlFkamN2N
 EJkBXDqpKGHkyOdUGmL+B0W6D1KxwJEREkCh0aIpbVci1PjfxvI6PLJBF907RkLx
 UNDF/flLoOMy+iUl0ZC05Ie06CkzJMf1e7mMaIIS/FfC7UJ4yNVEHyCADzyrCLOB
 XWwmwCea5NnIi3EQP91a7WO/Gr+yUWxfrQ3viNqM3KbPKOurofMp/JvDnu8bX31O
 l+yiRfpdjIaKUdyDLnTaq3UGBlBlFnqFOWkjRmmMzRZoBmwZhCN7H30LIlqnqnpQ
 wsvhawe24UY=
 =JS0o
 -----END PGP SIGNATURE-----

Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk fixes from Stephen Boyd:
 "Here's more than a handful of clk driver fixes for changes that came
  in during the merge window:

   - Fix the AT91 sama5d2 programmable clk prescaler formula

   - A bunch of Amlogic meson clk driver fixes for the VPU clks

   - A DMI quirk for Intel's Bay Trail SoC's driver to properly mark pmc
     clks as critical only when really needed

   - Stop overwriting CLK_SET_RATE_PARENT flag in mediatek's clk gate
     implementation

   - Use the right structure to test for a frequency table in i.MX's
     PLL_1416x driver"

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: imx: Fix PLL_1416X not rounding rates
  clk: mediatek: fix clk-gate flag setting
  platform/x86: pmc_atom: Drop __initconst on dmi table
  clk: x86: Add system specific quirk to mark clocks as critical
  clk: meson: vid-pll-div: remove warning and return 0 on invalid config
  clk: meson: pll: fix rounding and setting a rate that matches precisely
  clk: meson-g12a: fix VPU clock parents
  clk: meson: g12a: fix VPU clock muxes mask
  clk: meson-gxbb: round the vdec dividers to closest
  clk: at91: fix programmable clock for sama5d2

drivers/clk/at91/clk-programmable.c

@@ -20,8 +20,7 @@
 #define PROG_ID_MAX		7
 
 #define PROG_STATUS_MASK(id)	(1 << ((id) + 8))
-#define PROG_PRES_MASK		0x7
-#define PROG_PRES(layout, pckr)	((pckr >> layout->pres_shift) & PROG_PRES_MASK)
+#define PROG_PRES(layout, pckr)	((pckr >> layout->pres_shift) & layout->pres_mask)
 #define PROG_MAX_RM9200_CSS	3
 
 struct clk_programmable {
@@ -37,20 +36,29 @@ static unsigned long clk_programmable_recalc_rate(struct clk_hw *hw,
 						  unsigned long parent_rate)
 {
 	struct clk_programmable *prog = to_clk_programmable(hw);
+	const struct clk_programmable_layout *layout = prog->layout;
 	unsigned int pckr;
+	unsigned long rate;
 
 	regmap_read(prog->regmap, AT91_PMC_PCKR(prog->id), &pckr);
 
-	return parent_rate >> PROG_PRES(prog->layout, pckr);
+	if (layout->is_pres_direct)
+		rate = parent_rate / (PROG_PRES(layout, pckr) + 1);
+	else
+		rate = parent_rate >> PROG_PRES(layout, pckr);
+
+	return rate;
 }
 
 static int clk_programmable_determine_rate(struct clk_hw *hw,
 					   struct clk_rate_request *req)
 {
+	struct clk_programmable *prog = to_clk_programmable(hw);
+	const struct clk_programmable_layout *layout = prog->layout;
 	struct clk_hw *parent;
 	long best_rate = -EINVAL;
 	unsigned long parent_rate;
-	unsigned long tmp_rate;
+	unsigned long tmp_rate = 0;
 	int shift;
 	int i;
 
@@ -60,11 +68,19 @@ static int clk_programmable_determine_rate(struct clk_hw *hw,
 			continue;
 
 		parent_rate = clk_hw_get_rate(parent);
-		for (shift = 0; shift < PROG_PRES_MASK; shift++) {
+		if (layout->is_pres_direct) {
+			for (shift = 0; shift <= layout->pres_mask; shift++) {
+				tmp_rate = parent_rate / (shift + 1);
+				if (tmp_rate <= req->rate)
+					break;
+			}
+		} else {
+			for (shift = 0; shift < layout->pres_mask; shift++) {
 				tmp_rate = parent_rate >> shift;
 				if (tmp_rate <= req->rate)
 					break;
 			}
+		}
 
 		if (tmp_rate > req->rate)
 			continue;
@@ -137,16 +153,23 @@ static int clk_programmable_set_rate(struct clk_hw *hw, unsigned long rate,
 	if (!div)
 		return -EINVAL;
 
+	if (layout->is_pres_direct) {
+		shift = div - 1;
+
+		if (shift > layout->pres_mask)
+			return -EINVAL;
+	} else {
 		shift = fls(div) - 1;
 
 		if (div != (1 << shift))
 			return -EINVAL;
 
-	if (shift >= PROG_PRES_MASK)
+		if (shift >= layout->pres_mask)
 			return -EINVAL;
+	}
 
 	regmap_update_bits(prog->regmap, AT91_PMC_PCKR(prog->id),
-			   PROG_PRES_MASK << layout->pres_shift,
+			   layout->pres_mask << layout->pres_shift,
 			   shift << layout->pres_shift);
 
 	return 0;
@@ -202,19 +225,25 @@ at91_clk_register_programmable(struct regmap *regmap,
 }
 
 const struct clk_programmable_layout at91rm9200_programmable_layout = {
+	.pres_mask = 0x7,
 	.pres_shift = 2,
 	.css_mask = 0x3,
 	.have_slck_mck = 0,
+	.is_pres_direct = 0,
 };
 
 const struct clk_programmable_layout at91sam9g45_programmable_layout = {
+	.pres_mask = 0x7,
 	.pres_shift = 2,
 	.css_mask = 0x3,
 	.have_slck_mck = 1,
+	.is_pres_direct = 0,
 };
 
 const struct clk_programmable_layout at91sam9x5_programmable_layout = {
+	.pres_mask = 0x7,
 	.pres_shift = 4,
 	.css_mask = 0x7,
 	.have_slck_mck = 0,
+	.is_pres_direct = 0,
 };

drivers/clk/at91/pmc.h

@@ -71,9 +71,11 @@ struct clk_pll_characteristics {
 };
 
 struct clk_programmable_layout {
+	u8 pres_mask;
 	u8 pres_shift;
 	u8 css_mask;
 	u8 have_slck_mck;
+	u8 is_pres_direct;
 };
 
 extern const struct clk_programmable_layout at91rm9200_programmable_layout;

drivers/clk/at91/sama5d2.c

@@ -125,6 +125,14 @@ static const struct {
 	  .pll = true },
 };
 
+static const struct clk_programmable_layout sama5d2_programmable_layout = {
+	.pres_mask = 0xff,
+	.pres_shift = 4,
+	.css_mask = 0x7,
+	.have_slck_mck = 0,
+	.is_pres_direct = 1,
+};
+
 static void __init sama5d2_pmc_setup(struct device_node *np)
 {
 	struct clk_range range = CLK_RANGE(0, 0);
@@ -249,7 +257,7 @@ static void __init sama5d2_pmc_setup(struct device_node *np)
 
 		hw = at91_clk_register_programmable(regmap, name,
 						    parent_names, 6, i,
-						    &at91sam9x5_programmable_layout);
+						    &sama5d2_programmable_layout);
 		if (IS_ERR(hw))
 			goto err_free;
 	}

drivers/clk/imx/clk-pll14xx.c

@@ -362,7 +362,7 @@ struct clk *imx_clk_pll14xx(const char *name, const char *parent_name,
 
 	switch (pll_clk->type) {
 	case PLL_1416X:
-		if (!pll->rate_table)
+		if (!pll_clk->rate_table)
 			init.ops = &clk_pll1416x_min_ops;
 		else
 			init.ops = &clk_pll1416x_ops;

drivers/clk/mediatek/clk-gate.c

@@ -169,11 +169,10 @@ struct clk *mtk_clk_register_gate(
 		return ERR_PTR(-ENOMEM);
 
 	init.name = name;
-	init.flags = CLK_SET_RATE_PARENT;
+	init.flags = flags | CLK_SET_RATE_PARENT;
 	init.parent_names = parent_name ? &parent_name : NULL;
 	init.num_parents = parent_name ? 1 : 0;
 	init.ops = ops;
-	init.flags = flags;
 
 	cg->regmap = regmap;
 	cg->set_ofs = set_ofs;

drivers/clk/meson/clk-pll.c

@@ -120,7 +120,7 @@ static bool meson_clk_pll_is_better(unsigned long rate,
 			return true;
 	} else {
 		/* Round down */
-		if (now < rate && best < now)
+		if (now <= rate && best < now)
 			return true;
 	}
 

drivers/clk/meson/g12a.c

@@ -960,14 +960,14 @@ static struct clk_regmap g12a_sd_emmc_c_clk0 = {
 /* VPU Clock */
 
 static const char * const g12a_vpu_parent_names[] = {
-	"fclk_div4", "fclk_div3", "fclk_div5", "fclk_div7",
+	"fclk_div3", "fclk_div4", "fclk_div5", "fclk_div7",
 	"mpll1", "vid_pll", "hifi_pll", "gp0_pll",
 };
 
 static struct clk_regmap g12a_vpu_0_sel = {
 	.data = &(struct clk_regmap_mux_data){
 		.offset = HHI_VPU_CLK_CNTL,
-		.mask = 0x3,
+		.mask = 0x7,
 		.shift = 9,
 	},
 	.hw.init = &(struct clk_init_data){
@@ -1011,7 +1011,7 @@ static struct clk_regmap g12a_vpu_0 = {
 static struct clk_regmap g12a_vpu_1_sel = {
 	.data = &(struct clk_regmap_mux_data){
 		.offset = HHI_VPU_CLK_CNTL,
-		.mask = 0x3,
+		.mask = 0x7,
 		.shift = 25,
 	},
 	.hw.init = &(struct clk_init_data){

drivers/clk/meson/gxbb.c

@@ -2216,6 +2216,7 @@ static struct clk_regmap gxbb_vdec_1_div = {
 		.offset = HHI_VDEC_CLK_CNTL,
 		.shift = 0,
 		.width = 7,
+		.flags = CLK_DIVIDER_ROUND_CLOSEST,
 	},
 	.hw.init = &(struct clk_init_data){
 		.name = "vdec_1_div",
@@ -2261,6 +2262,7 @@ static struct clk_regmap gxbb_vdec_hevc_div = {
 		.offset = HHI_VDEC2_CLK_CNTL,
 		.shift = 16,
 		.width = 7,
+		.flags = CLK_DIVIDER_ROUND_CLOSEST,
 	},
 	.hw.init = &(struct clk_init_data){
 		.name = "vdec_hevc_div",

drivers/clk/meson/vid-pll-div.c

@@ -82,8 +82,8 @@ static unsigned long meson_vid_pll_div_recalc_rate(struct clk_hw *hw,
 	div = _get_table_val(meson_parm_read(clk->map, &pll_div->val),
 			     meson_parm_read(clk->map, &pll_div->sel));
 	if (!div || !div->divider) {
-		pr_info("%s: Invalid config value for vid_pll_div\n", __func__);
-		return parent_rate;
+		pr_debug("%s: Invalid config value for vid_pll_div\n", __func__);
+		return 0;
 	}
 
 	return DIV_ROUND_UP_ULL(parent_rate * div->multiplier, div->divider);

drivers/clk/x86/clk-pmc-atom.c

@@ -165,7 +165,7 @@ static const struct clk_ops plt_clk_ops = {
 };
 
 static struct clk_plt *plt_clk_register(struct platform_device *pdev, int id,
-					void __iomem *base,
+					const struct pmc_clk_data *pmc_data,
 					const char **parent_names,
 					int num_parents)
 {
@@ -184,9 +184,17 @@ static struct clk_plt *plt_clk_register(struct platform_device *pdev, int id,
 	init.num_parents = num_parents;
 
 	pclk->hw.init = &init;
-	pclk->reg = base + PMC_CLK_CTL_OFFSET + id * PMC_CLK_CTL_SIZE;
+	pclk->reg = pmc_data->base + PMC_CLK_CTL_OFFSET + id * PMC_CLK_CTL_SIZE;
 	spin_lock_init(&pclk->lock);
 
+	/*
+	 * On some systems, the pmc_plt_clocks already enabled by the
+	 * firmware are being marked as critical to avoid them being
+	 * gated by the clock framework.
+	 */
+	if (pmc_data->critical && plt_clk_is_enabled(&pclk->hw))
+		init.flags |= CLK_IS_CRITICAL;
+
 	ret = devm_clk_hw_register(&pdev->dev, &pclk->hw);
 	if (ret) {
 		pclk = ERR_PTR(ret);
@@ -332,7 +340,7 @@ static int plt_clk_probe(struct platform_device *pdev)
 		return PTR_ERR(parent_names);
 
 	for (i = 0; i < PMC_CLK_NUM; i++) {
-		data->clks[i] = plt_clk_register(pdev, i, pmc_data->base,
+		data->clks[i] = plt_clk_register(pdev, i, pmc_data,
 						 parent_names, data->nparents);
 		if (IS_ERR(data->clks[i])) {
 			err = PTR_ERR(data->clks[i]);

drivers/platform/x86/pmc_atom.c

@@ -17,6 +17,7 @@
 
 #include <linux/debugfs.h>
 #include <linux/device.h>
+#include <linux/dmi.h>
 #include <linux/init.h>
 #include <linux/io.h>
 #include <linux/platform_data/x86/clk-pmc-atom.h>
@@ -391,11 +392,27 @@ static int pmc_dbgfs_register(struct pmc_dev *pmc)
 }
 #endif /* CONFIG_DEBUG_FS */
 
+/*
+ * Some systems need one or more of their pmc_plt_clks to be
+ * marked as critical.
+ */
+static const struct dmi_system_id critclk_systems[] = {
+	{
+		.ident = "MPL CEC1x",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "MPL AG"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "CEC10 Family"),
+		},
+	},
+	{ /*sentinel*/ }
+};
+
 static int pmc_setup_clks(struct pci_dev *pdev, void __iomem *pmc_regmap,
 			  const struct pmc_data *pmc_data)
 {
 	struct platform_device *clkdev;
 	struct pmc_clk_data *clk_data;
+	const struct dmi_system_id *d = dmi_first_match(critclk_systems);
 
 	clk_data = kzalloc(sizeof(*clk_data), GFP_KERNEL);
 	if (!clk_data)
@@ -403,6 +420,10 @@ static int pmc_setup_clks(struct pci_dev *pdev, void __iomem *pmc_regmap,
 
 	clk_data->base = pmc_regmap; /* offset is added by client */
 	clk_data->clks = pmc_data->clks;
+	if (d) {
+		clk_data->critical = true;
+		pr_info("%s critclks quirk enabled\n", d->ident);
+	}
 
 	clkdev = platform_device_register_data(&pdev->dev, "clk-pmc-atom",
 					       PLATFORM_DEVID_NONE,

include/linux/platform_data/x86/clk-pmc-atom.h

@@ -35,10 +35,13 @@ struct pmc_clk {
  *
  * @base:	PMC clock register base offset
  * @clks:	pointer to set of registered clocks, typically 0..5
+ * @critical:	flag to indicate if firmware enabled pmc_plt_clks
+ *		should be marked as critial or not
  */
 struct pmc_clk_data {
 	void __iomem *base;
 	const struct pmc_clk *clks;
+	bool critical;
 };
 
 #endif /* __PLATFORM_DATA_X86_CLK_PMC_ATOM_H */